summaryrefslogtreecommitdiff
path: root/drivers/of/unittest-data
AgeCommit message (Collapse)Author
2017-11-20Merge tag 'devicetree-fixes-for-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - Remove mc13892 as a trivial device - Improve of_find_node_by_name() documentation - Fix unit test dtc warnings - Clean-ups of USB binding documentation - Fix potential NULL deref in of_pci_map_rid * tag 'devicetree-fixes-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: trivial-devices: Remove fsl,mc13892 of: Document exactly what of_find_node_by_name() puts of: unittest: disable interrupts_property warning of: unittest: let dtc generate __local_fixups__ dt-bindings: usb: document hub and host-controller properties dt-bindings: usb: clean up compatible property dt-bindings: usb: fix reg-property port-number range dt-bindings: usb: fix example hub node name of/pci: Fix theoretical NULL dereference
2017-11-16of: unittest: disable interrupts_property warningRob Herring
The testcases.dts has purposely bad data which now generates a dtc warning: drivers/of/unittest-data/testcases.dtb: Warning (interrupts_property): interrupts size is (4), expected multiple of 8 in /testcase-data/testcase-device2 Disable this warning for now. The proper solution is to split the unit tests into good and bad data. Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-16of: unittest: let dtc generate __local_fixups__Rob Herring
Remove the manually added __local_fixups__ because dtc can now generate them. This also fixes a new warning in the process: drivers/of/unittest-data/testcases.dtb: Warning (interrupts_extended_property): Could not get phandle node for /__local_fixups__/testcase-data/interrupts/interrupts-extended0:interrupts-extended(cell 3) Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-14Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-08.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignoreMasahiro Yamada
Most of DT files are compiled under arch/*/boot/dts/, but we have some other directories, like drivers/of/unittest-data/. We often miss to add gitignore patterns per directory. Since there are no source files that end with .dtb or .dtb.S, we can ignore the patterns globally. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-05devicetree: Adjust status "ok" -> "okay" under drivers/of/Robert P. J. Day
Tweak a small number of status "ok" lines in a single file under /drivers/of/ to use the proper DTSpec 0.1 spelling of "okay". Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Rob Herring <robh@kernel.org>
2017-07-20of: overlay: add overlay unittest data for node names and symbolsFrank Rowand
Add nodes and properties to overlay_base and overlay dts files to test for - incorrect existing node name detection when overlay node name has a unit-address - adding overlay __symbols__ properties to live tree when an overlay is added to the live tree The following console messages will appear near the end of unittest until the code errors are corrected: OF: Duplicate name in fairway-1, renamed to "ride@100#1" ### dt-test ### FAIL of_unittest_overlay_high_level():2296 Adding overlay 'overlay_bad_symbol' failed ### dt-test ### end of unittest - 190 passed, 1 failed Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-06-27vsprintf: Add %p extension "%pOF" for device treePantelis Antoniou
90% of the usage of device node's full_name is printing it out in a kernel message. However, storing the full path for every node is wasteful and redundant. With a custom format specifier, we can generate the full path at run-time and eventually remove the full path from every node. For instance typical use is: pr_info("Frobbing node %s\n", node->full_name); Which can be written now as: pr_info("Frobbing node %pOF\n", node); '%pO' is the base specifier to represent kobjects with '%pOF' representing struct device_node. Currently, struct device_node is the only supported type of kobject. More fine-grained control of formatting includes printing the name, flags, path-spec name and others, explained in the documentation entry. Originally written by Pantelis, but pretty much rewrote the core function using existing string/number functions. The 2 passes were unnecessary and have been removed. Also, updated the checkpatch.pl check. The unittest code was written by Grant Likely. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-04-27of: Add unit tests for applying overlaysFrank Rowand
Existing overlay unit tests examine individual pieces of the overlay code. The new tests target the entire process of applying an overlay. Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
2015-03-25of/unittest: replace 'selftest' with 'unittest'Wang Long
This patch just replace the string 'selftest' with 'unittest' in OF unittest and data and binding file. I have tested it successfully on ARM. Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Rob Herring <robh@kernel.org>
2015-03-25dt: OF_UNITTEST make dependency brokenFrank Rowand
If CONFIG_OF_UNITTEST=y then a kernel image make will always cause .version to be incremented, even if there are not source changes. This is caused by a lack of dependency tracking and checking for drivers/of/unittest-data/testcases.dtb.o. Signed-off-by: Frank Rowand <frank.rowand@sonymobile.com> Signed-off-by: Rob Herring <robh@kernel.org>
2015-02-04of: unitest: Add I2C overlay unit tests.Pantelis Antoniou
Introduce I2C device tree overlay tests. Tests insertion and removal of i2c adapters, i2c devices, and muxes. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Rob Herring <robh@kernel.org>
2015-01-23of/unittest: Overlays with sub-devices testsPantelis Antoniou
Introduce selftests for overlays using sub-devices present in children nodes. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-24of/overlay: Add overlay unittestsPantelis Antoniou
Add unittests for OF overlays. It tests overlay device addition/removal and whether the apply revert sequence is correct. Changes since V1: * Added local fixups entries. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-24of/resolver: Switch to new local fixups format.Pantelis Antoniou
The original resolver format is way too cryptic, switch to using a tree based format that gets rid of repetitions, is more compact and readable. At the same time, update the selftests to using the new local fixups format. Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> [grant.likely: Squashed in testcase changes and merged similar functions] Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-11-04of/unittest: Rename selftest.c to unittest.cGrant Likely
This is unit testing code. It should use that name because it makes more sense than 'selftest'. Rename the files to match and rename the config variable. Signed-off-by: Grant Likely <grant.likely@linaro.org>