| Age | Commit message (Collapse) | Author |
|---|
|
Commit 1f47ed294a2b ("block: cleanup and fix batch completion adding
conditions") modified the evaluation criteria for the third argument,
'ioerror', in the blk_mq_add_to_batch() function. Initially, the
function had checked if 'ioerror' equals zero. Following the commit, it
started checking for negative error values, with the presumption that
such values, for instance -EIO, would be passed in.
However, blk_mq_add_to_batch() callers do not pass negative error
values. Instead, they pass status codes defined in various ways:
- NVMe PCI and Apple drivers pass NVMe status code
- virtio_blk driver passes the virtblk request header status byte
- null_blk driver passes blk_status_t
These codes are either zero or positive, therefore the revised check
fails to function as intended. Specifically, with the NVMe PCI driver,
this modification led to the failure of the blktests test case nvme/039.
In this test scenario, errors are artificially injected to the NVMe
driver, resulting in positive NVMe status codes passed to
blk_mq_add_to_batch(), which unexpectedly processes the failed I/O in a
batch. Hence the failure.
To correct the ioerror check within blk_mq_add_to_batch(), make all
callers to uniformly pass the argument as boolean. Modify the callers to
check their specific status codes and pass the boolean value 'is_error'.
Also describe the arguments of blK_mq_add_to_batch as kerneldoc.
Fixes: 1f47ed294a2b ("block: cleanup and fix batch completion adding conditions")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20250311104359.1767728-3-shinichiro.kawasaki@wdc.com
[axboe: fold in documentation update]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
iBoot on at least some firmwares/machines leaves ANS2 running, requiring
a wake command instead of a CPU boot (and if we reset ANS2 in that
state, everything breaks).
Only stop the CPU if RTKit was running, and only do the reset dance if
the CPU is stopped.
Normal shutdown handoff:
- RTKit not yet running
- CPU detected not running
- Reset
- CPU powerup
- RTKit boot wait
ANS2 left running/idle:
- RTKit not yet running
- CPU detected running
- RTKit wake message
Sleep/resume cycle:
- RTKit shutdown
- CPU stopped
- (sleep here)
- CPU detected not running
- Reset
- CPU powerup
- RTKit boot wait
Shutdown or device removal:
- RTKit shutdown
- CPU stopped
Therefore, the CPU running bit serves as a consistent flag of whether
the coprocessor is fully stopped or just idle.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The only queues that really can't support a scheduler are those that
do not have a gendisk associated with them, and thus can't be used for
non-passthrough commands. In addition to those null_blk can optionally
set the flag, which is a bad odd. Replace the null_blk usage with
BLK_MQ_F_NO_SCHED_BY_DEFAULT to keep the expected semantics and then
remove BLK_MQ_F_NO_SCHED as the non-disk queues never call into
elevator_init_mq or blk_register_queue which adds the sysfs attributes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250106083531.799976-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
BLK_MQ_F_SHOULD_MERGE is set for all tag_sets except those that purely
process passthrough commands (bsg-lib, ufs tmf, various nvme admin
queues) and thus don't even check the flag. Remove it to simplify the
driver interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241219060214.1928848-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Replace the semi-open coded request list helpers with a proper rq_list
type that mirrors the bio_list and has head and tail pointers. Besides
better type safety this actually allows to insert at the tail of the
list, which will be useful soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
|
|
Combining both creates an ambiguous cleanup scenario for the caller if
an error is returned: does the device reference need to be dropped or
did the error occur before the device was initialized? If an error
occurs after the device is added, then the existing cleanup routines
will leak memory.
Furthermore, the nvme core is taking it upon itself to free the device's
kobj name under certain conditions rather than go through the core
device API. We shouldn't be peaking into these implementation details.
Split the device initialization from the addition to make it easier to
know the error handling actions, fix the existing memory leaks, and stop
the device layering violations.
Link: https://lore.kernel.org/linux-nvme/c4050a37-ecc9-462c-9772-65e25166f439@grimberg.me/
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Drivers must call nvme_uninit_ctrl after a successful nvme_init_ctrl.
Split the allocation side out to make the error handling boundary easier
to navigate. The apple driver had been doing this wrong, leaking the
controller device memory on a tagset failure.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/host/nvme-apple.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Pass a queue_limits to blk_mq_init_queue and apply it if non-NULL. This
will allow allocating queues with valid queue limits instead of setting
the values one at a time later.
Also rename the function to blk_mq_alloc_queue as that is a much better
name for a function that allocates a queue and always pass the queuedata
argument instead of having a separate version for the extra argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20240213073425.1621680-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ctrl->state value is updated in another thread using WRITE_ONCE, so
ensure all the readers use the appropriate accessor.
Reviewed-by: Sagi Grimberg <sagi@grmberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
There is no need for the else when direct return is used at the end of
the function.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
There is no need for the else when direct return is used at the end of
the function.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
NVMe controller register access hangs indefinitely when the co-processor
is not running. A missed reset is preferable over a hanging thread since
it could be recoverable.
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This is a functional revert of c76b8308e4c9 ("nvme-apple: fix controller
shutdown in apple_nvme_disable").
The commit broke suspend/resume since apple_nvme_reset_work() tries to
disable the controller on resume. This does not work for the apple NVMe
controller since register access only works while the co-processor
firmware is running.
Disabling the NVMe controller in the shutdown path is also required
for shutting the co-processor down. The original code was appropriate
for this hardware. Add a comment to prevent a similar breaking changes
in the future.
Fixes: c76b8308e4c9 ("nvme-apple: fix controller shutdown in apple_nvme_disable")
Reported-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/all/20230110174745.GA3576@jannau.net/
Signed-off-by: Janne Grunau <j@jannau.net>
[hch: updated with a more descriptive comment from Hector Martin]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
From the get-go, this driver and the ANS syslog have been complaining
about namespace identification. In 6.2-rc1, commit 811f4de0344d ("nvme:
avoid fallback to sequential scan due to transient issues") regressed
the driver by no longer allowing fallback to sequential namespace scans,
leaving us with no namespaces.
It turns out that the real problem is that this controller claiming
NVMe 1.1 compat is treating the CNS field as a binary field, as in NVMe
1.0. This already has a quirk, NVME_QUIRK_IDENTIFY_CNS, so set it for
the controller to fix all this nonsense (including other errors
triggered by other CNS commands).
Fixes: 811f4de0344d ("nvme: avoid fallback to sequential scan due to transient issues")
Fixes: 5bd2927aceba ("nvme-apple: Add initial Apple SoC NVMe driver")
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Many of the callers decide which one to use based on a bool argument and
there is at least some code to be shared, so merge these two. Also
move a comment specific to a single callsite to that callsite.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hector Martin <marcan@marcan.st>
|
|
nvme_shutdown_ctrl already shuts the controller down, there is no
need to also call nvme_disable_ctrl for the shutdown case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hector Martin <marcan@marcan.st>
|
|
In preparation for nvme-multipath IO stats accounting, we want the
accounting to happen in a centralized place. The request completion
is already centralized, but we need a common helper to request I/O
start.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
|
|
Naming the nvme helpers that wrap the block quiesce functionality
_start/_stop is rather confusing. Switch to using the quiesce naming
used by the block layer instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
Nothing about the TCG Opal support is PCIe transport specific, so move it
to the core code. For this nvme_init_ctrl_finish grows a new
was_suspended argument that allows the transport driver to tell the OPAL
code if the controller came out of a suspend cycle.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Tested-by Gerd Bayer <gbayer@linxu.ibm.com>
|
|
apple_nvme_reset_work schedules apple_nvme_remove, to be called, which
will call apple_nvme_disable and unquiesce the I/O queues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
nvme_kill_queues does two things:
1) mark the gendisk of all namespaces dead
2) unquiesce all I/O queues
These used to be be intertwined due to block layer issues, but aren't
any more. So move the unquiscing of the I/O queues into the callers,
and rename the rest of the function to the now more descriptive
nvme_mark_namespaces_dead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20221101150050.3510-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that blk_mq_destroy_queue does not release the queue reference, there
is no need for a second admin queue reference to be held by the
apple_nvme structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20221018135720.670094-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The fact that blk_mq_destroy_queue also drops a queue reference leads
to various places having to grab an extra reference. Move the call to
blk_put_queue into the callers to allow removing the extra references.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20221018135720.670094-2-hch@lst.de
[axboe: fix fabrics_q vs admin_q conflict in nvme core.c]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
NVMe uses PRPs for data transfers and has no specific limit for a single
DMA segement. Limiting the size will cause problems because the block
layer assumes PRP-ish devices using a virt boundary mask don't have a
segment limit. And while this is true, we also really need to tell the
DMA mapping layer about it, otherwise dma-debug will trip over it.
Fixes: 5bd2927aceba ("nvme-apple: Add initial Apple SoC NVMe driver")
Suggested-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[hch: rewrote the commit message based on the PCIe commit]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
|
|
Casting function pointers breaks control flow enforcement and is
generally a horrible coding style.
Add two wrappers to get rid of these casts.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use nvme core helper nvme_cancel_tagset and nvme_cancel_admin_tagset
instead of same logic code.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With new API blk_mq_is_reserved_rq() we can tell if a request is from
the reserved pool, so stop passing 'reserved' arg. There is actually
only a single user of that arg for all the callback implementations, which
can use blk_mq_is_reserved_rq() instead.
This will also allow us to stop passing the same 'reserved' around the
blk-mq iter functions next.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/1657109034-206040-4-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Set the queue dying flag and call blk_mq_exit_queue from del_gendisk for
all disks that do not have separately allocated queues, and thus remove
the need to call blk_cleanup_queue for them.
Rename blk_cleanup_disk to blk_mq_destroy_queue to make it clear that
this function is intended only for separately allocated blk-mq queues.
This saves an extra queue freeze for devices without a separately
allocated queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The new nvme-apple driver is missing a few conversions to and
from little-endian data:
drivers/nvme/host/apple.c:291:19: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned long long [usertype] prp1 @@ got restricted __le64 [usertype] prp1 @@
drivers/nvme/host/apple.c:291:19: sparse: expected unsigned long long [usertype] prp1
drivers/nvme/host/apple.c:291:19: sparse: got restricted __le64 [usertype] prp1
drivers/nvme/host/apple.c:292:19: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned long long [usertype] prp2 @@ got restricted __le64 [usertype] prp2 @@
drivers/nvme/host/apple.c:293:21: sparse: sparse: incorrect type in assignment (different base types) @@ expected unsigned int [usertype] length @@ got restricted __le16 [usertype] length @@
drivers/nvme/host/apple.c:351:52: sparse: sparse: incorrect type in initializer (different base types) @@ expected unsigned int [usertype] next_dma_addr @@ got restricted __le64 [usertype] @@
drivers/nvme/host/apple.c:456:45: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le64 [usertype] @@ got unsigned int [addressable] [usertype] prp_dma @@
drivers/nvme/host/apple.c:459:31: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le64 [usertype] @@ got unsigned long long [assigned] [usertype] dma_addr @@
drivers/nvme/host/apple.c:474:25: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le64 [usertype] prp1 @@ got unsigned int [usertype] dma_address @@
drivers/nvme/host/apple.c:475:25: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted __le64 [usertype] prp2 @@ got unsigned int [usertype] first_dma @@
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Apple SoCs such as the M1 come with an embedded NVMe controller that
is not attached to any PCIe bus. Additionally, it doesn't conform
to the NVMe specification and requires a bunch of changes to command
submission and IOMMU configuration to work.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
|
