| Age | Commit message (Collapse) | Author |
|---|
|
Start supporting API version 92 for new devices.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618194245.433cfbb6f042.I914da5bd0e2ed25148726f9fb55e7a60b895edfd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
iwl_trans_pcie_gen2_fw_alive doesn't use the scd_addr parameter,
it was there only because we needed the functio to have a prototype same
as iwl_trans_ops::fw_alive callback.
But now the ops is removed so no reason to keep the parameter.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240618194245.1aa8bf13aea9.I9662c10c1db545dd8849af4bb4ab47708d4548d8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This debug is not in use anymore. Remove it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20240618194245.bded22049fae.I980c4a941d769f93cf74bfc90a7d7d9fb384dea1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This will allow to suspend / resume the system without resetting the
firmware. This will allow to reduce the resume time.
In case the fast_resume fails, stop the device and bring it up from
scratch.
Raise the timeout for the D3_END notification since in some iterations,
it took 240ms.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618194245.03b8d2801044.I613d17c712de7a0d611cde4e14f37ebbe0c3c964@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix incorrect use of _tx_ valid ant data in the function.
Fixes: 4ea1ed1d14d8 ("wifi: iwlwifi: mvm: support set_antenna()")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618200104.b7c6a320c7dc.I3092eb5275056f2162b9694e583c310c38568b2a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
AP interfaces fundamentally cannot leave the channel, so multi-
channel operation with them isn't really possible. We shouldn't
advertise support for such, at least not as long as we don't
have full multi-radio support. Thus, remove the AP bit from the
interface combinations for two channels and add another set for
just one channel that has it.
Also, to avoid duplicating everything even more, unify the NAN
and non-NAN cases.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618200104.3213638262ef.I2a0031b37623d7763fd0c5405477ea7206a3e923@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Do not access legacy bits for new devices, this has no effect.
Somehow, wowlan worked despite the usage of the wrong bits. Now
that we want to keep the firmware loaded during suspend even without
wowlan, this change is needed.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618200104.399d4d215210.Id12e7fdb7bab9f2c4c0d292519b5c1b4753a8c84@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This will allow the low level driver to take different actions for
different flows.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Issuing a system suspend command raises the following warning:
WARNING: CPU: 0 PID: 15 at drivers/mmc/core/sdio.c:1042 mmc_sdio_suspend+0xd4/0x19c
CPU: 0 PID: 15 Comm: kworker/u2:1 Not tainted 6.7.0-rc1-wt+ #710
Hardware name: Atmel SAMA5
Workqueue: events_unbound async_run_entry_fn
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x48
dump_stack_lvl from __warn+0x98/0x160
__warn from warn_slowpath_fmt+0xcc/0x140
warn_slowpath_fmt from mmc_sdio_suspend+0xd4/0x19c
mmc_sdio_suspend from mmc_bus_suspend+0x50/0x70
mmc_bus_suspend from dpm_run_callback+0xe4/0x248
dpm_run_callback from __device_suspend+0x234/0x91c
__device_suspend from async_suspend+0x24/0x9c
async_suspend from async_run_entry_fn+0x6c/0x210
async_run_entry_fn from process_one_work+0x3a0/0x870
[...]
This warning is due to a check in SDIO core ensuring that interrupts do not
remain enabled for cards being powered down during suspend. WILC driver
currently does not set the MMC_PM_KEEP_POWER flag, so disable interrupt
when entering resume.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240613-wilc_suspend-v1-6-c2f766d0988c@bootlin.com
|
|
WILC1000 suspend/resume implementation is currently composed of two parts:
suspend/resume ops implemented in cfg80211 ops, which merely sets a
flag, and suspend/resume ops in sdio/spi driver which, based on this flag,
execute or not the suspend/resume mechanism. This dual set of ops is not
really needed , so keep only the sdio part to implement suspend/resume.
While doing so, remove the now unused suspend_event flag.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240613-wilc_suspend-v1-5-c2f766d0988c@bootlin.com
|
|
Just move the suspend method next to the resume method in the sdio part
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240613-wilc_suspend-v1-4-c2f766d0988c@bootlin.com
|
|
There is no reason to keep the MMC host claimed during suspend.
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240613-wilc_suspend-v1-3-c2f766d0988c@bootlin.com
|
|
wake/sleep
host_wakeup_notify and host_sleep_notify are surrounded by chip_wakeup and
chip_allow_sleep calls, which theorically need to be protected with the
hif_cs lock. This lock protection is currently missing. Instead of adding
the lock where those two functions are called, move those in host->chip
suspend notifications to benefit from the lock already used there (in
bus_acquire/bus_release)
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240613-wilc_suspend-v1-2-c2f766d0988c@bootlin.com
|
|
Driver systematically disables some power mechanism each time it starts the
chip firmware (so mostly when interface is brought up). This has a negative
impact on some specific scenarios when the chip is exposed as a
hotpluggable SDIO card (eg: WILC1000 SD):
- when executing suspend/resume sequence while interface has been brought
up
- rebooting the platform while module is plugged and interface has been
brought up
Those scenarios lead to mmc core trying to initialize again the chip which
is now unresponsive (because of the power sequencer setting), so it fails
in mmc_rescan->mmc_attach_sdio and enter a failure loop while trying to
send CMD5:
mmc0: error -110 whilst initialising SDIO card
mmc0: error -110 whilst initialising SDIO card
mmc0: error -110 whilst initialising SDIO card
[...]
Preventing the driver from disabling this "power sequencer" fixes those
enumeration issues without affecting nominal operations.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240613-wilc_suspend-v1-1-c2f766d0988c@bootlin.com
|
|
wlcore firmware versions are structured thusly:
chip.if-type.major.sub-type.minor
e.g. 8 9 0 0 58
With WL18xx ignoring the major firmware version, looking for a
firmware version that conforms to:
chip >= 8
if-type >= 9
major (don't care)
sub-type (don't care)
minor >= 58
Each test is satisfied if the value read from the firmware is greater
than the minimum, but if it is equal (or we don't care about the
field), then the next field is checked.
Thus it doesn't recognise 8.9.1.x.0 as being newer than 8.9.0.x.58
since the major and sub-type numbers are "don't care" and the minor
needs to be greater or equal to 58.
We need to change the major version from "ignore" to "0" for this later
firmware to be correctly detected, and allow the dual-firmware version
support to work.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/E1sBsyH-00E8w6-Vu@rmk-PC.armlinux.org.uk
|
|
Add the necessary code to read the 8.9.1 firmware status into the
driver private status structure, augmenting the 8.9.0 firmware
status code. New structure layout taken from:
https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0023-wlcore-Fixing-PN-drift-on-encrypted-link-after-recov.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/E1sBsyC-00E8w0-Rz@rmk-PC.armlinux.org.uk
|
|
TI Wl18xx firmware adds a "pn16" field for AES and TKIP keys as per
their patch:
https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0023-wlcore-Fixing-PN-drift-on-encrypted-link-after-recov.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7
Add support for this, but rather than requiring the field to be
present (which would break existing firmwares), make it optional.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/E1sBsy7-00E8vu-Nc@rmk-PC.armlinux.org.uk
|
|
Updates for WL18xx firmware 8.9.1.x.x need to know the AP encryption
key type. Store this when a new key is set. Patch extracted from:
https://git.ti.com/cgit/wilink8-wlan/build-utilites/tree/patches/kernel_patches/4.19.38/0023-wlcore-Fixing-PN-drift-on-encrypted-link-after-recov.patch?h=r8.9&id=a2ee50aa5190ed3b334373d6cd09b1bff56ffcf7
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/E1sBsy2-00E8vo-KK@rmk-PC.armlinux.org.uk
|
|
wlcore_fw_status() is passed a pointer to the struct wl_fw_status to
decode the status into, which is always wl->fw_status. Rather than
referencing wl->fw_status within wlcore_fw_status(), use the supplied
argument so that we access this member in a consistent manner.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/E1sBsxx-00E8vi-Gf@rmk-PC.armlinux.org.uk
|
|
Referring to status->counters.tx_lnk_free_pkts[i] multiple times leads
to less efficient code. Cache this value in a local variable. This
also makes the code clearer.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/E1sBsxs-00E8vc-DD@rmk-PC.armlinux.org.uk
|
|
wl18xx_tx_immediate_complete() iterates through the completed transmit
descriptors in a circular fashion, and in doing so uses a modulus
operation that is not a power of two. This leads to inefficient code
generation, which can be easily solved by providing a helper to
increment to the next descriptor. Use this more efficient solution.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/E1sBsxn-00E8vW-9h@rmk-PC.armlinux.org.uk
|
|
Fix the calculation of clear_offset, which may overflow the end of
the buffer. However, this is harmless if it does because in that case
it will be recalculated when we copy the chunk of messages at the
start of the buffer.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/E1sBsxi-00E8vQ-5r@rmk-PC.armlinux.org.uk
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240603091541.8367-7-wsa+renesas@sang-engineering.com
|
|
wait_for_completion_interruptible_timeout()
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_interruptible_timeout() causing patterns like:
timeout = wait_for_completion_interruptible_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240603091541.8367-5-wsa+renesas@sang-engineering.com
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240603091541.8367-4-wsa+renesas@sang-engineering.com
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_event_timeout() causing patterns like:
timeout = wait_event_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240603091541.8367-3-wsa+renesas@sang-engineering.com
|
|
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "cmd_buf" variable is a pointer to "struct at76_command" and
this structure ends in a flexible array:
struct at76_command {
[...]
u8 data[];
} __packed;
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the calculation "size + count" in the
kmalloc() function.
Also, declare a new variable (total_size) since the return value of the
struct_size() helper is used several times.
At the same time, prepare for the coming implementation by GCC and Clang
of the __counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time via
CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for
strcpy/memcpy-family functions). In this case, it is important to note
that the attribute used is "__counted_by_le" since the counter type is
"__le16".
This way, the code is more readable and safer.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/AS8PR02MB7237578654CEDDFE5F8C17BA8BFE2@AS8PR02MB7237.eurprd02.prod.outlook.com
|
|
It is preferred to use sizeof(*pointer) instead of sizeof(type)
due to the type of the variable can change and one needs not
change the former (unlike the latter). This patch has no effect
on runtime behavior.
At the same time remove some redundant NULL initializations.
Signed-off-by: Erick Archer <erick.archer@outlook.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/AS8PR02MB7237C784C14DBC943CB719F88BFE2@AS8PR02MB7237.eurprd02.prod.outlook.com
|
|
This is the first step towards removing the P2P Device MAC.
Use ROC (which uses the AUX MAC) for P2P Device
discoveribility and action frames.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140556.8c90e457abbd.I8e340759ecb299e05b1809f3d8060429c6cbbd01@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If non-BSS and remain-on-channel (ROC) blocking were to occur
simultaneously, they'd step on each other's toes, unblocking
when not yet supported. Disentangle these bits, and ROC doesn't
need to use the non_bss_link() function then.
Fixes: a1efeb823084 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140556.461fcf7b95bb.Id0d21dcb739d426ff15ec068b5df8abaab58884d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Stop supporting all FWs older than the max API version.
These FW versions were supported since v6.5.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240605140327.ad6d43fe9893.I96f769e7d5be3e6499d260451df781bd694a5142@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When EMLSR gets unblocked, the current code checks if the last exit was
due to an EXIT reason (as opposed to a BLOCKING one), and if so, it
does nothing, as in this case a MLO scan was scheduled to run in 30
seconds.
But the code doesn't consider the time that passed from the last exit,
so if immediately after the exit a blocker occurred (e.g. non-BSS
interface), and lasts for more than 30 seconds, then the MLO scan and the
following link selection will decide not to enter EMLSR, and when the
unblocking event finally happens, the reason is still set to the EXIT one,
so it will do nothing, and we will not have the chance to re-enable EMLSR.
Fix this by checking also the time that has passed since the last exit,
only if it is less than 30 seconds, we can count on the scheduled MLO
scan.
Note that clearing the reason itself can't be done since it is needed
for the EMLSR prevention mechanism.
Fixes: 2f33561ea8f9 ("wifi: iwlwifi: mvm: trigger link selection after exiting EMLSR")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240605140327.58556fc4cfa9.I4c55b3cd9f20b21b37f28258d0fb6842ba413966@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This was needed when we had multiple types of transports. Now we only
have pcie, so there is no need for this ops.
Cleanup the code such as the different trans APIs will call the pcie
function directly, instead of calling the callback,
and remove struct iwl_trans_ops.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.8315ff64f9f3.Ifdbc1f26d49766f7de553dcb5f613885f4ee65cc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The TX queue code was mostly moved out to support an internal
transport that we were never going to publish, but we're no
longer using that. Since we're also going to be dissolving
the virtual transport layer entirely, integrate the TX queue
code into the PCIe layer.
This also has a small kernel of already removing the virtual
transport function layer, since iwl_trans_send_cmd() calls
iwl_trans_pcie_send_hcmd() directly now, even if that still
calls the transport send_cmd method for now, we'll clean it
up later.
Also, not everything is renamed yet.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.936b13f45071.Ib219ce01a1e67bcad79d5131626db950252aaa46@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This needs to include dbg-tlv.h since it uses the value of
IWL_FW_INI_ALLOCATION_NUM from that file.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.2d25691283eb.I0909621a0e293a8a21d4f1de6e5fd59c22e4b212@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This really isn't correct to be in the opmode, do the clamping
(and power-of-2 fixup that may be necessary due to this, or even
otherwise) in the queue code. Also move down the retrying of the
allocation, it should be after all the size fixups, but also it
just makes sense, and avoids retrying same-size allocations in
the case of the BZ-family A-step workaround.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.000a0a1e807d.Ib822590d5aca76ff3168418ae2c139b3d43d81ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When entering D3 we want to configure skip over DTIM, but
it can't use the deflink configuration, that will not even
exist. Adjust the code to handle multiple links by taking
the min skip, even if we should only have a single active
link at this point.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.bccf980fadb4.Idc98b9f3634f39d2fae9bd9916f5d050ccd48f95@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Stop supporting older FWs.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240605140327.ff8477233010.Ic8c73bd6749cc5f8ab5297807bb0be9bd96a59fa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
These entries are not used, remove them.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240605140327.0c7c520814d5.I19cefb3d81b03a5be94c029cfffd1c8b8c437182@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Setting a channel with 320 MHz channel width over hwsim results in an
array-index-out-of-bounds error. Fix it by adding 320 MHz to hwsim
supported channel widths.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605135233.a766c1465566.Ib859c7233511b61b8a34022cfceeb4971c739d80@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
irq_set_affinity_hint() is deprecated. Use irq_update_affinity_hint()
instead. This removes the side-effect of actually applying the affinity.
The driver does not really need to worry about spreading its IRQs across
CPUs. The core code already takes care of that.
On the contrary, when the driver applies affinities by itself, it breaks
the users' expectations:
1. The user configures irqbalance with IRQBALANCE_BANNED_CPULIST in
order to prevent IRQs from being moved to certain CPUs that run a
real-time workload.
2. ice reconfigures VSIs at runtime due to a MIB change
(ice_dcb_process_lldp_set_mib_change). Reopening a VSI resets the
affinity in ice_vsi_req_irq_msix().
3. ice has no idea about irqbalance's config, so it may move an IRQ to
a banned CPU. The real-time workload suffers unacceptable latency.
I am not sure if updating the affinity hints is at all useful, because
irqbalance ignores them since 2016 ([1]), but at least it's harmless.
This ice change is similar to i40e commit d34c54d1739c ("i40e: Use
irq_update_affinity_hint()").
[1] https://github.com/Irqbalance/irqbalance/commit/dcc411e7bfdd
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-3-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In ice_ptp_cfg_clkout(), the ice driver needs to calculate the nearest next
second of a current time value specified in nanoseconds. It implements this
using div64_u64, because the time value is a u64. It could use div_u64
since NSEC_PER_SEC is smaller than 32-bits.
Ideally this would be implemented directly with roundup(), but that can't
work on all platforms due to a division which requires using the specific
macros and functions due to platform restrictions, and to ensure that the
most appropriate and fast instructions are used.
The kernel doesn't currently provide any 64-bit equivalents for doing
roundup. Attempting to use roundup() on a 32-bit platform will result in a
link failure due to not having a direct 64-bit division.
The closest equivalent for this is DIV64_U64_ROUND_UP, which does a
division always rounding up. However, this only computes the division, and
forces use of the div64_u64 in cases where the divisor is a 32bit value and
could make use of div_u64.
Introduce DIV_U64_ROUND_UP based on div_u64, and then use it to implement
roundup_u64 which takes a u64 input value and a u32 rounding value.
The name roundup_u64 matches the naming scheme of div_u64, and future
patches could implement roundup64_u64 if they need to round by a multiple
that is greater than 32-bits.
Replace the logic in ice_ptp.c which does this equivalent with the newly
added roundup_u64.
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-2-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).
Let's correct the old usages of *-objs in Makefiles.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-1-d1470cee3347@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:
net/mac80211/cfg.c
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au
drivers/net/wireless/microchip/wilc1000/netdev.c
https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
wifi: ath12k: add hw_link_id in ath12k_pdev
wifi: ath12k: add panic handler
wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
wifi: brcm80211: remove unused structs
wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
wifi: ath12k: do not process consecutive RDDM event
dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
wifi: rtlwifi: handle return value of usb init TX/RX
wifi: rtlwifi: Enable the new rtl8192du driver
wifi: rtlwifi: Add rtl8192du/sw.c
wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
wifi: rtlwifi: Add rtl8192du/dm.{c,h}
wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
wifi: rtlwifi: Add rtl8192du/rf.{c,h}
wifi: rtlwifi: Add rtl8192du/trx.{c,h}
wifi: rtlwifi: Add rtl8192du/phy.{c,h}
wifi: rtlwifi: Add rtl8192du/hw.{c,h}
wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
wifi: rtlwifi: Add rtl8192du/table.{c,h}
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kernel.h is included solely for some other existing headers.
Include them directly and get rid of kernel.h.
While at it, sort headers alphabetically for easier maintenance.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ACLs that reside in the algorithmic TCAM (A-TCAM) in Spectrum-2 and
newer ASICs can share the same mask if their masks only differ in up to
8 consecutive bits. For example, consider the following filters:
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 192.0.2.0/24 action drop
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 198.51.100.128/25 action drop
The second filter can use the same mask as the first (dst_ip/24) with a
delta of 1 bit.
However, the above only works because the two filters have different
values in the common unmasked part (dst_ip/24). When entries have the
same value in the common unmasked part they create undesired collisions
in the device since many entries now have the same key. This leads to
firmware errors such as [1] and to a reduced scale.
Fix by adjusting the hash table key to only include the value in the
common unmasked part. That is, without including the delta bits. That
way the driver will detect the collision during filter insertion and
spill the filter into the circuit TCAM (C-TCAM).
Add a test case that fails without the fix and adjust existing cases
that check C-TCAM spillage according to the above limitation.
[1]
mlxsw_spectrum2 0000:06:00.0: EMAD reg access failed (tid=3379b18a00003394,reg_id=3027(ptce3),type=write,status=8(resource not available))
Fixes: c22291f7cf45 ("mlxsw: spectrum: acl: Implement delta for ERP")
Reported-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ACLs in Spectrum-2 and newer ASICs can reside in the algorithmic TCAM
(A-TCAM) or in the ordinary circuit TCAM (C-TCAM). The former can
contain more ACLs (i.e., tc filters), but the number of masks in each
region (i.e., tc chain) is limited.
In order to mitigate the effects of the above limitation, the device
allows filters to share a single mask if their masks only differ in up
to 8 consecutive bits. For example, dst_ip/25 can be represented using
dst_ip/24 with a delta of 1 bit. The C-TCAM does not have a limit on the
number of masks being used (and therefore does not support mask
aggregation), but can contain a limited number of filters.
The driver uses the "objagg" library to perform the mask aggregation by
passing it objects that consist of the filter's mask and whether the
filter is to be inserted into the A-TCAM or the C-TCAM since filters in
different TCAMs cannot share a mask.
The set of created objects is dependent on the insertion order of the
filters and is not necessarily optimal. Therefore, the driver will
periodically ask the library to compute a more optimal set ("hints") by
looking at all the existing objects.
When the library asks the driver whether two objects can be aggregated
the driver only compares the provided masks and ignores the A-TCAM /
C-TCAM indication. This is the right thing to do since the goal is to
move as many filters as possible to the A-TCAM. The driver also forbids
two identical masks from being aggregated since this can only happen if
one was intentionally put in the C-TCAM to avoid a conflict in the
A-TCAM.
The above can result in the following set of hints:
H1: {mask X, A-TCAM} -> H2: {mask Y, A-TCAM} // X is Y + delta
H3: {mask Y, C-TCAM} -> H4: {mask Z, A-TCAM} // Y is Z + delta
After getting the hints from the library the driver will start migrating
filters from one region to another while consulting the computed hints
and instructing the device to perform a lookup in both regions during
the transition.
Assuming a filter with mask X is being migrated into the A-TCAM in the
new region, the hints lookup will return H1. Since H2 is the parent of
H1, the library will try to find the object associated with it and
create it if necessary in which case another hints lookup (recursive)
will be performed. This hints lookup for {mask Y, A-TCAM} will either
return H2 or H3 since the driver passes the library an object comparison
function that ignores the A-TCAM / C-TCAM indication.
This can eventually lead to nested objects which are not supported by
the library [1].
Fix by removing the object comparison function from both the driver and
the library as the driver was the only user. That way the lookup will
only return exact matches.
I do not have a reliable reproducer that can reproduce the issue in a
timely manner, but before the fix the issue would reproduce in several
minutes and with the fix it does not reproduce in over an hour.
Note that the current usefulness of the hints is limited because they
include the C-TCAM indication and represent aggregation that cannot
actually happen. This will be addressed in net-next.
[1]
WARNING: CPU: 0 PID: 153 at lib/objagg.c:170 objagg_obj_parent_assign+0xb5/0xd0
Modules linked in:
CPU: 0 PID: 153 Comm: kworker/0:18 Not tainted 6.9.0-rc6-custom-g70fbc2c1c38b #42
Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018
Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work
RIP: 0010:objagg_obj_parent_assign+0xb5/0xd0
[...]
Call Trace:
<TASK>
__objagg_obj_get+0x2bb/0x580
objagg_obj_get+0xe/0x80
mlxsw_sp_acl_erp_mask_get+0xb5/0xf0
mlxsw_sp_acl_atcam_entry_add+0xe8/0x3c0
mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0
mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270
mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510
process_one_work+0x151/0x370
Fixes: 9069a3817d82 ("lib: objagg: implement optimization hints assembly and use hints for object creation")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The key is encoded, not encrypted.
Fixes: c22291f7cf45 ("mlxsw: spectrum: acl: Implement delta for ERP")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the k3_udma_glue_rx_get_irq() function returns either negative
error codes or zero on error. Generally, in the kernel, zero means
success so this be confusing and has caused bugs in the past. Also the
"tx" version of this function only returns negative error codes. Let's
clean this "rx" function so both functions match.
This patch has no effect on runtime.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add multicast filtering support for ICSSG Driver. Multicast addresses will
be updated by __dev_mc_sync() API. icssg_prueth_add_macst () and
icssg_prueth_del_mcast() will be sync and unsync APIs for the driver
respectively.
To add a mac_address for a port, driver needs to call icssg_fdb_add_del()
and pass the mac_address and BIT(port_id) to the API. The ICSSG firmware
will then configure the rules and allow filtering.
If a mac_address is added to port0 and the same mac_address needs to be
added for port1, driver needs to pass BIT(port0) | BIT(port1) to the
icssg_fdb_add_del() API. If driver just pass BIT(port1) then the entry for
port0 will be overwritten / lost. This is a design constraint on the
firmware side.
To overcome this in the driver, to add any mac_address for let's say portX
driver first checks if the same mac_address is already added for any other
port. If yes driver calls icssg_fdb_add_del() with BIT(portX) |
BIT(other_existing_port). If not, driver calls icssg_fdb_add_del() with
BIT(portX).
The same thing is applicable for deleting mac_addresses as well. This
logic is in icssg_prueth_add_mcast / icssg_prueth_del_mcast APIs.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
