summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2013-06-18ath9k: Add initvals required for CUS217Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Add PCI IDs for CUS217Sujith Manoharan
CUS217 is a card based on AR9462. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath10k: off by one sanity checkDan Carpenter
This should be >= ARRAY_SIZE() instead of > ARRAY_SIZE(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Modify IDs to identify CUS230Sujith Manoharan
CUS198 and CUS230 are similar cards, both are AR9485 + xLNA solutions. But, the subsystem IDs differ - identify CUS230 explicitly to make things clearer. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Add support for 5G-XLNA/AR9462Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Update AR9462 2.0 initvalsSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Convert a couple of debug messagesSujith Manoharan
Use the REGULATORY debug level to print the target power details. EEPROM can be used for other purposes and this spams the log. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18ath9k: Merge HWTIMER debug level with BTCOEXSujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-18Merge branch 'for-linville' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx
2013-06-18Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2013-06-18Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2013-06-17rtlwifi: rtl8192cu: Add new USB ID for TP-Link TL-WN8200NDLarry Finger
This is a new device for this driver. Reported-by: Tobias Kluge <zielscheibe@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Tobias Kluge <zielscheibe@gmail.com> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17ath9k: Fix ANI for AP modeSujith Manoharan
The commit "ath9k: Fix ANI monitoring" reverted an earlier commit that adjusted ANI to improve performance. But, this causes adverse effects in AP mode (as reported by Felix based on an OpenWrt report). Use the older INI/period configuration for now until more testing is done. Cc: Felix Fietkau <nbd@openwrt.org> Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17ath9k: Fix LNA gpio for AR9485Sujith Manoharan
The commit "ath9k: Add custom parameters for CUS198" didn't pass the correct gpio value to ath9k_hw_cfg_output(). Fix it. Reported-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17mwifiex: fix memory corruption when unsetting multicast listDaniel Drake
When trying to unset a previously-set multicast list (i.e. the new list has 0 entries), mwifiex_set_multicast_list() was calling down to mwifiex_request_set_multicast_list() while leaving mcast_list.num_multicast_addr as an uninitialized value. We were arriving at mwifiex_cmd_mac_multicast_adr() which would then proceed to do an often huge memcpy of mcast_list.num_multicast_addr*ETH_ALEN bytes, causing memory corruption and hard to debug crashes. Fix this by setting mcast_list.num_multicast_addr to 0 when no multicast list is provided. Similarly, fix up the logic in mwifiex_request_set_multicast_list() to unset the multicast list that was previously sent to the hardware in such cases. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17mwifiex: Add module parameter for regdomainAvinash Patil
Allow a regulatory domain country code to be specified at boot using a module argument. This overrides the firmware regulatory mode. This patch also enables uAP to operate in 11a mode with hostapd. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-17net: wireless: wl1251: Fix commenting styleSachin Kamat
Make the commenting style consistent with networking block comment style as suggested by checkpatch. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17net: wireless: wl1251: Use module_spi_driver macroSachin Kamat
module_spi_driver() eliminates some boiler plate and makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17net/wireless/ti/wlcore/spi: Use module_spi_driver to register driverPeter Huewe
Removing some boilerplate by using module_spi_driver instead of calling register and unregister in the otherwise empty init/exit functions Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wlcore: fix occasional AP TX stop after recoveryVictor Goldenshtein
The fw_status wasn't zeroed during allocation, resulting in uninitialized var usage, and finally causing AP traffic stop after recovery. The wrong value in fw_status_2->counters.tx_lnk_free_pkts led to a bad lnk->allocated_pkts calculation in wlcore_fw_status(), causing wl18xx_lnk_low_prio() to return FALSE (lnk->allocated_pkts > thold). This eventually blocked the link in wlcore_tx_work_locked(), as wl1271_skb_dequeue() continuously returned NULL. Fix it by zeroing wl->fw_status_1/2 during allocation. Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wlcore: hold jiffies in unsigned longArik Nemtsov
u32 can be incorrect (too small) for some architectures. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wlcore: cancel channel switch work on interface removalArik Nemtsov
Otherwise, if the work is pending, we might get a bad dereference after the interface is removed. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wlcore: set default_wep_key when configuredYoni Divinsky
When associating to an AP with WEP set the default key upon association by implementing the set_deafult_key_idx op. Fixes auto-arp sent with wrong key_idx bug. Signed-off-by: Yoni Divinsky <yoni.divinsky@ti.com> Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wl18xx: use locally administered MAC address if not available from fuseLuciano Coelho
In some R&D chips, the device may be left untrimmed and with the MAC address missing from fuse ROM. In order to support those devices, apply a random locally administered MAC address instead. Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wlcore: configure rates in multiple casesEliad Peller
The current code configures the peer caps only on BSS_CHANGED_HT notification. However, we have to configure the peer caps (and rates) even when HT is not enabled. Otherwise, the fw continues working with low rates. Configure the peer caps when sta_exists is true (i.e. when we extracted the sta rates, e.g. on association). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wlcore: move sysfs handling to a separate fileLuciano Coelho
Instead of doing all the sysfs file handling in the main file, move it to a new sysfs source file to reduce the amount of code in a single file. Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wlcore: some non-functional clean-ups in main.cLuciano Coelho
Remove unnecessary includes; remove duplicate and useless defines; fix copyright notice and remove some unnecessary line breaks. Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-17wl18xx: FDSP Code RAM Corruption fixIdo Reis
In PG2.0 there is an issue where PHY's FDSP Code RAM sometimes gets corrupted when exiting from ELP mode. This issue is related to FDSP Code RAM clock implementation. PG2.1 introduces a HW fix for this issue that requires the driver to change the FDSP Code Ram clock settings (mux it to ATGP clock instead of its own clock). This workaround uses PHY_FPGA_SPARE_1 register and is relevant to WL8 PG2.1 devices. The fix is also backward compatible with older PG2.0 devices where the register PHY_FPGA_SPARE_1 is not used and not connected. The fix is done in the wl18xx_pre_upload function (must be performed before uploading the FW code) and includes the following steps: 1. Disable FDSP clock 2. Set ATPG clock toward FDSP Code RAM rather than its own clock. 3. Re-enable FDSP clock Signed-off-by: Yair Shapira <yair.shapira@ti.com> Signed-off-by: Ido Reis <idor@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2013-06-14orinoco_usb: fix memory leak in ezusb_access_ltv() when device disconnectedAlexey Khoroshilov
If "device is disconnected" check occurs to be true in ezusb_access_ltv(), it just return -ENODEV. But that means request_context is leaked since there are no any references to it anymore. The patch adds a call to ezusb_request_context_put() before return. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-14ath9k: Add custom parameters for CUS198Sujith Manoharan
CUS198 is a card based on AR9485. There are differences between the base reference design HB125 and CUS198. Identify such cards based on the PCI subsystem IDs and set HW parameters appropriately. Addresses this bug - https://bugzilla.kernel.org/show_bug.cgi?id=49201 Cc: jkp@iki.fi Cc: gfmichaud@gmail.com Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-14Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-06-13Merge branch 'for-linville-ath10k' of git://github.com/kvalo/ath6klJohn W. Linville
2013-06-13Merge branch 'for-linville' of git://github.com/kvalo/ath6klJohn W. Linville
2013-06-13ath9k: Fix ANI trigger thresholdSujith Manoharan
Since raising/lowering the limits based on INI has been changed, the error limit for OFDM has to be 1000, not 3500. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-13carl9170: add support for the new rate control APIChristian Lamparter
With the new rate control API, the driver can now apply the tx rate to outgoing frames just before they are uploaded to the device. This is important because the rate control can now react to fading or improving links a bit sooner. Also, the driver no longer needs to sort the outgoing frames for sample attempts (which affected the size of A-MPDUs and the throughput of the link). For aggregated data frames, the driver (and rate control) needs only to calculate and apply a single set of tx rates to every subframe of the whole aggregate. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-13brcmfmac: free primary net_device when brcmf_bus_start() failsArend van Spriel
When initialization within brcmf_bus_start() fails on steps before the brcmf_net_attach() the net_device for the primary interface needs to be freed. This patch resolves a panic during kernel boot as reported by Stephen Warren. ref.: http://mid.gmane.org/51AD1F22.2080004@wwwdotorg.org Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-13iwlwifi: pcie: wake the queue if stopped when being unmappedEmmanuel Grumbach
When the queue is unmapped while it was so loaded that mac80211's was stopped, we need to wake the queue after having freed all the packets in the queue. Not doing so can result in weird stuff like: * run lots of traffic (mac80211's queue gets stopped) * RFKILL * de-assert RFKILL * no traffic Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-13iwlwifi: pcie: fix race in queue unmappingEmmanuel Grumbach
When a queue is disabled, it frees all its entries. Later, the op_mode might still get notifications from the firmware that triggers to free entries in the tx queue. The transport should be prepared for these races and know to ignore reclaim calls on queues that have been disabled and whose entries have been freed. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-13iwlwifi: mvm: remove obsolete commentEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-13iwlwifi: mvm: take the seqno from packet if transmit failedEmmanuel Grumbach
The fw is unreliable in all the cases in which the packet wasn't sent. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-13iwlwifi: create opmode/device dependenciesJohannes Berg
The older devices (pre-7000/3000 series) all only work with the DVM opmode due to firmware availability, while newer ones will only work with the MVM opmode for the same reason. When building a driver that only has one of MVM or DVM, there's no reason to build the device support and have the PCIe IDs for all devices since they can't be used anyway, so avoid that. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-13iwlwifi: mvm: mark scratch area in TX commandJohannes Berg
Give the scratch area a sub structure so it's marked explicitly and it is obvious which part it is. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-13iwlwifi: reduce debug ifdefs using the optimiserJohannes Berg
Instead of using #ifdef CONFIG_IWLWIFI_DEBUG, remove the iwlwifi_mod_params.debug_level variable completely and make iwl_have_debug_level() always return false in the non-debug case. This way, the optimiser will elide all code for it automatically without having to add #ifdefs. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-13iwlwifi: remove calib channel section from PHY DBDavid Spinadel
Remove calibration per-channel data as it's no longer used. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-13iwlwifi: mvm: removed an unused parameter from a functionOren Givon
Remove the unused iwl_mvm *mvm parameter from the iwl_mvm_send_remote_wake_cfg function in D3.c. Signed-off-by: Oren Givon <oren.givon@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-13iwlwifi: pcie: don't read INTA register in ICT IRQ handlerJohannes Berg
There's no reason to read the INTA register in the ICT IRQ handler, this interrupt mechanism is designed to not have to read as many registers as the regular one. Not reading the INTA register gives a significant performance/CPU use improvement. Since we still want to get this info, fetch it only if the ISR debug level is enabled. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-13iwlwifi: make TX seqno validation more efficientJohannes Berg
Accessing the device in Tx path is not a good idea. Mirror the data in DRAM. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-06-12Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/iwlwifi/mvm/mac80211.c
2013-06-12Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-06-12brcmfmac: add debugfs statistics for firmware-signallingArend van Spriel
Added statistics for flow-control and packets dropped by the driver. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-05-30 09:56:46 +0000