summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2023-04-14wifi: iwlwifi: Fix spelling mistake "upto" -> "up to"Colin Ian King
There is a spelling mistake in a IWL_ERR error message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230414130637.a00965734d02.I760cb43829b3d7a0f567f0958059f2fae0aa8a93@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: enable new MLD FW APIMiri Korenblit
Enable the new FW API with MLD based on FW TLV. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230414130637.5dc66b08539e.I1c65024c879346b0349e1e431d36ec2b5fd85dd7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: add a new PCI device ID for BZ deviceMukesh Sisodiya
Add support for a new PCI device ID 0x272b once registering with PCIe. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230414130637.56342664110d.I5aa6f2858fdcf69fdea4f1a873115a48bd43764e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: Add RF Step Type for BZ deviceMukesh Sisodiya
Add RF step id handling and handle for BZ device. Read CNV Aux register and uses for no OTP case. Add missing rf support for Bz/Bnj device and correct/add the mapping for rf-type if OTP not present. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230414130637.8f2e2fff7bbc.Iee5554178bc5f134dcc28591db0968e619afbdca@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: scan legacy bands and UHB channels with same antennaAyala Beker
In case of UHB scan that follows a scan on legacy bands, consider both scan commands as part of the same scan cycle, and thus configure them to use the same antenna configuration. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.fd582c423ad8.I35239f94cb3ee1642d16936199c336a07ec2df8f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: yoyo: Fix possible division by zeroDaniel Gabay
Don't allow buffer allocation TLV with zero req_size since it leads later to division by zero in iwl_dbg_tlv_alloc_fragments(). Also, NPK/SRAM locations are allowed to have zero buffer req_size, don't discard them. Fixes: a9248de42464 ("iwlwifi: dbg_ini: add TLV allocation new API support") Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.5d6688ed74d8.I5c2f3a882b50698b708d54f4524dc5bdf11e3d32@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: yoyo: skip dump correctly on hw errorDaniel Gabay
When NIC is in a bad state, reading data will return 28 bits as 0xa5a5a5a and the lowest 4 bits are not fixed value. Mask these bits in a few places to skip the dump correctly. Fixes: 89639e06d0f3 ("iwlwifi: yoyo: support for new DBGI_SRAM region") Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.df6c0663179d.I36d8487b2419c6fefa65e5514855d94327c3b1eb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: pcie: fix possible NULL pointer dereferenceDaniel Gabay
It is possible that iwl_pci_probe() will fail and free the trans, then afterwards iwl_pci_remove() will be called and crash by trying to access trans which is already freed, fix it. iwlwifi 0000:01:00.0: Detected crf-id 0xa5a5a5a2, cnv-id 0xa5a5a5a2 wfpm id 0xa5a5a5a2 iwlwifi 0000:01:00.0: Can't find a correct rfid for crf id 0x5a2 ... BUG: kernel NULL pointer dereference, address: 0000000000000028 ... RIP: 0010:iwl_pci_remove+0x12/0x30 [iwlwifi] pci_device_remove+0x3e/0xb0 device_release_driver_internal+0x103/0x1f0 driver_detach+0x4c/0x90 bus_remove_driver+0x5c/0xd0 driver_unregister+0x31/0x50 pci_unregister_driver+0x40/0x90 iwl_pci_unregister_driver+0x15/0x20 [iwlwifi] __exit_compat+0x9/0x98 [iwlwifi] __x64_sys_delete_module+0x147/0x260 Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.082f6e21341b.I0db21d7fa9a828d571ca886713bd0b5d0b6e1e5c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: Fix the duplicate dump nameMukesh Sisodiya
Driver is using the dump name generated first time in all generated dump in case of NMI. The validity of dump name should be with each dump created and need to reset after each use. Fixes: 834f920ef34b ("wifi: iwlwifi: yoyo: Add driver defined dump file name") Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.6c987f820557.I924f2eae1eef2fe82c7a23be566551653d46f729@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: pcie: work around ROM bug on AX210 integratedJohannes Berg
On 22000 and AX210 devices, there's a ROM bug that causes it to set invalid LTR settings. On 22000 and AX210 non-integrated we can fix up these settings from the driver (as done in the code here), but on AX210 integrated these registers are not available to the driver. Attempt to work around the issue by spinning while the IML is being loaded, the IML will then reprogram the LTR values itself after it's loaded, so only the brief IML load (which the ROM is doing) is affected. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.aaa0a4339984.If08da23e960b6236f8c05c06fc8b26041ac89f1e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: add DSM_FUNC_ENABLE_6E value to debugfsJohannes Berg
In order to simplify checking that this value was set up correctly, add it to debugfs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.c9a787710e1e.If509b2e510e22d62f3eefb2c54ff1645e331dc23@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: cleanup beacon_inject_active during hw restartMiri Korenblit
beacon_inject_active turns true and false via debugfs when we inject a beacon. During the time of the beacon injection we can't configure the FW with a beacon cmd. If we have a hw restart during the beacon injection then in the recovery flow we will not be able to configure the beacon cmd to the FW. Fix this by cleaning up this variable after an hw restart. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.b021bce5e162.Ia5a0a0b5d8734f63077ceaac936176a345f8d3d1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: support wowlan info notification version 2Haim Dreyfuss
As part of version 2 we don't need to have wake_packet_bufsize and wake_packet_length. The first one is already calculated by the driver, the latter is sent as part of the wake packet notification. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.3b53213b10d4.Ibf2f15aca614def2d262dd267d1aad65931b58f1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: make HLTK configuration for PASN station optionalAvraham Stern
When secure LTF is not used, the HLTK is not derived during the PASN authentication. Make the HLTK optional when adding a PASN station. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.a57f7f3b59bd.Ifa88afb51a2516156153ac321d81556e295036c2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: request limiting to 8 MSDUs per A-MSDUJohannes Berg
Due to hardware limitations when splitting up A-MSDUs, it cannot handle an arbitrary number of MSDUs per A-MSDU. Set the bits to ask transmitters to send only 8 MSDUs in one A-MSDU. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.e6c518f2724f.I15c13d13b38289edbcd64f67d57cf18f6026457a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: fix shift-out-of-boundsAvraham Stern
The aux queue is initialized to IWL_MVM_INVALID_QUEUE. This is later used for a bitmask of the queue, which results in a shift-out-of-bounds. Fix it. Fixes: b85f7ebb2497 ("wifi: iwlwifi: mvm: avoid UB shift of snif_queue") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.c41a33c32898.Idc15f9eed005345a4137c28ef62efd80a405fad0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: acpi: support modules with high antenna gainAlon Giladi
Starting from version 4 of ANT_GAIN_CMD verification of ppag table values is done by the FW. Driver has to send the complete table as it appears in the BIOS. Make this change. Signed-off-by: Alon Giladi <alon.giladi@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.a965365e2336.I1081f00ae309d9225d0529fa2da6ba7e34a8bd4f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: mvm: don't drop unencrypted MCAST framesAyala Beker
MCAST frames are filtered out by the driver if we are not authorized yet. Fix it to filter out only protected frames. Fixes: 147eb05f24e6 ("iwlwifi: mvm: always tell the firmware to accept MCAST frames in BSS") Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.9cedcc27db60.I8fb7057981392660da482dd215e85c15946d3f4b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-14wifi: iwlwifi: dbg: print pc register data once fw dump occurredMukesh Sisodiya
Add debug print for different FW program counter details of different CPU. Program counter pc details will be read from TLV during init. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413213309.862790d336a9.I34e2ea05a79e8b2552f7f221bacf3af0166cb9c0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: ieee80211: correctly mark FTM frames non-bufferableJohannes Berg
The checks of whether or not a frame is bufferable were not taking into account that some action frames aren't, such as FTM. Check this, which requires some changes to the function ieee80211_is_bufferable_mmpdu() since we need the whole skb for the checks now. Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: don't set CHECKSUM_COMPLETE for unsupported protocolsAvraham Stern
On Bz devices, CHECKSUM_COMPLETE was set for unsupported protocols which results in a warning. Fix it. Fixes: b6f5b647f694 ("iwlwifi: mvm: handle RX checksum on Bz devices") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.a2a35286f0ca.I50daa9445a6465514c44f5096c32adef64beba5f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: trans: don't trigger d3 interrupt twiceAvraham Stern
When the IPC registers are used for sleep control, setting the IPC sleep bit already triggers an interrupt to the fw, so there is no need to also set the doorbell. Setting also the doorbell triggers the sleep interrupt twice which lead to an assert. Fixes: af08571d3925 ("iwlwifi: pcie: support Bz suspend/resume trigger") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.b5f2f6e44d38.I4cb5b6ad4914db47a714e731c4c8b4db679cabce@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: Update configurations for Bnj-a0 and specific rf devicesMukesh Sisodiya
Correction in config data is done for loading the ucode. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.879b654c8d83.I7dbea9f411a0b6f47908c4ad6321c7e55cbeb636@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: Update init sequence if tx diversity supportedMukesh Sisodiya
PHY configuration command need to be sent to FW if the tx diversity with SISO is supported. This need to be sent to get the init notification from FW. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.c2121c8694a7.Ibee3dd8765ef4b7504660fa228a7c7eff78920af@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: move function sequenceMukesh Sisodiya
Need to move a function definition and actual changes will be done in following commit. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.00a6c203712f.I7c099e5c1954f1daa5a5039b98149b6f081e46ae@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: nvm: Update HE capabilities on 6GHz band for EHT deviceDaniel Gabay
Max A-MPDU length exponent shall be set to 2 for EHT capable device on 6GHz band in order to support 4MB aggregation. Update HE MAC capabilities accordingly for station and softap interfaces. This change requires to add another ieee80211_sband_iftype_data for uhb since high/uhb are no longer the same. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.1eee32cfd199.I9c5ff3a6956d509137deca620814935149516fbc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: refactor TX csum mode checkJohannes Berg
There are two modes now, and we have two places checking that must be in sync. Refactor the logic into a new small helper function. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.ef6246f4b73b.I44820ec095634dd0bba3007465cf25e4ce1c77c6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: fix A-MSDU checksJohannes Berg
Since Gl A-step devices use the old checksum hardware, we shouldn't use the Bz code to check for A-MSDU combining ability; fix that. Fixes: ec18e7d4d20d ("wifi: iwlwifi: mvm: use old checksum for Bz A-step") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.8c445b943fee.Ibf772102ca712f59e2ee0cdd4c344011fcf445aa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: enable bz hw checksum from c stepGolan Ben Ami
B step doesn't support full checksum yet, move to c step. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.697a9d74e84d.I6724874112692a04e29287cac9dad7140532557f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: use OFDM rate if IEEE80211_TX_CTL_NO_CCK_RATE is setAvraham Stern
IEEE80211_TX_CTL_NO_CCK_RATE indicates that CCK rates should not be used, but is ignored by the driver. Fix it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.a322d18b5eb1.Icc46027a03f90feffb6fab49a5d82e54829d3dd9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: mvm: convert TID to FW value on queue removeJohannes Berg
On queue remove, we should convert the TID value to the firmware value (8 -> 15) just like we do on queue add. Otherwise, the firmware will not be able to find the correct queue to remove. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.6651077eaec3.Ia6868c8fc1a92063609bb057b6a618726712d0bb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: Update configuration for SO,SOF MAC and HR RFMukesh Sisodiya
update the device configuration for HR1 device for SO and SOF device. QuZ device configuration is corrected to support specific CRF. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.86f08520323f.Ieccb50de47f877b85732000a0d67b645eeeb0c2a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: add a validity check of queue_id in iwl_txq_reclaimMiri Korenblit
This function receives the queue id to reclaim packets from. Currently we're passing to it the queue id we received from the FW in the flush response. We don't do any check of this value and it might be invalid. In such case we will refer to a pointer to a queue which might be NULL. Fix this by adding a validity check of the queue id before using it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.a9c3fd32bce7.I5fbdcf3b1b80eb96a907116c166f19dc0aae7cb8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: nvm-parse: enable 160/320 MHz for AP modeJohannes Berg
Initially, 160/320 MHz in AP mode were not supported. After testing, enable the wider bandwidths in AP mode as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.ed04de3a2833.Ie3991179dfaf24880b96a0904a625dbf6b8fd579@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-13wifi: iwlwifi: debug: fix crash in __iwl_err()Johannes Berg
In __iwl_err(), if we rate-limit the message away, then vaf.va is still NULL-initialized by the time we get to the tracing code, which then crashes. When it doesn't get rate-limited out, it's still wrong to reuse the old args2 that was already printed, which is why we bother making a copy in the first place. Assign vaf.va properly to fix this. Fixes: e5f1cc98cc1b ("iwlwifi: allow rate-limited error messages") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230413102635.e27134c6bcd4.Ib3894cd2ba7a5ad5e75912a7634f146ceaa569e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-04-12wifi: rtw88: Add support for the SDIO based RTL8821CS chipsetMartin Blumenstingl
Wire up RTL8821CS chipset support using the new rtw88 SDIO HCI code as well as the existing RTL8821C chipset code. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-10-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: Add support for the SDIO based RTL8822CS chipsetMartin Blumenstingl
Wire up RTL8822CS chipset support using the new rtw88 SDIO HCI code as well as the existing RTL8822C chipset code. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-9-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: Add support for the SDIO based RTL8822BS chipsetJernej Skrabec
Wire up RTL8822BS chipset support using the new rtw88 SDIO HCI code as well as the existing RTL8822B chipset code. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-8-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: main: Reserve 8 bytes of extra TX headroom for SDIO cardsMartin Blumenstingl
For SDIO host controllers with DMA support the TX buffer physical memory address need to be aligned at an 8-byte boundary. Reserve 8 bytes of extra TX headroom so we can align the data without re-allocating the transmit buffer. While here, also remove the TODO comment regarding extra headroom for USB and SDIO. For SDIO the extra headroom is now handled and for USB it was not needed so far. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-6-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: main: Add the {cpwm,rpwm}_addr for SDIO based chipsetsMartin Blumenstingl
Initialize the rpwm_addr and cpwm_addr for power-saving support on SDIO based chipsets. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-5-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: mac: Support SDIO specific bits in the power on sequenceMartin Blumenstingl
Add the code specific to SDIO HCI in the MAC power on sequence. This is based on the RTL8822BS and RTL8822CS vendor drivers. Co-developed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-4-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsetsMartin Blumenstingl
Add a sub-driver for SDIO based chipsets which implements the following functionality: - register accessors for 8, 16 and 32 bits for all states of the card (including usage of 4x 8 bit access for one 32 bit buffer if the card is not fully powered on yet - or if it's fully powered on then 1x 32 bit access is used) - checking whether there's space in the TX FIFO queue to transmit data - transfers from the host to the device for actual network traffic, reserved pages (for firmware download) and H2C (host-to-card) transfers - receiving data from the device - deep power saving state The transmit path is optimized so DMA-capable SDIO host controllers can directly use the buffers provided because the buffer's physical addresses are 8 byte aligned. The receive path is prepared to support RX aggregation where the chipset combines multiple MAC frames into one bigger buffer to reduce SDIO transfer overhead. Co-developed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-3-martin.blumenstingl@googlemail.com
2023-04-12wifi: rtw88: Clear RTW_FLAG_POWERON early in rtw_mac_power_switch()Martin Blumenstingl
The SDIO HCI implementation needs to know when the MAC is powered on. This is needed because 32-bit register access has to be split into 4x 8-bit register access when the MAC is not fully powered on or while powering off. When the MAC is powered on 32-bit register access can be used to reduce the number of transfers but splitting into 4x 8-bit register access still works in that case. During the power on sequence is how RTW_FLAG_POWERON is only set when the power on sequence has completed successfully. During power off however RTW_FLAG_POWERON is set. This means that the upcoming SDIO HCI implementation does not know that it has to use 4x 8-bit register accessors. Clear the RTW_FLAG_POWERON flag early when powering off the MAC so the whole power off sequence is processed with RTW_FLAG_POWERON unset. This will make it possible to use the RTW_FLAG_POWERON flag in the upcoming SDIO HCI implementation. Note that a failure in rtw_pwr_seq_parser() while applying chip->pwr_off_seq can theoretically result in the RTW_FLAG_POWERON flag being cleared while the chip is still powered on. However, depending on when the failure occurs in the power off sequence the chip may be on or off. Even the original approach of clearing RTW_FLAG_POWERON only when the power off sequence has been applied successfully could end up in some corner case where the chip is powered off but RTW_FLAG_POWERON was not cleared. Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230405200729.632435-2-martin.blumenstingl@googlemail.com
2023-04-12wifi: ath12k: Remove redundant pci_clear_masterCai Huoqing
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230323112613.7550-3-cai.huoqing@linux.dev
2023-04-12wifi: ath10k: Remove redundant pci_clear_masterCai Huoqing
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230323112613.7550-2-cai.huoqing@linux.dev
2023-04-12wifi: ath11k: Remove redundant pci_clear_masterCai Huoqing
Remove pci_clear_master to simplify the code, the bus-mastering is also cleared in do_pci_disable_device, like this: ./drivers/pci/pci.c:2197 static void do_pci_disable_device(struct pci_dev *dev) { u16 pci_command; pci_read_config_word(dev, PCI_COMMAND, &pci_command); if (pci_command & PCI_COMMAND_MASTER) { pci_command &= ~PCI_COMMAND_MASTER; pci_write_config_word(dev, PCI_COMMAND, pci_command); } pcibios_disable_device(dev); }. And dev->is_busmaster is set to 0 in pci_disable_device. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230323112613.7550-1-cai.huoqing@linux.dev
2023-04-12wifi: ath11k: Send 11d scan start before WMI_START_SCAN_CMDIDManikanta Pubbisetty
Firmwares advertising the support of triggering 11d algorithm on the scan results of a regular scan expects driver to send WMI_11D_SCAN_START_CMDID before sending WMI_START_SCAN_CMDID. Triggering 11d algorithm on the scan results of a normal scan helps in completely avoiding a separate 11d scan for determining regdomain. This indirectly helps in speeding up connections on station interfaces on the chipsets supporting 11D scan. To enable this feature, send WMI_11D_SCAN_START_CMDID just before sending WMI_START_SCAN_CMDID if the firmware advertises WMI_TLV_SERVICE_SUPPORT_11D_FOR_HOST_SCAN service flag. WCN6750 & WCN6855 supports this feature. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01160-QCAMSLSWPLZ-1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230315161817.29627-1-quic_mpubbise@quicinc.com
2023-04-12wifi: ath11k: fix writing to unintended memory regionP Praneesh
While initializing spectral, the magic value is getting written to the invalid memory address leading to random boot-up crash. This occurs due to the incorrect index increment in ath11k_dbring_fill_magic_value function. Fix it by replacing the existing logic with memset32 to ensure there is no invalid memory access. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1 Fixes: d3d358efc553 ("ath11k: add spectral/CFR buffer validation support") Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230321052900.16895-1-quic_ppranees@quicinc.com
2023-04-12wifi: ath11k: Fix invalid management rx frame length issueBhagavathi Perumal S
The WMI management rx event has multiple arrays of TLVs, however the common WMI TLV parser won't handle multiple TLV tags of same type. So the multiple array tags of WMI management rx TLV is parsed incorrectly and the length calculated becomes wrong when the target sends multiple array tags. Add separate TLV parser to handle multiple arrays for WMI management rx TLV. This fixes invalid length issue when the target sends multiple array tags. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by: Nagarajan Maran <quic_nmaran@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230320133840.30162-1-quic_nmaran@quicinc.com
2023-04-12wifi: ath11k: fix rssi station dump not updated in QCN9074P Praneesh
In QCN9074, station dump signal values display default value which is -95 dbm, since there is firmware header change for HAL_RX_MPDU_START between QCN9074 and IPQ8074 which cause wrong peer_id fetch from msdu. Fix this by updating hal_rx_mpdu_info with corresponding QCN9074 tlv format. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01695-QCAHKSWPL_SILICONZ-1 Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230320110312.20639-1-quic_ppranees@quicinc.com
generated by cgit (git 2.34.1) at 2025-09-24 02:23:00 +0000