| Age | Commit message (Collapse) | Author |
|---|
|
specified"
This reverts commit 8865d22656b4, which caused breakage for platforms
which are not using xgmac2 or gmac4. Only these two cores have the
capability of providing the FIFO sizes from hardware capability fields
(which are provided in priv->dma_cap.[tr]x_fifo_size.)
All other cores can not, which results in these two fields containing
zero. We also have platforms that do not provide a value in
priv->plat->[tr]x_fifo_size, resulting in these also being zero.
This causes the new tests introduced by the reverted commit to fail,
and produce e.g.:
stmmaceth f0804000.eth: Can't specify Rx FIFO size
An example of such a platform which fails is QEMU's npcm750-evb.
This uses dwmac1000 which, as noted above, does not have the capability
to provide the FIFO sizes from hardware.
Therefore, revert the commit to maintain compatibility with the way
the driver used to work.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/4e98f967-f636-46fb-9eca-d383b9495b86@roeck-us.net
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Steven Price <steven.price@arm.com>
Fixes: 8865d22656b4 ("net: stmmac: Specify hardware capability value when FIFO size isn't specified")
Link: https://patch.msgid.link/E1tfeyR-003YGJ-Gb@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 3ca459eaba1bf96a8c7878de84fa8872259a01e3.
The blamed commit caused a regression when neither tun->owner nor
tun->group is set. This is intended to be allowed, but now requires
CAP_NET_ADMIN.
Discussion in the referenced thread pointed out that the original
issue that prompted this patch can be resolved in userspace.
The relaxed access control may also make a device accessible when it
previously wasn't, while existing users may depend on it to not be.
This is a clean pure git revert, except for fixing the indentation on
the gid_valid line that checkpatch correctly flagged.
Fixes: 3ca459eaba1b ("tun: fix group permission check")
Link: https://lore.kernel.org/netdev/CAFqZXNtkCBT4f+PwyVRmQGoT3p1eVa01fCG_aNtpt6dakXncUg@mail.gmail.com/
Signed-off-by: Willem de Bruijn <willemb@google.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Stas Sergeev <stsp2@yandex.ru>
Link: https://patch.msgid.link/20250204161015.739430-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Firmware deinitialization performs MMIO accesses which are not
necessary if the device has already been removed. In some cases,
these accesses happen via readx_poll_timeout_atomic which ends up
timing out, resulting in a warning at hw_atl2_utils_fw.c:112:
[ 104.595913] Call Trace:
[ 104.595915] <TASK>
[ 104.595918] ? show_regs+0x6c/0x80
[ 104.595923] ? __warn+0x8d/0x150
[ 104.595925] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic]
[ 104.595934] ? report_bug+0x182/0x1b0
[ 104.595938] ? handle_bug+0x6e/0xb0
[ 104.595940] ? exc_invalid_op+0x18/0x80
[ 104.595942] ? asm_exc_invalid_op+0x1b/0x20
[ 104.595944] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic]
[ 104.595952] ? aq_a2_fw_deinit+0xcf/0xe0 [atlantic]
[ 104.595959] aq_nic_deinit.part.0+0xbd/0xf0 [atlantic]
[ 104.595964] aq_nic_deinit+0x17/0x30 [atlantic]
[ 104.595970] aq_ndev_close+0x2b/0x40 [atlantic]
[ 104.595975] __dev_close_many+0xad/0x160
[ 104.595978] dev_close_many+0x99/0x170
[ 104.595979] unregister_netdevice_many_notify+0x18b/0xb20
[ 104.595981] ? __call_rcu_common+0xcd/0x700
[ 104.595984] unregister_netdevice_queue+0xc6/0x110
[ 104.595986] unregister_netdev+0x1c/0x30
[ 104.595988] aq_pci_remove+0xb1/0xc0 [atlantic]
Fix this by skipping firmware deinitialization altogether if the
PCI device is no longer present.
Tested with an AQC113 attached via Thunderbolt by performing
repeated unplug cycles while traffic was running via iperf.
Fixes: 97bde5c4f909 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Jacob Moroni <mail@jakemoroni.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203143604.24930-3-mail@jakemoroni.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
ice: fix Rx data path for heavy 9k MTU traffic
Maciej Fijalkowski says:
This patchset fixes a pretty nasty issue that was reported by RedHat
folks which occurred after ~30 minutes (this value varied, just trying
here to state that it was not observed immediately but rather after a
considerable longer amount of time) when ice driver was tortured with
jumbo frames via mix of iperf traffic executed simultaneously with
wrk/nginx on client/server sides (HTTP and TCP workloads basically).
The reported splats were spanning across all the bad things that can
happen to the state of page - refcount underflow, use-after-free, etc.
One of these looked as follows:
[ 2084.019891] BUG: Bad page state in process swapper/34 pfn:97fcd0
[ 2084.025990] page:00000000a60ee772 refcount:-1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x97fcd0
[ 2084.035462] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff)
[ 2084.041990] raw: 0017ffffc0000000 dead000000000100 dead000000000122 0000000000000000
[ 2084.049730] raw: 0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000
[ 2084.057468] page dumped because: nonzero _refcount
[ 2084.062260] Modules linked in: bonding tls sunrpc intel_rapl_msr intel_rapl_common intel_uncore_frequency intel_uncore_frequency_common i10nm_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm mgag200 irqd
[ 2084.137829] CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Not tainted 5.14.0-427.37.1.el9_4.x86_64 #1
[ 2084.147039] Hardware name: Dell Inc. PowerEdge R750/0216NK, BIOS 1.13.2 12/19/2023
[ 2084.154604] Call Trace:
[ 2084.157058] <IRQ>
[ 2084.159080] dump_stack_lvl+0x34/0x48
[ 2084.162752] bad_page.cold+0x63/0x94
[ 2084.166333] check_new_pages+0xb3/0xe0
[ 2084.170083] rmqueue_bulk+0x2d2/0x9e0
[ 2084.173749] ? ktime_get+0x35/0xa0
[ 2084.177159] rmqueue_pcplist+0x13b/0x210
[ 2084.181081] rmqueue+0x7d3/0xd40
[ 2084.184316] ? xas_load+0x9/0xa0
[ 2084.187547] ? xas_find+0x183/0x1d0
[ 2084.191041] ? xa_find_after+0xd0/0x130
[ 2084.194879] ? intel_iommu_iotlb_sync_map+0x89/0xe0
[ 2084.199759] get_page_from_freelist+0x11f/0x530
[ 2084.204291] __alloc_pages+0xf2/0x250
[ 2084.207958] ice_alloc_rx_bufs+0xcc/0x1c0 [ice]
[ 2084.212543] ice_clean_rx_irq+0x631/0xa20 [ice]
[ 2084.217111] ice_napi_poll+0xdf/0x2a0 [ice]
[ 2084.221330] __napi_poll+0x27/0x170
[ 2084.224824] net_rx_action+0x233/0x2f0
[ 2084.228575] __do_softirq+0xc7/0x2ac
[ 2084.232155] __irq_exit_rcu+0xa1/0xc0
[ 2084.235821] common_interrupt+0x80/0xa0
[ 2084.239662] </IRQ>
[ 2084.241768] <TASK>
The fix is mostly about reverting what was done in commit 1dc1a7e7f410
("ice: Centrallize Rx buffer recycling") followed by proper timing on
page_count() storage and then removing the ice_rx_buf::act related logic
(which was mostly introduced for purposes from cited commit).
Special thanks to Xu Du for providing reproducer and Jacob Keller for
initial extensive analysis.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: stop storing XDP verdict within ice_rx_buf
ice: gather page_count()'s of each frag right before XDP prog call
ice: put Rx buffers after being done with current frame
====================
Link: https://patch.msgid.link/20250131185415.3741532-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Disable PCIe AER on the tg3 device on system reboot on a limited
list of Dell PowerEdge systems. This prevents a fatal PCIe AER event
on the tg3 device during the ACPI _PTS (prepare to sleep) method for
S5 on those systems. The _PTS is invoked by acpi_enter_sleep_state_prep()
as part of the kernel's reboot sequence as a result of commit
38f34dba806a ("PM: ACPI: reboot: Reinstate S5 for reboot").
There was an earlier fix for this problem by commit 2ca1c94ce0b6
("tg3: Disable tg3 device on system reboot to avoid triggering AER").
But it was discovered that this earlier fix caused a reboot hang
when some Dell PowerEdge servers were booted via ipxe. To address
this reboot hang, the earlier fix was essentially reverted by commit
9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF").
This re-exposed the tg3 PCIe AER on reboot problem.
This fix is not an ideal solution because the root cause of the AER
is in system firmware. Instead, it's a targeted work-around in the
tg3 driver.
Note also that the PCIe AER must be disabled on the tg3 device even
if the system is configured to use "firmware first" error handling.
V3:
- Fix sparse warning on improper comparison of pdev->current_state
- Adhere to netdev comment style
Fixes: 9fc3bc764334 ("tg3: power down device only on SYSTEM_POWER_OFF")
Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If XDP traffic runs on a CPU which is greater than or equal to
the number of the Tx queues of the NIC, then vmxnet3_xdp_get_tq()
always picks up queue 0 for transmission as it uses reciprocal scale
instead of simple modulo operation.
vmxnet3_xdp_xmit() and vmxnet3_xdp_xmit_frame() use the above
returned queue without any locking which can lead to race conditions
when multiple XDP xmits run in parallel on different CPU's.
This patch uses a simple module scheme when the current CPU equals or
exceeds the number of Tx queues on the NIC. It also adds locking in
vmxnet3_xdp_xmit() and vmxnet3_xdp_xmit_frame() functions.
Fixes: 54f00cce1178 ("vmxnet3: Add XDP support.")
Signed-off-by: Sankararaman Jayaraman <sankararaman.jayaraman@broadcom.com>
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250131042340.156547-1-sankararaman.jayaraman@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add check for the return value of devm_kzalloc() to guarantee the success
of allocation.
Fixes: 42c2eb6b1f43 ("ice: Implement devlink-rate API")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250131013832.24805-1-jiashengjiangcool@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some Wake-on-LAN modes such as WAKE_FILTER may only be supported by the MAC,
while others might be only supported by the PHY. Make sure that the .get_wol()
returns the union of both rather than only that of the PHY if the PHY supports
Wake-on-LAN.
When disabling Wake-on-LAN, make sure that this is done at both the PHY
and MAC level, rather than doing an early return from the PHY driver.
Fixes: 7e400ff35cbe ("net: bcmgenet: Add support for PHY-based Wake-on-LAN")
Fixes: 9ee09edc05f2 ("net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250129231342.35013-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Idea behind having ice_rx_buf::act was to simplify and speed up the Rx
data path by walking through buffers that were representing cleaned HW
Rx descriptors. Since it caused us a major headache recently and we
rolled back to old approach that 'puts' Rx buffers right after running
XDP prog/creating skb, this is useless now and should be removed.
Get rid of ice_rx_buf::act and related logic. We still need to take care
of a corner case where XDP program releases a particular fragment.
Make ice_run_xdp() to return its result and use it within
ice_put_rx_mbuf().
Fixes: 2fba7dc5157b ("ice: Add support for XDP multi-buffer on Rx side")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
If we store the pgcnt on few fragments while being in the middle of
gathering the whole frame and we stumbled upon DD bit not being set, we
terminate the NAPI Rx processing loop and come back later on. Then on
next NAPI execution we work on previously stored pgcnt.
Imagine that second half of page was used actively by networking stack
and by the time we came back, stack is not busy with this page anymore
and decremented the refcnt. The page reuse algorithm in this case should
be good to reuse the page but given the old refcnt it will not do so and
attempt to release the page via page_frag_cache_drain() with
pagecnt_bias used as an arg. This in turn will result in negative refcnt
on struct page, which was initially observed by Xu Du.
Therefore, move the page count storage from ice_get_rx_buf() to a place
where we are sure that whole frame has been collected, but before
calling XDP program as it internally can also change the page count of
fragments belonging to xdp_buff.
Fixes: ac0753391195 ("ice: Store page count inside ice_rx_buf")
Reported-and-tested-by: Xu Du <xudu@redhat.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Introduce a new helper ice_put_rx_mbuf() that will go through gathered
frags from current frame and will call ice_put_rx_buf() on them. Current
logic that was supposed to simplify and optimize the driver where we go
through a batch of all buffers processed in current NAPI instance turned
out to be broken for jumbo frames and very heavy load that was coming
from both multi-thread iperf and nginx/wrk pair between server and
client. The delay introduced by approach that we are dropping is simply
too big and we need to take the decision regarding page
recycling/releasing as quick as we can.
While at it, address an error path of ice_add_xdp_frag() - we were
missing buffer putting from day 1 there.
As a nice side effect we get rid of annoying and repetitive three-liner:
xdp->data = NULL;
rx_ring->first_desc = ntc;
rx_ring->nr_frags = 0;
by embedding it within introduced routine.
Fixes: 1dc1a7e7f410 ("ice: Centrallize Rx buffer recycling")
Reported-and-tested-by: Xu Du <xudu@redhat.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPSec, netfilter and Bluetooth.
Nothing really stands out, but as usual there's a slight concentration
of fixes for issues added in the last two weeks before the merge
window, and driver bugs from 6.13 which tend to get discovered upon
wider distribution.
Current release - regressions:
- net: revert RTNL changes in unregister_netdevice_many_notify()
- Bluetooth: fix possible infinite recursion of btusb_reset
- eth: adjust locking in some old drivers which protect their state
with spinlocks to avoid sleeping in atomic; core protects netdev
state with a mutex now
Previous releases - regressions:
- eth:
- mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node()
- bgmac: reduce max frame size to support just 1500 bytes; the
jumbo frame support would previously cause OOB writes, but now
fails outright
- mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted, avoid
false detection of MPTCP blackholing
Previous releases - always broken:
- mptcp: handle fastopen disconnect correctly
- xfrm:
- make sure skb->sk is a full sock before accessing its fields
- fix taking a lock with preempt disabled for RT kernels
- usb: ipheth: improve safety of packet metadata parsing; prevent
potential OOB accesses
- eth: renesas: fix missing rtnl lock in suspend/resume path"
* tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
MAINTAINERS: add Neal to TCP maintainers
net: revert RTNL changes in unregister_netdevice_many_notify()
net: hsr: fix fill_frame_info() regression vs VLAN packets
doc: mptcp: sysctl: blackhole_timeout is per-netns
mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted
netfilter: nf_tables: reject mismatching sum of field_len with set key length
net: sh_eth: Fix missing rtnl lock in suspend/resume path
net: ravb: Fix missing rtnl lock in suspend/resume path
selftests/net: Add test for loading devbound XDP program in generic mode
net: xdp: Disallow attaching device-bound programs in generic mode
tcp: correct handling of extreme memory squeeze
bgmac: reduce max frame size to support just MTU 1500
vsock/test: Add test for connect() retries
vsock/test: Add test for UAF due to socket unbinding
vsock/test: Introduce vsock_connect_fd()
vsock/test: Introduce vsock_bind()
vsock: Allow retrying on connect() failure
vsock: Keep the binding until socket destruction
Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection
Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming
...
|
|
Fix the suspend/resume path by ensuring the rtnl lock is held where
required. Calls to sh_eth_close, sh_eth_open and wol operations must be
performed under the rtnl lock to prevent conflicts with ongoing ndo
operations.
Fixes: b71af04676e9 ("sh_eth: add more PM methods")
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix the suspend/resume path by ensuring the rtnl lock is held where
required. Calls to ravb_open, ravb_close and wol operations must be
performed under the rtnl lock to prevent conflicts with ongoing ndo
operations.
Without this fix, the following warning is triggered:
[ 39.032969] =============================
[ 39.032983] WARNING: suspicious RCU usage
[ 39.033019] -----------------------------
[ 39.033033] drivers/net/phy/phy_device.c:2004 suspicious
rcu_dereference_protected() usage!
...
[ 39.033597] stack backtrace:
[ 39.033613] CPU: 0 UID: 0 PID: 174 Comm: python3 Not tainted
6.13.0-rc7-next-20250116-arm64-renesas-00002-g35245dfdc62c #7
[ 39.033623] Hardware name: Renesas SMARC EVK version 2 based on
r9a08g045s33 (DT)
[ 39.033628] Call trace:
[ 39.033633] show_stack+0x14/0x1c (C)
[ 39.033652] dump_stack_lvl+0xb4/0xc4
[ 39.033664] dump_stack+0x14/0x1c
[ 39.033671] lockdep_rcu_suspicious+0x16c/0x22c
[ 39.033682] phy_detach+0x160/0x190
[ 39.033694] phy_disconnect+0x40/0x54
[ 39.033703] ravb_close+0x6c/0x1cc
[ 39.033714] ravb_suspend+0x48/0x120
[ 39.033721] dpm_run_callback+0x4c/0x14c
[ 39.033731] device_suspend+0x11c/0x4dc
[ 39.033740] dpm_suspend+0xdc/0x214
[ 39.033748] dpm_suspend_start+0x48/0x60
[ 39.033758] suspend_devices_and_enter+0x124/0x574
[ 39.033769] pm_suspend+0x1ac/0x274
[ 39.033778] state_store+0x88/0x124
[ 39.033788] kobj_attr_store+0x14/0x24
[ 39.033798] sysfs_kf_write+0x48/0x6c
[ 39.033808] kernfs_fop_write_iter+0x118/0x1a8
[ 39.033817] vfs_write+0x27c/0x378
[ 39.033825] ksys_write+0x64/0xf4
[ 39.033833] __arm64_sys_write+0x18/0x20
[ 39.033841] invoke_syscall+0x44/0x104
[ 39.033852] el0_svc_common.constprop.0+0xb4/0xd4
[ 39.033862] do_el0_svc+0x18/0x20
[ 39.033870] el0_svc+0x3c/0xf0
[ 39.033880] el0t_64_sync_handler+0xc0/0xc4
[ 39.033888] el0t_64_sync+0x154/0x158
[ 39.041274] ravb 11c30000.ethernet eth0: Link is Down
Reported-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Closes: https://lore.kernel.org/netdev/4c6419d8-c06b-495c-b987-d66c2e1ff848@tuxon.dev/
Fixes: 0184165b2f42 ("ravb: add sleep PM suspend/resume support")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
bgmac allocates new replacement buffer before handling each received
frame. Allocating & DMA-preparing 9724 B each time consumes a lot of CPU
time. Ideally bgmac should just respect currently set MTU but it isn't
the case right now. For now just revert back to the old limited frame
size.
This change bumps NAT masquerade speed by ~95%.
Since commit 8218f62c9c9b ("mm: page_frag: use initial zero offset for
page_frag_alloc_align()"), the bgmac driver fails to open its network
interface successfully and runs out of memory in the following call
stack:
bgmac_open
-> bgmac_dma_init
-> bgmac_dma_rx_skb_for_slot
-> netdev_alloc_frag
BGMAC_RX_ALLOC_SIZE = 10048 and PAGE_FRAG_CACHE_MAX_SIZE = 32768.
Eventually we land into __page_frag_alloc_align() with the following
parameters across multiple successive calls:
__page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=0
__page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=10048
__page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=20096
__page_frag_alloc_align: fragsz=10048, align_mask=-1, size=32768, offset=30144
So in that case we do indeed have offset + fragsz (40192) > size (32768)
and so we would eventually return NULL. Reverting to the older 1500
bytes MTU allows the network driver to be usable again.
Fixes: 8c7da63978f1 ("bgmac: configure MTU and add support for frames beyond 8192 byte size")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[florian: expand commit message about recent commits]
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250127175159.1788246-1-florian.fainelli@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
|
|
The referenced fix is incomplete. It correctly computes
bond_dev->gso_partial_features across slaves, but unfortunately
netdev_fix_features discards gso_partial_features from the feature set
if NETIF_F_GSO_PARTIAL isn't set in bond_dev->features.
This is visible with ethtool -k bond0 | grep esp:
tx-esp-segmentation: off [requested on]
esp-hw-offload: on
esp-tx-csum-hw-offload: on
This patch reworks the bonding GSO offload support by:
- making aggregating gso_partial_features across slaves similar to the
other feature sets (this part is a no-op).
- advertising the default partial gso features on empty bond devs, same
as with other feature sets (also a no-op).
- adding NETIF_F_GSO_PARTIAL to hw_enc_features filtered across slaves.
- adding NETIF_F_GSO_PARTIAL to features in bond_setup()
With all of these, 'ethtool -k bond0 | grep esp' now reports:
tx-esp-segmentation: on
esp-hw-offload: on
esp-tx-csum-hw-offload: on
Fixes: 4861333b4217 ("bonding: add ESP offload features when slaves support")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20250127104147.759658-1-cratiu@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When Tx/Rx FIFO size is not specified in advance, the driver checks if
the value is zero and sets the hardware capability value in functions
where that value is used.
Consolidate the check and settings into function stmmac_hw_init() and
remove redundant other statements.
If FIFO size is zero and the hardware capability also doesn't have upper
limit values, return with an error message.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Tx/Rx FIFO size is specified by the parameter "{tx,rx}-fifo-depth" from
stmmac_platform layer.
However, these values are constrained by upper limits determined by the
capabilities of each hardware feature. There is a risk that the upper
bits will be truncated due to the calculation, so it's appropriate to
limit them to the upper limit values and display a warning message.
This only works if the hardware capability has the upper limit values.
Fixes: e7877f52fd4a ("stmmac: Read tx-fifo-depth and rx-fifo-depth from the devicetree")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The number of MTL queues to use is specified by the parameter
"snps,{tx,rx}-queues-to-use" from stmmac_platform layer.
However, the maximum numbers of queues are constrained by upper limits
determined by the capability of each hardware feature. It's appropriate
to limit the values not to exceed the upper limit values and display
a warning message.
This only works if the hardware capability has the upper limit values.
Fixes: d976a525c371 ("net: stmmac: multiple queues dt configuration")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Clarify that the "NCM" implementation in `ipheth` is very limited, as
iOS devices aren't compatible with the CDC NCM specification in regular
tethering mode.
For a standards-compliant implementation, one shall turn to
the `cdc_ncm` module.
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix an out-of-bounds DPE read, limit the number of processed DPEs to
the amount that fits into the fixed-size NDP16 header.
Fixes: a2d274c62e44 ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Originally, the total NCM header size was computed as the sum of two
vaguely labelled constants. While accurate, it wasn't particularly clear
where they were coming from.
Use sizes of existing NCM structs where available. Define the total
NDP16 size based on the maximum amount of DPEs that can fit into the
iOS-specific fixed-size header.
This change does not fix any particular issue. Rather, it introduces
intermediate constants that will simplify subsequent commits.
It should also make it clearer for the reader where the constant values
come from.
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce an rx_error label to reduce repetitions in the header
signature checks.
Store wDatagramIndex and wDatagramLength after endianness conversion to
avoid repeated le16_to_cpu() calls.
Rewrite the loop to return on a null trailing DPE, which is required
by the CDC NCM spec. In case it is missing, fall through to rx_error.
This change does not fix any particular issue. Its purpose is to
simplify a subsequent commit that fixes a potential OoB read by limiting
the maximum amount of processed DPEs.
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Original code allowed for the start of NDP16 to be anywhere within the
URB based on the `wNdpIndex` value in NTH16. Only the start position of
NDP16 was checked, so it was possible for even the fixed-length part
of NDP16 to extend past the end of URB, leading to an out-of-bounds
read.
On iOS devices, the NDP16 header always directly follows NTH16. Rely on
and check for this specific format.
This, along with NCM-specific minimal URB length check that already
exists, will ensure that the fixed-length part of NDP16 plus a set
amount of DPEs fit within the URB.
Note that this commit alone does not fully address the OoB read.
The limit on the amount of DPEs needs to be enforced separately.
Fixes: a2d274c62e44 ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
By definition, a DPE points at the start of a network frame/datagram.
Thus it makes no sense for it to point at anything that's part of the
NCM header. It is not a security issue, but merely an indication of
a malformed DPE.
Enforce that all DPEs point at the data portion of the URB, past the
NCM header.
Fixes: a2d274c62e44 ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Originally, it was possible for the DPE length check to overflow if
wDatagramIndex + wDatagramLength > U16_MAX. This could lead to an OoB
read.
Move the wDatagramIndex term to the other side of the inequality.
An existing condition ensures that wDatagramIndex < urb->actual_length.
Fixes: a2d274c62e44 ("usbnet: ipheth: add CDC NCM support")
Cc: stable@vger.kernel.org
Signed-off-by: Foster Snowhill <forst@pen.gy>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Syzkaller reports [1] encountering a common issue of utilizing a wrong
usb endpoint type during URB submitting stage. This, in turn, triggers
a warning shown below.
For now, enable simple endpoint checking (specifically, bulk and
interrupt eps, testing control one is not essential) to mitigate
the issue with a view to do other related cosmetic changes later,
if they are necessary.
[1] Syzkaller report:
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 1 PID: 2586 at drivers/usb/core/urb.c:503 usb_submit_urb+0xe4b/0x1730 driv>
Modules linked in:
CPU: 1 UID: 0 PID: 2586 Comm: dhcpcd Not tainted 6.11.0-rc4-syzkaller-00069-gfc88bb11617>
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:usb_submit_urb+0xe4b/0x1730 drivers/usb/core/urb.c:503
Code: 84 3c 02 00 00 e8 05 e4 fc fc 4c 89 ef e8 fd 25 d7 fe 45 89 e0 89 e9 4c 89 f2 48 8>
RSP: 0018:ffffc9000441f740 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff888112487a00 RCX: ffffffff811a99a9
RDX: ffff88810df6ba80 RSI: ffffffff811a99b6 RDI: 0000000000000001
RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: ffff8881023bf0a8 R14: ffff888112452a20 R15: ffff888112487a7c
FS: 00007fc04eea5740(0000) GS:ffff8881f6300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0a1de9f870 CR3: 000000010dbd0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
rtl8150_open+0x300/0xe30 drivers/net/usb/rtl8150.c:733
__dev_open+0x2d4/0x4e0 net/core/dev.c:1474
__dev_change_flags+0x561/0x720 net/core/dev.c:8838
dev_change_flags+0x8f/0x160 net/core/dev.c:8910
devinet_ioctl+0x127a/0x1f10 net/ipv4/devinet.c:1177
inet_ioctl+0x3aa/0x3f0 net/ipv4/af_inet.c:1003
sock_do_ioctl+0x116/0x280 net/socket.c:1222
sock_ioctl+0x22e/0x6c0 net/socket.c:1341
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x193/0x220 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc04ef73d49
...
This change has not been tested on real hardware.
Reported-and-tested-by: syzbot+d7e968426f644b567e31@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d7e968426f644b567e31
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250124093020.234642-1-n.zhandarovich@fintech.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-01-24 (idpf, ice, iavf)
For idpf:
Emil adds memory barrier when accessing control queue descriptors and
restores call to idpf_vc_xn_shutdown() when resetting.
Manoj Vishwanathan expands transaction lock to properly protect xn->salt
value and adds additional debugging information.
Marco Leogrande converts workqueues to be unbound.
For ice:
Przemek fixes incorrect size use for array.
Mateusz removes reporting of invalid parameter and value.
For iavf:
Michal adjusts some VLAN changes to occur without a PF call to avoid
timing issues with the calls.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: allow changing VLAN state without calling PF
ice: remove invalid parameter of equalizer
ice: fix ice_parser_rt::bst_key array size
idpf: add more info during virtchnl transaction timeout/salt mismatch
idpf: convert workqueues to unbound
idpf: Acquire the lock before accessing the xn->salt
idpf: fix transaction timeouts on reset
idpf: add read memory barrier when checking descriptor done bit
====================
Link: https://patch.msgid.link/20250124213213.1328775-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dm is netdev private data and it cannot be
used after free_netdev() call. Using dm after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.
This is similar to the issue fixed in commit
ad297cd2db89 ("net: qcom/emac: fix UAF in emac_remove").
This bug is detected by our static analysis tool.
Fixes: cf9e60aa69ae ("net: davicom: Fix regulator not turned off on driver removal")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
CC: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250123214213.623518-1-chenyuan0y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In application note (AN13663) for TJA1120, on page 30, there's a figure
with average PHY startup timing values following software reset.
The time it takes for SMI to become operational after software reset
ranges roughly from 500 us to 1500 us.
This commit adds 2000 us delay after MDIO write which triggers software
reset. Without this delay, soft_reset function returns an error and
prevents successful PHY init.
Cc: stable@vger.kernel.org
Fixes: b050f2f15e04 ("phy: nxp-c45: add driver for tja1103")
Signed-off-by: Milos Reljin <milos_reljin@outlook.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/AM8P250MB0124D258E5A71041AF2CC322E1E32@AM8P250MB0124.EURP250.PROD.OUTLOOK.COM
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
KMSAN reported an uninit-value access in vxlan_vnifilter_dump() [1].
If the length of the netlink message payload is less than
sizeof(struct tunnel_msg), vxlan_vnifilter_dump() accesses bytes
beyond the message. This can lead to uninit-value access. Fix this by
returning an error in such situations.
[1]
BUG: KMSAN: uninit-value in vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422
vxlan_vnifilter_dump+0x328/0x920 drivers/net/vxlan/vxlan_vnifilter.c:422
rtnl_dumpit+0xd5/0x2f0 net/core/rtnetlink.c:6786
netlink_dump+0x93e/0x15f0 net/netlink/af_netlink.c:2317
__netlink_dump_start+0x716/0xd60 net/netlink/af_netlink.c:2432
netlink_dump_start include/linux/netlink.h:340 [inline]
rtnetlink_dump_start net/core/rtnetlink.c:6815 [inline]
rtnetlink_rcv_msg+0x1256/0x14a0 net/core/rtnetlink.c:6882
netlink_rcv_skb+0x467/0x660 net/netlink/af_netlink.c:2542
rtnetlink_rcv+0x35/0x40 net/core/rtnetlink.c:6944
netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline]
netlink_unicast+0xed6/0x1290 net/netlink/af_netlink.c:1347
netlink_sendmsg+0x1092/0x1230 net/netlink/af_netlink.c:1891
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:726
____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583
___sys_sendmsg+0x271/0x3b0 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672
x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4110 [inline]
slab_alloc_node mm/slub.c:4153 [inline]
kmem_cache_alloc_node_noprof+0x800/0xe80 mm/slub.c:4205
kmalloc_reserve+0x13b/0x4b0 net/core/skbuff.c:587
__alloc_skb+0x347/0x7d0 net/core/skbuff.c:678
alloc_skb include/linux/skbuff.h:1323 [inline]
netlink_alloc_large_skb+0xa5/0x280 net/netlink/af_netlink.c:1196
netlink_sendmsg+0xac9/0x1230 net/netlink/af_netlink.c:1866
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg+0x330/0x3d0 net/socket.c:726
____sys_sendmsg+0x7f4/0xb50 net/socket.c:2583
___sys_sendmsg+0x271/0x3b0 net/socket.c:2637
__sys_sendmsg net/socket.c:2669 [inline]
__do_sys_sendmsg net/socket.c:2674 [inline]
__se_sys_sendmsg net/socket.c:2672 [inline]
__x64_sys_sendmsg+0x211/0x3e0 net/socket.c:2672
x64_sys_call+0x3878/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 0 UID: 0 PID: 30991 Comm: syz.4.10630 Not tainted 6.12.0-10694-gc44daa7e3c73 #29
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250123145746.785768-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzbot reports:
BUG: KMSAN: uninit-value in nsim_get_ringparam+0xa8/0xe0 drivers/net/netdevsim/ethtool.c:77
nsim_get_ringparam+0xa8/0xe0 drivers/net/netdevsim/ethtool.c:77
ethtool_set_ringparam+0x268/0x570 net/ethtool/ioctl.c:2072
__dev_ethtool net/ethtool/ioctl.c:3209 [inline]
dev_ethtool+0x126d/0x2a40 net/ethtool/ioctl.c:3398
dev_ioctl+0xb0e/0x1280 net/core/dev_ioctl.c:759
This is the SET path, where we call GET to either check user request
against max values, or check if any of the settings will change.
The logic in netdevsim is trying to report the default (ENABLED)
if user has not requested any specific setting. The user setting
is recorded in dev->cfg, don't depend on kernel_ringparam being
pre-populated with it.
Fixes: 928459bbda19 ("net: ethtool: populate the default HDS params in the core")
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+b3bcd80232d00091e061@syzkaller.appspotmail.com
Tested-by: syzbot+b3bcd80232d00091e061@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20250123221410.1067678-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mt76 does a lot of:
local_bh_disable();
napi_enable(...napi);
napi_schedule(...napi);
local_bh_enable();
local_bh_disable() is not a real lock, its most likely taken
because napi_schedule() requires that we invoke softirqs at
some point. napi_enable() needs to take a mutex, so move it
from under the BH protection.
Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250124031841.1179756-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
napi_enable() may sleep now, take netdev_lock() before rp->lock.
napi_enable() is hidden inside init_registers().
Note that this patch orders netdev_lock after rp->task_lock,
to avoid having to take the netdev_lock() around disable path.
Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250124031841.1179756-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
napi_enable() may sleep now, take netdev_lock() before np->lock.
Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250124031841.1179756-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
napi_enable() may sleep now, take netdev_lock() before tp->lock and
tp->rx_lock.
Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Link: https://patch.msgid.link/20250124031841.1179756-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
napi_enable() may sleep now, take netdev_lock() before np->lock.
Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250124031841.1179756-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The local helpers for calling napi_enable() and napi_disable()
don't serve much purpose and they will complicate the fix in
the subsequent patch. Remove them, call the core functions
directly.
Acked-by: Zhu Yanjun <zyjzyj2000@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250124031841.1179756-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tg3 has a spin lock protecting most of the config,
switch to taking netdev_lock() explicitly on enable/start
paths. Disable/stop paths seem to not be under the spin
lock (since napi_disable() already needs to sleep),
so leave that side as is.
tg3_restart_hw() releases and re-takes the spin lock,
we need to do the same because dev_close() needs to
take netdev_lock().
Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/dcfd56bc-de32-4b11-9e19-d8bd1543745d@stanley.mountain
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250124031841.1179756-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
kvzalloc_node is not doing a runtime check on the node argument
(__alloc_pages_node_noprof does have a VM_BUG_ON, but it expands to
nothing on !CONFIG_DEBUG_VM builds), so doing any ethtool/netlink
operation that calls mlx5e_open on a CPU that's larger that MAX_NUMNODES
triggers OOB access and panic (see the trace below).
Add missing cpu_to_node call to convert cpu id to node id.
[ 165.427394] mlx5_core 0000:5c:00.0 beth1: Link up
[ 166.479327] BUG: unable to handle page fault for address: 0000000800000010
[ 166.494592] #PF: supervisor read access in kernel mode
[ 166.505995] #PF: error_code(0x0000) - not-present page
...
[ 166.816958] Call Trace:
[ 166.822380] <TASK>
[ 166.827034] ? __die_body+0x64/0xb0
[ 166.834774] ? page_fault_oops+0x2cd/0x3f0
[ 166.843862] ? exc_page_fault+0x63/0x130
[ 166.852564] ? asm_exc_page_fault+0x22/0x30
[ 166.861843] ? __kvmalloc_node_noprof+0x43/0xd0
[ 166.871897] ? get_partial_node+0x1c/0x320
[ 166.880983] ? deactivate_slab+0x269/0x2b0
[ 166.890069] ___slab_alloc+0x521/0xa90
[ 166.898389] ? __kvmalloc_node_noprof+0x43/0xd0
[ 166.908442] __kmalloc_node_noprof+0x216/0x3f0
[ 166.918302] ? __kvmalloc_node_noprof+0x43/0xd0
[ 166.928354] __kvmalloc_node_noprof+0x43/0xd0
[ 166.938021] mlx5e_open_channels+0x5e2/0xc00
[ 166.947496] mlx5e_open_locked+0x3e/0xf0
[ 166.956201] mlx5e_open+0x23/0x50
[ 166.963551] __dev_open+0x114/0x1c0
[ 166.971292] __dev_change_flags+0xa2/0x1b0
[ 166.980378] dev_change_flags+0x21/0x60
[ 166.988887] do_setlink+0x38d/0xf20
[ 166.996628] ? ep_poll_callback+0x1b9/0x240
[ 167.005910] ? __nla_validate_parse.llvm.10713395753544950386+0x80/0xd70
[ 167.020782] ? __wake_up_sync_key+0x52/0x80
[ 167.030066] ? __mutex_lock+0xff/0x550
[ 167.038382] ? security_capable+0x50/0x90
[ 167.047279] rtnl_setlink+0x1c9/0x210
[ 167.055403] ? ep_poll_callback+0x1b9/0x240
[ 167.064684] ? security_capable+0x50/0x90
[ 167.073579] rtnetlink_rcv_msg+0x2f9/0x310
[ 167.082667] ? rtnetlink_bind+0x30/0x30
[ 167.091173] netlink_rcv_skb+0xb1/0xe0
[ 167.099492] netlink_unicast+0x20f/0x2e0
[ 167.108191] netlink_sendmsg+0x389/0x420
[ 167.116896] __sys_sendto+0x158/0x1c0
[ 167.125024] __x64_sys_sendto+0x22/0x30
[ 167.133534] do_syscall_64+0x63/0x130
[ 167.141657] ? __irq_exit_rcu.llvm.17843942359718260576+0x52/0xd0
[ 167.155181] entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: bb135e40129d ("net/mlx5e: move XDP_REDIRECT sq to dynamic allocation")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250123000407.3464715-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot discovered that we remove the debugfs files after we free
the netdev. Try to clean up the relevant dir while the device
is still around.
Reported-by: syzbot+2e5de9e3ab986b71d2bf@syzkaller.appspotmail.com
Fixes: 424be63ad831 ("netdevsim: add UDP tunnel port offload support")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250122224503.762705-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Mainly individually changelogged singleton patches. The patch series
in this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap
library code
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms
some cleanup and Rust preparation in the xarray library code
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven
fixes pathnames in some code comments
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses
the new secs_to_jiffies() in various places where that is
appropriate
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API
- "Convert ocfs2 to use folios" from Matthew Wilcox does that
- "Remove get_task_comm() and print task comm directly" from Yafang
Shao removes now-unneeded calls to get_task_comm() in various
places
- "squashfs: reduce memory usage and update docs" from Phillip
Lougher implements some memory savings in squashfs and performs
some maintainability work
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented
with a corrupted image
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger
- "minmax.h: Cleanups and minor optimisations" from David Laight does
some maintenance work on the min/max library code
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance
work on the xarray library code"
* tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits)
ocfs2: use str_yes_no() and str_no_yes() helper functions
include/linux/lz4.h: add some missing macros
Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent
Xarray: remove repeat check in xas_squash_marks()
Xarray: distinguish large entries correctly in xas_split_alloc()
Xarray: move forward index correctly in xas_pause()
Xarray: do not return sibling entries from xas_find_marked()
ipc/util.c: complete the kernel-doc function descriptions
gcov: clang: use correct function param names
latencytop: use correct kernel-doc format for func params
minmax.h: remove some #defines that are only expanded once
minmax.h: simplify the variants of clamp()
minmax.h: move all the clamp() definitions after the min/max() ones
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
minmax.h: reduce the #define expansion of min(), max() and clamp()
minmax.h: update some comments
minmax.h: add whitespace around operators and after commas
nilfs2: do not update mtime of renamed directory that is not moved
nilfs2: handle errors that nilfs_prepare_chunk() may return
CREDITS: fix spelling mistake
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Batch sizing of multiple BARs while memory decoding is disabled
instead of disabling/enabling decoding for each BAR individually;
this optimizes virtualized environments where toggling decoding
enable is expensive (Alex Williamson)
- Add host bridge .enable_device() and .disable_device() hooks for
bridges that need to configure things like Requester ID to StreamID
mapping when enabling devices (Frank Li)
- Extend struct pci_ecam_ops with .enable_device() and
.disable_device() hooks so drivers that use pci_host_common_probe()
instead of their own .probe() have a way to set the
.enable_device() callbacks (Marc Zyngier)
- Drop 'No bus range found' message so we don't complain when DTs
don't specify the default 'bus-range = <0x00 0xff>' (Bjorn Helgaas)
- Rename the drivers/pci/of_property.c struct of_pci_range to
of_pci_range_entry to avoid confusion with the global of_pci_range
in include/linux/of_address.h (Bjorn Helgaas)
Driver binding:
- Update resource request API documentation to encourage callers to
supply a driver name when requesting resources (Philipp Stanner)
- Export pci_intx_unmanaged() and pcim_intx() (always managed) so
callers of pci_intx() (which is sometimes managed) can explicitly
choose the one they need (Philipp Stanner)
- Convert drivers from pci_intx() to always-managed pcim_intx() or
never-managed pci_intx_unmanaged(): amd_sfh, ata (ahci, ata_piix,
pata_rdc, sata_sil24, sata_sis, sata_uli, sata_vsc), bnx2x, bna,
ntb, qtnfmac, rtsx, tifm_7xx1, vfio, xen-pciback (Philipp Stanner)
- Remove pci_intx_unmanaged() since pci_intx() is now always
unmanaged and pcim_intx() is always managed (Philipp Stanner)
Error handling:
- Unexport pcie_read_tlp_log() to encourage drivers to use PCI core
logging rather than building their own (Ilpo Järvinen)
- Move TLP Log handling to its own file (Ilpo Järvinen)
- Store number of supported End-End TLP Prefixes always so we can
read the correct number of DWORDs from the TLP Prefix Log (Ilpo
Järvinen)
- Read TLP Prefixes in addition to the Header Log in
pcie_read_tlp_log() (Ilpo Järvinen)
- Add pcie_print_tlp_log() to consolidate printing of TLP Header and
Prefix Log (Ilpo Järvinen)
- Quirk the Intel Raptor Lake-P PIO log size to accommodate vendor
BIOSes that don't configure it correctly (Takashi Iwai)
ASPM:
- Save parent L1 PM Substates config so when we restore it along with
an endpoint's config, the parent info isn't junk (Jian-Hong Pan)
Power management:
- Avoid D3 for Root Ports on TUXEDO Sirius Gen1 with old BIOS because
the system can't wake up from suspend (Werner Sembach)
Endpoint framework:
- Destroy the EPC device in devm_pci_epc_destroy(), which previously
didn't call devres_release() (Zijun Hu)
- Finish virtual EP removal in pci_epf_remove_vepf(), which
previously caused a subsequent pci_epf_add_vepf() to fail with
-EBUSY (Zijun Hu)
- Write BAR_MASK before iATU registers in pci_epc_set_bar() so we
don't depend on the BAR_MASK reset value being larger than the
requested BAR size (Niklas Cassel)
- Prevent changing BAR size/flags in pci_epc_set_bar() to prevent
reads from bypassing the iATU if we reduced the BAR size (Niklas
Cassel)
- Verify address alignment when programming iATU so we don't attempt
to write bits that are read-only because of the BAR size, which
could lead to directing accesses to the wrong address (Niklas
Cassel)
- Implement artpec6 pci_epc_features so we can rely on all drivers
supporting it so we can use it in EPC core code (Niklas Cassel)
- Check for BARs of fixed size to prevent endpoint drivers from
trying to change their size (Niklas Cassel)
- Verify that requested BAR size is a power of two when endpoint
driver sets the BAR (Niklas Cassel)
Endpoint framework tests:
- Clear pci-epf-test dma_chan_rx, not dma_chan_tx, after freeing
dma_chan_rx (Mohamed Khalfella)
- Correct the DMA MEMCPY test so it doesn't fail if the Endpoint
supports both DMA_PRIVATE and DMA_MEMCPY (Manivannan Sadhasivam)
- Add pci-epf-test and pci_endpoint_test support for capabilities
(Niklas Cassel)
- Add Endpoint test for consecutive BARs (Niklas Cassel)
- Remove redundant comparison from Endpoint BAR test because a > 1MB
BAR can always be exactly covered by iterating with a 1MB buffer
(Hans Zhang)
- Move and convert PCI Endpoint tests from tools/pci to Kselftests
(Manivannan Sadhasivam)
Apple PCIe controller driver:
- Convert StreamID mapping configuration from a bus notifier to the
.enable_device() and .disable_device() callbacks (Marc Zyngier)
Freescale i.MX6 PCIe controller driver:
- Add Requester ID to StreamID mapping configuration when enabling
devices (Frank Li)
- Use DWC core suspend/resume functions for imx6 (Frank Li)
- Add suspend/resume support for i.MX8MQ, i.MX8Q, and i.MX95 (Richard
Zhu)
- Add DT compatible string 'fsl,imx8q-pcie-ep' and driver support for
i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) Endpoints (Frank
Li)
- Add DT binding for optional i.MX95 Refclk and driver support to
enable it if the platform hasn't enabled it (Richard Zhu)
- Configure PHY based on controller being in Root Complex or Endpoint
mode (Frank Li)
- Rely on dbi2 and iATU base addresses from DT via
dw_pcie_get_resources() instead of hardcoding them (Richard Zhu)
- Deassert apps_reset in imx_pcie_deassert_core_reset() since it is
asserted in imx_pcie_assert_core_reset() (Richard Zhu)
- Add missing reference clock enable or disable logic for IMX6SX,
IMX7D, IMX8MM (Richard Zhu)
- Remove redundant imx7d_pcie_init_phy() since
imx7d_pcie_enable_ref_clk() does the same thing (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead
of syscon_regmap_lookup_by_phandle() followed by
of_property_read_u32_array() (Krzysztof Kozlowski)
Marvell MVEBU PCIe controller driver:
- Add MODULE_DEVICE_TABLE() to enable module autoloading (Liao Chen)
MediaTek PCIe Gen3 controller driver:
- Use clk_bulk_prepare_enable() instead of separate
clk_bulk_prepare() and clk_bulk_enable() (Lorenzo Bianconi)
- Rearrange reset assert/deassert so they're both done in the
*_power_up() callbacks (Lorenzo Bianconi)
- Document that Airoha EN7581 requires PHY init and power-on before
PHY reset deassert, unlike other MediaTek Gen3 controllers (Lorenzo
Bianconi)
- Move Airoha EN7581 post-reset delay from the en7581 clock .enable()
method to mtk_pcie_en7581_power_up() (Lorenzo Bianconi)
- Sleep instead of delay during Airoha EN7581 power-up, since this is
a non-atomic context (Lorenzo Bianconi)
- Skip PERST# assertion on Airoha EN7581 during probe and
suspend/resume to avoid a hardware defect (Lorenzo Bianconi)
- Enable async probe to reduce system startup time (Douglas Anderson)
Microchip PolarFlare PCIe controller driver:
- Set up the inbound address translation based on whether the
platform allows coherent or non-coherent DMA (Daire McNamara)
- Update DT binding such that platforms are DMA-coherent by default
and must specify 'dma-noncoherent' if needed (Conor Dooley)
Mobiveil PCIe controller driver:
- Convert mobiveil-pcie.txt to YAML and update 'interrupt-names'
and 'reg-names' (Frank Li)
Qualcomm PCIe controller driver:
- Add DT SM8550 and SM8650 optional 'global' interrupt for link
events (Neil Armstrong)
- Add DT 'compatible' strings for IPQ5424 PCIe controller (Manikanta
Mylavarapu)
- If 'global' IRQ is supported for detection of Link Up events, tell
DWC core not to wait for link up (Krishna chaitanya chundru)
Renesas R-Car PCIe controller driver:
- Avoid passing stack buffer as resource name (King Dix)
Rockchip PCIe controller driver:
- Simplify clock and reset handling by using bulk interfaces (Anand
Moon)
- Pass typed rockchip_pcie (not void) pointer to
rockchip_pcie_disable_clocks() (Anand Moon)
- Return -ENOMEM, not success, when pci_epc_mem_alloc_addr() fails
(Dan Carpenter)
Rockchip DesignWare PCIe controller driver:
- Use dll_link_up IRQ to detect Link Up and enumerate devices so
users don't have to manually rescan (Niklas Cassel)
- Tell DWC core not to wait for link up since the 'sys' interrupt is
required and detects Link Up events (Niklas Cassel)
Synopsys DesignWare PCIe controller driver:
- Don't wait for link up in DWC core if driver can detect Link Up
event (Krishna chaitanya chundru)
- Update ICC and OPP votes after Link Up events (Krishna chaitanya
chundru)
- Always stop link in dw_pcie_suspend_noirq(), which is required at
least for i.MX8QM to re-establish link on resume (Richard Zhu)
- Drop racy and unnecessary LTSSM state check before sending
PME_TURN_OFF message in dw_pcie_suspend_noirq() (Richard Zhu)
- Add struct of_pci_range.parent_bus_addr for devices that need their
immediate parent bus address, not the CPU address, e.g., to program
an internal Address Translation Unit (iATU) (Frank Li)
TI DRA7xx PCIe controller driver:
- Simplify by using syscon_regmap_lookup_by_phandle_args() instead of
syscon_regmap_lookup_by_phandle() followed by
of_parse_phandle_with_fixed_args() or of_property_read_u32_index()
(Krzysztof Kozlowski)
Xilinx Versal CPM PCIe controller driver:
- Add DT binding and driver support for Xilinx Versal CPM5
(Thippeswamy Havalige)
MicroSemi Switchtec management driver:
- Add Microchip PCI100X device IDs (Rakesh Babu Saladi)
Miscellaneous:
- Move reset related sysfs code from pci.c to pci-sysfs.c where other
similar code lives (Ilpo Järvinen)
- Simplify reset_method_store() memory management by using __free()
instead of explicit kfree() cleanup (Ilpo Järvinen)
- Constify struct bin_attribute for sysfs, VPD, P2PDMA, and the IBM
ACPI hotplug driver (Thomas Weißschuh)
- Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT (Dongdong
Zhang)
- Correct documentation of the 'config_acs=' kernel parameter
(Akihiko Odaki)"
* tag 'pci-v6.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (111 commits)
PCI: Batch BAR sizing operations
dt-bindings: PCI: microchip,pcie-host: Allow dma-noncoherent
PCI: microchip: Set inbound address translation for coherent or non-coherent mode
Documentation: Fix pci=config_acs= example
PCI: Remove redundant PCI_VSEC_HDR and PCI_VSEC_HDR_LEN_SHIFT
PCI: Don't include 'pm_wakeup.h' directly
selftests: pci_endpoint: Migrate to Kselftest framework
selftests: Move PCI Endpoint tests from tools/pci to Kselftests
misc: pci_endpoint_test: Fix IOCTL return value
dt-bindings: PCI: qcom: Document the IPQ5424 PCIe controller
dt-bindings: PCI: qcom,pcie-sm8550: Document 'global' interrupt
dt-bindings: PCI: mobiveil: Convert mobiveil-pcie.txt to YAML
PCI: switchtec: Add Microchip PCI100X device IDs
misc: pci_endpoint_test: Remove redundant 'remainder' test
misc: pci_endpoint_test: Add consecutive BAR test
misc: pci_endpoint_test: Add support for capabilities
PCI: endpoint: pci-epf-test: Add support for capabilities
PCI: endpoint: pci-epf-test: Fix check for DMA MEMCPY test
PCI: endpoint: pci-epf-test: Set dma_chan_rx pointer to NULL on error
PCI: dwc: Simplify config resource lookup
...
|
|
Pull rdma updates from Jason Gunthorpe:
"Lighter that normal, but the now usual collection of driver fixes and
small improvements:
- Small fixes and minor improvements to cxgb4, bnxt_re, rxe, srp,
efa, cxgb4
- Update mlx4 to use the new umem APIs, avoiding direct use of
scatterlist
- Support ROCEv2 in erdma
- Remove various uncalled functions, constify bin_attribute
- Provide core infrastructure to catch netdev events and route them
to drivers, consolidating duplicated driver code
- Fix rare race condition crashes in mlx5 ODP flows"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (63 commits)
RDMA/mlx5: Fix implicit ODP use after free
RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error
RDMA/qib: Constify 'struct bin_attribute'
RDMA/hfi1: Constify 'struct bin_attribute'
RDMA/rxe: Fix the warning "__rxe_cleanup+0x12c/0x170 [rdma_rxe]"
RDMA/cxgb4: Notify rdma stack for IB_EVENT_QP_LAST_WQE_REACHED event
RDMA/bnxt_re: Allocate dev_attr information dynamically
RDMA/bnxt_re: Pass the context for ulp_irq_stop
RDMA/bnxt_re: Add support to handle DCB_CONFIG_CHANGE event
RDMA/bnxt_re: Query firmware defaults of CC params during probe
RDMA/bnxt_re: Add Async event handling support
bnxt_en: Add ULP call to notify async events
RDMA/mlx5: Fix indirect mkey ODP page count
MAINTAINERS: Update the bnxt_re maintainers
RDMA/hns: Clean up the legacy CONFIG_INFINIBAND_HNS
RDMA/rtrs: Add missing deinit() call
RDMA/efa: Align interrupt related fields to same type
RDMA/bnxt_re: Fix to drop reference to the mmap entry in case of error
RDMA/mlx5: Fix link status down event for MPV
RDMA/erdma: Support create_ah/destroy_ah in non-sleepable contexts
...
|
|
First case:
> ip l a l $VF name vlanx type vlan id 100
> ip l d vlanx
> ip l a l $VF name vlanx type vlan id 100
As workqueue can be execute after sometime, there is a window to have
call trace like that:
- iavf_del_vlan
- iavf_add_vlan
- iavf_del_vlans (wq)
It means that our VLAN 100 will change the state from IAVF_VLAN_ACTIVE
to IAVF_VLAN_REMOVE (iavf_del_vlan). After that in iavf_add_vlan state
won't be changed because VLAN 100 is on the filter list. The final
result is that the VLAN 100 filter isn't added in hardware (no
iavf_add_vlans call).
To fix that change the state if the filter wasn't removed yet directly
to active. It is save as IAVF_VLAN_REMOVE means that virtchnl message
wasn't sent yet.
Second case:
> ip l a l $VF name vlanx type vlan id 100
Any type of VF reset ex. change trust
> ip l s $PF vf $VF_NUM trust on
> ip l d vlanx
> ip l a l $VF name vlanx type vlan id 100
In case of reset iavf driver is responsible for readding all filters
that are being used. To do that all VLAN filters state are changed to
IAVF_VLAN_ADD. Here is even longer window for changing VLAN state from
kernel side, as workqueue isn't called immediately. We can have call
trace like that:
- changing to IAVF_VLAN_ADD (after reset)
- iavf_del_vlan (called from kernel ops)
- iavf_del_vlans (wq)
Not exsisitng VLAN filters will be removed from hardware. It isn't a
bug, ice driver will handle it fine. However, we can have call trace
like that:
- changing to IAVF_VLAN_ADD (after reset)
- iavf_del_vlan (called from kernel ops)
- iavf_add_vlan (called from kernel ops)
- iavf_del_vlans (wq)
With fix for previous case we end up with no VLAN filters in hardware.
We have to remove VLAN filters if the state is IAVF_VLAN_ADD and delete
VLAN was called. It is save as IAVF_VLAN_ADD means that virtchnl message
wasn't sent yet.
Fixes: 0c0da0e95105 ("iavf: refactor VLAN filter states")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It occurred that in the commit 70838938e89c ("ice: Implement driver
functionality to dump serdes equalizer values") the invalid DRATE parameter
for reading has been added. The output of the command:
$ ethtool -d <ethX>
returns the garbage value in the place where DRATE value should be
stored.
Remove mentioned parameter to prevent return of corrupted data to
userspace.
Fixes: 70838938e89c ("ice: Implement driver functionality to dump serdes equalizer values")
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix &ice_parser_rt::bst_key size. It was wrongly set to 10 instead of 20
in the initial impl commit (see Fixes tag). All usage code assumed it was
of size 20. That was also the initial size present up to v2 of the intro
series [2], but halved by v3 [3] refactor described as "Replace magic
hardcoded values with macros." The introducing series was so big that
some ugliness was unnoticed, same for bugs :/
ICE_BST_KEY_TCAM_SIZE and ICE_BST_TCAM_KEY_SIZE were differing by one.
There was tmp variable @j in the scope of edited function, but was not
used in all places. This ugliness is now gone.
I'm moving ice_parser_rt::pg_prio a few positions up, to fill up one of
the holes in order to compensate for the added 10 bytes to the ::bst_key,
resulting in the same size of the whole as prior to the fix, and minimal
changes in the offsets of the fields.
Extend also the debug dump print of the key to cover all bytes. To not
have string with 20 "%02x" and 20 params, switch to
ice_debug_array_w_prefix().
This fix obsoletes Ahmed's attempt at [1].
[1] https://lore.kernel.org/intel-wired-lan/20240823230847.172295-1-ahmed.zaki@intel.com
[2] https://lore.kernel.org/intel-wired-lan/20230605054641.2865142-13-junfeng.guo@intel.com
[3] https://lore.kernel.org/intel-wired-lan/20230817093442.2576997-13-junfeng.guo@intel.com
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/intel-wired-lan/b1fb6ff9-b69e-4026-9988-3c783d86c2e0@stanley.mountain
Fixes: 9a4c07aaa0f5 ("ice: add parser execution main loop")
CC: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add more information related to the transaction like cookie, vc_op,
salt when transaction times out and include similar information
when transaction salt does not match.
Info output for transaction timeout:
-------------------
(op:5015 cookie:45fe vc_op:5015 salt:45 timeout:60000ms)
-------------------
before it was:
-------------------
(op 5015, 60000ms)
-------------------
Signed-off-by: Manoj Vishwanathan <manojvishy@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When a workqueue is created with `WQ_UNBOUND`, its work items are
served by special worker-pools, whose host workers are not bound to
any specific CPU. In the default configuration (i.e. when
`queue_delayed_work` and friends do not specify which CPU to run the
work item on), `WQ_UNBOUND` allows the work item to be executed on any
CPU in the same node of the CPU it was enqueued on. While this
solution potentially sacrifices locality, it avoids contention with
other processes that might dominate the CPU time of the processor the
work item was scheduled on.
This is not just a theoretical problem: in a particular scenario
misconfigured process was hogging most of the time from CPU0, leaving
less than 0.5% of its CPU time to the kworker. The IDPF workqueues
that were using the kworker on CPU0 suffered large completion delays
as a result, causing performance degradation, timeouts and eventual
system crash.
Tested:
* I have also run a manual test to gauge the performance
improvement. The test consists of an antagonist process
(`./stress --cpu 2`) consuming as much of CPU 0 as possible. This
process is run under `taskset 01` to bind it to CPU0, and its
priority is changed with `chrt -pQ 9900 10000 ${pid}` and
`renice -n -20 ${pid}` after start.
Then, the IDPF driver is forced to prefer CPU0 by editing all calls
to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0.
Finally, `ktraces` for the workqueue events are collected.
Without the current patch, the antagonist process can force
arbitrary delays between `workqueue_queue_work` and
`workqueue_execute_start`, that in my tests were as high as
`30ms`. With the current patch applied, the workqueue can be
migrated to another unloaded CPU in the same node, and, keeping
everything else equal, the maximum delay I could see was `6us`.
Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration")
Signed-off-by: Marco Leogrande <leogrande@google.com>
Signed-off-by: Manoj Vishwanathan <manojvishy@google.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
