summaryrefslogtreecommitdiff
path: root/drivers/pci/controller/pci-aardvark.c
AgeCommit message (Collapse)Author
2021-07-08Merge tag 'pci-v5.14-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Fix dsm_label_utf16s_to_utf8s() buffer overrun (Krzysztof Wilczyński) - Rely on lengths from scnprintf(), dsm_label_utf16s_to_utf8s() (Krzysztof Wilczyński) - Use sysfs_emit() and sysfs_emit_at() in "show" functions (Krzysztof Wilczyński) - Fix 'resource_alignment' newline issues (Krzysztof Wilczyński) - Add 'devspec' newline (Krzysztof Wilczyński) - Dynamically map ECAM regions (Russell King) Resource management: - Coalesce host bridge contiguous apertures (Kai-Heng Feng) PCIe native device hotplug: - Ignore Link Down/Up caused by DPC (Lukas Wunner) Power management: - Leave Apple Thunderbolt controllers on for s2idle or standby (Konstantin Kharlamov) Virtualization: - Work around Huawei Intelligent NIC VF FLR erratum (Chiqijun) - Clarify error message for unbound IOV devices (Moritz Fischer) - Add pci_reset_bus_function() Secondary Bus Reset interface (Raphael Norwitz) Peer-to-peer DMA: - Simplify distance calculation (Christoph Hellwig) - Finish RCU conversion of pdev->p2pdma (Eric Dumazet) - Rename upstream_bridge_distance() and rework doc (Logan Gunthorpe) - Collect acs list in stack buffer to avoid sleeping (Logan Gunthorpe) - Use correct calc_map_type_and_dist() return type (Logan Gunthorpe) - Warn if host bridge not in whitelist (Logan Gunthorpe) - Refactor pci_p2pdma_map_type() (Logan Gunthorpe) - Avoid pci_get_slot(), which may sleep (Logan Gunthorpe) Altera PCIe controller driver: - Add Joyce Ooi as Altera PCIe maintainer (Joyce Ooi) Broadcom iProc PCIe controller driver: - Fix multi-MSI base vector number allocation (Sandor Bodo-Merle) - Support multi-MSI only on uniprocessor kernel (Sandor Bodo-Merle) Freescale i.MX6 PCIe controller driver: - Limit DBI register length for imx6qp PCIe (Richard Zhu) - Add "vph-supply" for PHY supply voltage (Richard Zhu) - Enable PHY internal regulator when supplied >3V (Richard Zhu) - Remove imx6_pcie_probe() redundant error message (Zhen Lei) Intel Gateway PCIe controller driver: - Fix INTx enable (Martin Blumenstingl) Marvell Aardvark PCIe controller driver: - Fix checking for PIO Non-posted Request (Pali Rohár) - Implement workaround for the readback value of VEND_ID (Pali Rohár) MediaTek PCIe controller driver: - Remove redundant error printing in mtk_pcie_subsys_powerup() (Zhen Lei) MediaTek PCIe Gen3 controller driver: - Add missing MODULE_DEVICE_TABLE (Zou Wei) Microchip PolarFlare PCIe controller driver: - Make struct event_descs static (Krzysztof Wilczyński) Microsoft Hyper-V host bridge driver: - Fix race condition when removing the device (Long Li) - Remove bus device removal unused refcount/functions (Long Li) Mobiveil PCIe controller driver: - Remove unused readl and writel functions (Krzysztof Wilczyński) NVIDIA Tegra PCIe controller driver: - Add missing MODULE_DEVICE_TABLE (Zou Wei) NVIDIA Tegra194 PCIe controller driver: - Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift (Jon Hunter) - Fix host initialization during resume (Vidya Sagar) Rockchip PCIe controller driver: - Register IRQ handlers after device and data are ready (Javier Martinez Canillas)" * tag 'pci-v5.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI/P2PDMA: Finish RCU conversion of pdev->p2pdma PCI: xgene: Annotate __iomem pointer PCI: Fix kernel-doc formatting PCI: cpcihp: Declare cpci_debug in header file MAINTAINERS: Add Joyce Ooi as Altera PCIe maintainer PCI: rockchip: Register IRQ handlers after device and data are ready PCI: tegra194: Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift PCI: aardvark: Implement workaround for the readback value of VEND_ID PCI: aardvark: Fix checking for PIO Non-posted Request PCI: tegra194: Fix host initialization during resume PCI: tegra: Add missing MODULE_DEVICE_TABLE PCI: imx6: Enable PHY internal regulator when supplied >3V dt-bindings: imx6q-pcie: Add "vph-supply" for PHY supply voltage PCI: imx6: Limit DBI register length for imx6qp PCIe PCI: imx6: Remove imx6_pcie_probe() redundant error message PCI: intel-gw: Fix INTx enable PCI: iproc: Support multi-MSI only on uniprocessor kernel PCI: iproc: Fix multi-MSI base vector number allocation PCI: mediatek-gen3: Add missing MODULE_DEVICE_TABLE PCI: Dynamically map ECAM regions ...
2021-06-25PCI: aardvark: Implement workaround for the readback value of VEND_IDPali Rohár
Marvell Armada 3700 Functional Errata, Guidelines, and Restrictions document describes in erratum 4.1 PCIe value of vendor ID (Ref #: 243): The readback value of VEND_ID (RD0070000h [15:0]) is 1B4Bh, while it should read 11ABh. The firmware can write the correct value, 11ABh, through VEND_ID (RD0076044h [15:0]). Implement this workaround in aardvark driver for both PCI vendor id and PCI subsystem vendor id. This change affects and fixes PCI vendor id of emulated PCIe root bridge. After this change emulated PCIe root bridge has correct vendor id. Link: https://lore.kernel.org/r/20210624222621.4776-5-pali@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org
2021-06-25PCI: aardvark: Fix checking for PIO Non-posted RequestPali Rohár
PIO_NON_POSTED_REQ for PIO_STAT register is incorrectly defined. Bit 10 in register PIO_STAT indicates the response is to a non-posted request. Link: https://lore.kernel.org/r/20210624213345.3617-2-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org
2021-06-18PCI: aardvark: Fix kernel panic during PIO transferPali Rohár
Trying to start a new PIO transfer by writing value 0 in PIO_START register when previous transfer has not yet completed (which is indicated by value 1 in PIO_START) causes an External Abort on CPU, which results in kernel panic: SError Interrupt on CPU0, code 0xbf000002 -- SError Kernel panic - not syncing: Asynchronous SError Interrupt To prevent kernel panic, it is required to reject a new PIO transfer when previous one has not finished yet. If previous PIO transfer is not finished yet, the kernel may issue a new PIO request only if the previous PIO transfer timed out. In the past the root cause of this issue was incorrectly identified (as it often happens during link retraining or after link down event) and special hack was implemented in Trusted Firmware to catch all SError events in EL3, to ignore errors with code 0xbf000002 and not forwarding any other errors to kernel and instead throw panic from EL3 Trusted Firmware handler. Links to discussion and patches about this issue: https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50 https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/ https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/ https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541 But the real cause was the fact that during link retraining or after link down event the PIO transfer may take longer time, up to the 1.44s until it times out. This increased probability that a new PIO transfer would be issued by kernel while previous one has not finished yet. After applying this change into the kernel, it is possible to revert the mentioned TF-A hack and SError events do not have to be caught in TF-A EL3. Link: https://lore.kernel.org/r/20210608203655.31228-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # 7fbcb5da811b ("PCI: aardvark: Don't rely on jiffies while holding spinlock")
2020-12-15Merge branch 'remotes/lorenzo/pci/aardvark'Bjorn Helgaas
- Update comment about delay before link training (Pali Rohár) * remotes/lorenzo/pci/aardvark: PCI: aardvark: Update comment about disabling link training
2020-12-10PCI: Unify ECAM constants in native PCI Express driversKrzysztof Wilczyński
Add ECAM-related constants to provide a set of standard constants defining memory address shift values to the byte-level address that can be used to access the PCI Express Configuration Space, and then move native PCI Express controller drivers to use the newly introduced definitions retiring driver-specific ones. Refactor pci_ecam_map_bus() function to use newly added constants so that limits to the bus, device function and offset (now limited to 4K as per the specification) are in place to prevent the defective or malicious caller from supplying incorrect configuration offset and thus targeting the wrong device when accessing extended configuration space. This refactor also allows for the ".bus_shift" initialisers to be dropped when the user is not using a custom value as a default value will be used as per the PCI Express Specification. Thanks to Qian Cai <qcai@redhat.com>, Michael Walle <michael@walle.cc>, and Vladimir Oltean <olteanv@gmail.com> for reporting a pci_ecam_create() issue with .bus_shift and to Vladimir for proposing the fix. [bhelgaas: incorporate Vladimir's fix, update commit log] Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20201129230743.3006978-2-kw@linux.com Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jon Derrick <jonathan.derrick@intel.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-07PCI: aardvark: Update comment about disabling link trainingPali Rohár
According to PCI Express Base Specifications (rev 4.0, 6.6.1 "Conventional reset"), after fundamental reset a 100ms delay is needed prior to enabling link training. Update comment in code to reflect this requirement. Link: https://lore.kernel.org/r/20201202184659.3795-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-10-02PCI: aardvark: Fix initialization with old Marvell's Arm Trusted FirmwarePali Rohár
Old ATF automatically power on pcie phy and does not provide SMC call for phy power on functionality which leads to aardvark initialization failure: [ 0.330134] mvebu-a3700-comphy d0018300.phy: unsupported SMC call, try updating your firmware [ 0.338846] phy phy-d0018300.phy.1: phy poweron failed --> -95 [ 0.344753] advk-pcie d0070000.pcie: Failed to initialize PHY (-95) [ 0.351160] advk-pcie: probe of d0070000.pcie failed with error -95 This patch fixes above failure by ignoring 'not supported' error in aardvark driver. In this case it is expected that phy is already power on. Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Link: https://lore.kernel.org/r/20200902144344.16684-3-pali@kernel.org Fixes: 366697018c9a ("PCI: aardvark: Add PHY support") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: <stable@vger.kernel.org> # 5.8+: ea17a0f153af: phy: marvell: comphy: Convert internal SMCC firmware return codes to errno
2020-09-07PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link()Pali Rohár
Move code which belongs to link training (delays and resets) into advk_pcie_train_link() function, so everything related to link training, including timings is at one place. After experiments it can be observed that link training in aardvark hardware is very sensitive to timings and delays, so it is a good idea to have this code at the same place as link training calls. This patch does not change behavior of aardvark initialization. Link: https://lore.kernel.org/r/20200907111038.5811-6-pali@kernel.org Tested-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-09-07PCI: aardvark: Implement driver 'remove' function and allow to build it as ↵Pali Rohár
module Providing driver's 'remove' function allows kernel to bind and unbind devices from aardvark driver. It also allows to build aardvark driver as a module. Compiling aardvark as a module simplifies development and debugging of this driver as it can be reloaded at runtime without the need to reboot to new kernel. Link: https://lore.kernel.org/r/20200907111038.5811-5-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <marek.behun@nic.cz>
2020-09-07PCI: aardvark: Check for errors from pci_bridge_emul_init() callPali Rohár
Function pci_bridge_emul_init() may fail so correctly check for errors. Link: https://lore.kernel.org/r/20200907111038.5811-3-pali@kernel.org Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <marek.behun@nic.cz>
2020-09-07PCI: aardvark: Fix compilation on s390Pali Rohár
Include linux/gpio/consumer.h instead of linux/gpio.h, as is said in the latter file. This was reported by kernel test bot when compiling for s390. drivers/pci/controller/pci-aardvark.c:350:2: error: implicit declaration of function 'gpiod_set_value_cansleep' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-aardvark.c:1074:21: error: implicit declaration of function 'devm_gpiod_get_from_of_node' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-aardvark.c:1076:14: error: use of undeclared identifier 'GPIOD_OUT_LOW' Link: https://lore.kernel.org/r/202006211118.LxtENQfl%25lkp@intel.com Link: https://lore.kernel.org/r/20200907111038.5811-2-pali@kernel.org Fixes: 5169a9851daa ("PCI: aardvark: Issue PERST via GPIO") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marek Behún <marek.behun@nic.cz>
2020-08-05Merge branch 'pci/host-probe-refactor'Bjorn Helgaas
- Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Convert to devm_platform_ioremap_resource_byname() instead of open-coding platform_get_resource_byname() and devm_ioremap_resource() for altera, cadence, mediatek, rockchip, tegra, xgene (Dejin Zheng) - Convert to devm_platform_ioremap_resource() instead of open-coding platform_get_resource() and devm_ioremap_resource() for aardvark, brcmstb, exynos, ftpci100, versatile (Dejin Zheng) - Remove redundant error messages from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Drop useless PCI_ENABLE_PROC_DOMAINS from versatile driver (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Drop unnecessary zeroing of host bridge fields (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Use bridge resources instead of parsing DT 'ranges' again for cadence (Rob Herring) - Remove private bus number and range from cadence (Rob Herring) - Use devm_pci_alloc_host_bridge() to simplify rcar (Rob Herring) - Use struct pci_host_bridge.windows list directly rather than a temporary (Rob Herring) - Reduce OF "missing non-prefetchable window" from error to warning message (Rob Herring) - Convert rcar-gen2 from old Arm-specific pci_common_init_dev() to new arch-independent interfaces (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) * pci/host-probe-refactor: PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: of: Reduce missing non-prefetchable memory region to a warning PCI: rcar: Use struct pci_host_bridge.windows list directly PCI: rcar: Use devm_pci_alloc_host_bridge() PCI: cadence: Remove private bus number and range storage PCI: cadence: Use bridge resources for outbound window setup PCI: Move setting pci_host_bridge.busnr out of host drivers PCI: rcar: Use pci_is_root_bus() to check if bus is root bus PCI: rockchip: Use pci_is_root_bus() to check if bus is root bus PCI: xilinx: Use pci_is_root_bus() to check if bus is root bus PCI: xilinx-nwl: Use pci_is_root_bus() to check if bus is root bus PCI: mobiveil: Use pci_is_root_bus() to check if bus is root bus PCI: designware: Use pci_is_root_bus() to check if bus is root bus PCI: aardvark: Use pci_is_root_bus() to check if bus is root bus PCI: Drop unnecessary zeroing of bridge fields PCI: Set default bridge parent device PCI: versatile: Drop flag PCI_ENABLE_PROC_DOMAINS PCI: controller: Remove duplicate error message PCI: controller: Convert to devm_platform_ioremap_resource() PCI: controller: Convert to devm_platform_ioremap_resource_byname() PCI: xilinx: Use pci_host_probe() to register host PCI: xilinx-nwl: Use pci_host_probe() to register host PCI: rockchip: Use pci_host_probe() to register host PCI: rcar: Use pci_host_probe() to register host PCI: iproc: Use pci_host_probe() to register host PCI: altera: Use pci_host_probe() to register host PCI: xgene: Use pci_host_probe() to register host PCI: versatile: Use pci_host_probe() to register host PCI: v3: Use pci_host_probe() to register host PCI: tegra: Use pci_host_probe() to register host PCI: mobiveil: Use pci_host_probe() to register host PCI: brcmstb: Use pci_host_probe() to register host PCI: host-common: Use struct pci_host_bridge.windows list directly PCI: mvebu: Use struct pci_host_bridge.windows list directly PCI: cadence: Use struct pci_host_bridge.windows list directly # Conflicts: # drivers/pci/controller/cadence/pcie-cadence-host.c
2020-08-04PCI: Set bridge map_irq and swizzle_irq to default functionsRob Herring
The majority of DT based host drivers use the default .map_irq() and .swizzle_irq() functions, so let's initialize the function pointers to the default and drop setting them in the host drivers. Drivers like iProc which don't support legacy interrupts need to set .map_irq() back to NULL. Link: https://lore.kernel.org/r/20200722022514.1283916-20-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2020-08-04PCI: Move DT resource setup into devm_pci_alloc_host_bridge()Rob Herring
Now that pci_parse_request_of_pci_ranges() callers just setup pci_host_bridge.windows and dma_ranges directly and don't need the bus range returned, we can just initialize them when allocating the pci_host_bridge struct. With this, pci_parse_request_of_pci_ranges() becomes a static function. Link: https://lore.kernel.org/r/20200722022514.1283916-19-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2020-07-23PCI: Move setting pci_host_bridge.busnr out of host driversRob Herring
Most host drivers only parse the DT bus range to set the root bus number in pci_host_bridge.busnr. The ones that don't set busnr are buggy in that they ignore what's in DT. Let's set busnr in pci_scan_root_bus_bridge() where we already check for the bus resource and remove setting it in host drivers. Link: https://lore.kernel.org/r/20200722022514.1283916-12-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Will Deacon <will@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: linux-tegra@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org
2020-07-23PCI: aardvark: Use pci_is_root_bus() to check if bus is root busRob Herring
Use pci_is_root_bus() rather than tracking the root bus number to determine if the bus is the root bus or not. This removes storing duplicated data as well as the need for the host bridge driver to have to care about the bus numbers in most cases. Link: https://lore.kernel.org/r/20200722022514.1283916-5-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2020-07-23PCI: Drop unnecessary zeroing of bridge fieldsRob Herring
The struct pci_host_bridge is 0 initialized when allocated, so there's no need to explicitly set fields to 0. Link: https://lore.kernel.org/r/20200722022514.1283916-4-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2020-07-23PCI: Set default bridge parent deviceRob Herring
The host bridge's parent device is always the platform device. As we already have a pointer to it in the devres functions, let's initialize the parent device. Drivers can still override the parent if desired. Link: https://lore.kernel.org/r/20200722022514.1283916-3-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2020-07-21PCI: aardvark: Don't touch PCIe registers if no card connectedPali Rohár
When there is no PCIe card connected and advk_pcie_rd_conf() or advk_pcie_wr_conf() is called for PCI bus which doesn't belong to emulated root bridge, the aardvark driver throws the following error message: advk-pcie d0070000.pcie: config read/write timed out Obviously accessing PCIe registers of disconnected card is not possible. Extend check in advk_pcie_valid_device() function for validating availability of PCIe bus. If PCIe link is down, then the device is marked as Not Found and the driver does not try to access these registers. This is just an optimization to prevent accessing PCIe registers when card is disconnected. Trying to access PCIe registers of disconnected card does not cause any crash, kernel just needs to wait for a timeout. So if card disappear immediately after checking for PCIe link (before accessing PCIe registers), it does not cause any problems. Link: https://lore.kernel.org/r/20200702083036.12230-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-07-10PCI: controller: Convert to devm_platform_ioremap_resource()Dejin Zheng
Use devm_platform_ioremap_resource() to simplify the code, since t contains platform_get_resource() and devm_ioremap_resource() calls respectively. Link: https://lore.kernel.org/r/20200708155614.308-1-zhengdejin5@gmail.com Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-07-07PCI: aardvark: Indicate error in 'val' when config read failsPali Rohár
Most callers of config read do not check for return value. But most of the ones that do, checks for error indication in 'val' variable. This patch updates error handling in advk_pcie_rd_conf() function. If PIO transfer fails then 'val' variable is set to 0xffffffff which indicates failture. Link: https://lore.kernel.org/r/20200528162604.GA323482@bjorn-Precision-5520 Link: https://lore.kernel.org/r/20200601130315.18895-1-pali@kernel.org Reported-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-06-04Merge branch 'remotes/lorenzo/pci/aardvark'Bjorn Helgaas
- Train link immediately after enabling link training to avoid issues with Compex WLE900VX and Turris MOX devices (Pali Rohár) - Remove ASPM config and let the PCI core do it (Pali Rohár) - Interpret zero 'max-link-speed' value as invalid (Pali Rohár) - Respect the 'max-link-speed' property and improve link training (Marek Behún) - Issue PERST via GPIO (Pali Rohár) - Add PHY support (Marek Behún) - Use standard PCIe capability macros (Pali Rohár) - Document new 'max-link-speed', 'phys', and 'reset-gpios' properties (Marek Behún) * remotes/lorenzo/pci/aardvark: dt-bindings: PCI: aardvark: Describe new properties PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros PCI: aardvark: Add PHY support PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG access PCI: aardvark: Issue PERST via GPIO PCI: aardvark: Improve link training PCI: of: Zero max-link-speed value is invalid PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only register PCI: aardvark: Train link immediately after enabling training
2020-05-18PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macrosPali Rohár
PCI-E capability macros are already defined in linux/pci_regs.h. Remove their reimplementation in pcie-aardvark. Link: https://lore.kernel.org/r/20200430080625.26070-9-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-05-18PCI: aardvark: Add PHY supportMarek Behún
With recent proposed changes for U-Boot it is possible that bootloader won't initialize the PHY for this controller (currently the PHY is initialized regardless whether PCI is used in U-Boot, but with these proposed changes the PHY is initialized only on request). Since the mvebu-a3700-comphy driver by Miquèl Raynal supports enabling PCIe PHY, and since Linux' functionality should be independent on what bootloader did, add code for enabling generic PHY if found in device OF node. The mvebu-a3700-comphy driver does PHY powering via SMC calls to ARM Trusted Firmware. The corresponding code in ARM Trusted Firmware skips one register write which U-Boot does not: step 7 ("Enable TX"), see [1]. Instead ARM Trusted Firmware expects PCIe driver to do this step, probably because the register is in PCIe controller address space, instead of PHY address space. We therefore add this step into the advk_pcie_setup_hw function. [1] https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/tree/drivers/marvell/comphy/phy-comphy-3700.c?h=v2.3-rc2#n836 Link: https://lore.kernel.org/r/20200430080625.26070-8-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Miquèl Raynal <miquel.raynal@bootlin.com>
2020-05-18PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG accessPali Rohár
This register is applicable only when the controller is configured for Endpoint mode, which is not the case for the current version of this driver. Attempting to remove this code though caused some ath10k cards to stop working, so for some unknown reason it is needed here. This should be investigated and a comment explaining this should be put before the code, so we add a FIXME comment for now. Link: https://lore.kernel.org/r/20200430080625.26070-7-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-05-18PCI: aardvark: Issue PERST via GPIOPali Rohár
Add support for issuing PERST via GPIO specified in 'reset-gpios' property (as described in PCI device tree bindings). Some buggy cards (e.g. Compex WLE900VX or WLE1216) are not detected after reboot when PERST is not issued during driver initialization. If bootloader already enabled link training then issuing PERST has no effect for some buggy cards (e.g. Compex WLE900VX) and these cards are not detected. We therefore clear the LINK_TRAINING_EN register before. It was observed that Compex WLE900VX card needs to be in PERST reset for at least 10ms if bootloader enabled link training. Tested on Turris MOX. Link: https://lore.kernel.org/r/20200430080625.26070-6-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-05-18PCI: aardvark: Improve link trainingMarek Behún
Currently the aardvark driver trains link in PCIe gen2 mode. This may cause some buggy gen1 cards (such as Compex WLE900VX) to be unstable or even not detected. Moreover when ASPM code tries to retrain link second time, these cards may stop responding and link goes down. If gen1 is used this does not happen. Unconditionally forcing gen1 is not a good solution since it may have performance impact on gen2 cards. To overcome this, read 'max-link-speed' property (as defined in PCI device tree bindings) and use this as max gen mode. Then iteratively try link training at this mode or lower until successful. After successful link training choose final controller gen based on Negotiated Link Speed from Link Status register, which should match card speed. Link: https://lore.kernel.org/r/20200430080625.26070-5-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-05-18PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only ↵Pali Rohár
register Trying to change Link Status register does not have any effect as this is a read-only register. Trying to overwrite bits for Negotiated Link Width does not make sense. In future proper change of link width can be done via Lane Count Select bits in PCIe Control 0 register. Trying to unconditionally enable ASPM L0s via ASPM Control bits in Link Control register is wrong. There should be at least some detection if endpoint supports L0s as isn't mandatory. Moreover ASPM Control bits in Link Control register are controlled by pcie/aspm.c code which sets it according to system ASPM settings, immediately after aardvark driver probes. So setting these bits by aardvark driver has no long running effect. Remove code which touches ASPM L0s bits from this driver and let kernel's ASPM implementation to set ASPM state properly. Some users are reporting issues that this code is problematic for some Intel wifi cards and removing it fixes them, see e.g.: https://bugzilla.kernel.org/show_bug.cgi?id=196339 If problems with Intel wifi cards occur even after this commit, then pcie/aspm.c code could be modified / hooked to not enable ASPM L0s state for affected problematic cards. Link: https://lore.kernel.org/r/20200430080625.26070-3-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-05-18PCI: aardvark: Train link immediately after enabling trainingPali Rohár
Adding even 100ms (PCI_PM_D3COLD_WAIT) delay between enabling link training and starting link training causes detection issues with some buggy cards (such as Compex WLE900VX). Move the code which enables link training immediately before the one which starts link traning. This fixes detection issues of Compex WLE900VX card on Turris MOX after cold boot. Link: https://lore.kernel.org/r/20200430080625.26070-2-pali@kernel.org Fixes: f4c7d053d7f7 ("PCI: aardvark: Wait for endpoint to be ready...") Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2020-05-12PCI: Check for platform_get_irq() failure consistentlyAman Sharma
The platform_get_irq*() interfaces return either a negative error number or a valid IRQ. 0 is not a valid return value, so check for "< 0" to detect failure as recommended by the function documentation. On failure, return the error number from platform_get_irq*() instead of making up a new one. Link: https://lore.kernel.org/r/cover.1583952275.git.amanharitsh123@gmail.com [bhelgaas: commit log, squash into one patch] Signed-off-by: Aman Sharma <amanharitsh123@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in> Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
2019-11-28Merge branch 'remotes/lorenzo/pci/mmio-dma-ranges'Bjorn Helgaas
- Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) * remotes/lorenzo/pci/mmio-dma-ranges: PCI: Make devm_of_pci_get_host_bridge_resources() static PCI: rcar: Use inbound resources for setup PCI: iproc: Use inbound resources for setup PCI: xgene: Use inbound resources for setup PCI: v3-semi: Use inbound resources for setup PCI: ftpci100: Use inbound resources for setup PCI: of: Add inbound resource parsing to helpers PCI: versatile: Enable COMPILE_TEST PCI: versatile: Remove usage of PHYS_OFFSET PCI: versatile: Use pci_parse_request_of_pci_ranges() PCI: xilinx-nwl: Use pci_parse_request_of_pci_ranges() PCI: xilinx: Use pci_parse_request_of_pci_ranges() PCI: xgene: Use pci_parse_request_of_pci_ranges() PCI: v3-semi: Use pci_parse_request_of_pci_ranges() PCI: rockchip: Drop storing driver private outbound resource data PCI: rockchip: Use pci_parse_request_of_pci_ranges() PCI: mobiveil: Use pci_parse_request_of_pci_ranges() PCI: mediatek: Use pci_parse_request_of_pci_ranges() PCI: iproc: Use pci_parse_request_of_pci_ranges() PCI: faraday: Use pci_parse_request_of_pci_ranges() PCI: dwc: Use pci_parse_request_of_pci_ranges() PCI: altera: Use pci_parse_request_of_pci_ranges() PCI: aardvark: Use pci_parse_request_of_pci_ranges() PCI: Export pci_parse_request_of_pci_ranges() resource: Add a resource_list_first_type helper # Conflicts: # drivers/pci/controller/pcie-rcar.c
2019-11-28Merge branch 'remotes/lorenzo/pci/aardvark'Bjorn Helgaas
- Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) * remotes/lorenzo/pci/aardvark: PCI: pci-bridge-emul: Fix big-endian support PCI: aardvark: Fix big endian support PCI: aardvark: Don't rely on jiffies while holding spinlock PCI: aardvark: Fix PCI_EXP_RTCTL register configuration PCI: aardvark: Wait for endpoint to be ready before training link PCI: aardvark: Use LTSSM state to build link training flag
2019-11-21PCI: Remove unused includes and superfluous struct declarationKrzysztof Wilczynski
Remove <linux/pci.h> and <linux/msi.h> from being included directly as part of the include/linux/of_pci.h, and remove superfluous declaration of struct of_phandle_args. Move users of include <linux/of_pci.h> to include <linux/pci.h> and <linux/msi.h> directly rather than rely on both being included transitively through <linux/of_pci.h>. Link: https://lore.kernel.org/r/20190903113059.2901-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2019-11-20PCI: of: Add inbound resource parsing to helpersRob Herring
Extend devm_of_pci_get_host_bridge_resources() and pci_parse_request_of_pci_ranges() helpers to also parse the inbound addresses from DT 'dma-ranges' and populate a resource list with the translated addresses. This will help ensure 'dma-ranges' is always parsed in a consistent way. Tested-by: Srinath Mannam <srinath.mannam@broadcom.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> # for AArdvark Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Srinath Mannam <srinath.mannam@broadcom.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Will Deacon <will@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Toan Le <toan@os.amperecomputing.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Tom Joseph <tjoseph@cadence.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in> Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Cc: Simon Horman <horms@verge.net.au> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Michal Simek <michal.simek@xilinx.com> Cc: rfi@lists.rocketboards.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org
2019-10-29PCI: aardvark: Use pci_parse_request_of_pci_ranges()Rob Herring
Convert aardvark to use the common pci_parse_request_of_pci_ranges(). There's no need to assign the resources to a temporary list first. Just use bridge->windows directly and remove all the temporary list handling. Tested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2019-10-17PCI: aardvark: Fix big endian supportGrzegorz Jaszczyk
Initialise every multiple-byte field of emulated PCI bridge config space with proper cpu_to_le* macro. This is required since the structure describing config space of emulated bridge assumes little-endian convention. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2019-10-15PCI: aardvark: Don't rely on jiffies while holding spinlockRemi Pommarel
advk_pcie_wait_pio() can be called while holding a spinlock (from pci_bus_read_config_dword()), then depends on jiffies in order to timeout while polling on PIO state registers. In the case the PIO transaction failed, the timeout will never happen and will also cause the cpu to stall. This decrements a variable and wait instead of using jiffies. Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-10-15PCI: aardvark: Fix PCI_EXP_RTCTL register configurationRemi Pommarel
PCI_EXP_RTCTL is used to activate PME interrupt only, so writing into it should not modify other interrupts' mask. The ISR mask polarity was also inverted, when PCI_EXP_RTCTL_PMEIE is set PCIE_MSG_PM_PME_MASK mask bit should actually be cleared. Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-10-15PCI: aardvark: Wait for endpoint to be ready before training linkRemi Pommarel
When configuring pcie reset pin from gpio (e.g. initially set by u-boot) to pcie function this pin goes low for a brief moment asserting the PERST# signal. Thus connected device enters fundamental reset process and link configuration can only begin after a minimal 100ms delay (see [1]). Because the pin configuration comes from the "default" pinctrl it is implicitly configured before the probe callback is called: driver_probe_device() really_probe() ... pinctrl_bind_pins() /* Here pin goes from gpio to PCIE reset function and PERST# is asserted */ ... drv->probe() [1] "PCI Express Base Specification", REV. 4.0 PCI Express, February 19 2014, 6.6.1 Conventional Reset Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-10-14PCI: aardvark: Use LTSSM state to build link training flagRemi Pommarel
Aardvark's PCI_EXP_LNKSTA_LT flag in its link status register is not implemented and does not reflect the actual link training state (the flag is always set to 0). In order to support link re-training feature this flag has to be emulated. The Link Training and Status State Machine (LTSSM) flag in Aardvark LMI config register could be used as a link training indicator. Indeed if the LTSSM is in L0 or upper state then link training has completed (see [1]). Unfortunately because after asking a link retraining it takes a while for the LTSSM state to become less than 0x10 (due to L0s to recovery state transition delays), LTSSM can still be in L0 while link training has not finished yet. So this waits for link to be in recovery or lesser state before returning after asking for a link retrain. [1] "PCI Express Base Specification", REV. 4.0 PCI Express, February 19 2014, Table 4-14 Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Tested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-07-09PCI: Fix typos and whitespace errorsBjorn Helgaas
Fix typos in drivers/pci. Comment and whitespace changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
2019-04-01PCI: aardvark: Fix a leaked reference by adding missing of_node_put()Wen Yang
The call to of_get_next_child() returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. irq_domain_add_linear() also calls of_node_get() to increase refcount, so irq_domain will not be affected when it is released. Detected by coccinelle with the following warnings: ./drivers/pci/controller/pci-aardvark.c:826:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 798, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org
2019-03-01PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' staticWei Yongjun
Fix the following sparse warning: drivers/pci/controller/pci-aardvark.c:469:28: warning: symbol 'advk_pci_bridge_emul_ops' was not declared. Should it be static? Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2019-02-22PCI: pci-bridge-emul: Extend pci_bridge_emul_init() with flagsThomas Petazzoni
Depending on the capabilities of the PCI controller/platform, the PCI-to-PCI bridge emulation behavior might need to be different. For example, on platforms that use the pci-mvebu code, we currently don't support prefetchable memory BARs, so the corresponding fields in the PCI-to-PCI bridge configuration space should be read-only. To implement this, extend pci_bridge_emul_init() to take a "flags" argument, with currently one flag supported: PCI_BRIDGE_EMUL_NO_PREFETCHABLE_BAR that will make the prefetchable memory base and limit registers read-only. The pci-mvebu and pci-aardvark drivers are updated accordingly. Fixes: 1f08673eef123 ("PCI: mvebu: Convert to PCI emulated bridge config space") Reported-by: Luís Mendes <luis.p.mendes@gmail.com> Reported-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Leigh Brown <leigh@solinno.co.uk> Tested-by: Luis Mendes <luis.p.mendes@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org Cc: Luís Mendes <luis.p.mendes@gmail.com> Cc: Leigh Brown <leigh@solinno.co.uk>
2018-10-18PCI: aardvark: Implement emulated root PCI bridge config spaceZachary Zhang
The PCI controller in the Marvell Armada 3720 does not implement a software-accessible root port PCI bridge configuration space. This causes a number of problems when using PCIe switches or when the Max Payload size needs to be aligned between the root complex and the endpoint. Implementing an emulated root PCI bridge, like is already done in the pci-mvebu driver for older Marvell platforms allows to solve those issues, and also to support features such as ASR, PME, VC, HP. Signed-off-by: Zachary Zhang <zhangzg@marvell.com> [Thomas: convert to the common emulated PCI bridge logic.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-08-15Merge branch 'remotes/lorenzo/pci/aardvark'Bjorn Helgaas
- Remove Aardvark outbound window configuration (Evan Wang) - Fix Aardvark bridge window sizing issue (Zachary Zhang) - Convert Aardvark to use pci_host_probe() to reduce code duplication (Thomas Petazzoni) * remotes/lorenzo/pci/aardvark: PCI: aardvark: Convert to use pci_host_probe() PCI: aardvark: Size bridges before resources allocation PCI: aardvark: Remove PCIe outbound window configuration PCI: aardvark: Introduce an advk_pcie_valid_device() helper # Conflicts: # drivers/pci/controller/pci-aardvark.c
2018-07-18PCI: aardvark: Fix I/O space page leakSergei Shtylyov
When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY driver was left disabled, the kernel crashed with this BUG: kernel BUG at lib/ioremap.c:72! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092 Hardware name: Renesas Condor board based on r8a77980 (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : ioremap_page_range+0x370/0x3c8 lr : ioremap_page_range+0x40/0x3c8 sp : ffff000008da39e0 x29: ffff000008da39e0 x28: 00e8000000000f07 x27: ffff7dfffee00000 x26: 0140000000000000 x25: ffff7dfffef00000 x24: 00000000000fe100 x23: ffff80007b906000 x22: ffff000008ab8000 x21: ffff000008bb1d58 x20: ffff7dfffef00000 x19: ffff800009c30fb8 x18: 0000000000000001 x17: 00000000000152d0 x16: 00000000014012d0 x15: 0000000000000000 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0720072007300730 x10: 00000000000000ae x9 : 0000000000000000 x8 : ffff7dffff000000 x7 : 0000000000000000 x6 : 0000000000000100 x5 : 0000000000000000 x4 : 000000007b906000 x3 : ffff80007c61a880 x2 : ffff7dfffeefffff x1 : 0000000040000000 x0 : 00e80000fe100f07 Process kworker/0:1 (pid: 39, stack limit = 0x (ptrval)) Call trace: ioremap_page_range+0x370/0x3c8 pci_remap_iospace+0x7c/0xac pci_parse_request_of_pci_ranges+0x13c/0x190 rcar_pcie_probe+0x4c/0xb04 platform_drv_probe+0x50/0xbc driver_probe_device+0x21c/0x308 __device_attach_driver+0x98/0xc8 bus_for_each_drv+0x54/0x94 __device_attach+0xc4/0x12c device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 deferred_probe_work_func+0xb0/0x150 process_one_work+0x12c/0x29c worker_thread+0x200/0x3fc kthread+0x108/0x134 ret_from_fork+0x10/0x18 Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000) It turned out that pci_remap_iospace() wasn't undone when the driver's probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER, the probe was retried, finally causing the BUG due to trying to remap already remapped pages. The Aardvark PCI controller driver has the same issue. Replace pci_remap_iospace() with its devm_ managed version to fix the bug. Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> [lorenzo.pieralisi@arm.com: updated the commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-06PCI: aardvark: Convert to use pci_host_probe()Thomas Petazzoni
Part of advk_pcie_probe() is exactly an open-coded version of pci_host_probe(). So instead of duplicating this code, use pci_host_probe() directly. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-07-06PCI: aardvark: Size bridges before resources allocationZachary Zhang
The PCIE I/O and MEM resource allocation mechanism is that root bus goes through the following steps: 1. Check PCI bridges' range and computes I/O and Mem base/limits. 2. Sort all subordinate devices I/O and MEM resource requirements and allocate the resources and writes/updates subordinate devices' requirements to PCI bridges I/O and Mem MEM/limits registers. Currently, PCI Aardvark driver only handles the second step and lacks the first step, so there is an I/O and MEM resource allocation failure when using a PCI switch. This commit fixes that by sizing bridges before doing the resource allocation. Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Zachary Zhang <zhangzg@marvell.com> [Thomas: edit commit log.] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: <stable@vger.kernel.org>
generated by cgit (git 2.34.1) at 2025-04-24 06:04:32 +0000