summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-07-01net/mlx5e: Handle RQ flush in error casesDaniel Jurgens
Add a timeout to avoid an infinite loop waiting for RQ's to flush. This occurs during AER/EEH and will also happen if the device stops posting completions due to internal error or reset, or if moving the RQ to the error state fails. Also cleanup posted receive resources when closing the RQ. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5e: Implement ndo_tx_timeout callbackDaniel Jurgens
Add callback to handle TX timeouts. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5e: Timeout if SQ doesn't flush during closeDaniel Jurgens
Avoid an infinite loop by timing out waiting for the SQ to flush. Also clean up the TX descriptors if that happens. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5: Add timeout handle to commands with callbackMohamad Haj Yahia
The current implementation does not handle timeout in case of command with callback request, and this can lead to deadlock if the command doesn't get fw response. Add delayed callback timeout work before posting the command to fw. In case of real fw command completion we will cancel the delayed work. In case of fw command timeout the callback timeout handler will be called and it will simulate fw completion with timeout error. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5: Fix potential deadlock in command mode changeMohamad Haj Yahia
Call command completion handler in case of timeout when working in interrupts mode. Avoid flushing the commands workqueue after acquiring the semaphores to prevent a potential deadlock. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5: Fix wait_vital for VFs and remove fixed sleepDaniel Jurgens
The device ID for VFs is in a different location than PFs. This results in the poll always timing out for VFs. There's no good way to read the VF device ID without using the PF's configuration space. Switch to waiting for the health poll to start incrementing. Also remove the 1s sleep at the beginning. fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5: Fix incorrect page count when in internal errorDaniel Jurgens
Change page cleanup flow when in internal error to properly decrement the page counts when reclaiming pages. The prevents timing out waiting for extra pages that were actually cleaned up previously. fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5: Avoid calling sleeping function by the health poll threadMohamad Haj Yahia
In internal error state the health poll thread will eventually call synchronize_irq() (to safely trigger command completions) which might sleep, so we are calling sleeping function from atomic context which is invalid. Here we move trigger_cmd_completions(dev) to enter error state which is the earliest stage in error state handling. This way we won't need to wait for next health poll to trigger command completions and will solve the scheduling while atomic issue. mlx5_enter_error_state can be called from two contexts, protect it with dev->intf_state_lock Fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net/mlx5: Fix teardown errors that happen in pci error handlerMohamad Haj Yahia
In case of internal error state we will simulate the commands status through the return value translation function, but we need to simulate all the teardown fw commands as successful so we will not have fw command failure prints. This also fix memory leaks that happen because we skip teardown stages due to failed fw commands. Fixes: 89d44f0a6c73 ('net/mlx5_core: Add pci error handlers to mlx5_core driver') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01bonding: prevent out of bound accessesEric Dumazet
ether_addr_equal_64bits() requires some care about its arguments, namely that 8 bytes might be read, even if last 2 byte values are not used. KASan detected a violation with null_mac_addr and lacpdu_mcast_addr in bond_3ad.c Same problem with mac_bcast[] and mac_v6_allmcast[] in bond_alb.c : Although the 8-byte alignment was there, KASan would detect out of bound accesses. Fixes: 815117adaf5b ("bonding: use ether_addr_equal_unaligned for bond addr compare") Fixes: bb54e58929f3 ("bonding: Verify RX LACPDU has proper dest mac-addr") Fixes: 885a136c52a8 ("bonding: use compare_ether_addr_64bits() in ALB") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01net: mvneta: fix open() error cleanupRussell King - ARM Linux
If mvneta_mdio_probe() fails, a kernel warning is triggered due to missing cleanup in the error path. Add the necessary cleanup. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 281 at kernel/irq/manage.c:1814 __free_percpu_irq+0xfc/0x130 percpu IRQ 38 still enabled on CPU0! Modules linked in: bnep bluetooth xhci_plat_hcd xhci_hcd marvell_cesa armada_thermal des_generic ehci_orion mcp3021 spi_orion sfp mdio_i2c evbug fuse CPU: 1 PID: 281 Comm: connmand Not tainted 4.7.0-rc2+ #53 Hardware name: Marvell Armada 380/385 (Device Tree) Backtrace: [<c0013488>] (dump_backtrace) from [<c00137d0>] (show_stack+0x18/0x1c) r6:60010093 r5:ffffffff r4:00000000 r3:dc8ba500 [<c00137b8>] (show_stack) from [<c02c6fe0>] (dump_stack+0xa4/0xdc) [<c02c6f3c>] (dump_stack) from [<c002d4ec>] (__warn+0xd8/0x104) r6:c081e6a0 r5:00000000 r4:edfe5d50 r3:dc8ba500 [<c002d414>] (__warn) from [<c002d5d0>] (warn_slowpath_fmt+0x40/0x48) r10:a0010013 r8:c09356f8 r7:00000026 r6:ef11a260 r5:edd7b980 r4:ef11a200 [<c002d594>] (warn_slowpath_fmt) from [<c008c8e0>] (__free_percpu_irq+0xfc/0x130) r3:00000026 r2:c081e7ac [<c008c7e4>] (__free_percpu_irq) from [<c008c95c>] (free_percpu_irq+0x48/0x74) r10:00008914 r8:00000000 r7:ffffffed r6:c09356f8 r5:00000026 r4:ef11a200 [<c008c914>] (free_percpu_irq) from [<c043dd70>] (mvneta_open+0x118/0x134) r6:ffffffed r5:ef01e640 r4:ef01e000 r3:ef01e000 [<c043dc58>] (mvneta_open) from [<c055f5b4>] (__dev_open+0xa4/0x108) r7:ef01e030 r6:c06ff3d8 r5:ffff9003 r4:ef01e000 [<c055f510>] (__dev_open) from [<c055f844>] (__dev_change_flags+0x94/0x150) r7:00001002 r6:00000001 r5:ffff9003 r4:ef01e000 [<c055f7b0>] (__dev_change_flags) from [<c055f938>] (dev_change_flags+0x20/0x50) r8:00000000 r7:c09334c8 r6:00001002 r5:00000148 r4:ef01e000 r3:00008914 [<c055f918>] (dev_change_flags) from [<c05de044>] (devinet_ioctl+0x6f4/0x7e0) r8:00000000 r7:c09334c8 r6:00000000 r5:ee87200c r4:00000000 r3:00008914 [<c05dd950>] (devinet_ioctl) from [<c05e0168>] (inet_ioctl+0x1b8/0x1c8) r10:beb4499c r9:edfe4000 r8:ecf13280 r7:c096cf00 r6:beb4499c r5:eef7c240 r4:00008914 [<c05dffb0>] (inet_ioctl) from [<c053c898>] (sock_ioctl+0x78/0x300) [<c053c820>] (sock_ioctl) from [<c0155ecc>] (do_vfs_ioctl+0x98/0xa60) r7:00000011 r6:00008914 r5:00000011 r4:c01568d0 [<c0155e34>] (do_vfs_ioctl) from [<c01568d0>] (SyS_ioctl+0x3c/0x60) r10:00000000 r9:edfe4000 r8:beb4499c r7:00000011 r6:00008914 r5:ecf13280 r4:ecf13280 [<c0156894>] (SyS_ioctl) from [<c000fe60>] (ret_fast_syscall+0x0/0x1c) r8:c0010004 r7:00000036 r6:00000011 r5:000a2978 r4:00000000 r3:00009003 ---[ end trace 711f625d5b04b3a7 ]--- Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01r8152: clear LINK_OFF_WAKE_EN after autoresumehayeswang
LINK_OFF_WAKE_EN should be cleared after autoresume, otherwise after system suspend, the system would wake up when linking off occurs. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-01qlcnic: add wmb() call in transmit data path.Sony Chacko
Call wmb() to ensure writes are complete before hardware fetches updated Tx descriptors. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30usbnet: Stop RX Q on MTU changeSoohoon Lee
When MTU is changed unlink_urbs() flushes RX Q but mean while usbnet_bh() can fill up the Q at the same time. Depends on which HCD is down there unlink takes long time then the flush never ends. Signed-off-by: Soohoon Lee <soohoon.lee@f5.com> Reviewed-by: Kimball Murray <kmurray@f5.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29ixgbevf: ixgbevf_write/read_posted_mbx should use IXGBE_ERR_MBX to ↵Xin Long
initialize ret_val Now ixgbevf_write/read_posted_mbx use -IXGBE_ERR_MBX as the initiative return value, but it's incorrect, cause in ixgbevf_vlan_rx_add_vid(), it use err == IXGBE_ERR_MBX, the err returned from mac.ops.set_vfta, and in ixgbevf_set_vfta_vf, it return from write/read_posted. so we should initialize err with IXGBE_ERR_MBX, instead of -IXGBE_ERR_MBX. With this fix, the other functions that called it also can work well, cause they only care about if err is 0 or not. Signed-off-by: Xin Long <lucien.xin@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-29e1000e: keep Rx/Tx HW_VLAN_CTAG in syncJarod Wilson
The bit in the e1000 driver that mentions explicitly that the hardware has no support for separate RX/TX VLAN accel toggling rings true for e1000e as well, and thus both NETIF_F_HW_VLAN_CTAG_RX and NETIF_F_HW_VLAN_CTAG_TX need to be kept in sync. Revert a portion of commit 889ad456660461 ("e1000e: keep VLAN interfaces functional after rxvlan off") since keeping the bits in sync resolves the original issue. Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-29qed: Protect the doorbell BAR with the write barriers.Sudarsana Reddy Kalluru
SPQ doorbell is currently protected with the compilation barrier. Under the stress scenarios, we may get into a state where (due to the weak ordering) several ramrod doorbells were written to the BAR with an out-of-order producer values. Need to change the barrier type to a write barrier to make sure that the write buffer is flushed after each doorbell. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29e1000e: keep VLAN interfaces functional after rxvlan offJarod Wilson
I've got a bug report about an e1000e interface, where a VLAN interface is set up on top of it: $ ip link add link ens1f0 name ens1f0.99 type vlan id 99 $ ip link set ens1f0 up $ ip link set ens1f0.99 up $ ip addr add 192.168.99.92 dev ens1f0.99 At this point, I can ping another host on vlan 99, ip 192.168.99.91. However, if I do the following: $ ethtool -K ens1f0 rxvlan off Then no traffic passes on ens1f0.99. It comes back if I toggle rxvlan on again. I'm not sure if this is actually intended behavior, or if there's a lack of software VLAN stripping fallback, or what, but things continue to work if I simply don't call e1000e_vlan_strip_disable() if there are active VLANs (plagiarizing a function from the e1000 driver here) on the interface. Also slipped a related-ish fix to the kerneldoc text for e1000e_vlan_strip_disable here... Signed-off-by: Jarod Wilson <jarod@redhat.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29qlcnic: use the correct ring in qlcnic_83xx_process_rcv_ring_diag()Dan Carpenter
There is a static checker warning here "warn: mask and shift to zero" and the code sets "ring" to zero every time. From looking at how QLCNIC_FETCH_RING_ID() is used in qlcnic_83xx_process_rcv_ring() the qlcnic_83xx_hndl() should be removed. Fixes: 4be41e92f7c6 ('qlcnic: 83xx data path routines') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29ibmvnic: fix to use list_for_each_safe() when delete itemsWei Yongjun
Since we will remove items off the list using list_del() we need to use a safe version of the list_for_each() macro aptly named list_for_each_safe(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net: thunderx: Fix TL4 configuration for secondary QsetsSunil Goutham
TL4 calculation for a given SQ of secondary Qsets is incorrect and goes out of bounds and also for some SQ's TL4 chosen will transmit data via a different BGX interface and not same as primary Qset's interface. This patch fixes this issue. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net: thunderx: Fix link status reportingSunil Goutham
Check for SMU RX local/remote faults along with SPU LINK status. Otherwise at times link is UP at our end but DOWN at link partner's side. Also due to an issue in BGX it's rarely seen that initialization doesn't happen properly and SMU RX reports faults with everything fine at SPU. This patch tries to reinitialize LMAC to fix it. Also fixed LMAC disable sequence to properly bring down link. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Tao Wang <tao.wang@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5e: Reorganize ethtool statisticsGal Pressman
Categorize and reorganize ethtool statistics counters by renaming to "rx_*" and "tx_*" and removing redundant and duplicated counters, this way they are easier to grasp and more user friendly. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5e: Fix number of PFC counters reported to ethtoolGal Pressman
Number of PFC counters used to count only number of priorities with PFC enabled, but each priority has more than one counter, hence the need to multiply it by the number of PFC counters per priority. Fixes: cf678570d5a1 ('net/mlx5e: Add per priority group to PPort counters') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5e: Prevent adding the same vxlan portMatthew Finlay
Do not allow the same vxlan udp port to be added to the device more than once. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Matthew Finlay <matt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5e: Check for BlueFlame capability before allocating SQ uarGal Pressman
Previous to this patch mapping was always set to write combining without checking whether BlueFlame is supported in the device. Fixes: 0ba422410bbf ('net/mlx5: Fix global UAR mapping') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5e: Change enum to better reflect usageEli Cohen
Change MLX5E_STATE_ASYNC_EVENTS_ENABLE to MLX5E_STATE_ASYNC_EVENTS_ENABLED since it represent a state and not an operation. Fixes: acff797cd1874 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5: Add ConnectX-5 PCIe 4.0 to list of supported devicesMajd Dibbiny
Add the upcoming ConnectX-5 PCIe 4.0 device to the list of supported devices by the mlx5 driver. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net/mlx5: Update command stringsEli Cohen
Add command string for MODIFY_FLOW_TABLE which is used by the driver. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net: marvell: Add separate config ANEG function for Marvell 88E1111Harini Katakam
Marvell 88E1111 currently uses the generic marvell config ANEG function. This function has a sequence accessing Page 5 and Register 31, both of which are not defined or reserved for this PHY. Hence this patch adds a new config ANEG function for Marvell 88E1111 without these erroneous accesses. Signed-off-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29net: phy: Manage fixed PHY address space using IDAFlorian Fainelli
If we have a system which uses fixed PHY devices and calls fixed_phy_register() then fixed_phy_unregister() we can exhaust the number of fixed PHYs available after a while, since we keep incrementing the variable phy_fixed_addr, but we never decrement it. This patch fixes that by converting the fixed PHY allocation to using IDA, which takes care of the allocation/dealloaction of the PHY addresses for us. Fixes: a75951217472 ("net: phy: extend fixed driver with fixed_phy_register()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net/mlx5: use mlx5_buf_alloc_node instead of mlx5_buf_alloc in mlx5_wq_ll_createWang Sheng-Hui
Commit 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node") introduced mlx5_*_alloc_node() but missed changing some calling and warn messages. This patch introduces 2 changes: * Use mlx5_buf_alloc_node() instead of mlx5_buf_alloc() in mlx5_wq_ll_create() * Update the failure warn messages with _node postfix for mlx5_*_alloc function names Fixes: 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node") Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com> Acked-By: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net: bgmac: Remove superflous netif_carrier_on()Florian Fainelli
bgmac_open() calls phy_start() to initialize the PHY state machine, which will set the interface's carrier state accordingly, no need to force that as this could be conflicting with the PHY state determined by PHYLIB. Fixes: dd4544f05469 ("bgmac: driver for GBit MAC core on BCMA bus") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net: bgmac: Start transmit queue in bgmac_openFlorian Fainelli
The driver does not start the transmit queue in bgmac_open(). If the queue was stopped prior to closing then re-opening the interface, we would never be able to wake-up again. Fixes: dd4544f05469 ("bgmac: driver for GBit MAC core on BCMA bus") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net: bgmac: Fix SOF bit checkingFlorian Fainelli
We are checking for the Start of Frame bit in the ctl1 word, while this bit is set in the ctl0 word instead. Read the ctl0 word and update the check to verify that. Fixes: 9cde94506eac ("bgmac: implement scatter/gather support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28bonding: fix 802.3ad aggregator reselectionJay Vosburgh
Since commit 7bb11dc9f59d ("bonding: unify all places where actor-oper key needs to be updated."), the logic in bonding to handle selection between multiple aggregators has not functioned. This affects only configurations wherein the bonding slaves connect to two discrete aggregators (e.g., two independent switches, each with LACP enabled), thus creating two separate aggregation groups within a single bond. The cause is a change in 7bb11dc9f59d to no longer set AD_PORT_BEGIN on a port after a link state change, which would cause the port to be reselected for attachment to an aggregator as if were newly added to the bond. We cannot restore the prior behavior, as it contradicts IEEE 802.1AX 5.4.12, which requires ports that "become inoperable" (lose carrier, setting port_enabled=false as per 802.1AX 5.4.7) to remain selected (i.e., assigned to the aggregator). As the port now remains selected, the aggregator selection logic is not invoked. A side effect of this change is that aggregators in bonding will now contain ports that are link down. The aggregator selection logic does not currently handle this situation correctly, causing incorrect aggregator selection. This patch makes two changes to repair the aggregator selection logic in bonding to function as documented and within the confines of the standard: First, the aggregator selection and related logic now utilizes the number of active ports per aggregator, not the number of selected ports (as some selected ports may be down). The ad_select "bandwidth" and "count" options only consider ports that are link up. Second, on any carrier state change of any slave, the aggregator selection logic is explicitly called to insure the correct aggregator is active. Reported-by: Veli-Matti Lintu <veli-matti.lintu@opinsys.fi> Fixes: 7bb11dc9f59d ("bonding: unify all places where actor-oper key needs to be updated.") Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27Merge tag 'linux-can-fixes-for-4.7-20160623' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-06-23 this is a pull request of 3 patches for the upcoming linux-4.7 release. The first two patches are by Oliver Hartkopp fixing oopes in the generic CAN device netlink handling. Jimmy Assarsson's patch for the kvaser_usb driver adds support for more devices by adding their USB product ids. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27net: smsc911x: Fix bug where PHY interrupts are overwritten by 0Jeremy Linton
By default, mdiobus_alloc() sets the PHYs to polling mode, but a pointer size memcpy means that a couple IRQs end up being overwritten with a value of 0. This means that PHY_POLL is disabled and results in unpredictable behavior depending on the PHY's location on the MDIO bus. Remove that memcpy and the now unused phy_irq member to force the SMSC911x PHYs into polling mode 100% of the time. Fixes: e7f4dc3536a4 ("mdio: Move allocation of interrupts into core") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23Merge tag 'wireless-drivers-for-davem-2016-06-21' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.7 iwlwifi * fix the scan timeout for long scans * fix an RCU splat caused when updating the TKIP key * fix a potential NULL-derefence introduced recently * fix a IGTK key bug that has existed since the MVM driver was introduced * fix some fw capabilities checks that got accidentally inverted rtl8xxxu * fix typo on variable name ath10k * fix deadlock when peer cannot be created * fix crash related to printing features * fix deadlock while processing rx_in_ord_ind ath9k * fix GPIO mask regression for AR9462 and AR9565 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23geneve: fix tx_errors statisticsHaishuang Yan
Tx errors present summation of errors encountered while transmitting packets. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23net: vrf: replace hard tab with space in assignmentChris Packham
The assignment of rth->dst.output in vrf_rt6_create() and vrf_rtable_create() used a hard tab before the '='. The neighboring assignments did not. Make the assignment of rth->dst.output consistent with the surrounding code. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23can: kvaser_usb: Add support for more Kvaser Leaf v2 devicesJimmy Assarsson
This patch adds support for Kvaser Leaf Light HS v2 OEM, Mini PCI Express 2xHS and USBcan Light 2xHS. Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-23can: fix oops caused by wrong rtnl dellink usageOliver Hartkopp
For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created nor removed with the ip tool ... This patch adds a private dellink function for the CAN device driver interface that does just nothing. It's a follow up to commit 993e6f2fd ("can: fix oops caused by wrong rtnl newlink usage") but for dellink. Reported-by: ajneu <ajneu1@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-23can: fix handling of unmodifiable configuration options fixOliver Hartkopp
With upstream commit bb208f144cf3f59 (can: fix handling of unmodifiable configuration options) a new can_validate() function was introduced. When invoking 'ip link set can0 type can' without any configuration data can_validate() tries to validate the content without taking into account that there's totally no content. This patch adds a check for missing content. Reported-by: ajneu <ajneu1@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-22net/mlx4_en: Avoid unregister_netdev at shutdown flowEran Ben Elisha
This allows a clean shutdown, even if some netdev clients do not release their reference from this netdev. It is enough to release the HW resources only as the kernel is shutting down. Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22net/mlx4_en: Fix the return value of a failure in VLAN VID add/killKamal Heib
Modify mlx4_en_vlan_rx_[add/kill]_vid to return error value in case of failure. Fixes: 8e586137e6b6 ('net: make vlan ndo_vlan_rx_[add/kill]_vid return error value') Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-22team: Fix possible deadlock during team enslaveIdo Schimmel
Both dev_uc_sync_multiple() and dev_mc_sync_multiple() require the source device to be locked by netif_addr_lock_bh(), but this is missing in team's enslave function, so add it. This fixes the following lockdep warning: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(_xmit_ETHER/1); local_irq_disable(); lock(&(&mc->mca_lock)->rlock); lock(&team_netdev_addr_lock_key); <Interrupt> lock(&(&mc->mca_lock)->rlock); *** DEADLOCK *** Fixes: cb41c997d444 ("team: team should sync the port's uc/mc addrs when add a port") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-20can: gs_usb: Add Basic support for the bytewerk.org candleLight interfaceMaximilian Schneider
This patchs adds basic support for the bytewerk.org candleLight interface, a open hardware (CERN OHL) USB CAN adapter. Signed-off-by: Hubert Denkmair <hubert@denkmair.de> Signed-off-by: Maximilian Schneider <max@schneidersoft.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-20can: at91_can: RX queue could get stuck at high bus loadWolfgang Grandegger
At high bus load it could happen that "at91_poll()" enters with all RX message boxes filled up. If then at the end the "quota" is exceeded as well, "rx_next" will not be reset to the first RX mailbox and hence the interrupts remain disabled. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Tested-by: Amr Bekhit <amrbekhit@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-06-20can: c_can: Update D_CAN TX and RX functions to 32 bit - fix Altera Cyclone ↵Thor Thayer
access When testing CAN write floods on Altera's CycloneV, the first 2 bytes are sometimes 0x00, 0x00 or corrupted instead of the values sent. Also observed bytes 4 & 5 were corrupted in some cases. The D_CAN Data registers are 32 bits and changing from 16 bit writes to 32 bit writes fixes the problem. Testing performed on Altera CycloneV (D_CAN). Requesting tests on other C_CAN & D_CAN platforms. Reported-by: Richard Andrysek <richard.andrysek@gomtec.de> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-09-19 00:09:45 +0000