summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2024-06-10Merge tag 'wireless-next-2024-06-07' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 The first "new features" pull request for v6.11 with changes both in stack and in drivers. Nothing out of ordinary, except that we have two conflicts this time: net/mac80211/cfg.c https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au drivers/net/wireless/microchip/wilc1000/netdev.c https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au Major changes: cfg80211/mac80211 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers wilc1000 * read MAC address during probe to make it visible to user space iwlwifi * bump FW API to 91 for BZ/SC devices * report 64-bit radiotap timestamp * enable P2P low latency by default * handle Transmit Power Envelope (TPE) advertised by AP * start using guard() rtlwifi * RTL8192DU support ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets * tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits) wifi: ath12k: add hw_link_id in ath12k_pdev wifi: ath12k: add panic handler wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity() wifi: brcm80211: remove unused structs wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type) wifi: ath12k: do not process consecutive RDDM event dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() wifi: rtlwifi: handle return value of usb init TX/RX wifi: rtlwifi: Enable the new rtl8192du driver wifi: rtlwifi: Add rtl8192du/sw.c wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg wifi: rtlwifi: Add rtl8192du/dm.{c,h} wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h} wifi: rtlwifi: Add rtl8192du/rf.{c,h} wifi: rtlwifi: Add rtl8192du/trx.{c,h} wifi: rtlwifi: Add rtl8192du/phy.{c,h} wifi: rtlwifi: Add rtl8192du/hw.{c,h} wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU wifi: rtlwifi: Add rtl8192du/table.{c,h} ... Signed-off-by: Jakub Kicinski <kuba@kernel.org> ==================== Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-05Merge tag 'ath-next-20240605' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath ath.git patches for v6.11 ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets
2024-06-05Merge tag 'rtw-next-2024-06-04' of https://github.com/pkshih/rtwKalle Valo
rtw-next patches for v6.11 Some fixes and refactors of rtlwifi, rtw88 and rtw89. Only one major change listed below: rtlwifi: - add new chip support of RTL8192DU
2024-06-03wifi: ath12k: add hw_link_id in ath12k_pdevKarthikeyan Periyasamy
Currently, hw_link_id is sent in WMI service ready event but it is not parsed anywhere. But, in future, for multi-link operation, this parameter would be needed by many WMI commands such as WMI beacon template (WMI_BCN_TMPL_CMDID), WMI vdev start for Multi-link virtual AP interfaces (WMI_VDEV_START_REQUEST_CMDID), WMI peer assoc command (WMI_PEER_ASSOC_CMDID) for Multi-link peer and so on. Hence, add changes to parse and store the hw_link_id received in WMI service ready event in ath12k_pdev structure. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240529054955.4105240-1-quic_hprem@quicinc.com
2024-06-03wifi: ath12k: add panic handlerBaochen Qiang
Currently for ath12k PCI devices, firmware could be running in one of several execution environments, e.g., PBL, SBL and mission mode etc. Among which PBL is the only stage where PCIe link negotiation could happen. So normally firmware runs in PBL in order to be enumerated during system reboot. However it might not work in kernel crash scenario: ath12k target is not found after warm reboot from kernel crash. This is because when kernel crashes, ath12k host does nothing to firmware. And during warm reboot, WLAN power is sustained. So firmware is likely to keep running in mission mode throughout the bootup process. As a result PCIe link is not established and thus target not enumerated. So add a handler in panic notification list for ath12k. When kernel crashes, this handler gets called and tries to reset target to PBL state. Then PCIe link negotiation could happen and target gets enumerated. This change applies to all PCI devices including WCN7850 and QCN9274. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240529021533.10861-1-quic_bqiang@quicinc.com
2024-06-03wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()Jiapeng Chong
Use existing swap() function instead of keeping duplicate source code. ./drivers/net/wireless/realtek/rtw89/chan.c:2336:32-33: WARNING opportunity for swap(). Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9174 Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240529020244.129027-1-jiapeng.chong@linux.alibaba.com
2024-06-01wifi: rtlwifi: Ignore IEEE80211_CONF_CHANGE_RETRY_LIMITSBitterblue Smith
Since commit 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers") ieee80211_hw_config() is no longer called with changed = ~0. rtlwifi relied on ~0 in order to ignore the default retry limits of 4/7, preferring 48/48 in station mode and 7/7 in AP/IBSS. RTL8192DU has a lot of packet loss with the default limits from mac80211. Fix it by ignoring IEEE80211_CONF_CHANGE_RETRY_LIMITS completely, because it's the simplest solution. Link: https://lore.kernel.org/linux-wireless/cedd13d7691f4692b2a2fa5a24d44a22@realtek.com/ Cc: stable@vger.kernel.org # 6.9.x Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/1fabb8e4-adf3-47ae-8462-8aea963bc2a5@gmail.com
2024-06-01wifi: brcm80211: remove unused structsDr. David Alan Gilbert
'brcmf_pcie_core_info' was added in commit 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.") but never used. 'brcms_c_bit_desc' last use was removed in commit cdf4352f5c59 ("brcmsmac: Improve tx trace and debug support"). Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240526234553.286773-1-linux@treblig.org
2024-06-01wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)Erick Archer
It is preferred to use sizeof(*pointer) instead of sizeof(type) due to the type of the variable can change and one needs not change the former (unlike the latter). This patch has no effect on runtime behavior. At the same time remove some redundant NULL initializations. Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Erick Archer <erick.archer@outlook.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/AS8PR02MB7237FF1C2E880D1231684D708BF02@AS8PR02MB7237.eurprd02.prod.outlook.com
2024-06-01wifi: mt76: mt7615: add missing chanctx opsJohannes Berg
Here's another one I missed during the initial conversion, fix that. Cc: stable@vger.kernel.org Reported-by: Rene Petersen <renepetersen@posteo.de> Fixes: 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218895 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240528142308.3f7db1821e68.I531135d7ad76331a50244d6d5288e14aa9668390@changeid
2024-06-01wifi: wilc1000: document SRCU usage instead of SRCUAlexis Lothoré
Commit f236464f1db7 ("wifi: wilc1000: convert list management to RCU") attempted to convert SRCU to RCU usage, assuming it was not really needed. The runtime issues that arose after merging it showed that there are code paths involving sleeping functions, and removing those would need some heavier driver rework. Add some documentation about SRCU need to make sure that any future developer do not miss some use cases if tempted to convert back again to RCU. Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-3-bce096e0798c@bootlin.com
2024-06-01Revert "wifi: wilc1000: set atomic flag on kmemdup in srcu critical section"Alexis Lothoré
This reverts commit 35aee01ff43d7eb6c2caa0b94e7cc6c45baeeab7 Commit 35aee01ff43d ("wifi: wilc1000: set atomic flag on kmemdup in srcu critical section") was preparatory to the SRCU to RCU conversion done by commit f236464f1db7 ("wifi: wilc1000: convert list management to RCU"). This conversion brought issues and so has been reverted, so the atomic flag is not needed anymore. Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-2-bce096e0798c@bootlin.com
2024-06-01Revert "wifi: wilc1000: convert list management to RCU"Alexis Lothoré
This reverts commit f236464f1db7bea80075e6e31ac70dc6eb80547f Commit f236464f1db7 ("wifi: wilc1000: convert list management to RCU") replaced SRCU with RCU, aiming to simplify RCU usage in the driver. No documentation or commit history hinted about why SRCU has been preferred in original design, so it has been assumed to be safe to do this conversion. Unfortunately, some static analyzers raised warnings, confirmed by runtime checker, not long after the merge. At least three different issues arose when switching to RCU: - wilc_wlan_txq_filter_dup_tcp_ack is executed in a RCU read critical section yet calls wait_for_completion_timeout - wilc_wfi_init_mon_interface calls kmalloc and register_netdevice while manipulating a vif retrieved from vif list - set_channel sends command to chip (and so, also waits for a completion) while holding a vif retrieved from vif list (so, in RCU read critical section) Some of those issues are not trivial to fix and would need bigger driver rework. Fix those issues by reverting the SRCU to RCU conversion commit Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-wireless/3b46ec7c-baee-49fd-b760-3bc12fb12eaf@moroto.mountain/ Fixes: f236464f1db7 ("wifi: wilc1000: convert list management to RCU") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-1-bce096e0798c@bootlin.com
2024-06-01Merge tag 'ath-current-20240531' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath Merge ath-current from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git ath.git fixes for 6.10. Two fixes for user reported regressions in ath11k. One dependency fix and one error path fix.
2024-05-30wifi: ath12k: do not process consecutive RDDM eventBaochen Qiang
Currently we do reset for each RDDM event from MHI, however there are cases, see below log, that we get two or more consecutive events, and it is pointless to do reset for the subsequent ones. What's more, it makes reset process more likely to fail. [ 103.289864] mhi mhi0: System error detected [ 103.289871] ath12k_pci 0000:03:00.0: mhi notify status reason MHI_CB_EE_RDDM [ 103.293144] mhi mhi0: System error detected [ 103.293150] ath12k_pci 0000:03:00.0: mhi notify status reason MHI_CB_EE_RDDM Add a check to avoid reset again and again. This is done by tracking previous MHI status: if we receive a new RDDM event while the previous event is also the same, we treat it as duplicate and ignore it, because normally we should at least receive a MHI_CB_EE_MISSION_MODE event between them. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240529015357.9846-1-quic_bqiang@quicinc.com
2024-05-30wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()Baochen Qiang
Currently the resource allocated by crypto_alloc_shash() is not freed in case ath12k_peer_find() fails, resulting in memory leak. Add crypto_free_shash() to fix it. This is found during code review, compile tested only. Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240526124226.24661-1-quic_bqiang@quicinc.com
2024-05-30wifi: rtlwifi: handle return value of usb init TX/RXPing-Ke Shih
Handle error code to cause failed to USB probe result from unexpected USB EP number, otherwise when USB disconnect skb_dequeue() an uninitialized skb list and cause warnings below. usb 2-1: USB disconnect, device number 76 INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 PID: 54060 Comm: kworker/0:1 Not tainted 6.9.0-rc7 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:114 assign_lock_key kernel/locking/lockdep.c:976 [inline] register_lock_class+0xc18/0xfa0 kernel/locking/lockdep.c:1289 __lock_acquire+0x108/0x3bc0 kernel/locking/lockdep.c:5014 lock_acquire kernel/locking/lockdep.c:5754 [inline] lock_acquire+0x1b0/0x550 kernel/locking/lockdep.c:5719 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162 skb_dequeue+0x20/0x180 net/core/skbuff.c:3846 rtl_usb_cleanup drivers/net/wireless/realtek/rtlwifi/usb.c:706 [inline] rtl_usb_deinit drivers/net/wireless/realtek/rtlwifi/usb.c:721 [inline] rtl_usb_disconnect+0x4a4/0x850 drivers/net/wireless/realtek/rtlwifi/usb.c:1051 usb_unbind_interface+0x1e8/0x980 drivers/usb/core/driver.c:461 device_remove drivers/base/dd.c:568 [inline] device_remove+0x122/0x170 drivers/base/dd.c:560 __device_release_driver drivers/base/dd.c:1270 [inline] device_release_driver_internal+0x443/0x620 drivers/base/dd.c:1293 bus_remove_device+0x22f/0x420 drivers/base/bus.c:574 device_del+0x395/0x9f0 drivers/base/core.c:3909 usb_disable_device+0x360/0x7b0 drivers/usb/core/message.c:1418 usb_disconnect+0x2db/0x930 drivers/usb/core/hub.c:2305 hub_port_connect drivers/usb/core/hub.c:5362 [inline] hub_port_connect_change drivers/usb/core/hub.c:5662 [inline] port_event drivers/usb/core/hub.c:5822 [inline] hub_event+0x1e39/0x4ce0 drivers/usb/core/hub.c:5904 process_one_work+0x97b/0x1a90 kernel/workqueue.c:3267 process_scheduled_works kernel/workqueue.c:3348 [inline] worker_thread+0x680/0xf00 kernel/workqueue.c:3429 kthread+0x2c7/0x3b0 kernel/kthread.c:388 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Reported-by: Shichao Lai <shichaorai@gmail.com> Closes: https://lore.kernel.org/linux-wireless/CAEk6kZuuezkH1dVRJf3EAVZK-83=OpTz62qCugkpTkswj8JF6w@mail.gmail.com/T/#u Tested-by: Shichao Lai <shichaorai@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240524003248.5952-1-pkshih@realtek.com
2024-05-30wifi: rtlwifi: Enable the new rtl8192du driverBitterblue Smith
The RTL8192DU is an older Wifi 4 dual band chip. It comes in two flavours: single MAC single PHY (like most Realtek Wifi 4 USB devices), and dual MAC dual PHY. The single MAC single PHY version is 2T2R and can work either in the 2.4 GHz band or the 5 GHz band. The dual MAC dual PHY version has two USB interfaces and appears to the system as two separate 1T1R Wifi devices, one working in the 2.4 GHz band, the other in the 5 GHz band. This was tested only with a single MAC single PHY device, mostly in station mode. The speeds in the 2.4 GHz band with 20 MHz channel width are similar to the out-of-tree driver: 85/51 megabits/second. Stefan Lippers-Hollmann tested the speed in the 5 GHz band with 40 MHz channel width: 173/99 megabits/second. It was also tested briefly in AP mode. It's emitting beacons and my phone can connect to it. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/5f2da7ee-876a-42fc-8fec-ec5386fa8c26@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/sw.cBitterblue Smith
This contains the new module's entry point. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/1fdc83ac-4a6f-4645-8837-6e38683b6c84@gmail.com
2024-05-30wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfgBitterblue Smith
This allows the drivers to declare the structs rtl_hal_cfg, rtl_hal_ops, and rtl_hal_usbint_cfg as const. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/1b29994f-3d07-4297-875d-57c3a87a1ec6@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/dm.{c,h}Bitterblue Smith
These contain functions related to the dynamic mechanism, which runs every two seconds to adjust to changes in the environment. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/a010ed6d-efb0-456d-bd4a-dfc6da23e7aa@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}Bitterblue Smith
fw.c contains a function for loading the firmware. led.c contains a function for controlling the LED. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/a52b8907-267c-4811-90ca-5eb852a2aa09@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/rf.{c,h}Bitterblue Smith
These contain one RF configuration function and some functions related to dual MAC operation. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/36258d72-11fd-4f70-84c6-782972f706ed@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/trx.{c,h}Bitterblue Smith
These contain routines related to sending frames to the chip. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/bd2c24a0-a1fe-493a-8079-d83fda81a0d5@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/phy.{c,h}Bitterblue Smith
These contain mostly the calibration and channel switching routines for RTL8192DU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/299a5ab7-46bf-410b-bbeb-e252eeeeb34c@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/hw.{c,h}Bitterblue Smith
These contain mostly hardware init/deinit routines for RTL8192DU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/282afe18-f37d-45f7-9275-68c39d1fde09@gmail.com
2024-05-30wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DUBitterblue Smith
These are needed for the dual MAC version of RTL8192DU. The two mutexes are used to avoid concurrent access to the hardware from the two USB interfaces. The two arrays are filled by one interface during LC calibration and accessed by the other interface during channel switching. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/d1bf581b-de41-4d09-bf56-768c2fc29dd3@gmail.com
2024-05-30wifi: rtlwifi: Add rtl8192du/table.{c,h}Bitterblue Smith
These contain the MAC, BB, RF, and AGC initialisation tables for RTL8192DU. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/5ea548b9-5ec6-4358-aa5d-94071f2341cb@gmail.com
2024-05-30wifi: rtlwifi: rtl8192d: Use "rtl92d" prefixBitterblue Smith
Some functions moved from rtl8192de still use the "rtl92de" prefix. Rename them. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/abe3624d-f986-4a24-966c-67defa962e3f@gmail.com
2024-05-29wifi: iwlwifi: mvm: don't read past the mfuart notifcationEmmanuel Grumbach
In case the firmware sends a notification that claims it has more data than it has, we will read past that was allocated for the notification. Remove the print of the buffer, we won't see it by default. If needed, we can see the content with tracing. This was reported by KFENCE. Fixes: bdccdb854f2f ("iwlwifi: mvm: support MFUART dump in case of MFUART assert") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.ba82a01a559e.Ia91dd20f5e1ca1ad380b95e68aebf2794f553d9b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: Fix scan abort handling with HW rfkillIlan Peer
When HW rfkill is toggled to disable the RF, the flow to stop scan is called. When trying to send the command to abort the scan, since HW rfkill is toggled, the command is not sent due to rfkill being asserted, and -ERFKILL is returned from iwl_trans_send_cmd(), but this is silently ignored in iwl_mvm_send_cmd() and thus the scan abort flow continues to wait for scan complete notification and fails. Since it fails, the UID to type mapping is not cleared, and thus a warning is later fired when trying to stop the interface. To fix this, modify the UMAC scan abort flow to force sending the scan abort command even when in rfkill, so stop the FW from accessing the radio etc. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.8cbe2f8c1a97.Iffe235c12a919dafec88eef399eb1f7bae2c5bdb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: check n_ssids before accessing the ssidsMiri Korenblit
In some versions of cfg80211, the ssids poinet might be a valid one even though n_ssids is 0. Accessing the pointer in this case will cuase an out-of-bound access. Fix this by checking n_ssids first. Fixes: c1a7515393e4 ("iwlwifi: mvm: add adaptive dwell support") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240513132416.6e4d1762bf0d.I5a0e6cc8f02050a766db704d15594c61fe583d45@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: properly set 6 GHz channel direct probe optionAyala Beker
Ensure that the 6 GHz channel is configured with a valid direct BSSID, avoiding any invalid or multicast BSSID addresses. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.91a631a0fe60.I2ea2616af9b8a2eaf959b156c69cf65a2f1204d4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: handle BA session teardown in RF-killJohannes Berg
When entering RF-kill, mac80211 tears down BA sessions, but due to RF-kill the commands aren't sent to the device. As a result, there can be frames pending on the reorder buffer or perhaps even received while doing so, leading to warnings. Avoid the warnings by doing the BA session teardown normally even in RF-kill, which also requires queue sync. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.0762cd80fb3d.I43c5877f3b546159b2db4f36d6d956b333c41cf0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: Handle BIGTK cipher in kek_kck cmdYedidya Benshimol
The BIGTK cipher field was added to the kek_kck_material_cmd but wasn't assigned. Fix that by differentiating between the IGTK/BIGTK keys and assign the ciphers fields accordingly. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.7fd0b22b7267.Ie9b581652b74bd7806980364d59e1b2e78e682c0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: remove stale STA link data during restartBenjamin Berg
If pre-recovery mac80211 tried to disable a link but this disablement failed, then there might be a mismatch between mac80211 assuming the link has been disabled and the driver still having the data around. During recover itself, that is not a problem, but should the link be activated again at a later point, iwlwifi will refuse the activation as it detects the inconsistent state. Solve this corner-case by iterating the station in the restart cleanup handler. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.d2fd60338055.I840d4fdce5fd49fe69896d928b071067e3730259@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: dbg_ini: move iwl_dbg_tlv_free outside of debugfs ifdefShahar S Matityahu
The driver should call iwl_dbg_tlv_free even if debugfs is not defined since ini mode does not depend on debugfs ifdef. Fixes: 68f6f492c4fa ("iwlwifi: trans: support loading ini TLVs from external file") Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.c8e3723f55b0.I5e805732b0be31ee6b83c642ec652a34e974ff10@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: set properly mac headerMordechay Goodstein
In the driver we only use skb_put* for adding data to the skb, hence data never moves and skb_reset_mac_haeder would set mac_header to the first time data was added and not to mac80211 header, fix this my using the actual len of bytes added for setting the mac header. Fixes: 3f7a9d577d47 ("wifi: iwlwifi: mvm: simplify by using SKB MAC header pointer") Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.12f2de2909c3.I72a819b96f2fe55bde192a8fd31a4b96c301aa73@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64Johannes Berg
We don't actually support >64 even for HE devices, so revert back to 64. This fixes an issue where the session is refused because the queue is configured differently from the actual session later. Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.52f7b4cf83aa.If47e43adddf7fe250ed7f5571fbb35d8221c7c47@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: d3: fix WoWLAN command version lookupYedidya Benshimol
After moving from commands to notificaitons in the d3 resume flow, removing the WOWLAN_GET_STATUSES and REPLY_OFFLOADS_QUERY_CMD causes the return of the default value when looking up their version. Returning zero here results in the driver sending the not supported NON_QOS_TX_COUNTER_CMD. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.8cabfd580614.If3a0db9851f56041f8f5360959354abd5379224a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: fix a crash on 7265Emmanuel Grumbach
Since IWL_FW_CMD_VER_UNKNOWN = 99, then my change to consider cmd_ver >= 7 instead of cmd_ver = 7 included also firmwares that don't advertise the command version at all. This made us send a command with a bad size and because of that, the firmware hit a BAD_COMMAND immediately after handling the REDUCE_TX_POWER_CMD command. Fixes: 8f892e225f41 ("wifi: iwlwifi: mvm: support iwl_dev_tx_power_cmd_v8") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512072733.eb20ff5050d3.Ie4fc6f5496cd296fd6ff20d15e98676f28a3cccd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: always set the TWT IE offsetShaul Triebitz
In beacon template version 14, make sure to always set the TWT IE offset before sending the beacon template command, also in the debugfs inject_beacon_ie path. If the TWT IE does not exist, the offset will be set to zero. Fixes: bf0212fd8faa ("wifi: iwlwifi: mvm: add beacon template version 14") Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240512152312.eb27175c345a.If30ef24aba10fe47fd42a7a9703eb8903035e294@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: don't initialize csa_work twiceMiri Korenblit
The initialization of this worker moved to iwl_mvm_mac_init_mvmvif but we removed only from the pre-MLD version of the add_interface callback. Remove it also from the MLD version. Fixes: 0bcc2155983e ("wifi: iwlwifi: mvm: init vif works only once") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240512152312.4f15b41604f0.Iec912158e5a706175531d3736d77d25adf02fba4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: move Bz and Gl iwl_dev_info entriesMiri Korenblit
The iwl_dev_info entries for these devices were incorrectly positioned within the array, out of chronological order. Move them arround. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://msgid.link/20240527190228.a75e9a1eb86c.I003980f8ca60a96019657e396e848a07df6b92a4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: move amsdu_size parsing to iwlwifiMiri Korenblit
The code that is parsing the amsdu_size module parameter and mapping it to the corresponding Rx buffer size is common to all opmodes. Move it into a function in iwlwifi, as preparation to a new op mode we are working on. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240527190228.a3430d32923d.Iab3c22ef0df685f72f22dafc47021f0dc7bd6fa5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: remove redundant printsMiri Korenblit
Upon start, the different opmodes are currently printing: 1. HW rev, which is already print by iwlwifi 2. The HW name (e.g. "Intel(R) Wi-Fi 7 BE201 320MHz") cleanup things such as the hw rev won't be printed again, the HW name will be printed by iwlwifi instead of each opmode. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://msgid.link/20240527190228.5c589c7abed0.I3590c4ee0ee99d1b207852c32d25d326afb327dd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: fix a wrong commentMiri Korenblit
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240527190228.2105ffcf747d.Ic838959b812b6cb4cbb856e8c0bcaad2f46ac71b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: declare band variable in the scopeMiri Korenblit
band is not used outside of the for loop, declare it inside it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240527190228.b634d184980a.I9d9e71125f9a77ba4f9a33a7a2ff1e8e78e17767@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: show full firmware ID in debugfsJohannes Berg
The firmware prefix is unused today, but it might still be useful to have some information. Since the prefix will get the intel/ directory in some cases, replace the prefix by the full FW id which has all the information. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240527190228.527a1c72996d.If7588b854149d51605031fc9a70a650534351ef4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-29wifi: iwlwifi: mvm: add debug data for MPDU countingMiri Korenblit
It is hard to debug issues of EMLSR entry/exit due to low throughput. Add debug data. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240527190228.77ef3c2654dc.I1796a3995da2a49dd5102d33766af1ad416dd60b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2025-06-05 15:32:13 +0000