| Age | Commit message (Collapse) | Author |
|---|
|
Runtime power management support breaks Intel LTE modem where dmesg dump
showes timeout errors:
```
[ 72.027442] iosm 0000:01:00.0: msg timeout
[ 72.531638] iosm 0000:01:00.0: msg timeout
[ 73.035414] iosm 0000:01:00.0: msg timeout
[ 73.540359] iosm 0000:01:00.0: msg timeout
```
Furthermore, when shutting down with `poweroff` and modem attached, the
system rebooted instead of powering down as expected. The modem works
again only after power cycling.
Revert runtime power management support for IOSM driver as introduced by
commit e4f5073d53be6c ("net: wwan: iosm: enable runtime pm support for
7560").
Fixes: e4f5073d53be ("net: wwan: iosm: enable runtime pm support for 7560")
Reported-by: Martin <mwolf@adiumentum.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217996
Link: https://lore.kernel.org/r/267abf02-4b60-4a2e-92cd-709e3da6f7d3@gmail.com/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds runtime pm support for 7560.
As part of probe procedure auto suspend is enabled and auto suspend
delay is set to 5000 ms for runtime pm use. Later auto flag is set
to power manage the device at run time.
On successful communication establishment between host and device the
device usage counter is dropped and request to put the device into
sleep state (suspend).
In TX path, the device usage counter is raised and device is moved out
of sleep(resume) for data transmission. In RX path, if the device has
some data to be sent it request host platform to change the power state
by giving PCI PME message.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Below members are unused.
- td_tag member defined in struct ipc_pipe.
- adb_finish_timer & params defined in struct iosm_mux.
Remove it to avoid unexpected usage.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/92ee483d79dfc871ed7408da8fec60b395ff3a9c.1683649868.git.m.chetan.kumar@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ipc_time_unit enum is defined but not used.
Remove it to avoid unexpected usage.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/8295a6138f13c686590ee4021384ee992f717408.1683649868.git.m.chetan.kumar@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Post debugfs use call wwan_put_debugfs_dir()to drop
debugfs dev reference.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch enables Intel M.2 7360 WWAN card support on
IOSM Driver.
Control path implementation is a reuse whereas data path
implementation it uses a different protocol called as MUX
Aggregation. The major portion of this patch covers the MUX
Aggregation protocol implementation used for IP traffic
communication.
For M.2 7360 WWAN card, driver exposes 2 wwan AT ports for
control communication. The user space application or the
modem manager to use wwan AT port for data path establishment.
During probe, driver reads the mux protocol device capability
register to know the mux protocol version supported by device.
Base on which the right mux protocol is initialized for data
path communication.
An overview of an Aggregation Protocol
1> An IP packet is encapsulated with 16 octet padding header
to form a Datagram & the start offset of the Datagram is
indexed into Datagram Header (DH).
2> Multiple such Datagrams are composed & the start offset of
each DH is indexed into Datagram Table Header (DTH).
3> The Datagram Table (DT) is IP session specific & table_length
item in DTH holds the number of composed datagram pertaining
to that particular IP session.
4> And finally the offset of first DTH is indexed into DBH (Datagram
Block Header).
So in TX/RX flow Datagram Block (Datagram Block Header + Payload)is
exchanged between driver & device.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ev_cdev_write_pending flag is preventing a TX message post for
AT port while MBIM transfer is ongoing.
Removed the unnecessary check around control port TX transfer.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Devlink initialization flow was overwriting the IP traffic
channel configuration. This was causing wwan0 network interface
to be unusable after fw flash.
When device boots to fully functional mode restore the IP channel
configuration.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Debugfs interface is optional for the regular modem use. Some distros
and users will want to disable this feature for security or kernel
size reasons. So add a configuration option that allows to completely
disable the debugfs interface of the WWAN devices.
A primary considered use case for this option was embedded firmwares.
For example, in OpenWrt, you can not completely disable debugfs, as a
lot of wireless stuff can only be configured and monitored with the
debugfs knobs. At the same time, reducing the size of a kernel and
modules is an essential task in the world of embedded software.
Disabling the WWAN and IOSM debugfs interfaces allows us to save 50K
(x86-64 build) of space for module storage. Not much, but already
considerable when you only have 16MB of storage.
So it is hard to just disable whole debugfs. Users need some fine
grained set of options to control which debugfs interface is important
and should be available and which is not.
The new configuration symbol is enabled by default and is hidden under
the EXPERT option. So a regular user would not be bothered by another
one configuration question. While an embedded distro maintainer will be
able to a little more reduce the final image size.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The modem traces collection is a device (and so driver) specific option.
Therefore, move the related debugfs files into a driver-specific
subdirectory under the common per WWAN device directory.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch brings in support for device trace collection.
It implements relayfs interface for pushing device trace
from kernel space to user space.
Driver gets the debugfs base directory associated to WWAN
Device and creates trace_control and trace debugfs for
device tracing. Both trace_control & trace debugfs are
created under /sys/kernel/debug/wwan/wwan0/.
In order to collect device trace on trace0 interface, user
need to write 1 to trace_ctl interface.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implements transport layer protocol for fw flashing/coredump
collection.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The devlink parameters are not the right mechanism to pass
extra parameters to device flashing. The params added are
also undocumented.
This reverts commit 13bb8429ca98 ("net: wwan: iosm: firmware
flashing and coredump collection").
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Removed "stdbool.h" inclusion in iosm_ipc_imem.h
Fixes: 13bb8429ca98 ("net: wwan: iosm: firmware flashing and coredump collection")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch brings-in support for M.2 7560 Device firmware flashing &
coredump collection using devlink.
- Driver Registers with Devlink framework.
- Register devlink params callback for configuring device params
required in flashing or coredump flow.
- Implements devlink ops flash_update callback that programs modem
firmware.
- Creates region & snapshot required for device coredump log collection.
On early detection of device in boot rom stage. Driver registers with
Devlink framework and establish transport channel for PSI (Primary Signed
Image) injection. Once PSI is injected to device, the device execution
stage details are read to determine whether device is in flash or
exception mode. The collected information is reported to devlink user
space application & based on this informationi, application proceeds with
either modem firmware flashing or coredump collection.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Delete/fixup few includes in anticipation of global -isystem compile
option removal.
Note: crypto/aegis128-neon-inner.c keeps <stddef.h> due to redefinition
of uintptr_t error (one definition comes from <stddef.h>, another from
<linux/types.h>).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
1) Initializes shared memory for host-device communication.
2) Allocate resources required for control & data operations.
3) Transfers the Device IRQ to IPC execution thread.
4) Defines the timer cbs for async events.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
