summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts were easy to resolve using immediate context mostly, except the cls_u32.c one where I simply too the entire HEAD chunk. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: hns3: Resume promisc mode and vlan filter status after loopback testJian Shen
This patch resumes promisc mode and vlan filter status after loopback test. Fixes: 3b75c3df599d ("net: hns3: net: hns3: Add support for IFF_ALLMULTI flag") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: hns3: Resume promisc mode and vlan filter status after resetJian Shen
This patch resumes promisc mode and vlan filter status after reset. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: hns3: Enable promisc mode when mac vlan table is fullJian Shen
Currently, the driver does nothing when mac vlan table is full. In this case, the packet with new mac address will be dropped by hardware. This patch adds check for the result of sync mac address, and enable promisc mode when mac vlan table is full. Furtherly, disable vlan filter when enable promisc by user command. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12Merge tag 'mac80211-next-for-davem-2018-10-12' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Highlights: * merge net-next, so I can finish the hwsim workqueue removal * fix TXQ NULL pointer issue that was reported multiple times * minstrel cleanups from Felix * simplify lib80211 code by not using skcipher, note that this will conflict with the crypto tree (and this new code here should be used) * use new netlink policy validation in nl80211 * fix up SAE (part of WPA3) in client-mode * FTM responder support in the stack ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: fddi: skfp: Remove unused macros 'PNMI_GET_ID' and 'PNMI_SET_ID'YueHaibing
The two PNMI macros are never used Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12net: cdc_ncm: remove set but not used variable 'ctx'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/usb/cdc_ncm.c: In function 'cdc_ncm_status': drivers/net/usb/cdc_ncm.c:1603:22: warning: variable 'ctx' set but not used [-Wunused-but-set-variable] struct cdc_ncm_ctx *ctx; It not used any more after commit fa83dbeee558 ("net: cdc_ncm: remove redundant "disconnected" flag") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12Merge tag 'mmc-v4.19-rc7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Ulf writes: "MMC core: - Avoid fragile multiblock reads for the last sector in SPI mode WIFI/SDIO: - libertas: Fixup suspend sequence for the SDIO card" * tag 'mmc-v4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: libertas: call into generic suspend code before turning off power mmc: block: avoid multiblock reads for the last sector in SPI mode
2018-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netGreg Kroah-Hartman
David writes: "Networking 1) RXRPC receive path fixes from David Howells. 2) Re-export __skb_recv_udp(), from Jiri Kosina. 3) Fix refcounting in u32 classificer, from Al Viro. 4) Userspace netlink ABI fixes from Eugene Syromiatnikov. 5) Don't double iounmap on rmmod in ena driver, from Arthur Kiyanovski. 6) Fix devlink string attribute handling, we must pull a copy into a kernel buffer if the lifetime extends past the netlink request. From Moshe Shemesh. 7) Fix hangs in RDS, from Ka-Cheong Poon. 8) Fix recursive locking lockdep warnings in tipc, from Ying Xue. 9) Clear RX irq correctly in socionext, from Ilias Apalodimas. 10) bcm_sf2 fixes from Florian Fainelli." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) net: dsa: bcm_sf2: Call setup during switch resume net: dsa: bcm_sf2: Fix unbind ordering net: phy: sfp: remove sfp_mutex's definition r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chips net: socionext: clear rx irq correctly net/mlx4_core: Fix warnings during boot on driverinit param set failures tipc: eliminate possible recursive locking detected by LOCKDEP selftests: udpgso_bench.sh explicitly requires bash selftests: rtnetlink.sh explicitly requires bash. qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface tipc: queue socket protocol error messages into socket receive buffer tipc: set link tolerance correctly in broadcast link net: ipv4: don't let PMTU updates increase route MTU net: ipv4: update fnhe_pmtu when first hop's MTU changes net/ipv6: stop leaking percpu memory in fib6 info rds: RDS (tcp) hangs on sendto() to unresponding address net: make skb_partial_csum_set() more robust against overflows devlink: Add helper function for safely copy string param devlink: Fix param cmode driverinit for string type devlink: Fix param set handling for string type ...
2018-10-11net: dsa: bcm_sf2: Call setup during switch resumeFlorian Fainelli
There is no reason to open code what the switch setup function does, in fact, because we just issued a switch reset, we would make all the register get their default values, including for instance, having unused port be enabled again and wasting power and leading to an inappropriate switch core clock being selected. Fixes: 8cfa94984c9c ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: dsa: bcm_sf2: Fix unbind orderingFlorian Fainelli
The order in which we release resources is unfortunately leading to bus errors while dismantling the port. This is because we set priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now permissible to clock gate the switch. Later on, when dsa_slave_destroy() comes in from dsa_unregister_switch() and calls dsa_switch_ops::port_disable, we perform the same dismantling again, and this time we hit registers that are clock gated. Make sure that dsa_unregister_switch() is the first thing that happens, which takes care of releasing all user visible resources, then proceed with clock gating hardware. We still need to set priv->wol_ports_mask to 0 to make sure that an enabled port properly gets disabled in case it was previously used as part of Wake-on-LAN. Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11nfp: replace long license headers with SPDXJakub Kicinski
Replace the repeated license text with SDPX identifiers. While at it bump the Copyright dates for files we touched this year. Signed-off-by: Edwin Peer <edwin.peer@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Nic Viljoen <nick.viljoen@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: phy: sfp: remove sfp_mutex's definitionSebastian Andrzej Siewior
The sfp_mutex variable is defined but never used in this file. Not even in the commit that introduced that variable. Remove sfp_mutex, it has no purpose. Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chipsMaciej S. Szmigiero
It has been reported that since commit 05212ba8132b42 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices") at least RTL_GIGA_MAC_VER_38 NICs work erratically after a resume from suspend. The problem has been traced to a missing RX_MULTI_EN bit in the RxConfig register. We already set this bit for RTL_GIGA_MAC_VER_35 NICs of the same 8168F chip family so let's do it also for its other siblings: RTL_GIGA_MAC_VER_36 and RTL_GIGA_MAC_VER_38. Curiously, the NIC seems to work fine after a system boot without having this bit set as long as the system isn't suspended and resumed. Fixes: 05212ba8132b42 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices") Reported-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Chris Clayton <chris2553@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: cdc_ncm: use tasklet_init() for tasklet_struct initBen Dooks
The tasklet initialisation would be better done by tasklet_init() instead of assuming all the fields are in an ok state by default. This does not fix any actual know bug. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: socionext: clear rx irq correctlyIlias Apalodimas
commit 63ae7949e94a ("net: socionext: Use descriptor info instead of MMIO reads on Rx") removed constant mmio reads from the driver and started using a descriptor field to check if packet should be processed. This lead the napi rx handler being constantly called while no packets needed processing and ksoftirq getting 100% cpu usage. Issue one mmio read to clear the irq correcty after processing packets Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net/mlx4_core: Fix warnings during boot on driverinit param set failuresMoshe Shemesh
During boot, mlx4_core sets the driverinit configuration parameters and updates the devlink module on the initial values calling devlink_param_driverinit_value_set(). If devlink_param_driverinit_value_set() returns an error mlx4_core reports kernel module warning. This caused false alarm during boot in case kernel was compiled with CONFIG_NET_DEVLINK off. Fix by removing warning reported in case devlink_param_driverinit_value_set() fails. This actually makes the function mlx4_devlink_set_init_value() redundant to using directly devlink_param_driverinit_value_set() and so removed. It fixes the following kernel trace: mlx4_core 0000:00:06.0: devlink set parameter 0 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 1 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 4 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 5 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 3 value failed (err = -95) Fixes: bd1b51dc66df ("mlx4: Add mlx4 initial parameters table and register it") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11cxgb4: fix thermal configuration dependenciesArnd Bergmann
With CONFIG_THERMAL=m, we get a build error: drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c: In function 'cxgb4_thermal_get_trip_type': drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.c:48:11: error: 'struct adapter' has no member named 'ch_thermal' Once that is fixed by using IS_ENABLED() checks, we get a link error against the thermal subsystem when cxgb4 is built-in: drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.o: In function `cxgb4_thermal_init': cxgb4_thermal.c:(.text+0x180): undefined reference to `thermal_zone_device_register' drivers/net/ethernet/chelsio/cxgb4/cxgb4_thermal.o: In function `cxgb4_thermal_remove': cxgb4_thermal.c:(.text+0x1e0): undefined reference to `thermal_zone_device_unregister' Finally, since CONFIG_THERMAL can be =m, the Makefile fails to pick up the extra file into built-in.a, and we get another link failure against the cxgb4_thermal_init/cxgb4_thermal_remove files, so the Makefile has to be adapted as well to work for both CONFIG_THERMAL=y and =m. Fixes: b18719157762 ("cxgb4: Add thermal zone support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: fix indentations in ena_defs for better readabilityArthur Kiyanovski
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: update driver version to 2.0.1Arthur Kiyanovski
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: remove redundant parameter in ena_com_admin_init()Arthur Kiyanovski
Remove redundant spinlock acquire parameter from ena_com_admin_init() Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: change rx copybreak default to reduce kernel memory pressureArthur Kiyanovski
Improves socket memory utilization when receiving packets larger than 128 bytes (the previous rx copybreak) and smaller than 256 bytes. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: limit refill Rx threshold to 256 to avoid latency issuesArthur Kiyanovski
Currently Rx refill is done when the number of required descriptors is above 1/8 queue size. With a default of 1024 entries per queue the threshold is 128 descriptors. There is intention to increase the queue size to 8196 entries. In this case threshold of 1024 descriptors is too large and can hurt latency. Add another limitation to Rx threshold to be at most 256 descriptors. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: explicit casting and initialization, and clearer error handlingArthur Kiyanovski
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: use CSUM_CHECKED device indication to report skb's checksum statusArthur Kiyanovski
Set skb->ip_summed to the correct value as reported by the device. Add counter for the case where rx csum offload is enabled but device didn't check it. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: add functions for handling Low Latency Queues in ena_netdevArthur Kiyanovski
This patch includes all code changes necessary in ena_netdev to enable packet sending via the LLQ placemnt mode. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: add functions for handling Low Latency Queues in ena_comArthur Kiyanovski
This patch introduces APIs for detection, initialization, configuration and actual usage of low latency queues(LLQ). It extends transmit API with creation of LLQ descriptors in device memory (which include host buffers descriptors as well as packet header) Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: introduce Low Latency Queues data structures according to ENA specArthur Kiyanovski
Low Latency Queues(LLQ) allow usage of device's memory for descriptors and headers. Such queues decrease processing time since data is already located on the device when driver rings the doorbell. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: complete host info to match latest ENA specArthur Kiyanovski
Add new fields and definitions to host info and fill them according to the latest ENA spec version. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: ena: minor performance improvementArthur Kiyanovski
Reduce fastpath overhead by making ena_com_tx_comp_req_id_get() inline. Also move it to ena_eth_com.h file with its dependency function ena_com_cq_inc_head(). Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11Merge tag 'alloc-args-v4.19-rc8' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Kees writes: "Fix open-coded multiplication arguments to allocators - Fixes several new open-coded multiplications added in the 4.19 merge window." * tag 'alloc-args-v4.19-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Replace more open-coded allocation size multiplications
2018-10-11mlxsw: spectrum: Add NVE packet trapsIdo Schimmel
The DECAP_ECN0 trap will be used to trap packets where the overlay packet is marked with Non-ECT, but the underlay packet is marked with either ECT(0), ECT(1) or CE. When trapped, such packets will be counted as errors by the VxLAN driver and thus provide better visibility. The NVE_ENCAP_ARP trap will be used to trap ARP packets undergoing NVE encapsulation. This is needed in order to support E-VPN ARP suppression, where the Linux bridge does not flood ARP packets through tunnel ports in case it can answer the ARP request itself. Note that all the packets trapped via these traps are marked with 'offload_fwd_mark', so as to not be re-flooded by the Linux bridge through the ASIC ports. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: resources: Add NVE resourcesIdo Schimmel
Add the following resources to be used by the NVE code: * Number of IPv4 underlay destination IPs in a single TNUMT record * Number of IPv6 underlay destination IPs in a single TNUMT record Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add Monitoring Parsing State RegisterIdo Schimmel
This register is used for setting up the parsing for hash, policy-engine and routing. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add definition of unicast tunnel record for SFD registerIdo Schimmel
Will be used to program the device with FDB records pointing to a NVE tunnel. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add Tunneling NVE QoS Default RegisterIdo Schimmel
The TNQDR register configures the default QoS settings for NVE encapsulation. It will be used to set the default DSCP of each port to 0, so that when DSCP is set to inherit and the overlay packet does not have an IP header the outer DSCP will be set to 0, in accordance with the software data path. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add Tunneling NVE QoS Configuration RegisterIdo Schimmel
The register configures how QoS is set in Encapsulation into the underlay network. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add Tunneling NVE Decapsulation ECN Mapping RegisterIdo Schimmel
This register configures the actions that are done during NVE decapsulation based on the ECN bits. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add Tunneling NVE Encapsulation ECN Mapping RegisterIdo Schimmel
This register performs mapping from overlay ECN to underlay ECN during NVE encapsulation. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add Tunneling NVE Underlay Multicast Table RegisterIdo Schimmel
This register builds the linked list of underlay destination IPs used for BUM traffic on the overlay. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add Tunnel Port Configuration RegisterIdo Schimmel
This register enables / disables learning on different types of tunnel ports (e.g., NVE, VPLS). Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Add Tunneling NVE General Configuration RegisterIdo Schimmel
This register configures global NVE configuration such as source IP of the NVE tunnel and UDP source port calculation. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: spectrum: Seed LAG hash functionIdo Schimmel
Currently, the seed of the LAG hash function is always set to 0, which means it is identical across all switches. Instead, use a random number. This is especially important now that VxLAN is supported, as the LAG hash function is used to calculate the UDP source port of the encapsulated packet. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: reg: Extend FDB flush types for NVEIdo Schimmel
The device has the ability to flush all the FDB records that perform NVE encapsulation or only a subset of these with a specific filtering identifier (FID). Expose these types so that they could be used by subsequent patches where we need to flush the FDB records when an NVE device is unlinked from a bridge (FID). Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: spectrum: Add a new type of KVD linear recordIdo Schimmel
When the device needs to flood an overlay packet to remote VTEPs it retrieves a pointer to the head of a linked-list of records that store the IP addresses of these VTEPs. These records are stored in the KVD linear memory and configured via the Tunneling NVE Underlay Multicast Table (TNUMT) register. Add a new KVD linear entry type for these records, so that we will be able to allocate and free them. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: spectrum: Move L3 protocol and address definitions to global header fileIdo Schimmel
The L3 protocol and address definitions are going to be used by the NVE code, so move them to the global header file from the one private to the router. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: spectrum_switchdev: Do not assume notifier information typeIdo Schimmel
VxLAN notifications are going to use a different notifier information type, so cast to the correct type based on the received event. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: spectrum_switchdev: Check notification relevance based on upper deviceIdo Schimmel
VxLAN FDB updates are sent with the VxLAN device which is not our upper and will therefore be ignored by current code. Solve this by checking whether the upper device (bridge) is our upper. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: spectrum_switchdev: Prepare for VxLAN FDB notificationsIdo Schimmel
VxLAN FDB notifications need to be handled differently than bridge FDB notifications, so initialize the work item based on the received notification and rename the invoked function accordingly. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11mlxsw: spectrum: Remove misuses of private header fileIdo Schimmel
The spectrum_router.h header file is private to the router block and should only be included by direct consumers of it, such as dpipe and the multicast routing code. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-04-30 02:40:12 +0000