summaryrefslogtreecommitdiff
path: root/drivers/nvdimm/dimm_devs.c
AgeCommit message (Collapse)Author
2019-08-29libnvdimm/security: Consolidate 'security' operationsDan Williams
The security operations are exported from libnvdimm/security.c to libnvdimm/dimm_devs.c, and libnvdimm/security.c is optionally compiled based on the CONFIG_NVDIMM_KEYS config symbol. Rather than export the operations across compile objects, just move the __security_store() entry point to live with the helpers. Acked-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/156686730515.184120.10522747907309996674.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-08-29libnvdimm/security: Tighten scope of nvdimm->busy vs security operationsDan Williams
An attempt to freeze DIMMs currently runs afoul of default blocking of all security operations in the entry to the 'store' routine for the 'security' sysfs attribute. The blanket blocking of all security operations while the DIMM is in active use in a region is too restrictive. The only security operations that need to be aware of the ->busy state are those that mutate the state of data, i.e. erase and overwrite. Refactor the ->busy checks to be applied at the entry common entry point in __security_store() rather than each of the helper routines to enable freeze to be run regardless of busy state. Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Link: https://lore.kernel.org/r/156686729996.184120.3458026302402493937.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-08-29libnvdimm/security: Introduce a 'frozen' attributeDan Williams
In the process of debugging a system with an NVDIMM that was failing to unlock it was found that the kernel is reporting 'locked' while the DIMM security interface is 'frozen'. Unfortunately the security state is tracked internally as an enum which prevents it from communicating the difference between 'locked' and 'locked + frozen'. It follows that the enum also prevents the kernel from communicating 'unlocked + frozen' which would be useful for debugging why security operations like 'change passphrase' are disabled. Ditch the security state enum for a set of flags and introduce a new sysfs attribute explicitly for the 'frozen' state. The regression risk is low because the 'frozen' state was already blocked behind the 'locked' state, but will need to revisit if there were cases where applications need 'frozen' to show up in the primary 'security' attribute. The expectation is that communicating 'frozen' is mostly a helper for debug and status monitoring. Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reported-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Link: https://lore.kernel.org/r/156686729474.184120.5835135644278860826.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-18driver-core, libnvdimm: Let device subsystems add local lockdep coverageDan Williams
For good reason, the standard device_lock() is marked lockdep_set_novalidate_class() because there is simply no sane way to describe the myriad ways the device_lock() ordered with other locks. However, that leaves subsystems that know their own local device_lock() ordering rules to find lock ordering mistakes manually. Instead, introduce an optional / additional lockdep-enabled lock that a subsystem can acquire in all the same paths that the device_lock() is acquired. A conversion of the NFIT driver and NVDIMM subsystem to a lockdep-validate device_lock() scheme is included. The debug_nvdimm_lock() implementation implements the correct lock-class and stacking order for the libnvdimm device topology hierarchy. Yes, this is a hack, but hopefully it is a useful hack for other subsystems device_lock() debug sessions. Quoting Greg: "Yeah, it feels a bit hacky but it's really up to a subsystem to mess up using it as much as anything else, so user beware :) I don't object to it if it makes things easier for you to debug." Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/156341210661.292348.7014034644265455704.stgit@dwillia2-desk3.amr.corp.intel.com
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 64 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07Merge tag 'printk-for-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow state reset of printk_once() calls. - Prevent crashes when dereferencing invalid pointers in vsprintf(). Only the first byte is checked for simplicity. - Make vsprintf warnings consistent and inlined. - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf modifiers. - Some clean up of vsprintf and test_printf code. * tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: lib/vsprintf: Make function pointer_string static vsprintf: Limit the length of inlined error messages vsprintf: Avoid confusion between invalid address and value vsprintf: Prevent crash when dereferencing invalid pointers vsprintf: Consolidate handling of unknown pointer specifiers vsprintf: Factor out %pO handler as kobject_string() vsprintf: Factor out %pV handler as va_format() vsprintf: Factor out %p[iI] handler as ip_addr_string() vsprintf: Do not check address of well-known strings vsprintf: Consistent %pK handling for kptr_restrict == 0 vsprintf: Shuffle restricted_pointer() printk: Tie printk_once / printk_deferred_once into .data.once for reset treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively lib/test_printf: Switch to bitmap_zalloc()
2019-04-09treewide: Switch printk users from %pf and %pF to %ps and %pS, respectivelySakari Ailus
%pF and %pf are functionally equivalent to %pS and %ps conversion specifiers. The former are deprecated, therefore switch the current users to use the preferred variant. The changes have been produced by the following command: git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \ while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done And verifying the result. Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: xen-devel@lists.xenproject.org Cc: linux-acpi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvdimm@lists.01.org Cc: linux-pci@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-btrfs@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: linux-mm@kvack.org Cc: ceph-devel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: David Sterba <dsterba@suse.com> (for btrfs) Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c) Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci) Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-03-11Merge branch 'for-5.1/libnvdimm' into libnvdimm-for-nextDan Williams
Merge miscellaneous libnvdimm sub-system updates for v5.1. Highlights include: * Support for the Hyper-V family of device-specific-methods (DSMs) * Several fixes and workarounds for Hyper-V compatibility. * Fix for the support to cache the dirty-shutdown-count at init.
2019-02-02libnvdimm/dimm: Add a no-BLK quirk based on NVDIMM familyDan Williams
As Dexuan reports the NVDIMM_FAMILY_HYPERV platform is incompatible with the existing Linux namespace implementation because it uses NSLABEL_FLAG_LOCAL for x1-width PMEM interleave sets. Quirk it as an platform / DIMM that does not provide BLK-aperture access. Allow the libnvdimm core to assume no potential for aliasing. In case other implementations make the same mistake, provide a "noblk" module parameter to force-enable the quirk. Link: https://lkml.kernel.org/r/PU1P153MB0169977604493B82B662A01CBF920@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM Reported-by: Dexuan Cui <decui@microsoft.com> Tested-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-01-21libnvdimm/security: Require nvdimm_security_setup_events() to succeedDan Williams
The following warning: ACPI0012:00: security event setup failed: -19 ...is meant to capture exceptional failures of sysfs_get_dirent(), however it will also fail in the common case when security support is disabled. A few issues: 1/ A dev_warn() report for a common case is too chatty 2/ The setup of this notifier is generic, no need for it to be driven from the nfit driver, it can exist completely in the core. 3/ If it fails for any reason besides security support being disabled, that's fatal and should abort DIMM activation. Userspace may hang if it never gets overwrite notifications. 4/ The dirent needs to be released. Move the call to the core 'dimm' driver, make it conditional on security support being active, make it fatal for the exceptional case, add the missing sysfs_put() at device disable time. Fixes: 7d988097c546 ("...Add security DSM overwrite support") Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-12-21tools/testing/nvdimm: Add test support for Intel nvdimm security DSMsDave Jiang
Add nfit_test support for DSM functions "Get Security State", "Set Passphrase", "Disable Passphrase", "Unlock Unit", "Freeze Lock", and "Secure Erase" for the fake DIMMs. Also adding a sysfs knob in order to put the DIMMs in "locked" state. The order of testing DIMM unlocking would be. 1a. Disable DIMM X. 1b. Set Passphrase to DIMM X. 2. Write to /sys/devices/platform/nfit_test.0/nfit_test_dimm/test_dimmX/lock_dimm 3. Renable DIMM X 4. Check DIMM X state via sysfs "security" attribute for nmemX. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-12-21acpi/nfit, libnvdimm/security: add Intel DSM 1.8 master passphrase supportDave Jiang
With Intel DSM 1.8 [1] two new security DSMs are introduced. Enable/update master passphrase and master secure erase. The master passphrase allows a secure erase to be performed without the user passphrase that is set on the NVDIMM. The commands of master_update and master_erase are added to the sysfs knob in order to initiate the DSMs. They are similar in opeartion mechanism compare to update and erase. [1]: http://pmem.io/documents/NVDIMM_DSM_Interface-V1.8.pdf Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-12-21acpi/nfit, libnvdimm/security: Add security DSM overwrite supportDave Jiang
Add support for the NVDIMM_FAMILY_INTEL "ovewrite" capability as described by the Intel DSM spec v1.7. This will allow triggering of overwrite on Intel NVDIMMs. The overwrite operation can take tens of minutes. When the overwrite DSM is issued successfully, the NVDIMMs will be unaccessible. The kernel will do backoff polling to detect when the overwrite process is completed. According to the DSM spec v1.7, the 128G NVDIMMs can take up to 15mins to perform overwrite and larger DIMMs will take longer. Given that overwrite puts the DIMM in an indeterminate state until it completes introduce the NDD_SECURITY_OVERWRITE flag to prevent other operations from executing when overwrite is happening. The NDD_WORK_PENDING flag is added to denote that there is a device reference on the nvdimm device for an async workqueue thread context. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-12-21acpi/nfit, libnvdimm: Add support for issue secure erase DSM to Intel nvdimmDave Jiang
Add support to issue a secure erase DSM to the Intel nvdimm. The required passphrase is acquired from an encrypted key in the kernel user keyring. To trigger the action, "erase <keyid>" is written to the "security" sysfs attribute. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-12-21acpi/nfit, libnvdimm: Add enable/update passphrase support for Intel nvdimmsDave Jiang
Add support for enabling and updating passphrase on the Intel nvdimms. The passphrase is the an encrypted key in the kernel user keyring. We trigger the update via writing "update <old_keyid> <new_keyid>" to the sysfs attribute "security". If no <old_keyid> exists (for enabling security) then a 0 should be used. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-12-21acpi/nfit, libnvdimm: Add disable passphrase support to Intel nvdimm.Dave Jiang
Add support to disable passphrase (security) for the Intel nvdimm. The passphrase used for disabling is pulled from an encrypted-key in the kernel user keyring. The action is triggered by writing "disable <keyid>" to the sysfs attribute "security". Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-12-13acpi/nfit, libnvdimm: Add freeze security support to Intel nvdimmDave Jiang
Add support for freeze security on Intel nvdimm. This locks out any changes to security for the DIMM until a hard reset of the DIMM is performed. This is triggered by writing "freeze" to the generic nvdimm/nmemX "security" sysfs attribute. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-12-13acpi/nfit, libnvdimm: Introduce nvdimm_security_opsDave Jiang
Some NVDIMMs, like the ones defined by the NVDIMM_FAMILY_INTEL command set, expose a security capability to lock the DIMMs at poweroff and require a passphrase to unlock them. The security model is derived from ATA security. In anticipation of other DIMMs implementing a similar scheme, and to abstract the core security implementation away from the device-specific details, introduce nvdimm_security_ops. Initially only a status retrieval operation, ->state(), is defined, along with the base infrastructure and definitions for future operations. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Co-developed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-12-13acpi/nfit, libnvdimm: Store dimm id as a member to struct nvdimmDave Jiang
The generated dimm id is needed for the sysfs attribute as well as being used as the identifier/description for the security key. Since it's constant and should never change, store it as a member of struct nvdimm. As nvdimm_create() continues to grow parameters relative to NFIT driver requirements, do not require other implementations to keep pace. Introduce __nvdimm_create() to carry the new parameters and keep nvdimm_create() with the long standing default api. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-10-12nvdimm: Split label init out from the logic for getting config dataAlexander Duyck
This patch splits the initialization of the label data into two functions. One for doing the init, and another for reading the actual configuration data. The idea behind this is that by doing this we create a symmetry between the getting and setting of config data in that we have a function for both. In addition it will make it easier for us to identify the bits that are related to init versus the pieces that are a wrapper for reading data from the ACPI interface. So for example by splitting things out like this it becomes much more obvious that we were performing checks that weren't necessarily related to the set/get operations such as relying on ndd->data being present when the set and get ops should not care about a locally cached copy of the label area. Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-10-10libnvdimm, dimm: Maximize label transfer sizeDan Williams
Use kvzalloc() to bypass the arbitrary PAGE_SIZE limit of label transfer operations. Given the expense of calling into firmware, maximize the amount of label data we transfer per call to be up to the total label space if allowed by the firmware. Instead of limiting based on PAGE_SIZE we can instead simply limit the maximum size based on either the config_size int he case of the get operation, or the length of the write based on the set operation. On a system with 24 NVDIMM modules each with a config_size of 128K and a maximum transfer size of 64K - 4, this patch reduces the init time for the label data from around 24 seconds down to between 4-5 seconds. Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-07-25libnvdimm: Use max contiguous area for namespace sizeKeith Busch
This patch will find the max contiguous area to determine the largest pmem namespace size that can be created. If the requested size exceeds the largest available, ENOSPC error will be returned. This fixes the allocation underrun error and wrong error return code that have otherwise been observed as the following kernel warning: WARNING: CPU: <CPU> PID: <PID> at drivers/nvdimm/namespace_devs.c:913 size_store Fixes: a1f3e4d6a0c3 ("libnvdimm, region: update nd_region_available_dpa() for multi-pmem support") Cc: <stable@vger.kernel.org> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2018-04-16libnvdimm, dimm: handle EACCES failures from label readsDan Williams
The new support for the standard _LSR and _LSW methods neglected to also update the nvdimm_init_config_data() and nvdimm_set_config_data() to return the translated error code from failed commands. This precision is necessary because the locked status that was previously returned on ND_CMD_GET_CONFIG_SIZE commands is now returned on ND_CMD_{GET,SET}_CONFIG_DATA commands. If the kernel misses this indication it can inadvertently fall back to label-less mode when it should otherwise avoid all access to locked regions. Cc: <stable@vger.kernel.org> Fixes: 4b27db7e26cd ("acpi, nfit: add support for the _LSI, _LSR, and...") Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-06libnvdimm: remove redundant __func__ in dev_dbgDan Williams
Dynamic debug can be instructed to add the function name to the debug output using the +f switch, so there is no need for the libnvdimm modules to do it again. If a user decides to add the +f switch for libnvdimm's dynamic debug this results in double prints of the function name. Reported-by: Johannes Thumshirn <jthumshirn@suse.de> Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-10-07libnvdimm: introduce 'flags' attribute for DIMM 'lock' and 'alias' statusDan Williams
Given that we now how have two mechanisms for a DIMM to indicate that it is locked: * NVDIMM_FAMILY_INTEL 'get_config_size' _DSM command * ACPI 6.2 Label Storage Read / Write commands ...export the generic libnvdimm DIMM status in a new 'flags' attribute. This attribute can also reflect the 'alias' state which indicates whether the nvdimm core is enforcing labels for aliased-region-capacity that the given dimm is an interleave-set member. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-09-28libnvdimm, dimm: clear 'locked' status on successful DIMM enableDan Williams
If we successfully enable a DIMM then it must not be locked and we can clear the label-read failure condition. Otherwise, we need to reload the entire bus provider driver to achieve the same effect, and that can disrupt unrelated DIMMs and namespaces. Fixes: 9d62ed965118 ("libnvdimm: handle locked label storage areas") Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-27libnvdimm, nfit: enable support for volatile rangesDan Williams
Allow volatile nfit ranges to participate in all the same infrastructure provided for persistent memory regions. A resulting resulting namespace device will still be called "pmem", but the parent region type will be "nd_volatile". This is in preparation for disabling the dax ->flush() operation in the pmem driver when it is hosted on a volatile range. Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-27x86, libnvdimm, pmem: remove global pmem apiDan Williams
Now that all callers of the pmem api have been converted to dax helpers that call back to the pmem driver, we can remove include/linux/pmem.h and asm/pmem.h. Cc: <x86@kernel.org> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Oliver O'Halloran <oohall@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-05-08treewide: use kv[mz]alloc* rather than opencoded variantsMichal Hocko
There are many code paths opencoding kvmalloc. Let's use the helper instead. The main difference to kvmalloc is that those users are usually not considering all the aspects of the memory allocator. E.g. allocation requests <= 32kB (with 4kB pages) are basically never failing and invoke OOM killer to satisfy the allocation. This sounds too disruptive for something that has a reasonable fallback - the vmalloc. On the other hand those requests might fallback to vmalloc even when the memory allocator would succeed after several more reclaim/compaction attempts previously. There is no guarantee something like that happens though. This patch converts many of those places to kv[mz]alloc* helpers because they are more conservative. Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390 Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim Acked-by: David Sterba <dsterba@suse.com> # btrfs Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4 Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5 Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Santosh Raspatur <santosh@chelsio.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Yishai Hadas <yishaih@mellanox.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: "Yan, Zheng" <zyan@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-04libnvdimm: handle locked label storage areasDan Williams
Per the latest version of the "NVDIMM DSM Interface Example" [1], the label data retrieval routine can report a "locked" status. In this case all regions associated with that DIMM are disabled until the label area is unlocked. Provide generic libnvdimm enabling for NVDIMMs with label data area locking capabilities. [1]: http://pmem.io/documents/ Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-05-04libnvdimm: convert NDD_ flags to use bitops, introduce NDD_LOCKEDDan Williams
This is a preparation patch for handling locked nvdimm label regions, a new concept as introduced by the latest DSM document on pmem.io [1]. A future patch will leverage nvdimm_set_locked() at DIMM probe time to flag regions that can not be enabled. There should be no functional difference resulting from this change. [1]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example-V1.3.pdf Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-04-04libnvdimm: fix blk free space accountingDan Williams
Commit a1f3e4d6a0c3 "libnvdimm, region: update nd_region_available_dpa() for multi-pmem support" reworked blk dpa (DIMM Physical Address) accounting to comprehend multiple pmem namespace allocations aliasing with a given blk-dpa range. The following call trace is a result of failing to account for allocated blk capacity. WARNING: CPU: 1 PID: 2433 at tools/testing/nvdimm/../../../drivers/nvdimm/names 4 size_store+0x6f3/0x930 [libnvdimm] nd_region region5: allocation underrun: 0x0 of 0x1000000 bytes [..] Call Trace: dump_stack+0x86/0xc3 __warn+0xcb/0xf0 warn_slowpath_fmt+0x5f/0x80 size_store+0x6f3/0x930 [libnvdimm] dev_attr_store+0x18/0x30 If a given blk-dpa allocation does not alias with any pmem ranges then the full allocation should be accounted as busy space, not the size of the current pmem contribution to the region. The thinkos that led to this confusion was not realizing that the struct resource management is already guaranteeing no collisions between pmem allocations and blk allocations on the same dimm. Also, we do not try to support blk allocations in aliased pmem holes. This patch also fixes a case where the available blk goes negative. Cc: <stable@vger.kernel.org> Fixes: a1f3e4d6a0c3 ("libnvdimm, region: update nd_region_available_dpa() for multi-pmem support"). Reported-by: Dariusz Dokupil <dariusz.dokupil@intel.com> Reported-by: Dave Jiang <dave.jiang@intel.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Tested-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-19libnvdimm: allow a platform to force enable label supportDan Williams
Platforms like QEMU-KVM implement an NFIT table and label DSMs. However, since that environment does not define an aliased configuration, the labels are currently ignored and the kernel registers a single full-sized pmem-namespace per region. Now that the kernel supports sub-divisions of pmem regions the labels have a purpose. Arrange for the labels to be honored when we find an existing / valid namespace index block. Cc: <qemu-devel@nongnu.org> Cc: Haozhong Zhang <haozhong.zhang@intel.com> Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-07libnvdimm, namespace: enable allocation of multiple pmem namespacesDan Williams
Now that we have nd_region_available_dpa() able to handle the presence of multiple PMEM allocations in aliased PMEM regions, reuse that same infrastructure to track allocations from free space. In particular handle allocating from an aliased PMEM region in the case where there are dis-contiguous holes. The allocation for BLK and PMEM are documented in the space_valid() helper: BLK-space is valid as long as it does not precede a PMEM allocation in a given region. PMEM-space must be contiguous and adjacent to an existing existing allocation (if one exists). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-07libnvdimm, region: update nd_region_available_dpa() for multi-pmem supportDan Williams
The free dpa (dimm-physical-address) space calculation reports how much free space is available with consideration for aliased BLK + PMEM regions. Recall that BLK capacity is allocated from high addresses and PMEM is allocated from low addresses in their respective regions. nd_region_available_dpa() accounts for the fact that the largest encroachment (lowest starting address) into PMEM capacity by a BLK allocation limits the available capacity to that point, regardless if there is BLK allocation hole at a higher address. Similarly, for the multi-pmem case we need to track the largest encroachment (highest ending address) of a PMEM allocation in BLK capacity regardless of whether there is an allocation hole that a BLK allocation could fill at a lower address. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-09-01libnvdimm: Fix nvdimm_probe error on NVDIMM-NToshi Kani
'ndctl list --buses --dimms' does not list any NVDIMM-Ns since they are considered as idle. ndctl checks if any driver is attached to nmem device. nvdimm_probe() always fails in nvdimm_init_nsarea() since NVDIMM-Ns do not implement optinal ND_CMD_GET_CONFIG_DATA command. Change nvdimm_probe() to accept the case that the CONFIG_DATA command is not implemented for NVDIMM-Ns. The driver attaches without ndd, which keeps it no-op to the device. Reported-by: Brian Boylston <brian.boylston@hpe.com> Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Cc: Dan Williams <dan.j.williams@intel.com> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-08-29acpi, nfit: add dimm device notification supportDan Williams
Per "ACPI 6.1 Section 9.20.3" NVDIMM devices, children of the ACPI0012 NVDIMM Root device, can receive health event notifications. Given that these devices are precluded from registering a notification handler via acpi_driver.acpi_device_ops (due to no _HID), we use acpi_install_notify_handler() directly. The registered handler, acpi_nvdimm_notify(), triggers a poll(2) event on the nmemX/nfit/flags sysfs attribute when a health event notification is received. Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hpe.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Reviewed-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-07-11libnvdimm, nfit: move flush hint mapping to region-device driver-dataDan Williams
In preparation for triggering flushes of a DIMM's writes-posted-queue (WPQ) via the pmem driver move mapping of flush hint addresses to the region driver. Since this uses devm_nvdimm_memremap() the flush addresses will remain mapped while any region to which the dimm belongs is active. We need to communicate more information to the nvdimm core to facilitate this mapping, namely each dimm object now carries an array of flush hint address resources. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-05-21Merge branch 'for-4.7/dax' into libnvdimm-for-nextDan Williams
2016-05-20libnvdimm: release ida resourcesDan Williams
ida instances allocate some internal memory for ->free_bitmap in addition to the base 'struct ida'. Use ida_destroy() to release that memory at module_exit(). Reported-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-04-28nfit, libnvdimm: clarify "commands" vs "_DSMs"Dan Williams
Clarify the distinction between "commands", the ioctls userspace calls to request the kernel take some action on a given dimm device, and "_DSMs", the actual function numbers used in the firmware interface to the DIMM. _DSMs are ACPI specific whereas commands are Linux kernel generic. This is in preparation for breaking the 1:1 implicit relationship between the kernel ioctl number space and the firmware specific function numbers. Cc: Jerry Hoemann <jerry.hoemann@hpe.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-03-05libnvdimm, nfit: centralize command status translationDan Williams
The return value from an 'ndctl_fn' reports the command execution status, i.e. was the command properly formatted and was it successfully submitted to the bus provider. The new 'cmd_rc' parameter allows the bus provider to communicate command specific results, translated into common error codes. Convert the ARS commands to this scheme to: 1/ Consolidate status reporting 2/ Prepare for for expanding ars unit test cases 3/ Make the implementation more generic Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-27nvdimm: change to use generic kvfree()yalin wang
Signed-off-by: yalin wang <yalin.wang2010@gmail.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-26libnvdimm, nfit, nd_blk: driver for BLK-mode access persistent memoryRoss Zwisler
The libnvdimm implementation handles allocating dimm address space (DPA) between PMEM and BLK mode interfaces. After DPA has been allocated from a BLK-region to a BLK-namespace the nd_blk driver attaches to handle I/O as a struct bio based block device. Unlike PMEM, BLK is required to handle platform specific details like mmio register formats and memory controller interleave. For this reason the libnvdimm generic nd_blk driver calls back into the bus provider to carry out the I/O. This initial implementation handles the BLK interface defined by the ACPI 6 NFIT [1] and the NVDIMM DSM Interface Example [2] composed from DCR (dimm control region), BDW (block data window), IDT (interleave descriptor) NFIT structures and the hardware register format. [1]: http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf [2]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jens Axboe <axboe@fb.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-24libnvdimm: write blk label setDan Williams
After 'uuid', 'size', 'sector_size', and optionally 'alt_name' have been set to valid values the labels on the dimm can be updated. The difference with the pmem case is that blk namespaces are limited to one dimm and can cover discontiguous ranges in dpa space. Also, after allocating label slots, it is useful for userspace to know how many slots are left. Export this information in sysfs. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-24libnvdimm: write pmem label setDan Williams
After 'uuid', 'size', and optionally 'alt_name' have been set to valid values the labels on the dimms can be updated. Write procedure is: 1/ Allocate and write new labels in the "next" index 2/ Free the old labels in the working copy 3/ Write the bitmap and the label space on the dimm 4/ Write the index to make the update valid Label ranges directly mirror the dpa resource values for the given label_id of the namespace. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-24libnvdimm: blk labels and namespace instantiationDan Williams
A blk label set describes a namespace comprised of one or more discontiguous dpa ranges on a single dimm. They may alias with one or more pmem interleave sets that include the given dimm. This is the runtime/volatile configuration infrastructure for sysfs manipulation of 'alt_name', 'uuid', 'size', and 'sector_size'. A later patch will make these settings persistent by writing back the label(s). Unlike pmem namespaces, multiple blk namespaces can be created per region. Once a blk namespace has been created a new seed device (unconfigured child of a parent blk region) is instantiated. As long as a region has 'available_size' != 0 new child namespaces may be created. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-24libnvdimm: pmem label sets and namespace instantiation.Dan Williams
A complete label set is a PMEM-label per-dimm per-interleave-set where all the UUIDs match and the interleave set cookie matches the hosting interleave set. Present sysfs attributes for manipulation of a PMEM-namespace's 'alt_name', 'uuid', and 'size' attributes. A later patch will make these settings persistent by writing back the label. Note that PMEM allocations grow forwards from the start of an interleave set (lowest dimm-physical-address (DPA)). BLK-namespaces that alias with a PMEM interleave set will grow allocations backward from the highest DPA. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-24libnvdimm: namespace indices: read and validateDan Williams
This on media label format [1] consists of two index blocks followed by an array of labels. None of these structures are ever updated in place. A sequence number tracks the current active index and the next one to write, while labels are written to free slots. +------------+ | | | nsindex0 | | | +------------+ | | | nsindex1 | | | +------------+ | label0 | +------------+ | label1 | +------------+ | | ....nslot... | | +------------+ | labelN | +------------+ After reading valid labels, store the dpa ranges they claim into per-dimm resource trees. [1]: http://pmem.io/documents/NVDIMM_Namespace_Spec.pdf Cc: Neil Brown <neilb@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-24libnvdimm, nfit: add interleave-set state-tracking infrastructureDan Williams
On platforms that have firmware support for reading/writing per-dimm label space, a portion of the dimm may be accessible via an interleave set PMEM mapping in addition to the dimm's BLK (block-data-window aperture(s)) interface. A label, stored in a "configuration data region" on the dimm, disambiguates which dimm addresses are accessed through which exclusive interface. Add infrastructure that allows the kernel to block modifications to a label in the set while any member dimm is active. Note that this is meant only for enforcing "no modifications of active labels" via the coarse ioctl command. Adding/deleting namespaces from an active interleave set is always possible via sysfs. Another aspect of tracking interleave sets is tracking their integrity when DIMMs in a set are physically re-ordered. For this purpose we generate an "interleave-set cookie" that can be recorded in a label and validated against the current configuration. It is the bus provider implementation's responsibility to calculate the interleave set cookie and attach it to a given region. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>