| Age | Commit message (Collapse) | Author |
|---|
|
Synces the DMA buffer properly in order for CPU and device to see
the most up-to-data data.
Signed-off-by: Yangchun Fu <yangchun@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2019-11-01
This series contains updates to e1000, igb, igc, ixgbe, i40e and driver
documentation.
Lyude Paul fixes an issue where a fatal read error occurs when the
device is unplugged from the machine. So change the read error into a
warn while the device is still present.
Manfred Rudigier found that the i350 device was not apart of the "Media
Auto Sense" feature, yet the device supports it. So add the missing
i350 device to the check and fix an issue where the media auto sense
would flip/flop when no cable was connected to the port causing spurious
kernel log messages.
I fixed an issue where the fix to resolve receive buffer starvation was
applied in more than one place in the driver, one being the incorrect
location in the i40e driver.
Wenwen Wang fixes a potential memory leak in e1000 where allocated
memory is not properly cleaned up in one of the error paths.
Jonathan Neuschäfer cleans up the driver documentation to be consistent
and remove the footnote reference, since the footnote no longer exists in
the documentation.
Igor Pylypiv cleans up a duplicate clearing of a bit, no need to clear
it twice.
v2: Fixed alignment issue in patch 3 of the series based on community
feedback.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__IXGBE_RX_BUILD_SKB_ENABLED bit is already cleared.
Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
In e1000_set_ringparam(), 'tx_old' and 'rx_old' are not deallocated if
e1000_up() fails, leading to memory leaks. Refactor the code to fix this
issue.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Magnus's fix to resolve a potential receive buffer starvation for AF_XDP
got applied to both the i40e_xsk_umem_enable/disable() functions, when it
should have only been applied to the "enable". So clean up the undesired
code in the disable function.
CC: Magnus Karlsson <magnus.karlsson@intel.com>
Fixes: 1f459bdc2007 ("i40e: fix potential RX buffer starvation for AF_XDP")
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
|
|
At least on the i350 there is an annoying behavior that is maybe also
present on 82580 devices, but was probably not noticed yet as MAS is not
widely used.
If no cable is connected on both fiber/copper ports the media auto sense
code will constantly swap between them as part of the watchdog task and
produce many unnecessary kernel log messages.
The swap code responsible for this behavior (switching to fiber) should
not be executed if the current media type is copper and there is no signal
detected on the fiber port. In this case we can safely wait until the
AUTOSENSE_EN bit is cleared.
Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 5.4
Third set of fixes for 5.4. Most of them are for iwlwifi but important
fixes also for rtlwifi and mt76, the overflow fix for rtlwifi being
most important.
iwlwifi
* fix merge damage on earlier patch
* various fixes to device id handling
* fix scan config command handling which caused firmware asserts
rtlwifi
* fix overflow on P2P IE handling
* don't deliver too small frames to mac80211
mt76
* disable PCIE_ASPM
* fix buffer DMA unmap on certain cases
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The remove misses to disable and unprepare priv->macclk like what is done
when probe fails.
Add the missed call in remove.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch enables the hardware feature "Media Auto Sense" also on the
i350. It works in the same way as on the 82850 devices. Hardware designs
using dual PHYs (fiber/copper) can enable this feature by setting the MAS
enable bits in the NVM_COMPAT register (0x03) in the EEPROM.
Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Fatal read errors are worth warning about, unless of course the device
was just unplugged from the machine - something that's a rather normal
occurrence when the igb/igc adapter is located on a Thunderbolt dock. So,
let's only WARN() if there's a fatal read error while the device is
still present.
This fixes the following WARN splat that's been appearing whenever I
unplug my Caldigit TS3 Thunderbolt dock from my laptop:
igb 0000:09:00.0 enp9s0: PCIe link lost
------------[ cut here ]------------
igb: Failed to read reg 0x18!
WARNING: CPU: 7 PID: 516 at
drivers/net/ethernet/intel/igb/igb_main.c:756 igb_rd32+0x57/0x6a [igb]
Modules linked in: igb dca thunderbolt fuse vfat fat elan_i2c mei_wdt
mei_hdcp i915 wmi_bmof intel_wmi_thunderbolt iTCO_wdt
iTCO_vendor_support x86_pkg_temp_thermal intel_powerclamp joydev
coretemp crct10dif_pclmul crc32_pclmul i2c_algo_bit ghash_clmulni_intel
intel_cstate drm_kms_helper intel_uncore syscopyarea sysfillrect
sysimgblt fb_sys_fops intel_rapl_perf intel_xhci_usb_role_switch mei_me
drm roles idma64 i2c_i801 ucsi_acpi typec_ucsi mei intel_lpss_pci
processor_thermal_device typec intel_pch_thermal intel_soc_dts_iosf
intel_lpss int3403_thermal thinkpad_acpi wmi int340x_thermal_zone
ledtrig_audio int3400_thermal acpi_thermal_rel acpi_pad video
pcc_cpufreq ip_tables serio_raw nvme nvme_core crc32c_intel uas
usb_storage e1000e i2c_dev
CPU: 7 PID: 516 Comm: kworker/u16:3 Not tainted 5.2.0-rc1Lyude-Test+ #14
Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:igb_rd32+0x57/0x6a [igb]
Code: 87 b8 fc ff ff 48 c7 47 08 00 00 00 00 48 c7 c6 33 42 9b c0 4c 89
c7 e8 47 45 cd dc 89 ee 48 c7 c7 43 42 9b c0 e8 c1 94 71 dc <0f> 0b eb
08 8b 00 ff c0 75 b0 eb c8 44 89 e0 5d 41 5c c3 0f 1f 44
RSP: 0018:ffffba5801cf7c48 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff9e7956608840 RCX: 0000000000000007
RDX: 0000000000000000 RSI: ffffba5801cf7b24 RDI: ffff9e795e3d6a00
RBP: 0000000000000018 R08: 000000009dec4a01 R09: ffffffff9e61018f
R10: 0000000000000000 R11: ffffba5801cf7ae5 R12: 00000000ffffffff
R13: ffff9e7956608840 R14: ffff9e795a6f10b0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff9e795e3c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000564317bc4088 CR3: 000000010e00a006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
igb_release_hw_control+0x1a/0x30 [igb]
igb_remove+0xc5/0x14b [igb]
pci_device_remove+0x3b/0x93
device_release_driver_internal+0xd7/0x17e
pci_stop_bus_device+0x36/0x75
pci_stop_bus_device+0x66/0x75
pci_stop_bus_device+0x66/0x75
pci_stop_and_remove_bus_device+0xf/0x19
trim_stale_devices+0xc5/0x13a
? __pm_runtime_resume+0x6e/0x7b
trim_stale_devices+0x103/0x13a
? __pm_runtime_resume+0x6e/0x7b
trim_stale_devices+0x103/0x13a
acpiphp_check_bridge+0xd8/0xf5
acpiphp_hotplug_notify+0xf7/0x14b
? acpiphp_check_bridge+0xf5/0xf5
acpi_device_hotplug+0x357/0x3b5
acpi_hotplug_work_fn+0x1a/0x23
process_one_work+0x1a7/0x296
worker_thread+0x1a8/0x24c
? process_scheduled_works+0x2c/0x2c
kthread+0xe9/0xee
? kthread_destroy_worker+0x41/0x41
ret_from_fork+0x35/0x40
---[ end trace 252bf10352c63d22 ]---
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 47e16692b26b ("igb/igc: warn when fatal read failure happens")
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Acked-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Commit da58f90f11f5 ("netdevsim: Add devlink-trap support") added
delayed work to netdevsim that periodically iterates over the registered
netdevsim ports and reports various packet traps via devlink.
While the delayed work takes the 'port_list_lock' mutex to protect
against concurrent addition / deletion of ports, during device creation
/ dismantle ports are added / deleted without this lock, which can
result in a use-after-free [1].
Fix this by making sure that the ports list is always modified under the
lock.
[1]
[ 59.205543] ==================================================================
[ 59.207748] BUG: KASAN: use-after-free in nsim_dev_trap_report_work+0xa67/0xad0
[ 59.210247] Read of size 8 at addr ffff8883cbdd3398 by task kworker/3:1/38
[ 59.212584]
[ 59.213148] CPU: 3 PID: 38 Comm: kworker/3:1 Not tainted 5.4.0-rc3-custom-16119-ge6abb5f0261e #2013
[ 59.215896] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014
[ 59.218384] Workqueue: events nsim_dev_trap_report_work
[ 59.219428] Call Trace:
[ 59.219924] dump_stack+0xa9/0x10e
[ 59.220623] print_address_description.constprop.4+0x21/0x340
[ 59.221976] ? vprintk_func+0x66/0x240
[ 59.222752] __kasan_report.cold.8+0x78/0x91
[ 59.223602] ? nsim_dev_trap_report_work+0xa67/0xad0
[ 59.224603] kasan_report+0xe/0x20
[ 59.225296] nsim_dev_trap_report_work+0xa67/0xad0
[ 59.226435] ? rcu_read_lock_sched_held+0xaf/0xe0
[ 59.227512] ? trace_event_raw_event_rcu_quiescent_state_report+0x360/0x360
[ 59.228851] process_one_work+0x98f/0x1760
[ 59.229684] ? pwq_dec_nr_in_flight+0x330/0x330
[ 59.230656] worker_thread+0x91/0xc40
[ 59.231587] ? process_one_work+0x1760/0x1760
[ 59.232451] kthread+0x34a/0x410
[ 59.233104] ? __kthread_queue_delayed_work+0x240/0x240
[ 59.234141] ret_from_fork+0x3a/0x50
[ 59.234982]
[ 59.235371] Allocated by task 187:
[ 59.236189] save_stack+0x19/0x80
[ 59.236853] __kasan_kmalloc.constprop.5+0xc1/0xd0
[ 59.237822] kmem_cache_alloc_trace+0x14c/0x380
[ 59.238769] __nsim_dev_port_add+0xaf/0x5c0
[ 59.239627] nsim_dev_probe+0x4fc/0x1140
[ 59.240550] really_probe+0x264/0xc00
[ 59.241418] driver_probe_device+0x208/0x2e0
[ 59.242255] __device_attach_driver+0x215/0x2d0
[ 59.243150] bus_for_each_drv+0x154/0x1d0
[ 59.243944] __device_attach+0x1ba/0x2b0
[ 59.244923] bus_probe_device+0x1dd/0x290
[ 59.245805] device_add+0xbac/0x1550
[ 59.246528] new_device_store+0x1f4/0x400
[ 59.247306] bus_attr_store+0x7b/0xa0
[ 59.248047] sysfs_kf_write+0x10f/0x170
[ 59.248941] kernfs_fop_write+0x283/0x430
[ 59.249843] __vfs_write+0x81/0x100
[ 59.250546] vfs_write+0x1ce/0x510
[ 59.251190] ksys_write+0x104/0x200
[ 59.251873] do_syscall_64+0xa4/0x4e0
[ 59.252642] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 59.253837]
[ 59.254203] Freed by task 187:
[ 59.254811] save_stack+0x19/0x80
[ 59.255463] __kasan_slab_free+0x125/0x170
[ 59.256265] kfree+0x100/0x440
[ 59.256870] nsim_dev_remove+0x98/0x100
[ 59.257651] nsim_bus_remove+0x16/0x20
[ 59.258382] device_release_driver_internal+0x20b/0x4d0
[ 59.259588] bus_remove_device+0x2e9/0x5a0
[ 59.260551] device_del+0x410/0xad0
[ 59.263777] device_unregister+0x26/0xc0
[ 59.264616] nsim_bus_dev_del+0x16/0x60
[ 59.265381] del_device_store+0x2d6/0x3c0
[ 59.266295] bus_attr_store+0x7b/0xa0
[ 59.267192] sysfs_kf_write+0x10f/0x170
[ 59.267960] kernfs_fop_write+0x283/0x430
[ 59.268800] __vfs_write+0x81/0x100
[ 59.269551] vfs_write+0x1ce/0x510
[ 59.270252] ksys_write+0x104/0x200
[ 59.270910] do_syscall_64+0xa4/0x4e0
[ 59.271680] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 59.272812]
[ 59.273211] The buggy address belongs to the object at ffff8883cbdd3200
[ 59.273211] which belongs to the cache kmalloc-512 of size 512
[ 59.275838] The buggy address is located 408 bytes inside of
[ 59.275838] 512-byte region [ffff8883cbdd3200, ffff8883cbdd3400)
[ 59.278151] The buggy address belongs to the page:
[ 59.279215] page:ffffea000f2f7400 refcount:1 mapcount:0 mapping:ffff8883ecc0ce00 index:0x0 compound_mapcount: 0
[ 59.281449] flags: 0x200000000010200(slab|head)
[ 59.282356] raw: 0200000000010200 ffffea000f2f3a08 ffffea000f2fd608 ffff8883ecc0ce00
[ 59.283949] raw: 0000000000000000 0000000000150015 00000001ffffffff 0000000000000000
[ 59.285608] page dumped because: kasan: bad access detected
[ 59.286981]
[ 59.287337] Memory state around the buggy address:
[ 59.288310] ffff8883cbdd3280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 59.289763] ffff8883cbdd3300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 59.291452] >ffff8883cbdd3380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 59.292945] ^
[ 59.293815] ffff8883cbdd3400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 59.295220] ffff8883cbdd3480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 59.296872] ==================================================================
Fixes: da58f90f11f5 ("netdevsim: Add devlink-trap support")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: syzbot+9ed8f68ab30761f3678e@syzkaller.appspotmail.com
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If rndis_filter_open() fails, we need to remove the rndis device created
in earlier steps, before returning an error code. Otherwise, the retry of
netvsc_attach() from its callers will fail and hang.
Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When an error is returned by rndis_filter_set_offload_params(), we should
still assign the unaffected features to ndev->features. Otherwise, these
features will be missing.
Fixes: d6792a5a0747 ("hv_netvsc: Add handler for LRO setting change")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Release resources when attaching to ULD fail. Otherwise, data
mismatch is seen between LLD and ULD later on, which lead to
kernel panic when accessing resources that should not even
exist in the first place.
Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD")
Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The devlink parameter "acl_region_rehash_interval" is a runtime
parameter whose value is stored in a dynamically allocated memory. While
reloading the driver, this memory is freed and then allocated again. A
use-after-free might happen if during this time frame someone tries to
retrieve its value.
Since commit 070c63f20f6c ("net: devlink: allow to change namespaces
during reload") the use-after-free can be reliably triggered when
reloading the driver into a namespace, as after freeing the memory (via
reload_down() callback) all the parameters are notified.
Fix this by unpublishing and then re-publishing the parameters during
reload.
Fixes: 98bbf70c1c41 ("mlxsw: spectrum: add "acl_region_rehash_interval" devlink param")
Fixes: 7c62cfb8c574 ("devlink: publish params only after driver init is done")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Current implementation for nvm_attr configuration instructs the management
FW to load/unload the nvm-cfg image for each user-provided attribute in
the input file. This consumes lot of cycles even for few tens of
attributes.
This patch updates the implementation to perform load/commit of the config
for every 50 attributes. After loading the nvm-image, MFW expects that
config should be committed in a predefined timer value (5 sec), hence it's
not possible to write large number of attributes in a single load/commit
window. Hence performing the commits in chunks.
Fixes: 0dabbe1bb3a4 ("qed: Add driver API for flashing the config attributes.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit 0ce1822c2a08 ("vxlan: add adjacent link to limit depth
level"), vxlan_changelink() could fail because of
netdev_adjacent_change_prepare().
netdev_adjacent_change_prepare() returns -EEXIST when old lower device
and new lower device are same.
(old lower device is "dst->remote_dev" and new lower device is "lowerdev")
So, before calling it, lowerdev should be NULL if these devices are same.
Test command1:
ip link add dummy0 type dummy
ip link add vxlan0 type vxlan dev dummy0 dstport 4789 vni 1
ip link set vxlan0 type vxlan ttl 5
RTNETLINK answers: File exists
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a spelling misake in a DP_NOTICE message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The API was reduced to include only knowledge currently needed by the
FW scan logic, the rest is legacy. Support the new, reduced version.
Using the old API with newer firmwares (starting from
iwlwifi-*-50.ucode, which implements and requires the new API version)
causes an assertion failure similar to this one:
[ 2.854505] iwlwifi 0000:00:14.3: 0x20000038 | BAD_COMMAND
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
mt76 dma layer is supposed to unmap skb data buffers while keep txwi
mapped on hw dma ring. At the moment mt76 wrongly unmap txwi or does
not unmap data fragments in even positions for non-linear skbs. This
issue may result in hw hangs with A-MSDU if the system relies on IOMMU
or SWIOTLB. Fix this behaviour properly unmapping data fragments on
non-linear skbs.
Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
On same device (e.g. U7612E-H1) PCIE_ASPM causes continuous mcu hangs and
instability. Since mt76x2 series does not manage PCIE PS states, first we
try to disable ASPM using pci_disable_link_state. If it fails, we will
disable PCIE PS configuring PCI registers.
This patch has been successfully tested on U7612E-H1 mini-pice card
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2019-10-24
This series introduces misc fixes to mlx5 driver.
v1->v2:
- Dropped the kTLS counter documentation patch, Tariq will fix it and
send it later.
- Added a new fix for link speed mode reporting.
('net/mlx5e: Initialize link modes bitmap on stack')
For -stable v4.14
('net/mlx5e: Fix handling of compressed CQEs in case of low NAPI budget')
For -stable v4.19
('net/mlx5e: Fix ethtool self test: link speed')
For -stable v5.2
('net/mlx5: Fix flow counter list auto bits struct')
('net/mlx5: Fix rtable reference leak')
For -stable v5.3
('net/mlx5e: Remove incorrect match criteria assignment line')
('net/mlx5e: Determine source port properly for vlan push action')
('net/mlx5e: Initialize link modes bitmap on stack')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a bonding interface is being created, it setups its mode and options.
At that moment, it uses mode_lock so mode_lock should be initialized
before that moment.
rtnl_newlink()
rtnl_create_link()
alloc_netdev_mqs()
->setup() //bond_setup()
->newlink //bond_newlink
bond_changelink()
register_netdevice()
->ndo_init() //bond_init()
After commit 089bca2caed0 ("bonding: use dynamic lockdep key instead of
subclass"), mode_lock is initialized in bond_init().
So in the bond_changelink(), un-initialized mode_lock can be used.
mode_lock should be initialized in bond_setup().
This patch partially reverts commit 089bca2caed0 ("bonding: use dynamic
lockdep key instead of subclass")
Test command:
ip link add bond0 type bond mode 802.3ad lacp_rate 0
Splat looks like:
[ 60.615127] INFO: trying to register non-static key.
[ 60.615900] the code is fine but needs lockdep annotation.
[ 60.616697] turning off the locking correctness validator.
[ 60.617490] CPU: 1 PID: 957 Comm: ip Not tainted 5.4.0-rc3+ #109
[ 60.618350] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 60.619481] Call Trace:
[ 60.619918] dump_stack+0x7c/0xbb
[ 60.620453] register_lock_class+0x1215/0x14d0
[ 60.621131] ? alloc_netdev_mqs+0x7b3/0xcc0
[ 60.621771] ? is_bpf_text_address+0x86/0xf0
[ 60.622416] ? is_dynamic_key+0x230/0x230
[ 60.623032] ? unwind_get_return_address+0x5f/0xa0
[ 60.623757] ? create_prof_cpu_mask+0x20/0x20
[ 60.624408] ? arch_stack_walk+0x83/0xb0
[ 60.625023] __lock_acquire+0xd8/0x3de0
[ 60.625616] ? stack_trace_save+0x82/0xb0
[ 60.626225] ? stack_trace_consume_entry+0x160/0x160
[ 60.626957] ? deactivate_slab.isra.80+0x2c5/0x800
[ 60.627668] ? register_lock_class+0x14d0/0x14d0
[ 60.628380] ? alloc_netdev_mqs+0x7b3/0xcc0
[ 60.629020] ? save_stack+0x69/0x80
[ 60.629574] ? save_stack+0x19/0x80
[ 60.630121] ? __kasan_kmalloc.constprop.4+0xa0/0xd0
[ 60.630859] ? __kmalloc_node+0x16f/0x480
[ 60.631472] ? alloc_netdev_mqs+0x7b3/0xcc0
[ 60.632121] ? rtnl_create_link+0x2ed/0xad0
[ 60.634388] ? __rtnl_newlink+0xad4/0x11b0
[ 60.635024] lock_acquire+0x164/0x3b0
[ 60.635608] ? bond_3ad_update_lacp_rate+0x91/0x200 [bonding]
[ 60.636463] _raw_spin_lock_bh+0x38/0x70
[ 60.637084] ? bond_3ad_update_lacp_rate+0x91/0x200 [bonding]
[ 60.637930] bond_3ad_update_lacp_rate+0x91/0x200 [bonding]
[ 60.638753] ? bond_3ad_lacpdu_recv+0xb30/0xb30 [bonding]
[ 60.639552] ? bond_opt_get_val+0x180/0x180 [bonding]
[ 60.640307] ? ___slab_alloc+0x5aa/0x610
[ 60.640925] bond_option_lacp_rate_set+0x71/0x140 [bonding]
[ 60.641751] __bond_opt_set+0x1ff/0xbb0 [bonding]
[ 60.643217] ? kasan_unpoison_shadow+0x30/0x40
[ 60.643924] bond_changelink+0x9a4/0x1700 [bonding]
[ 60.644653] ? memset+0x1f/0x40
[ 60.742941] ? bond_slave_changelink+0x1a0/0x1a0 [bonding]
[ 60.752694] ? alloc_netdev_mqs+0x8ea/0xcc0
[ 60.753330] ? rtnl_create_link+0x2ed/0xad0
[ 60.753964] bond_newlink+0x1e/0x60 [bonding]
[ 60.754612] __rtnl_newlink+0xb9f/0x11b0
[ ... ]
Reported-by: syzbot+8da67f407bcba2c72e6e@syzkaller.appspotmail.com
Reported-by: syzbot+0d083911ab18b710da71@syzkaller.appspotmail.com
Fixes: 089bca2caed0 ("bonding: use dynamic lockdep key instead of subclass")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use platform_get_irq_byname_optional() and platform_get_irq_optional()
instead of platform_get_irq_byname() and platform_get_irq() for optional
IRQs to avoid below error message during probe:
[ 0.795803] fec 30be0000.ethernet: IRQ pps not found
[ 0.800787] fec 30be0000.ethernet: IRQ index 3 not found
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Failed to get irq using name is NOT fatal as driver will use index
to get irq instead, use platform_get_irq_byname_optional() instead
of platform_get_irq_byname() to avoid below error message during
probe:
[ 0.819312] fec 30be0000.ethernet: IRQ int0 not found
[ 0.824433] fec 30be0000.ethernet: IRQ int1 not found
[ 0.829539] fec 30be0000.ethernet: IRQ int2 not found
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is to improve the tun_info options_len by dropping
the skb when TUNNEL_VXLAN_OPT is set but options_len is less
than vxlan_metadata. This can void a potential out-of-bounds
access on ip_tun_info.
Fixes: ee122c79d422 ("vxlan: Flow based tunneling")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is due to error in over budget processing.
When dealing with high throughput, the used buffers
that exceeds the budget is not cleaned up. In addition,
it takes a lot of cycles to clean up the used buffer,
and then the buffer where the valid data is located can take effect.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prior to this patch, the amount of counters guaranteed per VF in the
resource tracker was MLX4_VF_COUNTERS_PER_PORT * MLX4_MAX_PORTS. It was
set regardless if the VF was single or dual port.
This caused several VFs to have no guaranteed counters although the
system could satisfy their request.
The fix is to dynamically guarantee counters, based on each VF
specification.
Fixes: 9de92c60beaa ("net/mlx4_core: Adjust counter grant policy in the resource tracker")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Initialize link modes bitmap on stack before using it, otherwise the
outcome of ethtool set link ksettings might have unexpected values.
Fixes: 4b95840a6ced ("net/mlx5e: Fix matching of speed to PRM link modes")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Ethtool self test contains a test for link speed. This test reads the
PTYS register and determines whether the current speed is valid or not.
Change current implementation to use the function mlx5e_port_linkspeed()
that does the same check and fails when speed is invalid. This code
redundancy lead to a bug when mlx5e_port_linkspeed() was updated with
expended speeds and the self test was not.
Fixes: 2c81bfd5ae56 ("net/mlx5e: Move port speed code from en_ethtool.c to en/port.c")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When CQE compression is enabled, compressed CQEs use the following
structure: a title is followed by one or many blocks, each containing 8
mini CQEs (except the last, which may contain fewer mini CQEs).
Due to NAPI budget restriction, a complete structure is not always
parsed in one NAPI run, and some blocks with mini CQEs may be deferred
to the next NAPI poll call - we have the mlx5e_decompress_cqes_cont call
in the beginning of mlx5e_poll_rx_cq. However, if the budget is
extremely low, some blocks may be left even after that, but the code
that follows the mlx5e_decompress_cqes_cont call doesn't check it and
assumes that a new CQE begins, which may not be the case. In such cases,
random memory corruptions occur.
An extremely low NAPI budget of 8 is used when busy_poll or busy_read is
active.
This commit adds a check to make sure that the previous compressed CQE
has been completely parsed after mlx5e_decompress_cqes_cont, otherwise
it prevents a new CQE from being fetched in the middle of a compressed
CQE.
This commit fixes random crashes in __build_skb, __page_pool_put_page
and other not-related-directly places, that used to happen when both CQE
compression and busy_poll/busy_read were enabled.
Fixes: 7219ab34f184 ("net/mlx5e: CQE compression")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Geneve implementation changed mlx5 tc to user direct pointer to tunnel_key
action's internal struct ip_tunnel_info instance. However, this leads to
use-after-free error when initial filter that caused creation of new encap
entry is deleted or when tunnel_key action is manually overwritten through
action API. Moreover, with recent TC offloads API unlocking change struct
flow_action_entry->tunnel point to temporal copy of tunnel info that is
deallocated after filter is offloaded to hardware which causes bug to
reproduce every time new filter is attached to existing encap entry with
following KASAN bug:
[ 314.885555] ==================================================================
[ 314.886641] BUG: KASAN: use-after-free in memcmp+0x2c/0x60
[ 314.886864] Read of size 1 at addr ffff88886c746280 by task tc/2682
[ 314.887179] CPU: 22 PID: 2682 Comm: tc Not tainted 5.3.0-rc7+ #703
[ 314.887188] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[ 314.887195] Call Trace:
[ 314.887215] dump_stack+0x9a/0xf0
[ 314.887236] print_address_description+0x67/0x323
[ 314.887248] ? memcmp+0x2c/0x60
[ 314.887257] ? memcmp+0x2c/0x60
[ 314.887272] __kasan_report.cold+0x1a/0x3d
[ 314.887474] ? __mlx5e_tc_del_fdb_peer_flow+0x100/0x1b0 [mlx5_core]
[ 314.887484] ? memcmp+0x2c/0x60
[ 314.887509] kasan_report+0xe/0x12
[ 314.887521] memcmp+0x2c/0x60
[ 314.887662] mlx5e_tc_add_fdb_flow+0x51b/0xbe0 [mlx5_core]
[ 314.887838] ? mlx5e_encap_take+0x110/0x110 [mlx5_core]
[ 314.887902] ? lockdep_init_map+0x87/0x2c0
[ 314.887924] ? __init_waitqueue_head+0x4f/0x60
[ 314.888062] ? mlx5e_alloc_flow.isra.0+0x18c/0x1c0 [mlx5_core]
[ 314.888207] __mlx5e_add_fdb_flow+0x2d7/0x440 [mlx5_core]
[ 314.888359] ? mlx5e_tc_update_neigh_used_value+0x6f0/0x6f0 [mlx5_core]
[ 314.888374] ? match_held_lock+0x2e/0x240
[ 314.888537] mlx5e_configure_flower+0x830/0x16a0 [mlx5_core]
[ 314.888702] ? __mlx5e_add_fdb_flow+0x440/0x440 [mlx5_core]
[ 314.888713] ? down_read+0x118/0x2c0
[ 314.888728] ? down_read_killable+0x300/0x300
[ 314.888882] ? mlx5e_rep_get_ethtool_stats+0x180/0x180 [mlx5_core]
[ 314.888899] tc_setup_cb_add+0x127/0x270
[ 314.888937] fl_hw_replace_filter+0x2ac/0x380 [cls_flower]
[ 314.888976] ? fl_hw_destroy_filter+0x1b0/0x1b0 [cls_flower]
[ 314.888990] ? fl_change+0xbcf/0x27ef [cls_flower]
[ 314.889030] ? fl_change+0xa57/0x27ef [cls_flower]
[ 314.889069] fl_change+0x16bd/0x27ef [cls_flower]
[ 314.889135] ? __rhashtable_insert_fast.constprop.0+0xa00/0xa00 [cls_flower]
[ 314.889167] ? __radix_tree_lookup+0xa4/0x130
[ 314.889200] ? fl_get+0x169/0x240 [cls_flower]
[ 314.889218] ? fl_walk+0x230/0x230 [cls_flower]
[ 314.889249] tc_new_tfilter+0x5e1/0xd40
[ 314.889281] ? __rhashtable_insert_fast.constprop.0+0xa00/0xa00 [cls_flower]
[ 314.889309] ? tc_del_tfilter+0xa30/0xa30
[ 314.889335] ? __lock_acquire+0x5b5/0x2460
[ 314.889378] ? find_held_lock+0x85/0xa0
[ 314.889442] ? tc_del_tfilter+0xa30/0xa30
[ 314.889465] rtnetlink_rcv_msg+0x4ab/0x5f0
[ 314.889488] ? rtnl_dellink+0x490/0x490
[ 314.889518] ? lockdep_hardirqs_on+0x260/0x260
[ 314.889538] ? netlink_deliver_tap+0xab/0x5a0
[ 314.889550] ? match_held_lock+0x1b/0x240
[ 314.889575] netlink_rcv_skb+0xd0/0x200
[ 314.889588] ? rtnl_dellink+0x490/0x490
[ 314.889605] ? netlink_ack+0x440/0x440
[ 314.889635] ? netlink_deliver_tap+0x161/0x5a0
[ 314.889648] ? lock_downgrade+0x360/0x360
[ 314.889657] ? lock_acquire+0xe5/0x210
[ 314.889686] netlink_unicast+0x296/0x350
[ 314.889707] ? netlink_attachskb+0x390/0x390
[ 314.889726] ? _copy_from_iter_full+0xe0/0x3a0
[ 314.889738] ? __virt_addr_valid+0xbb/0x130
[ 314.889771] netlink_sendmsg+0x394/0x600
[ 314.889800] ? netlink_unicast+0x350/0x350
[ 314.889817] ? move_addr_to_kernel.part.0+0x90/0x90
[ 314.889852] ? netlink_unicast+0x350/0x350
[ 314.889872] sock_sendmsg+0x96/0xa0
[ 314.889891] ___sys_sendmsg+0x482/0x520
[ 314.889919] ? copy_msghdr_from_user+0x250/0x250
[ 314.889930] ? __fput+0x1fa/0x390
[ 314.889941] ? task_work_run+0xb7/0xf0
[ 314.889957] ? exit_to_usermode_loop+0x117/0x120
[ 314.889972] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 314.889982] ? do_syscall_64+0x74/0xe0
[ 314.889992] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 314.890012] ? mark_lock+0xac/0x9a0
[ 314.890028] ? __lock_acquire+0x5b5/0x2460
[ 314.890053] ? mark_lock+0xac/0x9a0
[ 314.890083] ? __lock_acquire+0x5b5/0x2460
[ 314.890112] ? match_held_lock+0x1b/0x240
[ 314.890144] ? __fget_light+0xa1/0xf0
[ 314.890166] ? sockfd_lookup_light+0x91/0xb0
[ 314.890187] __sys_sendmsg+0xba/0x130
[ 314.890201] ? __sys_sendmsg_sock+0xb0/0xb0
[ 314.890225] ? __blkcg_punt_bio_submit+0xd0/0xd0
[ 314.890264] ? lockdep_hardirqs_off+0xbe/0x100
[ 314.890274] ? mark_held_locks+0x24/0x90
[ 314.890286] ? do_syscall_64+0x1e/0xe0
[ 314.890308] do_syscall_64+0x74/0xe0
[ 314.890325] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 314.890336] RIP: 0033:0x7f00ca33d7b8
[ 314.890348] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 5
4
[ 314.890356] RSP: 002b:00007ffea2983928 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 314.890369] RAX: ffffffffffffffda RBX: 000000005d777d5b RCX: 00007f00ca33d7b8
[ 314.890377] RDX: 0000000000000000 RSI: 00007ffea2983990 RDI: 0000000000000003
[ 314.890384] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006
[ 314.890392] R10: 0000000000404eda R11: 0000000000000246 R12: 0000000000000001
[ 314.890400] R13: 000000000047f640 R14: 00007ffea2987b58 R15: 0000000000000021
[ 314.890529] Allocated by task 2687:
[ 314.890684] save_stack+0x1b/0x80
[ 314.890694] __kasan_kmalloc.constprop.0+0xc2/0xd0
[ 314.890705] __kmalloc_track_caller+0x102/0x340
[ 314.890721] kmemdup+0x1d/0x40
[ 314.890730] tc_setup_flow_action+0x731/0x2c27
[ 314.890743] fl_hw_replace_filter+0x23b/0x380 [cls_flower]
[ 314.890756] fl_change+0x16bd/0x27ef [cls_flower]
[ 314.890765] tc_new_tfilter+0x5e1/0xd40
[ 314.890776] rtnetlink_rcv_msg+0x4ab/0x5f0
[ 314.890786] netlink_rcv_skb+0xd0/0x200
[ 314.890796] netlink_unicast+0x296/0x350
[ 314.890805] netlink_sendmsg+0x394/0x600
[ 314.890815] sock_sendmsg+0x96/0xa0
[ 314.890825] ___sys_sendmsg+0x482/0x520
[ 314.890834] __sys_sendmsg+0xba/0x130
[ 314.890844] do_syscall_64+0x74/0xe0
[ 314.890854] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 314.890937] Freed by task 2687:
[ 314.891076] save_stack+0x1b/0x80
[ 314.891086] __kasan_slab_free+0x12c/0x170
[ 314.891095] kfree+0xeb/0x2f0
[ 314.891106] tc_cleanup_flow_action+0x69/0xa0
[ 314.891119] fl_hw_replace_filter+0x2c5/0x380 [cls_flower]
[ 314.891132] fl_change+0x16bd/0x27ef [cls_flower]
[ 314.891140] tc_new_tfilter+0x5e1/0xd40
[ 314.891151] rtnetlink_rcv_msg+0x4ab/0x5f0
[ 314.891161] netlink_rcv_skb+0xd0/0x200
[ 314.891170] netlink_unicast+0x296/0x350
[ 314.891180] netlink_sendmsg+0x394/0x600
[ 314.891190] sock_sendmsg+0x96/0xa0
[ 314.891200] ___sys_sendmsg+0x482/0x520
[ 314.891208] __sys_sendmsg+0xba/0x130
[ 314.891218] do_syscall_64+0x74/0xe0
[ 314.891228] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 314.891315] The buggy address belongs to the object at ffff88886c746280
which belongs to the cache kmalloc-96 of size 96
[ 314.891762] The buggy address is located 0 bytes inside of
96-byte region [ffff88886c746280, ffff88886c7462e0)
[ 314.892196] The buggy address belongs to the page:
[ 314.892387] page:ffffea0021b1d180 refcount:1 mapcount:0 mapping:ffff88835d00ef80 index:0x0
[ 314.892398] flags: 0x57ffffc0000200(slab)
[ 314.892413] raw: 0057ffffc0000200 ffffea00219e0340 0000000800000008 ffff88835d00ef80
[ 314.892423] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[ 314.892430] page dumped because: kasan: bad access detected
[ 314.892515] Memory state around the buggy address:
[ 314.892707] ffff88886c746180: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 314.892976] ffff88886c746200: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 314.893251] >ffff88886c746280: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 314.893522] ^
[ 314.893657] ffff88886c746300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 314.893924] ffff88886c746380: 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc
[ 314.894189] ==================================================================
Fix the issue by duplicating tunnel info into per-encap copy that is
deallocated with encap structure. Also, duplicate tunnel info in flow parse
attribute to support cases when flow might be attached asynchronously.
Fixes: 1f6da30697d0 ("net/mlx5e: Geneve, Keep tunnel info as pointer to the original struct")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The cited commit refactored the encap id into a struct pointed from the
destination.
Bug fix for the case there is no encap for one of the destinations.
Fixes: 2b688ea5efde ("net/mlx5: Add flow steering actions to fs_cmd shim layer")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
If the rt entry gateway family is not AF_INET for multipath device,
rtable reference is leaked.
Hence, fix it by releasing the reference.
Fixes: 5fb091e8130b ("net/mlx5e: Use hint to resolve route when in HW multipath mode")
Fixes: e32ee6c78efa ("net/mlx5e: Support tunnel encap over tagged Ethernet")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When encap entry initialization completes successfully e->compl_result is
set to positive value and not zero, like mlx5e_rep_update_flows() assumes
at the moment. Fix the conditional to only skip encap flows update when
e->compl_result < 0.
Fixes: 2a1f1768fa17 ("net/mlx5e: Refactor neigh update for concurrent execution")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Memory allocated by kvzalloc should be freed by kvfree.
Fixes: cef35af34d6d ("net/mlx5e: Add mlx5e HV VHCA stats agent")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Driver have function, which enable match criteria for misc parameters
in dependence of eswitch capabilities.
Fixes: 4f5d1beadc10 ("Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Termination tables are used for vlan push actions on uplink ports.
To support RoCE dual port the source port value was placed in a register.
Fix the code to use an API method returning the source port according to
the FW capabilities.
Fixes: 10caabdaad5a ("net/mlx5e: Use termination table for VLAN push actions")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The switch driver keeps a "vid" variable per port, which signifies _the_
VLAN ID that is stripped on that port's egress (aka the native VLAN on a
trunk port).
That is the way the hardware is designed (mostly). The port->vid is
programmed into REW:PORT:PORT_VLAN_CFG:PORT_VID and the rewriter is told
to send all traffic as tagged except the one having port->vid.
There exists a possibility of finer-grained egress untagging decisions:
using the VCAP IS1 engine, one rule can be added to match every
VLAN-tagged frame whose VLAN should be untagged, and set POP_CNT=1 as
action. However, the IS1 can hold at most 512 entries, and the VLANs are
in the order of 6 * 4096.
So the code is fine for now. But this sequence of commands:
$ bridge vlan add dev swp0 vid 1 pvid untagged
$ bridge vlan add dev swp0 vid 2 untagged
makes untagged and pvid-tagged traffic be sent out of swp0 as tagged
with VID 1, despite user's request.
Prevent that from happening. The user should temporarily remove the
existing untagged VLAN (1 in this case), add it back as tagged, and then
add the new untagged VLAN (2 in this case).
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Background information: the driver operates the hardware in a mode where
a single VLAN can be transmitted as untagged on a particular egress
port. That is the "native VLAN on trunk port" use case. Its value is
held in port->vid.
Consider the following command sequence (no network manager, all
interfaces are down, debugging prints added by me):
$ ip link add dev br0 type bridge vlan_filtering 1
$ ip link set dev swp0 master br0
Kernel code path during last command:
br_add_slave -> ocelot_netdevice_port_event (NETDEV_CHANGEUPPER):
[ 21.401901] ocelot_vlan_port_apply: port 0 vlan aware 0 pvid 0 vid 0
br_add_slave -> nbp_vlan_init -> switchdev_port_attr_set -> ocelot_port_attr_set (SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING):
[ 21.413335] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 0 vid 0
br_add_slave -> nbp_vlan_init -> nbp_vlan_add -> br_switchdev_port_vlan_add -> switchdev_port_obj_add -> ocelot_port_obj_add -> ocelot_vlan_vid_add
[ 21.667421] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 1 vid 1
So far so good. The bridge has replaced the driver's default pvid used
in standalone mode (0) with its own default_pvid (1). The port's vid
(native VLAN) has also changed from 0 to 1.
$ ip link set dev swp0 up
[ 31.722956] 8021q: adding VLAN 0 to HW filter on device swp0
do_setlink -> dev_change_flags -> vlan_vid_add -> ocelot_vlan_rx_add_vid -> ocelot_vlan_vid_add:
[ 31.728700] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 1 vid 0
The 8021q module uses the .ndo_vlan_rx_add_vid API on .ndo_open to make
ports be able to transmit and receive 802.1p-tagged traffic by default.
This API is supposed to offload a VLAN sub-interface, which for a switch
port means to add a VLAN that is not a pvid, and tagged on egress.
But the driver implementation of .ndo_vlan_rx_add_vid is wrong: it adds
back vid 0 as "egress untagged". Now back to the initial paragraph:
there is a single untagged VID that the driver keeps track of, and that
has just changed from 1 (the pvid) to 0. So this breaks the bridge
core's expectation, because it has changed vid 1 from untagged to
tagged, when what the user sees is.
$ bridge vlan
port vlan ids
swp0 1 PVID Egress Untagged
br0 1 PVID Egress Untagged
But curiously, instead of manifesting itself as "untagged and
pvid-tagged traffic gets sent as tagged on egress", the bug:
- is hidden when vlan_filtering=0
- manifests as dropped traffic when vlan_filtering=1, due to this setting:
if (port->vlan_aware && !port->vid)
/* If port is vlan-aware and tagged, drop untagged and priority
* tagged frames.
*/
val |= ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA |
ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA |
ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA;
which would have made sense if it weren't for this bug. The setting's
intention was "this is a trunk port with no native VLAN, so don't accept
untagged traffic". So the driver was never expecting to set VLAN 0 as
the value of the native VLAN, 0 was just encoding for "invalid".
So the fix is to not send 802.1p traffic as untagged, because that would
change the port's native vlan to 0, unbeknownst to the bridge, and
trigger unexpected code paths in the driver.
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the implementation of i2400m_op_rfkill_sw_toggle() the allocated
buffer for cmd should be released before returning. The
documentation for i2400m_msg_to_dev() says when it returns the buffer
can be reused. Meaning cmd should be released in either case. Move
kfree(cmd) before return to be reached by all execution paths.
Fixes: 2507e6ab7a9a ("wimax: i2400: fix memory leak")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When rmmod hip04_eth.ko, we can get the following warning:
Task track: rmmod(1623)>bash(1591)>login(1581)>init(1)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1623 at kernel/irq/manage.c:1557 __free_irq+0xa4/0x2ac()
Trying to free already-free IRQ 200
Modules linked in: ping(O) pramdisk(O) cpuinfo(O) rtos_snapshot(O) interrupt_ctrl(O) mtdblock mtd_blkdevrtfs nfs_acl nfs lockd grace sunrpc xt_tcpudp ipt_REJECT iptable_filter ip_tables x_tables nf_reject_ipv
CPU: 0 PID: 1623 Comm: rmmod Tainted: G O 4.4.193 #1
Hardware name: Hisilicon A15
[<c020b408>] (rtos_unwind_backtrace) from [<c0206624>] (show_stack+0x10/0x14)
[<c0206624>] (show_stack) from [<c03f2be4>] (dump_stack+0xa0/0xd8)
[<c03f2be4>] (dump_stack) from [<c021a780>] (warn_slowpath_common+0x84/0xb0)
[<c021a780>] (warn_slowpath_common) from [<c021a7e8>] (warn_slowpath_fmt+0x3c/0x68)
[<c021a7e8>] (warn_slowpath_fmt) from [<c026876c>] (__free_irq+0xa4/0x2ac)
[<c026876c>] (__free_irq) from [<c0268a14>] (free_irq+0x60/0x7c)
[<c0268a14>] (free_irq) from [<c0469e80>] (release_nodes+0x1c4/0x1ec)
[<c0469e80>] (release_nodes) from [<c0466924>] (__device_release_driver+0xa8/0x104)
[<c0466924>] (__device_release_driver) from [<c0466a80>] (driver_detach+0xd0/0xf8)
[<c0466a80>] (driver_detach) from [<c0465e18>] (bus_remove_driver+0x64/0x8c)
[<c0465e18>] (bus_remove_driver) from [<c02935b0>] (SyS_delete_module+0x198/0x1e0)
[<c02935b0>] (SyS_delete_module) from [<c0202ed0>] (__sys_trace_return+0x0/0x10)
---[ end trace bb25d6123d849b44 ]---
Currently "rmmod hip04_eth.ko" call free_irq more than once
as devres_release_all and hip04_remove both call free_irq.
This results in a 'Trying to free already-free IRQ' warning.
To solve the problem free_irq has been moved out of hip04_remove.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the highly unlikely event that we fail to allocate either of the
"/txrx" or "/control" workqueues, we should bail cleanly rather than
blindly march on with NULL queue pointer(s) installed in the
'fjes_adapter' instance.
Cc: "David S. Miller" <davem@davemloft.net>
Reported-by: Nicolas Waisman <nico@semmle.com>
Link: https://lore.kernel.org/lkml/CADJ_3a8WFrs5NouXNqS5WYe7rebFP+_A5CheeqAyD_p7DFJJcg@mail.gmail.com/
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
lan78xx_status() will run with interrupts enabled due to the change in
ed194d136769 ("usb: core: remove local_irq_save() around ->complete()
handler"). generic_handle_irq() expects to be run with IRQs disabled.
[ 4.886203] 000: irq 79 handler irq_default_primary_handler+0x0/0x8 enabled interrupts
[ 4.886243] 000: WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:152 __handle_irq_event_percpu+0x154/0x168
[ 4.896294] 000: Modules linked in:
[ 4.896301] 000: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.6 #39
[ 4.896310] 000: Hardware name: Raspberry Pi 3 Model B+ (DT)
[ 4.896315] 000: pstate: 60000005 (nZCv daif -PAN -UAO)
[ 4.896321] 000: pc : __handle_irq_event_percpu+0x154/0x168
[ 4.896331] 000: lr : __handle_irq_event_percpu+0x154/0x168
[ 4.896339] 000: sp : ffff000010003cc0
[ 4.896346] 000: x29: ffff000010003cc0 x28: 0000000000000060
[ 4.896355] 000: x27: ffff000011021980 x26: ffff00001189c72b
[ 4.896364] 000: x25: ffff000011702bc0 x24: ffff800036d6e400
[ 4.896373] 000: x23: 000000000000004f x22: ffff000010003d64
[ 4.896381] 000: x21: 0000000000000000 x20: 0000000000000002
[ 4.896390] 000: x19: ffff8000371c8480 x18: 0000000000000060
[ 4.896398] 000: x17: 0000000000000000 x16: 00000000000000eb
[ 4.896406] 000: x15: ffff000011712d18 x14: 7265746e69206465
[ 4.896414] 000: x13: ffff000010003ba0 x12: ffff000011712df0
[ 4.896422] 000: x11: 0000000000000001 x10: ffff000011712e08
[ 4.896430] 000: x9 : 0000000000000001 x8 : 000000000003c920
[ 4.896437] 000: x7 : ffff0000118cc410 x6 : ffff0000118c7f00
[ 4.896445] 000: x5 : 000000000003c920 x4 : 0000000000004510
[ 4.896453] 000: x3 : ffff000011712dc8 x2 : 0000000000000000
[ 4.896461] 000: x1 : 73a3f67df94c1500 x0 : 0000000000000000
[ 4.896466] 000: Call trace:
[ 4.896471] 000: __handle_irq_event_percpu+0x154/0x168
[ 4.896481] 000: handle_irq_event_percpu+0x50/0xb0
[ 4.896489] 000: handle_irq_event+0x40/0x98
[ 4.896497] 000: handle_simple_irq+0xa4/0xf0
[ 4.896505] 000: generic_handle_irq+0x24/0x38
[ 4.896513] 000: intr_complete+0xb0/0xe0
[ 4.896525] 000: __usb_hcd_giveback_urb+0x58/0xd8
[ 4.896533] 000: usb_giveback_urb_bh+0xd0/0x170
[ 4.896539] 000: tasklet_action_common.isra.0+0x9c/0x128
[ 4.896549] 000: tasklet_hi_action+0x24/0x30
[ 4.896556] 000: __do_softirq+0x120/0x23c
[ 4.896564] 000: irq_exit+0xb8/0xd8
[ 4.896571] 000: __handle_domain_irq+0x64/0xb8
[ 4.896579] 000: bcm2836_arm_irqchip_handle_irq+0x60/0xc0
[ 4.896586] 000: el1_irq+0xb8/0x140
[ 4.896592] 000: arch_cpu_idle+0x10/0x18
[ 4.896601] 000: do_idle+0x200/0x280
[ 4.896608] 000: cpu_startup_entry+0x20/0x28
[ 4.896615] 000: rest_init+0xb4/0xc0
[ 4.896623] 000: arch_call_rest_init+0xc/0x14
[ 4.896632] 000: start_kernel+0x454/0x480
Fixes: ed194d136769 ("usb: core: remove local_irq_save() around ->complete() handler")
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stefan Wahren <wahrenst@gmx.net>
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An earlier bugfix introduced a dependency on CONFIG_NET_SCH_TAPRIO,
but this missed the case of NET_SCH_TAPRIO=m and NET_DSA_SJA1105=y,
which still causes a link error:
drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_setup_tc_taprio':
sja1105_tas.c:(.text+0x5c): undefined reference to `taprio_offload_free'
sja1105_tas.c:(.text+0x3b4): undefined reference to `taprio_offload_get'
drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_tas_teardown':
sja1105_tas.c:(.text+0x6ec): undefined reference to `taprio_offload_free'
Change the dependency to only allow selecting the TAS code when it
can link against the taprio code.
Fixes: a8d570de0cc6 ("net: dsa: sja1105: Add dependency for NET_DSA_SJA1105_TAS")
Fixes: 317ab5b86c8e ("net: dsa: sja1105: Configure the Time-Aware Scheduler via tc-taprio offload")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We are calling the checksum helper after the dma_map_single()
call to map the packet. This is incorrect as the checksumming
code will touch the packet from the CPU. This means the cache
won't be properly flushes (or the bounce buffering will leave
us with the unmodified packet to DMA).
This moves the calculation of the checksum & vlan tags to
before the DMA mapping.
This also has the side effect of fixing another bug: If the
checksum helper fails, we goto "drop" to drop the packet, which
will not unmap the DMA mapping.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Fixes: 05690d633f30 ("ftgmac100: Upgrade to NETIF_F_HW_CSUM")
Reviewed-by: Vijay Khemka <vijaykhemka@fb.com>
Tested-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch corrects the SPDX License Identifier style in
header files related to DPAA2 Ethernet driver supporting
Freescale SoCs with DPAA2. For C header files
Documentation/process/license-rules.rst mandates C-like comments
(opposed to C source files where C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For adapters which support the SGE Doorbell Queue Timer facility,
we configured the Ethernet TX Queues to send CIDX Updates to the
Associated Ethernet RX Response Queue with CPL_SGE_EGR_UPDATE
messages to allow us to respond more quickly to the CIDX Updates.
But, this was adding load to PCIe Link RX bandwidth and,
potentially, resulting in higher CPU Interrupt load.
This patch requests the HW to deliver the CIDX updates to the TX
queue status page rather than generating an ingress queue message
(as an interrupt). With this patch, the load on RX bandwidth is
reduced and a substantial improvement in BW is noticed at lower
IO sizes.
Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer")
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch corrects the SPDX License Identifier style in
header file related to ethernet driver for Cortina Gemini
devices. For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the CONFIG_MVNET_BA is not set, then make the stub functions
static inline to avoid trying to export them, and remove hte
following sparse warnings:
drivers/net/ethernet/marvell/mvneta_bm.h:163:6: warning: symbol 'mvneta_bm_pool_destroy' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:165:6: warning: symbol 'mvneta_bm_bufs_free' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:167:5: warning: symbol 'mvneta_bm_construct' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:168:5: warning: symbol 'mvneta_bm_pool_refill' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:170:23: warning: symbol 'mvneta_bm_pool_use' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:181:18: warning: symbol 'mvneta_bm_get' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:182:6: warning: symbol 'mvneta_bm_put' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
