summaryrefslogtreecommitdiff
path: root/drivers/net/wwan
AgeCommit message (Collapse)Author
2022-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in overtime fixes, no conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-22net: wwan: qcom_bam_dmux: fix wrong pointer passed to IS_ERR()Yang Yingliang
It should check dmux->tx after calling dma_request_chan(). Fixes: 21a0ffd9b38c ("net: wwan: Add Qualcomm BAM-DMUX WWAN network driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20220319032450.3288224-1-yangyingliang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-02-14net: wwan: iosm: drop debugfs dev referenceM Chetan Kumar
Post debugfs use call wwan_put_debugfs_dir()to drop debugfs dev reference. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-14net: wwan: debugfs obtained dev reference not droppedM Chetan Kumar
WWAN driver call's wwan_get_debugfs_dir() to obtain WWAN debugfs dir entry. As part of this procedure it returns a reference to a found device. Since there is no debugfs interface available at WWAN subsystem, it is not possible to drop dev reference post debugfs use. This leads to side effects like post wwan driver load and reload the wwan instance gets increment from wwanX to wwanX+1. A new debugfs interface is added in wwan subsystem so that wwan driver can drop the obtained dev reference post debugfs use. void wwan_put_debugfs_dir(struct dentry *dir) Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-13net: wwan: iosm: Enable M.2 7360 WWAN card supportM Chetan Kumar
This patch enables Intel M.2 7360 WWAN card support on IOSM Driver. Control path implementation is a reuse whereas data path implementation it uses a different protocol called as MUX Aggregation. The major portion of this patch covers the MUX Aggregation protocol implementation used for IP traffic communication. For M.2 7360 WWAN card, driver exposes 2 wwan AT ports for control communication. The user space application or the modem manager to use wwan AT port for data path establishment. During probe, driver reads the mux protocol device capability register to know the mux protocol version supported by device. Base on which the right mux protocol is initialized for data path communication. An overview of an Aggregation Protocol 1> An IP packet is encapsulated with 16 octet padding header to form a Datagram & the start offset of the Datagram is indexed into Datagram Header (DH). 2> Multiple such Datagrams are composed & the start offset of each DH is indexed into Datagram Table Header (DTH). 3> The Datagram Table (DT) is IP session specific & table_length item in DTH holds the number of composed datagram pertaining to that particular IP session. 4> And finally the offset of first DTH is indexed into DBH (Datagram Block Header). So in TX/RX flow Datagram Block (Datagram Block Header + Payload)is exchanged between driver & device. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-15net: wwan: Fix MRU mismatch issue which may lead to data connection lostSlark Xiao
In pci_generic.c there is a 'mru_default' in struct mhi_pci_dev_info. This value shall be used for whole mhi if it's given a value for a specific product. But in function mhi_net_rx_refill_work(), it's still using hard code value MHI_DEFAULT_MRU. 'mru_default' shall have higher priority than MHI_DEFAULT_MRU. And after checking, this change could help fix a data connection lost issue. Fixes: 5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU") Signed-off-by: Shujun Wang <wsj20369@163.com> Signed-off-by: Slark Xiao <slark_xiao@163.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04Revert "net: wwan: iosm: Keep device at D0 for s2idle case"M Chetan Kumar
Depending on BIOS configuration IOSM driver exchanges protocol required for putting device into D3L2 or D3L1.2. ipc_pcie_suspend_s2idle() is implemented to put device to D3L1.2. This patch forces PCI core know this device should stay at D0. - pci_save_state()is expensive since it does a lot of slow PCI config reads. The reported issue is not observed on x86 platform. The supurios wake on AMD platform needs to be futher debugged with orignal patch submitter [1]. Also the impact of adding pci_save_state() needs to be assessed by testing it on other platforms. This reverts commit f4dd5174e273("net: wwan: iosm: Keep device at D0 for s2idle case"). [1] https://lore.kernel.org/all/20211224081914.345292-2-kai.heng.feng@canonical.com/ Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Link: https://lore.kernel.org/r/20220104150213.1894-1-m.chetan.kumar@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-27net: wwan: iosm: Keep device at D0 for s2idle caseKai-Heng Feng
We are seeing spurious wakeup caused by Intel 7560 WWAN on AMD laptops. This prevent those laptops to stay in s2idle state. >From what I can understand, the intention of ipc_pcie_suspend() is to put the device to D3cold, and ipc_pcie_suspend_s2idle() is to keep the device at D0. However, the device can still be put to D3hot/D3cold by PCI core. So explicitly let PCI core know this device should stay at D0, to solve the spurious wakeup. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-27net: wwan: iosm: Let PCI core handle PCI power transitionKai-Heng Feng
pci_pm_suspend_noirq() and pci_pm_resume_noirq() already handle power transition for system-wide suspend and resume, so it's not necessary to do it in the driver. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-10net: wwan: iosm: correct open parenthesis alignmentM Chetan Kumar
Fix checkpatch warning in iosm_ipc_mmio.c - Alignment should match open parenthesis Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-10net: wwan: iosm: removed unused function declM Chetan Kumar
ipc_wwan_tx_flowctrl() is declared in iosm_ipc_wwan.h but is not defined. Removed the dead code. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-10net: wwan: iosm: release data channel in case no active IP sessionM Chetan Kumar
If there is no active IP session (interface up & running) then release the data channel. Use nr_sessions variable to track current active IP sessions. If the count drops to 0, then send pipe close ctrl message to release the data channel. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-10net: wwan: iosm: set tx queue lenM Chetan Kumar
Set wwan net dev tx queue len to DEFAULT_TX_QUEUE_LEN. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-09net: wwan: iosm: fixes unable to send AT command during mbim txM Chetan Kumar
ev_cdev_write_pending flag is preventing a TX message post for AT port while MBIM transfer is ongoing. Removed the unnecessary check around control port TX transfer. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-09net: wwan: iosm: fixes net interface nonfunctional after fw flashM Chetan Kumar
Devlink initialization flow was overwriting the IP traffic channel configuration. This was causing wwan0 network interface to be unusable after fw flash. When device boots to fully functional mode restore the IP channel configuration. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-09net: wwan: iosm: fixes unnecessary doorbell sendM Chetan Kumar
In TX packet accumulation flow transport layer is giving a doorbell to device even though there is no pending control TX transfer that needs immediate attention. Introduced a new hpda_ctrl_pending variable to keep track of pending control TX transfer. If there is a pending control TX transfer which needs an immediate attention only then give a doorbell to device. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-08net: wwan: make debugfs optionalSergey Ryazanov
Debugfs interface is optional for the regular modem use. Some distros and users will want to disable this feature for security or kernel size reasons. So add a configuration option that allows to completely disable the debugfs interface of the WWAN devices. A primary considered use case for this option was embedded firmwares. For example, in OpenWrt, you can not completely disable debugfs, as a lot of wireless stuff can only be configured and monitored with the debugfs knobs. At the same time, reducing the size of a kernel and modules is an essential task in the world of embedded software. Disabling the WWAN and IOSM debugfs interfaces allows us to save 50K (x86-64 build) of space for module storage. Not much, but already considerable when you only have 16MB of storage. So it is hard to just disable whole debugfs. Users need some fine grained set of options to control which debugfs interface is important and should be available and which is not. The new configuration symbol is enabled by default and is hidden under the EXPERT option. So a regular user would not be bothered by another one configuration question. While an embedded distro maintainer will be able to a little more reduce the final image size. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Acked-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-08net: wwan: iosm: move debugfs knobs into a subdirSergey Ryazanov
The modem traces collection is a device (and so driver) specific option. Therefore, move the related debugfs files into a driver-specific subdirectory under the common per WWAN device directory. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Acked-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-08net: wwan: iosm: allow trace port be uninitializedSergey Ryazanov
Collecting modem firmware traces is optional for the regular modem use. There are not many reasons for aborting device initialization due to an inability to initialize the trace port and (or) its debugfs interface. So, demote the initialization failure erro message into a warning and do not break the initialization sequence in this case. Rework packet processing and deinitialization so that they do not crash in case of uninitialized trace port. This change is mainly a preparation for an upcoming configuration option introduction that will help disable driver debugfs functionality. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Acked-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-08net: wwan: iosm: consolidate trace port init codeSergey Ryazanov
Move the channel related structures initialization from ipc_imem_channel_init() to ipc_trace_init() and call it directly. On the one hand, this makes the trace port initialization symmetric to the deitialization, that is, it removes the additional wrapper. On the other hand, this change consolidates the trace port related code into a single source file, what facilitates an upcoming disabling of this functionality by a user choise. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Acked-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-06net: wwan: iosm: select CONFIG_RELAYArnd Bergmann
The iosm driver started using relayfs, but is missing the Kconfig logic to ensure it's built into the kernel: x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_create_buf_file_handler': iosm_ipc_trace.c:(.text+0x16): undefined reference to `relay_file_operations' x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_subbuf_start_handler': iosm_ipc_trace.c:(.text+0x31): undefined reference to `relay_buf_full' x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_ctrl_file_write': iosm_ipc_trace.c:(.text+0xd5): undefined reference to `relay_flush' x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_port_rx': Fixes: 00ef32565b9b ("net: wwan: iosm: device trace collection using relayfs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Link: https://lore.kernel.org/r/20211204174033.950528-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-29net: wwan: Add Qualcomm BAM-DMUX WWAN network driverStephan Gerhold
The BAM Data Multiplexer provides access to the network data channels of modems integrated into many older Qualcomm SoCs, e.g. Qualcomm MSM8916 or MSM8974. It is built using a simple protocol layer on top of a DMA engine (Qualcomm BAM) and bidirectional interrupts to coordinate power control. The modem announces a fixed set of channels by sending an OPEN command. The driver exports each channel as separate network interface so that a connection can be established via QMI from userspace. The network interface can work either in Ethernet or Raw-IP mode (configurable via QMI). However, Ethernet mode seems to be broken with most firmwares (network packets are actually received as Raw-IP), therefore the driver only supports Raw-IP mode. Note that the control channel (QMI/AT) is entirely separate from BAM-DMUX and is already supported by the RPMSG_WWAN_CTRL driver. The driver uses runtime PM to coordinate power control with the modem. TX/RX buffers are put in a kind of "ring queue" and submitted via the bam_dma driver of the DMAEngine subsystem. The basic architecture looks roughly like this: +------------+ +-------+ [IPv4/6] | BAM-DMUX | | | [Data...] | | | | ---------->|wwan0 | [DMUX chan: x] | | [IPv4/6] | (chan: 0) | [IPv4/6] | | [Data...] | | [Data...] | | ---------->|wwan1 |--------------->| Modem | | (chan: 1) | BAM | | [IPv4/6] | ... | (DMA Engine) | | [Data...] | | | | ---------->|wwan7 | | | | (chan: 7) | | | +------------+ +-------+ Note that some newer firmware versions support QMAP ("rmnet" driver) as additional multiplexing layer on top of BAM-DMUX, but this is not currently supported by this driver. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: wwan: iosm: device trace collection using relayfsM Chetan Kumar
This patch brings in support for device trace collection. It implements relayfs interface for pushing device trace from kernel space to user space. Driver gets the debugfs base directory associated to WWAN Device and creates trace_control and trace debugfs for device tracing. Both trace_control & trace debugfs are created under /sys/kernel/debug/wwan/wwan0/. In order to collect device trace on trace0 interface, user need to write 1 to trace_ctl interface. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: wwan: common debugfs base dir for wwan deviceM Chetan Kumar
This patch set brings in a common debugfs base directory i.e. /sys/kernel/debugfs/wwan/ in WWAN Subsystem for a WWAN device instance. So that it avoids driver polluting debugfs root with unrelated directories & possible name collusion. Having a common debugfs base directory for WWAN drivers eases user to match control devices with debugfs entries. WWAN Subsystem creates dentry (/sys/kernel/debugfs/wwan) on module load & removes dentry on module unload. When driver registers a new wwan device, dentry (wwanX) is created for WWAN device instance & on driver unregister dentry is removed. New API is introduced to return the wwan device instance dentry so that driver can create debugfs entries under it. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-11net: wwan: iosm: fix compilation warningM Chetan Kumar
curr_phase is unused. Removed the dead code. Fixes: 8d9be0634181 ("net: wwan: iosm: transport layer support for fw flashing/cd") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02net: wwan: iosm: correct devlink extra paramsM Chetan Kumar
1. Removed driver specific extra params like download_region, address & region_count. The required information is passed as part of flash API. 2. IOSM Devlink documentation updated to reflect the same. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27net: wwan: iosm: Move devlink_register to be last devlink commandLeon Romanovsky
This change prevents from users to access device before devlink is fully configured. Indirectly this change fixes the commit mentioned below where devlink_unregister() was prematurely removed. Fixes: db4278c55fa5 ("devlink: Make devlink_register to be void") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-24net: iosm: Use hrtimer_forward_now()Thomas Gleixner
hrtimer_forward_now() is providing the same functionality. Preparation for making hrtimer_forward() timer core code only. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: netdev@vger.kernel.org Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: M Chetan Kumar <m.chetan.kumar@intel.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Intel Corporation <linuxwwan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-22net: wwan: iosm: fw flashing and cd improvementsM Chetan Kumar
1> Function comments moved to .c file. 2> Use literals in return to improve readability. 3> Do error handling check instead of success check. 4> Redundant ret assignment removed. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-22devlink: Make devlink_register to be voidLeon Romanovsky
devlink_register() can't fail and always returns success, but all drivers are obligated to check returned status anyway. This adds a lot of boilerplate code to handle impossible flow. Make devlink_register() void and simplify the drivers that use that API call. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Simon Horman <simon.horman@corigine.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> # dsa Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: wwan: iosm: fw flashing & cd collection infrastructure changesM Chetan Kumar
IOSM Makefile & WWAN Kconfig changes to support fw flashing & cd collection module compliation. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: wwan: iosm: transport layer support for fw flashing/cdM Chetan Kumar
Implements transport layer protocol for fw flashing/coredump collection. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: wwan: iosm: coredump collection supportM Chetan Kumar
Implements protocol for coredump collection. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: wwan: iosm: fw flashing supportM Chetan Kumar
Implements protocol for fw flashing and PSI injection for coredump collection. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: wwan: iosm: devlink registrationM Chetan Kumar
Register with devlink framework and implment callbacks required for fw flashing and coredump collection. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16Revert "net: wwan: iosm: firmware flashing and coredump collection"Jakub Kicinski
The devlink parameters are not the right mechanism to pass extra parameters to device flashing. The params added are also undocumented. This reverts commit 13bb8429ca98 ("net: wwan: iosm: firmware flashing and coredump collection"). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14net: wwan: iosm: fix linux-next build errorM Chetan Kumar
Removed "stdbool.h" inclusion in iosm_ipc_imem.h Fixes: 13bb8429ca98 ("net: wwan: iosm: firmware flashing and coredump collection") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13net: wwan: iosm: firmware flashing and coredump collectionM Chetan Kumar
This patch brings-in support for M.2 7560 Device firmware flashing & coredump collection using devlink. - Driver Registers with Devlink framework. - Register devlink params callback for configuring device params required in flashing or coredump flow. - Implements devlink ops flash_update callback that programs modem firmware. - Creates region & snapshot required for device coredump log collection. On early detection of device in boot rom stage. Driver registers with Devlink framework and establish transport channel for PSI (Primary Signed Image) injection. Once PSI is injected to device, the device execution stage details are read to determine whether device is in flash or exception mode. The collected information is reported to devlink user space application & based on this informationi, application proceeds with either modem firmware flashing or coredump collection. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07Merge tag 'net-5.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes and stragglers from Jakub Kicinski: "Networking stragglers and fixes, including changes from netfilter, wireless and can. Current release - regressions: - qrtr: revert check in qrtr_endpoint_post(), fixes audio and wifi - ip_gre: validate csum_start only on pull - bnxt_en: fix 64-bit doorbell operation on 32-bit kernels - ionic: fix double use of queue-lock, fix a sleeping in atomic - can: c_can: fix null-ptr-deref on ioctl() - cs89x0: disable compile testing on powerpc Current release - new code bugs: - bridge: mcast: fix vlan port router deadlock, consistently disable BH Previous releases - regressions: - dsa: tag_rtl4_a: fix egress tags, only port 0 was working - mptcp: fix possible divide by zero - netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex - netfilter: socket: icmp6: fix use-after-scope - stmmac: fix MAC not working when system resume back with WoL active Previous releases - always broken: - ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address - seg6: set fc_nlinfo in nh_create_ipv4, nh_create_ipv6 - mptcp: only send extra TCP acks in eligible socket states - dsa: lantiq_gswip: fix maximum frame length - stmmac: fix overall budget calculation for rxtx_napi - bnxt_en: fix firmware version reporting via devlink - renesas: sh_eth: add missing barrier to fix freeing wrong tx descriptor Stragglers: - netfilter: conntrack: switch to siphash - netfilter: refuse insertion if chain has grown too large - ncsi: add get MAC address command to get Intel i210 MAC address" * tag 'net-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits) ieee802154: Remove redundant initialization of variable ret net: stmmac: fix MAC not working when system resume back with WoL active net: phylink: add suspend/resume support net: renesas: sh_eth: Fix freeing wrong tx descriptor bonding: 3ad: pass parameter bond_params by reference cxgb3: fix oops on module removal can: c_can: fix null-ptr-deref on ioctl() can: rcar_canfd: add __maybe_unused annotation to silence warning net: wwan: iosm: Unify IO accessors used in the driver net: wwan: iosm: Replace io.*64_lo_hi() with regular accessors net: qcom/emac: Replace strlcpy with strscpy ip6_gre: Revert "ip6_gre: add validation for csum_start" net: hns3: make hclgevf_cmd_caps_bit_map0 and hclge_cmd_caps_bit_map0 static selftests/bpf: Test XDP bonding nest and unwind bonding: Fix negative jump label count on nested bonding MAINTAINERS: add VM SOCKETS (AF_VSOCK) entry stmmac: dwmac-loongson:Fix missing return value iwlwifi: fix printk format warnings in uefi.c net: create netdev->dev_addr assignment helpers bnxt_en: Fix possible unintended driver initiated error recovery ...
2021-09-06net: wwan: iosm: Unify IO accessors used in the driverAndy Shevchenko
Currently we have readl()/writel()/ioread*()/iowrite*() APIs in use. Let's unify to use only ioread*()/iowrite*() variants. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-06net: wwan: iosm: Replace io.*64_lo_hi() with regular accessorsAndy Shevchenko
The io.*_lo_hi() variants are not strictly needed on the x86 hardware and especially the PCI bus. Replace them with regular accessors, but leave headers in place in case of 32-bit build. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-03Merge tag 'kbuild-v5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add -s option (strict mode) to merge_config.sh to make it fail when any symbol is redefined. - Show a warning if a different compiler is used for building external modules. - Infer --target from ARCH for CC=clang to let you cross-compile the kernel without CROSS_COMPILE. - Make the integrated assembler default (LLVM_IAS=1) for CC=clang. - Add <linux/stdarg.h> to the kernel source instead of borrowing <stdarg.h> from the compiler. - Add Nick Desaulniers as a Kbuild reviewer. - Drop stale cc-option tests. - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG to handle symbols in inline assembly. - Show a warning if 'FORCE' is missing for if_changed rules. - Various cleanups * tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kbuild: redo fake deps at include/ksym/*.h kbuild: clean up objtool_args slightly modpost: get the *.mod file path more simply checkkconfigsymbols.py: Fix the '--ignore' option kbuild: merge vmlinux_link() between ARCH=um and other architectures kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh kbuild: merge vmlinux_link() between the ordinary link and Clang LTO kbuild: remove stale *.symversions kbuild: remove unused quiet_cmd_update_lto_symversions gen_compile_commands: extract compiler command from a series of commands x86: remove cc-option-yn test for -mtune= arc: replace cc-option-yn uses with cc-option s390: replace cc-option-yn uses with cc-option ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild sparc: move the install rule to arch/sparc/Makefile security: remove unneeded subdir-$(CONFIG_...) kbuild: sh: remove unused install script kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y kbuild: Switch to 'f' variants of integrated assembler flag kbuild: Shuffle blank line to improve comment meaning ...
2021-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/wwan/mhi_wwan_mbim.c - drop the extra arg. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-26Revert "net: really fix the build..."Kalle Valo
This reverts commit ce78ffa3ef1681065ba451cfd545da6126f5ca88. Wren and Nicolas reported that ath11k was failing to initialise QCA6390 Wi-Fi 6 device with error: qcom_mhi_qrtr: probe of mhi0_IPCR failed with error -22 Commit ce78ffa3ef16 ("net: really fix the build..."), introduced in v5.14-rc5, caused this regression in qrtr. Most likely all ath11k devices are broken, but I only tested QCA6390. Let's revert the broken commit so that ath11k works again. Reported-by: Wren Turkal <wt@penguintechs.org> Reported-by: Nicolas Schichan <nschichan@freebox.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210826172816.24478-1-kvalo@codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-23net: wwan: iosm: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. 'ipc_protocol_init()' can use GFP_KERNEL, because this flag is already used by a 'kzalloc()' call a few lines above. 'ipc_protocol_msg_prepipe_open()' must use GFP_ATOMIC, because this flag is already used by a 'kcalloc()' call a few lines above. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/ptp/Kconfig: 55c8fca1dae1 ("ptp_pch: Restore dependency on PCI") e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-19isystem: trim/fixup stdarg.h and other headersAlexey Dobriyan
Delete/fixup few includes in anticipation of global -isystem compile option removal. Note: crypto/aegis128-neon-inner.c keeps <stddef.h> due to redefinition of uintptr_t error (one definition comes from <stddef.h>, another from <linux/types.h>). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-08-16net: iosm: Prevent underflow in ipc_chnl_cfg_get()Dan Carpenter
The bounds check on "index" doesn't catch negative values. Using ARRAY_SIZE() directly is more readable and more robust because it prevents negative values for "index". Fortunately we only pass valid values to ipc_chnl_cfg_get() so this patch does not affect runtime. Reported-by: Solomon Ucko <solly.ucko@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2024-06-03 09:27:04 +0000