summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2021-09-15net: lantiq: configure the burst length in ethernet driversAleksander Jan Bajkowski
Configure the burst length in Ethernet drivers. This improves Ethernet performance by 58%. According to the vendor BSP, 8W burst length is supported by ar9 and newer SoCs. The NAT benchmark results on xRX200 (Down/Up): * 2W: 330 Mb/s * 4W: 432 Mb/s 372 Mb/s * 8W: 520 Mb/s 389 Mb/s Tested on xRX200 and xRX330. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14net: hns3: PF support get multicast MAC address space assigned by firmwareGuangbin Huang
The new firmware supports to divides the whole multicast MAC address space equally to functions of all PFs, and calculates the space size of each PF according to its function number. To support this feature, PF driver adds querying multicast MAC address space size from firmware and limits used number according to space size. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14net: hns3: PF support get unicast MAC address space assigned by firmwareGuangbin Huang
Currently, there are two ways for PF to set the unicast MAC address space size: specified by config parameters in firmware or set to default value. That's mean if the config parameters in firmware is zero, driver will divide the whole unicast MAC address space equally to 8 PFs. However, in this case, the unicast MAC address space will be wasted a lot when the hardware actually has less then 8 PFs. And in the other hand, if one PF has much more VFs than other PFs, then each function of this PF will has much less address space than other PFs. In order to ameliorate the above two situations, introduce the third way of unicast MAC address space assignment: firmware divides the whole unicast MAC address space equally to functions of all PFs, and calculates the space size of each PF according to its function number. PF queries the space size by the querying device specification command when in initialization process. The third way assignment is lower priority than specified by config parameters, only if the config parameters is zero can be used, and if firmware does not support the third way assignment, then driver still divides the whole unicast MAC address space equally to 8 PFs. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14net: phy: at803x: add support for qca 8327 internal phyAnsuel Smith
Add support for qca8327 internal phy needed for correct init of the switch port. It does use the same qca8337 function and reg just with a different id. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Rosen Penev <rosenp@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14net: wwan: iosm: fix linux-next build errorM Chetan Kumar
Removed "stdbool.h" inclusion in iosm_ipc_imem.h Fixes: 13bb8429ca98 ("net: wwan: iosm: firmware flashing and coredump collection") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14r8169: remove support for chip version RTL_GIGA_MAC_VER_27Heiner Kallweit
This patch is a follow-up to beb401ec5006 ("r8169: deprecate support for RTL_GIGA_MAC_VER_27") that came with 5.12. Nobody complained, so let's remove support for this chip version. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14mlxsw: reg: Remove PMTM registerJiri Pirko
It is not used anymore, remove it. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14mlxsw: spectrum: Use PMTDB register to obtain split infoJiri Pirko
Newly introduced PMTDB register is there to provide all needed info about particular requested port split configuration. Use it instead of figuring the info out manually in the driver. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14mlxsw: reg: Add Port Module To local DataBase RegisterJiri Pirko
The PMTDB register allows to query the possible module<->local port mapping than can be used in PMLP. It does not represent the actual/current mapping of the local to module. Actual mapping is only defined by PMLP. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14mlxsw: spectrum: Use PLLP to get front panel number and split numberJiri Pirko
Instead of relying on the values coming from the PMLP register, use PLLP to get the information about port front panel number and split number. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14mlxsw: reg: Add Port Local port to Label Port mapping RegisterJiri Pirko
The PLLP register returns the mapping from Local Port into Label Port. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14mlxsw: spectrum: Move port SWID set before core port initJiri Pirko
During port creation, mlxsw_core_port_init() is called with the front panel port number and the split port sub-number. Currently, this information is determined by the driver without firmware assistance. Subsequent patches are going to query this information from firmware, but this requires the port to assigned to SWID. Therefore, move port SWID assignment before mlxsw_core_port_init(). Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14mlxsw: spectrum: Move port module mapping before core port initJiri Pirko
During port creation, mlxsw_core_port_init() is called with the front panel port number and the split port sub-number. Currently, this information is determined by the driver without firmware assistance. Subsequent patches are going to query this information from firmware, but this requires the port to be mapped to a module. Therefore, move port mapping before mlxsw_core_port_init(). Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14mlxsw: spectrum: Bump minimum FW version to xx.2008.3326Jiri Pirko
Add latest verified version of Nvidia Spectrum-family switch firmware, for Spectrum (13.2008.3326), Spectrum-2 (29.2008.3326) and Spectrum-3 (30.2008.3326). Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13net: wwan: iosm: firmware flashing and coredump collectionM Chetan Kumar
This patch brings-in support for M.2 7560 Device firmware flashing & coredump collection using devlink. - Driver Registers with Devlink framework. - Register devlink params callback for configuring device params required in flashing or coredump flow. - Implements devlink ops flash_update callback that programs modem firmware. - Creates region & snapshot required for device coredump log collection. On early detection of device in boot rom stage. Driver registers with Devlink framework and establish transport channel for PSI (Primary Signed Image) injection. Once PSI is injected to device, the device execution stage details are read to determine whether device is in flash or exception mode. The collected information is reported to devlink user space application & based on this informationi, application proceeds with either modem firmware flashing or coredump collection. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13nfp: Prefer struct_size over open coded arithmeticLen Baker
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13qed: Improve the stack space of filter_config()Shai Malin
As it was reported and discussed in: https://lore.kernel.org/lkml/CAHk-=whF9F89vsfH8E9TGc0tZA-yhzi2Di8wOtquNB5vRkFX5w@mail.gmail.com/ This patch improves the stack space of qede_config_rx_mode() by splitting filter_config() to 3 functions and removing the union qed_filter_type_params. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07Merge tag 'net-5.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes and stragglers from Jakub Kicinski: "Networking stragglers and fixes, including changes from netfilter, wireless and can. Current release - regressions: - qrtr: revert check in qrtr_endpoint_post(), fixes audio and wifi - ip_gre: validate csum_start only on pull - bnxt_en: fix 64-bit doorbell operation on 32-bit kernels - ionic: fix double use of queue-lock, fix a sleeping in atomic - can: c_can: fix null-ptr-deref on ioctl() - cs89x0: disable compile testing on powerpc Current release - new code bugs: - bridge: mcast: fix vlan port router deadlock, consistently disable BH Previous releases - regressions: - dsa: tag_rtl4_a: fix egress tags, only port 0 was working - mptcp: fix possible divide by zero - netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex - netfilter: socket: icmp6: fix use-after-scope - stmmac: fix MAC not working when system resume back with WoL active Previous releases - always broken: - ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address - seg6: set fc_nlinfo in nh_create_ipv4, nh_create_ipv6 - mptcp: only send extra TCP acks in eligible socket states - dsa: lantiq_gswip: fix maximum frame length - stmmac: fix overall budget calculation for rxtx_napi - bnxt_en: fix firmware version reporting via devlink - renesas: sh_eth: add missing barrier to fix freeing wrong tx descriptor Stragglers: - netfilter: conntrack: switch to siphash - netfilter: refuse insertion if chain has grown too large - ncsi: add get MAC address command to get Intel i210 MAC address" * tag 'net-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits) ieee802154: Remove redundant initialization of variable ret net: stmmac: fix MAC not working when system resume back with WoL active net: phylink: add suspend/resume support net: renesas: sh_eth: Fix freeing wrong tx descriptor bonding: 3ad: pass parameter bond_params by reference cxgb3: fix oops on module removal can: c_can: fix null-ptr-deref on ioctl() can: rcar_canfd: add __maybe_unused annotation to silence warning net: wwan: iosm: Unify IO accessors used in the driver net: wwan: iosm: Replace io.*64_lo_hi() with regular accessors net: qcom/emac: Replace strlcpy with strscpy ip6_gre: Revert "ip6_gre: add validation for csum_start" net: hns3: make hclgevf_cmd_caps_bit_map0 and hclge_cmd_caps_bit_map0 static selftests/bpf: Test XDP bonding nest and unwind bonding: Fix negative jump label count on nested bonding MAINTAINERS: add VM SOCKETS (AF_VSOCK) entry stmmac: dwmac-loongson:Fix missing return value iwlwifi: fix printk format warnings in uefi.c net: create netdev->dev_addr assignment helpers bnxt_en: Fix possible unintended driver initiated error recovery ...
2021-09-07net: stmmac: fix MAC not working when system resume back with WoL activeJoakim Zhang
We can reproduce this issue with below steps: 1) enable WoL on the host 2) host system suspended 3) remote client send out wakeup packets We can see that host system resume back, but can't work, such as ping failed. After a bit digging, this issue is introduced by the commit 46f69ded988d ("net: stmmac: Use resolved link config in mac_link_up()"), which use the finalised link parameters in mac_link_up() rather than the parameters in mac_config(). There are two scenarios for MAC suspend/resume in STMMAC driver: 1) MAC suspend with WoL inactive, stmmac_suspend() call phylink_mac_change() to notify phylink machine that a change in MAC state, then .mac_link_down callback would be invoked. Further, it will call phylink_stop() to stop the phylink instance. When MAC resume back, firstly phylink_start() is called to start the phylink instance, then call phylink_mac_change() which will finally trigger phylink machine to invoke .mac_config and .mac_link_up callback. All is fine since configuration in these two callbacks will be initialized, that means MAC can restore the state. 2) MAC suspend with WoL active, phylink_mac_change() will put link down, but there is no phylink_stop() to stop the phylink instance, so it will link up again, that means .mac_config and .mac_link_up would be invoked before system suspended. After system resume back, it will do DMA initialization and SW reset which let MAC lost the hardware setting (i.e MAC_Configuration register(offset 0x0) is reset). Since link is up before system suspended, so .mac_link_up would not be invoked after system resume back, lead to there is no chance to initialize the configuration in .mac_link_up callback, as a result, MAC can't work any longer. After discussed with Russell King [1], we confirm that phylink framework have not take WoL into consideration yet. This patch calls phylink_suspend()/phylink_resume() functions which is newly introduced by Russell King to fix this issue. [1] https://lore.kernel.org/netdev/20210901090228.11308-1-qiangqing.zhang@nxp.com/ Fixes: 46f69ded988d ("net: stmmac: Use resolved link config in mac_link_up()") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07net: phylink: add suspend/resume supportRussell King (Oracle)
Joakim Zhang reports that Wake-on-Lan with the stmmac ethernet driver broke when moving the incorrect handling of mac link state out of mac_config(). This reason this breaks is because the stmmac's WoL is handled by the MAC rather than the PHY, and phylink doesn't cater for that scenario. This patch adds the necessary phylink code to handle suspend/resume events according to whether the MAC still needs a valid link or not. This is the barest minimum for this support. Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com> Tested-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07net: renesas: sh_eth: Fix freeing wrong tx descriptorYoshihiro Shimoda
The cur_tx counter must be incremented after TACT bit of txdesc->status was set. However, a CPU is possible to reorder instructions and/or memory accesses between cur_tx and txdesc->status. And then, if TX interrupt happened at such a timing, the sh_eth_tx_free() may free the descriptor wrongly. So, add wmb() before cur_tx++. Otherwise NETDEV WATCHDOG timeout is possible to happen. Fixes: 86a74ff21a7a ("net: sh_eth: add support for Renesas SuperH Ethernet") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07bonding: 3ad: pass parameter bond_params by referenceColin Ian King
The parameter bond_params is a relatively large 192 byte sized struct so pass it by reference rather than by value to reduce copying. Addresses-Coverity: ("Big parameter passed by value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07Merge tag 'linux-can-fixes-for-5.15-20210907' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can linux-can-fixes-for-5.15-20210907 Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07Merge tag 'wireless-drivers-2021-09-07' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.15 First set of fixes for v5.15 and only iwlwifi patches this time. Most important being support for new hardware and new firmware API. I had already earlier applied a fix which also Linus applied to this tree as commit 1476ff21abb4 ("iwl: fix debug printf format strings"), but this doesn't seem to cause any conflicts so I left it there. iwlwifi * add support for firmware API 66 * add support for Samsung Galaxy Book Flex2 Alpha * fix a leak happening every time module is loaded * fix a printk compiler warning ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07cxgb3: fix oops on module removalHeiner Kallweit
When removing the driver module w/o bringing an interface up before the error below occurs. Reason seems to be that cancel_work_sync() is called in t3_sge_stop() for a queue that hasn't been initialized yet. [10085.941785] ------------[ cut here ]------------ [10085.941799] WARNING: CPU: 1 PID: 5850 at kernel/workqueue.c:3074 __flush_work+0x3ff/0x480 [10085.941819] Modules linked in: vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio led_class ee1004 iTCO_ wdt intel_tcc_cooling x86_pkg_temp_thermal coretemp aesni_intel crypto_simd cryptd snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core r 8169 snd_pcm realtek mdio_devres snd_timer snd i2c_i801 i2c_smbus libphy i915 i2c_algo_bit cxgb3(-) intel_gtt ttm mdio drm_kms_helper mei_me s yscopyarea sysfillrect sysimgblt mei fb_sys_fops acpi_pad sch_fq_codel crypto_user drm efivarfs ext4 mbcache jbd2 crc32c_intel [10085.941944] CPU: 1 PID: 5850 Comm: rmmod Not tainted 5.14.0-rc7-next-20210826+ #6 [10085.941974] Hardware name: System manufacturer System Product Name/PRIME H310I-PLUS, BIOS 2603 10/21/2019 [10085.941992] RIP: 0010:__flush_work+0x3ff/0x480 [10085.942003] Code: c0 74 6b 65 ff 0d d1 bd 78 75 e8 bc 2f 06 00 48 c7 c6 68 b1 88 8a 48 c7 c7 e0 5f b4 8b 45 31 ff e8 e6 66 04 00 e9 4b fe ff ff <0f> 0b 45 31 ff e9 41 fe ff ff e8 72 c1 79 00 85 c0 74 87 80 3d 22 [10085.942036] RSP: 0018:ffffa1744383fc08 EFLAGS: 00010246 [10085.942048] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000923 [10085.942062] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff91c901710a88 [10085.942076] RBP: ffffa1744383fce8 R08: 0000000000000001 R09: 0000000000000001 [10085.942090] R10: 00000000000000c2 R11: 0000000000000000 R12: ffff91c901710a88 [10085.942104] R13: 0000000000000000 R14: ffff91c909a96100 R15: 0000000000000001 [10085.942118] FS: 00007fe417837740(0000) GS:ffff91c969d00000(0000) knlGS:0000000000000000 [10085.942134] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10085.942146] CR2: 000055a8d567ecd8 CR3: 0000000121690003 CR4: 00000000003706e0 [10085.942160] Call Trace: [10085.942166] ? __lock_acquire+0x3af/0x22e0 [10085.942177] ? cancel_work_sync+0xb/0x10 [10085.942187] __cancel_work_timer+0x128/0x1b0 [10085.942197] ? __pm_runtime_resume+0x5b/0x90 [10085.942208] cancel_work_sync+0xb/0x10 [10085.942217] t3_sge_stop+0x2f/0x50 [cxgb3] [10085.942234] remove_one+0x26/0x190 [cxgb3] [10085.942248] pci_device_remove+0x39/0xa0 [10085.942258] __device_release_driver+0x15e/0x240 [10085.942269] driver_detach+0xd9/0x120 [10085.942278] bus_remove_driver+0x53/0xd0 [10085.942288] driver_unregister+0x2c/0x50 [10085.942298] pci_unregister_driver+0x31/0x90 [10085.942307] cxgb3_cleanup_module+0x10/0x18c [cxgb3] [10085.942324] __do_sys_delete_module+0x191/0x250 [10085.942336] ? syscall_enter_from_user_mode+0x21/0x60 [10085.942347] ? trace_hardirqs_on+0x2a/0xe0 [10085.942357] __x64_sys_delete_module+0x13/0x20 [10085.942368] do_syscall_64+0x40/0x90 [10085.942377] entry_SYSCALL_64_after_hwframe+0x44/0xae [10085.942389] RIP: 0033:0x7fe41796323b Fixes: 5e0b8928927f ("net:cxgb3: replace tasklets with works") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07can: c_can: fix null-ptr-deref on ioctl()Tong Zhang
The pdev maybe not a platform device, e.g. c_can_pci device, in this case, calling to_platform_device() would not make sense. Also, per the comment in drivers/net/can/c_can/c_can_ethtool.c, @bus_info should match dev_name() string, so I am replacing this with dev_name() to fix this issue. [ 1.458583] BUG: unable to handle page fault for address: 0000000100000000 [ 1.460921] RIP: 0010:strnlen+0x1a/0x30 [ 1.466336] ? c_can_get_drvinfo+0x65/0xb0 [c_can] [ 1.466597] ethtool_get_drvinfo+0xae/0x360 [ 1.466826] dev_ethtool+0x10f8/0x2970 [ 1.467880] sock_ioctl+0xef/0x300 Fixes: 2722ac986e93 ("can: c_can: add ethtool support") Link: https://lore.kernel.org/r/20210906233704.1162666-1-ztong0001@gmail.com Cc: stable@vger.kernel.org # 5.14+ Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-09-07can: rcar_canfd: add __maybe_unused annotation to silence warningMarc Kleine-Budde
Since commit | dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") the rcar_canfd driver can be compile tested on all architectures. On non OF enabled archs, or archs where OF is optional (and disabled in the .config) the compilation throws the following warning: | drivers/net/can/rcar/rcar_canfd.c:2020:34: warning: unused variable 'rcar_canfd_of_table' [-Wunused-const-variable] | static const struct of_device_id rcar_canfd_of_table[] = { | ^ This patch fixes the warning by marking the variable rcar_canfd_of_table as __maybe_unused. Fixes: ac4224087312 ("can: rcar: Kconfig: Add helper dependency on COMPILE_TEST") Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") Link: https://lore.kernel.org/all/20210907064537.1054268-1-mkl@pengutronix.de Cc: linux-renesas-soc@vger.kernel.org Cc: Cai Huoqing <caihuoqing@baidu.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-09-06iwl: fix debug printf format stringsLinus Torvalds
The variable 'package_size' is an unsigned long, and should be printed out using '%lu', not '%zd' (that would be for a size_t). Yes, on many architectures (including x86-64), 'size_t' is in fact the same type as 'long', but that's a fairly random architecture definition, and on some platforms 'size_t' is in fact 'int' rather than 'long'. That is the case on traditional 32-bit x86. Yes, both types are the exact same 32-bit size, and it would all print out perfectly correctly, but '%zd' ends up still being wrong. And we can't make 'package_size' be a 'size_t', because we get the actual value using efivar_entry_get() that takes a pointer to an 'unsigned long'. So '%lu' it is. This fixes two of the i386 allmodconfig build warnings (that is now an error due to -Werror). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-06net: wwan: iosm: Unify IO accessors used in the driverAndy Shevchenko
Currently we have readl()/writel()/ioread*()/iowrite*() APIs in use. Let's unify to use only ioread*()/iowrite*() variants. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-06net: wwan: iosm: Replace io.*64_lo_hi() with regular accessorsAndy Shevchenko
The io.*_lo_hi() variants are not strictly needed on the x86 hardware and especially the PCI bus. Replace them with regular accessors, but leave headers in place in case of 32-bit build. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-06net: qcom/emac: Replace strlcpy with strscpyJason Wang
The strlcpy should not be used because it doesn't limit the source length. As linus says, it's a completely useless function if you can't implicitly trust the source string - but that is almost always why people think they should use it! All in all the BSD function will lead some potential bugs. But the strscpy doesn't require reading memory from the src string beyond the specified "count" bytes, and since the return value is easier to error-check than strlcpy()'s. In addition, the implementation is robust to the string changing out from underneath it, unlike the current strlcpy() implementation. Thus, We prefer using strscpy instead of strlcpy. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-06net: hns3: make hclgevf_cmd_caps_bit_map0 and hclge_cmd_caps_bit_map0 staticchongjiapeng
This symbols is not used outside of hclge_cmd.c and hclgevf_cmd.c, so marks it static. Fix the following sparse warning: drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c:345:35: warning: symbol 'hclgevf_cmd_caps_bit_map0' was not declared. Should it be static? drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c:365:33: warning: symbol 'hclge_cmd_caps_bit_map0' was not declared. Should it be static? Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: chongjiapeng <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-06bonding: Fix negative jump label count on nested bondingJussi Maki
With nested bonding devices the nested bond device's ndo_bpf was called without a program causing it to decrement the static key without a prior increment leading to negative count. Fix the issue by 1) only calling slave's ndo_bpf when there's a program to be loaded and 2) only decrement the count when a program is unloaded. Fixes: 9e2ee5c7e7c3 ("net, bonding: Add XDP support to the bonding driver") Reported-by: syzbot+30622fb04ddd72a4d167@syzkaller.appspotmail.com Signed-off-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-06stmmac: dwmac-loongson:Fix missing return valuezhaoxiao
Add the return value when phy_mode < 0. Signed-off-by: zhaoxiao <long870912@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-06iwlwifi: fix printk format warnings in uefi.cRandy Dunlap
The kernel test robot reports printk format warnings in uefi.c, so correct them. ../drivers/net/wireless/intel/iwlwifi/fw/uefi.c: In function 'iwl_uefi_get_pnvm': ../drivers/net/wireless/intel/iwlwifi/fw/uefi.c:52:30: warning: format '%zd' expects argument of type 'signed size_t', but argument 7 has type 'long unsigned int' [-Wformat=] 52 | "PNVM UEFI variable not found %d (len %zd)\n", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 53 | err, package_size); | ~~~~~~~~~~~~ | | | long unsigned int ../drivers/net/wireless/intel/iwlwifi/fw/uefi.c:59:29: warning: format '%zd' expects argument of type 'signed size_t', but argument 6 has type 'long unsigned int' [-Wformat=] 59 | IWL_DEBUG_FW(trans, "Read PNVM from UEFI with size %zd\n", package_size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~ | | | long unsigned int Fixes: 84c3c9952afb ("iwlwifi: move UEFI code to a separate file") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: linux-wireless@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210821020901.25901-1-rdunlap@infradead.org
2021-09-05bnxt_en: Fix possible unintended driver initiated error recoveryMichael Chan
If error recovery is already enabled, bnxt_timer() will periodically check the heartbeat register and the reset counter. If we get an error recovery async. notification from the firmware (e.g. change in primary/secondary role), we will immediately read and update the heartbeat register and the reset counter. If the timer for the next health check expires soon after this, we may read the heartbeat register again in quick succession and find that it hasn't changed. This will trigger error recovery unintentionally. The likelihood is small because we also reset fw_health->tmr_counter which will reset the interval for the next health check. But the update is not protected and bnxt_timer() can miss the update and perform the health check without waiting for the full interval. Fix it by only reading the heartbeat register and reset counter in bnxt_async_event_process() if error recovery is trasitioning to the enabled state. Also add proper memory barriers so that when enabling for the first time, bnxt_timer() will see the tmr_counter interval and perform the health check after the full interval has elapsed. Fixes: 7e914027f757 ("bnxt_en: Enable health monitoring.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-05bnxt_en: Fix UDP tunnel logicMichael Chan
The current logic assumes that when the driver sends the message to the firmware to add the VXLAN or Geneve port, the firmware will never fail the operation. The UDP ports are always stored and are used to check the tunnel packets in .ndo_features_check(). These tunnnel packets will fail to offload on the transmit side if firmware fails the call to add the UDP ports. To fix the problem, bp->vxlan_port and bp->nge_port will only be set to the offloaded ports when the HWRM_TUNNEL_DST_PORT_ALLOC firmware call succeeds. When deleting a UDP port, we check that the port was previously added successfuly first by checking the FW ID. Fixes: 1698d600b361 ("bnxt_en: Implement .ndo_features_check().") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-05bnxt_en: Fix asic.rev in devlink dev info commandMichael Chan
The current asic.rev is incomplete and does not include the metal revision. Add the metal revision and decode the complete asic revision into the more common and readable form (A0, B0, etc). Fixes: 7154917a12b2 ("bnxt_en: Refactor bnxt_dl_info_get().") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-05bnxt_en: fix read of stored FW_PSID version on P5 devicesEdwin Peer
P5 devices store NVM arrays using a different internal representation. This implementation detail permeates into the HWRM API, requiring the caller to explicitly index the array elements in HWRM_NVM_GET_VARIABLE on these devices. Conversely, older devices do not support the indexed mode of operation and require reading the raw NVM content. Fixes: db28b6c77f40 ("bnxt_en: Fix devlink info's stored fw.psid version format.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-05bnxt_en: fix stored FW_PSID version masksEdwin Peer
The FW_PSID version components are 8 bits wide, not 4. Fixes: db28b6c77f40 ("bnxt_en: Fix devlink info's stored fw.psid version format.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-05net: dsa: b53: Fix IMP port setup on BCM5301xRafał Miłecki
Broadcom's b53 switches have one IMP (Inband Management Port) that needs to be programmed using its own designed register. IMP port may be different than CPU port - especially on devices with multiple CPU ports. For that reason it's required to explicitly note IMP port index and check for it when choosing a register to use. This commit fixes BCM5301x support. Those switches use CPU port 5 while their IMP port is 8. Before this patch b53 was trying to program port 5 with B53_PORT_OVERRIDE_CTRL instead of B53_GMII_PORT_OVERRIDE_CTRL(5). It may be possible to also replace "cpu_port" usages with dsa_is_cpu_port() but that is out of the scope of thix BCM5301x fix. Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-05bonding: complain about missing route only once for A/B ARP probesDavid Decotigny
On configs where there is no confirgured direct route to the target of the ARP probes, these probes are still sent and may be replied to properly, so no need to repeatedly complain about the missing route. Signed-off-by: David Decotigny <ddecotig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-05net: stmmac: Fix overall budget calculation for rxtx_napiSong Yoong Siang
tx_done is not used for napi_complete_done(). Thus, NAPI busy polling mechanism by gro_flush_timeout and napi_defer_hard_irqs will not able be triggered after a packet is transmitted when there is no receive packet. Fix this by taking the maximum value between tx_done and rx_done as overall budget completed by the rxtx NAPI poll to ensure XDP Tx ZC operation is continuously polling for next Tx frame. This gives benefit of lower packet submission processing latency and jitter under XDP Tx ZC mode. Performance of tx-only using xdp-sock on Intel ADL-S platform is the same with and without this patch. root@intel-corei7-64:~# ./xdpsock -i enp0s30f4 -t -z -q 1 -n 10 sock0@enp0s30f4:1 txonly xdp-drv pps pkts 10.00 rx 0 0 tx 511630 8659520 sock0@enp0s30f4:1 txonly xdp-drv pps pkts 10.00 rx 0 0 tx 511625 13775808 sock0@enp0s30f4:1 txonly xdp-drv pps pkts 10.00 rx 0 0 tx 511619 18892032 Fixes: 132c32ee5bc0 ("net: stmmac: Add TX via XDP zero-copy socket") Cc: <stable@vger.kernel.org> # 5.13.x Co-developed-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-05iwlwifi: pnvm: Fix a memory leak in 'iwl_pnvm_get_from_fs()'Christophe JAILLET
A firmware is requested but never released in this function. This leads to a memory leak in the normal execution path. Add the missing 'release_firmware()' call. Also introduce a temp variable (new_len) in order to keep the value of 'pnvm->size' after the firmware has been released. Fixes: cdda18fbbefa ("iwlwifi: pnvm: move file loading code to a separate function") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Luca Coelho <luca@coelho.fi> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1b5d80f54c1dbf85710fd285243932943b498fe7.1630614969.git.christophe.jaillet@wanadoo.fr
2021-09-04octeontx2-af: Fix some memory leaks in the error handling path of ↵Christophe JAILLET
'cgx_lmac_init()' Memory allocated before 'lmac' is stored in 'cgx->lmac_idmap[]' must be freed explicitly. Otherwise, in case of error, it will leak. Rename the 'err_irq' label to better describe what is done at this place in the error handling path. Fixes: 6f14078e3ee5 ("octeontx2-af: DMAC filter support in MAC block") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-04octeontx2-af: Add a 'rvu_free_bitmap()' functionChristophe JAILLET
In order to match 'rvu_alloc_bitmap()', add a 'rvu_free_bitmap()' function Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-04ethtool: Fix an error code in cxgb2.cYang Li
When adapter->registered_device_map is NULL, the value of err is uncertain, we set err to -EINVAL to avoid ambiguity. Clean up smatch warning: drivers/net/ethernet/chelsio/cxgb/cxgb2.c:1114 init_one() warn: missing error code 'err' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-04qlcnic: Remove redundant unlock in qlcnic_pinit_from_romDinghao Liu
Previous commit 68233c583ab4 removes the qlcnic_rom_lock() in qlcnic_pinit_from_rom(), but remains its corresponding unlock function, which is odd. I'm not very sure whether the lock is missing, or the unlock is redundant. This bug is suggested by a static analysis tool, please advise. Fixes: 68233c583ab4 ("qlcnic: updated reset sequence") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-03ionic: fix a sleeping in atomic bugDan Carpenter
This code is holding spin_lock_bh(&lif->rx_filters.lock); so the allocation needs to be atomic. Fixes: 969f84394604 ("ionic: sync the filters in the work task") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20210903131856.GA25934@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-03Merge tag 'kbuild-v5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add -s option (strict mode) to merge_config.sh to make it fail when any symbol is redefined. - Show a warning if a different compiler is used for building external modules. - Infer --target from ARCH for CC=clang to let you cross-compile the kernel without CROSS_COMPILE. - Make the integrated assembler default (LLVM_IAS=1) for CC=clang. - Add <linux/stdarg.h> to the kernel source instead of borrowing <stdarg.h> from the compiler. - Add Nick Desaulniers as a Kbuild reviewer. - Drop stale cc-option tests. - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG to handle symbols in inline assembly. - Show a warning if 'FORCE' is missing for if_changed rules. - Various cleanups * tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kbuild: redo fake deps at include/ksym/*.h kbuild: clean up objtool_args slightly modpost: get the *.mod file path more simply checkkconfigsymbols.py: Fix the '--ignore' option kbuild: merge vmlinux_link() between ARCH=um and other architectures kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh kbuild: merge vmlinux_link() between the ordinary link and Clang LTO kbuild: remove stale *.symversions kbuild: remove unused quiet_cmd_update_lto_symversions gen_compile_commands: extract compiler command from a series of commands x86: remove cc-option-yn test for -mtune= arc: replace cc-option-yn uses with cc-option s390: replace cc-option-yn uses with cc-option ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild sparc: move the install rule to arch/sparc/Makefile security: remove unneeded subdir-$(CONFIG_...) kbuild: sh: remove unused install script kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y kbuild: Switch to 'f' variants of integrated assembler flag kbuild: Shuffle blank line to improve comment meaning ...
generated by cgit (git 2.34.1) at 2024-07-04 03:41:40 +0000