summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2012-05-16brcmsmac: handle non pci in ai_deviceremoved()Hauke Mehrtens
This is based on code from the Broadcom SDK. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: read PCI vendor and device id only for PCI devicesHauke Mehrtens
If brcmsmac is used on non PCI(s) devices it should not try to access bus->host_pci. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: do not access host_pciHauke Mehrtens
The irq number is copied from the PCIe host device to the bcma cores so just request it using the bcma core device. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove nicpci.cHauke Mehrtens
There is no code doing anything useful in nicpci.c anymore, so remove it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove pcicore_fixcfg()Hauke Mehrtens
This is now done in bcma by bcma_core_pci_fixcfg(). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove pcie_extendL1timer()Hauke Mehrtens
This is now done by calling bcma_core_pci_extend_L1time() Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove pcicore_find_pci_capability()Hauke Mehrtens
This function is now unreferenced Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove pcicore_attach()Hauke Mehrtens
This is already done by bcma in bcma_pcicore_serdes_workaround(). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove _ai_clkctl_cc()Hauke Mehrtens
This is now done by calling bcma_core_set_clockmode() Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove ai_gpiocontrol()Hauke Mehrtens
This is now done by calling bcma_chipco_gpio_control(). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove ai_chipcontrl_epa4331Hauke Mehrtens
ai_chipcontrl_epa4331 is not referenced by any method in brcmsmac and the functionality is already in bcma_chipco_bcm4331_ext_pa_lines_ctl in drivers/bcma/driver_chipcommon_pmu.c Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove ai_pci_setup()Hauke Mehrtens
This is now done by calling bcma_core_pci_irq_ctl() Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove pcicore_hwup()Hauke Mehrtens
This is now done by bcma_core_pci_config_fixup() in drivers/bcma/driver_pci.c Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove PCIe functions needed for PCIe core rev <= 10Hauke Mehrtens
The devices I know of are not using a PCIe core with rev <= 10. The BCM4718 uses a PCIe core with revision 14 and the BCM43224 uses a PCIe core with revision 15. This patch removes support for old PCIe core versions, which are not found on devices supported by brcmsmac. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove references to PCIHauke Mehrtens
There are no devices which are using bcma and have a PCI bus, just a PCIe bus or something else. bcma does not support PCI devices, so lets also remove PCI support from brcmsmac. All devices currently supported by brcmsmac are PCIe based. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove support for cc rev < 20Hauke Mehrtens
The lowest chip common version used on bcma based devices is 31 on the bcm4718 and 32 on the bcm4313, bcm43224, and bcm43225, so the support for the old versions could be removed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: get board and chip info from bcmaHauke Mehrtens
bcma now provide this data and brcmsmac should get it from there and not parse it by its self. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: remove brcmsmac own sprom parsingHauke Mehrtens
brcmsmac now takes the sprom from bcma and do not uses its own sprom parsing any more. Remove this code as it is not used any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16brcmsmac: use sprom from bcmaHauke Mehrtens
bcma now provides all sprom attributes needed by brcmsmac and also parses them from the pci sprom ant otp. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16bcma: add boardinfo structHauke Mehrtens
This struct contains information about the board, the chip is running on. The struct is filled for PCIe devices and SoCs. This information is used by b43 and will be used by brcmsmac soon. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16ssb: remove rev from boardinfoHauke Mehrtens
Previously the rev contained the revision read from the pci config space and was used as board_rev in the wireless drivers. This is wrong the board_rev is only fetched from the sprom accordingly to the open source part of the Broadcom SDK and brcmsmac. This patch removes the rev from the boardinfo structure and uses the board_rev attribute from sprom instead. This attribute is filled by PCI, PCMCIA, SDIO and SoC code. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16Merge branch 'for-linville' of git://github.com/kvalo/ath6klJohn W. Linville
2012-05-15wlcore/wl12xx: implement better beacon loss handlingBartosz.Markowski@tieto.com
Make use of REGAINED_BSS_EVENT and instead of reporting connection loss immediately on each BEACON_LOSE event, try if not regained in reasonable period of time. Signed-off-by: bartosz.markowski <bartosz.markowski@tieto.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-05-15wlcore: fix size of two memset's in wl1271_cmd_build_arp_rsp()Jesper Juhl
We currently do this: int wl1271_cmd_build_arp_rsp(struct wl1271 *wl, struct wl12xx_vif *wlvif) ... struct wl12xx_arp_rsp_template *tmpl; struct ieee80211_hdr_3addr *hdr; ... tmpl = (struct wl12xx_arp_rsp_template *)skb_put(skb, sizeof(*tmpl)); memset(tmpl, 0, sizeof(tmpl)); ... hdr = (struct ieee80211_hdr_3addr *)skb_push(skb, sizeof(*hdr)); memset(hdr, 0, sizeof(hdr)); ... I believe we want to set the entire structures to 0 with those memset() calls, not just zero the initial part of them (size of the pointer bytes). Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-05-15wireless: TI wlxxx depends on MAC80211Randy Dunlap
wl12xx build fails with many undefined symbol errors when MAC80211 and CFG80211 are not enabled, so make WLCORE and WL12XX depend on MAC80211 (which already depends on CFG80211). Here are a few of the many build errors: drivers/built-in.o: In function `wl1271_register_hw': main.c:(.text+0x4197cd): undefined reference to `ieee80211_register_hw' drivers/built-in.o: In function `wl1271_rx_streaming_timer': main.c:(.text+0x419818): undefined reference to `ieee80211_queue_work' drivers/built-in.o: In function `wl1271_flush_deferred_work': main.c:(.text+0x419910): undefined reference to `ieee80211_rx' main.c:(.text+0x419938): undefined reference to `ieee80211_tx_status' drivers/built-in.o: In function `wl12xx_op_channel_switch': main.c:(.text+0x419afc): undefined reference to `ieee80211_chswitch_done' drivers/built-in.o: In function `wl1271_ssid_set': drivers/built-in.o: In function `wl1271_event_process': event.c:(.text+0x41fec4): undefined reference to `ieee80211_sched_scan_stopped' event.c:(.text+0x41ff88): undefined reference to `ieee80211_cqm_rssi_notify' event.c:(.text+0x42000d): undefined reference to `ieee80211_stop_rx_ba_session' event.c:(.text+0x420048): undefined reference to `ieee80211_stop_rx_ba_session' event.c:(.text+0x4200b8): undefined reference to `ieee80211_chswitch_done' event.c:(.text+0x4201ae): undefined reference to `ieee80211_find_sta' event.c:(.text+0x4201ba): undefined reference to `ieee80211_report_low_ack' event.c:(.text+0x42021b): undefined reference to `ieee80211_connection_loss' drivers/built-in.o: In function `wl1271_tx_complete_packet': tx.c:(.text+0x4206a6): undefined reference to `ieee80211_get_hdrlen_from_skb' drivers/built-in.o: In function `wl1271_tx_fill_hdr': tx.c:(.text+0x4208ca): undefined reference to `ieee80211_hdrlen' drivers/built-in.o: In function `wl1271_handle_tx_low_watermark': (.text+0x420e25): undefined reference to `ieee80211_wake_queue' drivers/built-in.o: In function `wl12xx_rearm_rx_streaming': (.text+0x420ed9): undefined reference to `ieee80211_queue_work' drivers/built-in.o: In function `wl1271_tx_work_locked': (.text+0x421008): undefined reference to `ieee80211_free_txskb' drivers/built-in.o: In function `wl1271_rx_status.clone.2': rx.c:(.text+0x421593): undefined reference to `ieee80211_channel_to_frequency' drivers/built-in.o: In function `wl1271_ps_filter_frames': ps.c:(.text+0x421a41): undefined reference to `ieee80211_tx_status' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Luciano Coelho <coelho@ti.com> Cc: linux-wireless@vger.kernel.org Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-05-15wlcore: fixup an allocationDan Carpenter
GFP_DMA isn't supposed to be used by itself. This allocation is allowed to sleep so it should be ORing it with GFP_KERNEL. Also we should check for allocations errors. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-05-15wlcore: release lock on error in wl1271_op_suspend()Dan Carpenter
We should release this lock before returning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-05-15wl12xx: support wowlan wakeup patternsEyal Shapira
Use FW RX data filters to support cfg80211 wowlan wakeup patterns. This enables to wake up the host from suspend following detection of certain configurable patterns within an incoming packet. Up to 5 patterns are supported. Once the host is resumed any configured RX data filter is cleared. A single pattern can match several bytes sequences with different offsets within a packet. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-05-15wlcore: add RX filters driver state mgmt functionsEyal Shapira
More prep work to support wowlan wakeup patterns. Added some wrappers that also keep the current filters state updated in the driver. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-05-15wl12xx: add RX filters ACX commandsEyal Shapira
More prep work for wowlan patterns. Added ACXs to set global RX filter behavior and enable or disable a specific filter. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-05-15wlcore: add RX filters util functionsEyal Shapira
This is prep work for the support of wowlan patterns using the FW data rx filters mechanism. Added an rx filter struct and some util functions required to manipulate it. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-05-15wlcore: use GFP_KERNEL together with GFP_DMALuciano Coelho
GFP_DMA should not be used by itself, it still needs GFP_KERNEL or such. Fix two occurrences of allocations with GFP_DMA only. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-05-15b43legacy: Fix error due to MMIO access with SSB unpoweredLarry Finger
There is a dummy read of a PCI MMIO register that occurs before the SSB bus has been powered, which is an error. This bug has not been seen earlier, but was apparently exposed when udev was updated to version 182. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15brcmfmac: replace brcmf_sdioh_card_regread with brcmf_sdio_regrlFranky Lin
Use the newly introduced brcmf_sdio_regrl to replace brcmf_sdioh_card_regread as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15brcmfmac: remove function brcmf_sdcard_regfailFranky Lin
The new interface brcmf_sdio_regr/w provides result of access attempts. It is no longer necessary to use dedicated variable and function to provide enquiry for failure. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15brcmfmac: remove redundant retries for SDIO core register accessFranky Lin
The new brcmf_sdio_regrl/regwl interface has already performed retries on failed attempts. It is no longer necessary to have the retry mechanism in r_sdreg32/w_sdreg32. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15brcmfmac: replace brcmf_sdcard_reg_write with brcmf_sdio_regwlFranky Lin
Use the newly introduced brcmf_sdio_regwl to replace brcmf_sdcard_reg_write as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15brcmfmac: replace brcmf_sdcard_reg_read with brcmf_sdio_regrlFranky Lin
Use the newly introduced brcmf_sdio_regrl to replace brcmf_sdcard_reg_read as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15brcmfmac: replace brcmf_sdcard_cfg_write with brcmf_sdio_regwbFranky Lin
Use the newly introduced brcmf_sdio_regwb to replace brcmf_sdcard_cfg_write as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15brcmfmac: replace brcmf_sdcard_cfg_read with brcmf_sdio_regrbFranky Lin
Use the newly introduced brcmf_sdio_regrb to replace brcmf_sdcard_cfg_read as part of the SDIO WiFi dongle register access interface clean up. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15brcmfmac: introduce unified register access interface for SDIOFranky Lin
Both brcmf_sdcard_cfg_read/write and brcmf_sdcard_reg_read/write are used as interface functions for register access of SDIO WiFi dongle. A unified interface brcmf_sdio_regr/w is introduced in this patch in order to simplify the interface and keep the complexity within the lower layer. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15brcmfmac: decouple set_sbaddr_window from register write interfaceFranky Lin
brcmf_sdcard_set_sbaddr_window configures 3 registers on SDIO function misc bank to change current silicon backplane programming window. This patch makes it call brcmf_sdioh_request_byte directly in order to prepare for the write register interface unification. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15brcmfmac: remove unused parameter of brcmf_sdcard_reg_writeFranky Lin
The size parameter for brcmf_sdcard_reg_write is always 4. Remove it to make the code cleaner. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15brcmfmac: remove unused parameter of brcmf_sdcard_reg_readFranky Lin
The size parameter for brcmf_sdcard_reg_read is always 4. Remove it to make the code neat. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15ath9k_hw: Fix RTT calibrationSujith Manoharan
This patch fixes multiple issues with the current RTT implementation in ath9k. * The data that is obtained from the RTT interface registers are stored in 31:5 - mask out the extra bits when reading them. * A history buffer is maintained which is not needed at all. Remove this array and just store the baseband data for each chain (or bank). * A 'num_readings' variable was being used to handle the last entry. But it was being used in an improper manner, with the result that the RTT values were never being written to the RTT Interface registers. Fix this by using a simple flag. * Stop baseband operations before programming the calibration values to the HW. * Do not restore RX gain settings as part of RTT. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15iwlwifi: don't disable AGG queues that are not enabledEmmanuel Grumbach
If the BA session is torn down before we had a chance to start it we shouldn't disable the AGG tx queues that weren't enabled. This can happen in two cases: 1) We get a delBA before we drained our Tx queues in agg start flow 2) We didn't get the (successfull) addBA response on time Reported-by: Daniel Chyan <dchyan@princeton.edu> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15iwlwifi: don't flood logs when HT debug flag is setEmmanuel Grumbach
We have TX_REPLY for that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15iwlwifi: fix power index handlingAmit Beka
The power index that the user gives as module parameter in in range 1-5, but we need to decrease it in order to create an array index out of it (0-4) for the power table command. Signed-off-by: Amit Beka <amit.beka@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15iwlwifi: make sure reduced tx power bit is validWey-Yi Guy
Once driver decide to change reduced tx power behavior, make sure the reduce tx power valid bit is set Change-Id: I3afae96319292d8cb347a812a948085c5db7ad91 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Reviewed-on: http://git-mwg.jer.intel.com/gerrit/1948 Tested-by: Jenkins Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-15iwlwifi: add documentation for bt reduced tx powerWey-Yi Guy
Change-Id: Ia6294d651dcffdcaf8b62e67bcef52bd8c158dea Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Reviewed-on: http://git-mwg.jer.intel.com/gerrit/1947 Tested-by: Jenkins Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-03-31 04:18:26 +0000