summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-01-07phy: Add an mdio_device structureAndrew Lunn
Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move allocation of interrupts into coreAndrew Lunn
Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: mdio-octeon: Use devm_mdiobus_alloc_size()Andrew Lunn
Rather than use devm_kzalloc(), use the mdio helper function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralise print about attached phyAndrew Lunn
Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: phy_{read|write}_mmd_indirect: get addr from phydevAndrew Lunn
The address of the device can be determined from the phydev structure, rather than passing it as a parameter. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07net: dnet: Use phy_find_first() helperAndrew Lunn
Replace the open coded search for the first phy with a call to the existing helper function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: add phydev_name() wrapperAndrew Lunn
Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add phydev_err() and phydev_dbg() macrosAndrew Lunn
In preparation for moving some of the phy_device structure members, add macros for printing errors and debug information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Use phy_read() instead of mdiobus_read()Andrew Lunn
Since we have a phydev, make use of it and the phy_read() function. This will help with later refactoring. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2016-01-06Driver: Vmxnet3: Fix regression caused by 5738a09Shrikrishna Khare
Reported-by: Bingkuo Liu <bingkuol@vmware.com> Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: qmi_wwan: Add WeTelecom-WPD600NKristian Evensen
The WeTelecom-WPD600N is an LTE module that, in addition to supporting most "normal" bands, also supports LTE over 450MHz. Manual testing showed that only interface number three replies to QMI messages. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06fsl/fman: double free on probe failureDan Carpenter
"priv" is allocated with devm_kzalloc() so freeing it here with kfree() will lead to a double free. Fixes: 3933961682a3 ('fsl/fman: Add FMan MAC driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06fsl/fman: fix the pause_time testDan Carpenter
pause_time is unsigned so it can't be less than zero. The bug means that we allow invalid pause-times. Fixes: 57ba4c9b56d8 ('fsl/fman: Add FMan MAC support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: core: remove an unnecessary conditionDan Carpenter
We checked "err" on the lines before so we know it's zero here. These cause a static checker warning because checking known things can indicate a bug. Maybe there is a missing assignment or we are checking the wrong variable. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mkiss: fix scribble on freed memoryAlan
commit d79f16c046086f4fe0d42184a458e187464eb83e fixed a user triggerable scribble on free memory but added a new one which allows the user to scribble even more and user controlled data into freed space. As with 6pack we need to halt the queue before we free the buffers, because the transmit logic is not protected by the semaphore. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06ethernet/atheros/alx: sanitize buffer sizing and paddingJarod Wilson
This is based on the work done by Przemek Rudy in bug 70761 at bugzilla.kernel.org, but with some work done to disentagle and clarify things a bit. Similar to Przemek's work and other drivers, we're adding a padding of 16 here, but we're also disentangling mtu size calculations from max buffer size calculations a bit, and adding ETH_HLEN to the value written into ALX_MTU. Hopefully, with a bit more consistency and clarity, things behave better here. Sadly, I can only test in my alx-driven E2200, which worked just fine before this patch. In comment #58 of bug 70761, Eugene A. Shatokhin reports that this patch does help considerably for a ROSA Linux user of his with an AR8162 network adapter when patched into a 4.1.x-based kernel, with several days of normal operation where wired network previously wasn't usable without setting MTU to 9000 as a work-around. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761 CC: "Eugene A. Shatokhin" <eugene.shatokhin@rosalab.ru> CC: Przemek Rudy <prudy1@o2.pl> CC: Jay Cliburn <jcliburn@gmail.com> CC: Chris Snook <chris.snook@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: Remember untagged VLANsElad Raz
When a vlan is been configured, remeber the untagged mode of the vlan. When displaying the list of configured VLANs, show the untagged attribute. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: Disable vlan_filtering for non .1D bridgeElad Raz
When a port is bridged, the bridge must be vlan aware bridge (.1Q) or the bridging should be on top of VLAN interfaces (.1D bridge). Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: Renaming local variable names for consistencyElad Raz
Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: Fixing vlans init rangeElad Raz
Initialize VLANs 0..4095 (Remove init for VID 4096). Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-066pack: fix free memory scribblesOne Thousand Gnomes
commit acf673a3187edf72068ee2f92f4dc47d66baed47 fixed a user triggerable free memory scribble but in doing so replaced it with a different one that allows the user to control the data and scribble even more. sixpack_close is called by the tty layer in tty context. The tty context is protected by sp_get() and sp_put(). However network layer activity via sp_xmit() is not protected this way. We must therefore stop the queue otherwise the user gets to dump a buffer mostly of their choice into freed kernel pages. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: pci: Adjust value of CPU egress traffic classIdo Schimmel
During initialization, when creating the send descriptor queues (SDQs), we specify the CPU egress traffic class of each SDQ. The maximum number of classes of this type is different in the two ASICs supported by this PCI driver. New firmware versions check this value is set correctly, which causes errors on the Spectrum ASIC, as its max exposed egress traffic class is lower than 7. Solve this by setting this field to 3, which is an acceptable value for both ASICs. Note that we currently do not expose the QoS capabilities of the ASICs, so setting this to an hardcoded value is OK for now. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06Merge tag 'wireless-drivers-next-for-davem-2016-01-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== brcfmac * fix IBSS which got broken over time * new USB id for bcm43242 dongle * arp offload configuration through inet notifier ath9k * add random number generator support (CONFIG_ATH9K_HWRNG) iwlwifi * Make scan parameters low latency aware * Fix in the NL80211_FEATURE_FULL_AP_CLIENT_STATE state case * Fix enable injection mode (Chaya Rachel) * Various cleanups (Dan / Julia / myself) * Allow to stay more time on popular channels (David Spinadel) * Bug fixes for D0i3 (Eliad / Luca) * Fixes for GO uAPSD (myself) * Start of TSO support (myself) * Rate control bug fixes (Eyal / Gregory) * Start the work on 9000 devices (Johannes / Sara / Oren) * Start the work on a new Tx queue allocation model (Liad) * Debug infrastructure enhancements (Golan) mwifiex * add a debugfs file for chip reset * advertise SMS4 cipher suite * increase ap and station interface limit to 3 * enable MSI support on newer pcie devices (8897 onwards) rtlwifi * fix lots of module parameter usage ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: hns: avoid uninitialized variable warning:Arnd Bergmann
gcc fails to see that the use of the 'last_offset' variable in hns_nic_reuse_page() is used correctly and issues a bogus warning: drivers/net/ethernet/hisilicon/hns/hns_enet.c: In function 'hns_nic_reuse_page': drivers/net/ethernet/hisilicon/hns/hns_enet.c:541:6: warning: 'last_offset' may be used uninitialized in this function [-Wmaybe-uninitialized] This simplifies the function to make it more obvious what is going on to both readers and compilers, which makes the warning go away. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05net/mlx5e: Add PTP Hardware Clock (PHC) supportEran Ben Elisha
Add a PHC support to the mlx5_en driver. Use reader/writer spinlocks to protect the timecounter since every packet received needs to call timecounter_cycle2time() when timestamping is enabled. This can become a performance bottleneck with RSS and multiple receive queues if normal spinlocks are used. The driver has been tested with both Documentation/ptp/testptp and the linuxptp project (http://linuxptp.sourceforge.net/) on a Mellanox ConnectX-4 card. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05net/mlx5e: Add HW timestamping (TS) supportEran Ben Elisha
Add support for enable/disable HW timestamping for incoming and/or outgoing packets. To enable/disable HW timestamping appropriate ioctl should be used. Currently HWTSTAMP_FILTER_ALL/NONE and HWTSAMP_TX_ON/OFF only are supported. Make all relevant changes in RX/TX flows to consider TS request and plant HW timestamps into relevant structures. Add internal clock for converting hardware timestamp to nanoseconds. In addition, add a service task to catch internal clock overflow, to make sure timestamping is accurate. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05net/mlx5_core: Introduce access function to read internal timerEran Ben Elisha
A preparation step which adds support for reading the hardware internal timer and the hardware timestamping from the CQE. In addition, advertize device_frequency_khz HCA capability. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05net/mlx5e: Do not modify the TX SKBAchiad Shochat
If the SKB is cloned, or has an elevated users count, someone else can be looking at it at the same time. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04net: Propagate lookup failure in l3mdev_get_saddr to callerDavid Ahern
Commands run in a vrf context are not failing as expected on a route lookup: root@kenny:~# ip ro ls table vrf-red unreachable default root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254 ping: Warning: source address might be selected on device other than vrf-red. PING 10.100.1.254 (10.100.1.254) from 0.0.0.0 vrf-red: 56(84) bytes of data. --- 10.100.1.254 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 999ms Since the vrf table does not have a route for 10.100.1.254 the ping should have failed. The saddr lookup causes a full VRF table lookup. Propogating a lookup failure to the user allows the command to fail as expected: root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254 connect: No route to host Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04mlxsw: spectrum: Change bridge port attributes only when bridgedIdo Schimmel
Bridge port attributes are offloaded to hardware when invoked with SELF flag set, but it really makes no sense to reflect them when port is not bridged. Allow a user to change these attribute only when port is bridged and initialize them correctly when joining or leaving a bridge. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04mlxsw: spectrum: Set bridge status in appropriate functionsIdo Schimmel
Set the bridge status of physical ports in the appropriate functions, to be consistent with LAG join/leave and vPorts joining/leaving bridge. Also, remove the error messages in these two functions, as we already emit errors in both the single functions they call. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04mlxsw: spectrum: Return NOTIFY_BAD on bridge failureIdo Schimmel
It is possible for us to fail when joining or leaving a bridge, so let the user know about that by returning NOTIFY_BAD, as already done for LAG join/leave and 802.1D bridges. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04mlxsw: spectrum: Initialize PVID only onceIdo Schimmel
We set PVID to 1 in mlxsw_sp_port_vlan_init(), so we can remove this statement. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04r8152: add reset_resume functionhayeswang
When the reset_resume() is called, the flag of SELECTIVE_SUSPEND should be cleared and reinitialize the device, whether the SELECTIVE_SUSPEND is set or not. If reset_resume() is called, it means the power supply is cut or the device is reset. That is, the device wouldn't be in runtime suspend state and the reinitialization is necessary. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04chelsio: constify cphy_ops structuresJulia Lawall
The cphy_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04fsl/fman: allow modular buildArnd Bergmann
ARM allmodconfig fails because of the addition of the FMAN driver: drivers/built-in.o: In function `dtsec_restart_autoneg': binder.c:(.text+0x173328): undefined reference to `mdiobus_read' binder.c:(.text+0x173348): undefined reference to `mdiobus_write' drivers/built-in.o: In function `dtsec_config': binder.c:(.text+0x173d24): undefined reference to `of_phy_find_device' drivers/built-in.o: In function `init_phy': binder.c:(.text+0x1763b0): undefined reference to `of_phy_connect' drivers/built-in.o: In function `stop': binder.c:(.text+0x176014): undefined reference to `phy_stop' drivers/built-in.o: In function `start': binder.c:(.text+0x176078): undefined reference to `phy_start' The reason is that the driver uses PHYLIB, but that is a loadable module here, and fman itself is built-in. This patch makes it possible to configure fman as a module as well so we don't change the status of PHYLIB in an allmodconfig kernel, and it adds a 'select PHYLIB' statement to ensure that phylib is always built-in when fman is. The driver uses "builtin_platform_driver(fman_driver);", which means it cannot be unloaded, but it's still possible to have it as a loadable module that gets loaded once and never removed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 5adae51a64b8 ("fsl/fman: Add FMan MURAM support") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04cxgb4: correctly handling failed allocationInsu Yun
Since t4_alloc_mem can be failed in memory pressure, if not properly handled, NULL dereference could be happened. Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04qlcnic: correctly handle qlcnic_alloc_mbx_argsInsu Yun
Since qlcnic_alloc_mbx_args can be failed, return value should be checked. Signed-off-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04r8169:Correct the way of setting RTL8168DP ephyChun-Hao Lin
The original way is wrong, it always writes ephy reg 0x03. Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04r8169:Fix typo in setting RTL8168H PHY PFM mode.Chun-Hao Lin
The PHY PFM register is in PHY page 0x0a44 register 0x11, not 0x14. Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04r8169:Fix typo in setting RTL8168EP and RTL8168H D3cold PFM modeChun-Hao Lin
The register for setting D3code PFM mode is MISC_1, not DLLPR. Signed-off-by: Chunhao Lin <hau@realtek.com> Reviewed-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04sh_eth: get rid of {cpu|edmac}_to_{edmac|cpu}()Sergei Shtylyov
Now that {cpu|edmac}_to_{edmac|cpu}() functions boiled down to the mere {cpu|le32}_to_{le32|cpu}() calls, there's no need for these functions anymore, so just get rid of them. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04sh_eth: remove EDMAC_BIG_ENDIANSergei Shtylyov
Commit 71557a37adb5 ("[netdrvr] sh_eth: Add SH7619 support") added support for the big-endian EDMAC descriptors. However, it was never used and never worked right until the recent driver fixes. I think we now can just remove this support, it was only burdening the driver from the start. It should be easy to do without disturbing the SH platform code, at least for now... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04tilepro: use to_delayed_workGeliang Tang
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04bnxt_en: Modify ethtool -l|-L to support combined or rx/tx rings.Michael Chan
The driver can support either all combined or all rx/tx rings. The default is combined, but the user can now select rx/tx rings. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04bnxt_en: Modify init sequence to support shared or non shared rings.Michael Chan
Modify ring memory allocation and MSIX setup to support shared or non shared rings and do the proper mapping. Default is still to use shared rings. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04bnxt_en: Modify bnxt_get_max_rings() to support shared or non shared rings.Michael Chan
Add logic to calculate how many shared or non shared rings can be supported. Default is to use shared rings. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04bnxt_en: Re-structure ring indexing and mapping.Michael Chan
In order to support dedicated or shared completion rings, the ring indexing and mapping are re-structured as below: 1. bp->grp_info[] array index is 1:1 with bp->bnapi[] array index and completion ring index. 2. rx rings 0 to n will be mapped to completion rings 0 to n. 3. If tx and rx rings share completion rings, then tx rings 0 to m will be mapped to completion rings 0 to m. 4. If tx and rx rings use dedicated completion rings, then tx rings 0 to m will be mapped to completion rings n + 1 to n + m. 5. Each tx or rx ring will use the corresponding completion ring index for doorbell mapping and MSIX mapping. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04bnxt_en: Check for NULL rx or tx ring.Michael Chan
Each bnxt_napi structure may no longer be having both an rx ring and a tx ring. Check for a valid ring before using it. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-04-11 10:02:25 +0000