summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2014-10-01net: phy: add BCM7425 and BCM7429 PHYsPetri Gynther
Signed-off-by: Petri Gynther <pgynther@google.com> Acked-by: Florian Fainelli <f.fainelli@gmai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net: bcmgenet: fix bcmgenet_put_tx_csum()Petri Gynther
bcmgenet_put_tx_csum() needs to return skb pointer back to the caller because it reallocates a new one in case of lack of skb headroom. Signed-off-by: Petri Gynther <pgynther@google.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01vxlan: Set inner protocol before transmitTom Herbert
Call skb_set_inner_protocol to set inner Ethernet protocol to ETH_P_TEB before transmit. This is needed for GSO with UDP tunnels. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net: fec: implement rx_copybreak to improve rx performanceNimrod Andy
- Copy short frames and keep the buffers mapped, re-allocate skb instead of memory copy for long frames. - Add support for setting/getting rx_copybreak using generic ethtool tunable Changes V3: * As Eric Dumazet's suggestion that removing the copybreak module parameter and only keep the ethtool API support for rx_copybreak. Changes V2: * Implements rx_copybreak * Rx_copybreak provides module parameter to change this value * Add tunable_ops support for rx_copybreak Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169: add support for Byte Queue LimitsFlorian Westphal
tested on RTL8168d/8111d model using 'super_netperf 40' with TCP/UDP_STREAM. Output of while true; do for n in inflight limit; do echo -n $n\ ; cat $n; done; sleep 1; done during netperf run, 100mbit peer: inflight 0 limit 3028 inflight 6056 limit 4542 [ trimmed output for brevity, no limit/inflight changes during test steady-state ] limit 4542 inflight 3028 limit 6122 inflight 0 limit 6122 [ changed cable to 1gbit peer, restart netperf ] inflight 37850 limit 36336 inflight 33308 limit 31794 inflight 33308 limit 31794 inflight 27252 limit 25738 [ again, no changes during test ] inflight 27252 limit 25738 inflight 0 limit 28766 [ change cable to 100mbit peer, restart netperf ] limit 28766 inflight 27370 limit 28766 inflight 4542 limit 5990 inflight 6056 limit 4542 [ .. ] inflight 6056 limit 4542 inflight 0 [end of test] Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware ↵Chun-Hao Lin
dash function is enabled These two functions are used to inform dash firmware that driver is been brought up or brought down. So call these two functions only when hardware dash function is enabled. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:modify the behavior of function "rtl8168_oob_notify"Chun-Hao Lin
In function "rtl8168_oob_notify", using function "rtl_eri_write" to access eri register 0xe8, instead of using MAC register "ERIDR" and "ERIAR" to access it. For using function "rtl_eri_write" in function "rtl8168_oob_notify", need to move down "rtl8168_oob_notify" related functions under the function "rtl_eri_write". Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:change the name of function "r8168dp_check_dash" to "r8168_check_dash"Chun-Hao Lin
DASH function not only RTL8168DP can support, but also RTL8168EP. So change the name of function "r8168dp_check_dash" to "r8168_check_dash". Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:change the name of function"rtl_w1w0_eri"Chun-Hao Lin
Change the name of function "rtl_w1w0_eri" to "rtl_w0w1_eri". In this function, the local variable "val" is "write zeros then write ones". Please see below code. (val & ~m) | p In this patch, change the function name from "xx_w1w0_xx" to "xx_w0w1_xx". The changed function name is more suitable for it's behavior. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:for function "rtl_w1w0_phy" change its name and behaviorChun-Hao Lin
Change function name from "rtl_w1w0_phy" to "rtl_w0w1_phy". And its behavior from "write ones then write zeros" to "write zeros then write ones". In Realtek internal driver, bitwise operations are almost "write zeros then write ones". For easy to port hardware parameters from Realtek internal driver to Linux kernal driver "r8169", we would like to change this function's behavior and its name. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:add more chips to support magic packet v2Chun-Hao Lin
For RTL8168F RTL8168FB RTL8168G RTL8168GU RTL8411 RTL8411B RTL8402 RTL8107E, the magic packet enable bit is changed to eri 0xde bit0. In this patch, change magic packet enable bit of these chips to eri 0xde bit0. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:add support more chips to get mac address from backup mac address registerChun-Hao Lin
RTL8168FB RTL8168G RTL8168GU RTL8411 RTL8411B RTL8106EUS RTL8402 can support get mac address from backup mac address register. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:add disable/enable RTL8411B pll functionChun-Hao Lin
RTL8411B can support disable/enable pll function. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:add disable/enable RTL8168G pll functionChun-Hao Lin
RTL8168G also can disable/enable pll function. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:change uppercase number to lowercase numberChun-Hao Lin
Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01sunvnet: fix potential NULL pointer dereferenceDavid L Stevens
One of the error cases for vnet_start_xmit()'s "out_dropped" label is port == NULL, so only mess with port->clean_timer when port is not NULL. Signed-off-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net: ll_temac: Remove unnecessary ether_setup after alloc_etherdevSubbaraya Sundeep Bhatta
Calling ether_setup is redundant since alloc_etherdev calls it. Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01fm10k: using vmalloc requires including linux/vmalloc.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30sunvnet: generate ICMP PTMUD messages for smaller port MTUsDavid L Stevens
This patch sends ICMP and ICMPv6 messages for Path MTU Discovery when a remote port MTU is smaller than the device MTU. This allows mixing newer VIO protocol devices that support MTU negotiation with older devices that do not on the same vswitch. It also allows Linux-Linux LDOMs to use 64K-1 data packets even though Solaris vswitch is limited to <16K MTU. Signed-off-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30sunvnet: allow admin to set sunvnet MTUDavid L Stevens
This patch allows an admin to set the MTU on a sunvnet device to arbitrary values between the minimum (68) and maximum (65535) IPv4 packet sizes. Signed-off-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30sunvnet: make transmit path zero-copy in the kernelDavid L Stevens
This patch removes pre-allocated transmit buffers and instead directly maps pending packets on demand. This saves O(n^2) maximum-sized transmit buffers, for n hosts on a vswitch, as well as a copy to those buffers. Single-stream TCP throughput linux-solaris dropped ~5% for 1500-byte MTU, but linux-linux at 1500-bytes increased ~20%. Signed-off-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30sunvnet: upgrade to VIO protocol version 1.6David L Stevens
This patch upgrades the sunvnet driver to support VIO protocol version 1.6. In particular, it adds per-port MTU negotiation, allowing MTUs other than ETH_FRAMELEN with ports using newer VIO protocol versions. Signed-off-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: pxa168_eth: allow to compile the pxa168_eth driver for testsAntoine Ténart
Add a dependency to COMPILE_TEST so that the driver can be compiled for test purposes. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: pxa168_eth: allow Berlin SoCs to use the pxa168_eth driverAntoine Ténart
Berlin SoCs have an Ethernet controller compatible with the pxa168. Allow these SoCs to use the pxa168_eth driver. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: pxa168_eth: rework the MAC address setupAntoine Ténart
This patch rework the way the MAC address is retrieved. The MAC address can now, in addition to being random, be set in the device tree or retrieved from the Ethernet controller MAC address registers. The probing function will try to get a MAC address in the following order: - From the device tree. - From the Ethernet controller MAC address registers. - Generate a random one. This patch also adds a function to read the MAC address from the Ethernet Controller registers. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: pxa168_eth: set the mac address on the Ethernet controllerAntoine Ténart
When changing the MAC address, in addition to updating the dev_addr in the net_device structure, this patch also update the MAC address registers (high and low) of the Ethernet controller with the new MAC. The address stored in these registers is used for IEEE 802.3x Ethernet flow control, which is already enabled. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: pxa168_eth: fix Ethernet flow control statusAntoine Ténart
IEEE 802.3x Ethernet flow control is disabled when bit (1 << 2) is set in the port status register. Fix the flow control detection in the link event handling function which was relying on the opposite assumption. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: pxa168_eth: add device tree supportAntoine Ténart
Add the device tree support to the pxa168_eth driver. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: pxa168_eth: clean upAntoine Ténart
Clean up a bit the pxa168_eth driver before adding the device tree support. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debugJack Morgenstein
ConnectX2 HCAs have max_mtu=4k and max_vl=8 vls. However, if you specify a 4K mtu, the max_vl supported for 4K is 4 vls. The driver at startup attempts to set a 4K mtu using the max_vl value obtained from QUERY_PORT. Since the max_vl value is 8 vls (which is supported up to 2K mtu size), the first attempt to set the mtl/vl port value will fail, generating the following error message in the log: mlx4_core 0000:06:00.0: command 0xc failed: fw status = 0x40 The driver then tries again, using mtu=4k, vls=4, and this succeeds. Since we do not want to have this error message always displayed at driver start when there are ConnectX2 HCAs on the host, we deprecate the error message for this specific command/input_modifier/opcode_modifier/fw-status to be debug. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net/mlx4_core: Protect QUERY_PORT wrapper from untrusted guestsJack Morgenstein
The function mlx4_QUERY_PORT_wrapper implements only the QUERY_PORT "general" case (opcode modifier = 0). Verify that the opcode modifier is zero, and also that the input modifier contains only the port number in bits 0..7 (all other bits should be zero). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net/mlx4_core: New init and exit flow for mlx4_coreMajd Dibbiny
In the new flow, we separate the pci initialization and teardown from the initialization and teardown of the other resources. __mlx4_init_one handles the pci resources initialization. It then calls mlx4_load_one to initialize the remainder of the resources. When removing a device, mlx4_remove_one is invoked. However, now mlx4_remove_one calls mlx4_unload_one to free all the resources except the pci resources. When mlx4_unload_one returns, mlx4_remove_one then frees the pci resources. The above separation will allow us to implement 'reset flow' in the future. It will also enable more EQs for VFs and is a pre-step to the modern API to enable/disable SRIOV. Also added nvfs; an integer array of size MLX4_MAX_PORTS + 1; to the mlx4_dev struct. This new field is used to avoid parsing the num_vfs module parameter each time the mlx4_restart_one is called. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net/mlx4_core: Don't disable SRIOV if there are active VFsJack Morgenstein
When unloading the host driver while there are VFs active on VMs, the PF driver disabled sriov anyway, causing kernel crashes. We now leave SRIOV enabled, to avoid that. When the driver is reloaded, __mlx4_init_one is invoked on the PF. It now checks to see if SRIOV is already enabled on the PF -- and if so does not enable sriov again. Signed-off-by: Tal Alon <talal@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: cpsw: Add am33xx MACID readoutMarkus Pargmann
This patch adds a function to get the MACIDs from the am33xx SoC control module registers which hold unique vendor MACIDs. This is only used if of_get_mac_address() fails to get a valid mac address. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Tested-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: cpsw: Replace pr_err by dev_errMarkus Pargmann
Use dev_err instead of pr_err. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: cpsw: header, Add missing includeMarkus Pargmann
"MII_BUS_ID_SIZE" is defined in linux/phy.h which is not included in the cpsw.h file. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30net: cpsw: Add missing return valueMarkus Pargmann
ret is set 0 at this point, so jumping to that error label would result in a return value of 0. Set ret to -ENOMEM to return a proper error value. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30bonding: make global bonding stats more reliableAndy Gospodarek
As the code stands today, bonding stats are based simply on the stats from the member interfaces. If a member was to be removed from a bond, the stats would instantly drop. This would be confusing to an admin would would suddonly see interface stats drop while traffic is still flowing. In addition to preventing the stats drops mentioned above, new members will now be added to the bond and only traffic received after the member was added to the bond will be counted as part of bonding stats. Bonding counters will also be updated when any slaves are dropped to make sure the reported stats are reliable. v2: Changes suggested by Nik to properly allocate/free stats memory. v3: Properly destroy workqueue and fix netlink configuration path. v4: Moved cached stats into bonding and slave structs as there does not seem to be a complexity/performance benefit to using alloc'd memory vs in-struct memory. Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29macvlan: add source modeMichael Braun
This patch adds a new mode of operation to macvlan, called "source". It allows one to set a list of allowed mac address, which is used to match against source mac address from received frames on underlying interface. This enables creating mac based VLAN associations, instead of standard port or tag based. The feature is useful to deploy 802.1x mac based behavior, where drivers of underlying interfaces doesn't allows that. Configuration is done through the netlink interface using e.g.: ip link add link eth0 name macvlan0 type macvlan mode source ip link add link eth0 name macvlan1 type macvlan mode source ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11 ip link set link dev macvlan0 type macvlan macaddr add 00:22:22:22:22:22 ip link set link dev macvlan0 type macvlan macaddr add 00:33:33:33:33:33 ip link set link dev macvlan1 type macvlan macaddr add 00:33:33:33:33:33 ip link set link dev macvlan1 type macvlan macaddr add 00:44:44:44:44:44 This allows clients with MAC addresses 00:11:11:11:11:11, 00:22:22:22:22:22 to be part of only VLAN associated with macvlan0 interface. Clients with MAC addresses 00:44:44:44:44:44 with only VLAN associated with macvlan1 interface. And client with MAC address 00:33:33:33:33:33 to be associated with both VLANs. Based on work of Stefan Gula <steweg@gmail.com> v8: last version of Stefan Gula for Kernel 3.2.1 v9: rework onto linux-next 2014-03-12 by Michael Braun add MACADDR_SET command, enable to configure mac for source mode while creating interface v10: - reduce indention level - rename source_list to source_entry - use aligned 64bit ether address - use hash_64 instead of addr[5] v11: - rebase for 3.14 / linux-next 20.04.2014 v12 - rebase for linux-next 2014-09-25 Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29ARCNET: enable eae arcnet card supportMichael Grzeschik
This patch adds support for the EAE arcnet cards which has two Interfaces. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29ARCNET: add support for multi interfaces on com20020Michael Grzeschik
The com20020-pci driver is currently designed to instance one netdev with one pci device. This patch adds support to instance many cards with one pci device, depending on the device data in the private data. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29ARCNET: add com20020 PCI IDs with metadataMichael Grzeschik
This patch adds metadata for the com20020 to prepare for devices with multiple io address areas with multi card interfaces. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29ARCNET: add com20020_set_hwddr to change addressMichael Grzeschik
This patch adds com20020_set_hwaddr to make it possible to change the hwaddr on runtime. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29ARCNET: return IRQ_NONE if the interface isn't runningMichael Grzeschik
The interrupt handler needs to return IRQ_NONE in case two devices are used with the shared interrupt handler. Otherwise it could steal interrupts from the other interface. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29net: qualcomm: new Ethernet over SPI driver for QCA7000Stefan Wahren
This patch adds the Ethernet over SPI driver for the Qualcomm QCA7000 HomePlug GreenPHY. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28cxgb4: Add support for adaptive rxHariprasad Shenai
Based on original work by Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28cxgb4/cxgb4vf: Add Devicde ID for two more adapterHariprasad Shenai
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28cxgb4vf: Remove superfluous "idx" parameter of CH_DEVICE() macro.Hariprasad Shenai
Remove redundant idx parameter of CH_DEVICE() macro, its always zero. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28cxgb4: Use BAR2 Going To Sleep (GTS) for T5 and later.Hariprasad Shenai
Use BAR2 GTS for T5. If we are on T4 use the old doorbell mechanism; otherwise ue the new BAR2 mechanism. Use BAR2 doorbells for refilling FL's. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28mlx4: exploit skb->xmit_more to conditionally send doorbellEric Dumazet
skb->xmit_more tells us if another skb is coming next. We need to send doorbell when : xmit_more is not set, or txqueue is stopped (preventing next skb to come immediately) Tested with a modified pktgen version, I got a 40% increase of throughput. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-04-21 17:55:19 +0000