Age | Commit message (Collapse) | Author |
|
Pass in struct ieee80211_bss_conf in order to use link specific data.
Link: https://patch.msgid.link/20250102163508.52945-17-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Pass in struct ieee80211_bss_conf.
Link: https://patch.msgid.link/20250102163508.52945-16-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add extra arguments for struct ieee80211_bss_conf and mt76_vif_link.
Link: https://patch.msgid.link/20250102163508.52945-15-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Preparation for MLO support.
Link: https://patch.msgid.link/20250102163508.52945-14-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Preparation for supporting multiple radios on a single wiphy
Link: https://patch.msgid.link/20250102163508.52945-13-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This allows a driver using the generic channel context functions to
temporarily switch to another channel for off-channel rx/tx.
Link: https://patch.msgid.link/20250102163508.52945-12-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
When scanning on a phy/vif combination that does not have an active link,
create a temporary link in order to ensure that we have a valid wcid.
Link: https://patch.msgid.link/20250102163508.52945-11-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Look up the phy for each scheduled txq. Only run one scheduling loop per hw.
Link: https://patch.msgid.link/20250102163508.52945-10-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Iterate over all phys if multi-radio is supported by the driver
Link: https://patch.msgid.link/20250102163508.52945-9-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Explicitly check wcid->phy_idx instead. Reduces allocated data size.
Link: https://patch.msgid.link/20250102163508.52945-8-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This adds an implementation for the chanctx functions, which can be used
by multi-channel capable drivers. Preparation for adding MLO support.
Link: https://patch.msgid.link/20250102163508.52945-7-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Reduces code duplication and ensures that the phy index is always set.
Link: https://patch.msgid.link/20250102163508.52945-6-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Preparation for MLO support.
Link: https://patch.msgid.link/20250102163508.52945-5-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Preparation for splitting link data from vif data for MLO support.
Link: https://patch.msgid.link/20250102163508.52945-4-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Preparation to use it for private bss link data instead of the full vif
on MLO capable devices.
Link: https://patch.msgid.link/20250102163508.52945-3-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Preparation for supporting a single hw with multiple radios
Link: https://patch.msgid.link/20250102163508.52945-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Preparation for supporting multiple radios on a single wiphy on devices
where firmware does not support actual hardware scanning.
This is also a prerequisite for full MLO support
Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Co-developed-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250102163508.52945-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fixes linked list management issues during restart, where sta entries
can be recreated and reinitialized while still in the poll list, triggering
kernel warnings.
Link: https://patch.msgid.link/20241230194202.95065-14-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Allows adding stations before assoc, though they are not passed to the
firmware yet at that point.
Link: https://patch.msgid.link/20241230194202.95065-13-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Reset per-phy mac address slot mask in order to avoid leaking entries.
Fixes: 8a55712d124f ("wifi: mt76: mt7915: enable full system reset support")
Link: https://patch.msgid.link/20241230194202.95065-12-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
It seems that the firmware checks the register used for detecting matching
PCIe links in order to figure out if a secondary PCIe link is enabled.
Write the register again just before starting the firmware on hw reset,
in order to fix an issue that left the second band unusable after restart.
Fixes: 9093cfff72e3 ("mt76: mt7915: add support for using a secondary PCIe link for gen1")
Link: https://patch.msgid.link/20241230194202.95065-11-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Avoid issuing MCU calls during a hardware restart
Link: https://patch.msgid.link/20241230194202.95065-10-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
When a client is roaming to a different AP interface, a duplicate wtbl entry
can be created. This can lead to lost packets or aggregation issues until
the old entry expires.
In order to fix this issue, delete any conflicting entries from WTBL
whenever a station is authorized.
Link: https://patch.msgid.link/20241230194202.95065-9-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Avoids sending packets too early
Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Link: https://patch.msgid.link/20241230194202.95065-8-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This allows faster recovery from firmware issues
Link: https://patch.msgid.link/20241230194202.95065-7-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The need to retry a command is really uncommon. Reduce the retries to 1 to
speed up recovery from firmware issues.
Link: https://patch.msgid.link/20241230194202.95065-6-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix rx filter setting to prevent dropping NDPA frames. Without this
change, bfee functionality may behave abnormally.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Link: https://patch.msgid.link/20241230194202.95065-5-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Use the default firmware values
Link: https://patch.msgid.link/20241230194202.95065-4-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
It should only be set to 20 for long slot time on 2.4 GHz
Link: https://patch.msgid.link/20241230194202.95065-3-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
It is unused
Link: https://patch.msgid.link/20241230194202.95065-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
It is only used in mt76_connac2_mac_tx_rate_val, inline it there.
Link: https://patch.msgid.link/20241230194202.95065-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add VID/PID 35bc/0107 for recently released TP-Link TXE50UH USB WiFi adapter.
Tested-by: Shang Chieh Tseng <shangchieh.tseng@tsengsy.com>
Signed-off-by: Nick Morrow <usbwifi2024@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/e797f105-9ca8-41e9-96de-7d25dec09943@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last, which is beneficial
to cultivate a high-quality code.[2]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Zhang Kunbo <zhangkunbo@huawei.com>
Link: https://patch.msgid.link/20241218074552.3271542-1-zhangkunbo@huawei.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add mac80211 rfkill_poll ops to monitor hardware rfkill state
and state change will be updated.
Signed-off-by: Allan Wang <allan.wang@mediatek.com>
Link: https://patch.msgid.link/20241209070922.28106-1-allan.wang@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add CSA (Channel Switch Announcement) related implementation
in collaboration with mac80211 to deal with dynamic channel
switching.
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20241107061440.6545-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
To optimize the scan time of mt7925, remove the dwell time
setting for the scan command and let it be controlled by
the firmware as mt7921.
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20241106013221.18101-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
In dma init or reset scene, full buffer is needed for all rx rings. Since
this is very time consuming, split the function to perform initial
allocation without holding the spinlock. This avoids causing excessive
scheduler latency.
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Reviewed-by: Deren Wu <deren.wu@mediatek.com>
Link: https://patch.msgid.link/57c68a7ce1dd9022fa5e06af2c53d6313f30ec83.1731069062.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Properly retrieve the response for commands with events. Ensure accurate
handling of event-driven commands.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-17-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Clean up MLO settings after disconnection.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-16-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Update mt7925_mcu_uni_[tx,rx]_ba for MLO support in firmware.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-15-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Initialize secondary link PM state.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-14-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Update the power-saving flow for secondary links.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-13-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Update mt7925_unassign_vif_chanctx to support per-link BSS.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-12-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Update mt792x_rx_get_wcid to support per-link STA.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-11-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Update mt7925_mcu_sta_update for broadcast (BC) in the ASSOC state.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-10-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Enhance mt7925_mac_link_sta_add to support MLO.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-9-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
In mt7925_mac_link_bss_add(), the mt76_connac_mcu_uni_add_dev() function
must be executed only after all parameters have been properly initialized.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-8-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix CNM command timeout issue when only a single active link is available
during MLO connection to fix the following kernel log error.
[ 741.931030] wlan0: [link 1] local address be:90:e0:22:c4:22, AP link address 08:0c:43:7a:19:2a
[ 741.931042] wlan0: [link 1] determined AP 08:0c:43:7a:19:2a to be EHT
[ 741.931052] wlan0: [link 1] connecting with EHT mode, max bandwidth 160 MHz
[ 741.931071] wlan0: WMM AC=0 acm=0 aifs=2 cWmin=3 cWmax=7 txop=47 uapsd=0, downgraded=0
[ 741.931076] wlan0: WMM AC=1 acm=0 aifs=2 cWmin=7 cWmax=15 txop=94 uapsd=0, downgraded=0
[ 741.931080] wlan0: WMM AC=2 acm=0 aifs=3 cWmin=15 cWmax=1023 txop=0 uapsd=0, downgraded=0
[ 741.931085] wlan0: WMM AC=3 acm=0 aifs=7 cWmin=15 cWmax=1023 txop=0 uapsd=0, downgraded=0
[ 741.931095] wlan0: moving STA 22:0c:43:7a:19:2a to state 3
[ 749.090928] mt7925e 0000:2b:00.0: Message 00020002 (seq 15) timeout
[ 752.162972] mt7925e 0000:2b:00.0: Message 00020003 (seq 1) timeout
[ 755.234975] mt7925e 0000:2b:00.0: Message 00020002 (seq 2) timeout
[ 758.306971] mt7925e 0000:2b:00.0: Message 00020004 (seq 3) timeout
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-7-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix incorrect parameters for the related channel information command.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-6-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix incorrect WCID phy_idx assignment.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: allan.wang <allan.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20241211011926.5002-5-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|