summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2024-06-26wifi: iwlwifi: don't assume op_mode_nic_config existsEmmanuel Grumbach
The new op_mode won't have this callback. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20240618194245.718983e7b832.I02fb130aa3d2044958cba7dced357031b92e33bb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: bump FW API to 92 for BZ/SC devicesMiri Korenblit
Start supporting API version 92 for new devices. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618194245.433cfbb6f042.I914da5bd0e2ed25148726f9fb55e7a60b895edfd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: trans: remove unused function parameterMiri Korenblit
iwl_trans_pcie_gen2_fw_alive doesn't use the scd_addr parameter, it was there only because we needed the functio to have a prototype same as iwl_trans_ops::fw_alive callback. But now the ops is removed so no reason to keep the parameter. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://patch.msgid.link/20240618194245.1aa8bf13aea9.I9662c10c1db545dd8849af4bb4ab47708d4548d8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: mvm: remove IWL_MVM_PARSE_NVMMiri Korenblit
This debug is not in use anymore. Remove it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://patch.msgid.link/20240618194245.bded22049fae.I980c4a941d769f93cf74bfc90a7d7d9fb384dea1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: support fast resumeEmmanuel Grumbach
This will allow to suspend / resume the system without resetting the firmware. This will allow to reduce the resume time. In case the fast_resume fails, stop the device and bring it up from scratch. Raise the timeout for the D3_END notification since in some iterations, it took 240ms. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618194245.03b8d2801044.I613d17c712de7a0d611cde4e14f37ebbe0c3c964@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: fix iwl_mvm_get_valid_rx_ant()Daniel Gabay
Fix incorrect use of _tx_ valid ant data in the function. Fixes: 4ea1ed1d14d8 ("wifi: iwlwifi: mvm: support set_antenna()") Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618200104.b7c6a320c7dc.I3092eb5275056f2162b9694e583c310c38568b2a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: mvm: unify and fix interface combinationsJohannes Berg
AP interfaces fundamentally cannot leave the channel, so multi- channel operation with them isn't really possible. We shouldn't advertise support for such, at least not as long as we don't have full multi-radio support. Thus, remove the AP bit from the interface combinations for two channels and add another set for just one channel that has it. Also, to avoid duplicating everything even more, unify the NAN and non-NAN cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618200104.3213638262ef.I2a0031b37623d7763fd0c5405477ea7206a3e923@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: iwlwifi: pcie: fix a few legacy register accesses for new devicesEmmanuel Grumbach
Do not access legacy bits for new devices, this has no effect. Somehow, wowlan worked despite the usage of the wrong bits. Now that we want to keep the firmware loaded during suspend even without wowlan, this change is needed. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618200104.399d4d215210.Id12e7fdb7bab9f2c4c0d292519b5c1b4753a8c84@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-26wifi: mac80211: inform the low level if drv_stop() is a suspendEmmanuel Grumbach
This will allow the low level driver to take different actions for different flows. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-24wifi: ath12k: handle keepalive during WoWLAN suspend and resumeBaochen Qiang
With WoWLAN enabled and after sleeping for a rather long time, we are seeing that with some APs, it is not able to wake up the STA though the correct wake up pattern has been configured. This is because the host doesn't send keepalive command to firmware, thus firmware will not send any packet to the AP and after a specific time the AP kicks out the STA. So enable keepalive before going to suspend and disable it after resume back. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240604055407.12506-9-quic_bqiang@quicinc.com
2024-06-24wifi: ath12k: support GTK rekey offloadBaochen Qiang
Host sets GTK related info to firmware before WoW is enabled, and gets rekey replay_count and then disables GTK rekey when WoW quits. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240604055407.12506-8-quic_bqiang@quicinc.com
2024-06-24wifi: ath12k: support ARP and NS offloadBaochen Qiang
Support ARP and NS offload in WoW state. Tested this way: put machine A with QCA6390 to WoW state, ping/ping6 machine A from another machine B, check sniffer to see any ARP response and Neighbor Advertisement from machine A. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240604055407.12506-7-quic_bqiang@quicinc.com
2024-06-24wifi: ath12k: implement hardware data filterBaochen Qiang
Host needs to set hardware data filter before entering WoW to let firmware drop needless broadcast/multicast frames to avoid frequent wakeup. Host clears hardware data filter when leaving WoW. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240604055407.12506-6-quic_bqiang@quicinc.com
2024-06-24wifi: ath12k: add WoW net-detect functionalityBaochen Qiang
Implement net-detect feature by setting flag WIPHY_WOWLAN_NET_DETECT if firmware supports this feature. Driver sets the related PNO configuration to firmware before entering WoW and firmware then scans periodically and wakes up host if a specific SSID is found. Note that firmware crashes if we enable it for both P2P vdev and station vdev simultaneously because firmware can only support one vdev at a time. Since there is rare scenario for a P2P vdev to do net-detect, skip it for P2P vdevs. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240604055407.12506-5-quic_bqiang@quicinc.com
2024-06-24wifi: ath12k: add basic WoW functionalitiesBaochen Qiang
Implement basic WoW functionalities such as magic-packet, disconnect and pattern. The logic is very similar to ath11k. When WoW is configured, ath12k_core_suspend and ath12k_core_resume are skipped (by checking ar->state) as we are not allowed to power cycle firmware. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240604055407.12506-4-quic_bqiang@quicinc.com
2024-06-24wifi: ath12k: implement WoW enable and wakeup commandsBaochen Qiang
Implement WoW enable and WoW wakeup commands which are needed for suspend/resume. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240604055407.12506-3-quic_bqiang@quicinc.com
2024-06-24wifi: ath12k: add ATH12K_DBG_WOW log levelBaochen Qiang
Currently there is no dedicated log level for WoW, so create it for future use. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240604055407.12506-2-quic_bqiang@quicinc.com
2024-06-21wifi: rtl8xxxu: use swap() in rtl8xxxu_switch_ports()Jiapeng Chong
Use existing swap() function rather than duplicating its implementation. ./drivers/net/wireless/realtek/rtl8xxxu/core.c:6749:30-31: WARNING opportunity for swap(). Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9358 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20240619024017.53246-1-jiapeng.chong@linux.alibaba.com
2024-06-21wifi: rtw88: usb: Further limit the TX aggregationBitterblue Smith
Currently the number of frames sent to the chip in a single USB Request Block is limited only by the size of the TX buffer, which is 20 KiB. Testing reveals that as many as 13 frames get aggregated. This is more than what any of the chips would like to receive. RTL8822CU, RTL8822BU, and RTL8821CU want at most 3 frames, and RTL8723DU wants only 1 frame per URB. RTL8723DU in particular reliably malfunctions during a speed test if it receives more than 1 frame per URB. All traffic seems to stop. Pinging the AP no longer works. Fix this problem by limiting the number of frames sent to the chip in a single URB according to what each chip likes. Also configure RTL8822CU, RTL8822BU, and RTL8821CU to expect 3 frames per URB. RTL8703B may or may not be found in USB devices. Declare that it wants only 1 frame per URB, just in case. Tested with RTL8723DU and RTL8811CU. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/cb46ea35-7e59-4742-9c1f-01ceeaad36fb@gmail.com
2024-06-20wifi: mt76: un-embedd netdev from mt76_devBreno Leitao
Embedding net_device into structures prohibits the usage of flexible arrays in the net_device structure. For more details, see the discussion at [1]. Un-embed the net_devices from struct mt76_dev by converting them into pointers, and allocating them dynamically. Use the leverage alloc_netdev_dummy() to allocate the net_device object at mt76_dma_init(). The free of the device occurs at mt76_dma_cleanup(). Link: https://lore.kernel.org/all/20240229225910.79e224cf@kernel.org/ [1] Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240619105311.3144908-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c 1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error") 165f87691a89 ("bnxt_en: add timestamping statistics support") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-19wifi: ath12k: fix mbssid max interface advertisementKarthikeyan Periyasamy
The Current method for advertising the maximum MBSSID interface count assumes single radio per wiphy (multi wiphy model). However, this assumption is incorrect for multi radio per wiphy (single wiphy model). Therefore, populate the parameter for each radio present in the MAC abstraction layer (ah). This approach ensure scalability for both single wiphy and multi wiphy models. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: 519a545cfee7 ("wifi: ath12k: advertise driver capabilities for MBSSID and EMA") Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240613153813.3509837-1-quic_periyasa@quicinc.com
2024-06-19wifi: ath12k: fix firmware crash due to invalid peer nssAjith C
Currently, if the access point receives an association request containing an Extended HE Capabilities Information Element with an invalid MCS-NSS, it triggers a firmware crash. This issue arises when EHT-PHY capabilities shows support for a bandwidth and MCS-NSS set for that particular bandwidth is filled by zeros and due to this, driver obtains peer_nss as 0 and sending this value to firmware causes crash. Address this issue by implementing a validation step for the peer_nss value before passing it to the firmware. If the value is greater than zero, proceed with forwarding it to the firmware. However, if the value is invalid, reject the association request to prevent potential firmware crashes. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ajith C <quic_ajithc@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240613053528.2541645-1-quic_ajithc@quicinc.com
2024-06-19wifi: ath12k: fix legacy peer association due to missing HT or 6 GHz ↵Pradeep Kumar Chitrapu
capabilities Currently SMPS configuration failed when the Information Elements (IEs) did not contain HT or 6 GHz capabilities. This caused legacy peer association to fail as legacy peers do not have HT or 6 GHz capabilities. Fix this by not returning an error when SMPS configuration fails due to the absence of HT or 6 GHz capabilities. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: f0e61dc7ecf9 ("wifi: ath12k: refactor SMPS configuration") Reported-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Reported-by: Zachary Smith <dr.z.smith@gmail.com> Closes: https://lore.kernel.org/all/CAM=znoFPcXrn5GhDmDmo50Syic3-hXpWvD+vkv8KX5o_ZTo8kQ@mail.gmail.com/ Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Reported-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240612225336.2303119-1-quic_pradeepc@quicinc.com
2024-06-19wifi: ath12k: fix uninitialize symbol error on ath12k_peer_assoc_h_he()Aaradhana Sahu
Smatch throws following errors drivers/net/wireless/ath/ath12k/mac.c:1922 ath12k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'. drivers/net/wireless/ath/ath12k/mac.c:1922 ath12k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_160'. drivers/net/wireless/ath/ath12k/mac.c:1924 ath12k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'. In ath12k_peer_assoc_h_he() rx_mcs_80 and rx_mcs_160 variables remain uninitialized in the following conditions: 1. Whenever the value of mcs_80 become equal to IEEE80211_HE_MCS_NOT_SUPPORTED then rx_mcs_80 remains uninitialized. 2. Whenever phy capability is not supported 160 channel width and value of mcs_160 become equal to IEEE80211_HE_MCS_NOT_SUPPORTED then rx_mcs_160 remains uninitialized. Initialize these variables during declaration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240611031017.297927-3-quic_aarasahu@quicinc.com
2024-06-19wifi: ath12k: fix NULL pointer access in ath12k_mac_op_get_survey()Aaradhana Sahu
Smatch throws below error drivers/net/wireless/ath/ath12k/mac.c:8318 ath12k_mac_op_get_survey() error: we previously assumed 'sband' could be null Currently, we access sband inside the null check of the sband in ath12k_mac_op_get_survey(). Fix this issue by removing the entire if block, because decrement idx is unnecessary since there are no more band to test. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: 70e3be54bbdd ("wifi: ath12k: fix survey dump collection in 6 GHz") Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240611031017.297927-2-quic_aarasahu@quicinc.com
2024-06-19wifi: ath11k: modify the calculation of the average signal strength in ↵Lingbo Kong
station mode Currently, the calculation of the average signal strength in station mode is incorrect. This is because before calculating the average signal strength, ath11k need to determine whether the hardware and firmware support db2dbm, if the hardware and firmware support db2dbm, do not need to add noise floor, otherwise, need to add noise floor. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240309121129.5379-1-quic_lingbok@quicinc.com
2024-06-19wifi: ath11k: fix ack signal strength calculationLingbo Kong
Currently, the calculation of ack signal strength is incorrect. This is because before calculating the ack signal strength, ath11k need to determine whether the hardware and firmware support db2dbm. If the hardware and firmware support db2dbm, do not need to add noise floor, otherwise, need to add noise floor. Besides, the value of ack_rssi passed by firmware to ath11k should be a signed number, so change its type to s8. After that, "iw wlan0 station dump" show the correct ack signal strength. Such as: root@CDCCSTEX0799733-LIN:~# iw wlp88s0 station dump Station 00:03:7f:12:df:df (on wlp88s0) inactive time: 75 ms rx bytes: 11599 rx packets: 99 tx bytes: 9029 tx packets: 81 tx retries: 4 tx failed: 0 rx drop misc: 2 signal: -16 dBm signal avg: -24 dBm tx bitrate: 1560.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 4 tx duration: 9230 us rx bitrate: 1560.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 4 rx duration: 7201 us last ack signal:-23 dBm avg ack signal: -22 dBm Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240611022550.59078-1-quic_lingbok@quicinc.com
2024-06-18wifi: wilc1000: disable SDIO func IRQ before suspendAlexis Lothoré
Issuing a system suspend command raises the following warning: WARNING: CPU: 0 PID: 15 at drivers/mmc/core/sdio.c:1042 mmc_sdio_suspend+0xd4/0x19c CPU: 0 PID: 15 Comm: kworker/u2:1 Not tainted 6.7.0-rc1-wt+ #710 Hardware name: Atmel SAMA5 Workqueue: events_unbound async_run_entry_fn unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from __warn+0x98/0x160 __warn from warn_slowpath_fmt+0xcc/0x140 warn_slowpath_fmt from mmc_sdio_suspend+0xd4/0x19c mmc_sdio_suspend from mmc_bus_suspend+0x50/0x70 mmc_bus_suspend from dpm_run_callback+0xe4/0x248 dpm_run_callback from __device_suspend+0x234/0x91c __device_suspend from async_suspend+0x24/0x9c async_suspend from async_run_entry_fn+0x6c/0x210 async_run_entry_fn from process_one_work+0x3a0/0x870 [...] This warning is due to a check in SDIO core ensuring that interrupts do not remain enabled for cards being powered down during suspend. WILC driver currently does not set the MMC_PM_KEEP_POWER flag, so disable interrupt when entering resume. Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240613-wilc_suspend-v1-6-c2f766d0988c@bootlin.com
2024-06-18wifi: wilc1000: remove suspend/resume from cfg80211 partAlexis Lothoré
WILC1000 suspend/resume implementation is currently composed of two parts: suspend/resume ops implemented in cfg80211 ops, which merely sets a flag, and suspend/resume ops in sdio/spi driver which, based on this flag, execute or not the suspend/resume mechanism. This dual set of ops is not really needed , so keep only the sdio part to implement suspend/resume. While doing so, remove the now unused suspend_event flag. Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240613-wilc_suspend-v1-5-c2f766d0988c@bootlin.com
2024-06-18wifi: wilc1000: move sdio suspend method next to resume and pm ops definitionAlexis Lothoré
Just move the suspend method next to the resume method in the sdio part Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240613-wilc_suspend-v1-4-c2f766d0988c@bootlin.com
2024-06-18wifi: wilc1000: do not keep sdio bus claimed during suspend/resumeAlexis Lothoré
There is no reason to keep the MMC host claimed during suspend. Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240613-wilc_suspend-v1-3-c2f766d0988c@bootlin.com
2024-06-18wifi: wilc1000: let host->chip suspend/resume notifications manage chip ↵Alexis Lothoré
wake/sleep host_wakeup_notify and host_sleep_notify are surrounded by chip_wakeup and chip_allow_sleep calls, which theorically need to be protected with the hif_cs lock. This lock protection is currently missing. Instead of adding the lock where those two functions are called, move those in host->chip suspend notifications to benefit from the lock already used there (in bus_acquire/bus_release) Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240613-wilc_suspend-v1-2-c2f766d0988c@bootlin.com
2024-06-18wifi: wilc1000: disable power sequencerAjay Singh
Driver systematically disables some power mechanism each time it starts the chip firmware (so mostly when interface is brought up). This has a negative impact on some specific scenarios when the chip is exposed as a hotpluggable SDIO card (eg: WILC1000 SD): - when executing suspend/resume sequence while interface has been brought up - rebooting the platform while module is plugged and interface has been brought up Those scenarios lead to mmc core trying to initialize again the chip which is now unresponsive (because of the power sequencer setting), so it fails in mmc_rescan->mmc_attach_sdio and enter a failure loop while trying to send CMD5: mmc0: error -110 whilst initialising SDIO card mmc0: error -110 whilst initialising SDIO card mmc0: error -110 whilst initialising SDIO card [...] Preventing the driver from disabling this "power sequencer" fixes those enumeration issues without affecting nominal operations. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240613-wilc_suspend-v1-1-c2f766d0988c@bootlin.com
2024-06-18wifi: wl18xx: allow firmwares > 8.9.0.x.58Russell King (Oracle)
wlcore firmware versions are structured thusly: chip.if-type.major.sub-type.minor e.g. 8 9 0 0 58 With WL18xx ignoring the major firmware version, looking for a firmware version that conforms to: chip >= 8 if-type >= 9 major (don't care) sub-type (don't care) minor >= 58 Each test is satisfied if the value read from the firmware is greater than the minimum, but if it is equal (or we don't care about the field), then the next field is checked. Thus it doesn't recognise 8.9.1.x.0 as being newer than 8.9.0.x.58 since the major and sub-type numbers are "don't care" and the minor needs to be greater or equal to 58. We need to change the major version from "ignore" to "0" for this later firmware to be correctly detected, and allow the dual-firmware version support to work. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sBsyH-00E8w6-Vu@rmk-PC.armlinux.org.uk
2024-06-18wifi: wl18xx: add support for reading 8.9.1 fw statusRussell King (Oracle)
Add the necessary code to read the 8.9.1 firmware status into the driver private status structure, augmenting the 8.9.0 firmware status code. New structure layout taken from: https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0023-wlcore-Fixing-PN-drift-on-encrypted-link-after-recov.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7 Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sBsyC-00E8w0-Rz@rmk-PC.armlinux.org.uk
2024-06-18wifi: wlcore: add pn16 supportRussell King (Oracle)
TI Wl18xx firmware adds a "pn16" field for AES and TKIP keys as per their patch: https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0023-wlcore-Fixing-PN-drift-on-encrypted-link-after-recov.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7 Add support for this, but rather than requiring the field to be present (which would break existing firmwares), make it optional. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sBsy7-00E8vu-Nc@rmk-PC.armlinux.org.uk
2024-06-18wifi: wlcore: store AP encryption key typeRussell King (Oracle)
Updates for WL18xx firmware 8.9.1.x.x need to know the AP encryption key type. Store this when a new key is set. Patch extracted from: https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0023-wlcore-Fixing-PN-drift-on-encrypted-link-after-recov.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7 Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sBsy2-00E8vo-KK@rmk-PC.armlinux.org.uk
2024-06-18wifi: wlcore: pass "status" to wlcore_hw_convert_fw_status()Russell King (Oracle)
wlcore_fw_status() is passed a pointer to the struct wl_fw_status to decode the status into, which is always wl->fw_status. Rather than referencing wl->fw_status within wlcore_fw_status(), use the supplied argument so that we access this member in a consistent manner. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sBsxx-00E8vi-Gf@rmk-PC.armlinux.org.uk
2024-06-18wifi: wlcore: improve code in wlcore_fw_status()Russell King (Oracle)
Referring to status->counters.tx_lnk_free_pkts[i] multiple times leads to less efficient code. Cache this value in a local variable. This also makes the code clearer. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sBsxs-00E8vc-DD@rmk-PC.armlinux.org.uk
2024-06-18wifi: wl18xx: make wl18xx_tx_immediate_complete() more efficientRussell King (Oracle)
wl18xx_tx_immediate_complete() iterates through the completed transmit descriptors in a circular fashion, and in doing so uses a modulus operation that is not a power of two. This leads to inefficient code generation, which can be easily solved by providing a helper to increment to the next descriptor. Use this more efficient solution. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sBsxn-00E8vW-9h@rmk-PC.armlinux.org.uk
2024-06-18wifi: wlcore: correctness fix fwlog readingRussell King (Oracle)
Fix the calculation of clear_offset, which may overflow the end of the buffer. However, this is harmless if it does because in that case it will be recalculated when we copy the chunk of messages at the start of the buffer. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sBsxi-00E8vQ-5r@rmk-PC.armlinux.org.uk
2024-06-18wifi: wlcore: fix wlcore AP modeRussell King (Oracle)
Using wl183x devices in AP mode with various firmwares is not stable. The driver currently adds a station to firmware with basic rates when it is first known to the stack using the CMD_ADD_PEER command. Once the station has finished authorising, another CMD_ADD_PEER command is issued to update the firmware with the rates the station can use. However, after a random amount of time, the firmware ignores the power management nullfunc frames from the station, and tries to send packets while the station is asleep, resulting in lots of retries dropping down in rate due to no response. This restricts the available bandwidth. With this happening with several stations, the user visible effect is the latency of interactive connections increases significantly, packets get dropped, and in general the WiFi connections become unreliable and unstable. Eventually, the firmware transmit queue appears to get stuck - with packets and blocks allocated that never clear. TI have a couple of patches that address this, but they touch the mac80211 core to disable NL80211_FEATURE_FULL_AP_CLIENT_STATE for *all* wireless drivers, which has the effect of not adding the station to the stack until later when the rates are known. This is a sledge hammer approach to solving the problem. The solution implemented here has the same effect, but without impacting all drivers. We delay adding the station to firmware until it has been authorised in the driver, and correspondingly remove the station when unwinding from authorised state. Adding the station to firmware allocates a hlid, which will now happen later than the driver expects. Therefore, we need to track when this happens so that we transmit using the correct hlid. This patch is an equivalent fix to these two patches in TI's wilink8-wlan repository: https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0004-mac80211-patch.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7 https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0005-wlcore-patch.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7 Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Co-developed-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/E1sClp4-00Evu7-8v@rmk-PC.armlinux.org.uk
2024-06-17wifi: ath12k: Remove unused ath12k_base from ath12k_hwHarshitha Prem
Currently, device (ab) reference in hardware abstraction (ah) is not used anywhere. Also, with multiple device group abstraction, hardware abstraction would be coupled with device group abstraction rather than single device. Hence, remove the ab reference from hardware abstraction. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240529060939.4156281-1-quic_hprem@quicinc.com
2024-06-17wifi: ath12k: Fix WARN_ON during firmware crash in split-phyAaradhana Sahu
Whenever firmware is crashed in split-phy below WARN_ON() triggered: WARNING: CPU: 3 PID: 82 at net/mac80211/driver-ops.c:41 drv_stop+0xac/0xbc Modules linked in: ath12k qmi_helpers CPU: 3 PID: 82 Comm: kworker/3:2 Tainted: G D W 6.9.0-next-20240520-00113-gd981a3784e15 #39 Hardware name: Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9 (DT) Workqueue: events_freezable ieee80211_restart_work pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drv_stop+0xac/0xbc lr : ieee80211_stop_device+0x54/0x64 sp : ffff8000848dbb20 x29: ffff8000848dbb20 x28: 0000000000000790 x27: ffff000014d78900 x26: ffff000014d791f8 x25: ffff000007f0d9b0 x24: 0000000000000018 x23: 0000000000000001 x22: 0000000000000000 x21: ffff000014d78e10 x20: ffff800081dc0000 x19: ffff000014d78900 x18: ffffffffffffffff x17: ffff7fffbca84000 x16: ffff800083fe0000 x15: ffff800081dc0b48 x14: 0000000000000076 x13: 0000000000000076 x12: 0000000000000001 x11: 0000000000000000 x10: 0000000000000a60 x9 : ffff8000848db980 x8 : ffff000000dddfc0 x7 : 0000000000000400 x6 : ffff800083b012d8 x5 : ffff800083b012d8 x4 : 0000000000000000 x3 : ffff000014d78398 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000014d78900 Call trace: drv_stop+0xac/0xbc ieee80211_stop_device+0x54/0x64 ieee80211_do_stop+0x5a0/0x790 ieee80211_stop+0x4c/0x178 __dev_close_many+0xb0/0x150 dev_close_many+0x88/0x130 dev_close.part.171+0x44/0x74 dev_close+0x1c/0x28 cfg80211_shutdown_all_interfaces+0x44/0xfc ieee80211_restart_work+0xfc/0x14c process_scheduled_works+0x18c/0x2dc worker_thread+0x13c/0x314 kthread+0x118/0x124 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- The warning in question is from drv_stop(): if (WARN_ON(!local->started)) return; The sequence of WARN_ON() is: Thread 1: -Firmware crash calls ath12k_core_reset(). -Call ieee80211_restart_hw() inside ath12k_core_post_reconfigure_recovery() which schedules worker for both hardware. -Wait for completion of ab->recovery_start. Thread 2 (worker thread): -One hardware acquires rtnl_lock() inside ieee80211_restart_hw() and calls ath12k_mac_wait_reconfigure() into ath12k_mac_op_start(). -Hardware is waiting for ab->reconfigure_complete but at this time recovery_start_count value is 1 because another worker thread (local->restart_work) is still waiting for rtnl_lock(). recovery_start_count is not equal to number of radios (2 in split-phy). So ab->recovery_start complete does not set due to this, thread 1 is still waiting and not able to perform hif power down up and firmware reload. -Wait timeout happens for ab->reconfigure_complete and comeback to caller (ath12k_mac_op_start()) and sends WMI command to crashed firmware and gets error. -This returns error to drv_start() and local->started is set to false. -Hardware calls cfg80211_shutdown_all_interfaces() after receiving error inside ieee80211_restart_work() and goes to drv_stop(), here we trigger WARN_ON as local->started is false. To fix this issue call ieee80211_restart_hw() after firmware has been reloaded. Now, each hardware can send WMI command to firmware successfully. With this fix we don't need to wait for ab->recovery_start completion so remove ath12k_mac_wait_reconfigure(). Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 HW2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240529034405.2863150-1-quic_aarasahu@quicinc.com
2024-06-17wifi: rtw89: pci: fix RX tag race condition resulting in wrong RX lengthPing-Ke Shih
Read 32 bits RX info to a local variable to fix race condition between reading RX length and RX tag. Another solution is to get RX tag at first statement, but adopted solution can save some memory read, and also save 15 bytes binary code. RX tag, a sequence number, is used to ensure that RX data has been DMA to memory completely, so driver must check sequence number is expected before reading other data. This potential problem happens only after enabling 36-bit DMA. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240611021901.26394-2-pkshih@realtek.com
2024-06-17wifi: rtw89: pci: support 36-bit PCI DMA addressPing-Ke Shih
Modern platforms can install more than 4GB memory, so DMA address can larger than 32 bits. If a platform doesn't enable IOMMU, kernel needs extra works of swiotlb to help DMA that packets reside on memory over 4GB. The DMA addressing capability of Realtek WiFi chips is 36 bits, so set LSB 4 bits of high 32-bit address to register and TX/RX descriptor, which below figure shows 3-level pointers in TX direction, and RX direction is similar but 2-level pointers only. +--------+ | | register to head of TX BD +---|----+ | +---------+ +-----> | TX BD | (in memory) +----|----+ | +---------+ +------> | TX WD | (in memory) +----|----+ | +--------+ +------> | skb | +--------+ Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240611021901.26394-1-pkshih@realtek.com
2024-06-17wifi: rtw89: adopt firmware whose version is equal or less but closestPing-Ke Shih
Version C of 8922AE hardware will use the same firmware of version B, so extend rule of firmware recognition to allow less but closest firmware version. Originally only accept firmware with matched version. Tested on version A/B/C of 8922AE. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240607140251.8295-1-pkshih@realtek.com
2024-06-17wifi: rtw89: 885xbx: apply common settings to 8851B, 8852B and 8852BTPing-Ke Shih
Many common settings can share to 8851B, 8852B and 8852BT, so add an inline function rtw89_is_rtl885xb() to be concise. Meanwhile review and align settings for existing chips. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240607070659.80263-4-pkshih@realtek.com
2024-06-17wifi: rtw89: 8852bx: add extra handles for 8852BT in 8852b_commonPing-Ke Shih
The channel configuration of 8852BT is very similar but a little different to 8852B, so use chip ID as condition to add extra handles including external loss compensation, ADC configurations, spur settings and so on. Don't affect existing 8852BE. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240607070659.80263-3-pkshih@realtek.com
generated by cgit (git 2.34.1) at 2025-09-23 10:36:21 +0000