summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2019-07-11net/mlx5e: IPoIB, Add error path in mlx5_rdma_setup_rnAya Levin
Check return value from mlx5e_attach_netdev, add error path on failure. Fixes: 48935bbb7ae8 ("net/mlx5e: IPoIB, Add netdevice profile skeleton") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-11net/mlx5e: Fix error flow in tx reporter diagnoseAya Levin
Fix tx reporter's diagnose callback. Propagate error when failing to gather diagnostics information or failing to print diagnostic data per queue. Fixes: de8650a82071 ("net/mlx5e: Add tx reporter support") Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-11net/mlx5e: Fix return value from timeout recover functionAya Levin
Fix timeout recover function to return a meaningful return value. When an interrupt was not sent by the FW, return IO error instead of 'true'. Fixes: c7981bea48fb ("net/mlx5e: Fix return status of TX reporter timeout recover") Signed-off-by: Aya Levin <ayal@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-11net/mlx5e: Rx, Fix checksum calculation for new hardwareSaeed Mahameed
CQE checksum full mode in new HW, provides a full checksum of rx frame. Covering bytes starting from eth protocol up to last byte in the received frame (frame_size - ETH_HLEN), as expected by the stack. Fixing up skb->csum by the driver is not required in such case. This fix is to avoid wrong checksum calculation in drivers which already support the new hardware with the new checksum mode. Fixes: 85327a9c4150 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-11net/mlx5e: Fix port tunnel GRE entropy controlEli Britstein
GRE entropy calculation is a single bit per card, and not per port. Force disable GRE entropy calculation upon the first GRE encap rule, and release the force at the last GRE encap rule removal. This is done per port. Fixes: 97417f6182f8 ("net/mlx5e: Fix GRE key by controlling port tunnel entropy calculation") Signed-off-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-11net/mlx5: E-Switch, Fix default encap modeMaor Gottlieb
Encap mode is related to switchdev mode only. Move the init of the encap mode to eswitch_offloads. Before this change, we reported that eswitch supports encap, even tough the device was in non SRIOV mode. Fixes: 7768d1971de67 ('net/mlx5: E-Switch, Add control for encapsulation') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-08net: stmmac: Re-work the queue selection for TSO packetsJose Abreu
Ben Hutchings says: "This is the wrong place to change the queue mapping. stmmac_xmit() is called with a specific TX queue locked, and accessing a different TX queue results in a data race for all of that queue's state. I think this commit should be reverted upstream and in all stable branches. Instead, the driver should implement the ndo_select_queue operation and override the queue mapping there." Fixes: c5acdbee22a1 ("net: stmmac: Send TSO packets always from Queue 0") Suggested-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07net: nixge: Fix misuse of strlcpyJoe Perches
Probable cut&paste typo - use the correct field size. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07net: ethernet: sun4i-emac: Fix misuse of strlcpyJoe Perches
Probable cut&paste typo - use the correct field size. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: add missing gtp_encap_disable_sock() in gtp_encap_enable()Taehee Yoo
If an invalid role is sent from user space, gtp_encap_enable() will fail. Then, it should call gtp_encap_disable_sock() but current code doesn't. It makes memory leak. Fixes: 91ed81f9abc7 ("gtp: support SGSN-side tunnels") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: fix use-after-free in gtp_newlink()Taehee Yoo
Current gtp_newlink() could be called after unregister_pernet_subsys(). gtp_newlink() uses gtp_net but it can be destroyed by unregister_pernet_subsys(). So unregister_pernet_subsys() should be called after rtnl_link_unregister(). Test commands: #SHELL 1 while : do for i in {1..5} do ./gtp-link add gtp$i & done killall gtp-link done #SHELL 2 while : do modprobe -rv gtp done Splat looks like: [ 753.176631] BUG: KASAN: use-after-free in gtp_newlink+0x9b4/0xa5c [gtp] [ 753.177722] Read of size 8 at addr ffff8880d48f2458 by task gtp-link/7126 [ 753.179082] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G W 5.2.0-rc6+ #50 [ 753.185801] Call Trace: [ 753.186264] dump_stack+0x7c/0xbb [ 753.186863] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.187583] print_address_description+0xc7/0x240 [ 753.188382] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.189097] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.189846] __kasan_report+0x12a/0x16f [ 753.190542] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.191298] kasan_report+0xe/0x20 [ 753.191893] gtp_newlink+0x9b4/0xa5c [gtp] [ 753.192580] ? __netlink_ns_capable+0xc3/0xf0 [ 753.193370] __rtnl_newlink+0xb9f/0x11b0 [ ... ] [ 753.241201] Allocated by task 7186: [ 753.241844] save_stack+0x19/0x80 [ 753.242399] __kasan_kmalloc.constprop.3+0xa0/0xd0 [ 753.243192] __kmalloc+0x13e/0x300 [ 753.243764] ops_init+0xd6/0x350 [ 753.244314] register_pernet_operations+0x249/0x6f0 [ ... ] [ 753.251770] Freed by task 7178: [ 753.252288] save_stack+0x19/0x80 [ 753.252833] __kasan_slab_free+0x111/0x150 [ 753.253962] kfree+0xc7/0x280 [ 753.254509] ops_free_list.part.11+0x1c4/0x2d0 [ 753.255241] unregister_pernet_operations+0x262/0x390 [ ... ] [ 753.285883] list_add corruption. next->prev should be prev (ffff8880d48f2458), but was ffff8880d497d878. (next. [ 753.287241] ------------[ cut here ]------------ [ 753.287794] kernel BUG at lib/list_debug.c:25! [ 753.288364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 753.289099] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G B W 5.2.0-rc6+ #50 [ 753.291036] RIP: 0010:__list_add_valid+0x74/0xd0 [ 753.291589] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 d9 48b [ 753.293779] RSP: 0018:ffff8880cae8f398 EFLAGS: 00010286 [ 753.294401] RAX: 0000000000000075 RBX: ffff8880d497d878 RCX: 0000000000000000 [ 753.296260] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed10195d1e69 [ 753.297070] RBP: ffff8880cd250ae0 R08: ffffed101b4bff21 R09: ffffed101b4bff21 [ 753.297899] R10: 0000000000000001 R11: ffffed101b4bff20 R12: ffff8880d497d878 [ 753.298703] R13: 0000000000000000 R14: ffff8880cd250ae0 R15: ffff8880d48f2458 [ 753.299564] FS: 00007f5f79805740(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000 [ 753.300533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 753.301231] CR2: 00007fe8c7ef4f10 CR3: 00000000b71a6006 CR4: 00000000000606f0 [ 753.302183] Call Trace: [ 753.302530] gtp_newlink+0x5f6/0xa5c [gtp] [ 753.303037] ? __netlink_ns_capable+0xc3/0xf0 [ 753.303576] __rtnl_newlink+0xb9f/0x11b0 [ 753.304092] ? rtnl_link_unregister+0x230/0x230 Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: fix Illegal context switch in RCU read-side critical section.Taehee Yoo
ipv4_pdp_add() is called in RCU read-side critical section. So GFP_KERNEL should not be used in the function. This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL. Test commands: gtp-link add gtp1 & gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2 Splat looks like: [ 130.618881] ============================= [ 130.626382] WARNING: suspicious RCU usage [ 130.626994] 5.2.0-rc6+ #50 Not tainted [ 130.627622] ----------------------------- [ 130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section! [ 130.629684] [ 130.629684] other info that might help us debug this: [ 130.629684] [ 130.631022] [ 130.631022] rcu_scheduler_active = 2, debug_locks = 1 [ 130.632136] 4 locks held by gtp-tunnel/1025: [ 130.632925] #0: 000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40 [ 130.634159] #1: 00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130 [ 130.635487] #2: 00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp] [ 130.636936] #3: 0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp] [ 130.638348] [ 130.638348] stack backtrace: [ 130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ #50 [ 130.641318] Call Trace: [ 130.641707] dump_stack+0x7c/0xbb [ 130.642252] ___might_sleep+0x2c0/0x3b0 [ 130.642862] kmem_cache_alloc_trace+0x1cd/0x2b0 [ 130.643591] gtp_genl_new_pdp+0x6c5/0x1150 [gtp] [ 130.644371] genl_family_rcv_msg+0x63a/0x1030 [ 130.645074] ? mutex_lock_io_nested+0x1090/0x1090 [ 130.645845] ? genl_unregister_family+0x630/0x630 [ 130.646592] ? debug_show_all_locks+0x2d0/0x2d0 [ 130.647293] ? check_flags.part.40+0x440/0x440 [ 130.648099] genl_rcv_msg+0xa3/0x130 [ ... ] Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: remove duplicate code in gtp_dellink()Taehee Yoo
gtp_encap_disable() in gtp_dellink() is unnecessary because it will be called by unregister_netdevice(). unregister_netdevice() internally calls gtp_dev_uninit() by ->ndo_uninit(). And gtp_dev_uninit() calls gtp_encap_disable(). Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: fix use-after-free in gtp_encap_destroy()Taehee Yoo
gtp_encap_destroy() is called twice. 1. When interface is deleted. 2. When udp socket is destroyed. either gtp->sk0 or gtp->sk1u could be freed by sock_put() in gtp_encap_destroy(). so, when gtp_encap_destroy() is called again, it would uses freed sk pointer. patch makes gtp_encap_destroy() to set either gtp->sk0 or gtp->sk1u to null. in addition, both gtp->sk0 and gtp->sk1u pointer are protected by rtnl_lock. so, rtnl_lock() is added. Test command: gtp-link add gtp1 & killall gtp-link ip link del gtp1 Splat looks like: [ 83.182767] BUG: KASAN: use-after-free in __lock_acquire+0x3a20/0x46a0 [ 83.184128] Read of size 8 at addr ffff8880cc7d5360 by task ip/1008 [ 83.185567] CPU: 1 PID: 1008 Comm: ip Not tainted 5.2.0-rc6+ #50 [ 83.188469] Call Trace: [ ... ] [ 83.200126] lock_acquire+0x141/0x380 [ 83.200575] ? lock_sock_nested+0x3a/0xf0 [ 83.201069] _raw_spin_lock_bh+0x38/0x70 [ 83.201551] ? lock_sock_nested+0x3a/0xf0 [ 83.202044] lock_sock_nested+0x3a/0xf0 [ 83.202520] gtp_encap_destroy+0x18/0xe0 [gtp] [ 83.203065] gtp_encap_disable.isra.14+0x13/0x50 [gtp] [ 83.203687] gtp_dellink+0x56/0x170 [gtp] [ 83.204190] rtnl_delete_link+0xb4/0x100 [ ... ] [ 83.236513] Allocated by task 976: [ 83.236925] save_stack+0x19/0x80 [ 83.237332] __kasan_kmalloc.constprop.3+0xa0/0xd0 [ 83.237894] kmem_cache_alloc+0xd8/0x280 [ 83.238360] sk_prot_alloc.isra.42+0x50/0x200 [ 83.238874] sk_alloc+0x32/0x940 [ 83.239264] inet_create+0x283/0xc20 [ 83.239684] __sock_create+0x2dd/0x540 [ 83.240136] __sys_socket+0xca/0x1a0 [ 83.240550] __x64_sys_socket+0x6f/0xb0 [ 83.240998] do_syscall_64+0x9c/0x450 [ 83.241466] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 83.242061] [ 83.242249] Freed by task 0: [ 83.242616] save_stack+0x19/0x80 [ 83.243013] __kasan_slab_free+0x111/0x150 [ 83.243498] kmem_cache_free+0x89/0x250 [ 83.244444] __sk_destruct+0x38f/0x5a0 [ 83.245366] rcu_core+0x7e9/0x1c20 [ 83.245766] __do_softirq+0x213/0x8fa Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07gtp: fix suspicious RCU usageTaehee Yoo
gtp_encap_enable_socket() and gtp_encap_destroy() are not protected by rcu_read_lock(). and it's not safe to write sk->sk_user_data. This patch make these functions to use lock_sock() instead of rcu_dereference_sk_user_data(). Test commands: gtp-link add gtp1 Splat looks like: [ 83.238315] ============================= [ 83.239127] WARNING: suspicious RCU usage [ 83.239702] 5.2.0-rc6+ #49 Not tainted [ 83.240268] ----------------------------- [ 83.241205] drivers/net/gtp.c:799 suspicious rcu_dereference_check() usage! [ 83.243828] [ 83.243828] other info that might help us debug this: [ 83.243828] [ 83.246325] [ 83.246325] rcu_scheduler_active = 2, debug_locks = 1 [ 83.247314] 1 lock held by gtp-link/1008: [ 83.248523] #0: 0000000017772c7f (rtnl_mutex){+.+.}, at: __rtnl_newlink+0x5f5/0x11b0 [ 83.251503] [ 83.251503] stack backtrace: [ 83.252173] CPU: 0 PID: 1008 Comm: gtp-link Not tainted 5.2.0-rc6+ #49 [ 83.253271] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 83.254562] Call Trace: [ 83.254995] dump_stack+0x7c/0xbb [ 83.255567] gtp_encap_enable_socket+0x2df/0x360 [gtp] [ 83.256415] ? gtp_find_dev+0x1a0/0x1a0 [gtp] [ 83.257161] ? memset+0x1f/0x40 [ 83.257843] gtp_newlink+0x90/0xa21 [gtp] [ 83.258497] ? __netlink_ns_capable+0xc3/0xf0 [ 83.259260] __rtnl_newlink+0xb9f/0x11b0 [ 83.260022] ? rtnl_link_unregister+0x230/0x230 [ ... ] Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05r8152: set RTL8152_UNPLUG only for real disconnectionHayes Wang
Set the flag of RTL8152_UNPLUG if and only if the device is unplugged. Some error codes sometimes don't mean the real disconnection of usb device. For those situations, set the flag of RTL8152_UNPLUG causes the driver skips some flows of disabling the device, and it let the device stay at incorrect state. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03bonding: validate ip header before check IPPROTO_IGMPCong Wang
bond_xmit_roundrobin() checks for IGMP packets but it parses the IP header even before checking skb->protocol. We should validate the IP header with pskb_may_pull() before using iph->protocol. Reported-and-tested-by: syzbot+e5be16aa39ad6e755391@syzkaller.appspotmail.com Fixes: a2fd940f4cff ("bonding: fix broken multicast with round-robin mode") Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03net: hns: add support for vlan TSOYonglong Liu
The hip07 chip support vlan TSO, this patch adds NETIF_F_TSO and NETIF_F_TSO6 flags to vlan_features to improve the performance after adding vlan to the net ports. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-03r8152: move calling r8153b_rx_agg_chg_indicate()Hayes Wang
r8153b_rx_agg_chg_indicate() needs to be called after enabling TX/RX and before calling rxdy_gated_en(tp, false). Otherwise, the change of the settings of RX aggregation wouldn't work. Besides, adjust rtl8152_set_coalesce() for the same reason. If rx_coalesce_usecs is changed, restart TX/RX to let the setting work. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02net: usb: asix: init MAC address buffersPhong Tran
This is for fixing bug KMSAN: uninit-value in ax88772_bind Tested by https://groups.google.com/d/msg/syzkaller-bugs/aFQurGotng4/eB_HlNhhCwAJ Reported-by: syzbot+8a3fc6674bbc3978ed4e@syzkaller.appspotmail.com syzbot found the following crash on: HEAD commit: f75e4cfe kmsan: use kmsan_handle_urb() in urb.c git tree: kmsan console output: https://syzkaller.appspot.com/x/log.txt?x=136d720ea00000 kernel config: https://syzkaller.appspot.com/x/.config?x=602468164ccdc30a dashboard link: https://syzkaller.appspot.com/bug?extid=8a3fc6674bbc3978ed4e compiler: clang version 9.0.0 (/home/glider/llvm/clang 06d00afa61eef8f7f501ebdb4e8612ea43ec2d78) syz repro: https://syzkaller.appspot.com/x/repro.syz?x=12788316a00000 C reproducer: https://syzkaller.appspot.com/x/repro.c?x=120359aaa00000 ================================================================== BUG: KMSAN: uninit-value in is_valid_ether_addr include/linux/etherdevice.h:200 [inline] BUG: KMSAN: uninit-value in asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline] BUG: KMSAN: uninit-value in ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724 CPU: 0 PID: 3348 Comm: kworker/0:2 Not tainted 5.1.0+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622 __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310 is_valid_ether_addr include/linux/etherdevice.h:200 [inline] asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline] ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724 usbnet_probe+0x10f5/0x3940 drivers/net/usb/usbnet.c:1728 usb_probe_interface+0xd66/0x1320 drivers/usb/core/driver.c:361 really_probe+0xdae/0x1d80 drivers/base/dd.c:513 driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671 __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778 bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454 __device_attach+0x454/0x730 drivers/base/dd.c:844 device_initial_probe+0x4a/0x60 drivers/base/dd.c:891 bus_probe_device+0x137/0x390 drivers/base/bus.c:514 device_add+0x288d/0x30e0 drivers/base/core.c:2106 usb_set_configuration+0x30dc/0x3750 drivers/usb/core/message.c:2027 generic_probe+0xe7/0x280 drivers/usb/core/generic.c:210 usb_probe_device+0x14c/0x200 drivers/usb/core/driver.c:266 really_probe+0xdae/0x1d80 drivers/base/dd.c:513 driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671 __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778 bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454 __device_attach+0x454/0x730 drivers/base/dd.c:844 device_initial_probe+0x4a/0x60 drivers/base/dd.c:891 bus_probe_device+0x137/0x390 drivers/base/bus.c:514 device_add+0x288d/0x30e0 drivers/base/core.c:2106 usb_new_device+0x23e5/0x2ff0 drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x48d1/0x7290 drivers/usb/core/hub.c:5432 process_one_work+0x1572/0x1f00 kernel/workqueue.c:2269 process_scheduled_works kernel/workqueue.c:2331 [inline] worker_thread+0x189c/0x2460 kernel/workqueue.c:2417 kthread+0x4b5/0x4f0 kernel/kthread.c:254 ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355 Signed-off-by: Phong Tran <tranmanphong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02macsec: fix checksumming after decryptionAndreas Steinmetz
Fix checksumming after decryption. Signed-off-by: Andreas Steinmetz <ast@domdv.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02macsec: fix use-after-free of skb during RXAndreas Steinmetz
Fix use-after-free of skb when rx_handler returns RX_HANDLER_PASS. Signed-off-by: Andreas Steinmetz <ast@domdv.de> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01r8152: fix the setting of detecting the linking change for runtime suspendHayes Wang
1. Rename r8153b_queue_wake() to r8153_queue_wake(). 2. Correct the setting. The enable bit should be 0xd38c bit 0. Besides, the 0xd38a bit 0 and 0xd398 bit 8 have to be cleared for both enabled and disabled. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01idr: introduce idr_for_each_entry_continue_ul()Cong Wang
Similarly, other callers of idr_get_next_ul() suffer the same overflow bug as they don't handle it properly either. Introduce idr_for_each_entry_continue_ul() to help these callers iterate from a given ID. cls_flower needs more care here because it still has overflow when does arg->cookie++, we have to fold its nested loops into one and remove the arg->cookie++. Fixes: 01683a146999 ("net: sched: refactor flower walk to iterate over idr") Fixes: 12d6066c3b29 ("net/mlx5: Add flow counters idr") Reported-by: Li Shuang <shuali@redhat.com> Cc: Davide Caratti <dcaratti@redhat.com> Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Chris Mi <chrism@mellanox.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Tested-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01vxlan: do not destroy fdb if register_netdevice() is failedTaehee Yoo
__vxlan_dev_create() destroys FDB using specific pointer which indicates a fdb when error occurs. But that pointer should not be used when register_netdevice() fails because register_netdevice() internally destroys fdb when error occurs. This patch makes vxlan_fdb_create() to do not link fdb entry to vxlan dev internally. Instead, a new function vxlan_fdb_insert() is added to link fdb to vxlan dev. vxlan_fdb_insert() is called after calling register_netdevice(). This routine can avoid situation that ->ndo_uninit() destroys fdb entry in error path of register_netdevice(). Hence, error path of __vxlan_dev_create() routine can have an opportunity to destroy default fdb entry by hand. Test command ip link add bonding_masters type vxlan id 0 group 239.1.1.1 \ dev enp0s9 dstport 4789 Splat looks like: [ 213.392816] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 213.401257] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 213.402178] CPU: 0 PID: 1414 Comm: ip Not tainted 5.2.0-rc5+ #256 [ 213.402178] RIP: 0010:vxlan_fdb_destroy+0x120/0x220 [vxlan] [ 213.402178] Code: df 48 8b 2b 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 06 01 00 00 4c 8b 63 08 48 b8 00 00 00 00 00 fc d [ 213.402178] RSP: 0018:ffff88810cb9f0a0 EFLAGS: 00010202 [ 213.402178] RAX: dffffc0000000000 RBX: ffff888101d4a8c8 RCX: 0000000000000000 [ 213.402178] RDX: 1bd5a00000000040 RSI: ffff888101d4a8c8 RDI: ffff888101d4a8d0 [ 213.402178] RBP: 0000000000000000 R08: fffffbfff22b72d9 R09: 0000000000000000 [ 213.402178] R10: 00000000ffffffef R11: 0000000000000000 R12: dead000000000200 [ 213.402178] R13: ffff88810cb9f1f8 R14: ffff88810efccda0 R15: ffff88810efccda0 [ 213.402178] FS: 00007f7f6621a0c0(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000 [ 213.402178] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 213.402178] CR2: 000055746f0807d0 CR3: 00000001123e0000 CR4: 00000000001006f0 [ 213.402178] Call Trace: [ 213.402178] __vxlan_dev_create+0x3a9/0x7d0 [vxlan] [ 213.402178] ? vxlan_changelink+0x740/0x740 [vxlan] [ 213.402178] ? rcu_read_unlock+0x60/0x60 [vxlan] [ 213.402178] ? __kasan_kmalloc.constprop.3+0xa0/0xd0 [ 213.402178] vxlan_newlink+0x8d/0xc0 [vxlan] [ 213.402178] ? __vxlan_dev_create+0x7d0/0x7d0 [vxlan] [ 213.554119] ? __netlink_ns_capable+0xc3/0xf0 [ 213.554119] __rtnl_newlink+0xb75/0x1180 [ 213.554119] ? rtnl_link_unregister+0x230/0x230 [ ... ] Fixes: 0241b836732f ("vxlan: fix default fdb entry netlink notify ordering during netdev create") Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-30bnxt_en: Suppress error messages when querying DSCP DCB capabilities.Michael Chan
Some firmware versions do not support this so use the silent variant to send the message to firmware to suppress the harmless error. This error message is unnecessarily alarming the user. Fixes: afdc8a84844a ("bnxt_en: Add DCBNL DSCP application protocol support.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-30bnxt_en: Cap the returned MSIX vectors to the RDMA driver.Michael Chan
In an earlier commit to improve NQ reservations on 57500 chips, we set the resv_irqs on the 57500 VFs to the fixed value assigned by the PF regardless of how many are actually used. The current code assumes that resv_irqs minus the ones used by the network driver must be the ones for the RDMA driver. This is no longer true and we may return more MSIX vectors than requested, causing inconsistency. Fix it by capping the value. Fixes: 01989c6b69d9 ("bnxt_en: Improve NQ reservations.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-30bnxt_en: Fix statistics context reservation logic for RDMA driver.Michael Chan
The current logic assumes that the RDMA driver uses one statistics context adjacent to the ones used by the network driver. This assumption is not true and the statistics context used by the RDMA driver is tied to its MSIX base vector. This wrong assumption can cause RDMA driver failure after changing ethtool rings on the network side. Fix the statistics reservation logic accordingly. Fixes: 780baad44f0f ("bnxt_en: Reserve 1 stat_ctx for RDMA driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-30bnxt_en: Fix ethtool selftest crash under error conditions.Michael Chan
After ethtool loopback packet tests, we re-open the nic for the next IRQ test. If the open fails, we must not proceed with the IRQ test or we will crash with NULL pointer dereference. Fix it by checking the bnxt_open_nic() return code before proceeding. Reported-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com> Fixes: 67fea463fd87 ("bnxt_en: Add interrupt test to ethtool -t selftest.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-30bnxt_en: Disable bus master during PCI shutdown and driver unload.Michael Chan
Some chips with older firmware can continue to perform DMA read from context memory even after the memory has been freed. In the PCI shutdown method, we need to call pci_disable_device() to shutdown DMA to prevent this DMA before we put the device into D3hot. DMA memory request in D3hot state will generate PCI fatal error. Similarly, in the driver remove method, the context memory should only be freed after DMA has been shutdown for correctness. Fixes: 98f04cf0f1fc ("bnxt_en: Check context memory requirements from firmware.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-29net: dsa: mv88e6xxx: wait after reset deactivationBaruch Siach
Add a 1ms delay after reset deactivation. Otherwise the chip returns bogus ID value. This is observed with 88E6390 (Peridot) chip. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-29bnx2x: Prevent ptp_task to be rescheduled indefinitelyGuilherme G. Piccoli
Currently bnx2x ptp worker tries to read a register with timestamp information in case of TX packet timestamping and in case it fails, the routine reschedules itself indefinitely. This was reported as a kworker always at 100% of CPU usage, which was narrowed down to be bnx2x ptp_task. By following the ioctl handler, we could narrow down the problem to an NTP tool (chrony) requesting HW timestamping from bnx2x NIC with RX filter zeroed; this isn't reproducible for example with ptp4l (from linuxptp) since this tool requests a supported RX filter. It seems NIC FW timestamp mechanism cannot work well with RX_FILTER_NONE - driver's PTP filter init routine skips a register write to the adapter if there's not a supported filter request. This patch addresses the problem of bnx2x ptp thread's everlasting reschedule by retrying the register read 10 times; between the read attempts the thread sleeps for an increasing amount of time starting in 1ms to give FW some time to perform the timestamping. If it still fails after all retries, we bail out in order to prevent an unbound resource consumption from bnx2x. The patch also adds an ethtool statistic for accounting the skipped TX timestamp packets and it reduces the priority of timestamping error messages to prevent log flooding. The code was tested using both linuxptp and chrony. Reported-and-tested-by: Przemyslaw Hausman <przemyslaw.hausman@canonical.com> Suggested-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-29net: macb: Fix SUBNS increment and increase resolutionHarini Katakam
The subns increment register has 24 bits as follows: RegBit[15:0] = Subns[23:8]; RegBit[31:24] = Subns[7:0] Fix the same in the driver and increase sub ns resolution to the best capable, 24 bits. This should be the case on all GEM versions that this PTP driver supports. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-29net: macb: Add separate definition for PPM fractionHarini Katakam
The scaled ppm parameter passed to _adjfine() contains a 16 bit fraction. This just happens to be the same as SUBNSINCR_SIZE now. Hence define this separately. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: mvpp2: prs: Don't override the sign bit in SRAM parser shiftMaxime Chevallier
The Header Parser allows identifying various fields in the packet headers, used for various kind of filtering and classification steps. This is a re-entrant process, where the offset in the packet header depends on the previous lookup results. This offset is represented in the SRAM results of the TCAM, as a shift to be operated. This shift can be negative in some cases, such as in IPv6 parsing. This commit prevents overriding the sign bit when setting the shift value, which could cause instabilities when parsing IPv6 flows. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Suggested-by: Alan Winkowski <walan@marvell.com> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: ethernet: ti: cpsw: Assign OF node to slave devicesMarek Vasut
Assign OF node to CPSW slave devices, otherwise it is not possible to bind e.g. DSA switch to them. Without this patch, the DSA code tries to find the ethernet device by OF match, but fails to do so because the slave device has NULL OF node. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28net: dsa: b53: Disable all ports on setupBenedikt Spranger
A b53 device may configured through an external EEPROM like the switch device on the Lamobo R1 router board. The configuration of a port may therefore differ from the reset configuration of the switch. The switch configuration reported by the DSA subsystem is different until the port is configured by DSA i.e. a port can be active, while the DSA subsystem reports the port is inactive. Disable all ports and not only the unused ones to put all ports into a well defined state. Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28Merge tag 'wireless-drivers-for-davem-2019-06-28' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.2 Hopefully the last set of fixes for 5.2. Nothing special this around, only small fixes and support for new cards. iwlwifi * add new cards for 22000 series and smaller fixes wl18xx * fix a clang warning about unused variables mwifiex * properly handle small vendor IEs (a regression from the recent security fix) ath * fix few SPDX tags mt76 * fix A-MSDU aggregation which got broken in v5.2-rc1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-27mt76: usb: fix rx A-MSDU supportLorenzo Bianconi
Commit f8f527b16db5 ("mt76: usb: use EP max packet aligned buffer sizes for rx") breaks A-MSDU support. When A-MSDU is enable the device can receive frames up to q->buf_size but they will be discarded in mt76u_process_rx_entry since there is no enough room for skb_shared_info. Fix the issue reallocating the skb and copying in the linear area the first 128B of the received frames and in the frag_list the remaining part Fixes: f8f527b16db5 ("mt76: usb: use EP max packet aligned buffer sizes for rx") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-26ipv6: constify rt6_nexthop()Nicolas Dichtel
There is no functional change in this patch, it only prepares the next one. rt6_nexthop() will be used by ip6_dst_lookup_neigh(), which uses const variables. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: dsa: microchip: Use gpiod_set_value_cansleep()Marek Vasut
Replace gpiod_set_value() with gpiod_set_value_cansleep(), as the switch reset GPIO can be connected to e.g. I2C GPIO expander and it is perfectly fine for the kernel to sleep for a bit in ksz_switch_register(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <Woojung.Huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26net: aquantia: fix vlans not working over bridged networkDmitry Bogdanov
In configuration of vlan over bridge over aquantia device it was found that vlan tagged traffic is dropped on chip. The reason is that bridge device enables promisc mode, but in atlantic chip vlan filters will still apply. So we have to corellate promisc settings with vlan configuration. The solution is to track in a separate state variable the need of vlan forced promisc. And also consider generic promisc configuration when doing vlan filter config. Fixes: 7975d2aff5af ("net: aquantia: add support of rx-vlan-filter offload") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26team: Always enable vlan tx offloadYueHaibing
We should rather have vlan_tci filled all the way down to the transmitting netdevice and let it do the hw/sw vlan implementation. Suggested-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26bonding: Always enable vlan tx offloadYueHaibing
We build vlan on top of bonding interface, which vlan offload is off, bond mode is 802.3ad (LACP) and xmit_hash_policy is BOND_XMIT_POLICY_ENCAP34. Because vlan tx offload is off, vlan tci is cleared and skb push the vlan header in validate_xmit_vlan() while sending from vlan devices. Then in bond_xmit_hash, __skb_flow_dissect() fails to get information from protocol headers encapsulated within vlan, because 'nhoff' is points to IP header, so bond hashing is based on layer 2 info, which fails to distribute packets across slaves. This patch always enable bonding's vlan tx offload, pass the vlan packets to the slave devices with vlan tci, let them to handle vlan implementation. Fixes: 278339a42a1b ("bonding: propogate vlan_features to bonding master") Suggested-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26ath: fix SPDX tagsKalle Valo
Commit ec8f24b7faaf ("treewide: Add SPDX license identifier - Makefile/Kconfig") marked various Makefiles and Kconfig files within ath directories as GPL-2.0. But these modules and drivers are actually ISC: * ath * ar5523 * ath10k * ath5k * ath6kl * ath9k * wcn36xx * wil6210 Fix SPDX tags accordingly. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-24qmi_wwan: Fix out-of-bounds readBjørn Mork
The syzbot reported Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x67/0x231 mm/kasan/report.c:188 __kasan_report.cold+0x1a/0x32 mm/kasan/report.c:317 kasan_report+0xe/0x20 mm/kasan/common.c:614 qmi_wwan_probe+0x342/0x360 drivers/net/usb/qmi_wwan.c:1417 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x660 drivers/base/dd.c:509 driver_probe_device+0x104/0x210 drivers/base/dd.c:670 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 Caused by too many confusing indirections and casts. id->driver_info is a pointer stored in a long. We want the pointer here, not the address of it. Thanks-to: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+b68605d7fadd21510de1@syzkaller.appspotmail.com Cc: Kristian Evensen <kristian.evensen@gmail.com> Fixes: e4bf63482c30 ("qmi_wwan: Add quirk for Quectel dynamic config") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24net: macb: do not copy the mac address if NULLAntoine Tenart
This patch fixes the MAC address setup in the probe. The MAC address retrieved using of_get_mac_address was checked for not containing an error, but it may also be NULL which wasn't tested. Fix it by replacing IS_ERR with IS_ERR_OR_NULL. Fixes: 541ddc66d665 ("net: macb: support of_get_mac_address new ERR_PTR error") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24iwlwifi: add support for hr1 RF IDOren Givon
The 22000 series FW that was meant to be used with hr is also the FW that is used for hr1 and has a different RF ID. Add support to load the hr FW when hr1 RF ID is detected. Cc: stable@vger.kernel.org # 5.1+ Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-24mwifiex: Don't abort on small, spec-compliant vendor IEsBrian Norris
Per the 802.11 specification, vendor IEs are (at minimum) only required to contain an OUI. A type field is also included in ieee80211.h (struct ieee80211_vendor_ie) but doesn't appear in the specification. The remaining fields (subtype, version) are a convention used in WMM headers. Thus, we should not reject vendor-specific IEs that have only the minimum length (3 bytes) -- we should skip over them (since we only want to match longer IEs, that match either WMM or WPA formats). We can reject elements that don't have the minimum-required 3 byte OUI. While we're at it, move the non-standard subtype and version fields into the WMM structs, to avoid this confusion in the future about generic "vendor header" attributes. Fixes: 685c9b7750bf ("mwifiex: Abort at too short BSS descriptor element") Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-24wl18xx: Fix Wunused-const-variableNathan Huckleberry
Clang produces the following warning drivers/net/wireless/ti/wl18xx/main.c:1850:43: warning: unused variable 'wl18xx_iface_ap_cl_limits' [-Wunused-const-variable] static const struct ieee80211_iface_limit wl18xx_iface_ap_cl_limits[] = { ^ drivers/net/wireless/ti/wl18xx/main.c:1869:43: warning: unused variable 'wl18xx_iface_ap_go_limits' [-Wunused-const-variable] static const struct ieee80211_iface_limit wl18xx_iface_ap_go_limits[] = { ^ The commit that added these variables never used them. Removing them. Cc: clang-built-linux@googlegroups.com Link: https://github.com/ClangBuiltLinux/linux/issues/530 Signed-off-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-04-06 14:44:15 +0000