summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2021-03-25i40e: Fix kernel oops when i40e driver removes VF'sEryk Rybak
Fix the reason of kernel oops when i40e driver removed VFs. Added new __I40E_VFS_RELEASING state to signalize releasing process by PF, that it makes possible to exit of reset VF procedure. Without this patch, it is possible to suspend the VFs reset by releasing VFs resources procedure. Retrying the reset after the timeout works on the freed VF memory causing a kernel oops. Fixes: d43d60e5eb95 ("i40e: ensure reset occurs when disabling VF") Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com> Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-25i40e: Added Asym_Pause to supported link modesMateusz Palczewski
Add Asym_Pause to supported link modes (it is supported by HW). Lack of Asym_Pause in supported modes can cause several problems, i.e. it won't be possible to turn the autonegotiation on with asymmetric pause settings (i.e. Tx on, Rx off). Fixes: 4e91bcd5d47a ("i40e: Finish implementation of ethtool get settings") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "Various fixes, all over: 1) Fix overflow in ptp_qoriq_adjfine(), from Yangbo Lu. 2) Always store the rx queue mapping in veth, from Maciej Fijalkowski. 3) Don't allow vmlinux btf in map_create, from Alexei Starovoitov. 4) Fix memory leak in octeontx2-af from Colin Ian King. 5) Use kvalloc in bpf x86 JIT for storing jit'd addresses, from Yonghong Song. 6) Fix tx ptp stats in mlx5, from Aya Levin. 7) Check correct ip version in tun decap, fropm Roi Dayan. 8) Fix rate calculation in mlx5 E-Switch code, from arav Pandit. 9) Work item memork leak in mlx5, from Shay Drory. 10) Fix ip6ip6 tunnel crash with bpf, from Daniel Borkmann. 11) Lack of preemptrion awareness in macvlan, from Eric Dumazet. 12) Fix data race in pxa168_eth, from Pavel Andrianov. 13) Range validate stab in red_check_params(), from Eric Dumazet. 14) Inherit vlan filtering setting properly in b53 driver, from Florian Fainelli. 15) Fix rtnl locking in igc driver, from Sasha Neftin. 16) Pause handling fixes in igc driver, from Muhammad Husaini Zulkifli. 17) Missing rtnl locking in e1000_reset_task, from Vitaly Lifshits. 18) Use after free in qlcnic, from Lv Yunlong. 19) fix crash in fritzpci mISDN, from Tong Zhang. 20) Premature rx buffer reuse in igb, from Li RongQing. 21) Missing termination of ip[a driver message handler arrays, from Alex Elder. 22) Fix race between "x25_close" and "x25_xmit"/"x25_rx" in hdlc_x25 driver, from Xie He. 23) Use after free in c_can_pci_remove(), from Tong Zhang. 24) Uninitialized variable use in nl80211, from Jarod Wilson. 25) Off by one size calc in bpf verifier, from Piotr Krysiuk. 26) Use delayed work instead of deferrable for flowtable GC, from Yinjun Zhang. 27) Fix infinite loop in NPC unmap of octeontx2 driver, from Hariprasad Kelam. 28) Fix being unable to change MTU of dwmac-sun8i devices due to lack of fifo sizes, from Corentin Labbe. 29) DMA use after free in r8169 with WoL, fom Heiner Kallweit. 30) Mismatched prototypes in isdn-capi, from Arnd Bergmann. 31) Fix psample UAPI breakage, from Ido Schimmel" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (171 commits) psample: Fix user API breakage math: Export mul_u64_u64_div_u64 ch_ktls: fix enum-conversion warning octeontx2-af: Fix memory leak of object buf ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation net: bridge: don't notify switchdev for local FDB addresses net/sched: act_ct: clear post_ct if doing ct_clear net: dsa: don't assign an error value to tag_ops isdn: capi: fix mismatched prototypes net/mlx5: SF, do not use ecpu bit for vhca state processing net/mlx5e: Fix division by 0 in mlx5e_select_queue net/mlx5e: Fix error path for ethtool set-priv-flag net/mlx5e: Offload tuple rewrite for non-CT flows net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP net/mlx5: Add back multicast stats for uplink representor net: ipconfig: ic_dev can be NULL in ic_close_devs MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into one docs: networking: Fix a typo r8169: fix DMA being used after buffer free if WoL is enabled net: ipa: fix init header command validation ...
2021-03-24ch_ktls: fix enum-conversion warningArnd Bergmann
gcc points out an incorrect enum assignment: drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c: In function 'chcr_ktls_cpl_set_tcb_rpl': drivers/net/ethernet/chelsio/inline_crypto/ch_ktls/chcr_ktls.c:684:22: warning: implicit conversion from 'enum <anonymous>' to 'enum ch_ktls_open_state' [-Wenum-conversion] This appears harmless, and should apparently use 'CH_KTLS_OPEN_SUCCESS' instead of 'false', with the same value '0'. Fixes: efca3878a5fb ("ch_ktls: Issue if connection offload fails") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-24octeontx2-af: Fix memory leak of object bufColin Ian King
Currently the error return path when lfs fails to allocate is not free'ing the memory allocated to buf. Fix this by adding the missing kfree. Addresses-Coverity: ("Resource leak") Fixes: f7884097141b ("octeontx2-af: Formatting debugfs entry rsrc_alloc.") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-23brcmfmac: p2p: Fix recently introduced deadlock issueHans de Goede
Commit a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") replaced the rtnl_lock parameter passed to various brcmf functions with just lock, because since that commit it is not just about the rtnl_lock but also about the wiphy_lock . During this search/replace the "if (!rtnl_locked)" check in brcmfmac/p2p.c was accidentally replaced with "if (locked)", dropping the inversion of the check. This causes the code to now call rtnl_lock() while already holding the lock, causing a deadlock. Add back the "!" to the if-condition to fix this. Cc: Johannes Berg <johannes.berg@intel.com> Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210313143635.109154-1-hdegoede@redhat.com
2021-03-23mt76: mt7921: fix airtime reportingLorenzo Bianconi
Fix {tx,rx}_airtime reporting for mt7921 driver. Wrong register definitions trigger a tx hangs before resetting airtime stats. Fixes: 163f4d22c118d ("mt76: mt7921: add MAC support") Tested-by: Leon Yen <leon.yen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/c05333be0e3e85a50a71bb2de81034fe425e3701.1615284335.git.lorenzo@kernel.org
2021-03-23iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd()Jiri Kosina
It's possible for iwl_pcie_enqueue_hcmd() to be called with hard IRQs disabled (e.g. from LED core). We can't enable BHs in such a situation. Turn the unconditional BH-enable/BH-disable code into hardirq-disable/conditional-enable. This fixes the warning below. WARNING: CPU: 1 PID: 1139 at kernel/softirq.c:178 __local_bh_enable_ip+0xa5/0xf0 CPU: 1 PID: 1139 Comm: NetworkManager Not tainted 5.12.0-rc1-00004-gb4ded168af79 #7 Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017 RIP: 0010:__local_bh_enable_ip+0xa5/0xf0 Code: f7 69 e8 ee 23 14 00 fb 66 0f 1f 44 00 00 65 8b 05 f0 f4 f7 69 85 c0 74 3f 48 83 c4 08 5b c3 65 8b 05 9b fe f7 69 85 c0 75 8e <0f> 0b eb 8a 48 89 3c 24 e8 4e 20 14 00 48 8b 3c 24 eb 91 e8 13 4e RSP: 0018:ffffafd580b13298 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000201 RCX: 0000000000000000 RDX: 0000000000000003 RSI: 0000000000000201 RDI: ffffffffc1272389 RBP: ffff96517ae4c018 R08: 0000000000000001 R09: 0000000000000000 R10: ffffafd580b13178 R11: 0000000000000001 R12: ffff96517b060000 R13: 0000000000000000 R14: ffffffff80000000 R15: 0000000000000001 FS: 00007fc604ebefc0(0000) GS:ffff965267480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fb3fef13b2 CR3: 0000000109112004 CR4: 00000000003706e0 Call Trace: ? _raw_spin_unlock_bh+0x1f/0x30 iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi] iwl_trans_txq_send_hcmd+0x6c/0x430 [iwlwifi] iwl_trans_send_cmd+0x88/0x170 [iwlwifi] ? lock_acquire+0x277/0x3d0 iwl_mvm_send_cmd+0x32/0x80 [iwlmvm] iwl_mvm_led_set+0xc2/0xe0 [iwlmvm] ? led_trigger_event+0x46/0x70 led_trigger_event+0x46/0x70 ieee80211_do_open+0x5c5/0xa20 [mac80211] ieee80211_open+0x67/0x90 [mac80211] __dev_open+0xd4/0x150 __dev_change_flags+0x19e/0x1f0 dev_change_flags+0x23/0x60 do_setlink+0x30d/0x1230 ? lock_is_held_type+0xb4/0x120 ? __nla_validate_parse.part.7+0x57/0xcb0 ? __lock_acquire+0x2e1/0x1a50 __rtnl_newlink+0x560/0x910 ? __lock_acquire+0x2e1/0x1a50 ? __lock_acquire+0x2e1/0x1a50 ? lock_acquire+0x277/0x3d0 ? sock_def_readable+0x5/0x290 ? lock_is_held_type+0xb4/0x120 ? find_held_lock+0x2d/0x90 ? sock_def_readable+0xb3/0x290 ? lock_release+0x166/0x2a0 ? lock_is_held_type+0x90/0x120 rtnl_newlink+0x47/0x70 rtnetlink_rcv_msg+0x25c/0x470 ? netlink_deliver_tap+0x97/0x3e0 ? validate_linkmsg+0x350/0x350 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1b2/0x280 netlink_sendmsg+0x336/0x450 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1ed/0x250 ? copy_msghdr_from_user+0x5c/0x90 ___sys_sendmsg+0x88/0xd0 ? lock_is_held_type+0xb4/0x120 ? find_held_lock+0x2d/0x90 ? lock_release+0x166/0x2a0 ? __fget_files+0xfe/0x1d0 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 ? lockdep_hardirqs_on_prepare+0xd9/0x170 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc605c9572d Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 da ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 2e ef ff ff 48 RSP: 002b:00007fffc83789f0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000055ef468570c0 RCX: 00007fc605c9572d RDX: 0000000000000000 RSI: 00007fffc8378a30 RDI: 000000000000000c RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000 R13: 00007fffc8378b80 R14: 00007fffc8378b7c R15: 0000000000000000 irq event stamp: 170785 hardirqs last enabled at (170783): [<ffffffff9609a8c2>] __local_bh_enable_ip+0x82/0xf0 hardirqs last disabled at (170784): [<ffffffff96a8613d>] _raw_read_lock_irqsave+0x8d/0x90 softirqs last enabled at (170782): [<ffffffffc1272389>] iwl_pcie_enqueue_hcmd+0x5d9/0xa00 [iwlwifi] softirqs last disabled at (170785): [<ffffffffc1271ec6>] iwl_pcie_enqueue_hcmd+0x116/0xa00 [iwlwifi] Signed-off-by: Jiri Kosina <jkosina@suse.cz> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-rc3 Acked-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2103021125430.12405@cbobk.fhfr.pm
2021-03-22net/mlx5: SF, do not use ecpu bit for vhca state processingParav Pandit
Device firmware doesn't handle ecpu bit for vhca state processing events and commands. Instead device firmware refers to the unique function id to distinguish SF of different PCI functions. When ecpu bit is used, firmware returns a syndrome. mlx5_cmd_check:780:(pid 872): MODIFY_VHCA_STATE(0xb0e) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x263211) mlx5_sf_dev_table_create:248:(pid 872): SF DEV table create err = -22 Hence, avoid using ecpu bit. Fixes: 8f0105418668 ("net/mlx5: SF, Add port add delete functionality") Fixes: 90d010b8634b ("net/mlx5: SF, Add auxiliary device support") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-22net/mlx5e: Fix division by 0 in mlx5e_select_queueMaxim Mikityanskiy
mlx5e_select_queue compares num_tc_x_num_ch to real_num_tx_queues to determine if HTB and/or PTP offloads are active. If they are, it calculates netdev_pick_tx() % num_tc_x_num_ch to prevent it from selecting HTB and PTP queues for regular traffic. However, before the channels are first activated, num_tc_x_num_ch is zero. If ndo_select_queue gets called at this point, the HTB/PTP check will pass, and mlx5e_select_queue will attempt to take a modulo by num_tc_x_num_ch, which equals to zero. This commit fixes the bug by assigning num_tc_x_num_ch to a non-zero value before registering the netdev. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-22net/mlx5e: Fix error path for ethtool set-priv-flagAya Levin
Expose error value when failing to comply to command: $ ethtool --set-priv-flags eth2 rx_cqe_compress [on/off] Fixes: be7e87f92b58 ("net/mlx5e: Fail safe cqe compressing/moderation mode setting") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-22net/mlx5e: Offload tuple rewrite for non-CT flowsDima Chumak
Setting connection tracking OVS flows and then setting non-CT flows that use tuple rewrite action (e.g. mod_tp_dst), causes the latter flows not being offloaded. Fix by using a stricter condition in modify_header_match_supported() to check tuple rewrite support only for flows with CT action. The check is factored out into standalone modify_tuple_supported() function to aid readability. Fixes: 7e36feeb0467 ("net/mlx5e: CT: Don't offload tuple rewrites for established tuples") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-22net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDPAlaa Hleihel
Currently, we support hardware offload only for MPLS over UDP. However, rules matching on MPLS parameters are now wrongly offloaded for regular MPLS, without actually taking the parameters into consideration when doing the offload. Fix it by rejecting such unsupported rules. Fixes: 72046a91d134 ("net/mlx5e: Allow to match on mpls parameters") Signed-off-by: Alaa Hleihel <alaa@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-22net/mlx5: Add back multicast stats for uplink representorHuy Nguyen
The multicast counter got removed from uplink representor due to the cited patch. Fixes: 47c97e6b10a1 ("net/mlx5e: Fix multicast counter not up-to-date in "ip -s"") Signed-off-by: Huy Nguyen <huyn@nvidia.com> Reviewed-by: Daniel Jurgens <danielj@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-03-20r8169: fix DMA being used after buffer free if WoL is enabledHeiner Kallweit
IOMMU errors have been reported if WoL is enabled and interface is brought down. It turned out that the network chip triggers DMA transfers after the DMA buffers have been freed. For WoL to work we need to leave rx enabled, therefore simply stop the chip from being a DMA busmaster. Fixes: 567ca57faa62 ("r8169: add rtl8169_up") Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-20Merge tag 'linux-can-fixes-for-5.12-20210320' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-03-20 this is a pull request of 2 patches for net/master. The first patch is by Oliver Hartkopp. He fixes the TX-path in the ISO-TP protocol by properly initializing the outgoing CAN frames. The second patch is by me and reverts a patch from my previous pull request which added MODULE_SUPPORTED_DEVICE to the peak_usb driver. In the mean time in Linus's tree the entirely MODULE_SUPPORTED_DEVICE was removed. So this reverts the adding of the new MODULE_SUPPORTED_DEVICE to avoid the merge conflict. If you prefer to resolve the merge conflict by hand, I'll send a new pull request without that patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-20net: ipa: fix init header command validationAlex Elder
We use ipa_cmd_header_valid() to ensure certain values we will program into hardware are within range, well in advance of when we actually program them. This way we avoid having to check for errors when we actually program the hardware. Unfortunately the dev_err() call for a bad offset value does not supply the arguments to match the format specifiers properly. Fix this. There was also supposed to be a check to ensure the size to be programmed fits in the field that holds it. Add this missing check. Rearrange the way we ensure the header table fits in overall IPA memory range. Finally, update ipa_cmd_table_valid() so the format of messages printed for errors matches what's done in ipa_cmd_header_valid(). Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-20can: peak_usb: Revert "can: peak_usb: add forgotten supported devices"Marc Kleine-Budde
In commit 6417f03132a6 ("module: remove never implemented MODULE_SUPPORTED_DEVICE") the MODULE_SUPPORTED_DEVICE macro was removed from the kerne entirely. Shortly before this patch was applied mainline the commit 59ec7b89ed3e ("can: peak_usb: add forgotten supported devices") was added to net/master. As this would result in a merge conflict, let's revert this patch. Fixes: 59ec7b89ed3e ("can: peak_usb: add forgotten supported devices") Link: https://lore.kernel.org/r/20210320192649.341832-1-mkl@pengutronix.de Suggested-by: Leon Romanovsky <leon@kernel.org> Cc: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-19Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-03-19 This series contains updates to e1000e and igb drivers. Tom Seewald fixes duplicate guard issues by including the driver name in the guard for e1000e and igb. Jesse adds checks that timestamping is on and valid to avoid possible issues with a misinterpreted time stamp for igb. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-19net: stmmac: dwmac-sun8i: Provide TX and RX fifo sizesCorentin Labbe
MTU cannot be changed on dwmac-sun8i. (ip link set eth0 mtu xxx returning EINVAL) This is due to tx_fifo_size being 0, since this value is used to compute valid MTU range. Like dwmac-sunxi (with commit 806fd188ce2a ("net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes")) dwmac-sun8i need to have tx and rx fifo sizes set. I have used values from datasheets. After this patch, setting a non-default MTU (like 1000) value works and network is still useable. Tested-on: sun8i-h3-orangepi-pc Tested-on: sun8i-r40-bananapi-m2-ultra Tested-on: sun50i-a64-bananapi-m64 Tested-on: sun50i-h5-nanopi-neo-plus2 Tested-on: sun50i-h6-pine-h64 Fixes: 9f93ac8d408 ("net-next: stmmac: Add dwmac-sun8i") Reported-by: Belisko Marek <marek.belisko@gmail.com> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-19r8152: limit the RX buffer size of RTL8153A for USB 2.0Hayes Wang
If the USB host controller is EHCI, the throughput is reduced from 300Mb/s to 60Mb/s, when the rx buffer size is modified from 16K to 32K. According to the EHCI spec, the maximum size of the qTD is 20K. Therefore, when the driver uses more than 20K buffer, the latency time of EHCI would be increased. And, it let the RTL8153A get worse throughput. However, the driver uses alloc_pages() for rx buffer, so I limit the rx buffer to 16K rather than 20K. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205923 Fixes: ec5791c202ac ("r8152: separate the rx buffer size") Reported-by: Robert Davies <robdavies1977@gmail.com> Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-19igb: check timestamp validityJesse Brandeburg
Add a couple of checks to make sure timestamping is on and that the timestamp value from DMA is valid. This avoids any functional issues that could come from a misinterpreted time stamp. One of the functions changed doesn't need a return value added because there was no value in checking from the calling locations. While here, fix a couple of reverse christmas tree issues next to the code being changed. Fixes: f56e7bba22fa ("igb: Pull timestamp from fragment before adding it to skb") Fixes: 9cbc948b5a20 ("igb: add XDP support") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-19igb: Fix duplicate include guardTom Seewald
The include guard "_E1000_HW_H_" is used by two separate header files in two different drivers (e1000/e1000_hw.h and igb/e1000_hw.h). Using the same include guard macro in more than one header file may cause unexpected behavior from the compiler. Fix this by renaming the duplicate guard in the igb driver. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Tom Seewald <tseewald@gmail.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-19e1000e: Fix duplicate include guardTom Seewald
The include guard "_E1000_HW_H_" is used by header files in three different drivers (e1000/e1000_hw.h, e1000e/hw.h, and igb/e1000_hw.h). Using the same include guard macro in more than one header file may cause unexpected behavior from the compiler. Fix the duplicate include guard in the e1000e driver by renaming it. Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Signed-off-by: Tom Seewald <tseewald@gmail.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-03-18net: cdc-phonet: fix data-interface release on probe failureJohan Hovold
Set the disconnected flag before releasing the data interface in case netdev registration fails to avoid having the disconnect callback try to deregister the never registered netdev (and trigger a WARN_ON()). Fixes: 87cf65601e17 ("USB host CDC Phonet network interface driver") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18net: marvell: Remove reference to CONFIG_MV64X60Christophe Leroy
Commit 92c8c16f3457 ("powerpc/embedded6xx: Remove C2K board support") removed last selector of CONFIG_MV64X60. As it is not a user selectable config item, all references to it are stale. Remove them. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18octeontx2-af: Fix uninitialized variable warningSubbaraya Sundeep
Initialize l4_key_offset variable to fix uninitialized variable compiler warning. Fixes: b9b7421a01d8 ("octeontx2-af: Support ESP/AH RSS hashing") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18octeontx2-af: fix infinite loop in unmapping NPC counterHariprasad Kelam
unmapping npc counter works in a way by traversing all mcam entries to find which mcam rule is associated with counter. But loop cursor variable 'entry' is not incremented before checking next mcam entry which resulting in infinite loop. This in turn hogs the kworker thread forever and no other mbox message is processed by AF driver after that. Fix this by updating entry value before checking next mcam entry. Fixes: a958dd59f9ce ("octeontx2-af: Map or unmap NPC MCAM entry and counter") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18octeontx2-pf: Clear RSS enable flag on interace downGeetha sowjanya
RSS configuration can not be get/set when interface is in down state as they required mbox communication. RSS enable flag status is used for set/get configuration. Current code do not clear the RSS enable flag on interface down which lead to mbox error while trying to set/get RSS configuration. Fixes: 85069e95e531 ("octeontx2-pf: Receive side scaling support") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18octeontx2-af: Fix irq free in rvu teardownGeetha sowjanya
Current devlink code try to free already freed irqs as the irq_allocate flag is not cleared after free leading to kernel crash while removing rvu driver. The patch fixes the irq free sequence and clears the irq_allocate flag on free. Fixes: 7304ac4567bc ("octeontx2-af: Add mailbox IRQ and msg handlers") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18octeontx2-af: Return correct CGX RX fifo sizeSubbaraya Sundeep
CGX receive buffer size is a constant value and cannot be read from CGX0 block always since CGX0 may not enabled everytime. Hence return CGX receive buffer size from first enabled CGX block instead of CGX0. Fixes: 6e54e1c5399a ("octeontx2-af: cn10K: MTU configuration") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18octeontx2-af: Remove TOS field from MKEX TXSubbaraya Sundeep
The MKEX profile describes what packet fields need to be extracted from the input packet and how to place those packet fields in the output key for MCAM matching. The MKEX profile can be in a way where higher layer packet fields can overwrite lower layer packet fields in output MCAM Key. Hence MKEX profile is always ensured that there are no overlaps between any of the layers. But the commit 42006910b5ea ("octeontx2-af: cleanup KPU config data") introduced TX TOS field which overlaps with DMAC in MCAM key. This led to AF driver returning error when TX rule is installed with DMAC as match criteria since DMAC gets overwritten and cannot be supported. This patch fixes the issue by removing TOS field from MKEX TX profile. Fixes: 42006910b5ea ("octeontx2-af: cleanup KPU config data") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18octeontx2-af: Formatting debugfs entry rsrc_alloc.Rakesh Babu
With the existing rsrc_alloc's format, there is misalignment for the pcifunc entries whose VF's index is a double digit. This patch fixes this. pcifunc NPA NIX0 NIX1 SSO GROUP SSOWS TIM CPT0 CPT1 REE0 REE1 PF0:VF0 8 5 PF0:VF1 9 3 PF0:VF10 18 10 PF0:VF11 19 8 PF0:VF12 20 11 PF0:VF13 21 9 PF0:VF14 22 12 PF0:VF15 23 10 PF1 0 0 Fixes: 23205e6d06d4 ("octeontx2-af: Dump current resource provisioning status") Signed-off-by: Rakesh Babu <rsaladi2@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18octeontx2-pf: Do not modify number of rulesSubbaraya Sundeep
In the ETHTOOL_GRXCLSRLALL ioctl ethtool uses below structure to read number of rules from the driver. struct ethtool_rxnfc { __u32 cmd; __u32 flow_type; __u64 data; struct ethtool_rx_flow_spec fs; union { __u32 rule_cnt; __u32 rss_context; }; __u32 rule_locs[0]; }; Driver must not modify rule_cnt member. But currently driver modifies it by modifying rss_context. Hence fix it by using a local variable. Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-18netsec: restore phy power state after controller resetMian Yousaf Kaukab
Since commit 8e850f25b581 ("net: socionext: Stop PHY before resetting netsec") netsec_netdev_init() power downs phy before resetting the controller. However, the state is not restored once the reset is complete. As a result it is not possible to bring up network on a platform with Broadcom BCM5482 phy. Fix the issue by restoring phy power state after controller reset is complete. Fixes: 8e850f25b581 ("net: socionext: Stop PHY before resetting netsec") Cc: stable@vger.kernel.org Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-17ionic: linearize tso skb with too many fragsShannon Nelson
We were linearizing non-TSO skbs that had too many frags, but we weren't checking number of frags on TSO skbs. This could lead to a bad page reference when we received a TSO skb with more frags than the Tx descriptor could support. v2: use gso_segs rather than yet another division don't rework the check on the nr_frags Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16nfp: flower: fix pre_tun mask id allocationLouis Peens
pre_tun_rule flows does not follow the usual add-flow path, instead they are used to update the pre_tun table on the firmware. This means that if the mask-id gets allocated here the firmware will never see the "NFP_FL_META_FLAG_MANAGE_MASK" flag for the specific mask id, which triggers the allocation on the firmware side. This leads to the firmware mask being corrupted and causing all sorts of strange behaviour. Fixes: f12725d98cbe ("nfp: flower: offload pre-tunnel rules") Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16nfp: flower: add ipv6 bit to pre_tunnel control messageLouis Peens
Differentiate between ipv4 and ipv6 flows when configuring the pre_tunnel table to prevent them trampling each other in the table. Fixes: 783461604f7e ("nfp: flower: update flow merge code to support IPv6 tunnels") Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16nfp: flower: fix unsupported pre_tunnel flowsLouis Peens
There are some pre_tunnel flows combinations which are incorrectly being offloaded without proper support, fix these. - Matching on MPLS is not supported for pre_tun. - Match on IPv4/IPv6 layer must be present. - Destination MAC address must match pre_tun.dev MAC Fixes: 120ffd84a9ec ("nfp: flower: verify pre-tunnel rules") Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16net: broadcom: BCM4908_ENET should not default to y, unconditionallyGeert Uytterhoeven
Merely enabling compile-testing should not enable additional code. To fix this, restrict the automatic enabling of BCM4908_ENET to ARCH_BCM4908. Fixes: 4feffeadbcb2e5b1 ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-16can: m_can: m_can_rx_peripheral(): fix RX being blocked by errorsTorin Cooper-Bennun
For M_CAN peripherals, m_can_rx_handler() was called with quota = 1, which caused any error handling to block RX from taking place until the next time the IRQ handler is called. This had been observed to cause RX to be blocked indefinitely in some cases. This is fixed by calling m_can_rx_handler with a sensibly high quota. Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Link: https://lore.kernel.org/r/20210303144350.4093750-1-torin@maxiluxsystems.com Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-16can: m_can: m_can_do_rx_poll(): fix extraneous msg loss warningTorin Cooper-Bennun
Message loss from RX FIFO 0 is already handled in m_can_handle_lost_msg(), with netdev output included. Removing this warning also improves driver performance under heavy load, where m_can_do_rx_poll() may be called many times before this interrupt is cleared, causing this message to be output many times (thanks Mariusz Madej for this report). Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support") Link: https://lore.kernel.org/r/20210303103151.3760532-1-torin@maxiluxsystems.com Reported-by: Mariusz Madej <mariusz.madej@xtrack.com> Signed-off-by: Torin Cooper-Bennun <torin@maxiluxsystems.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-16can: c_can: move runtime PM enable/disable to c_can_platformTong Zhang
Currently doing modprobe c_can_pci will make the kernel complain: Unbalanced pm_runtime_enable! this is caused by pm_runtime_enable() called before pm is initialized. This fix is similar to 227619c3ff7c, move those pm_enable/disable code to c_can_platform. Fixes: 4cdd34b26826 ("can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller") Link: http://lore.kernel.org/r/20210302025542.987600-1-ztong0001@gmail.com Signed-off-by: Tong Zhang <ztong0001@gmail.com> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-16can: c_can_pci: c_can_pci_remove(): fix use-after-freeTong Zhang
There is a UAF in c_can_pci_remove(). dev is released by free_c_can_dev() and is used by pci_iounmap(pdev, priv->base) later. To fix this issue, save the mmio address before releasing dev. Fixes: 5b92da0443c2 ("c_can_pci: generic module for C_CAN/D_CAN on PCI") Link: https://lore.kernel.org/r/20210301024512.539039-1-ztong0001@gmail.com Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-16can: kvaser_usb: Add support for USBcan Pro 4xHSJimmy Assarsson
Add support for Kvaser USBcan Pro 4xHS. Link: https://lore.kernel.org/r/20210309091724.31262-2-jimmyassarsson@gmail.com Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-16can: kvaser_pciefd: Always disable bus load reportingJimmy Assarsson
Under certain circumstances, when switching from Kvaser's linuxcan driver (kvpciefd) to the SocketCAN driver (kvaser_pciefd), the bus load reporting is not disabled. This is flooding the kernel log with prints like: [3485.574677] kvaser_pciefd 0000:02:00.0: Received unexpected packet type 0x00000009 Always put the controller in the expected state, instead of assuming that bus load reporting is inactive. Note: If bus load reporting is enabled when the driver is loaded, you will still get a number of bus load packages (and printouts), before it is disabled. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Link: https://lore.kernel.org/r/20210309091724.31262-1-jimmyassarsson@gmail.com Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-16can: flexcan: flexcan_chip_freeze(): fix chip freeze for missing bitrateAngelo Dureghello
For cases when flexcan is built-in, bitrate is still not set at registering. So flexcan_chip_freeze() generates: [ 1.860000] *** ZERO DIVIDE *** FORMAT=4 [ 1.860000] Current process id is 1 [ 1.860000] BAD KERNEL TRAP: 00000000 [ 1.860000] PC: [<402e70c8>] flexcan_chip_freeze+0x1a/0xa8 To allow chip freeze, using an hardcoded timeout when bitrate is still not set. Fixes: ec15e27cc890 ("can: flexcan: enable RX FIFO after FRZ/HALT valid") Link: https://lore.kernel.org/r/20210315231510.650593-1-angelo@kernel-space.org Signed-off-by: Angelo Dureghello <angelo@kernel-space.org> [mkl: use if instead of ? operator] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-16can: peak_usb: add forgotten supported devicesStephane Grosjean
Since the peak_usb driver also supports the CAN-USB interfaces "PCAN-USB X6" and "PCAN-Chip USB" from PEAK-System GmbH, this patch adds their names to the list of explicitly supported devices. Fixes: ea8b65b596d7 ("can: usb: Add support of PCAN-Chip USB stamp module") Fixes: f00b534ded60 ("can: peak: Add support for PCAN-USB X6 USB interface") Link: https://lore.kernel.org/r/20210309082128.23125-3-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-03-16can: dev: Move device back to init netns on owning netns deleteMartin Willi
When a non-initial netns is destroyed, the usual policy is to delete all virtual network interfaces contained, but move physical interfaces back to the initial netns. This keeps the physical interface visible on the system. CAN devices are somewhat special, as they define rtnl_link_ops even if they are physical devices. If a CAN interface is moved into a non-initial netns, destroying that netns lets the interface vanish instead of moving it back to the initial netns. default_device_exit() skips CAN interfaces due to having rtnl_link_ops set. Reproducer: ip netns add foo ip link set can0 netns foo ip netns delete foo WARNING: CPU: 1 PID: 84 at net/core/dev.c:11030 ops_exit_list+0x38/0x60 CPU: 1 PID: 84 Comm: kworker/u4:2 Not tainted 5.10.19 #1 Workqueue: netns cleanup_net [<c010e700>] (unwind_backtrace) from [<c010a1d8>] (show_stack+0x10/0x14) [<c010a1d8>] (show_stack) from [<c086dc10>] (dump_stack+0x94/0xa8) [<c086dc10>] (dump_stack) from [<c086b938>] (__warn+0xb8/0x114) [<c086b938>] (__warn) from [<c086ba10>] (warn_slowpath_fmt+0x7c/0xac) [<c086ba10>] (warn_slowpath_fmt) from [<c0629f20>] (ops_exit_list+0x38/0x60) [<c0629f20>] (ops_exit_list) from [<c062a5c4>] (cleanup_net+0x230/0x380) [<c062a5c4>] (cleanup_net) from [<c0142c20>] (process_one_work+0x1d8/0x438) [<c0142c20>] (process_one_work) from [<c0142ee4>] (worker_thread+0x64/0x5a8) [<c0142ee4>] (worker_thread) from [<c0148a98>] (kthread+0x148/0x14c) [<c0148a98>] (kthread) from [<c0100148>] (ret_from_fork+0x14/0x2c) To properly restore physical CAN devices to the initial netns on owning netns exit, introduce a flag on rtnl_link_ops that can be set by drivers. For CAN devices setting this flag, default_device_exit() considers them non-virtual, applying the usual namespace move. The issue was introduced in the commit mentioned below, as at that time CAN devices did not have a dellink() operation. Fixes: e008b5fc8dc7 ("net: Simplfy default_device_exit and improve batching.") Link: https://lore.kernel.org/r/20210302122423.872326-1-martin@strongswan.org Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit (git 2.34.1) at 2025-09-20 02:21:54 +0000