summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2012-10-23net/cadence: get rid of HAVE_NET_MACBJoachim Eastwood
macb is a platform driver and there is nothing that prevents this driver from being built on non-ARM/AVR32 platforms. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23net/macb: fix truncate warningsJoachim Eastwood
When building macb on x86_64 the following warnings show up: drivers/net/ethernet/cadence/macb.c: In function macb_interrupt: drivers/net/ethernet/cadence/macb.c:556:4: warning: large integer implicitly truncated to unsigned type [-Woverflow] drivers/net/ethernet/cadence/macb.c: In function macb_reset_hw: drivers/net/ethernet/cadence/macb.c:792:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] drivers/net/ethernet/cadence/macb.c:793:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] drivers/net/ethernet/cadence/macb.c:796:2: warning: large integer implicitly truncated to unsigned type [-Woverflow] Use -1 insted of ~0UL, as done in other places in the driver, to silence these warnings. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21be2net: Update driver versionPadmanabh Ratnakar
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21be2net: Fix skyhawk VF PCI Device IDPadmanabh Ratnakar
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21be2net: Fix FW flashing on Skyhawk-RPadmanabh Ratnakar
FW flash layout on Skyhawk-R is different from BE3-R. Hence the code needs to be fixed to flash FW on Skyhawk-R. Also cleaning up code in BE3-R flashing function. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21be2net: Enabling Wake-on-LAN is not supported in S5 statePadmanabh Ratnakar
be_shutdown is enabling wake-on-lan by calling be_setup_wol. Emulex adapter do not support wake-on-lan in S5 state. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21be2net: Fix VF driver load on newer Lancer FWPadmanabh Ratnakar
PF driver should enable VF so that VF goes to ready state in new Lancer FW. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21be2net: Fix unnecessary delay in PCI EEHPadmanabh Ratnakar
During PCI EEH, driver waits for all functions in the card. Wait is needed only once per card. Fix is to wait only for the first PCI function. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21be2net: Fix issues in error recovery due to wrong queue statePadmanabh Ratnakar
During recovery from a FW error, destroy queue operation may fail. Queue should be marked as destroyed so that recovery code can recreate the queue. Also fix queue created state not getting checked at one instance. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21be2net: Fix ethtool get_settings output for VFPadmanabh Ratnakar
Return default values for fields for which VFs dont have privilege to get the required information from FW. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21be2net: Fix error messages while driver load for VFsPadmanabh Ratnakar
VF does not have privileges to execute many commands. When VFs try to execute those commands there are unnecessary error messages. Fix this by executing only those commands for which VF has privilege. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21be2net: Fix configuring VLAN for VF for LancerPadmanabh Ratnakar
Allow adding VLANs for Lancer VF. VLAN ID 0 should not be added to list of VLANs sent to FW. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21be2net: Wait till resources are available for VF in error recoveryPadmanabh Ratnakar
After FW error, driver should wait for NO_RESOURCE error to disappear before proceeding with recovery. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21be2net: Fix change MAC operation for VF for LancerPadmanabh Ratnakar
For changing MAC of VF from PF, delete MAC operation needs to be done before assigning new MAC. Also in ndo_set_mac_address operation avoid delete MAC if it has been already deleted by PF. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21be2net: Fix setting QoS for VF for LancerPadmanabh Ratnakar
Use Lancer specific command to set QoS for VF. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21be2net: Fix driver load failure for different FW configs in LancerPadmanabh Ratnakar
Driver assumes FW resource counts and capabilities while creating queues and using functionality like RSS. This causes driver load to fail in FW configs where resources and capabilities are reduced. Fix this by querying FW configuration during probe and using resources and capabilities accordingly. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-21hyperv: Remove unnecessary comments in rndis_filter_receive_data()Haiyang Zhang
Checked with Windows networking team, there is only one RNDIS message in each netvsc packet. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-19Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== This series contains updates to ixgbe and igb. Alexander Duyck (13): ixgbe: Initialize q_vector cpu and affinity masks correctly ixgbe: Enable jumbo frames support w/ SR-IOV ixgbe: Move message handling routines into their own functions ixgbe: Add mailbox API version negotiation support to ixgbe PF igb: Split Rx timestamping into two separate functions igb: Do not use header split, instead receive all frames into a single buffer igb: Combine post-processing of skb into a single function igb: Map entire page and sync half instead of mapping and unmapping half pages igb: Move rx_buffer related code in Rx cleanup path into separate function igb: Lock buffer size at 2K even on systems with larger pages igb: Combine q_vector and ring allocation into a single function igb: Move the calls to set the Tx and Rx queues into igb_open igb: Split igb_update_dca into separate Tx and Rx functions Tushar Dave (1): igb: Correcting and improving small packet check and padding ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-19net/at91_ether: convert to devm_* functionsJoachim Eastwood
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: clean up rx buffer handlingJoachim Eastwood
This patch does two things: * Use macb struct members and remove at91_ether ones * Alloc DMA buffers on netdev start and dealloc on stop Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: use macb dma description structJoachim Eastwood
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: share macb_set_rx_mode with macbJoachim Eastwood
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: use ethtool and mdio from macbJoachim Eastwood
This rips out the at91_ether phy handling and ethtool stuff and replace it with equivalent stuff from macb. The only thing lost is the phy irq support from at91_ether, but this can be added to macb and then benefit all users. Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: compile macb for exported functionsJoachim Eastwood
Comile macb as well as at91_ether to access exported functions. Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/macb: export some symbols for at91_etherJoachim Eastwood
Export some symbols to start sharing code between macb and at91_ether drivers. Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: use pclk member instead of ether_clkJoachim Eastwood
Remove old at91_priv member and use pclk member from macb. Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether/macb: absorb at91_private in to macb private structJoachim Eastwood
This will make it easier to share code between the drivers and eventually merge them into one driver. Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: use macb defs for rx dma buffersJoachim Eastwood
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: use macb access functionsJoachim Eastwood
Use macb read/write funtions and remove the old at91_ether ones. Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/at91_ether: use macb register definitionsJoachim Eastwood
Use register and bits definitions from the macb header. This makes it possible to have one header file for this hardware. Process was scripted and the resulting object file has the same checksum. Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19net/macb: add AT91RM9200 specific registers and bits to headerJoachim Eastwood
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
2012-10-19igb: Split igb_update_dca into separate Tx and Rx functionsAlexander Duyck
This change makes it so that igb_update_dca is broken into two halves, one for Rx and one for Tx. The advantage to this is primarily readability. In addition I am enabling relaxed ordering for reads from hardware since this is supported on all of the igb parts. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19igb: Move the calls to set the Tx and Rx queues into igb_openAlexander Duyck
This change helps to address locking issues seen with netif_set_real_num_tx_queues and netif_set_real_num_rx_queues when used in the igb_set_interrupt_capability function. To resolve these locking issues I have moved the two function calls into __igb_open so that they can be called while the RTNL lock is held. An added advantage to this is that the number of queues is not updated until the last possible moment so if there are any issues in allocating MSI-X interrupts or resources for the rings we have time to change the values prior to updating the netdev. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19igb: Combine q_vector and ring allocation into a single functionAlexander Duyck
This change combines the the allocation of q_vectors and rings into a single function. The advantage of this is that we are guaranteed we will avoid overlap in the L1 cache sets. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19igb: Lock buffer size at 2K even on systems with larger pagesAlexander Duyck
This change locks us in at 2K buffers even on a system that supports larger frames. The reason for this change is to make better use of pages and to reduce the overall truesize of frames generated by igb. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19igb: Move rx_buffer related code in Rx cleanup path into separate functionAlexander Duyck
In order to try and isolate things a bit further I am moving the code related to retrieving data from the rx_buffer_info structure into a separate function. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19igb: Map entire page and sync half instead of mapping and unmapping half pagesAlexander Duyck
This change makes it so that we map the entire page and just sync half of it for the device at a time. The advantage to this approach is that we can avoid the locking on map/unmap seen in many IOMMU implementations. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19igb: Combine post-processing of skb into a single functionAlexander Duyck
This change is meant to just clean-up a number of function calls that were made at the end of the Rx clean-up path by combining them into a single function call. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19igb: Do not use header split, instead receive all frames into a single bufferAlexander Duyck
This change makes it so that we no longer use header split. The idea is to reduce partial cache line writes by hardware when handling frames larger then header size. We can compensate for the extra overhead of having to memcpy the header buffer by avoiding the cache misses seen by leaving an full skb allocated and sitting on the ring. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19igb: Split Rx timestamping into two separate functionsAlexander Duyck
In order to support page based receive we will need to split up the two different types of timestamping into two separate functions. The first one will handle legacy timestamps with the value in the register, and the new one will handle timestamps in the Rx buffer itself. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19igb: Correcting and improving small packet check and paddingTushar Dave
Current implementation mess up the tail pointer. This patch sets skb->tail correctly. Also, the small packet check and padding is optimized by using unlikely and calling skb_pad directly. Signed-off-by: Tushar Dave <tushar.n.dave@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19ixgbe: Add mailbox API version negotiation support to ixgbe PFAlexander Duyck
This change allows us to add a mailbox versioning API. This will allow us to determine the features supported by the VFs from the PF. For example we will be implementing a version 1.1 API for the VF that will indicate that it can support us enabling Jumbo frames as the VF will support buffer chaining. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Robert Garrett <RobertX.Garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19ixgbe: Move message handling routines into their own functionsAlexander Duyck
Instead of trying to maintain one large monolithic function that handles most of the different messages from the VF it makes sense to break the message handling function up so that we can just go through one switch statement and call the correct routine for a given message. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19ixgbe: Enable jumbo frames support w/ SR-IOVAlexander Duyck
This change makes it so that we can have limited support for jumbo frames when SR-IOV is enabled. In order to accomplish this it is necessary to disable all VFs when the PF has jumbo frames enabled. If the VFs then request the same maximum frame size as the PF they will be re-enabled. A follow on patch will add a means of identifying when a VF can support spanning buffers and does not need to be worried about the actual supported max frame size. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Tested-by: Robert Garrett <robertx.e.garrett@intel.com> Tested-by: Sibai Li <Sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19ixgbe: Initialize q_vector cpu and affinity masks correctlyAlexander Duyck
When enabling DCB the rings belonging to a q_vector on CPU 0 were not reinitializing their DCA registers. Upon closer inspection the issue was that the q_vector CPU variable was left at 0 resulting in the driver not updating the DCA registers. In order to guarantee the DCA registers will be updated I am adding a couple line change so that we initialize the CPU variable to -1 which will force a DCA update the first time an interrupt fires on that q_vector. In addition we were setting the CPU affinity hint to all CPUs when we were not specifying a CPU. Instead we should leave it as all zeros to avoid any possible confusion about the fact that we shouldn't be giving a hint. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-18net: qmi_wwan: adding more ZTE devicesBjørn Mork
Analyzed a few Windows driver description files, supporting this long list of devices: %ztewwan.DeviceDesc0002% = ztewwan.ndi, USB\VID_19D2&PID_0002&MI_01 %ztewwan.DeviceDesc0012% = ztewwan.ndi, USB\VID_19D2&PID_0012&MI_01 %ztewwan.DeviceDesc0017% = ztewwan.ndi, USB\VID_19D2&PID_0017&MI_03 %ztewwan.DeviceDesc0021% = ztewwan.ndi, USB\VID_19D2&PID_0021&MI_04 %ztewwan.DeviceDesc0025% = ztewwan.ndi, USB\VID_19D2&PID_0025&MI_01 %ztewwan.DeviceDesc0031% = ztewwan.ndi, USB\VID_19D2&PID_0031&MI_04 %ztewwan.DeviceDesc0042% = ztewwan.ndi, USB\VID_19D2&PID_0042&MI_04 %ztewwan.DeviceDesc0049% = ztewwan.ndi, USB\VID_19D2&PID_0049&MI_05 %ztewwan.DeviceDesc0052% = ztewwan.ndi, USB\VID_19D2&PID_0052&MI_04 %ztewwan.DeviceDesc0055% = ztewwan.ndi, USB\VID_19D2&PID_0055&MI_01 %ztewwan.DeviceDesc0058% = ztewwan.ndi, USB\VID_19D2&PID_0058&MI_04 %ztewwan.DeviceDesc0063% = ztewwan.ndi, USB\VID_19D2&PID_0063&MI_04 %ztewwan.DeviceDesc2002% = ztewwan.ndi, USB\VID_19D2&PID_2002&MI_04 %ztewwan.DeviceDesc0104% = ztewwan.ndi, USB\VID_19D2&PID_0104&MI_04 %ztewwan.DeviceDesc0113% = ztewwan.ndi, USB\VID_19D2&PID_0113&MI_05 %ztewwan.DeviceDesc0118% = ztewwan.ndi, USB\VID_19D2&PID_0118&MI_05 %ztewwan.DeviceDesc0121% = ztewwan.ndi, USB\VID_19D2&PID_0121&MI_05 %ztewwan.DeviceDesc0123% = ztewwan.ndi, USB\VID_19D2&PID_0123&MI_04 %ztewwan.DeviceDesc0124% = ztewwan.ndi, USB\VID_19D2&PID_0124&MI_05 %ztewwan.DeviceDesc0125% = ztewwan.ndi, USB\VID_19D2&PID_0125&MI_06 %ztewwan.DeviceDesc0126% = ztewwan.ndi, USB\VID_19D2&PID_0126&MI_05 %ztewwan.DeviceDesc1008% = ztewwan.ndi, USB\VID_19D2&PID_1008&MI_04 %ztewwan.DeviceDesc1010% = ztewwan.ndi, USB\VID_19D2&PID_1010&MI_04 %ztewwan.DeviceDesc1012% = ztewwan.ndi, USB\VID_19D2&PID_1012&MI_04 %ztewwan.DeviceDesc1402% = ztewwan.ndi, USB\VID_19D2&PID_1402&MI_02 %ztewwan.DeviceDesc0157% = ztewwan.ndi, USB\VID_19D2&PID_0157&MI_05 %ztewwan.DeviceDesc0158% = ztewwan.ndi, USB\VID_19D2&PID_0158&MI_03 %ztewwan.DeviceDesc1401% = ztewwan.ndi, USB\VID_19D2&PID_1401&MI_02 %ztewwan.DeviceDesc0130% = ztewwan.ndi, USB\VID_19D2&PID_0130&MI_01 %ztewwan.DeviceDesc0133% = ztewwan.ndi, USB\VID_19D2&PID_0133&MI_03 %ztewwan.DeviceDesc0176% = ztewwan.ndi, USB\VID_19D2&PID_0176&MI_03 %ztewwan.DeviceDesc0178% = ztewwan.ndi, USB\VID_19D2&PID_0178&MI_03 %ztewwan.DeviceDesc0168% = ztewwan.ndi, USB\VID_19D2&PID_0168&MI_04 ;EuFi890 %ztewwan.DeviceDesc0191% = ztewwan.ndi, USB\VID_19D2&PID_0191&MI_04 ;AL621 %ztewwan.DeviceDesc0167% = ztewwan.ndi, USB\VID_19D2&PID_0167&MI_04 ;MF821 %ztewwan.DeviceDesc0199% = ztewwan.ndi, USB\VID_19D2&PID_0199&MI_01 %ztewwan.DeviceDesc0200% = ztewwan.ndi, USB\VID_19D2&PID_0200&MI_01 %ztewwan.DeviceDesc0257% = ztewwan.ndi, USB\VID_19D2&PID_0257&MI_03 ;MF821V %ztewwan.DeviceDesc1018% = ztewwan.ndi, USB\VID_19D2&PID_1018&MI_03 ;MF91 %ztewwan.DeviceDesc1426% = ztewwan.ndi, USB\VID_19D2&PID_1426&MI_02 ;0141 %ztewwan.DeviceDesc1247% = ztewwan.ndi, USB\VID_19D2&PID_1247&MI_04 %ztewwan.DeviceDesc1425% = ztewwan.ndi, USB\VID_19D2&PID_1425&MI_02 %ztewwan.DeviceDesc1424% = ztewwan.ndi, USB\VID_19D2&PID_1424&MI_02 %ztewwan.DeviceDesc1252% = ztewwan.ndi, USB\VID_19D2&PID_1252&MI_04 %ztewwan.DeviceDesc1254% = ztewwan.ndi, USB\VID_19D2&PID_1254&MI_04 %ztewwan.DeviceDesc1255A% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_03 %ztewwan.DeviceDesc1255B% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_04 %ztewwan.DeviceDesc1256% = ztewwan.ndi, USB\VID_19D2&PID_1256&MI_04 %ztewwan.DeviceDesc1245% = ztewwanCombB.ndi, USB\VID_19D2&PID_1245&MI_04 %ztewwan.DeviceDesc1021% = ztewwan.ndi, USB\VID_19D2&PID_1021&MI_02 Adding the ones we were missing. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18phy: add AT803x driverMatus Ujhelyi
This driver add support for wake over lan on AT803x phys. Signed-off-by: Matus Ujhelyi <ujhelyi.m@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18usb/ipheth: Add iPhone 5 supportJay Purohit
I noticed that the iPhone ethernet driver did not support iPhone 5. I quickly added support to it in my kernel, here's a patch. Signed-off-by: Jay Purohit <jspurohit@velocitylimitless.com> Acked-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Jan Ceuleers <jan.ceuleers@computer.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16bnx2x: fix handling mf storage modesDmitry Kravkov
Since commit a3348722 AFEX FCoE function is continuously reset. The patch prevents the resetting and removes debug print to stop garbaging syslog. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16vlan: fix bond/team enslave of vlan challenged slave/portJiri Pirko
In vlan_uses_dev() check for number of vlan devs rather than existence of vlan_info. The reason is that vlan id 0 is there without appropriate vlan dev on it by default which prevented from enslaving vlan challenged dev. Reported-by: Jon Stanley <jstanley@rmrf.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-06-02 00:10:53 +0000