summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-07-27tg3: Reintroduce tg3_tx_ring_infoMatt Carlson
The following patches will require the use of an additional flag in the ring_info structure. The use of this flag is tx path specific, so this patch defines a specialized ring_info structure. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27ASIX: Use only 11 bits of header for data sizeMarek Vasut
The AX88772B uses only 11 bits of the header for the actual size. The other bits are used for something else. This causes dmesg full of messages: asix_rx_fixup() Bad Header Length This patch trims the check to only 11 bits. I believe on older chips, the remaining 5 top bits are unused. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27ASIX: Simplify condition in rx_fixup()Marek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27Fix cdc-phonet buildChris Clayton
Try to send to correct address this time! ---------- Forwarded Message ---------- Subject: [PATCH] Fix cdc-phonet build Date: Saturday 23 Jul 2011 From: Chris Clayton <chris2553@googlemail.com> To: linux-net@vger.kernel.org cdc-phonet does not presently build on linux-3.0 because there is no entry for it in drivers/net/Makefile. This patch adds that entry. Signed-off-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27bonding: reduce noise during initAndy Gospodarek
On Tue, Jul 26, 2011 at 05:40:27PM -0700, Joe Perches wrote: > On Tue, 2011-07-26 at 17:37 -0700, Jay Vosburgh wrote: > > Joe Perches <joe@perches.com> wrote: > > >I'd prefer you don't separate the format string > > >into multiple pieces. > > Why not? To me, it looks easier to read split into sections > > that don't wrap lines. > > Harder to grep for a dmesg and the > defect rate of these split formats is > typically higher than single strings > because of bad spacing between string > segments. > I noticed that you took some time back in late 2009 to 'consolidate' the split format-strings present in the bonding driver at the time and I've decided I'm fine to leave them the way they are. The main point of my patch was to change the output and I would like to get that included. Here is my updated patch... Subject: [PATCH net-next-2.6 v2] bonding: reduce noise during init Many are using sysfs to configure bonding rather than module options, so there is no need for bonding to throw this warning in normal cases. Keep the message around when debugging is enabled as it might be useful for someone desperate enough to enable debugging, but eliminate it otherwise. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27bonding: fix string comparison errorsAndy Gospodarek
When a bond contains a device where one name is the subset of another (eth1 and eth10, for example), one cannot properly set the primary device or the currently active device. This was reported and based on work by Takuma Umeya. I also verified the problem and tested that this fix resolves it. V2: A few did not like the the current code or my changes, so I refactored bonding_store_primary and bonding_store_active_slave to be a bit cleaner, dropped the use of strnicmp since we did not really need the comparison to be case insensitive, and formatted the input string from sysfs so a comparison to IFNAMSIZ could be used. I also discovered an error in bonding_store_active_slave that would modify bond->primary_slave rather than bond->curr_active_slave before forcing the bonding driver to choose a new active slave. V3: Actually sending the proper patch.... Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Reported-by: Takuma Umeya <tumeya@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27net: Audit drivers to identify those needing IFF_TX_SKB_SHARING clearedNeil Horman
After the last patch, We are left in a state in which only drivers calling ether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real hardware call ether_setup for their net_devices and don't hold any state in their skbs. There are a handful of drivers that violate this assumption of course, and need to be fixed up. This patch identifies those drivers, and marks them as not being able to support the safe transmission of skbs by clearning the IFF_TX_SKB_SHARING flag in priv_flags Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Karsten Keil <isdn@linux-pingi.de> CC: "David S. Miller" <davem@davemloft.net> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Patrick McHardy <kaber@trash.net> CC: Krzysztof Halasa <khc@pm.waw.pl> CC: "John W. Linville" <linville@tuxdriver.com> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Marcel Holtmann <marcel@holtmann.org> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27forcedeth: fix vlansJiri Pirko
For some reason, when rxaccel is disabled, NV_RX3_VLAN_TAG_PRESENT is still set and some pseudorandom vids appear. So check for NETIF_F_HW_VLAN_RX as well. Also set correctly hw_features and set vlan mode on probe. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27gianfar: fix bug caused by 87c288c6e9aa31720b72e2bc2d665e24e1653c3eSebastian Pöhn
commit 87c288c6e9aa31720b72e2bc2d665e24e1653c3e "gianfar: do vlan cleanup" has two issues: # permutation of rx and tx flags # enabling vlan tag insertion by default (this leads to unusable connections on some configurations) If VLAN insertion is requested (via ethtool) it will be set at an other point ... Signed-off-by: Sebastian Poehn <sebastian.poehn@belden.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-07-26Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-07-26b43: fix invalid memory access in b43_ssb_remove()Pavel Roskin
wldev is freed in b43_one_core_detach() and should not be accessed after that call. Keep wldev->dev in a local variable. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-26b43: bcma: drop BROKENRafał Miłecki
We've fixed the last issue with BCMA support which caused memory corruption on loading and unloading b43. Support for BCMA in b43 was tested with 14e4:4353, 14e4:4357, 14e4:4727 and 14e4:4331. First two cards (BCM43224 and BCM43225) are supported. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-26b43: bus: fix memory corruption when setting driver's dataRafał Miłecki
Fixes bug described in: https://bugzilla.kernel.org/show_bug.cgi?id=39172 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-25acenic: use netdev_alloc_skb_ip_alignstephen hemminger
Take Eric's patch one step further. Use netdev_skb_ip_align to do setup the receive skb. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-24bnx2x: use pci_pcie_cap()Vladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: fix bnx2x_stop_on_error flow in bnx2x_sp_rtnl_taskVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: enable internal target-read for 57712 and up onlyShmulik Ravid
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: count statistic ramrods on EQ to prevent MC assertVladislav Zolotarov
This patch includes: - Counting statistics ramrods as EQ ramrods the way they should be. This accounting is meant to prevent MC asserts in case of software bugs. - Fixes in debug facilities which were added while working on one of such bugs. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: fix loopback for non 10G linkYaniv Rosner
Also fixes minor formatting in that function. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24bnx2x: dcb - send all unmapped priorities to same COS as L2Dmitry Kravkov
As a result of DCBX negotiation some priorities maybe untouched and still unmapped to any COS; instead of sending them to COS0 we assign them to the same COS as L2 traffic - to avoid collisions with storage class of service. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-24iwlwifi: Fix build with CONFIG_PM disabled.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23via-velocity: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in drivers/net/via-velocity.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23qlge: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in drivers/net/qlge/qlge_main.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23igb: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in drivers/net/igb/igb_main.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23can: c_can: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in drivers/net/can/c_can/c_can.c drivers/net/can/c_can/c_can_platform.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23bnad: remove duplicated #includeHuang Weiyi
Remove duplicated #include('s) in drivers/net/bna/bnad.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22Merge branch 'for-davem' of ↵David S. Miller
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-07-22bna: Header File ConsolidationRasesh Mody
Change details: - Consolidated bfa_sm.h and bfa_wc.h into bfa_cs.h Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: HW Error Counter FixRasesh Mody
Change details: - Heartbeat failure counter is not incrementing under some scenarios. Update hbfails and hb_count stats during hwerror event. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: Add HW Semaphore Unlock LogicRasesh Mody
Change details: - Added logic to unlock hw semaphore if the previos FW boot was from boot code (flash based) and the current FW initialization attempt is from OS driver. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: IOC Event Name ChangeRasesh Mody
Change details: - Changed event name IOC_E_PFAILED to IOC_E_PFFAILED Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: Mboxq Flush When IOC DisabledRasesh Mody
Change details: - If there is a command pending in the mailbox, bfa_ioc_mbox_queue() enqueues the mailbox command to a pending command queue. Entries in this queue are not flushed when IOC is disabled. As a result, when IOC is re-enabled again, the stale entries in the pending command queue are posted to the mailbox. When these mailbox commands are processed by the FW and responses are sent, unexpected events are received by other modules' FSMs (f.e. bfa_msgq) which have not posted any mailbox commands after IOC was enabled. - Flush the pending mailbox command queue when IOC is disabled. Rename bfa_ioc_mbox_hbfail to bfa_ioc_mbox_flush. Call bfa_ioc_mbox_flush from bfa_iocpf_sm_disabled_entry() Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: Minor IRQ Index and Definition ChangeRasesh Mody
Change details: - Always set mbox irq index to zero and make corresponding changes in mbox irq alloc/sync function and txrx irq index calculation. Add definition of BNAD_INTX_TX_IB_BITMASK & BNAD_INTX_RX_IB_BITMASK and update bnad_txrx_irq_alloc accordingly. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: State Machine Fault Handling CleanupRasesh Mody
Chnage details: - The module name is not used in case of state machine fault, hence no longer passing the module name to the fault handler. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: IOC Event Notification EnhancementRasesh Mody
Change details: - Replace IOC HB failure event notification with a more generic mechanism that is capable of sending enble, disable, and failed events to registered modules. As a result, cee module event handling callback bfa_cee_hbfail() is replaced with bfa_cee_notify() so that it can receive and handle different events from IOC. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: CheckPatch CleanupRasesh Mody
Change details: - Driver cleanup as per new checkpatch v0.31 Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22bna: Print Driver VersionRasesh Mody
Change details: - Print the dirver version when module is loaded. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22sbni: use pci_dev->subsystem_deviceSergei Shtylyov
The driver reads PCI subsystem ID from the PCI configuration register while it's already stored by the PCI subsystem in the 'subsystem_device' field of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22r8169: use pci_dev->subsystem_{vendor|device}Sergei Shtylyov
The driver reads PCI subsystem IDs from the PCI configuration registers while they are already stored by the PCI subsystem in the 'subsystem_{vendor|device}' fields of 'struct pci_dev'... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-07-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (26 commits) IB/qib: Defer HCA error events to tasklet mlx4_core: Bump the driver version to 1.0 RDMA/cxgb4: Use printk_ratelimited() instead of printk_ratelimit() IB/mlx4: Support PMA counters for IBoE IB/mlx4: Use flow counters on IBoE ports IB/pma: Add include file for IBA performance counters definitions mlx4_core: Add network flow counters mlx4_core: Fix location of counter index in QP context struct mlx4_core: Read extended capabilities into the flags field mlx4_core: Extend capability flags to 64 bits IB/mlx4: Generate GID change events in IBoE code IB/core: Add GID change event RDMA/cma: Don't allow IPoIB port space for IBoE RDMA: Allow for NULL .modify_device() and .modify_port() methods IB/qib: Update active link width IB/qib: Fix potential deadlock with link down interrupt IB/qib: Add sysfs interface to read free contexts IB/mthca: Remove unnecessary read of PCI_CAP_ID_EXP IB/qib: Remove double define IB/qib: Remove unnecessary read of PCI_CAP_ID_EXP ...
2011-07-22b43legacy: dma: cache translation (routing bits)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-22ath5k: use get_unaligned_le32() in ath5k_write_pwr_to_pdadc_table()Pavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-22ath5k: remove ath5k_hw_get_capability(), don't use VEOL on AR5210Pavel Roskin
There are only two capabilities we need, and both are trivial to find. ath5k_hw_hasbssidmask() is true on AR5212, but not on AR5210 or AR5211. ath5k_hw_hasveol() is true on AR5211 and AR5212, but not on AR5210, according to the HAL source. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-22ath5k: merge ath5k_{init, deinit}_hw() with their thin wrappersPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-22b43: (un)initialize driver on the BCMA busRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-22b43: bcma: get DMA translation bitsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-22ssb: return correct translation bit for 64-bit DMARafał Miłecki
Remove b43's workarounds at the same time. Other users of ssb_dma_translation do not support any 64-bit DMA devices, so they are not affected. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-05-31 03:50:04 +0000