summaryrefslogtreecommitdiff
path: root/drivers/nfc
AgeCommit message (Collapse)Author
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-01Merge tag 'nfc-next-4.13-1' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz says: ==================== NFC 4.13 pull request This is the NFC pull requesy for 4.13. We have: - A conversion to unified device and GPIO APIs for the fdp, pn544, and st{21,-nci} drivers. - A fix for NFC device IDs allocation. - A fix for the nfcmrvl driver firmware download mechanism. - A trf7970a DT and GPIO cleanup and clock setting fix. - A few fixes for potential overflows in the digital and LLCP code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-28NFC: trf7970a: Correct register settings for 27MHz clockGeoff Lansberry
In prior commits the selected clock frequency does not propagate correctly to what is written to the TRF7970A_MODULATOR_SYS_CLK_CTRL register. Signed-off-by: Geoff Lansberry <geoff@kuvee.com> Acked-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-23NFC: add NULL checks to avoid potential NULL pointer dereferenceGustavo A. R. Silva
NULL checks at line 457: if (!link0 || !link1) {, implies that both pointers link0 and link1 might be NULL. Function nfcsim_link_free() dereference pointers link0 and link1. Add NULL checks before calling nfcsim_link_free() to avoid a potential NULL pointer dereference. Addresses-Coverity-ID: 1364857 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-23Revert "NFC: trf7970a: Handle extra byte in response to Type 5 RMB commands"Mark Greer
This reverts commit ab714817d7e891608d31f6996b1e4c43cf2bf342. The original commit was designed to handle a bug in the trf7970a NFC controller where an extra byte was returned in Read Multiple Blocks (RMB) command responses. However, it has become less clear whether it is a bug in the trf7970a or in the tag. In addition, it was assumed that the extra byte was always returned but it turns out that is not always the case. The result is that a byte of good data is trimmed off when the extra byte is not present ultimately causing the neard deamon to fail the read. Since the trf7970a driver does not have the context to know when to trim the byte or not, remove the code from the trf7970a driver all together (and move it up to the neard daemon). This has the added benefit of simplifying the kernel driver and putting the extra complexity into userspace. CC: Rob Herring <robh@kernel.org> CC: devicetree@vger.kernel.org Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-22NFC: trf7970a: fix check of clock frequencies, use && instead of ||Colin Ian King
The "or" condition (clk_freq != TRF7970A_27MHZ_CLOCK_FREQUENCY) || (clk_freq != TRF7970A_13MHZ_CLOCK_FREQUE) will always be true because clk_freq cannot be equal to two different values at the same time. Use the && operator instead of || to fix this. Detected by CoverityScan, CID#1430468 ("Constant expression result") Fixes: 837eb4d21ecde7 ("NFC: trf7970a: add device tree option for 27MHz clock") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Geoff Lansberry <geoff@kuvee.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-22NFC: st-nci: Get rid of code duplication in ->probe()Andy Shevchenko
Since OF and ACPI case almost the same get rid of code duplication by moving gpiod_get() calls directly to ->probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-22NFC: st-nci: Add GPIO ACPI mapping tableAndy Shevchenko
In order to make GPIO ACPI library stricter prepare users of gpiod_get_index() to correctly behave when there no mapping is provided by firmware. Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-22NFC: st-nci: Use unified device properties API meaningfullyAndy Shevchenko
Use unified device properties API in meaningful way. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-22NFC: st-nci: Covert to use GPIO descriptorAndy Shevchenko
Since we got rid of platform data, the driver may use GPIO descriptor directly. Looking deeply to the use of the GPIO pin it looks like it should be a GPIO based reset control rather than custom GPIO handling. But this is out of scope of the change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-22NFC: st-nci: Get rid of "interesting" use of interrupt polarityAndy Shevchenko
I2C and SPI frameworks followed by IRQ framework do set interrupt polarity correctly if it's properly specified in firmware (ACPI or DT). Get rid of the redundant trick when requesting interrupt. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-22NFC: st-nci: Get rid of platform dataAndy Shevchenko
Legacy platform data must go away. We are on the safe side here since there are no users of it in the kernel. If anyone by any odd reason needs it the GPIO lookup tables and built-in device properties at your service. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-22NFC: fdp: Add GPIO ACPI mapping tableAndy Shevchenko
In order to make GPIO ACPI library stricter prepare users of gpiod_get_index() to correctly behave when there no mapping is provided by firmware. Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-22NFC: fdp: Convert to use devres APIAndy Shevchenko
It looks like there are two leftovers, at least one of which can leak the resource (IRQ). Convert both places to use managed variants of the functions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-22NFC: fdp: Convert I2C driver to ->probe_new()Andy Shevchenko
There is no platform code that uses i2c module table. Remove it altogether and adjust ->probe() to be ->probe_new(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-22NFC: st21nfca: Get rid of code duplication in ->probe()Andy Shevchenko
Since OF and ACPI case almost the same get rid of code duplication by moving gpiod_get() calls directly to ->probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-22NFC: st21nfca: Add GPIO ACPI mapping tableAndy Shevchenko
In order to make GPIO ACPI library stricter prepare users of gpiod_get_index() to correctly behave when there no mapping is provided by firmware. Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-22NFC: pn544: Switch to devm_acpi_dev_add_driver_gpios()Andy Shevchenko
Switch to use managed variant of acpi_dev_add_driver_gpios() to simplify error path and fix potentially wrong assignment if ->probe() fails. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-20net: manual clean code which call skb_put_[data:zero]yuan linyu
Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-18NFC: nfcmrvl: allow gpio 0 for reset signallingJohan Hovold
Allow gpio 0 to be used for reset signalling, and instead use negative errnos to disable the reset functionality. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-18NFC: nfcmrvl_usb: use interface as phy deviceJohan Hovold
Use the USB-interface rather than parent USB-device device, which is what this driver binds to, when registering the nci device. Note that using the right device is important when dealing with device- managed resources as the interface can be unbound independently of the parent device. Also note that private device pointer had already been set by nfcmrvl_nci_register_dev() so the redundant assignment can therefore be removed. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-18NFC: nfcmrvl_uart: fix device-node leak during probeJohan Hovold
Make sure to release the device-node reference when done parsing the node. Fixes: e097dc624f78 ("NFC: nfcmrvl: add UART driver") Cc: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-18NFC: nfcmrvl: fix firmware-management initialisationJohan Hovold
The nci-device was never deregistered in the event that fw-initialisation failed. Fix this by moving the firmware initialisation before device registration since the firmware work queue should be available before registering. Note that this depends on a recent fix that moved device-name initialisation back to to nci_allocate_device() as the firmware-workqueue name is now derived from the nfc-device name. Fixes: 3194c6870158 ("NFC: nfcmrvl: add firmware download support") Cc: stable <stable@vger.kernel.org> # 4.4 Cc: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-18NFC: nfcmrvl: use nfc-device for firmware downloadJohan Hovold
Use the nfc- rather than phy-device in firmware-management code that needs a valid struct device. This specifically fixes a NULL-pointer dereference in nfcmrvl_fw_dnld_init() during registration when the underlying tty is one end of a Unix98 pty. Note that the driver still uses the phy device for any debugging, which is fine for now. Fixes: 3194c6870158 ("NFC: nfcmrvl: add firmware download support") Cc: stable <stable@vger.kernel.org> # 4.4 Cc: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-18NFC: nfcmrvl: do not use device-managed resourcesJohan Hovold
This specifically fixes resource leaks in the registration error paths. Device-managed resources is a bad fit for this driver as devices can be registered from the n_nci line discipline. Firstly, a tty may not even have a corresponding device (should it be part of a Unix98 pty) something which would lead to a NULL-pointer dereference when registering resources. Secondly, if the tty has a class device, its lifetime exceeds that of the line discipline, which means that resources would leak every time the line discipline is closed (or if registration fails). Currently, the devres interface was only being used to request a reset gpio despite the fact that it was already explicitly freed in nfcmrvl_nci_unregister_dev() (along with the private data), something which also prevented the resource leak at close. Note that the driver treats gpio number 0 as invalid despite it being perfectly valid. This will be addressed in a follow-up patch. Fixes: b2fe288eac72 ("NFC: nfcmrvl: free reset gpio") Fixes: 4a2b947f56b3 ("NFC: nfcmrvl: add chip reset management") Cc: stable <stable@vger.kernel.org> # 4.2: b2fe288eac72 Cc: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-18NFC: nfcmrvl_uart: add missing tty-device sanity checkJohan Hovold
Make sure to check the tty-device pointer before trying to access the parent device to avoid dereferencing a NULL-pointer when the tty is one end of a Unix98 pty. Fixes: e097dc624f78 ("NFC: nfcmrvl: add UART driver") Cc: stable <stable@vger.kernel.org> # 4.2 Cc: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-18NFC: trf7970a: Clean up coding style issuesMark Greer
Clean up coding style issues according to scripts/Lindent. Some scripts/Lindent changes were reverted when it appeared to make the code less readable or when it made the line run over 80 characters. Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-18NFC: trf7970a: Convert to descriptor based GPIO interfaceMark Greer
The trf7970a driver uses the deprecated integer-based GPIO consumer interface so convert it to use the new descriptor-based GPIO consumer interface. Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-18NFC: trf7970a: Remove support for 'vin-voltage-override' DT propertyMark Greer
The 'vin-voltage-override' DT property is used by the trf7970a driver to override the voltage presented to the driver by the regulator subsystem. This is unnecessary as properly specifying the regulator chain via DT properties will accomplish the same thing. Therefore, remove support for 'vin-voltage-override'. Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-18NFC: trf7970a: Remove useless commentMark Greer
The last entry in the trf7970a_of_match[] table must be an empty entry to demarcate the end of the table. Currently, there is a comment indicating this but it is obvious so remove the comment. Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-18NFC: trf7970a: Only check 'en2-rf-quirk' if EN2 is specifiedMark Greer
The quirk indicated by the 'en2-rf-quirk' device tree property is only relevant when there is a GPIO connected to the EN2 pin of the trf7970a. This means we should only check for 'en2-rf-quirk' when EN2 is specified in the 'ti,enable-gpios' property of the device tree. Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-18NFC: trf7970a: Fix inaccurate comment in trf7970a_probe()Mark Greer
As of commit ce69b95ca4e4 ("NFC: Make EN2 pin optional in the TRF7970A driver"), only the GPIO for the 'EN' enable pin needs to be specified in the device tree so update the comments that says both 'EN' and 'EN2' must be specified. Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-18NFC: trf7970a: Don't de-assert EN2 unless it was assertedMark Greer
When the trf7970a part has the bug related to 'en2-rf-quirk', the GPIO connected to the EN2 pin will not be asserted by the driver when powering up so it shouldn't be de-asserted when powering down. Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-16networking: add and use skb_put_u8()Johannes Berg
Joe and Bjørn suggested that it'd be nicer to not have the cast in the fairly common case of doing *(u8 *)skb_put(skb, 1) = c; Add skb_put_u8() for this case, and use it across the code, using the following spatch: @@ expression SKB, C, S; typedef u8; identifier fn = {skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Note that due to the "S", the spatch isn't perfect, it should have checked that S is 1, but there's also places that use a sizeof expression like sizeof(var) or sizeof(u8) etc. Turns out that nobody ever did something like *(u8 *)skb_put(skb, 2) = c; which would be wrong anyway since the second byte wouldn't be initialized. Suggested-by: Joe Perches <joe@perches.com> Suggested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_pull & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_pull, __skb_pull, skb_pull_inline, __pskb_pull_tail, __pskb_pull, pskb_pull }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_pull, __skb_pull, skb_pull_inline, __pskb_pull_tail, __pskb_pull, pskb_pull }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: make skb_put & friends return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions (skb_put, __skb_put and pskb_put) return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_put, __skb_put }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_put, __skb_put }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) which actually doesn't cover pskb_put since there are only three users overall. A handful of stragglers were converted manually, notably a macro in drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many instances in net/bluetooth/hci_sock.c. In the former file, I also had to fix one whitespace problem spatch introduced. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13networking: use skb_put_zero()Johannes Berg
Use the recently introduced helper to replace the pattern of skb_put() && memset(), this transformation was done with the following spatch: @@ identifier p; expression len; expression skb; @@ -p = skb_put(skb, len); -memset(p, 0, len); +p = skb_put_zero(skb, len); Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17nfc: fix get_unaligned_...() misusesAl Viro
* if a local variable of type uint16_t is unaligned, your compiler is FUBAR * the whole point of get_unaligned_... is to avoid memcpy + ..._to_cpu(). Using it *after* memcpy() (into aligned object, no less) is pointless. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-17NFC: pn533: use constant off-stack buffer for sending acksMichał Mirosław
fix for WARN: usb 3-2.4.1: NFC: Exchanging data failed (error 0x13) llcp: nfc_llcp_recv: err -5 llcp: nfc_llcp_symm_timer: SYMM timeout ------------[ cut here ]------------ WARNING: CPU: 1 PID: 26397 at .../drivers/usb/core/hcd.c:1584 usb_hcd_map_urb_for_dma+0x370/0x550 transfer buffer not dma capable [...] Workqueue: events nfc_llcp_timeout_work [nfc] Call Trace: ? dump_stack+0x46/0x5a ? __warn+0xb9/0xe0 ? warn_slowpath_fmt+0x5a/0x80 ? usb_hcd_map_urb_for_dma+0x370/0x550 ? usb_hcd_submit_urb+0x2fb/0xa60 ? dequeue_entity+0x3f2/0xc30 ? pn533_usb_send_ack+0x5d/0x80 [pn533_usb] ? pn533_usb_abort_cmd+0x13/0x20 [pn533_usb] ? pn533_dep_link_down+0x32/0x70 [pn533] ? nfc_dep_link_down+0x87/0xd0 [nfc] [...] usb 3-2.4.1: NFC: Exchanging data failed (error 0x13) llcp: nfc_llcp_recv: err -5 llcp: nfc_llcp_symm_timer: SYMM timeout Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: trf7970a: Add device tree option of 1.8 Volt IO voltageGeoff Lansberry
The TRF7970A has configuration options for supporting hardware designs with 1.8 Volt or 3.3 Volt IO. This commit adds a device tree option, using a fixed regulator binding, for setting the io voltage to match the hardware configuration. If no option is supplied it defaults to 3.3 volt configuration. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Geoff Lansberry <geoff@kuvee.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: trf7970a: add device tree option for 27MHz clockGeoff Lansberry
The TRF7970A has configuration options to support hardware designs which use a 27.12MHz clock. This commit adds a device tree option 'clock-frequency' to support configuring the this chip for default 13.56MHz clock or the optional 27.12MHz clock. Acked-by: Rob Herring <robh@kernel.org> Acked-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Geoff Lansberry <geoff@kuvee.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: st21nfca: Use unified device property API meaningfullyAndy Shevchenko
Another place in the code that unveils non-tested at all ACPI case. Use unified device property API in meaningful way. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: st21nfca: Covert to use GPIO descriptorAndy Shevchenko
Since we got rid of platform data, the driver may use GPIO descriptor directly. Looking deeply to the use of the GPIO pin it looks like it should be a fixed voltage regulator rather than custom GPIO handling. But this is out of scope of the change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: st21nfca: Get rid of "interesting" use of interrupt polarityAndy Shevchenko
I2C framework followed by IRQ framework does set interrupt polarity correctly if it's properly specified in firmware (ACPI or DT). Get rid of the redundant trick when requesting interrupt. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: st21nfca: Get rid of platform dataAndy Shevchenko
Legacy platform data must go away. We are on the safe side here since there are no users of it in the kernel. If anyone by any odd reason needs it the GPIO lookup tables and built-in device properties at your service. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: st21nfca: Fix obvious typo when check error codeAndy Shevchenko
We return -ENODEV if ACPI provides a GPIO resource. Looks really wrong. If it has even been tested? Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: pn544: Get rid of code duplication in ->probe()Andy Shevchenko
Since OF and ACPI case almost the same get rid of code duplication by moving gpiod_get() calls directly to ->probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05NFC: pn544: Add GPIO ACPI mapping tableAndy Shevchenko
In order to make GPIO ACPI library stricter prepare users of gpiod_get_index() to correctly behave when there no mapping is provided by firmware. Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>