summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-06-01net: hns3: Optimize the VF's process of updating multicast MACXi Wang
In the update flow of the new PF driver, if a multicast address is in mta table, the VF deletion action will not take effect. This patch adds the VF adaptation according to the new flow of PF'driver. Signed-off-by: Xi Wang <wangxi11@huawei.com> Reviewed-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01net: hns3: Optimize the PF's process of updating multicast MACXi Wang
In the current process, the multicast MAC is added to both MAC_VLAN table and MTA table, this will reduce the utilization of the resource. This patch improves the process of adding multicast MAC address, the new process starts using the MTA table to add multicast MAC after the MAC_VLAN table is full, and the MTA is disable if it is no longer used. Signed-off-by: Xi Wang <wangxi11@huawei.com> Reviewed-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01net: hns3: Fix for vxlan tx checksum bugYunsheng Lin
when skb->encapsulation is 0, skb->ip_summed is CHECKSUM_PARTIAL and it is udp packet, which has a dest port as the IANA assigned. the hardware is expected to do the checksum offload, but the hardware will not do the checksum offload when udp dest port is 4789. This patch fixes it by doing the checksum in software. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01net: hns3: Add missing break in misc_irq_handleYunsheng Lin
There is a break missing in the switch/case handling in hclge_misc_irq_handle, which causes the log to output uncorrectly. This patch adds the missing break, and change the dev_dbg to dev_warn in order to better catch the error. Fixes: c1a81619d73a ("net: hns3: Add mailbox interrupt handling to PF driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01net: hns3: Fix for phy not link up problem after resettingYunsheng Lin
When resetting, phy_state_machine may be accessing the phy through firmware if the phy is not stopped or disconnected, which will cause firemware timeout problem because the firmware is busy processing the reset request. This patch fixes it by disabling the phy when resetting. Fixes: b940aeae0ed6 ("net: hns3: never send command queue message to IMP when reset") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01net: hns3: Fix for hclge_reset running repeatly problemYunsheng Lin
When hardware sends the HCLGE_VECTOR0_EVENT_RST event through hclge_misc_irq_handle, currently driver enables misc_vector in the interrupt handle, and hardware generates the same interrupt for the same reset event again and again until the reset is complete, which causes hclge_reset running repeatly problem. This patch fixes by enabling the misc_vector after reset is complete. Fixes: 4ed340ab8f49 ("net: hns3: Add reset process in hclge_main") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01net: hns3: Fix for service_task not running problem after resettingYunsheng Lin
When hclge_ae_stop is called during resetting, it will cancel the service_task by calling cancel_work_sync, which may cause the service_task to exit without clearing HCLGE_STATE_SERVICE_SCHED bit. If this happens, the service_task will never run again. This patch fixes this problem by clearing it after calling cancel_work_sync in hclge_ae_stop. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01net: hns3: Fix setting mac address errorJian Shen
When doing function reset or insmod hns3 dirver after rmmod, the entries of mac vlan table are not cleared, which may cause init mac address failed. This patch fixes it by clearing the old mac address when doing function reset or rmmod hns3 driver. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01net: hns3: Add repeat address checking for setting mac addressJian Shen
Add checking for new mac address. It doesn't need to config the mac vlan table if it's already in use. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01net: hns3: Add support for IFF_ALLMULTI flagPeng Li
This patch adds support for IFF_ALLMULTI flag to HNS3 PF and VF driver. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01net: hns3: Disable vf vlan filter when vf vlan table is fullYunsheng Lin
This is only 128 entries for hardware's vf vlan table, when the vf table is full, the firmware will disable the vf vlan filter and return a resp_code of HCLGE_VF_VLAN_NO_ENTRY to driver. This patch checks the if resp_code from firmware is HCLGE_VF_VLAN_NO_ENTRY, if yes, then print a warning and return ok to the caller. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01net: usb: cdc_mbim: add flag FLAG_SEND_ZLPDaniele Palmas
Testing Telit LM940 with ICMP packets > 14552 bytes revealed that the modem needs FLAG_SEND_ZLP to properly work, otherwise the cdc mbim data interface won't be anymore responsive. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01net: mvpp2: Split the PPv2 driver to a dedicated directoryMaxime Chevallier
As the mvpp2 driver is growing, move this driver to a dedicated directory and split it into several files. Since this driver has a lot of register defines and structure definitions, it can benefit from having all of this into a dedicated header file, named mvpp2.h. A good chunk of the mvpp2 code is dedicated to Header Parser handling, so we introduce mvpp2_prs.h where all Header Parser definitions are located, and mvpp2_prs.c containing the related code. In the same way, mvpp2_cls.h and mvpp2_cls.c are created to contain Classifier and RSS related code. The former 'mvpp2.c' file is renamed 'mvpp2_main.c' so that we can keep the driver binary named 'mvpp2'. This commit is only about spliting the driver into multiple files and doesn't introduce any new function, feature or fix besides removing 'static' keywords when needed. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01net: dsa: b53: Add BCM5389 supportDamien Thébault
This patch adds support for the BCM5389 switch connected through MDIO. Signed-off-by: Damien Thébault <damien.thebault@vitec.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31ixgbe: fix parsing of TC actions for HW offloadOndřej Hlavatý
The previous code was optimistic, accepting the offload of whole action chain when there was a single known action (drop/redirect). This results in offloading a rule which should not be offloaded, because its behavior cannot be reproduced in the hardware. For example: $ tc filter add dev eno1 parent ffff: protocol ip \ u32 ht 800: order 1 match tcp src 42 FFFF \ action mirred egress mirror dev enp1s16 pipe \ drop The controller is unable to mirror the packet to a VF, but still offloads the rule by dropping the packet. Change the approach of the function to a pessimistic one, rejecting the chain when an unknown action is found. This is better suited for future extensions. Note that both recognized actions always return TC_ACT_SHOT, therefore it is safe to ignore actions behind them. Signed-off-by: Ondřej Hlavatý <ohlavaty@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31virtio_net: fix error return code in virtnet_probe()Wei Yongjun
Fix to return a negative error code from the failover create fail error handling case instead of 0, as done elsewhere in this function. Fixes: ba5e4426e80e ("virtio_net: Extend virtio to use VF datapath when available") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net: ethernet: davinci_emac: fix error handling in probe()Dan Carpenter
The current error handling code has an issue where it does: if (priv->txchan) cpdma_chan_destroy(priv->txchan); The problem is that ->txchan is either valid or an error pointer (which would lead to an Oops). I've changed it to use multiple error labels so that the test can be removed. Also there were some missing calls to netif_napi_del(). Fixes: 3ef0fdb2342c ("net: davinci_emac: switch to new cpdma layer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net: dsa: mv88e6xxx: Be explicit about DT or pdataAndrew Lunn
Make it explicit that either device tree is used or platform data. If neither is available, abort the probe. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 877b7cb0b6f2 ("net: dsa: mv88e6xxx: Add minimal platform_data support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net: ti: cpsw: include gpio/consumer.hArnd Bergmann
On platforms that don't always enable CONFIG_GPIOLIB, we run into a build failure: drivers/net/ethernet/ti/cpsw.c: In function 'cpsw_probe': drivers/net/ethernet/ti/cpsw.c:3006:9: error: implicit declaration of function 'devm_gpiod_get_array_optional' [-Werror=implicit-function-declaration] mode = devm_gpiod_get_array_optional(&pdev->dev, "mode", GPIOD_OUT_LOW); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/ti/cpsw.c:3006:59: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'? mode = devm_gpiod_get_array_optional(&pdev->dev, "mode", GPIOD_OUT_LOW); Since we cannot rely on this to be visible from gpio.h, we have to include gpio/consumer.h directly. Fixes: 2652113ff043 ("net: ethernet: ti: Allow most drivers with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net/mlx5: Add FPGA QP error eventIlan Tayari
The FPGA queue pair (QP) event fires whenever a QP on the FPGA transitions to the error state. At this stage, this event is unrecoverable, it may become recoverable in the future. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Adi Nissim <adin@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net/mlx5: Add temperature warning event to logIlan Tayari
Temperature warning event is sent by FW to indicate high temperature as detected by one of the sensors on the board. Add handling of this event by writing the numbers of the alert sensors to the kernel log. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Adi Nissim <adin@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31Merge tag 'wireless-drivers-for-davem-2018-05-30' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.17 Two last minute fixes, hopefully they make it to 4.17 still. rt2x00 * revert a fix which caused even more problems iwlwifi * fix a crash when there are 16 or more logical CPUs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31cxgb4: Add FORCE_PAUSE bit to 32 bit port capsGanesh Goudar
Add FORCE_PAUSE bit to force local pause settings instead of using auto negotiated values. Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31net/sonic: Use dma_mapping_error()Finn Thain
With CONFIG_DMA_API_DEBUG=y, calling sonic_open() produces the message, "DMA-API: device driver failed to check map error". Add the missing dma_mapping_error() call. Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31mlxsw: spectrum_switchdev: Schedule respin during trans preparePetr Machata
Since there's no special support for the bridge events, the driver returns -EOPNOTSUPP, and thus the commit never happens. Therefore schedule respin during the prepare stage: there's no real difference one way or another. This fixes the problem that mirror-to-gretap offload wouldn't adapt to changes in bridge vlan configuration right away and another notification would have to arrive for mlxsw to catch up. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31rocker: rocker_main: Ignore bridge VLAN eventsPetr Machata
A follow-up patch enables emitting VLAN notifications for the bridge CPU port in addition to the existing slave port notifications. These notifications have orig_dev set to the bridge in question. Because there's no specific support for these VLANs, just ignore the notifications to maintain the current behavior. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31mlxsw: spectrum_switchdev: Ignore bridge VLAN eventsPetr Machata
A follow-up patch enables emitting VLAN notifications for the bridge CPU port in addition to the existing slave port notifications. These notifications have orig_dev set to the bridge in question. Because there's no specific support for these VLANs, just ignore the notifications to maintain the current behavior. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31qed*: Add link change count value to ethtool statistics display.Sudarsana Reddy Kalluru
This patch adds driver changes for capturing the link change count in ethtool statistics display. Please consider applying this to "net-next". Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31Merge tag 'mlx5e-updates-2018-05-29' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5e-updates-2018-05-29 This series includes mlx5 FPGA and mlx5e netdevice updates: 1) Print FPGA info such as device name, vendor id, etc.., from Ilan Tayari. 2) Abort FPGA if some essential capabilities are not supported, from Yevgeny Kliteynik. 3) Two FPGA dma related minor fixes, from Ilya Lesokhin. 4) Use the right table to report offloaded TC rules, from Or Gerlitz. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-30Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.18. Major changes: ath10k * add memory dump support for QCA9888 and QCA99X0 * add support to configure channel dwell time * support new DFS host confirmation feature in the firmware ath * update various regulatory mappings wcn36xx * various fixes to improve reliability * add Factory Test Mode support
2018-05-30qtnfmac: fix invalid STA state on EAPOL failureSergey Matyukevich
Driver switches vif sta_state into QTNF_STA_CONNECTING when cfg80211 core initiates connect procedure. Further this state is changed either to QTNF_STA_CONNECTED or to QTNF_STA_DISCONNECTED by BSS_JOIN and BSS_LEAVE events from firmware. However it is possible that no such events will be sent by firmware, e.g. if EAPOL timed out. In this case vif sta_mode will remain in QTNF_STA_CONNECTING state and all subsequent connection attempts will fail with -EBUSY error code. Fix this by perfroming STA state transition from QTNF_STA_CONNECTING to QTNF_STA_DISCONNECTED in cfg80211 disconnect callback. No need to rely upon firmware events in this case. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: cancel scan on disconnectAndrey Shevchenko
Cancel scan operation on STA disconnect. Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: fix bg_scan_period parameter processingAndrey Shevchenko
Do not process bg_scan_period parameter in qtnfmac driver. Pass correct values as is. In the case of invalid values pass default value. Leave further processing to firmware. Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: fix firmware command error pathDmitry Lebed
Free command skb if bus state is not QTNF_FW_STATE_ACTIVE. Signed-off-by: Dmitry Lebed <dlebed@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: improve control path timeout handlingDmitry Lebed
Control path will not be operational after firmware failure. Change bus state to QTNF_FW_STATE_EP_DEAD after the control path timeout. Don't wait for timeout if control path is already dead. Signed-off-by: Dmitry Lebed <dlebed@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: cleanup wdev structure between its usesSergey Matyukevich
Driver uses statically allocated wdev structures for each virtual interface. However wdev structure is not properly cleaned up between its uses. As a result, various bugs appear when userspace tools like hostapd were not gracefully stopped. In particular, this commit fixes the following issue: - start hostapd with more than 2 mBSS - kill hostapd using SIGKILL - start again hostapd with more than 2 mBSS However only two mBSS entities will be started: primary and the last BSS listed in hostapd config. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: decode error codes from firmware repliesIgor Mitsyanko
Introduce a function that will map an error code reported in reply to a firmware command, into one of standard errno codes. Use additional error codes to improve error reporting for MAC address changes. Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: simplify notationSergey Matyukevich
Shorten line lengths using a more compact notation to access mac info. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30qtnfmac: remove unused function declarationsAndrey Shevchenko
Functions qtnf_cmd_resp_parse and qtnf_cmd_resp_check have been removed. Remove their declarations as well. Signed-off-by: Andrey Shevchenko <ashevchenko@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30drivers/net: Fix various unnecessary characters after logging newlinesJoe Perches
Remove and coalesce formats when there is an unnecessary character after a logging newline. These extra characters cause logging defects. Miscellanea: o Coalesce formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-30net: davinci: fix building davinci mdio code without CONFIG_OFArnd Bergmann
Test-building this driver on targets without CONFIG_OF revealed a build failure: drivers/net/ethernet/ti/davinci_mdio.c: In function 'davinci_mdio_probe': drivers/net/ethernet/ti/davinci_mdio.c:380:9: error: implicit declaration of function 'davinci_mdio_probe_dt'; did you mean 'davinci_mdio_probe'? [-Werror=implicit-function-declaration] This adjusts the #ifdef logic in the driver to make it build in all configurations. Fixes: 2652113ff043 ("net: ethernet: ti: Allow most drivers with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-30net: ethernet: freescale: fix false-positive string overflow warningArnd Bergmann
While compile-testing on arm64 with gcc-8.1, I ran into a build diagnostic: drivers/net/ethernet/freescale/fec_main.c: In function 'fec_probe': drivers/net/ethernet/freescale/fec_main.c:3517:25: error: '%d' directive writing between 1 and 10 bytes into a region of size 5 [-Werror=format-overflow=] sprintf(irq_name, "int%d", i); ^~ drivers/net/ethernet/freescale/fec_main.c:3517:21: note: directive argument in the range [0, 2147483646] sprintf(irq_name, "int%d", i); ^~~~~~~ drivers/net/ethernet/freescale/fec_main.c:3517:3: note: 'sprintf' output between 5 and 14 bytes into a destination of size 8 sprintf(irq_name, "int%d", i); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ It appears this has never shown on ppc32 or arm32 for an unknown reason, but now gcc fails to identify that the 'irq_cnt' loop index has an upper bound of 3, and instead uses a bogus range. To work around the warning, this changes the sprintf to snprintf with the correct buffer length. Fixes: 78cc6e7ef957 ("net: ethernet: freescale: Allow FEC with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-30iwlwifi: fix non_shared_ant for 9000 devicesErel Geron
The non-shared antenna was wrong for 9000 device series. Fix it to ANT_B for correct antenna preference by coex in MVM driver. Fixes: 89374fe60bfb ("iwlwifi: Add new PCI IDs for 9260 and 5165 series") Signed-off-by: Erel Geron <erelx.geron@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlwifi: mvm: fix race in queue notification waitJohannes Berg
Initially in this code, the race didn't matter since it didn't do anything. Latest with the commit I marked this as fixing it started to matter as something got done here that needed other data that got freed as soon as the queue notification wait was returning. In the scenario we saw, apparently the IWL_MVM_RXQ_NOTIF_DEL_BA event was sent to all queues, but processing the last event we returned from iwl_mvm_sync_rx_queues_internal() and then from iwl_mvm_free_reorder() and continued some processing before wl_mvm_del_ba() was even invoked on the other CPU. Thus, when the latter finally ran, it found that mvm->baid_map[baid] was no longer valid. Correct the race by moving the counter decrement and wake_up() to be done only after all the per-event processing completed. Note that in the commit I marked as being fixed the wake_up() didn't exist yet (and the code was otherwise problematic) but this particular problem already existed in a way. Fixes: b915c10174fb ("iwlwifi: mvm: add reorder buffer per queue") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlwifi: mvm: honor the max_amsdu_subframes limitEmmanuel Grumbach
A peer can limit the number of subframes it can handle in a single A-MSDU. Honor this limit. Note that the smallest limit is 8, and we are very unlikely to reach that limit. So this isn't really a big deal. Fixes: a6d5e32f247c ("iwlwifi: mvm: send large SKBs to the transport") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlwifi: mvm: open BA session only when sta is authorizedGregory Greenman
Currently, a BA session is opened when the tx traffic exceeds 10 frames per second. As a result of inter-op problems with some APs, add a condition to open BA session only when station is already authorized. Fixes: 482e48440a0e ("iwlwifi: mvm: change open and close criteria of a BA session") Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlwifi: mvm: remove division by size of sizeof(struct ieee80211_wmm_rule)Colin Ian King
The subtraction of two struct ieee80211_wmm_rule pointers leaves a result that is automatically scaled down by the size of the size of pointed-to type, hence the division by sizeof(struct ieee80211_wmm_rule) is bogus and should be removed. Detected by CoverityScan, CID#1467777 ("Extra sizeof expression") Fixes: 77e30e10ee28 ("iwlwifi: mvm: query regdb for wmm rule if needed") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlwifi: pcie: fix race in Rx buffer allocatorShaul Triebitz
Make sure the rx_allocator worker is canceled before running the rx_init routine. rx_init frees and re-allocates all rxb's pages. The rx_allocator worker also allocates pages for the used rxb's. Running rx_init and rx_allocator simultaniously causes a kernel panic. Fix that by canceling the work in rx_init. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlwifi: mvm: fix TSO with highly fragmented SKBsEmmanuel Grumbach
Our hardware has a limited amount of buffer descriptors for each Tx packet. Because of that, there is a short piece of code that makes sure that that we don't push too many subframes in an A-MSDU because of subframes needs 2 buffer descriptors. This code also takes into account the number of fragment of the skb since we also need a buffer descriptor for each fragment in the skb. This piece of code though didn't check that the resulting number of subframes wasn't 0. A user reported that using NFS client, he could get skbs that are so fragmented that the code mentioned above returned 0 for the number of subframes making skb_gso_segment fail and subconsequently iwlwifi would WARN. Fix this by make sure that num_subframes is at least 1. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=199209 Fixes: a6d5e32f247c ("iwlwifi: mvm: send large SKBs to the transport") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlmvm: tdls: Check TDLS channel switch supportAviya Erenfeld
Some versions of the FW don't support channel switch in TDLS. Add a condition that checks it. Fixes: 307e47235a10 ("iwlwifi: mvm: configure TDLS peers to FW") Signed-off-by: Aviya Erenfeld <aviya.erenfeld@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit (git 2.34.1) at 2025-09-21 05:22:00 +0000