summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2023-03-29bnxt_en: Fix typo in PCI id to device description string mappingKalesh AP
Fix 57502 and 57508 NPAR description string entries. The typos caused these devices to not match up with lspci output. Fixes: 49c98421e6ab ("bnxt_en: Add PCI IDs for 57500 series NPAR devices.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29bnxt_en: Fix reporting of test result in ethtool selftestKalesh AP
When the selftest command fails, driver is not reporting the failure by updating the "test->flags" when bnxt_close_nic() fails. Fixes: eb51365846bc ("bnxt_en: Add basic ethtool -t selftest support.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29i40e: fix registers dump after run ethtool adapter self testRadoslaw Tyl
Fix invalid registers dump from ethtool -d ethX after adapter self test by ethtool -t ethY. It causes invalid data display. The problem was caused by overwriting i40e_reg_list[].elements which is common for ethtool self test and dump. Fixes: 22dd9ae8afcc ("i40e: Rework register diagnostic") Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230328172659.3906413-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-28 (ice) This series contains updates to ice driver only. Jesse fixes mismatched header documentation reported when building with W=1. Brett restricts setting of VSI context to only applicable fields for the given ICE_AQ_VSI_PROP_Q_OPT_VALID bit. Junfeng adds check when adding Flow Director filters that conflict with existing filter rules. Jakob Koschel adds interim variable for iterating to prevent possible misuse after looping. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: fix invalid check for empty list in ice_sched_assoc_vsi_to_agg() ice: add profile conflict check for AVF FDIR ice: Fix ice_cfg_rdma_fltr() to only update relevant fields ice: fix W=1 headers mismatch ==================== Link: https://lore.kernel.org/r/20230328172035.3904953-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29Merge tag 'ieee802154-for-net-2023-03-29' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan Stefan Schmidt says: ==================== ieee802154 for net 2023-03-29 Two small fixes this time. Dongliang Mu removed an unnecessary null pointer check. Harshit Mogalapalli fixed an int comparison unsigned against signed from a recent other fix in the ca8210 driver. * tag 'ieee802154-for-net-2023-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan: net: ieee802154: remove an unnecessary null pointer check ca8210: Fix unsigned mac_len comparison with zero in ca8210_skb_tx() ==================== Link: https://lore.kernel.org/r/20230329064541.2147400-1-stefan@datenfreihafen.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29bnx2x: use the right build_skb() helperJakub Kicinski
build_skb() no longer accepts slab buffers. Since slab use is fairly uncommon we prefer the drivers to call a separate slab_build_skb() function appropriately. bnx2x uses the old semantics where size of 0 meant buffer from slab. It sets the fp->rx_frag_size to 0 for MTUs which don't fit in a page. It needs to call slab_build_skb(). This fixes the WARN_ONCE() of incorrect API use seen with bnx2x. Reported-by: Thomas Voegtle <tv@lio96.de> Link: https://lore.kernel.org/all/b8f295e4-ba57-8bfb-7d9c-9d62a498a727@lio96.de/ Fixes: ce098da1497c ("skbuff: Introduce slab_build_skb()") Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230329000013.2734957-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29net: ipa: compute DMA pool size properlyAlex Elder
In gsi_trans_pool_init_dma(), the total size of a pool of memory used for DMA transactions is calculated. However the calculation is done incorrectly. For 4KB pages, this total size is currently always more than one page, and as a result, the calculation produces a positive (though incorrect) total size. The code still works in this case; we just end up with fewer DMA pool entries than we intended. Bjorn Andersson tested booting a kernel with 16KB pages, and hit a null pointer derereference in sg_alloc_append_table_from_pages(), descending from gsi_trans_pool_init_dma(). The cause of this was that a 16KB total size was going to be allocated, and with 16KB pages the order of that allocation is 0. The total_size calculation yielded 0, which eventually led to the crash. Correcting the total_size calculation fixes the problem. Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com> Tested-by: Bjorn Andersson <quic_bjorande@quicinc.com> Fixes: 9dd441e4ed57 ("soc: qcom: ipa: GSI transactions") Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230328162751.2861791-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-29net: wwan: iosm: fixes 7560 modem crashM Chetan Kumar
ModemManger/Apps probing the wwan0xmmrpc0 port for 7560 Modem results in modem crash. 7560 Modem FW uses the MBIM interface for control command communication whereas 7360 uses Intel RPC interface so disable wwan0xmmrpc0 port for 7560. Fixes: d08b0f8f46e4 ("net: wwan: iosm: add rpc interface for xmm modems") Reported-and-tested-by: Martin <mwolf@adiumentum.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217200 Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: Shane Parslow <shaneparslow808@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-28net: ethernet: mtk_eth_soc: fix tx throughput regression with direct 1G linksFelix Fietkau
Using the QDMA tx scheduler to throttle tx to line speed works fine for switch ports, but apparently caused a regression on non-switch ports. Based on a number of tests, it seems that this throttling can be safely dropped without re-introducing the issues on switch ports that the tx scheduling changes resolved. Link: https://lore.kernel.org/netdev/trinity-92c3826f-c2c8-40af-8339-bc6d0d3ffea4-1678213958520@3c-app-gmx-bs16/ Fixes: f63959c7eec3 ("net: ethernet: mtk_eth_soc: implement multi-queue support for per-port queues") Reported-by: Frank Wunderlich <frank-w@public-files.de> Reported-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230324140404.95745-1-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-28ice: fix invalid check for empty list in ice_sched_assoc_vsi_to_agg()Jakob Koschel
The code implicitly assumes that the list iterator finds a correct handle. If 'vsi_handle' is not found the 'old_agg_vsi_info' was pointing to an bogus memory location. For safety a separate list iterator variable should be used to make the != NULL check on 'old_agg_vsi_info' correct under any circumstances. Additionally Linus proposed to avoid any use of the list iterator variable after the loop, in the attempt to move the list iterator variable declaration into the macro to avoid any potential misuse after the loop. Using it in a pointer comparison after the loop is undefined behavior and should be omitted if possible [1]. Fixes: 37c592062b16 ("ice: remove the VSI info from previous agg") Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel <jkl820.git@gmail.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-28ice: add profile conflict check for AVF FDIRJunfeng Guo
Add profile conflict check while adding some FDIR rules to avoid unexpected flow behavior, rules may have conflict including: IPv4 <---> {IPv4_UDP, IPv4_TCP, IPv4_SCTP} IPv6 <---> {IPv6_UDP, IPv6_TCP, IPv6_SCTP} For example, when we create an FDIR rule for IPv4, this rule will work on packets including IPv4, IPv4_UDP, IPv4_TCP and IPv4_SCTP. But if we then create an FDIR rule for IPv4_UDP and then destroy it, the first FDIR rule for IPv4 cannot work on pkt IPv4_UDP then. To prevent this unexpected behavior, we add restriction in software when creating FDIR rules by adding necessary profile conflict check. Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF") Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-28ice: Fix ice_cfg_rdma_fltr() to only update relevant fieldsBrett Creeley
The current implementation causes ice_vsi_update() to update all VSI fields based on the cached VSI context. This also assumes that the ICE_AQ_VSI_PROP_Q_OPT_VALID bit is set. This can cause problems if the VSI context is not correctly synced by the driver. Fix this by only updating the fields that correspond to ICE_AQ_VSI_PROP_Q_OPT_VALID. Also, make sure to save the updated result in the cached VSI context on success. Fixes: 348048e724a0 ("ice: Implement iidc operations") Co-developed-by: Robert Malz <robertx.malz@intel.com> Signed-off-by: Robert Malz <robertx.malz@intel.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Tested-by: Jakub Andrysiak <jakub.andrysiak@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-28ice: fix W=1 headers mismatchJesse Brandeburg
make modules W=1 returns: .../ice/ice_txrx_lib.c:448: warning: Function parameter or member 'first_idx' not described in 'ice_finalize_xdp_rx' .../ice/ice_txrx.c:948: warning: Function parameter or member 'ntc' not described in 'ice_get_rx_buf' .../ice/ice_txrx.c:1038: warning: Excess function parameter 'rx_buf' description in 'ice_construct_skb' Fix these warnings by adding and deleting the deviant arguments. Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side") Fixes: d7956d81f150 ("ice: Pull out next_to_clean bump out of ice_put_rx_buf()") CC: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-28xen/netback: remove not needed test in xenvif_tx_build_gops()Juergen Gross
The tests for the number of grant mapping or copy operations reaching the array size of the operations buffer at the end of the main loop in xenvif_tx_build_gops() isn't needed. The loop can handle at maximum MAX_PENDING_REQS transfer requests, as XEN_RING_NR_UNCONSUMED_REQUESTS() is taking unsent responses into consideration, too. Remove the tests. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28xen/netback: don't do grant copy across page boundaryJuergen Gross
Fix xenvif_get_requests() not to do grant copy operations across local page boundaries. This requires to double the maximum number of copy operations per queue, as each copy could now be split into 2. Make sure that struct xenvif_tx_cb doesn't grow too large. Cc: stable@vger.kernel.org Fixes: ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28smsc911x: avoid PHY being resumed when interface is not upWolfram Sang
SMSC911x doesn't need mdiobus suspend/resume, that's why it sets 'mac_managed_pm'. However, setting it needs to be moved from init to probe, so mdiobus PM functions will really never be called (e.g. when the interface is not up yet during suspend/resume). Fixes: 3ce9f2bef755 ("net: smsc911x: Stop and start PHY during suspend and resume") Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230327083138.6044-1-wsa+renesas@sang-engineering.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28net: mvpp2: parser fix PPPoESven Auhagen
In PPPoE add all IPv4 header option length to the parser and adjust the L3 and L4 offset accordingly. Currently the L4 match does not work with PPPoE and all packets are matched as L3 IP4 OPT. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28net: mvpp2: parser fix QinQSven Auhagen
The mvpp2 parser entry for QinQ has the inner and outer VLAN in the wrong order. Fix the problem by swapping them. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Reviewed-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-28net: mvpp2: classifier flow fix fragmentation flagsSven Auhagen
Add missing IP Fragmentation Flag. Fixes: f9358e12a0af ("net: mvpp2: split ingress traffic into multiple flows") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Reviewed-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-27net: stmmac: don't reject VLANs when IFF_PROMISC is setVladimir Oltean
The blamed commit has introduced the following tests to dwmac4_add_hw_vlan_rx_fltr(), called from stmmac_vlan_rx_add_vid(): if (hw->promisc) { netdev_err(dev, "Adding VLAN in promisc mode not supported\n"); return -EPERM; } "VLAN promiscuous" mode is keyed in this driver to IFF_PROMISC, and so, vlan_vid_add() and vlan_vid_del() calls cannot take place in IFF_PROMISC mode. I have the following 2 arguments that this restriction is.... hm, how shall I put it nicely... unproductive :) First, take the case of a Linux bridge. If the kernel is compiled with CONFIG_BRIDGE_VLAN_FILTERING=y, then this bridge shall have a VLAN database. The bridge shall try to call vlan_add_vid() on its bridge ports for each VLAN in the VLAN table. It will do this irrespectively of whether that port is *currently* VLAN-aware or not. So it will do this even when the bridge was created with vlan_filtering 0. But the Linux bridge, in VLAN-unaware mode, configures its ports in promiscuous (IFF_PROMISC) mode, so that they accept packets with any MAC DA (a switch must do this in order to forward those packets which are not directly targeted to its MAC address). As a result, the stmmac driver does not work as a bridge port, when the kernel is compiled with CONFIG_BRIDGE_VLAN_FILTERING=y. $ ip link add br0 type bridge && ip link set br0 up $ ip link set eth0 master br0 && ip link set eth0 up [ 2333.943296] br0: port 1(eth0) entered blocking state [ 2333.943381] br0: port 1(eth0) entered disabled state [ 2333.943782] device eth0 entered promiscuous mode [ 2333.944080] 4033c000.ethernet eth0: Adding VLAN in promisc mode not supported [ 2333.976509] 4033c000.ethernet eth0: failed to initialize vlan filtering on this port RTNETLINK answers: Operation not permitted Secondly, take the case of stmmac as DSA master. Some switch tagging protocols are based on 802.1Q VLANs (tag_sja1105.c), and as such, tag_8021q.c uses vlan_vid_add() to work with VLAN-filtering DSA masters. But also, when a DSA port becomes promiscuous (for example when it joins a bridge), the DSA framework also makes the DSA master promiscuous. Moreover, for every VLAN that a DSA switch sends to the CPU, DSA also programs a VLAN filter on the DSA master, because if the the DSA switch uses a tail tag, then the hardware frame parser of the DSA master will see VLAN as VLAN, and might filter them out, for being unknown. Due to the above 2 reasons, my belief is that the stmmac driver does not get to choose to not accept vlan_vid_add() calls while IFF_PROMISC is enabled, because the 2 are completely independent and there are code paths in the network stack which directly lead to this situation occurring, without the user's direct input. In fact, my belief is that "VLAN promiscuous" mode should have never been keyed on IFF_PROMISC in the first place, but rather, on the NETIF_F_HW_VLAN_CTAG_FILTER feature flag which can be toggled by the user through ethtool -k, when present in netdev->hw_features. In the stmmac driver, NETIF_F_HW_VLAN_CTAG_FILTER is only present in "features", making this feature "on [fixed]". I have this belief because I am unaware of any definition of promiscuity which implies having an effect on anything other than MAC DA (therefore not VLAN). However, I seem to be rather alone in having this opinion, looking back at the disagreements from this discussion: https://lore.kernel.org/netdev/20201110153958.ci5ekor3o2ekg3ky@ipetronik.com/ In any case, to remove the vlan_vid_add() dependency on !IFF_PROMISC, one would need to remove the check and see what fails. I guess the test was there because of the way in which dwmac4_vlan_promisc_enable() is implemented. For context, the dwmac4 supports Perfect Filtering for a limited number of VLANs - dwmac4_get_num_vlan(), priv->hw->num_vlan, with a fallback on Hash Filtering - priv->dma_cap.vlhash - see stmmac_vlan_update(), also visible in cat /sys/kernel/debug/stmmaceth/eth0/dma_cap | grep 'VLAN Hash Filtering'. The perfect filtering is based on MAC_VLAN_Tag_Filter/MAC_VLAN_Tag_Data registers, accessed in the driver through dwmac4_write_vlan_filter(). The hash filtering is based on the MAC_VLAN_Hash_Table register, named GMAC_VLAN_HASH_TABLE in the driver and accessed by dwmac4_update_vlan_hash(). The control bit for enabling hash filtering is GMAC_VLAN_VTHM (MAC_VLAN_Tag_Ctrl bit VTHM: VLAN Tag Hash Table Match Enable). Now, the description of dwmac4_vlan_promisc_enable() is that it iterates through the driver's cache of perfect filter entries (hw->vlan_filter[i], added by dwmac4_add_hw_vlan_rx_fltr()), and evicts them from hardware by unsetting their GMAC_VLAN_TAG_DATA_VEN (MAC_VLAN_Tag_Data bit VEN - VLAN Tag Enable) bit. Then it unsets the GMAC_VLAN_VTHM bit, which disables hash matching. This leaves the MAC, according to table "VLAN Match Status" from the documentation, to always enter these data paths: VID |VLAN Perfect Filter |VTHM Bit |VLAN Hash Filter |Final VLAN Match |Match Result | |Match Result |Status -------|--------------------|---------|-----------------|---------------- VID!=0 |Fail |0 |don't care |Pass So, dwmac4_vlan_promisc_enable() does its job, but by unsetting GMAC_VLAN_VTHM, it conflicts with the other code path which controls this bit: dwmac4_update_vlan_hash(), called through stmmac_update_vlan_hash() from stmmac_vlan_rx_add_vid() and from stmmac_vlan_rx_kill_vid(). This is, I guess, why dwmac4_add_hw_vlan_rx_fltr() is not allowed to run after dwmac4_vlan_promisc_enable() has unset GMAC_VLAN_VTHM: because if it did, then dwmac4_update_vlan_hash() would set GMAC_VLAN_VTHM again, breaking the "VLAN promiscuity". It turns out that dwmac4_vlan_promisc_enable() is way too complicated for what needs to be done. The MAC_Packet_Filter register also has the VTFE bit (VLAN Tag Filter Enable), which simply controls whether VLAN tagged packets which don't match the filtering tables (either perfect or hash) are dropped or not. At the moment, this driver unconditionally sets GMAC_PACKET_FILTER_VTFE if NETIF_F_HW_VLAN_CTAG_FILTER was detected through the priv->dma_cap.vlhash capability bits of the device, in stmmac_dvr_probe(). I would suggest deleting the unnecessarily complex logic from dwmac4_vlan_promisc_enable(), and simply unsetting GMAC_PACKET_FILTER_VTFE when becoming IFF_PROMISC, which has the same effect of allowing packets with any VLAN tags, but has the additional benefit of being able to run concurrently with stmmac_vlan_rx_add_vid() and stmmac_vlan_rx_kill_vid(). As much as I believe that the VTFE bit should have been exclusively controlled by NETIF_F_HW_VLAN_CTAG_FILTER through ethtool, and not by IFF_PROMISC, changing that is not a punctual fix to the problem, and it would probably break the VFFQ feature added by the later commit e0f9956a3862 ("net: stmmac: Add option for VLAN filter fail queue enable"). From the commit description, VFFQ needs IFF_PROMISC=on and VTFE=off in order to work (and this change respects that). But if VTFE was changed to be controlled through ethtool -k, then a user-visible change would have been introduced in Intel's scripts (a need to run "ethtool -k eth0 rx-vlan-filter off" which did not exist before). The patch was tested with this set of commands: ip link set eth0 up ip link add link eth0 name eth0.100 type vlan id 100 ip addr add 192.168.100.2/24 dev eth0.100 && ip link set eth0.100 up ip link set eth0 promisc on ip link add link eth0 name eth0.101 type vlan id 101 ip addr add 192.168.101.2/24 dev eth0.101 && ip link set eth0.101 up ip link set eth0 promisc off ping -c 5 192.168.100.1 ping -c 5 192.168.101.1 ip link set eth0 promisc on ping -c 5 192.168.100.1 ping -c 5 192.168.101.1 ip link del eth0.100 ip link del eth0.101 # Wait for VLAN-tagged pings from the other end... # Check with "tcpdump -i eth0 -e -n -p" and we should see them ip link set eth0 promisc off # Wait for VLAN-tagged pings from the other end... # Check with "tcpdump -i eth0 -e -n -p" and we shouldn't see them # anymore, but remove the "-p" argument from tcpdump and they're there. Fixes: c89f44ff10fd ("net: stmmac: Add support for VLAN promiscuous mode") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: dsa: b53: mmap: add phy opsÁlvaro Fernández Rojas
Implement phy_read16() and phy_write16() ops for B53 MMAP to avoid accessing B53_PORT_MII_PAGE registers which hangs the device. This access should be done through the MDIO Mux bus controller. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: phy: micrel: correct KSZ9131RNX EEE capabilities and advertisementOleksij Rempel
The KSZ9131RNX incorrectly shows EEE capabilities in its registers. Although the "EEE control and capability 1" (Register 3.20) is set to 0, indicating no EEE support, the "EEE advertisement 1" (Register 7.60) is set to 0x6, advertising EEE support for 1000BaseT/Full and 100BaseT/Full. This inconsistency causes PHYlib to assume there is no EEE support, preventing control over EEE advertisement, which is enabled by default. This patch resolves the issue by utilizing the ksz9477_get_features() function to correctly set the EEE capabilities for the KSZ9131RNX. This adjustment allows proper control over EEE advertisement and ensures accurate representation of the device's capabilities. Fixes: 8b68710a3121 ("net: phy: start using genphy_c45_ethtool_get/set_eee()") Reported-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: phy: constify fwnode_get_phy_node() fwnode argumentRussell King (Oracle)
fwnode_get_phy_node() does not motify the fwnode structure, so make the argument const, Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sfp: constify sfp-bus internal fwnode usesRussell King (Oracle)
Constify sfp-bus internal fwnode uses, since we do not modify the fwnode structures. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net: sfp: make sfp_bus_find_fwnode() take a const fwnodeRussell King (Oracle)
sfp_bus_find_fwnode() does not write to the fwnode, so let's make it const. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-27net/net_failover: fix txq exceeding warningFaicker Mo
The failover txq is inited as 16 queues. when a packet is transmitted from the failover device firstly, the failover device will select the queue which is returned from the primary device if the primary device is UP and running. If the primary device txq is bigger than the default 16, it can lead to the following warning: eth0 selects TX queue 18, but real number of TX queues is 16 The warning backtrace is: [ 32.146376] CPU: 18 PID: 9134 Comm: chronyd Tainted: G E 6.2.8-1.el7.centos.x86_64 #1 [ 32.147175] Hardware name: Red Hat KVM, BIOS 1.10.2-3.el7_4.1 04/01/2014 [ 32.147730] Call Trace: [ 32.147971] <TASK> [ 32.148183] dump_stack_lvl+0x48/0x70 [ 32.148514] dump_stack+0x10/0x20 [ 32.148820] netdev_core_pick_tx+0xb1/0xe0 [ 32.149180] __dev_queue_xmit+0x529/0xcf0 [ 32.149533] ? __check_object_size.part.0+0x21c/0x2c0 [ 32.149967] ip_finish_output2+0x278/0x560 [ 32.150327] __ip_finish_output+0x1fe/0x2f0 [ 32.150690] ip_finish_output+0x2a/0xd0 [ 32.151032] ip_output+0x7a/0x110 [ 32.151337] ? __pfx_ip_finish_output+0x10/0x10 [ 32.151733] ip_local_out+0x5e/0x70 [ 32.152054] ip_send_skb+0x19/0x50 [ 32.152366] udp_send_skb.isra.0+0x163/0x3a0 [ 32.152736] udp_sendmsg+0xba8/0xec0 [ 32.153060] ? __folio_memcg_unlock+0x25/0x60 [ 32.153445] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 32.153854] ? sock_has_perm+0x85/0xa0 [ 32.154190] inet_sendmsg+0x6d/0x80 [ 32.154508] ? inet_sendmsg+0x6d/0x80 [ 32.154838] sock_sendmsg+0x62/0x70 [ 32.155152] ____sys_sendmsg+0x134/0x290 [ 32.155499] ___sys_sendmsg+0x81/0xc0 [ 32.155828] ? _get_random_bytes.part.0+0x79/0x1a0 [ 32.156240] ? ip4_datagram_release_cb+0x5f/0x1e0 [ 32.156649] ? get_random_u16+0x69/0xf0 [ 32.156989] ? __fget_light+0xcf/0x110 [ 32.157326] __sys_sendmmsg+0xc4/0x210 [ 32.157657] ? __sys_connect+0xb7/0xe0 [ 32.157995] ? __audit_syscall_entry+0xce/0x140 [ 32.158388] ? syscall_trace_enter.isra.0+0x12c/0x1a0 [ 32.158820] __x64_sys_sendmmsg+0x24/0x30 [ 32.159171] do_syscall_64+0x38/0x90 [ 32.159493] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fix that by reducing txq number as the non-existent primary-dev does. Fixes: cfc80d9a1163 ("net: Introduce net_failover driver") Signed-off-by: Faicker Mo <faicker.mo@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-25r8169: fix RTL8168H and RTL8107E rx crc errorChunHao Lin
When link speed is 10 Mbps and temperature is under -20°C, RTL8168H and RTL8107E may have rx crc error. Disable phy 10 Mbps pll off to fix this issue. Fixes: 6e1d0b898818 ("r8169:add support for RTL8168H and RTL8107E") Signed-off-by: ChunHao Lin <hau@realtek.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-25net: dsa: microchip: ksz8: fix MDB configuration with non-zero VIDOleksij Rempel
FID is directly mapped to VID. However, configuring a MAC address with a VID != 0 resulted in incorrect configuration due to an incorrect bit mask. This kernel commit fixed the issue by correcting the bit mask and ensuring proper configuration of MAC addresses with non-zero VID. Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-25net: dsa: microchip: ksz8863_smi: fix bulk accessOleksij Rempel
Current regmap bulk access is broken, resulting to wrong reads/writes if ksz_read64/ksz_write64 functions are used. Mostly this issue was visible by using ksz8_fdb_dump(), which returned corrupt MAC address. The reason is that regmap was configured to have max_raw_read/write, even if ksz8863_mdio_read/write functions are able to handle unlimited read/write accesses. On ksz_read64 function we are using multiple 32bit accesses by incrementing each access by 1 instead of 4. Resulting buffer had 01234567.12345678 instead of 01234567.89abcdef. We have multiple ways to fix it: - enable 4 byte alignment for 32bit accesses. Since the HW do not have this requirement. It will break driver. - disable max_raw_* limit. This patch is removing max_raw_* limit for regmap accesses in ksz8863_smi. Fixes: 60a364760002 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-25net: dsa: microchip: ksz8: ksz8_fdb_dump: avoid extracting ghost entry from ↵Oleksij Rempel
empty dynamic MAC table. If the dynamic MAC table is empty, we will still extract one outdated entry. Fix it by using correct bit offset. Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-25net: dsa: microchip: ksz8: fix offset for the timestamp filedOleksij Rempel
We are using wrong offset, so we will get not a timestamp. Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-25net: dsa: microchip: ksz8: fix ksz8_fdb_dump() to extract all 1024 entriesOleksij Rempel
Current ksz8_fdb_dump() is able to extract only max 249 entries on the ksz8863/ksz8873 series of switches. This happened due to wrong bit mask and offset calculation. This commit corrects the issue and allows for the complete extraction of all 1024 entries. Fixes: 4b20a07e103f ("net: dsa: microchip: ksz8795: add support for ksz88xx chips") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-25net: dsa: microchip: ksz8: fix ksz8_fdb_dump()Oleksij Rempel
Before this patch, the ksz8_fdb_dump() function had several issues, such as uninitialized variables and incorrect usage of source port as a bit mask. These problems caused inaccurate reporting of vid information and port assignment in the bridge fdb. Fixes: e587be759e6e ("net: dsa: microchip: update fdb add/del/dump in ksz_common") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-24vmxnet3: use gro callback when UPT is enabledRonak Doshi
Currently, vmxnet3 uses GRO callback only if LRO is disabled. However, on smartNic based setups where UPT is supported, LRO can be enabled from guest VM but UPT devicve does not support LRO as of now. In such cases, there can be performance degradation as GRO is not being done. This patch fixes this issue by calling GRO API when UPT is enabled. We use updateRxProd to determine if UPT mode is active or not. To clarify few things discussed over the thread: The patch is not neglecting any feature bits nor disabling GRO. It uses GRO callback when UPT is active as LRO is not available in UPT. GRO callback cannot be used as default for all cases as it degrades performance for non-UPT cases or for cases when LRO is already done in ESXi. Cc: stable@vger.kernel.org Fixes: 6f91f4ba046e ("vmxnet3: add support for capability registers") Signed-off-by: Ronak Doshi <doshir@vmware.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230323200721.27622-1-doshir@vmware.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-24net: dsa: realtek: fix out-of-bounds accessAhmad Fatoum
The probe function sets priv->chip_data to (void *)priv + sizeof(*priv) with the expectation that priv has enough trailing space. However, only realtek-smi actually allocated this chip_data space. Do likewise in realtek-mdio to fix out-of-bounds accesses. These accesses likely went unnoticed so far, because of an (unused) buf[4096] member in struct realtek_priv, which caused kmalloc to round up the allocated buffer to a big enough size, so nothing of value was overwritten. With a different allocator (like in the barebox bootloader port of the driver) or with KASAN, the memory corruption becomes quickly apparent. Fixes: aac94001067d ("net: dsa: realtek: add new mdio interface for drivers") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/20230323103735.2331786-1-a.fatoum@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-24net: phy: dp83869: fix default value for tx-/rx-internal-delayJosua Mayer
dp83869 internally uses a look-up table for mapping supported delays in nanoseconds to register values. When specific delays are defined in device-tree, phy_get_internal_delay does the lookup automatically returning an index. The default case wrongly assigns the nanoseconds value from the lookup table, resulting in numeric value 2000 applied to delay configuration register, rather than the expected index values 0-7 (7 for 2000). Ultimately this issue broke RX for 1Gbps links. Fix default delay configuration by assigning the intended index value directly. Cc: stable@vger.kernel.org Fixes: 736b25afe284 ("net: dp83869: Add RGMII internal delay configuration") Co-developed-by: Yazan Shhady <yazan.shhady@solid-run.com> Signed-off-by: Yazan Shhady <yazan.shhady@solid-run.com> Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230323102536.31988-1-josua@solid-run.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-24sfc: ef10: don't overwrite offload features at NIC resetÍñigo Huguet
At NIC reset, some offload features related to encapsulated traffic might have changed (this mainly happens if the firmware-variant is changed with the sfboot userspace tool). Because of this, features are checked and set again at reset time. However, this was not done right, and some features were improperly overwritten at NIC reset: - Tunneled IPv6 segmentation was always disabled - Features disabled with ethtool were reenabled - Features that becomes unsupported after the reset were not disabled Also, checking if the device supports IPV6_CSUM to enable TSO6 is no longer necessary because all currently supported devices support it. Additionally, move the assignment of some other features to the EF10_OFFLOAD_FEATURES macro, like it is done in ef100, leaving the selection of features in efx_pci_probe_post_io a bit cleaner. Fixes: ffffd2454a7a ("sfc: correctly advertise tunneled IPv6 segmentation") Fixes: 24b2c3751aa3 ("sfc: advertise encapsulated offloads on EF10") Reported-by: Tianhao Zhao <tizhao@redhat.com> Suggested-by: Jonathan Cooper <jonathan.s.cooper@amd.com> Tested-by: Jonathan Cooper <jonathan.s.cooper@amd.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/20230323083417.7345-1-ihuguet@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-24net: wangxun: Fix vector length of interrupt causeJiawen Wu
There is 64-bit interrupt cause register for txgbe. Fix to clear upper 32 bits. Fixes: 3f703186113f ("net: libwx: Add irq flow functions") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230322103632.132011-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-03-23 We've added 8 non-merge commits during the last 13 day(s) which contain a total of 21 files changed, 238 insertions(+), 161 deletions(-). The main changes are: 1) Fix verification issues in some BPF programs due to their stack usage patterns, from Eduard Zingerman. 2) Fix to add missing overflow checks in xdp_umem_reg and return an error in such case, from Kal Conley. 3) Fix and undo poisoning of strlcpy in libbpf given it broke builds for libcs which provided the former like uClibc-ng, from Jesus Sanchez-Palencia. 4) Fix insufficient bpf_jit_limit default to avoid users running into hard to debug seccomp BPF errors, from Daniel Borkmann. 5) Fix driver return code when they don't support a bpf_xdp_metadata kfunc to make it unambiguous from other errors, from Jesper Dangaard Brouer. 6) Two BPF selftest fixes to address compilation errors from recent changes in kernel structures, from Alexei Starovoitov. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver support bpf: Adjust insufficient default bpf_jit_limit xsk: Add missing overflow check in xdp_umem_reg selftests/bpf: Fix progs/test_deny_namespace.c issues. selftests/bpf: Fix progs/find_vma_fail1.c build error. libbpf: Revert poisoning of strlcpy selftests/bpf: Tests for uninitialized stack reads bpf: Allow reads from uninit stack ==================== Link: https://lore.kernel.org/r/20230323225221.6082-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23Merge tag 'wireless-2023-03-23' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.3 Third set of fixes for v6.3. mt76 has two kernel crash fixes and adding back 160 MHz channel support for mt7915. mac80211 has fixes for a race in transmit path and two mesh related fixes. iwlwifi also has fixes for races. * tag 'wireless-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix mesh path discovery based on unicast packets wifi: mac80211: fix qos on mesh interfaces wifi: iwlwifi: mvm: protect TXQ list manipulation wifi: iwlwifi: mvm: fix mvmtxq->stopped handling wifi: mac80211: Serialize ieee80211_handle_wake_tx_queue() wifi: mwifiex: mark OF related data as maybe unused wifi: mt76: connac: do not check WED status for non-mmio devices wifi: mt76: mt7915: add back 160MHz channel width support for MT7915 wifi: mt76: do not run mt76_unregister_device() on unregistered hw ==================== Link: https://lore.kernel.org/r/20230323110332.C4FE4C433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23net: mdio: thunder: Add missing fwnode_handle_put()Liang He
In device_for_each_child_node(), we should add fwnode_handle_put() when break out of the iteration device_for_each_child_node() as it will automatically increase and decrease the refcounter. Fixes: 379d7ac7ca31 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-22Merge tag 'mlx5-fixes-2023-03-21' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2023-03-21 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: E-Switch, Fix an Oops in error handling code net/mlx5: Read the TC mapping of all priorities on ETS query net/mlx5e: Overcome slow response for first macsec ASO WQE net/mlx5e: Initialize link speed to zero net/mlx5: Fix steering rules cleanup net/mlx5e: Block entering switchdev mode with ns inconsistency net/mlx5e: Set uplink rep as NETNS_LOCAL ==================== Link: https://lore.kernel.org/r/20230321211135.47711-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-21 (ice) This series contains updates to ice driver only. Piotr sets first_desc field for proper handling of Flow Director packets. Michal moves error checking for VF earlier in function to properly return error before other checks/reporting; he also corrects VSI filter removal to be done during VSI removal and not rebuild. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: remove filters only if VSI is deleted ice: check if VF exists before mode check ice: fix rx buffers handling for flow director packets ==================== Link: https://lore.kernel.org/r/20230321183641.2849726-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-21 (iavf, i40e) This series contains updates to iavf and i40e drivers. Stefan Assmann adds check, and return, if driver has already gone through remove to prevent hang for iavf. Radoslaw adds zero initialization to ensure Flow Director packets are populated with correct values for i40e. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: fix flow director packet filter programming iavf: fix hang on reboot with ice ==================== Link: https://lore.kernel.org/r/20230321183548.2849671-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22net: dsa: mt7530: move setting ssc_delta to PHY_INTERFACE_MODE_TRGMII caseArınç ÜNAL
Move setting the ssc_delta variable to under the PHY_INTERFACE_MODE_TRGMII case as it's only needed when trgmii is used. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230320190520.124513-3-arinc.unal@arinc9.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup()Arınç ÜNAL
Move lowering the TRGMII Tx clock driving to mt7530_setup(), after setting the core clock, as seen on the U-Boot MediaTek ethernet driver. Move the code which looks like it lowers the TRGMII Rx clock driving to after the TRGMII Tx clock driving is lowered. This is run after lowering the Tx clock driving on the U-Boot MediaTek ethernet driver as well. This way, the switch should consume less power regardless of port 6 being used. Update the comment explaining mt7530_pad_clk_setup(). Tested rgmii and trgmii modes of port 6 and rgmii mode of port 5 on MCM MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI Bananapi BPI-R2. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Link: https://source.denx.de/u-boot/u-boot/-/blob/29a48bf9ccba45a5e560bb564bbe76e42629325f/drivers/net/mtk_eth.c#L682 Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230320190520.124513-2-arinc.unal@arinc9.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup()Arınç ÜNAL
Split the code that enables and disables TRGMII clocks and core clock. Move enabling and disabling core clock to mt7530_pll_setup() as it's supposed to be run there. Add 20 ms delay before enabling the core clock as seen on the U-Boot MediaTek ethernet driver. Change the comment for enabling and disabling TRGMII clocks as the code seems to affect both TXC and RXC. Tested rgmii and trgmii modes of port 6 and rgmii mode of port 5 on MCM MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI Bananapi BPI-R2. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Link: https://source.denx.de/u-boot/u-boot/-/blob/29a48bf9ccba45a5e560bb564bbe76e42629325f/drivers/net/mtk_eth.c#L589 Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230320190520.124513-1-arinc.unal@arinc9.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22net: asix: fix modprobe "sysfs: cannot create duplicate filename"Grant Grundler
"modprobe asix ; rmmod asix ; modprobe asix" fails with: sysfs: cannot create duplicate filename \ '/devices/virtual/mdio_bus/usb-003:004' Issue was originally reported by Anton Lundin on 2022-06-22 (link below). Chrome OS team hit the same issue in Feb, 2023 when trying to find work arounds for other issues with AX88172 devices. The use of devm_mdiobus_register() with usbnet devices results in the MDIO data being associated with the USB device. When the asix driver is unloaded, the USB device continues to exist and the corresponding "mdiobus_unregister()" is NOT called until the USB device is unplugged or unauthorized. So the next "modprobe asix" will fail because the MDIO phy sysfs attributes still exist. The 'easy' (from a design PoV) fix is to use the non-devm variants of mdiobus_* functions and explicitly manage this use in the asix_bind and asix_unbind function calls. I've not explored trying to fix usbnet initialization so devm_* stuff will work. Fixes: e532a096be0e5 ("net: usb: asix: ax88772: add phylib support") Reported-by: Anton Lundin <glance@acc.umu.se> Link: https://lore.kernel.org/netdev/20220623063649.GD23685@pengutronix.de/T/ Tested-by: Eizan Miyamoto <eizan@chromium.org> Signed-off-by: Grant Grundler <grundler@chromium.org> Link: https://lore.kernel.org/r/20230321170539.732147-1-grundler@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22gve: Cache link_speed value from deviceJoshua Washington
The link speed is never changed for the uptime of a VM, and the current implementation sends an admin queue command for each call. Admin queue command invocations have nontrivial overhead (e.g., VM exits), which can be disruptive to users if triggered frequently. Our telemetry data shows that there are VMs that make frequent calls to this admin queue command. Caching the result of the original admin queue command would eliminate the need to send multiple admin queue commands on subsequent calls to retrieve link speed. Fixes: 7e074d5a76ca ("gve: Enable Link Speed Reporting in the driver.") Signed-off-by: Joshua Washington <joshwash@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230321172332.91678-1-joshwash@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-22net: enetc: fix aggregate RMON counters not showing the rangesVladimir Oltean
When running "ethtool -S eno0 --groups rmon" without an explicit "--src emac|pmac" argument, the kernel will not report rx-rmon-etherStatsPkts64to64Octets, rx-rmon-etherStatsPkts65to127Octets, etc. This is because on ETHTOOL_MAC_STATS_SRC_AGGREGATE, we do not populate the "ranges" argument. ocelot_port_get_rmon_stats() does things differently and things work there. I had forgotten to make sure that the code is structured the same way in both drivers, so do that now. Fixes: cf52bd238b75 ("net: enetc: add support for MAC Merge statistics counters") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230321232831.1200905-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-04-01 23:54:20 +0000