summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/rt2x00/rt2800lib.c
AgeCommit message (Expand)Author
2010-10-05rt2x00: Work around hw aggregation oddity in rt2800Helmut Schaa
2010-10-05rt2x00: Enable rx aggregation in rt2800Helmut Schaa
2010-10-05rt2x00: Improve TX status entry validationIvo van Doorn
2010-10-05rt2x00: correctly set max_report_rates in rt61pci and rt2800Helmut Schaa
2010-10-05rt2x00: Don't enable broad- and multicast buffering on USB devicesHelmut Schaa
2010-10-05rt2x00: Don't initialize MM40 HT protection to RTS/CTS on PCI devicesHelmut Schaa
2010-10-05rt2x00: Implement HT protection for rt2800Helmut Schaa
2010-10-05rt2x00: Split out parts of the rt2800_txdone function for easier reuseHelmut Schaa
2010-10-05rt2x00: Don't overwrite beacon buffers in pairwise key setupHelmut Schaa
2010-09-14rt2x00: Check for specific changed flags when updating the erp configHelmut Schaa
2010-09-14rt2x00: Initialize AMPDU_BA_WINSIZE registerHelmut Schaa
2010-08-31rt2x00: Don't set unicast/BSSID masks when clearning MAC or BSSIDIvo van Doorn
2010-08-31rt2x00: Wakeup hardware before loading firmwareIvo van Doorn
2010-08-31rt2x00: Validate TX status results with current data entryIvo van Doorn
2010-08-31rt2x00: Add rt2800_wait_csr_readyIvo van Doorn
2010-08-31rt2x00: Rename txentry_desc.queue -> txentry_desc.qidHelmut Schaa
2010-08-25rt2x00: Fix max TX power settingsIvo van Doorn
2010-08-25rt2x00: Fix channel configuration for RF3052Ivo van Doorn
2010-08-25rt2x00: Merge rt2800{pci/usb} radio enabling/disabling code to rt2800libIvo van Doorn
2010-08-25rt2x00: Fix rt2800 retry calculationIvo van Doorn
2010-08-16rt2x00: Remove ieee80211_rx_status from rt2x00_devIvo van Doorn
2010-08-16rt2x00: Implement TX status reporting for rt2800usbIvo van Doorn
2010-08-16rt2x00: Request TXWI pointer from driverIvo van Doorn
2010-08-16rt2x00: Set MIMO PS flag in tx descriptor for STAs in dynamic SMPS modeIvo van Doorn
2010-07-12rt2x00: Move common firmware loading into rt2800libIvo van Doorn
2010-07-12rt2x00: Add missing TSF sync mode for AP operationHelmut Schaa
2010-07-12rt2x00: Don't initialize beacon interval to 0 on rt2800 devicesHelmut Schaa
2010-07-12rt2x00: Use separate mac80211_ops for rt2800pci and rt2800usbHelmut Schaa
2010-07-12rt2x00: Use pretbtt irq for fetching beacons on rt2800pciHelmut Schaa
2010-07-12rt2x00: Make rt2800_write_beacon only export to GPLIvo van Doorn
2010-07-12rt2x00: Disable link tuning while scanningIvo van Doorn
2010-07-12rt2x00: Convert AGC value from descriptor to RSSI (dBm)Ivo van Doorn
2010-07-12rt2x00: Limit txpower by eeprom valuesHelmut Schaa
2010-06-30rt2x00: Fix compile warning when debug disabledIvo van Doorn
2010-06-30rt2x00: Always set BBP_CSR_CFG_BBP_RW_MODE to 1Ivo van Doorn
2010-06-30rt2x00: Fix antenna initializationIvo van Doorn
2010-06-30rt2x00: Fix IEEE80211_HT_CAP_RX_STBC assignmentIvo van Doorn
2010-06-30rt2x00: fix beacon reset on rt2800Helmut Schaa
2010-06-30rt2x00: Enable multiBSS in rt2800Ivo van Doorn
2010-06-30rt2x00: Align rt2800 EEPROM validation to Ralink vendor driver.Gertjan van Wingerde
2010-06-30rt2x00: Implement tx mpdu aggregationHelmut Schaa
2010-06-15rt2x00: Synchronize WCID initialization with legacy driverIvo van Doorn
2010-06-15rt2x00: Update author rt2800libIvo van Doorn
2010-06-15rt2x00: provide mac80211 a suitable max_rates valueHelmut Schaa
2010-06-15rt2x00: Fix typo in rt2800_config_txpowerHelmut Schaa
2010-06-03rt2x00: Remove suspicious register writeHelmut Schaa
2010-06-03rt2x00: Update TX_SW_CFG initvals for 305x SoCHelmut Schaa
2010-06-03rt2x00: rt2800: disable TX STBC for 1 stream devicesHelmut Schaa
2010-06-03rt2x00: Fix HT40 operation in rt2800.Gertjan van Wingerde
2010-06-03rt2x00: Move PCI/USB specific register initializations to rt2800{pci,usb}.Gertjan van Wingerde
generated by cgit (git 2.34.1) at 2025-03-21 09:10:27 +0000