summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2012-02-17iwlwifi: SRAM size moves from hw_params to cfgEmmanuel Grumbach
This will allow to set the hw_params after we fetch the uCode. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: save ucode capabilities in iwl_fwDon Fry
The capabilities parsed from the ucode file are never saved. Save them in the iwl_fw structure. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: changes args to iwl_nic for firmware operationsDon Fry
Remove the references to iwl_priv from the firmware request and parsing routines. They are generic to the nic. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: the transport knows its stateEmmanuel Grumbach
This allows to handle races such as Tx packets on their way to be sent although the transport has been stopped already. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: move event and err pointers to iwl_nicDon Fry
Move the ucode offset pointers to the iwl_nic as they are nic related. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: document the transport layerEmmanuel Grumbach
Fix a few typos in the existing comments too. Enforce the comments with might_sleep. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: send testmode hcmd reply with rx headerAmit Beka
When a host command is sent through testmode, the whole reply (including rx header) is returned to the user, and not only the payload of the rx. Before this commit the length was buggy - the reply contained 4 bytes after the end of the payload. Signed-off-by: Amit Beka <amit.beka@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: fixes to testmode indirect accessAmit Beka
Fixed casting of buffer addressing, and added size to the read method, like in __iwl_read_prph. Signed-off-by: Amit Beka <amit.beka@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: use enhance_sensitivity from iwl_fwEmmanuel Grumbach
Remove another dependency between the nic layer and the iwl_priv struct. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: iwl_set_hw_params returns always 0Emmanuel Grumbach
Remove the return value. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: kill iwl_down and s/__iwl_down/iwl_downEmmanuel Grumbach
iwl_down was just a wrapper around __iwl_down which was called from one place only. Replace it to direct call to iwl_down. Add lockdep warning in iwl_down to ensure it was called with the mutex held. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: change args to ucode routinesDon Fry
Change the prameters to the ucode (de)allocate routines to iwl_nic as they are not transport operations. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: Move ucode pointers to iwl_fwDon Fry
The ucode image is a ucode related thing not a transport one. Move them. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: move firmware_loading_complete to iwl_nicDon Fry
Move firmware_loading_complete from iwl_priv to iwl_nic and rename it to more accurately reflect what it does. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: move firmware_name to iwl_nicDon Fry
Delete firmware_name from iwl_priv and use iwl_nic instead. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: move fw_index from iwl_priv to iwl_nicDon Fry
Delete fw_index from iwl_priv and use iwl_nic instead. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: move ucode_ver to iwl_nicDon Fry
Delete ucode_ver from iwl_priv and use iwl_nic instead. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: create iwl_nic structureDon Fry
Create iwl_nic structure and link it together. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: give PCIe its own lockJohannes Berg
Instead of using a global lock, the PCIe transport can use an own lock for its IRQ. This will make it possible to not disable IRQs for the shared lock. The lock is currently used throughout the code but this can be improved even further by splitting up the locking for the queues. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: move workqueue to privJohannes Berg
In order to separate the different parts of the driver better, we are reducing the shared data. This moves the workqueue to "priv", and removes it from the transport. To do this, simply use schedule_work() in the transport. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: trace debug messagesJohannes Berg
Make iwlwifi record all debug messages into tracing, even if debug_level is not enabled. Due to the lack of APIs, the debug messages are now recorded up to a max length of 100, the only one above that is the RXON which is not needed if you trace the commands as well as it only dumps the command contents. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi W Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: added reply data to testmode HCMD sendAmit Beka
The testmode command for host command send now replies with a nl80211 message and the response it recieved from the device. This does not change the API directly, but adds a reply to the testmode call. Signed-off-by: Amit Beka <amit.beka@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: testmode new indirect RW APIAmit Beka
Replaced the old SRAM and periphery indirect access functions with a unified indirect memory access functions. These include new IWL_TM_CMDs for buffer read/write/dump which replace the SRAM read/dump commands, but the API for IWL_TM_CMD_INDIRECT_REG read/write will now not be supported (returns error). This also handles writing to periphery registers in 1-3 bytes. Requires the corresponding patch in the library for the API change. Signed-off-by: Amit Beka <amit.beka@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-17iwlwifi: log as error when error detectedWey-Yi Guy
A lot of error conditions in testmode log as IWL_DEBUG_INFO which is not logged by default. Change it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2012-02-15Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/debugfs_sta.c net/mac80211/sta_info.h
2012-02-15ath9k: stop on rates with idx -1 in ath9k rate control's .tx_statusPavel Roskin
Rate control algorithms are supposed to stop processing when they encounter a rate with the index -1. Checking for rate->count not being zero is not enough. Allowing a rate with negative index leads to memory corruption in ath_debug_stat_rc(). One consequence of the bug is discussed at https://bugzilla.redhat.com/show_bug.cgi?id=768639 Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-15mwifiex: clear previous security setting during associationAmitkumar Karwar
Driver maintains different flags for WEP, WPA, WPA2 security modes. Appropriate flag is set using security information provided in connect request. mwifiex_is_network_compatible() routine uses them to check if driver's setting is compatible with AP. Association is aborted if the routine fails. For some corner cases, it is observed that association is failed even for valid security information based on association history. This patch fixes the problem by clearing previous security setting during each association. We should set WEP key provided in connect request as default tx key. This missing change is also added here. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-09rtlwifi: Modify rtl_pci_init to return 0 on successSimon Graham
Fixes problem where caller would think routine succeeded when it failed leading to divide by zero panic. Signed-off-by: Simon Graham <simon.graham@virtualcomputer.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-09rtlwifi: Modify rtl_pci_init to return 0 on successJohn W. Linville
Fixes problem where caller would think routine succeeded when it failed leading to divide by zero panic. (This also reverts an earlier attempt, commit 42bc0c97 "rtlwifi: Return correct failure code on error". -- JWL) Signed-off-by: Simon Graham <simon.graham@virtualcomputer.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rtlwifi: Return correct failure code on errorSimon Graham
Callers of rtl_pci_init expect zero to be returned on error. Returning the error code leads to, amongst other things, divide by zero panics attempting to use the ring size that is set to zero. Signed-off-by: Simon Graham <simon.graham@virtualcomputer.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rtlwifi: Handle previous allocation failures when freeing device memorySimon Graham
Handle previous allocation failures when freeing device memory Signed-off-by: Simon Graham <simon.graham@virtualcomputer.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Correctly set txmixer_gain in RT3572 channel switching.Gertjan van Wingerde
Align with the v2.5.0.0 Ralink RT3572 driver. Save the EEPROM txmixer_gain values inside the rt2800 driver data structure and use it throughout the code. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Fix RT3572 channel switch RFCSR 7 programming.Gertjan van Wingerde
Align with the v2.5.0.0 Ralink RT3572 driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Align RT3572 channel switch RFCSR 1 programming with Ralink driver.Gertjan van Wingerde
Align with the v2.5.0.0 Ralink RT3572 driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Fix RFCSR 12 & 13 programming on RT3572 channel switching.Gertjan van Wingerde
Align with v2.5.0.0 Ralink RT3572 driver for 2.4GHz band channel switch. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Use saved BBP 25 and 26 values when configuring channel on RT3572.Gertjan van Wingerde
This brings the rt2800 channel switching code for RT3572 closer to the v2.5.0.0 Ralink RT3572 driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Update comment on freq_offset field in struct rt2x00_dev.Gertjan van Wingerde
The comment states that the field is only used for rt61pci and rt73usb. However, it is now used by rt2800pci and rt2800usb as well, so the comment is not correct anymore. Update the comment to not state any low-level drivers anymore. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Use struct rt2x00_dev driver data in rt2800{pci,usb}.Gertjan van Wingerde
Start using the struct rt2x00_dev driver data in rt2800 for the calibration data. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-08rt2x00: Introduce concept of driver data in struct rt2x00_dev.Gertjan van Wingerde
We are getting more and more fields in struct rt2x00_dev that are specific to one or two of the low-level drivers. Instead of putting these fields inside the main structure and thus clobbering all low-level drivers with these fields, introduce the concept of driver data inside struct rt2x00_dev, whose size is indicated by the low-level driver and which can be populated by the low-level driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-07zd1211rw: firmware needs duration_id set to zero for non-pspoll framesTomas Vanek
Some devices (iwl5100) cannot connect to zd1211rw based AP. It appears that zd1211 firmware messes up duration_id field if it is not set to zero by driver. Sniffing traffic shows that zd1211 is transmitting frames with duration_id bits 14 and 15 set and other bits appearing random. Setting duration_id at driver to zero results zd1211 outputting sane duration_id. This means that firmware is setting correct values itself and expects duration_id to be zero in first place. Looking at vendor driver shows that only PSPoll frames have duration_id set by driver, for other frames duration_id left zero. Original bug-report and attached patch at: http://sourceforge.net/mailarchive/message.php?msg_id=28759111 Reported-by: Tomas Vanek <Tomas.Vanek@fbl.cz> [modified original patch from bug-report, added check for pspoll frame] Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: remove set_hw_params callbackStanislaw Gruszka
We do not need that callback, settings parameters can be done locally. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: remove struct il_tx_infoStanislaw Gruszka
It's just wrapper to sk_buff pointers ... Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: merge il_base_params into il_cfgStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move ops out of configStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx structureStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: remove il_setup_interface()Stanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->is_activeStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->ac_to_queueStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: get rid of ctx->ac_to_fifoStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-02-06iwlegacy: move ht out of ctx structureStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-05-22 06:33:20 +0000