summaryrefslogtreecommitdiff
path: root/drivers/of/of_mdio.c
AgeCommit message (Collapse)Author
2015-05-14of: mdio: Add a "broken-turn-around" propertyFlorian Fainelli
Some Ethernet PHY devices/switches may not properly release the MDIO bus during turn-around time, and fail to drive it low, which can be seen by some controllers as a read failure, while the data clocked in is still correct. Add a boolean property "broken-turn-around" which is parsed by the generic MDIO bus probing code and will set the corresponding bit in the MDIO bus phy_ignore_ta_mask bitmask for MDIO bus drivers to utilize that information. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-11of: mdio: export of_mdio_parse_addrFlorian Fainelli
Export of_mdio_parse_addr() which allows parsing a given Ethernet PHY node MDIO address, verify it is within the allowed range, and return its value. This is going to be useful for the DSA code which needs to deal with multiple layers of MDIO buses. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07net: phy: adjust fixed_phy_register() return valuePetri Gynther
Adjust fixed_phy_register() to return struct phy_device *, so that it becomes easy to use fixed PHYs without device tree support: phydev = fixed_phy_register(PHY_POLL, &fixed_phy_status, NULL); fixed_phy_set_link_update(phydev, fixed_phy_link_update); phy_connect_direct(netdev, phydev, handler_fn, phy_interface); This change is a prerequisite for modifying bcmgenet driver to work without a device tree on Broadcom's MIPS-based 7xxx platforms. Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19of: mdio: honor flags passed to of_phy_connectFlorian Fainelli
Commit f9a8f83b04e0 ("net: phy: remove flags argument from phy_{attach, connect, connect_direct}") removed the flags argument to the PHY library calls to: phy_{attach,connect,connect_direct}. Most Device Tree aware drivers call of_phy_connect() with the flag argument set to 0, but some of them might want to set a different value there in order for the PHY driver to key a specific behavior based on the phy_device::phy_flags value. Allow such drivers to set custom phy_flags as part of the of_phy_connect() call since of_phy_connect() does start the PHY state machine, it will call into the PHY driver config_init() callback which is usually where a specific phy_flags value is important. Fixes: f9a8f83b04e0 ("net: phy: remove flags argument from phy_{attach, connect, connect_direct}") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-02net: fix circular dependency in of_mdio codeDaniel Mack
Commit 86f6cf4127 (net: of_mdio: add of_mdiobus_link_phydev()) introduced a circular dependency between libphy and of_mdio. depmod: ERROR: <modroot>/kernel/drivers/net/phy/libphy.ko in dependency cycle! depmod: ERROR: <modroot>/kernel/drivers/of/of_mdio.ko in dependency cycle! The problem is that of_mdio.c references &mdio_bus_type and libphy now references of_mdiobus_link_phydev. Fix this by not exporting of_mdiobus_link_phydev() from of_mdio.ko. Make it a static function in mdio_bus.c instead. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Jeff Mahoney <jeffm@suse.com> Fixes: 86f6cf4127 (net: of_mdio: add of_mdiobus_link_phydev()) Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-22of: mdio: fixup of_phy_register_fixed_link parsing of new bindingsRichard Retanubun
Fixes commit 3be2a49e5c08 ("of: provide a binding for fixed link PHYs") Fix the parsing of the new fixed link dts bindings for duplex, pause, and asym_pause by using the correct device node pointer. Signed-off-by: Richard Retanubun <rretanubun.work@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02of: of_mdio: export symbol of_mdiobus_link_phydevDaniel Mack
Make of_mdiobus_link_phydev externally available. This fixes CONFIG_OF_MDIO=m. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 86f6cf41272 ("net: of_mdio: add of_mdiobus_link_phydev()") Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02net: of_mdio: use int type for address variableDaniel Mack
Use int rather than u32 to fix the following warning: drivers/of/of_mdio.c:147 of_mdiobus_register() warn: unsigned 'addr' is never less than zero. Signed-off-by: Daniel Mack <zonque@gmail.com> Fixes: 8f8382888cba ("net: of_mdio: factor out code to parse a phy's 'reg' property") Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29net: of_mdio: don't store the length of a property if we don't need toDaniel Mack
of_get_property() can be called with NULL as 2nd argument if the caller is not interested in the length of a property. Use that here so we can get rid of a variable. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29net: of_mdio: add of_mdiobus_link_phydev()Daniel Mack
Add a function to walk the list of subnodes of a mdio bus and look for a node that matches the phy's address with its 'reg' property. If found, set the of_node pointer for the phy. This allows auto-probed pyh devices to be augmented by information passed in via DT. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29net: of_mdio: factor out code to parse a phy's 'reg' propertyDaniel Mack
Factor out some logic into of_mdio_parse_addr() so it can be reused later. While at it, use of_property_read_u32() rather than open-coding the same logic again. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-26of: mdio: fix compile warning in of_mdiobus_register_phy()Christian Engelmayer
Commit de906af1 (net: phy: make of_set_phy_supported work with genphy driver) removed the last user of variable 'max_speed' in function of_mdiobus_register_phy(), leading to compile warning "unused variable ‘max_speed’ [-Wunused-variable]". Thus remove it. Signed-off-by: Christian Engelmayer <cengelma@gmx.at> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22net: phy: make of_set_phy_supported work with genphy driverSascha Hauer
of_set_phy_supported allows overwiting hardware capabilities of a phy with values from the devicetree. of_set_phy_supported is called right after phy_device_register in the assumption that phy_probe is called from phy_device_register and the features of the phy are already initialized. For the genphy driver this is not true, here phy_probe is called later during phy_connect time. phy_probe will then overwrite all settings done from of_set_phy_supported Fix this by moving of_set_phy_supported to the core phy code and calling it from phy_probe. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22of: mdio: remove of_phy_connect_fixed_linkFlorian Fainelli
All in-tree drivers have been converted to use the new pair of functions: of_is_fixed_phy_link() plus of_phy_register_fixed_link(), we can now safely remove of_phy_connect_fixed_link. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16of: provide a binding for fixed link PHYsThomas Petazzoni
Some Ethernet MACs have a "fixed link", and are not connected to a normal MDIO-managed PHY device. For those situations, a Device Tree binding allows to describe a "fixed link" using a special PHY node. This patch adds: * A documentation for the fixed PHY Device Tree binding. * An of_phy_is_fixed_link() function that an Ethernet driver can call on its PHY phandle to find out whether it's a fixed link PHY or not. It should typically be used to know if of_phy_register_fixed_link() should be called. * An of_phy_register_fixed_link() function that instantiates the fixed PHY into the PHY subsystem, so that when the driver calls of_phy_connect(), the PHY device associated to the OF node will be found. These two additional functions also support the old fixed-link Device Tree binding used on PowerPC platforms, so that ultimately, the network device drivers for those platforms could be converted to use of_phy_is_fixed_link() and of_phy_register_fixed_link() instead of of_phy_connect_fixed_link(), while keeping compatibility with their respective Device Tree bindings. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-20of_mdio: Allow the DT to specify the phy ID and avoid autoprobingJason Gunthorpe
This makes the generic of_mdiobus_register parse the DT compatible string for the pattern ethernet-phy-idAAAA.BBBB. If present it should be a value that matches the phy-id register normally readable through MDIO. When the ID is given the phy autoprobing is defeated and the phy is created directly. This is necessary to support phy's that cannot be autoprobed when of_mdiobus_register is called. Specifically, my case has the phy in reset at of_mdiobus_register, the reset is only released once the ethernet driver starts, before it attaches to the phy. Tested on ARM Kirkwood with phy id 0x01410e90 (Marvell 88E1318) Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18of_mdio: fix phy interrupt passingBen Dooks
The of_mdiobus_register_phy() is not setting phy->irq thus causing some drivers to incorrectly assume that the PHY does not have an IRQ associated with it. Not only do some drivers report no IRQ they do not install an interrupt handler for the PHY. Simplify the code setting irq and set the phy->irq at the same time so that we cover the following issues, which should cover all the cases the code will find: - Set phy->irq if node has irq property and mdio->irq is NULL - Set phy->irq if node has no irq and mdio->irq is not NULL - Leave phy->irq as PHY_POLL default if none of the above This fixes the issue: net eth0: attached PHY 1 (IRQ -1) to driver Micrel KSZ8041RNLI to the correct: net eth0: attached PHY 1 (IRQ 416) to driver Micrel KSZ8041RNLI Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14net: of_mdio: fix of_set_phy_supported after driver probingFlorian Fainelli
Commit 8fdade4 ("net: of_mdio: parse "max-speed" property to set PHY supported features") introduced a typo in of_set_phy_supported for the first assignment of phydev->supported which will not effectively limit the PHY device supported features bits if the PHY driver contains "higher" features (e.g: max-speed = <100> and PHY driver has PHY_GBIT_FEATURES set). Fix this by making sure that the very first thing is to reset to sane defaults (PHY_BASIC_FEATURES) and then progressively add speed features as we parse them. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13phylib: Add of_phy_attachAndy Fleming
10G PHYs don't currently support running the state machine, which is implicitly setup via of_phy_connect(). Therefore, it is necessary to implement an OF version of phy_attach(), which does everything except start the state machine. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06net: of_mdio: parse "max-speed" property to set PHY supported featuresFlorian Fainelli
The "max-speed" property is defined per the ePAPR specification to express the maximum speed a PHY supports. Use that property, if present to set the phydev->supported features which properly restricts the PHY within the range of defined speeds. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06net: of_mdio: do not overwrite PHY interrupt configurationFlorian Fainelli
If irq_of_parse_and_map fails to find an interrupt line for a given PHY, we will force the PHY interrupt to be PHY_POLL, completely overriding the previous value that the MDIO bus may have set for us (e.g: PHY_IGNORE_INTERRUPT). In case of failure, just restore the previous value. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06net: of_mdio: use PHY_MAX_ADDR constantFlorian Fainelli
Use the PHY_MAX_ADDR constant for checking if a MDIO bus address is valid instead of using a plain "32". Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06net: of_mdio: factor PHY registration from of_mdiobus_registerFlorian Fainelli
Since commit 779d835e ("net: of_mdio: scan mdiobus for PHYs without reg property") we have two foreach loops which do pretty much the same thing. Factor the PHY device registration in a function helper: of_mdiobus_register_phy() which takes care of the details and allows for future PHY specific extensions. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-08net: of_mdio: fix behavior on missing phy deviceSebastian Hesselbarth
of_mdiobus_register creates a phy_device even if get_phy_device failed to create it previously. This causes indefinite polling on non-existent PHYs. This fix makes of_mdio_register rely on get_phy_device to properly create the device or fail otherwise. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08net: of_mdio: scan mdiobus for PHYs without reg propertySebastian Hesselbarth
Using DT for mdiobus and ethernet-phy requires to know the PHY address, which is hard to guess if you don't know it. This patch extends of_mdiobus_register to scan mdiobus for PHYs if reg property of the corresponding node is not set. This also allows to have phy nodes in SoC DT files where the reg property can be overwritten in the board file later. To encourage people to finally set the actual phy address, the mdiobus scan is noisier than required. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14net: phy: remove flags argument from phy_{attach, connect, connect_direct}Florian Fainelli
The flags argument of the phy_{attach,connect,connect_direct} functions is then used to assign a struct phy_device dev_flags with its value. All callers but the tg3 driver pass the flag 0, which results in the underlying PHY drivers in drivers/net/phy/ not being able to actually use any of the flags they would set in dev_flags. This patch gets rid of the flags argument, and passes phydev->dev_flags to the internal PHY library call phy_attach_direct() such that drivers which actually modify a phy device dev_flags get the value preserved for use by the underlying phy driver. Acked-by: Kosta Zertsekel <konszert@marvell.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-29of_mdio: Honour "status=disabled" property of deviceAlexander Sverdlin
Currently of_mdiobus_register() function registers all PHY devices, independetly from their status property in device tree. According to "ePAPR 1.1" spec, device should only be registered if there is no "status" property, or it has "ok" (or "okay") value (see of_device_is_available()). In case of "platform devices", of_platform_device_create_pdata() checks for "status" and ensures that disabled devices are not pupulated. But such check for MDIO buses was missing until now. Fix it. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@sysgo.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-06-27netdev/phy/of: Handle IEEE802.3 clause 45 Ethernet PHYs in of_mdiobus_register()David Daney
Define two new "compatible" values for Ethernet PHYs. "ethernet-phy-ieee802.3-c22" and "ethernet-phy-ieee802.3-c45" are used to indicate a PHY uses the corresponding protocol. If a PHY is "compatible" with "ethernet-phy-ieee802.3-c45", we indicate this so that get_phy_device() can properly probe the device. If get_phy_device() fails, it was probably due to failing the probe of the PHY identifier registers. Since we have the device tree telling us the PHY exists, go ahead and add it anyhow with a phy_id of zero. There may be a driver match based on the "compatible" property. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYsDavid Daney
The IEEE802.3 clause 45 MDIO bus protocol allows for directly addressing PHY registers using a 21 bit address, and is used by many 10G Ethernet PHYS. Already existing is the ability of MDIO bus drivers to use clause 45, with the MII_ADDR_C45 flag. Here we add struct phy_c45_device_ids to hold the device identifier registers present in clause 45. struct phy_device gets a couple of new fields: c45_ids to hold the identifiers and is_c45 to signal that it is clause 45. get_phy_device() gets a new parameter is_c45 to indicate that the PHY device should use the clause 45 protocol, and its callers are adjusted to pass false. The follow-on patch to of_mdio.c will pass true where appropriate. EXPORT phy_device_create() so that the follow-on patch to of_mdio.c can use it to create phy devices for PHYs, that have non-standard device identifier registers, based on the device tree bindings. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07netdev/of/phy: New function: of_mdio_find_bus().David Daney
Add of_mdio_find_bus() which allows an mii_bus to be located given its associated the device tree node. This is needed by the follow-on patch to add a driver for MDIO bus multiplexers. The of_mdiobus_register() function is modified so that the device tree node is recorded in the mii_bus. Then we can find it again by iterating over all mdio_bus_class devices. Because the OF device tree has now become an integral part of the kernel, this can live in mdio_bus.c (which contains the needed mdio_bus_class structure) instead of of_mdio.c. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-27of/mdio: fix fixed link bus nameBaruch Siach
Since 9e6c643b (phy/fixed: use an unique MDIO bus name) the name of the fixed PHY bus is "fixed-0". Teach of_phy_connect_fixed_link() the new name. Tested on a P1020RDB PowerPC system. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2011-10-25of_mdio: Don't phy_scan_fixups() twiceKyle Moffett
The "phy_device_register()" call 5 lines down already calls phy_scan_fixups(), there's no need to do it a second time. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-12-24of/mdio: Fix some endianness problems.David Daney
In of_mdiobus_register(), the __be32 *addr variable is dereferenced. This will not work on little-endian targets. Also since it is unsigned, checking for less than zero is redundant. Fix these two issues. Signed-off-by: David Daney <ddaney@caviumnetworks.com> [grant.likely@secretlab.ca: removed goto] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-06-28of/irq: Move irq_of_parse_and_map() to common codeGrant Likely
Merge common code between PowerPC and Microblaze. SPARC implements irq_of_parse_and_map(), but the implementation is different, so it does not use this code. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michal Simek <monstr@monstr.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
2010-05-22Merge remote branch 'origin' into secretlab/next-devicetreeGrant Likely
Merging in current state of Linus' tree to deal with merge conflicts and build failures in vio.c after merge. Conflicts: drivers/i2c/busses/i2c-cpm.c drivers/i2c/busses/i2c-mpc.c drivers/net/gianfar.c Also fixed up one line in arch/powerpc/kernel/vio.c to use the correct node pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-18of: eliminate of_device->node and dev_archdata->{of,prom}_nodeGrant Likely
This patch eliminates the node pointer from struct of_device and the of_node (or prom_node) pointer from struct dev_archdata since the node pointer is now part of struct device proper when CONFIG_OF is set, and all users of the old pointer locations have already been converted over to use device->of_node. Also remove dev_archdata_{get,set}_node() as it is no longer used by anything. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-18of: Always use 'struct device.of_node' to get device node pointer.Grant Likely
The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-04-28driver-core: Add device node pointer to struct deviceGrant Likely
Currently, platforms using CONFIG_OF add a 'struct device_node *of_node' to dev->archdata. However, with CONFIG_OF becoming generic for all architectures, it makes sense for commonality to move it out of archdata and into struct device proper. This patch adds a struct device_node *of_node member to struct device and updates all locations which currently write the device_node pointer into archdata to also update dev->of_node. Subsequent patches will modify callers to use the archdata location and ultimately remove the archdata member entirely. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> CC: Michal Simek <monstr@monstr.eu> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: "David S. Miller" <davem@davemloft.net> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: Jeremy Kerr <jeremy.kerr@canonical.com> CC: microblaze-uclinux@itee.uq.edu.au CC: linux-kernel@vger.kernel.org CC: linuxppc-dev@ozlabs.org CC: sparclinux@vger.kernel.org
2010-04-28of: check for IS_ERR()Dan Carpenter
get_phy_device() can return an ERR_PTR() Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-02-09of: assume big-endian properties, adding conversions where necessaryJeremy Kerr
Properties in the device tree are specified as big-endian. At present, the only platforms to support device trees are also big-endian, so we've been acessing the properties as raw values. We'd like to add device tree support to little-endian platforms too, so add endian conversion to the sites where we access property values in the common of code. Compiled on powerpc (ppc44x_defconfig & ppc64_defconfig) and arm (fdt support only for now). Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-10-15of: Remove nested functionJérôme Pouiller
Some toolchains dislike nested function definition, so we define function match outside of of_phy_find_device. Signed-off-by: Jérôme Pouiller <jezz@sysmic.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-07-22of/mdio: Add support function for Ethernet fixed-link propertyAnton Vorontsov
Fixed-link support is broken for the ucc_eth, gianfar, and fs_enet device drivers. The "OF MDIO rework" patches removed most of the support. Instead of re-adding fixed-link stuff to the drivers, this patch adds a support function for parsing the fixed-link property and obtaining a dummy phy to match. Note: the dummy phy handling in arch/powerpc is a bit of a hack and needs to be reworked. This function is being added now to solve the regression in the Ethernet drivers, but it should be considered a temporary measure until the fixed link handling can be reworked. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-27openfirmware: Add OF phylib support codeGrant Likely
Add support for parsing the device tree for PHY devices on an MDIO bus. Currently many of the PowerPC ethernet drivers are open coding a solution for reading data out of the device tree to find the correct PHY device. This patch implements a set of common routines to: a) let MDIO bus drivers register phy_devices described in the tree, and b) let MAC drivers find the correct phy_device via the tree. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>