| Age | Commit message (Collapse) | Author |
|---|
|
we are going to need the name for the core routine...
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
All transports use either a private cache of controller cap or an on-stack
copy, move it to the generic struct nvme_ctrl. In the future it will also
be maintained by the core.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
All all transports use the queue_count in exactly the same, so move it to
the generic struct nvme_ctrl. In the future it will also be maintained by
the core.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-By: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
PM1725 controllers have a couple of quirks that need to be handled in
the driver:
- I/O queue depth must be limited to 64 entries on controllers that do
not report MQES.
- The host interface registers go offline briefly while resetting the
chip. Thus a delay is needed before checking whether the controller
is ready.
Note that the admin queue depth is also limited to 64 on older versions
of this board. Since our NVME_AQ_DEPTH is now 32 that is no longer an
issue.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Remove dead build rule for drivers/nvme/host/scsi.c which has been
removed by commit ("nvme: Remove SCSI translations").
Signed-off-by: Valentin Rothberg <vrothberg@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unlike most drіvers that simply pass the maximum possible vectors to
pci_alloc_irq_vectors NVMe needs to configure the device before allocting
the vectors, so it needs a manual update for the new scheme of using
all present CPUs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <keith.busch@intel.com>
Cc: linux-block@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Link: http://lkml.kernel.org/r/20170626102058.10200-4-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
We can deadlock in case we got to a device removal
event on a queue which is already in the process of
destroying the cm_id is this is blocking until all
events on this cm_id will drain. On the other hand
we cannot guarantee that rdma_destroy_id was invoked
as we only have indication that the queue disconnect
flow has been queued (the queue state is updated before
the realease work has been queued).
So, we leave all the queue removal to a separate ib_client
to avoid this deadlock as ib_client device removal is in
a different context than the cm_id itself.
Reported-by: Shiraz Saleem <shiraz.saleem@intel.com>
Tested-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, the fc transport invokes nvme_fc_error_recovery() on every
io in which the transport detects an error. Which means:
a) it's really noisy on large io loads that all get hit by a link down.
b) we repeatively call nvme_stop_queues() even though queues are
stopped upon the first error or as first steps of reset_work.
Correct by:
Errors are only meaningful if the controller is in the LIVE state.
Thus, enact the reset_work only if LIVE. If called repeatively, state
will have already transitioned.
There's no need to stop the queues here. Let the first steps of
reset_work do the queue stopping.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
if a nvme command is issued with an opcode that is not supported by
the target (example: opcode 21 - detach namespace), the target
crashes due to a null pointer.
nvmet_req_init() detects the bad opcode and immediately calls the nvme
command done routine with an error status, allowing the transport to
send the response. However, the FC transport was aborting the command
on error, so the abort freed the lldd point, but the rsp transmit path
referenced it psot the free.
Fix by removing the abort call on nvmet_req_init() failure.
The completion response will be sent with an error status code.
As the completion path will terminate the io, ensure the data_sg
lists show an unused state so that teardown paths are successful.
Signed-off-by: Paul Ely <Paul.Ely@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If a controller connection is attempted (say to a subsystem that
does not exist), the first attempt errors out. If another connect
is attempted, it crashes.
Issue is the prior controller has yet execute it's final put, thus
its still on lists. However, opts points on it have been cleared, thus
causing the crash if they are referenced.
Fix is to add the missing put after the nvme_uninit_ctrl() call on
the attachment failure.
Signed-off-by: Paul Ely <Paul.Ely@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Per the recommendation by Sagi on:
http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html
Wait for io aborts to complete wait converted from msleep look to
using a struct completion.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Current fc transport code, on io termination, is calling
nvme_cleanup_cmd() followed by the transport dma unmap routine
which also calls nvme_cleanup_cmd(). Which means two kfrees occur
on the same address, raising havoc. This resulted in odd data errors,
effectively corruption..
Fix by removing the extraneous double calls. Call now occurs only in
teardown paths and as part of dma unmap routine.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
NVMe 1.2.1 or later requires controllers to provide a subsystem NQN in the
Identify controller data structures. Use this NQN for the subsysnqn
sysfs attribute by storing it in the nvme_ctrl structure after verifying
it. For older controllers we generate a "fake" NQN per non-normative
text in the NVMe 1.3 spec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While a NVMe Namespace is somewhat similar to a SCSI Logical Unit (and not
a Logical Unit Number anyway) there are subtile differences. Remove the
misleading comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grmberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A user reports APST is enabled, even when the NVMe is quirked or with
option "default_ps_max_latency_us=0".
The current logic will not set APST if the device is quirked. But the
NVMe in question will enable APST automatically.
Separate the logic "apst is supported" and "to enable apst", so we can
use the latter one to explicitly disable APST at initialiaztion.
BugLink: https://bugs.launchpad.net/bugs/1699004
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
No need to differentiate fabrics from pci/loop, also lower
it to 32 as we don't really need 256 inflight admin commands.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently we have no way to define a stable host-id but always use the one
which is randomly generated when we add the host or use the default host.
Provide a "hostid=%s" for user-space to pass in a persistent host-id which
overrides the randomly generated one.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The SCSI-to-NVMe translations were added to assist storage applications
utilizing SG_IO transitioning to NVMe. It was always recommended,
however, to use native NVMe for device management as too much is lost
in translation and the maintenance burden in keeping this kludgey
layer around has been neglected such that much of the translations are
completely broken.
This patch removes SG_IO handling from NVMe to avoid any confusion
regarding maintenance support for this interface. The config option for
NVMe SCSI emulation has been disabled by default since 4.5. The driver
has supported native nvme user commands since the beginning, and native
tooling is publicly available for use or as reference for anyone writing
their own tools, so there's no excuse for hanging onto a broken crutch.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Given that the code is simple enough it seems better
then passing a tag by reference for each call site, also
we can now get rid of __nvme_process_cq.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Also, maintain a consumed counter to rely on for doorbell and
cqe_seen update instead of directly relying on the cq head and phase.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Makes the code slightly more readable.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Nice abstraction of the actual mechanics of how to do it.
Note the change that we call it after we assign nvmeq->cq_head
to avoid passing it.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The controller state is set to resetting prior to disabling the
controller, so this patch accounts for that state when deciding if it
needs to freeze the queues. Without this, an 'nvme reset /dev/nvme0'
blocks forever because the queues were never frozen.
Fixes: 82b057caefaf ("nvme-pci: fix multiple ctrl removal scheduling")
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This adds support for Directives in NVMe, particular for the Streams
directive. Support for Directives is a new feature in NVMe 1.3. It
allows a user to pass in information about where to store the data, so
that it the device can do so most effiently. If an application is
managing and writing data with different life times, mixing differently
retentioned data onto the same locations on flash can cause write
amplification to grow. This, in turn, will reduce performance and life
time of the device.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If nvme_alloc_request fails, propagate the right error, instead of
assuming ENOMEM.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When nvme_kill_queues() is run, queues may be in
quiesced state, so we forcibly unquiesce queues to avoid
blocking dispatch, and I/O hang can be avoided in
remove path.
Peviously we use blk_mq_start_stopped_hw_queues() as
counterpart of blk_mq_quiesce_queue(), now we have
introduced blk_mq_unquiesce_queue(), so use it explicitly.
Cc: linux-nvme@lists.infradead.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_unquiesce_queue() is used for unquiescing the
queue explicitly, so replace blk_mq_start_stopped_hw_queues()
with it.
For the scsi part, this patch takes Bart's suggestion to
switch to block quiesce/unquiesce API completely.
Cc: linux-nvme@lists.infradead.org
Cc: linux-scsi@vger.kernel.org
Cc: dm-devel@redhat.com
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The NVMe 1.3 spec introduces Namespace Optimal IO Boundaries (NOIOB),
which standardizes the stripe mechanism we currently have quirks for.
This patch implements the necessary logic to handle this new feature.
Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We don't need to wait for the reset from the delayed work item that
is kicked off when we don't get a keepalive.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
|
This moves the nvme_reset function from the PCIe driver to common code,
renaming it to nvme_reset_ctrl in the process. Additionally a new
helper nvme_reset_ctrl_sync is added for the case where we want to
wait for the reset. To facilitate that the reset_work work structure is
move to the common nvme_ctrl structure and the ->reset_ctrl method is
removed. For now the drivers initialize the reset_work with their own
callback, but longer term we should move to callouts for specific
parts of the reset process and move even more code to the core.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Now that we get the tagset passed we can have a single implementation for
the I/O and admin queues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Now that we get the tagset passed we can have a single implementation for
the I/O and admin queues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Now that we get the tagset passed we can have a single implementation for
the I/O and admin queues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Now that we get the tagset passed we can have a single implementation for
the I/O and admin queues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
It only applies to read/write commands, and this way non-PCIe drivers
get the check as well instead of having to duplicate it when adding
metadata support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
And open code the SHUTDOWN_TIMEOUT macro.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We accidentally return ERR_PTR(0) which is NULL. The caller isn't
explicitly checking for that but I couldn't immediately spot whether
this would lead to a NULL dereference. Anyway, we can fix add an
error code easily enough.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
To let the host know what happends to the connection establishment,
adjust the behavior of nvmf_log_connect_error to make more connect
specifig error codes human-readble.
Signed-off-by: Guan Junxiong <guanjunxiong@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This was detected by building the nvmet-fc driver with W=1.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Change the few left over users of ctrl->dev over to using ctrl->device
for logging purposes, so we consistently use the same device.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Allow overriding the announced NVMe Version of a via configfs.
This is particularly helpful when debugging new features for the host
or target side without bumping the hard coded version (as the target
might not be fully compliant to the announced version yet).
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add the UUID field from the NVMe Namespace Identification Descriptor
to the nvmet_ns structure and allow it's population via configfs.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
A NVMe Identify NS command with a CNS value of '3' is expecting a list
of Namespace Identification Descriptor structures to be returned to
the host for the namespace requested in the namespace identify
command.
This Namespace Identification Descriptor structure consists of the
type of the namespace identifier, the length of the identifier and the
actual identifier.
Valid types are NGUID and UUID which we have saved in our nvme_ns
structure if they have been configured via configfs. If no value has
been assigened to one of these we return an "invalid opcode" back to
the host to maintain backward compatibiliy with older implementations
without Namespace Identify Descriptor list support.
Also as the Namespace Identify Descriptor list is the only mandatory
feature change between 1.2.1 and 1.3 we can bump the advertised
version as well.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Now that we have a way for getting the UUID from a target, provide it
to userspace as well.
Unfortunately there is already a sysfs attribute called UUID which is
a misnomer as it holds the NGUID value. So instead of creating yet
another wrong name, create a new 'nguid' sysfs attribute for the
NGUID. For the UUID attribute add a check wheter the namespace has a
UUID assigned to it and return this or return the NGUID to maintain
backwards compatibility. This should give userspace a chance to catch
up.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@rimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
If a target identifies itself as NVMe 1.3 compliant, try to get the
list of Namespace Identification Descriptors and populate the UUID,
NGUID and EUI64 fileds in the NVMe namespace structure with these
values.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The uuid field in the nvme_ns structure represents the nguid field
from the identify namespace command. And as NVMe 1.3 introduced an
UUID in the NVMe Namespace Identification Descriptor this will
collide.
So rename the uuid to nguid to prevent any further
confusion. Unfortunately we export the nguid to sysfs in the uuid
sysfs attribute, but this can't be changed anymore without possibly
breaking existing userspace.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Use NVME_IDENTIFY_DATA_SIZE define instead of hard coding the magic
4096 value.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.com>
[hch: converted three more users]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
