| Age | Commit message (Collapse) | Author |
|---|
|
The mlx4_core driver has a logic that allows a sub-driver to set the
MLX4_INTFF_BONDING flag which then causes that function mlx4_do_bond()
asks the sub-driver to fully re-probe a device when its bonding
configuration changes.
Performing this operation is disallowed in mlx4_register_interface()
when it is detected that any mlx4 device is multifunction (SRIOV). The
code then resets MLX4_INTFF_BONDING in the driver flags.
Move this check directly into mlx4_do_bond(). It provides a better
separation as mlx4_core no longer directly modifies the sub-driver flags
and it will allow to get rid of explicitly keeping track of all mlx4
devices by the intf.c code when it is switched to an auxiliary bus.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Function mlx4_en_queue_bond_work() is used in mlx4_en to start a bond
reconfiguration. It gathers data about a new port map setting, takes
a reference on the netdev that triggered the change and queues a work
object on mlx4_en_priv.mdev.workqueue to perform the operation. The
scheduled work is mlx4_en_bond_work() which calls
mlx4_bond()/mlx4_unbond() and consequently mlx4_do_bond().
At the same time, function mlx4_change_port_types() in mlx4_core might
be invoked to change the port type configuration. As part of its logic,
it re-registers the whole device by calling mlx4_unregister_device(),
followed by mlx4_register_device().
The two operations can result in concurrent access to the data about
currently active interfaces on the device.
Functions mlx4_register_device() and mlx4_unregister_device() lock the
intf_mutex to gain exclusive access to this data. The current
implementation of mlx4_do_bond() doesn't do that which could result in
an unexpected behavior. An updated version of mlx4_do_bond() for use
with an auxiliary bus goes and locks the intf_mutex when accessing a new
auxiliary device array.
However, doing so can then result in the following deadlock:
* A two-port mlx4 device is configured as an Ethernet bond.
* One of the ports is changed from eth to ib, for instance, by writing
into a mlx4_port<x> sysfs attribute file.
* mlx4_change_port_types() is called to update port types. It invokes
mlx4_unregister_device() to unregister the device which locks the
intf_mutex and starts removing all associated interfaces.
* Function mlx4_en_remove() gets invoked and starts destroying its first
netdev. This triggers mlx4_en_netdev_event() which recognizes that the
configured bond is broken. It runs mlx4_en_queue_bond_work() which
takes a reference on the netdev. Removing the netdev now cannot
proceed until the work is completed.
* Work function mlx4_en_bond_work() gets scheduled. It calls
mlx4_unbond() -> mlx4_do_bond(). The latter function tries to lock the
intf_mutex but that is not possible because it is held already by
mlx4_unregister_device().
This particular case could be possibly solved by unregistering the
mlx4_en_netdev_event() notifier in mlx4_en_remove() earlier, but it
seems better to decouple mlx4_en more and break this reference order.
Avoid then this scenario by recognizing that the bond reconfiguration
operates only on a mlx4_dev. The logic to queue and execute the bond
work can be moved into the mlx4_core driver. Only a reference on the
respective mlx4_dev object is needed to be taken during the work's
lifetime. This removes a call from mlx4_en that can directly result in
needing to lock the intf_mutex, it remains a privilege of the core
driver.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mlx4_interface.activate callback was introduced in commit
79857cd31fe7 ("net/mlx4: Postpone the registration of net_device"). It
dealt with a situation when a netdev notifier received a NETDEV_REGISTER
event for a new net_device created by mlx4_en but the same device was
not yet visible to mlx4_get_protocol_dev(). The callback can be removed
now that mlx4_get_protocol_dev() is gone.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use a notifier to implement mlx4_dispatch_event() in preparation to
switch mlx4_en and mlx4_ib to be an auxiliary device.
A problem is that if the mlx4_interface.event callback was replaced with
something as mlx4_adrv.event then the implementation of
mlx4_dispatch_event() would need to acquire a lock on a given device
before executing this callback. That is necessary because otherwise
there is no guarantee that the associated driver cannot get unbound when
the callback is running. However, taking this lock is not possible
because mlx4_dispatch_event() can be invoked from the hardirq context.
Using an atomic notifier allows the driver to accurately record when it
wants to receive these events and solves this problem.
A handler registration is done by both mlx4_en and mlx4_ib at the end of
their mlx4_interface.add callback. This matches the current situation
when mlx4_add_device() would enable events for a given device
immediately after this callback, by adding the device on the
mlx4_priv.list.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Function mlx4_dispatch_event() takes an 'unsigned long' as its event
parameter. The actual value is none (MLX4_DEV_EVENT_CATASTROPHIC_ERROR),
a pointer to mlx4_eqe (MLX4_DEV_EVENT_PORT_MGMT_CHANGE), or a 32-bit
integer (remaining events).
In preparation to switch mlx4_en and mlx4_ib to be an auxiliary device,
the mlx4_interface.event callback is replaced with a notifier and
function mlx4_dispatch_event() gets updated to invoke
atomic_notifier_call_chain(). This requires forwarding the input 'param'
value from the former function to the latter. A problem is that the
notifier call takes 'void *' as its 'param' value, compared to
'unsigned long' used by mlx4_dispatch_event(). Re-passing the value
would need either punning it to 'void *' or passing down the address of
the input 'param'. Both approaches create a number of unnecessary casts.
Change instead the input 'param' of mlx4_dispatch_event() from
'unsigned long' to 'void *'. A mlx4_eqe pointer can be passed directly,
callers using an int value are adjusted to pass its address.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rename the mlx4_en_dev.nb notifier_block member to netdev_nb in
preparation to add a mlx4 core notifier_block.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simplify the mlx4 driver interface by removing mlx4_get_protocol_dev()
and the associated mlx4_interface.get_dev callbacks. This is done in
preparation to use an auxiliary bus to model the mlx4 driver structure.
The change is motivated by the following situation:
* The mlx4_en interface is being initialized by mlx4_en_add() and
mlx4_en_activate().
* The latter activate function calls mlx4_en_init_netdev() ->
register_netdev() to register a new net_device.
* A netdev event NETDEV_REGISTER is raised for the device.
* The netdev notififier mlx4_ib_netdev_event() is called and it invokes
mlx4_ib_scan_netdevs() -> mlx4_get_protocol_dev() ->
mlx4_en_get_netdev() [via mlx4_interface.get_dev].
This chain creates a problem when mlx4_en gets switched to be an
auxiliary driver. It contains two device calls which would both need to
take a respective device lock.
Avoid this situation by updating mlx4_ib_scan_netdevs() to no longer
call mlx4_get_protocol_dev() but instead to utilize the information
passed in net_device.parent and net_device.dev_port. This data is
sufficient to determine that an updated port is one that the mlx4_ib
driver should take care of and to keep mlx4_ib_dev.iboe.netdevs up to
date.
Following that, update mlx4_ib_get_netdev() to also not call
mlx4_get_protocol_dev() and instead scan all current netdevs to find
find a matching one. Note that mlx4_ib_get_netdev() is called early from
ib_register_device() and cannot use data tracked in
mlx4_ib_dev.iboe.netdevs which is not at that point yet set.
Finally, remove function mlx4_get_protocol_dev() and the
mlx4_interface.get_dev callbacks (only mlx4_en_get_netdev()) as they
became unused.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 8cd160a29415 ("qede: convert to new udp_tunnel_nic infra")
removed qede_udp_tunnel_{add,del}() but not the declarations.
Commit 0ebcebbef1cc ("qed: Read device port count from the shmem")
removed qed_device_num_engines() but not its declaration.
Commit 1e128c81290a ("qed: Add support for hardware offloaded FCoE.")
declared but never implemented qed_fcoe_set_pf_params().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some of the newer silicon versions in CN10K series supports a feature
where in the current PTP timestamp in HW can be updated atomically
without losing any cpu cycles unlike read/modify/write register.
This patch uses this feature so that PTP accuracy can be improved
while adjusting the master offset in HW. There is no need for SW
timecounter when using this feature. So removed references to SW
timecounter wherever appropriate.
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support TCP as protocol selector for policy and state in IPsec
packet offload mode.
Example of state configuration is as follows:
ip xfrm state add src 192.168.25.3 dst 192.168.25.1 \
proto esp spi 1001 reqid 10001 aead 'rfc4106(gcm(aes))' \
0x54a7588d36873b031e4bd46301be5a86b3a53879 128 mode transport \
offload packet dev re0 dir in sel src 192.168.25.3 dst 192.168.25.1 \
proto tcp dport 9003
Acked-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Support RX policy/state upper protocol selector field offload,
to enable selecting RX traffic for IPsec operation based on l4
protocol UDP with specific source/destination port.
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Instead of using internal devlink_port->index to perform vport lookup in
every devlink port op, store the vport pointer to the container struct
mlx5_devlink_port and use it directly in port ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Since the follow-up patch is going to remove
mlx5_devlink_port_fn_get_vport() entirely, move the vhca_resource_manager
capability checking to individual ops. Add proper extack message
on the way.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
If called from port ops, it is not needed to perform the checks in
mlx5_devlink_eswitch_get(). The reason is devlink port would not be
registered if the checks are not true. Introduce relaxed version
mlx5_devlink_eswitch_nocheck_get() and use it in port ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Instead of initializing "err" variable, just return "-EOPNOTSUPP"
directly where it is needed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
During devlink port init/cleanup and register/unregister calls, there
are many lookups of vport. Instead of passing vport_num as argument to
functions, pass the vport struct pointer directly and avoid repeated
lookups.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Struct devlink_port is usually embedded in a driver-specific struct
which allows to carry driver context to devlink port ops.
Introduce a container struct to include devlink_port struct
in preparation to also include driver context for devlink port ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently each PF/VF/SF devlink port op called into mlx5 code calls
is_port_function_supported() to check if the port is either
PF, VF or SF. So make sure that the ops are registered with devlink
port only for those and avoid the is_port_function_supported() checks
in ops.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Since the previous patch removed the only users of these functions,
remove them.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Similar to the PF/VF helpers, introduce a set of load/unload helpers
for SF vports. From there, call mlx5_eswitch_load/unload_vport() which
are common for PFs/VFs and newly introduced SF helpers.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently there is a separate set of functions used to
register/unregister the SF. The only difference is currently the ops
struct. Move the struct up and use it for SFs in
mlx5_esw_offloads_devlink_port_register().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
devlink_port_register/unregister()
In order to prepare for
mlx5_esw_offloads_devlink_port_register/unregister() to be used
for SFs as well, push out the PF/VF specific init/cleanup calls outside.
Introduce mlx5_eswitch_load/unload_pf_vf_vport() and call them from
there. Use these new helpers of PF/VF loading and make
mlx5_eswitch_local/unload_vport() reusable for SFs.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Similar to what was done for PFs/VFs, introduce devlink port init and
cleanup helpers for SFs and manage the vport->dl_port pointer there.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In order to prepare the devlink port registration function to be common
for PFs/VFs and SFs, change the existing devlink port allocation and
free functions into PF/VF init and cleanup, so similar helpers could be
later on introduced for SFs. Make the init/cleanup helpers responsible
for setting/clearing the vport->dl_port pointer.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The IGC_PTM_CTRL_SHRT_CYC defines the time between two consecutive PTM
requests. The bit resolution of this field is six bits. That bit five was
missing in the mask. This patch comes to correct the typo in the
IGC_PTM_CTRL_SHRT_CYC macro.
Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20230821171721.2203572-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If ptp_clock_register() fails or CONFIG_PTP isn't enabled, avoid starting
PTP related workqueues.
In this way we can fix this:
BUG: unable to handle page fault for address: ffffc9000440b6f8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 1001e0067 PMD 107dc5067 PTE 0
Oops: 0000 [#1] PREEMPT SMP
[...]
Workqueue: events igb_ptp_overflow_check
RIP: 0010:igb_rd32+0x1f/0x60
[...]
Call Trace:
igb_ptp_read_82580+0x20/0x50
timecounter_read+0x15/0x60
igb_ptp_overflow_check+0x1a/0x50
process_one_work+0x1cb/0x3c0
worker_thread+0x53/0x3f0
? rescuer_thread+0x370/0x370
kthread+0x142/0x160
? kthread_associate_blkcg+0xc0/0xc0
ret_from_fork+0x1f/0x30
Fixes: 1f6e8178d685 ("igb: Prevent dropped Tx timestamps via work items and interrupts.")
Fixes: d339b1331616 ("igb: add PTP Hardware Clock code")
Signed-off-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821171927.2203644-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-08-21 (ice)
This series contains updates to ice driver only.
Jesse fixes an issue on calculating buffer size.
Petr Oros reverts a commit that does not fully resolve VF reset issues
and implements one that provides a fuller fix.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix NULL pointer deref during VF reset
Revert "ice: Fix ice VF reset during iavf initialization"
ice: fix receive buffer size miscalculation
====================
Link: https://lore.kernel.org/r/20230821171633.2203505-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While injecting PCIe errors to the upstream PCIe switch of
a BCM57810 NIC, system hangs/crashes were observed.
After several calls to bnx2x_tx_timout() complete,
bnx2x_nic_unload() is called to free up HW resources
and bnx2x_napi_disable() is called to release NAPI objects.
Later, when the EEH driver calls bnx2x_io_slot_reset() to
complete the recovery process, bnx2x attempts to disable
NAPI again by calling bnx2x_napi_disable() and freeing
resources which have already been freed, resulting in a
hang or crash.
Introduce a new flag to track the HW resource and NAPI
allocation state, refactor duplicated code into a single
function, check page pool allocation status before freeing,
and reduces debug output when a TX timeout event occurs.
Reviewed-by: Manish Chopra <manishc@marvell.com>
Tested-by: Abdul Haleem <abdhalee@in.ibm.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Venkata Sai Duggi <venkata.sai.duggi@ibm.com>
Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20230818161443.708785-2-thinhtr@linux.vnet.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit b970ac68e0c4 ("wifi: mac80211_hwsim: check the
return value of nla_put_u32") since it introduced a memory leak in
the error path, which seems worse than sending an incomplete skb,
and the put can't fail anyway since the SKB was just allocated.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The nlmsg_free() ends up calling kfree_skb(), and kfree_skb() is not allowed to be called
from hardware interrupt context or with hardware interrupts being disabled. Replace the
mistaken usage of nlmsg_free() by dev_kfree_skb_irq(), which is safe in both cases.
Signed-off-by: EN-WEI WU <enweiwu@FreeBSD.org>
Link: https://lore.kernel.org/r/20230815095427.13589-1-enweiwu@FreeBSD.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
While technically some control frames like ACK are shorter and
end after Address 1, such frames shouldn't be forwarded through
wmediumd or similar userspace, so require the full 3-address
header to avoid accessing invalid memory if shorter frames are
passed in.
Reported-by: syzbot+b2645b5bf1512b81fa22@syzkaller.appspotmail.com
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Cited commits passed a size to alloc_skb that was only big enough for
the actual packet contents, but the following skb_put + memcpy writes
the whole struct efx_loopback_payload including leading and trailing
padding bytes (which are then stripped off with skb_pull/skb_trim).
This could cause an skb_over_panic, although in practice we get saved
by kmalloc_size_roundup.
Pass the entire size we use, instead of the size of the final packet.
Reported-by: Andy Moreton <andy.moreton@amd.com>
Fixes: cf60ed469629 ("sfc: use padding to fix alignment in loopback test")
Fixes: 30c24dd87f3f ("sfc: siena: use padding to fix alignment in loopback test")
Fixes: 1186c6b31ee1 ("sfc: falcon: use padding to fix alignment in loopback test")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821180153.18652-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-08-16
1) aRFS ethtool stats
Improve aRFS observability by adding new set of counters. Each Rx
ring will have this set of counters listed below.
These counters are exposed through ethtool -S.
1.1) arfs_add: number of times a new rule has been created.
1.2) arfs_request_in: number of times a rule was requested to move from
its current Rx ring to a new Rx ring (incremented on the destination
Rx ring).
1.3) arfs_request_out: number of times a rule was requested to move out
from its current Rx ring (incremented on source/current Rx ring).
1.4) arfs_expired: number of times a rule has been expired by the
kernel and removed from HW.
1.5) arfs_err: number of times a rule creation or modification has
failed.
2) Supporting inline WQE when possible in SW steering
3) Misc cleanups and fixups to net-next branch
* tag 'mlx5-updates-2023-08-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Devcom, only use devcom after NULL check in mlx5_devcom_send_event()
net/mlx5: DR, Supporting inline WQE when possible
net/mlx5: Rename devlink port ops struct for PFs/VFs
net/mlx5: Remove VPORT_UPLINK handling from devlink_port.c
net/mlx5: Call mlx5_esw_offloads_rep_load/unload() for uplink port directly
net/mlx5: Update dead links in Kconfig documentation
net/mlx5: Remove health syndrome enum duplication
net/mlx5: DR, Remove unneeded local variable
net/mlx5: DR, Fix code indentation
net/mlx5: IRQ, consolidate irq and affinity mask allocation
net/mlx5e: Fix spelling mistake "Faided" -> "Failed"
net/mlx5e: aRFS, Introduce ethtool stats
net/mlx5e: aRFS, Warn if aRFS table does not exist for aRFS rule
net/mlx5e: aRFS, Prevent repeated kernel rule migrations requests
====================
Link: https://lore.kernel.org/r/20230821175739.81188-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Two fixes:
- reorder buffer filter checks can cause bad shift/UBSAN
warning with newer HW, avoid the check (mac80211)
- add Kconfig dependency for iwlwifi for PTP clock usage
* tag 'wireless-2023-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: limit reorder_buf_filtered to avoid UBSAN warning
wifi: iwlwifi: mvm: add dependency for PTP clock
====================
Link: https://lore.kernel.org/r/20230822124206.43926-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a hardware reset is triggered on devices not initializing WED the
calls to mtk_wed_fe_reset and mtk_wed_fe_reset_complete dereference a
pointer on uninitialized stack memory.
Break out of both functions in case a hw_list entry is 0.
Fixes: 08a764a7c51b ("net: ethernet: mtk_wed: add reset/reset_complete callbacks")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/5465c1609b464cc7407ae1530c40821dcdf9d3e6.1692634266.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev_queue_xmit_nit() already uses rcu_read_lock() / rcu_read_unlock()
and nothing suggests that softIRQs should be disabled around it.
Therefore, remove the rcu_read_lock_bh() / rcu_read_unlock_bh()
surrounding it.
Tested using [1] with lockdep enabled.
[1]
#!/bin/bash
ip link add name vrf1 up type vrf table 100
ip link add name veth0 type veth peer name veth1
ip link set dev veth1 master vrf1
ip link set dev veth0 up
ip link set dev veth1 up
ip address add 192.0.2.1/24 dev veth0
ip address add 192.0.2.2/24 dev veth1
ip rule add pref 32765 table local
ip rule del pref 0
tcpdump -i vrf1 -c 20 -w /dev/null &
sleep 10
ping -i 0.1 -c 10 -q 192.0.2.2
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230821142339.1889961-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The function is not called from an atomic context so use GFP_KERNEL
instead of GFP_ATOMIC. The allocation of the per-CPU stats is already
performed with GFP_KERNEL.
Tested using test_vxlan_vnifiltering.sh with CONFIG_DEBUG_ATOMIC_SLEEP.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230821141923.1889776-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit e8609e69470f ("net: ethernet: ti: am65-cpsw: Convert to PHYLINK")
removed am65_cpsw_nuss_adjust_link() but not its declaration.
Commit 84640e27f230 ("net: netcp: Add Keystone NetCP core ethernet driver")
declared but never implemented netcp_device_find_module().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230821134029.40084-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 264a9c5c9dff ("net: sparx5: Remove unused GLAG handling in PGID")
removed sparx5_pgid_alloc_glag() but not its declaration.
Commit 27d293cceee5 ("net: microchip: sparx5: Add support for rule count by cookie")
removed vcap_rule_iter() but not its declaration.
Commit 8beef08f4618 ("net: microchip: sparx5: Adding initial VCAP API support")
declared but never implemented vcap_api_set_client().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821135556.43224-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit fbfb8031533c ("ionic: Add hardware init and device commands")
declared but never implemented ionic_q_rewind()/ionic_set_dma_mask().
Commit 969f84394604 ("ionic: sync the filters in the work task")
declared but never implemented ionic_rx_filters_need_sync().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20230821134717.51936-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 6c30384eb1de ("net: mscc: ocelot: register devlink ports")
declared but never implemented ocelot_devlink_init() and
ocelot_devlink_teardown().
Commit 2096805497e2 ("net: mscc: ocelot: automatically detect VCAP constants")
declared but never implemented ocelot_detect_vcap_constants().
Commit 403ffc2c34de ("net: mscc: ocelot: add support for preemptible traffic classes")
declared but never implemented ocelot_port_update_preemptible_tcs().
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230821130218.19096-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 91a98917a883 ("net: dsa: microchip: move switch chip_id detection to ksz_common")
removed ksz8_switch_detect() but not its declaration.
Commit 6ec23aaaac43 ("net: dsa: microchip: move ksz_dev_ops to ksz_common.c")
declared but never implemented other functions.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230821125501.19624-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit b57ba3b2f7b0 ("ath9k: move ath9k_reload_chainmask_settings to common")
removed the implementation ath9k_reload_chainmask_settings() but not the declaration.
Also commit 978f78bf7137 ("ath9k_hw: Move bt_stomp to hw from common.") left behind
ath9k_cmn_btcoex_bt_stomp() declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230810145222.34364-1-yuehaibing@huawei.com
|
|
Ther are a little ternary operators, the true or false judgement
of which is unnecessary in C language semantics.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230731124455.2039184-1-ruanjinjie@huawei.com
|
|
Use 'kstrtoul_from_user()' and 'kstrtobool_from_user()'
where appropriate and thus avoid some code duplication.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230726185046.188225-1-dmantipov@yandex.ru
|
|
Make IS_ERR() judge the debugfs_create_dir() function return
in ath9k_init_debug()
Signed-off-by: Minjie Du <duminjie@vivo.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230712114740.13226-1-duminjie@vivo.com
|
|
If ath9k_wmi_cmd() has exited with a timeout, it is possible that during
next ath9k_wmi_cmd() call the wmi_rsp callback for previous wmi command
writes to new wmi->cmd_rsp_buf and makes a completion. This results in an
invalid ath9k_wmi_cmd() return value.
Move the replacement of WMI command response buffer and length under
wmi_lock. Note that last_seq_id value is updated there, too.
Thus, the buffer cannot be written to by a belated wmi_rsp callback
because that path is properly rejected by the last_seq_id check.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230425192607.18015-2-pchelkin@ispras.ru
|
|
Currently, the synchronization between ath9k_wmi_cmd() and
ath9k_wmi_ctrl_rx() is exposed to a race condition which, although being
rather unlikely, can lead to invalid behaviour of ath9k_wmi_cmd().
Consider the following scenario:
CPU0 CPU1
ath9k_wmi_cmd(...)
mutex_lock(&wmi->op_mutex)
ath9k_wmi_cmd_issue(...)
wait_for_completion_timeout(...)
---
timeout
---
/* the callback is being processed
* before last_seq_id became zero
*/
ath9k_wmi_ctrl_rx(...)
spin_lock_irqsave(...)
/* wmi->last_seq_id check here
* doesn't detect timeout yet
*/
spin_unlock_irqrestore(...)
/* last_seq_id is zeroed to
* indicate there was a timeout
*/
wmi->last_seq_id = 0
mutex_unlock(&wmi->op_mutex)
return -ETIMEDOUT
ath9k_wmi_cmd(...)
mutex_lock(&wmi->op_mutex)
/* the buffer is replaced with
* another one
*/
wmi->cmd_rsp_buf = rsp_buf
wmi->cmd_rsp_len = rsp_len
ath9k_wmi_cmd_issue(...)
spin_lock_irqsave(...)
spin_unlock_irqrestore(...)
wait_for_completion_timeout(...)
/* the continuation of the
* callback left after the first
* ath9k_wmi_cmd call
*/
ath9k_wmi_rsp_callback(...)
/* copying data designated
* to already timeouted
* WMI command into an
* inappropriate wmi_cmd_buf
*/
memcpy(...)
complete(&wmi->cmd_wait)
/* awakened by the bogus callback
* => invalid return result
*/
mutex_unlock(&wmi->op_mutex)
return 0
To fix this, update last_seq_id on timeout path inside ath9k_wmi_cmd()
under the wmi_lock. Move ath9k_wmi_rsp_callback() under wmi_lock inside
ath9k_wmi_ctrl_rx() so that the wmi->cmd_wait can be completed only for
initially designated wmi_cmd call, otherwise the path would be rejected
with last_seq_id check.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230425192607.18015-1-pchelkin@ispras.ru
|
|
There is no need to call the dev_err() function directly to print a custom
message when handling an error from platform_get_irq() function as it is
going to display an appropriate error message in case of a failure.
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230726171235.2475625-1-ruanjinjie@huawei.com
|
|
Andrew reported a bonding issue that if we put an active-back bond on top
of a 802.3ad bond interface. When the 802.3ad bond's speed/duplex changed
dynamically. The upper bonding interface's speed/duplex can't be changed at
the same time, which will show incorrect speed.
Fix it by updating the port speed when calling ethtool.
Reported-by: Andrew Schorr <ajschorr@alumni.princeton.edu>
Closes: https://lore.kernel.org/netdev/ZEt3hvyREPVdbesO@Laptop-X1/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20230821101008.797482-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
