summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2023-01-05Merge tag 'net-6.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, wifi, and netfilter. Current release - regressions: - bpf: fix nullness propagation for reg to reg comparisons, avoid null-deref - inet: control sockets should not use current thread task_frag - bpf: always use maximal size for copy_array() - eth: bnxt_en: don't link netdev to a devlink port for VFs Current release - new code bugs: - rxrpc: fix a couple of potential use-after-frees - netfilter: conntrack: fix IPv6 exthdr error check - wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes - eth: dsa: qca8k: various fixes for the in-band register access - eth: nfp: fix schedule in atomic context when sync mc address - eth: renesas: rswitch: fix getting mac address from device tree - mobile: ipa: use proper endpoint mask for suspend Previous releases - regressions: - tcp: add TIME_WAIT sockets in bhash2, fix regression caught by Jiri / python tests - net: tc: don't intepret cls results when asked to drop, fix oob-access - vrf: determine the dst using the original ifindex for multicast - eth: bnxt_en: - fix XDP RX path if BPF adjusted packet length - fix HDS (header placement) and jumbo thresholds for RX packets - eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf, avoid memory corruptions Previous releases - always broken: - ulp: prevent ULP without clone op from entering the LISTEN status - veth: fix race with AF_XDP exposing old or uninitialized descriptors - bpf: - pull before calling skb_postpull_rcsum() (fix checksum support and avoid a WARN()) - fix panic due to wrong pageattr of im->image (when livepatch and kretfunc coexist) - keep a reference to the mm, in case the task is dead - mptcp: fix deadlock in fastopen error path - netfilter: - nf_tables: perform type checking for existing sets - nf_tables: honor set timeout and garbage collection updates - ipset: fix hash:net,port,net hang with /0 subnet - ipset: avoid hung task warning when adding/deleting entries - selftests: net: - fix cmsg_so_mark.sh test hang on non-x86 systems - fix the arp_ndisc_evict_nocarrier test for IPv6 - usb: rndis_host: secure rndis_query check against int overflow - eth: r8169: fix dmar pte write access during suspend/resume with WOL - eth: lan966x: fix configuration of the PCS - eth: sparx5: fix reading of the MAC address - eth: qed: allow sleep in qed_mcp_trace_dump() - eth: hns3: - fix interrupts re-initialization after VF FLR - fix handling of promisc when MAC addr table gets full - refine the handling for VF heartbeat - eth: mlx5: - properly handle ingress QinQ-tagged packets on VST - fix io_eq_size and event_eq_size params validation on big endian - fix RoCE setting at HCA level if not supported at all - don't turn CQE compression on by default for IPoIB - eth: ena: - fix toeplitz initial hash key value - account for the number of XDP-processed bytes in interface stats - fix rx_copybreak value update Misc: - ethtool: harden phy stat handling against buggy drivers - docs: netdev: convert maintainer's doc from FAQ to a normal document" * tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) caif: fix memory leak in cfctrl_linkup_request() inet: control sockets should not use current thread task_frag net/ulp: prevent ULP without clone op from entering the LISTEN status qed: allow sleep in qed_mcp_trace_dump() MAINTAINERS: Update maintainers for ptp_vmw driver usb: rndis_host: Secure rndis_query check against int overflow net: dpaa: Fix dtsec check for PCS availability octeontx2-pf: Fix lmtst ID used in aura free drivers/net/bonding/bond_3ad: return when there's no aggregator netfilter: ipset: Rework long task execution when adding/deleting entries netfilter: ipset: fix hash:net,port,net hang with /0 subnet net: sparx5: Fix reading of the MAC address vxlan: Fix memory leaks in error path net: sched: htb: fix htb_classify() kernel-doc net: sched: cbq: dont intepret cls results when asked to drop net: sched: atm: dont intepret cls results when asked to drop dt-bindings: net: marvell,orion-mdio: Fix examples dt-bindings: net: sun8i-emac: Add phy-supply property net: ipa: use proper endpoint mask for suspend selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier ...
2023-01-04qed: allow sleep in qed_mcp_trace_dump()Caleb Sander
By default, qed_mcp_cmd_and_union() delays 10us at a time in a loop that can run 500K times, so calls to qed_mcp_nvm_rd_cmd() may block the current thread for over 5s. We observed thread scheduling delays over 700ms in production, with stacktraces pointing to this code as the culprit. qed_mcp_trace_dump() is called from ethtool, so sleeping is permitted. It already can sleep in qed_mcp_halt(), which calls qed_mcp_cmd(). Add a "can sleep" parameter to qed_find_nvram_image() and qed_nvram_read() so they can sleep during qed_mcp_trace_dump(). qed_mcp_trace_get_meta_info() and qed_mcp_trace_read_meta(), called only by qed_mcp_trace_dump(), allow these functions to sleep. I can't tell if the other caller (qed_grc_dump_mcp_hw_dump()) can sleep, so keep b_can_sleep set to false when it calls these functions. An example stacktrace from a custom warning we added to the kernel showing a thread that has not scheduled despite long needing resched: [ 2745.362925,17] ------------[ cut here ]------------ [ 2745.362941,17] WARNING: CPU: 23 PID: 5640 at arch/x86/kernel/irq.c:233 do_IRQ+0x15e/0x1a0() [ 2745.362946,17] Thread not rescheduled for 744 ms after irq 99 [ 2745.362956,17] Modules linked in: ... [ 2745.363339,17] CPU: 23 PID: 5640 Comm: lldpd Tainted: P O 4.4.182+ #202104120910+6d1da174272d.61x [ 2745.363343,17] Hardware name: FOXCONN MercuryB/Quicksilver Controller, BIOS H11P1N09 07/08/2020 [ 2745.363346,17] 0000000000000000 ffff885ec07c3ed8 ffffffff8131eb2f ffff885ec07c3f20 [ 2745.363358,17] ffffffff81d14f64 ffff885ec07c3f10 ffffffff81072ac2 ffff88be98ed0000 [ 2745.363369,17] 0000000000000063 0000000000000174 0000000000000074 0000000000000000 [ 2745.363379,17] Call Trace: [ 2745.363382,17] <IRQ> [<ffffffff8131eb2f>] dump_stack+0x8e/0xcf [ 2745.363393,17] [<ffffffff81072ac2>] warn_slowpath_common+0x82/0xc0 [ 2745.363398,17] [<ffffffff81072b4c>] warn_slowpath_fmt+0x4c/0x50 [ 2745.363404,17] [<ffffffff810d5a8e>] ? rcu_irq_exit+0xae/0xc0 [ 2745.363408,17] [<ffffffff817c99fe>] do_IRQ+0x15e/0x1a0 [ 2745.363413,17] [<ffffffff817c7ac9>] common_interrupt+0x89/0x89 [ 2745.363416,17] <EOI> [<ffffffff8132aa74>] ? delay_tsc+0x24/0x50 [ 2745.363425,17] [<ffffffff8132aa04>] __udelay+0x34/0x40 [ 2745.363457,17] [<ffffffffa04d45ff>] qed_mcp_cmd_and_union+0x36f/0x7d0 [qed] [ 2745.363473,17] [<ffffffffa04d5ced>] qed_mcp_nvm_rd_cmd+0x4d/0x90 [qed] [ 2745.363490,17] [<ffffffffa04e1dc7>] qed_mcp_trace_dump+0x4a7/0x630 [qed] [ 2745.363504,17] [<ffffffffa04e2556>] ? qed_fw_asserts_dump+0x1d6/0x1f0 [qed] [ 2745.363520,17] [<ffffffffa04e4ea7>] qed_dbg_mcp_trace_get_dump_buf_size+0x37/0x80 [qed] [ 2745.363536,17] [<ffffffffa04ea881>] qed_dbg_feature_size+0x61/0xa0 [qed] [ 2745.363551,17] [<ffffffffa04eb427>] qed_dbg_all_data_size+0x247/0x260 [qed] [ 2745.363560,17] [<ffffffffa0482c10>] qede_get_regs_len+0x30/0x40 [qede] [ 2745.363566,17] [<ffffffff816c9783>] ethtool_get_drvinfo+0xe3/0x190 [ 2745.363570,17] [<ffffffff816cc152>] dev_ethtool+0x1362/0x2140 [ 2745.363575,17] [<ffffffff8109bcc6>] ? finish_task_switch+0x76/0x260 [ 2745.363580,17] [<ffffffff817c2116>] ? __schedule+0x3c6/0x9d0 [ 2745.363585,17] [<ffffffff810dbd50>] ? hrtimer_start_range_ns+0x1d0/0x370 [ 2745.363589,17] [<ffffffff816c1e5b>] ? dev_get_by_name_rcu+0x6b/0x90 [ 2745.363594,17] [<ffffffff816de6a8>] dev_ioctl+0xe8/0x710 [ 2745.363599,17] [<ffffffff816a58a8>] sock_do_ioctl+0x48/0x60 [ 2745.363603,17] [<ffffffff816a5d87>] sock_ioctl+0x1c7/0x280 [ 2745.363608,17] [<ffffffff8111f393>] ? seccomp_phase1+0x83/0x220 [ 2745.363612,17] [<ffffffff811e3503>] do_vfs_ioctl+0x2b3/0x4e0 [ 2745.363616,17] [<ffffffff811e3771>] SyS_ioctl+0x41/0x70 [ 2745.363619,17] [<ffffffff817c6ffe>] entry_SYSCALL_64_fastpath+0x1e/0x79 [ 2745.363622,17] ---[ end trace f6954aa440266421 ]--- Fixes: c965db4446291 ("qed: Add support for debug data collection") Signed-off-by: Caleb Sander <csander@purestorage.com> Acked-by: Alok Prasad <palok@marvell.com> Link: https://lore.kernel.org/r/20230103233021.1457646-1-csander@purestorage.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-03usb: rndis_host: Secure rndis_query check against int overflowSzymon Heidrich
Variables off and len typed as uint32 in rndis_query function are controlled by incoming RNDIS response message thus their value may be manipulated. Setting off to a unexpectetly large value will cause the sum with len and 8 to overflow and pass the implemented validation step. Consequently the response pointer will be referring to a location past the expected buffer boundaries allowing information leakage e.g. via RNDIS_OID_802_3_PERMANENT_ADDRESS OID. Fixes: ddda08624013 ("USB: rndis_host, various cleanups") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-03net: dpaa: Fix dtsec check for PCS availabilitySean Anderson
We want to fail if the PCS is not available, not if it is available. Fix this condition. Fixes: 5d93cfcf7360 ("net: dpaa: Convert to phylink") Reported-by: Christian Zigotzky <info@xenosoft.de> Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-03octeontx2-pf: Fix lmtst ID used in aura freeGeetha sowjanya
Current code uses per_cpu pointer to get the lmtst_id mapped to the core on which aura_free() is executed. Using per_cpu pointer without preemption disable causing mismatch between lmtst_id and core on which pointer gets freed. This patch fixes the issue by disabling preemption around aura_free. Fixes: ef6c8da71eaf ("octeontx2-pf: cn10K: Reserve LMTST lines per core") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-03drivers/net/bonding/bond_3ad: return when there's no aggregatorDaniil Tatianin
Otherwise we would dereference a NULL aggregator pointer when calling __set_agg_ports_ready on the line below. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-02net: sparx5: Fix reading of the MAC addressHoratiu Vultur
There is an issue with the checking of the return value of 'of_get_mac_address', which returns 0 on success and negative value on failure. The driver interpretated the result the opposite way. Therefore if there was a MAC address defined in the DT, then the driver was generating a random MAC address otherwise it would use address 0. Fix this by checking correctly the return value of 'of_get_mac_address' Fixes: b74ef9f9cb91 ("net: sparx5: Do not use mac_addr uninitialized in mchp_sparx5_probe()") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-02vxlan: Fix memory leaks in error pathIdo Schimmel
The memory allocated by vxlan_vnigroup_init() is not freed in the error path, leading to memory leaks [1]. Fix by calling vxlan_vnigroup_uninit() in the error path. The leaks can be reproduced by annotating gro_cells_init() with ALLOW_ERROR_INJECTION() and then running: # echo "100" > /sys/kernel/debug/fail_function/probability # echo "1" > /sys/kernel/debug/fail_function/times # echo "gro_cells_init" > /sys/kernel/debug/fail_function/inject # printf %#x -12 > /sys/kernel/debug/fail_function/gro_cells_init/retval # ip link add name vxlan0 type vxlan dstport 4789 external vnifilter RTNETLINK answers: Cannot allocate memory [1] unreferenced object 0xffff88810db84a00 (size 512): comm "ip", pid 330, jiffies 4295010045 (age 66.016s) hex dump (first 32 bytes): f8 d5 76 0e 81 88 ff ff 01 00 00 00 00 00 00 02 ..v............. 03 00 04 00 48 00 00 00 00 00 00 01 04 00 01 00 ....H........... backtrace: [<ffffffff81a3097a>] kmalloc_trace+0x2a/0x60 [<ffffffff82f049fc>] vxlan_vnigroup_init+0x4c/0x160 [<ffffffff82ecd69e>] vxlan_init+0x1ae/0x280 [<ffffffff836858ca>] register_netdevice+0x57a/0x16d0 [<ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50 [<ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130 [<ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0 [<ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0 [<ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40 [<ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839066af>] netlink_unicast+0x53f/0x810 [<ffffffff839072d8>] netlink_sendmsg+0x958/0xe70 [<ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90 [<ffffffff835cd6da>] ___sys_sendmsg+0x13a/0x1e0 [<ffffffff835cd94c>] __sys_sendmsg+0x11c/0x1f0 [<ffffffff8424da78>] do_syscall_64+0x38/0x80 unreferenced object 0xffff88810e76d5f8 (size 192): comm "ip", pid 330, jiffies 4295010045 (age 66.016s) hex dump (first 32 bytes): 04 00 00 00 00 00 00 00 db e1 4f e7 00 00 00 00 ..........O..... 08 d6 76 0e 81 88 ff ff 08 d6 76 0e 81 88 ff ff ..v.......v..... backtrace: [<ffffffff81a3162e>] __kmalloc_node+0x4e/0x90 [<ffffffff81a0e166>] kvmalloc_node+0xa6/0x1f0 [<ffffffff8276e1a3>] bucket_table_alloc.isra.0+0x83/0x460 [<ffffffff8276f18b>] rhashtable_init+0x43b/0x7c0 [<ffffffff82f04a1c>] vxlan_vnigroup_init+0x6c/0x160 [<ffffffff82ecd69e>] vxlan_init+0x1ae/0x280 [<ffffffff836858ca>] register_netdevice+0x57a/0x16d0 [<ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50 [<ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130 [<ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0 [<ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0 [<ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40 [<ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839066af>] netlink_unicast+0x53f/0x810 [<ffffffff839072d8>] netlink_sendmsg+0x958/0xe70 [<ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90 Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01net: ipa: use proper endpoint mask for suspendAlex Elder
It is now possible for a system to have more than 32 endpoints. As a result, registers related to endpoint suspend are parameterized, with 32 endpoints represented in one more registers. In ipa_interrupt_suspend_control(), the IPA_SUSPEND_EN register offset is determined properly, but the bit mask used still assumes the number of enpoints won't exceed 32. This is a bug. Fix it. Fixes: f298ba785e2d ("net: ipa: add a parameter to suspend registers") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01net: dsa: qca8k: improve mdio master read/write by using single lo/hiChristian Marangi
Improve mdio master read/write by using singe mii read/write lo/hi. In a read and write we need to poll the mdio master regs in a busy loop to check for a specific bit present in the upper half of the reg. We can ignore the other half since it won't contain useful data. This will save an additional useless read for each read and write operation. In a read operation the returned data is present in the mdio master reg lower half. We can ignore the other half since it won't contain useful data. This will save an additional useless read for each read operation. In a read operation it's needed to just set the hi half of the mdio master reg as the lo half will be replaced by the result. This will save an additional useless write for each read operation. Tested-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01net: dsa: qca8k: introduce single mii read/write lo/hiChristian Marangi
It may be useful to read/write just the lo or hi half of a reg. This is especially useful for phy poll with the use of mdio master. The mdio master reg is composed by the first 16 bit related to setup and the other half with the returned data or data to write. Refactor the mii function to permit single mii read/write of lo or hi half of the reg. Tested-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01Revert "net: dsa: qca8k: cache lo and hi for mdio write"Christian Marangi
This reverts commit 2481d206fae7884cd07014fd1318e63af35e99eb. The Documentation is very confusing about the topic. The cache logic for hi and lo is wrong and actually miss some regs to be actually written. What the Documentation actually intended was that it's possible to skip writing hi OR lo if half of the reg is not needed to be written or read. Revert the change in favor of a better and correct implementation. Reported-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org # v5.18+ Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-01net: dsa: qca8k: fix wrong length value for mgmt eth packetChristian Marangi
The assumption that Documentation was right about how this value work was wrong. It was discovered that the length value of the mgmt header is in step of word size. As an example to process 4 byte of data the correct length to set is 2. To process 8 byte 4, 12 byte 6, 16 byte 8... Odd values will always return the next size on the ack packet. (length of 3 (6 byte) will always return 8 bytes of data) This means that a value of 15 (0xf) actually means reading/writing 32 bytes of data instead of 16 bytes. This behaviour is totally absent and not documented in the switch Documentation. In fact from Documentation the max value that mgmt eth can process is 16 byte of data while in reality it can process 32 bytes at once. To handle this we always round up the length after deviding it for word size. We check if the result is odd and we round another time to align to what the switch will provide in the ack packet. The workaround for the length limit of 15 is still needed as the length reg max value is 0xf(15) Reported-by: Ronald Wahl <ronald.wahl@raritan.com> Tested-by: Ronald Wahl <ronald.wahl@raritan.com> Fixes: 90386223f44e ("net: dsa: qca8k: add support for larger read/write size with mgmt Ethernet") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org # v5.18+ Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: phy: xgmiitorgmii: Fix refcount leak in xgmiitorgmii_probeMiaoqian Lin
of_phy_find_device() return device node with refcount incremented. Call put_device() to relese it when not needed anymore. Fixes: ab4e6ee578e8 ("net: phy: xgmiitorgmii: Check phy_driver ready before accessing") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: ena: Update NUMA TPH hint register upon NUMA node updateDavid Arinzon
The device supports a PCIe optimization hint, which indicates on which NUMA the queue is currently processed. This hint is utilized by PCIe in order to reduce its access time by accessing the correct NUMA resources and maintaining cache coherence. The driver calls the register update for the hint (called TPH - TLP Processing Hint) during the NAPI loop. Though the update is expected upon a NUMA change (when a queue is moved from one NUMA to the other), the current logic performs a register update when the queue is moved to a different CPU, but the CPU is not necessarily in a different NUMA. The changes include: 1. Performing the TPH update only when the queue has switched a NUMA node. 2. Moving the TPH update call to be triggered only when NAPI was scheduled from interrupt context, as opposed to a busy-polling loop. This is due to the fact that during busy-polling, the frequency of CPU switches for a particular queue is significantly higher, thus, the likelihood to switch NUMA is much higher. Therefore, providing the frequent updates to the device upon a NUMA update are unlikely to be beneficial. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: David Arinzon <darinzon@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: ena: Set default value for RX interrupt moderationDavid Arinzon
RX ring can be NULL in XDP use cases where only TX queues are configured. In this scenario, the RX interrupt moderation value sent to the device remains in its default value of 0. In this change, setting the default value of the RX interrupt moderation to be the same as of the TX. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: David Arinzon <darinzon@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: ena: Fix rx_copybreak value updateDavid Arinzon
Make the upper bound on rx_copybreak tighter, by making sure it is smaller than the minimum of mtu and ENA_PAGE_SIZE. With the current upper bound of mtu, rx_copybreak can be larger than a page. Such large rx_copybreak will not bring any performance benefit to the user and therefore makes no sense. In addition, the value update was only reflected in the adapter structure, but not applied for each ring, causing it to not take effect. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Osama Abboud <osamaabb@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: ena: Use bitmask to indicate packet redirectionDavid Arinzon
Redirecting packets with XDP Redirect is done in two phases: 1. A packet is passed by the driver to the kernel using xdp_do_redirect(). 2. After finishing polling for new packets the driver lets the kernel know that it can now process the redirected packet using xdp_do_flush_map(). The packets' redirection is handled in the napi context of the queue that called xdp_do_redirect() To avoid calling xdp_do_flush_map() each time the driver first checks whether any packets were redirected, using xdp_flags |= xdp_verdict; and if (xdp_flags & XDP_REDIRECT) xdp_do_flush_map() essentially treating XDP instructions as a bitmask, which isn't the case: enum xdp_action { XDP_ABORTED = 0, XDP_DROP, XDP_PASS, XDP_TX, XDP_REDIRECT, }; Given the current possible values of xdp_action, the current design doesn't have a bug (since XDP_REDIRECT = 100b), but it is still flawed. This patch makes the driver use a bitmask instead, to avoid future issues. Fixes: a318c70ad152 ("net: ena: introduce XDP redirect implementation") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: ena: Account for the number of processed bytes in XDPDavid Arinzon
The size of packets that were forwarded or dropped by XDP wasn't added to the total processed bytes statistic. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: ena: Don't register memory info on XDP exchangeDavid Arinzon
Since the queues aren't destroyed when we only exchange XDP programs, there's no need to re-register them again. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: ena: Fix toeplitz initial hash valueDavid Arinzon
On driver initialization, RSS hash initial value is set to zero, instead of the default value. This happens because we pass NULL as the RSS key parameter, which caused us to never initialize the RSS hash value. This patch fixes it by making sure the initial value is set, no matter what the value of the RSS key is. Fixes: 91a65b7d3ed8 ("net: ena: fix potential crash when rxfh key is NULL") Signed-off-by: Nati Koler <nkoler@amazon.com> Signed-off-by: David Arinzon <darinzon@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30Merge tag 'mlx5-fixes-2022-12-28' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux mlx5-fixes-2022-12-28
2022-12-30net: amd-xgbe: add missed tasklet_killJiguang Xiao
The driver does not call tasklet_kill in several places. Add the calls to fix it. Fixes: 85b85c853401 ("amd-xgbe: Re-issue interrupt if interrupt status not cleared") Signed-off-by: Jiguang Xiao <jiguang.xiao@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: hns3: refine the handling for VF heartbeatJian Shen
Currently, the PF check the VF alive by the KEEP_ALVE mailbox from VF. VF keep sending the mailbox per 2 seconds. Once PF lost the mailbox for more than 8 seconds, it will regards the VF is abnormal, and stop notifying the state change to VF, include link state, vf mac, reset, even though it receives the KEEP_ALIVE mailbox again. It's inreasonable. This patch fixes it. PF will record the state change which need to notify VF when lost the VF's KEEP_ALIVE mailbox. And notify VF when receive the mailbox again. Introduce a new flag HCLGE_VPORT_STATE_INITED, used to distinguish the case whether VF driver loaded or not. For VF will query these states when initializing, so it's unnecessary to notify it in this case. Fixes: aa5c4f175be6 ("net: hns3: add reset handling for VF when doing PF reset") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: ethernet: freescale: enetc: Drop empty platform remove functionUwe Kleine-König
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-30net: ethernet: broadcom: bcm63xx_enet: Drop empty platform remove functionUwe Kleine-König
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28net/mlx5: Lag, fix failure to cancel delayed bond workEli Cohen
Commit 0d4e8ed139d8 ("net/mlx5: Lag, avoid lockdep warnings") accidentally removed a call to cancel delayed bond work thus it may cause queued delay to expire and fall on an already destroyed work queue. Fix by restoring the call cancel_delayed_work_sync() before destroying the workqueue. This prevents call trace such as this: [ 329.230417] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 329.231444] #PF: supervisor write access in kernel mode [ 329.232233] #PF: error_code(0x0002) - not-present page [ 329.233007] PGD 0 P4D 0 [ 329.233476] Oops: 0002 [#1] SMP [ 329.234012] CPU: 5 PID: 145 Comm: kworker/u20:4 Tainted: G OE 6.0.0-rc5_mlnx #1 [ 329.235282] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 329.236868] Workqueue: mlx5_cmd_0000:08:00.1 cmd_work_handler [mlx5_core] [ 329.237886] RIP: 0010:_raw_spin_lock+0xc/0x20 [ 329.238585] Code: f0 0f b1 17 75 02 f3 c3 89 c6 e9 6f 3c 5f ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 02 f3 c3 89 c6 e9 45 3c 5f ff 0f 1f 44 00 00 0f 1f [ 329.241156] RSP: 0018:ffffc900001b0e98 EFLAGS: 00010046 [ 329.241940] RAX: 0000000000000000 RBX: ffffffff82374ae0 RCX: 0000000000000000 [ 329.242954] RDX: 0000000000000001 RSI: 0000000000000014 RDI: 0000000000000000 [ 329.243974] RBP: ffff888106ccf000 R08: ffff8881004000c8 R09: ffff888100400000 [ 329.244990] R10: 0000000000000000 R11: ffffffff826669f8 R12: 0000000000002000 [ 329.246009] R13: 0000000000000005 R14: ffff888100aa7ce0 R15: ffff88852ca80000 [ 329.247030] FS: 0000000000000000(0000) GS:ffff88852ca80000(0000) knlGS:0000000000000000 [ 329.248260] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 329.249111] CR2: 0000000000000000 CR3: 000000016d675001 CR4: 0000000000770ee0 [ 329.250133] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 329.251152] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 329.252176] PKRU: 55555554 Fixes: 0d4e8ed139d8 ("net/mlx5: Lag, avoid lockdep warnings") Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5e: Set geneve_tlv_option_0_exist when matching on geneve optionMaor Dickman
The cited patch added support of matching on geneve option by setting geneve_tlv_option_0_data mask and key but didn't set geneve_tlv_option_0_exist bit which is required on some HWs when matching geneve_tlv_option_0_data parameter, this may cause in some cases for packets to wrongly match on rules with different geneve option. Example of such case is packet with geneve_tlv_object class=789 and data=456 will wrongly match on rule with match geneve_tlv_object class=123 and data=456. Fix it by setting geneve_tlv_option_0_exist bit when supported by the HW when matching on geneve_tlv_option_0_data parameter. Fixes: 9272e3df3023 ("net/mlx5e: Geneve, Add support for encap/decap flows offload") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5e: Fix hw mtu initializing at XDP SQ allocationAdham Faris
Current xdp xmit functions logic (mlx5e_xmit_xdp_frame_mpwqe or mlx5e_xmit_xdp_frame), validates xdp packet length by comparing it to hw mtu (configured at xdp sq allocation) before xmiting it. This check does not account for ethernet fcs length (calculated and filled by the nic). Hence, when we try sending packets with length > (hw-mtu - ethernet-fcs-size), the device port drops it and tx_errors_phy is incremented. Desired behavior is to catch these packets and drop them by the driver. Fix this behavior in XDP SQ allocation function (mlx5e_alloc_xdpsq) by subtracting ethernet FCS header size (4 Bytes) from current hw mtu value, since ethernet FCS is calculated and written to ethernet frames by the nic. Fixes: d8bec2b29a82 ("net/mlx5e: Support bpf_xdp_adjust_head()") Signed-off-by: Adham Faris <afaris@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5e: Always clear dest encap in neigh-update-delChris Mi
The cited commit introduced a bug for multiple encapsulations flow. If one dest encap becomes invalid, the flow is set slow path flag. But when other dests encap become invalid, they are not cleared due to slow path flag of the flow. When neigh-update-add is running, it will use invalid encap. Fix it by checking slow path flag after clearing dest encap. Fixes: 9a5f9cc794e1 ("net/mlx5e: Fix possible use-after-free deleting fdb rule") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5e: CT: Fix ct debugfs folder nameChris Mi
Need to use sprintf to build a string instead of sscanf. Otherwise dirname is null and both "ct_nic" and "ct_fdb" won't be created. But its redundant anyway as driver could be in switchdev mode but still add nic rules. So use "ct" as folder name. Fixes: 77422a8f6f61 ("net/mlx5e: CT: Add ct driver counters") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5e: Fix RX reporter for XSK RQsTariq Toukan
RX reporter mistakenly reads from the regular (inactive) RQ when XSK RQ is active. Fix it here. Fixes: 3db4c85cde7a ("net/mlx5e: xsk: Use queue indices starting from 0 for XSK queues") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5e: IPoIB, Don't allow CQE compression to be turned on by defaultDragos Tatulea
mlx5e_build_nic_params will turn CQE compression on if the hardware capability is enabled and the slow_pci_heuristic condition is detected. As IPoIB doesn't support CQE compression, make sure to disable the feature in the IPoIB profile init. Please note that the feature is not exposed to the user for IPoIB interfaces, so it can't be subsequently turned on. Fixes: b797a684b0dd ("net/mlx5e: Enable CQE compression when PCI is slower than link") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5: Fix RoCE setting at HCA levelShay Drory
mlx5 PF can disable RoCE for its VFs and SFs. In such case RoCE is marked as unsupported on those VFs/SFs. The cited patch added an option for disable (and enable) RoCE at HCA level. However, that commit didn't check whether RoCE is supported on the HCA and enabled user to try and set RoCE to on. Fix it by checking whether the HCA supports RoCE. Fixes: fbfa97b4d79f ("net/mlx5: Disable roce at HCA level") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5: Avoid recovery in probe flowsShay Drory
Currently, recovery is done without considering whether the device is still in probe flow. This may lead to recovery before device have finished probed successfully. e.g.: while mlx5_init_one() is running. Recovery flow is using functionality that is loaded only by mlx5_init_one(), and there is no point in running recovery without mlx5_init_one() finished successfully. Fix it by waiting for probe flow to finish and checking whether the device is probed before trying to perform recovery. Fixes: 51d138c2610a ("net/mlx5: Fix health error state handling") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5: Fix io_eq_size and event_eq_size params validationShay Drory
io_eq_size and event_eq_size params are of param type DEVLINK_PARAM_TYPE_U32. But, the validation callback is addressing them as DEVLINK_PARAM_TYPE_U16. This cause mismatch in validation in big-endian systems, in which values in range were rejected while 268500991 was accepted. Fix it by checking the U32 value in the validation callback. Fixes: 0844fa5f7b89 ("net/mlx5: Let user configure io_eq_size param") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5: Add forgotten cleanup calls into mlx5_init_once() error pathJiri Pirko
There are two cleanup calls missing in mlx5_init_once() error path. Add them making the error path flow to be the same as mlx5_cleanup_once(). Fixes: 52ec462eca9b ("net/mlx5: Add reserved-gids support") Fixes: 7c39afb394c7 ("net/mlx5: PTP code migration to driver core section") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28net/mlx5: E-Switch, properly handle ingress tagged packets on VSTMoshe Shemesh
Fix SRIOV VST mode behavior to insert cvlan when a guest tag is already present in the frame. Previous VST mode behavior was to drop packets or override existing tag, depending on the device version. In this patch we fix this behavior by correctly building the HW steering rule with a push vlan action, or for older devices we ask the FW to stack the vlan when a vlan is already present. Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes") Fixes: dfcb1ed3c331 ("net/mlx5: E-Switch, Vport ingress/egress ACLs rules for VST mode") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-12-28r8169: fix dmar pte write access is not set errorChunhao Lin
When close device, if wol is enabled, rx will be enabled. When open device it will cause rx packet to be dma to the wrong memory address after pci_set_master() and system log will show blow messages. DMAR: DRHD: handling fault status reg 3 DMAR: [DMA Write] Request device [02:00.0] PASID ffffffff fault addr ffdd4000 [fault reason 05] PTE Write access is not set In this patch, driver disable tx/rx when close device. If wol is enabled, only enable rx filter and disable rxdv_gate(if support) to let hardware only receive packet to fifo but not to dma it. Signed-off-by: Chunhao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28r8169: move rtl_wol_enable_rx() and rtl_prepare_power_down()Chunhao Lin
There is no functional change. Moving these two functions for following patch "r8169: fix dmar pte write access is not set error". Signed-off-by: Chunhao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28bnxt_en: Fix HDS and jumbo thresholds for RX packetsMichael Chan
The recent XDP multi-buffer feature has introduced regressions in the setting of HDS and jumbo thresholds. HDS was accidentally disabled in the nornmal mode without XDP. This patch restores jumbo HDS placement when not in XDP mode. In XDP multi-buffer mode, HDS should be disabled and the jumbo threshold should be set to the usable page size in the first page buffer. Fixes: 32861236190b ("bnxt: change receive ring space parameters") Reviewed-by: Mohammad Shuab Siddique <mohammad-shuab.siddique@broadcom.com> Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28bnxt_en: Fix first buffer size calculations for XDP multi-bufferMichael Chan
The size of the first buffer is always page size, and the useable space is the page size minus the offset and the skb_shared_info size. Make sure SKB and XDP buf sizes match so that the skb_shared_info is at the same offset seen from the SKB and XDP_BUF. build_skb() should be passed PAGE_SIZE. xdp_init_buff() should be passed PAGE_SIZE as well. xdp_get_shared_info_from_buff() will automatically deduct the skb_shared_info size if the XDP buffer has frags. There is no need to keep bp->xdp_has_frags. Change BNXT_PAGE_MODE_BUF_SIZE to BNXT_MAX_PAGE_MODE_MTU_SBUF since this constant is really the MTU with ethernet header size subtracted. Also fix the BNXT_MAX_PAGE_MODE_MTU macro with proper parentheses. Fixes: 32861236190b ("bnxt: change receive ring space parameters") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28bnxt_en: Fix XDP RX pathMichael Chan
The XDP program can change the starting address of the RX data buffer and this information needs to be passed back from bnxt_rx_xdp() to bnxt_rx_pkt() for the XDP_PASS case so that the SKB can point correctly to the modified buffer address. Add back the data_ptr parameter to bnxt_rx_xdp() to make this work. Fixes: b231c3f3414c ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28bnxt_en: Simplify bnxt_xdp_buff_init()Michael Chan
bnxt_xdp_buff_init() does not modify the data_ptr or the len parameters, so no need to pass in the addresses of these parameters. Fixes: b231c3f3414c ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28bnxt_en: fix devlink port registration to netdevVikas Gupta
We don't register a devlink port in case of a VF so avoid setting the devlink pointer to netdev. Also, SET_NETDEV_DEVLINK_PORT has to be moved so that we determine whether the device is PF/VF first. This fixes the NULL pointer dereference of devlink_port->devlink when creating VFs: BUG: kernel NULL pointer dereference, address: 0000000000000160 PGD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 14 PID: 388 Comm: kworker/14:1 Kdump: loaded Not tainted 6.1.0-rc8 #5 Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.3.8 08/31/2021 Workqueue: events work_for_cpu_fn RIP: 0010:devlink_nl_port_handle_size+0xb/0x50 Code: 83 c4 10 5b 5d c3 cc cc cc cc b8 a6 ff ff ff eb de e8 c9 59 21 00 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 53 48 8b 47 20 <48> 8b a8 60 01 00 00 48 8b 45 60 48 8b 38 e8 92 90 1a 00 48 8b 7d RSP: 0018:ff4fe5394846fcd8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000794 RCX: 0000000000000000 RDX: ff1f129683a30a40 RSI: 0000000000000008 RDI: ff1f1296bb496188 RBP: 0000000000000334 R08: 0000000000000cc0 R09: 0000000000000000 R10: ff1f1296bb494298 R11: ffffffffffffffc0 R12: 0000000000000000 R13: 0000000000000000 R14: ff1f1296bb494000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ff1f129e5fa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000160 CR3: 000000131f610006 CR4: 0000000000771ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> if_nlmsg_size+0x14a/0x220 rtmsg_ifinfo_build_skb+0x3c/0x100 rtmsg_ifinfo+0x9c/0xc0 register_netdevice+0x59d/0x670 register_netdev+0x1c/0x40 bnxt_init_one+0x674/0xa60 [bnxt_en] local_pci_probe+0x42/0x80 work_for_cpu_fn+0x13/0x20 process_one_work+0x1e2/0x3b0 ? rescuer_thread+0x390/0x390 worker_thread+0x1c4/0x3a0 ? rescuer_thread+0x390/0x390 kthread+0xd6/0x100 ? kthread_complete_and_exit+0x20/0x20 Fixes: ac73d4bf2cda ("net: make drivers to use SET_NETDEV_DEVLINK_PORT to set devlink_port") Cc: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28net: ethernet: renesas: rswitch: Fix getting mac address from device treeYoshihiro Shimoda
To get mac address from device tree which is from each ethernet-port, fix the first argument of of_get_ethdev_address(). Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-28net: ethernet: renesas: rswitch: Fix error path in renesas_eth_sw_probe()Yoshihiro Shimoda
If rswitch_init() returns non-zero and this driver is re-probed, the following error happens: renesas_eth_sw e6880000.ethernet: Unbalanced pm_runtime_enable! So, fix error path in renesas_eth_sw_probe(). Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-26net: ethernet: marvell: octeontx2: Fix uninitialized variable warningAnuradha Weeraman
Fix for uninitialized variable warning. Addresses-Coverity: ("Uninitialized scalar variable") Signed-off-by: Anuradha Weeraman <anuradha@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-26net: dsa: mv88e6xxx: depend on PTP conditionallyJohnny S. Lee
PTP hardware timestamping related objects are not linked when PTP support for MV88E6xxx (NET_DSA_MV88E6XXX_PTP) is disabled, therefore NET_DSA_MV88E6XXX should not depend on PTP_1588_CLOCK_OPTIONAL regardless of NET_DSA_MV88E6XXX_PTP. Instead, condition more strictly on how NET_DSA_MV88E6XXX_PTP's dependencies are met, making sure that it cannot be enabled when NET_DSA_MV88E6XXX=y and PTP_1588_CLOCK=m. In other words, this commit allows NET_DSA_MV88E6XXX to be built-in while PTP_1588_CLOCK is a module, as long as NET_DSA_MV88E6XXX_PTP is prevented from being enabled. Fixes: e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") Signed-off-by: Johnny S. Lee <foss@jsl.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-26qlcnic: prevent ->dcb use-after-free on qlcnic_dcb_enable() failureDaniil Tatianin
adapter->dcb would get silently freed inside qlcnic_dcb_enable() in case qlcnic_dcb_attach() would return an error, which always happens under OOM conditions. This would lead to use-after-free because both of the existing callers invoke qlcnic_dcb_get_info() on the obtained pointer, which is potentially freed at that point. Propagate errors from qlcnic_dcb_enable(), and instead free the dcb pointer at callsite using qlcnic_dcb_free(). This also removes the now unused qlcnic_clear_dcb_ops() helper, which was a simple wrapper around kfree() also causing memory leaks for partially initialized dcb. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: 3c44bba1d270 ("qlcnic: Disable DCB operations from SR-IOV VFs") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-03-22 23:56:32 +0000