| Age | Commit message (Collapse) | Author |
|---|
|
Add devices IDs for the next LOM generations that will be available on the
next Intel Client platforms. This patch provides the initial support for
these devices.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
With the 10us interval, we were seeing PTM transactions take around 12us.
Hardware team suggested this interval could be lowered to 1us which was
confirmed with PCIe sniffer. With the 1us interval, PTM dialogs took
around 2us.
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add support for using the four sets of timestamping registers that
i225/i226 have available for TX.
In some workloads, where multiple applications request hardware
transmission timestamps, it was possible that some of those requests
were denied because the only in use register was already occupied.
This is also in preparation to future support for hardware
timestamping with multiple PTP domains. With multiple domains chances
of multiple TX timestamps being requested at the same time increase.
Before:
$ sudo ./ntpperf -i enp3s0 -m 10:22:22:22:22:21 -d 192.168.1.3 -s 172.18.0.0/16 -I -H -o 37
| responses | TX timestamp offset (ns)
rate clients | lost invalid basic xleave | min mean max stddev
1000 100 0.00% 0.00% 0.00% 100.00% +1 +41 +73 13
1500 150 0.00% 0.00% 0.00% 100.00% +9 +49 +87 15
2250 225 0.00% 0.00% 0.00% 100.00% +9 +42 +79 13
3375 337 0.00% 0.00% 0.00% 100.00% +11 +46 +81 13
5062 506 0.00% 0.00% 0.00% 100.00% +7 +44 +80 13
7593 759 0.00% 0.00% 0.00% 100.00% +9 +44 +79 12
11389 1138 0.00% 0.00% 0.00% 100.00% +14 +51 +87 13
17083 1708 0.00% 0.00% 0.00% 100.00% +1 +41 +80 14
25624 2562 0.00% 0.00% 0.00% 100.00% +11 +50 +5107 51
38436 3843 0.00% 0.00% 0.00% 100.00% -2 +36 +7843 38
57654 5765 0.00% 0.00% 0.00% 100.00% +4 +42 +10503 69
86481 8648 0.00% 0.00% 0.00% 100.00% +11 +54 +5492 65
129721 12972 0.00% 0.00% 0.00% 100.00% +31 +2680 +6942 2606
194581 16384 16.79% 0.00% 0.87% 82.34% +73 +4444 +15879 3116
291871 16384 35.05% 0.00% 1.53% 63.42% +188 +5381 +17019 3035
437806 16384 54.95% 0.00% 2.55% 42.50% +233 +6302 +13885 2846
After:
$ sudo ./ntpperf -i enp3s0 -m 10:22:22:22:22:21 -d 192.168.1.3 -s 172.18.0.0/16 -I -H -o 37
| responses | TX timestamp offset (ns)
rate clients | lost invalid basic xleave | min mean max stddev
1000 100 0.00% 0.00% 0.00% 100.00% -20 +12 +43 13
1500 150 0.00% 0.00% 0.00% 100.00% -23 +18 +57 14
2250 225 0.00% 0.00% 0.00% 100.00% -2 +33 +67 13
3375 337 0.00% 0.00% 0.00% 100.00% +1 +38 +76 13
5062 506 0.00% 0.00% 0.00% 100.00% +9 +52 +93 14
7593 759 0.00% 0.00% 0.00% 100.00% +11 +47 +82 13
11389 1138 0.00% 0.00% 0.00% 100.00% -9 +27 +74 13
17083 1708 0.00% 0.00% 0.00% 100.00% -13 +25 +66 14
25624 2562 0.00% 0.00% 0.00% 100.00% -8 +28 +65 13
38436 3843 0.00% 0.00% 0.00% 100.00% -13 +28 +69 13
57654 5765 0.00% 0.00% 0.00% 100.00% -11 +32 +71 14
86481 8648 0.00% 0.00% 0.00% 100.00% +2 +44 +83 14
129721 12972 15.36% 0.00% 0.35% 84.29% -2 +2248 +22907 4252
194581 16384 42.98% 0.00% 1.98% 55.04% -4 +5278 +65039 5856
291871 16384 54.33% 0.00% 2.21% 43.46% -3 +6306 +22608 5665
We can see that with 4 registers, as expected, we are able to handle a
increasing number of requests more consistently, but as soon as all
registers are in use, the decrease in quality of service happens in a
sharp step.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Documentation/process/license-rules.rst and checkpatch expect the SPDX
identifier syntax for multiple licenses to use capital "OR". Correct it
to keep consistent format and avoid copy-paste issues.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: FLorian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230823085632.116725-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Leon Romanovsky says:
====================
mlx5 MACsec RoCEv2 support
From Patrisious:
This series extends previously added MACsec offload support
to cover RoCE traffic either.
In order to achieve that, we need configure MACsec with offload between
the two endpoints, like below:
REMOTE_MAC=10:70:fd:43:71:c0
* ip addr add 1.1.1.1/16 dev eth2
* ip link set dev eth2 up
* ip link add link eth2 macsec0 type macsec encrypt on
* ip macsec offload macsec0 mac
* ip macsec add macsec0 tx sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16
* ip macsec add macsec0 rx port 1 address $REMOTE_MAC
* ip macsec add macsec0 rx port 1 address $REMOTE_MAC sa 0 pn 1 on key 01 ead3664f508eb06c40ac7104cdae4ce5
* ip addr add 10.1.0.1/16 dev macsec0
* ip link set dev macsec0 up
And in a similar manner on the other machine, while noting the keys order
would be reversed and the MAC address of the other machine.
RDMA traffic is separated through relevant GID entries and in case
of IP ambiguity issue - meaning we have a physical GIDs and a MACsec
GIDs with the same IP/GID, we disable our physical GID in order
to force the user to only use the MACsec GID.
v0: https://lore.kernel.org/netdev/20230813064703.574082-1-leon@kernel.org/
* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
RDMA/mlx5: Handles RoCE MACsec steering rules addition and deletion
net/mlx5: Add RoCE MACsec steering infrastructure in core
net/mlx5: Configure MACsec steering for ingress RoCEv2 traffic
net/mlx5: Configure MACsec steering for egress RoCEv2 traffic
IB/core: Reorder GID delete code for RoCE
net/mlx5: Add MACsec priorities in RDMA namespaces
RDMA/mlx5: Implement MACsec gid addition and deletion
net/mlx5: Maintain fs_id xarray per MACsec device inside macsec steering
net/mlx5: Remove netdevice from MACsec steering
net/mlx5e: Move MACsec flow steering and statistics database from ethernet to core
net/mlx5e: Rename MACsec flow steering functions/parameters to suit core naming style
net/mlx5: Remove dependency of macsec flow steering on ethernet
net/mlx5e: Move MACsec flow steering operations to be used as core library
macsec: add functions to get macsec real netdevice and check offload
====================
Link: https://lore.kernel.org/r/20230821073833.59042-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/net/inet_sock.h
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
c274af224269 ("inet: introduce inet->inet_flags")
https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/
Adjacent changes:
drivers/net/bonding/bond_alb.c
e74216b8def3 ("bonding: fix macvlan over alb bond support")
f11e5bd159b0 ("bonding: support balance-alb with openvswitch")
drivers/net/ethernet/broadcom/bgmac.c
d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()")
23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()")
drivers/net/ethernet/broadcom/genet/bcmmii.c
32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()")
acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()")
net/sctp/socket.c
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-08-22
1) Patches #1..#13 From Jiri:
The goal of this patchset is to make the SF code cleaner.
Benefit from previously introduced devlink_port struct containerization
to avoid unnecessary lookups in devlink port ops.
Also, benefit from the devlink locking changes and avoid unnecessary
reference counting.
2) Patches #14,#15:
Add ability to configure proto both UDP and TCP selectors in RX and TX
directions.
* tag 'mlx5-updates-2023-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Support IPsec upper TCP protocol selector
net/mlx5e: Support IPsec upper protocol selector field offload for RX
net/mlx5: Store vport in struct mlx5_devlink_port and use it in port ops
net/mlx5: Check vhca_resource_manager capability in each op and add extack msg
net/mlx5: Relax mlx5_devlink_eswitch_get() return value checking
net/mlx5: Return -EOPNOTSUPP in mlx5_devlink_port_fn_migratable_set() directly
net/mlx5: Reduce number of vport lookups passing vport pointer instead of index
net/mlx5: Embed struct devlink_port into driver structure
net/mlx5: Don't register ops for non-PF/VF/SF port and avoid checks in ops
net/mlx5: Remove no longer used mlx5_esw_offloads_sf_vport_enable/disable()
net/mlx5: Introduce mlx5_eswitch_load/unload_sf_vport() and use it from SF code
net/mlx5: Allow mlx5_esw_offloads_devlink_port_register() to register SFs
net/mlx5: Push devlink port PF/VF init/cleanup calls out of devlink_port_register/unregister()
net/mlx5: Push out SF devlink port init and cleanup code to separate helpers
net/mlx5: Rework devlink port alloc/free into init/cleanup
====================
Link: https://lore.kernel.org/all/20230823051012.162483-1-saeed@kernel.org/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode
bonds") aims to enable the use of macvlans on top of rlb bond mode. However,
the current rlb bond mode only handles ARP packets to update remote neighbor
entries. This causes an issue when a macvlan is on top of the bond, and
remote devices send packets to the macvlan using the bond's MAC address
as the destination. After delivering the packets to the macvlan, the macvlan
will rejects them as the MAC address is incorrect. Consequently, this commit
makes macvlan over bond non-functional.
To address this problem, one potential solution is to check for the presence
of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev)
and return NULL in the rlb_arp_xmit() function. However, this approach
doesn't fully resolve the situation when a VLAN exists between the bond and
macvlan.
So let's just do a partial revert for commit 14af9963ba1e in rlb_arp_xmit().
As the comment said, Don't modify or load balance ARPs that do not originate
locally.
Fixes: 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds")
Reported-by: susan.zheng@veritas.com
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Systems having 4 GiB of RAM and more require DMA addressing beyond the
current 32-bit limit. Starting from MT7988 the hardware now supports
36-bit DMA addressing, let's use that new capability in the driver to
avoid running into swiotlb on systems with 4 GiB of RAM or more.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/95b919c98876c9e49761e44662e7c937479eecb8.1692721443.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MT7981, MT7986 and MT7988 come with in-SoC SRAM dedicated for Ethernet
DMA rings. Support using the SRAM without breaking existing device tree
bindings, ie. only new SoC starting from MT7988 will have the SRAM
declared as additional resource in device tree. For MT7981 and MT7986
an offset on top of the main I/O base is used.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/e45e0f230c63ad58869e8fe35b95a2fb8925b625.1692721443.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add bits needed to reset the frame engine on MT7988.
Fixes: 445eb6448ed3 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/89b6c38380e7a3800c1362aa7575600717bc7543.1692721443.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
More register macros need to be adjusted for the 3rd GMAC on MT7988.
Account for added bit in SYSCFG0_SGMII_MASK.
Fixes: 445eb6448ed3 ("net: ethernet: mtk_eth_soc: add basic support for MT7988 SoC")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/1c8da012e2ca80939906d85f314138c552139f0f.1692721443.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As we already added the exception tracing for XDP_TX, I think it is
necessary to add the exception tracing for other XDP actions, such
as XDP_REDIRECT, XDP_ABORTED and unknown error actions.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230822065255.606739-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the standard error pointer macro to shorten the code and simplify.
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20230822021455.205101-2-liaoyu15@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently when ath12k_dp_cc_desc_init() is called we allocate
memory to rx_descs and tx_descs. In ath12k_dp_cc_cleanup(), during
descriptor cleanup rx_descs and tx_descs memory is not freed.
This is cause of memory leak. These allocated memory should be
freed in ath12k_dp_cc_cleanup.
In ath12k_dp_cc_desc_init(), we can save base address of rx_descs
and tx_descs. In ath12k_dp_cc_cleanup(), we can free rx_descs and
tx_descs memory using their base address.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Rajat Soni <quic_rajson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230718053510.30894-1-quic_rajson@quicinc.com
|
|
coccinielle reported the following:
./drivers/net/wireless/ath/ath5k/phy.c:1573:25-26: WARNING opportunity for swap()
while trying to fix the above warning, it reveals that ath5k_hw_get_median_noise_floor()
had open-coded sort() functionality. Since ath5k_hw_get_median_noise_floor() only
executes once every 10 seconds, any extra overhead due to sort() calling
its "compare" and "swap" functions can be ignored, so replace the
existing logic with a call to sort().
Signed-off-by: Mahmoud Maatuq <mahmoudmatook.mm@gmail.com>
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230815040819.649455-1-mahmoudmatook.mm@gmail.com
|
|
This has never been used since the driver was merged, but it now causes
a W=1 warning in recent clang versions
drivers/net/wireless/ath/ath9k/main.c:1566:21: error: parameter 'changed_flags' set but not used [-Werror,-Wunused-but-set-parameter]
drivers/net/wireless/ath/ath9k/htc_drv_main.c:1258:25: error: parameter 'changed_flags' set but not used [-Werror,-Wunused-but-set-parameter]
drivers/net/wireless/ath/ath5k/mac80211-ops.c:367:62: error: parameter 'changed_flags' set but not used [-Werror,-Wunused-but-set-parameter]
Remove the bit manipulation on the otherwise unused parameter.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230814073255.1065242-1-arnd@kernel.org
|
|
Commit 2c3960c2253d ("ath11k: setup ce tasklet for control path")
declared but never implemented ath11k_ce_map_service_to_pipe().
Commit e3396b8bddd2 ("ath11k: ce: support different CE configurations")
declared but never implemented ath11k_ce_attr_attach().
Commit d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
declared but never implemented ath11k_qmi_event_work()/ath11k_qmi_msg_recv_work().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230811104413.33668-1-yuehaibing@huawei.com
|
|
'hw_rev' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
ath10k/ahb.c:736:11: error: cast to smaller integer type 'enum ath10k_hw_rev' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230810091224.70088-2-krzysztof.kozlowski@linaro.org
|
|
'hw_rev' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
h11k/ahb.c:1124:11: error: cast to smaller integer type 'enum ath11k_hw_rev' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230810091224.70088-1-krzysztof.kozlowski@linaro.org
|
|
The init/exit() of driver only calls platform_driver_register/unregister,
it can be simpilfied with module_platform_driver.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230804091255.1347178-1-yangyingliang@huawei.com
|
|
Fix a few issues flagged by 'codespell'.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230822-ath_spelling-v1-3-8e2698759564@quicinc.com
|
|
Fix a few issues flagged by 'codespell'.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230822-ath_spelling-v1-2-8e2698759564@quicinc.com
|
|
Fix a few issues flagged by 'codespell'.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230822-ath_spelling-v1-1-8e2698759564@quicinc.com
|
|
Helper function ath11k_vif_to_arvif() exists to retrieve a struct
ath11k_vif from a struct ieee80211_vif. However, in multiple places
this logic is open-coded with inline typecasting. Since the
typecasting prevents the compiler from type-checking the source and
destination, update the driver to consistently use the helper
function.
No functional changes, compile tested only.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230821-ath11k_vif_to_arvif-v1-1-fa2c3b60b5cf@quicinc.com
|
|
When a function is using functions from mac80211 to free an skb then it
should do it consistently and not switch to the generic dev_kfree_skb_any
(or similar functions). Otherwise (like in the error handlers), mac80211
will will not be aware of the freed skb and thus not clean up related
information in its internal data structures.
Not doing so lead in the past to filled up structure which then prevented
new clients to connect.
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Fixes: 6257c702264c ("wifi: ath11k: fix tx status reporting in encap offload mode")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230802-ath11k-ack_status_leak-v2-2-c0af729d6229@narfation.org
|
|
When a station idles for a long time, hostapd will try to send a QoS Null
frame to the station as "poll". NL80211_CMD_PROBE_CLIENT is used for this
purpose. And the skb will be added to ack_status_frame - waiting for a
completion via ieee80211_report_ack_skb().
But when the peer was already removed before the tx_complete arrives, the
peer will be missing. And when using dev_kfree_skb_any (instead of going
through mac80211), the entry will stay inside ack_status_frames. This IDR
will therefore run full after 8K request were generated for such clients.
At this point, the access point will then just stall and not allow any new
clients because idr_alloc() for ack_status_frame will fail.
ieee80211_free_txskb() on the other hand will (when required) call
ieee80211_report_ack_skb() and make sure that (when required) remove the
entry from the ack_status_frame.
Tested-on: IPQ6018 hw1.0 WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Fixes: 6257c702264c ("wifi: ath11k: fix tx status reporting in encap offload mode")
Fixes: 94739d45c388 ("ath11k: switch to using ieee80211_tx_status_ext()")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230802-ath11k-ack_status_leak-v2-1-c0af729d6229@narfation.org
|
|
Commit 8399918f3056 ("staging: wilc1000: use RCU list to maintain vif interfaces list")
removed wilc_get_interface() but not its declaration.
Commit 9bc061e88054 ("staging: wilc1000: added support to dynamically add/remove interfaces")
declared but never implemented wilc_cfg_alloc() and wilc_netdev_interface().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230819102100.13720-1-yuehaibing@huawei.com
|
|
In 'mwifiex_handle_uap_rx_forward()', always check the value
returned by 'skb_copy()' to avoid potential NULL pointer
dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop
original skb in case of copying failure.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 838e4f449297 ("mwifiex: improve uAP RX handling")
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230814095041.16416-1-dmantipov@yandex.ru
|
|
In the vendor driver, the current channel power is queried from
EEPROM_TXPOWER_BG1 and EEPROM_TXPOWER_BG2. And then the mixed value
will be written into the low half-word of the TX_ALC_CFG_0 register.
The high half-word of the TX_ALC_CFG_0 is a fixed value 0x2f2f.
We can't get the accurate TX power. Based on my tests and the new
MediaTek mt76 driver source code, the real TX power is approximately
equal to channel_power + (max) rate_power. Usually max rate_power is
the gain of the OFDM 6M rate, which can be readed from the offset
EEPROM_TXPOWER_BYRATE +1.
Based on these eeprom values, this patch adds basic TX power control
for the MT7620 and limits its maximum TX power. This can avoid the
link speed decrease caused by chip overheating. rt2800_config_alc()
function has also been renamed to rt2800_config_alc_rt6352() because
it's only used by RT6352 (MT7620).
Notice:
It's still need some work to sync the max channel power to the user
interface. This part is missing from the rt2x00 driver framework. If
we set the power exceed the calibration value, it won't take effect.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/TYAP286MB03159090ED14044215E59FD6BC10A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
|
|
Use the helper function devm_kmemdup() rather than duplicating its
implementation, which helps to enhance code readability.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230810114939.2104013-1-lizetao1@huawei.com
|
|
No need cast (void*) to (struct rsi_91x_usbdev *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073606.3667062-1-yunchuan@nfschina.com
|
|
No need cast (void*) to (struct rsi_91x_usbdev *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073558.3666936-1-yunchuan@nfschina.com
|
|
No need cast (void*) to (struct rsi_91x_sdiodev *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073550.3666829-1-yunchuan@nfschina.com
|
|
No need cast (void*) to (struct rsi_91x_sdiodev *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073539.3666735-1-yunchuan@nfschina.com
|
|
No need cast (void*) to (struct rsi_common *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073529.3666653-1-yunchuan@nfschina.com
|
|
No need cast (struct rsi_hw *) to (struct rsi_hw *),
or cast (struct rsi_common *) to (struct rsi_common *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073517.3666559-1-yunchuan@nfschina.com
|
|
No need cast (struct rsi_hw *) to (struct rsi_hw *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073507.3666471-1-yunchuan@nfschina.com
|
|
No need cast (void*) to (struct rsi_91x_sdiodev *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073455.3666306-1-yunchuan@nfschina.com
|
|
No need cast (void*) to (struct rsi_coex_ctrl_block *) or
(struct rsi_common *).
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230803073440.3666204-1-yunchuan@nfschina.com
|
|
When building for power4, newer binutils don't recognise the "dcbfl"
extended mnemonic.
dcbfl RA, RB is equivalent to dcbf RA, RB, 1.
Switch to "dcbf" to avoid the build error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add check for pf->vf not being NULL before dereferencing
pf->vf[vsi->vf_id] in updating VSI filter sync.
Add a similar check before dereferencing !pf->vf[vsi->vf_id].trusted
in the condition for clearing promisc mode bit.
Fixes: c87c938f62d8 ("i40e: Add VF VLAN pruning")
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All callers of build_skb() (*) in bnxt are in NAPI context.
The budget checking is somewhat convoluted because in the shared
completion queue cases Rx packets are discarded by netpoll
by forcing an error (E). But that happens before skb allocation.
Only a call chain starting at __bnxt_poll_work() can lead to
an skb allocation and it checks budget (b).
* bnxt_rx_multi_page_skb
* bnxt_rx_skb
` bp->rx_skb_func
* bnxt_tpa_end
` bnxt_rx_pkt
E bnxt_force_rx_discard
E bnxt_poll_nitroa0
b __bnxt_poll_work
Use napi_build_skb() to take advantage of the skb cache.
In iperf tests with HW-GRO enabled it barely makes a difference
but in cases where HW-GRO is not as effective (or disabled) it
can give even a >10% boost (20.7Gbps -> 23.1Gbps).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove debug logs in port vlan management, since there are already multiple
tracepoints defined for those operations in DSA
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The virtio_net driver currently deals with different versions and types
of virtio net headers, such as virtio_net_hdr_mrg_rxbuf,
virtio_net_hdr_v1_hash, etc. Due to these variations, the code relies
on multiple type casts to convert memory between different structures,
potentially leading to bugs when there are changes in these structures.
Introduces the "struct skb_vnet_common_hdr" as a unifying header
structure using a union. With this approach, various virtio net header
structures can be converted by accessing different members of this
structure, thus eliminating the need for type casting and reducing the
risk of potential bugs.
For example following code:
static struct sk_buff *page_to_skb(struct virtnet_info *vi,
struct receive_queue *rq,
struct page *page, unsigned int offset,
unsigned int len, unsigned int truesize,
unsigned int headroom)
{
[...]
struct virtio_net_hdr_mrg_rxbuf *hdr;
[...]
hdr_len = vi->hdr_len;
[...]
ok:
hdr = skb_vnet_hdr(skb);
memcpy(hdr, hdr_p, hdr_len);
[...]
}
When VIRTIO_NET_F_HASH_REPORT feature is enabled, hdr_len = 20
But the sizeof(*hdr) is 12,
memcpy(hdr, hdr_p, hdr_len); will copy 20 bytes to the hdr,
which make a potential risk of bug. And this risk can be avoided by
introducing struct skb_vnet_common_hdr.
Change log
v1->v2
feedback from Willem de Bruijn <willemdebruijn.kernel@gmail.com>
feedback from Simon Horman <horms@kernel.org>
1. change to use net-next tree.
2. move skb_vnet_common_hdr inside kernel file instead of the UAPI header.
v2->v3
feedback from Willem de Bruijn <willemdebruijn.kernel@gmail.com>
1. fix typo in commit message.
2. add original struct virtio_net_hdr into union
3. remove virtio_net_hdr_mrg_rxbuf variable in receive_buf;
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert list_for_each() to list_for_each_entry() where applicable.
No functional changed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After the conversion to use the auxiliary bus, the custom device
management is not needed anymore and can be deleted.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the auxiliary bus to perform device management of the infiniband
part of the mlx4 driver.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the auxiliary bus to perform device management of the ethernet part
of the mlx4 driver.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add an auxiliary virtual bus to model the mlx4 driver structure. The
code is added along the current custom device management logic.
Subsequent patches switch mlx4_en and mlx4_ib to the auxiliary bus and
the old interface is then removed.
Structure mlx4_priv gains a new adev dynamic array to keep track of its
auxiliary devices. Access to the array is protected by the global
mlx4_intf mutex.
Functions mlx4_register_device() and mlx4_unregister_device() are
updated to expose auxiliary devices on the bus in order to load mlx4_en
and/or mlx4_ib. Functions mlx4_register_auxiliary_driver() and
mlx4_unregister_auxiliary_driver() are added to substitute
mlx4_register_interface() and mlx4_unregister_interface(), respectively.
Function mlx4_do_bond() is adjusted to walk over the adev array and
re-adds a specific auxiliary device if its driver sets the
MLX4_INTFF_BONDING flag.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
