summaryrefslogtreecommitdiff
path: root/drivers/pci/endpoint
AgeCommit message (Collapse)Author
2024-01-17Merge tag 'char-misc-6.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits) android: removed duplicate linux/errno uio: Fix use-after-free in uio_open drivers: soc: xilinx: add check for platform firmware: xilinx: Export function to use in other module scripts/tags.sh: remove find_sources scripts/tags.sh: use -n to test archinclude scripts/tags.sh: add local annotation scripts/tags.sh: use more portable -path instead of -wholename scripts/tags.sh: Update comment (addition of gtags) firmware: zynqmp: Convert to platform remove callback returning void firmware: turris-mox-rwtm: Convert to platform remove callback returning void firmware: stratix10-svc: Convert to platform remove callback returning void firmware: stratix10-rsu: Convert to platform remove callback returning void firmware: raspberrypi: Convert to platform remove callback returning void firmware: qemu_fw_cfg: Convert to platform remove callback returning void firmware: mtk-adsp-ipc: Convert to platform remove callback returning void firmware: imx-dsp: Convert to platform remove callback returning void firmware: coreboot_table: Convert to platform remove callback returning void firmware: arm_scpi: Convert to platform remove callback returning void firmware: arm_scmi: Convert to platform remove callback returning void ...
2024-01-15Merge branch 'pci/endpoint'Bjorn Helgaas
- Make struct pci_epc_event_ops and struct pci_epf_ops instances const (Lars-Peter Clausen) * pci/endpoint: PCI: endpoint: pci-epf-test: Make struct pci_epf_ops const PCI: endpoint: pci-epf-vntb: Make struct pci_epf_ops const PCI: endpoint: pci-epf-ntb: Make struct pci_epf_ops const PCI: endpoint: pci-epf-mhi: Make structs pci_epf_ops and pci_epf_event_ops const PCI: endpoint: Make struct pci_epf_ops in pci_epf_driver const
2023-12-18PCI: endpoint: pci-epf-test: Make struct pci_epf_ops constLars-Peter Clausen
The pci_epf_ops struct for the PCI endpoint test driver is never modified. Mark it as const so it can be placed in the read-only section. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20230722230848.589428-5-lars@metafoo.de Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-12-18PCI: endpoint: pci-epf-vntb: Make struct pci_epf_ops constLars-Peter Clausen
The pci_epf_ops struct for the PCI endpoint vNTB driver is never modified. Mark it as const so it can be placed in the read-only section. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20230722230848.589428-4-lars@metafoo.de Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-12-18PCI: endpoint: pci-epf-ntb: Make struct pci_epf_ops constLars-Peter Clausen
The pci_epf_ops struct for the PCI endpoint NTB driver is never modified. Mark it as const so it can be placed in the read-only section. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20230722230848.589428-3-lars@metafoo.de Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-12-18PCI: endpoint: pci-epf-mhi: Make structs pci_epf_ops and pci_epf_event_ops constLars-Peter Clausen
Both the pci_epf_ops and pci_epf_evnt_ops structs for the PCI endpoint MHI driver are never modified. Mark them as const so they can be placed in the read-only section. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20230722230848.589428-2-lars@metafoo.de Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-12-18PCI: endpoint: Rename LEGACY to INTX in test function driverDamien Le Moal
In the endpoint test function driver, rename IRQ_TYPE_LEGACY to IRQ_TYPE_INTX and COMMAND_RAISE_LEGACY_IRQ to COMMAND_RAISE_INTX_IRQ to match the term used in the PCI specifications. Link: https://lore.kernel.org/r/20231122060406.14695-5-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2023-12-18PCI: endpoint: Use INTX instead of legacyDamien Le Moal
In the endpoint controller core code, change references to "legacy" interrupts to "INTX" interrupts to match the term used in the PCI specifications. Link: https://lore.kernel.org/r/20231122060406.14695-4-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2023-12-18PCI: endpoint: Drop PCI_EPC_IRQ_XXX definitionsDamien Le Moal
linux/pci.h defines the IRQ flags PCI_IRQ_INTX, PCI_IRQ_MSI and PCI_IRQ_MSIX. Let's use these flags directly instead of the endpoint definitions provided by enum pci_epc_irq_type. This removes the need for defining this enum type completely. Link: https://lore.kernel.org/r/20231122060406.14695-3-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-12-15PCI: epf-mhi: Fix the DMA data direction of dma_unmap_single()Manivannan Sadhasivam
In the error path of pci_epf_mhi_edma_write() function, the DMA data direction passed (DMA_FROM_DEVICE) doesn't match the actual direction used for the data transfer. Fix it by passing the correct one (DMA_TO_DEVICE). Fixes: 7b99aaaddabb ("PCI: epf-mhi: Add eDMA support") Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Link: https://lore.kernel.org/r/20231214063328.40657-1-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-12-14PCI: epf-mhi: Enable MHI async read/write supportManivannan Sadhasivam
Now that both eDMA and iATU are prepared to support async transfer, let's enable MHI async read/write by supplying the relevant callbacks. In the absence of eDMA, iATU will be used for both sync and async operations. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-12-14PCI: epf-mhi: Add support for DMA async read/write operationManivannan Sadhasivam
The driver currently supports only the sync read/write operation i.e., it waits for the DMA transfer to complete before returning to the caller (MHI stack). But it is sub-optimal and defeats the actual purpose of using DMA. So let's add support for DMA async read/write operation by skipping the DMA transfer completion and returning to the caller immediately. When the completion actually happens later, the driver will be notified using the DMA completion handler and in turn it will notify the caller using the newly introduced callback in "struct mhi_ep_buf_info". Since the DMA completion handler is invoked from the interrupt context, a separate workqueue (epf_mhi->dma_wq) is used to notify the caller about the completion of the transfer. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-12-14PCI: epf-mhi: Simulate async read/write using iATUManivannan Sadhasivam
Even though iATU only supports synchronous read/write, the MHI stack may call async read/write callbacks without knowing the limitations of the controller driver. So in order to maintain compatibility, let's simulate async read/write operation with iATU by invoking the completion callback after memcpy. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-12-14bus: mhi: ep: Rename read_from_host() and write_to_host() APIsManivannan Sadhasivam
In the preparation for adding async API support, let's rename the existing APIs to read_sync() and write_sync() to make it explicit that these APIs are used for synchronous read/write. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-12-14bus: mhi: ep: Pass mhi_ep_buf_info struct to read/write APIsManivannan Sadhasivam
In the preparation of DMA async support, let's pass the parameters to read_from_host() and write_to_host() APIs using mhi_ep_buf_info structure. No functional change. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-10-28Merge branch 'pci/misc'Bjorn Helgaas
- Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device so dwc3 can claim it instead (Vicki Pfau) - Make pci_assign_unassigned_resources() non-init because sparc uses it after init-time (Randy Dunlap) - Remove logic_outb(), _outw(), outl() duplicate declarations (John Sanpe) - Remove unnecessary UTF-8 in Kconfig help text that confuses menuconfig (Liu Song) - Fix double free in __pci_epc_create() (Dan Carpenter) - Simplify pcie_capability_clear_and_set_word() cases that could be pcie_capability_clear_word() (Ilpo Järvinen) * pci/misc: PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word() PCI: endpoint: Fix double free in __pci_epc_create() PCI: Replace unnecessary UTF-8 in Kconfig logic_pio: Remove logic_outb(), _outw(), outl() duplicate declarations PCI: Make pci_assign_unassigned_resources() non-init PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device
2023-10-26PCI: endpoint: Fix double free in __pci_epc_create()Dan Carpenter
The pci_epc_release() function frees "epc" so the kfree() on the next line is a double free. Drop the redundant free. Fixes: 7711cbb4862a ("PCI: endpoint: Fix WARN() when an endpoint driver is removed") Link: https://lore.kernel.org/r/2ce68694-87a7-4c06-b8a4-9870c891b580@moroto.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-10-05PCI: endpoint: Use IS_ERR_OR_NULL() helper functionRuan Jinjie
Use the IS_ERR_OR_NULL() helper instead of open-coding a NULL and an error pointer checks to simplify the code and improve readability. No functional changes are intended. [kwilczynski: commit log] Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-08-29Merge branch 'pci/misc'Bjorn Helgaas
- Reorder struct pci_dev to avoid holes and reduce size (Christophe JAILLET) - Change pdev->rom_attr_enabled to single bit since it's only a boolean value (Christophe JAILLET) - Use struct_size() in pirq_convert_irt_table() instead of hand-writing it (Christophe JAILLET) - Explicitly include correct DT includes to untangle headers (Rob Herring) - Fix a DOE race between destroy_work_on_stack() and the stack-allocated task->work struct going out of scope in pci_doe() (Ira Weiny) - Use pci_dev_id() when possible instead of manually composing ID from dev->bus->number and dev->devfn (Xiongfeng Wang, Zheng Zengkai) - Move pci_create_resource_files() declarations to linux/pci.h for alpha build warnings (Arnd Bergmann) - Remove unused hotplug function declarations (Yue Haibing) - Remove unused mvebu struct mvebu_pcie.busn (Pali Rohár) - Unexport pcie_port_bus_type (Bjorn Helgaas) - Remove unnecessary sysfs ID local variable initialization (Bjorn Helgaas) - Fix BAR value printk formatting to accommodate 32-bit values (Bjorn Helgaas) - Use consistent pointer types for config access syscall get_user() and put_user() uses (Bjorn Helgaas) - Simplify AER_RECOVER_RING_SIZE definition (Bjorn Helgaas) - Simplify pci_pio_to_address() (Bjorn Helgaas) - Simplify pci_dev_driver() (Bjorn Helgaas) - Fix pci_bus_resetable(), pci_slot_resetable() name typos (Bjorn Helgaas) - Fix code and doc typos and code formatting (Bjorn Helgaas) - Tidy config space save/restore messages (Bjorn Helgaas) * pci/misc: PCI: Tidy config space save/restore messages PCI: Fix code formatting inconsistencies PCI: Fix typos in docs and comments PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos PCI: Simplify pci_dev_driver() PCI: Simplify pci_pio_to_address() PCI/AER: Simplify AER_RECOVER_RING_SIZE definition PCI: Use consistent put_user() pointer types PCI: Fix printk field formatting PCI: Remove unnecessary initializations PCI: Unexport pcie_port_bus_type PCI: mvebu: Remove unused busn member PCI: Remove unused function declarations PCI/sysfs: Move declarations to linux/pci.h PCI/P2PDMA: Use pci_dev_id() to simplify the code PCI/IOV: Use pci_dev_id() to simplify the code PCI/AER: Use pci_dev_id() to simplify the code PCI: apple: Use pci_dev_id() to simplify the code PCI/DOE: Fix destroy_work_on_stack() race PCI: Explicitly include correct DT includes x86/PCI: Use struct_size() in pirq_convert_irt_table() PCI: Change pdev->rom_attr_enabled to single bit PCI: Reorder pci_dev fields to reduce holes
2023-08-26PCI: endpoint: Add kernel-doc for pci_epc_mem_init() APIManivannan Sadhasivam
Add missing kernel-doc for pci_epc_mem_init() API. Link: https://lore.kernel.org/linux-pci/20230717065459.14138-8-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
2023-08-26PCI: epf-mhi: Use iATU for small transfersManivannan Sadhasivam
For transfers below 4K, let's use iATU since using eDMA for such small transfers is inefficient. This is mainly because setting up an eDMA transfer and waiting for completion adds some latency. This latency is negligible for large transfers but not for the smaller ones. With using iATU, there is an increase in ~50Mbps throughput on both MHI UL (Uplink) and DL (Downlink) channels. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20230717065459.14138-7-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2023-08-26PCI: epf-mhi: Add support for SM8450Manivannan Sadhasivam
Add support for Qualcomm Snapdragon SM8450 SoC to the EPF driver. SM8450 has the dedicated PID (0x0306) and supports eDMA. Currently, it has no fixed PCI class, so it is being advertised as "PCI_CLASS_OTHERS". Link: https://lore.kernel.org/linux-pci/20230717065459.14138-6-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2023-08-26PCI: epf-mhi: Add eDMA supportManivannan Sadhasivam
Add support for Embedded DMA (eDMA) available in the DesignWare PCIe IP to transfer the MHI buffers between the host and the endpoint. The eDMA use helps achieve greater throughput as the transfers are offloaded from CPUs. For differentiating the iATU and eDMA APIs, the pci_epf_mhi_{read/write} APIs are renamed to pci_epf_mhi_iatu_{read/write} and separate eDMA specific APIs pci_epf_mhi_edma_{read/write} are introduced. Platforms that require eDMA support can pass the MHI_EPF_USE_DMA flag through pci_epf_mhi_ep_info. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20230717065459.14138-5-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2023-08-26PCI: epf-mhi: Make use of the alignment restriction from EPF coreManivannan Sadhasivam
Instead of hardcoding the alignment restriction in the EPF_MHI driver, make use of the info available from the EPF core that reflects the alignment restriction of the endpoint controller. For this purpose, let's introduce the get_align_offset() static function. [kwilczynski: update get_align_offset() to avoid issues on 32-bit architectures] Link: https://lore.kernel.org/linux-pci/20230717065459.14138-3-manivannan.sadhasivam@linaro.org Link: https://lore.kernel.org/linux-pci/20230826150626.23309-1-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2023-08-25PCI: Fix typos in docs and commentsBjorn Helgaas
Fix typos in docs and comments. Link: https://lore.kernel.org/r/20230824193712.542167-11-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-07-18PCI: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Link: https://lore.kernel.org/r/20230714174827.4061572-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-07-09Merge tag 'ntb-6.5' of https://github.com/jonmason/ntbLinus Torvalds
Pull NTB updates from Jon Mason: "Fixes for pci_clean_master, error handling in driver inits, and various other issues/bugs" * tag 'ntb-6.5' of https://github.com/jonmason/ntb: ntb: hw: amd: Fix debugfs_create_dir error checking ntb.rst: Fix copy and paste error ntb_netdev: Fix module_init problem ntb: intel: Remove redundant pci_clear_master ntb: epf: Remove redundant pci_clear_master ntb_hw_amd: Remove redundant pci_clear_master ntb: idt: drop redundant pci_enable_pcie_error_reporting() MAINTAINERS: git://github -> https://github.com for jonmason NTB: EPF: fix possible memory leak in pci_vntb_probe() NTB: ntb_tool: Add check for devm_kcalloc NTB: ntb_transport: fix possible memory leak while device_register() fails ntb: intel: Fix error handling in intel_ntb_pci_driver_init() NTB: amd: Fix error handling in amd_ntb_pci_driver_init() ntb: idt: Fix error handling in idt_pci_driver_init()
2023-07-08NTB: EPF: fix possible memory leak in pci_vntb_probe()ruanjinjie
As ntb_register_device() don't handle error of device_register(), if ntb_register_device() returns error in pci_vntb_probe(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked. As comment of device_add() says, it should call put_device() to drop the reference count that was set in device_initialize() when it fails, so the name can be freed in kobject_cleanup(). Signed-off-by: ruanjinjie <ruanjinjie@huawei.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2023-06-23PCI: endpoint: pci-epf-vntb: Fix typo in commentsFrank Li
Replace "Span" with "Spad". Link: https://lore.kernel.org/r/20221214172254.668282-1-Frank.Li@nxp.com Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: endpoint: Add PCI Endpoint function driver for MHI busManivannan Sadhasivam
Add PCI Endpoint driver for the Qualcomm MHI (Modem Host Interface) bus. The driver implements the MHI function over PCI in the endpoint device such as SDX55 modem. The MHI endpoint function driver acts as a controller driver for the MHI Endpoint stack and carries out all PCI related functionality. Link: https://lore.kernel.org/r/20230602114756.36586-9-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
2023-06-23PCI: endpoint: Add BME notifier supportManivannan Sadhasivam
Add support to notify the EPF device about the Bus Master Enable (BME) event received by the EPC device from the Root complex. Link: https://lore.kernel.org/r/20230602114756.36586-6-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
2023-06-23PCI: endpoint: Add linkdown notifier supportManivannan Sadhasivam
Add support to notify the EPF device about the linkdown event from the EPC device. Link: https://lore.kernel.org/r/20230602114756.36586-5-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
2023-06-23PCI: endpoint: Return error if EPC is started/stopped multiple timesManivannan Sadhasivam
When the EPC is started or stopped multiple times from configfs, just return -EALREADY. There is no need to call the EPC start/stop functions in those cases. Link: https://lore.kernel.org/r/20230602114756.36586-4-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
2023-06-23PCI: endpoint: Pass EPF device ID to the probe functionManivannan Sadhasivam
Currently, the EPF probe function doesn't get the device ID argument needed to correctly identify the device table ID of the EPF device. When multiple entries are added to the "struct pci_epf_device_id" table, the probe function needs to identify the correct one. This is achieved by modifying the pci_epf_match_id() function to return the match ID pointer and passing it to the driver's probe function. pci_epf_device_match() function can return bool based on the return value of pci_epf_match_id(). Link: https://lore.kernel.org/r/20230602114756.36586-3-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kishon Vijay Abraham I <kishon@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
2023-06-23PCI: endpoint: Add missing documentation about the MSI/MSI-X rangeManivannan Sadhasivam
Both pci_epc_raise_irq() and pci_epc_map_msi_irq() APIs expect the MSI/MSI-X vectors to start from 1 but it is not documented. Add the range info to the kdoc of the APIs to make it clear. Link: https://lore.kernel.org/r/20230602114756.36586-2-manivannan.sadhasivam@linaro.org Fixes: 5e8cb4033807 ("PCI: endpoint: Add EP core layer to enable EP controller and EP functions") Fixes: 87d5972e476f ("PCI: endpoint: Add pci_epc_ops to map MSI IRQ") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
2023-06-23PCI: endpoint: Improve pci_epf_type_add_cfs()Damien Le Moal
pci_epf_type_add_cfs() should not be called with an unbound EPF device, that is, an epf device with epf->driver not set. For such case, replace the NULL return in pci_epf_type_add_cfs() with a clear ERR_PTR(-ENODEV) pointer error return. Link: https://lore.kernel.org/r/20230515074348.595704-2-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivami <manivannan.sadhasivam@linaro.org>
2023-06-23PCI: endpoint: functions/pci-epf-test: Fix dma_chan directionYoshihiro Shimoda
In pci_epf_test_init_dma_chan() epf_test->dma_chan_rx is assigned from dma_request_channel() with DMA_DEV_TO_MEM as filter.dma_mask. However, in pci_epf_test_data_transfer() if the dir is DMA_DEV_TO_MEM, epf->dma_chan_rx should be used but instead we are using epf_test->dma_chan_tx. Fix it. Link: https://lore.kernel.org/r/20230412063447.2841177-1-yoshihiro.shimoda.uh@renesas.com Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities") Tested-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com>
2023-06-23PCI: epf-test: Simplify transfers result printDamien Le Moal
In pci_epf_test_print_rate(), instead of open coding a reduction loop to allow for a division by a 32-bits ns value, simply use div64_u64() to calculate the transfer rate. To match the printed unit of KB/s, this calculation divides the rate by 1000 instead of 1024 (that would be KiB/s unit). Change the format of the results printed by pci_epf_test_print_rate() to be more compact without the double new line. Also use dev_info() instead of pr_info(). Link: https://lore.kernel.org/r/20230415023542.77601-14-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Simplify DMA support checksDamien Le Moal
There is no need to have each read, write and copy test functions check for the FLAG_USE_DMA flag against the DMA support status indicated by epf_test->dma_supported. Move this test to the command handler function pci_epf_test_cmd_handler() to check once for all cases. Link: https://lore.kernel.org/r/20230415023542.77601-13-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Cleanup request result handlingDamien Le Moal
Each of the test functions pci_epf_test_write(), pci_epf_test_read() and pci_epf_test_copy() return an int result which is used by pci_epf_test_cmd_handler() to set a success or error bit in the request status. In the spirit of keeping the processing of each test case self-contained within its own test function, move the request status field update from pci_epf_test_cmd_handler() to each of these test functions and change these functions declaration to returning void. Link: https://lore.kernel.org/r/20230415023542.77601-12-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Cleanup pci_epf_test_cmd_handler()Damien Le Moal
Command codes are never combined together as flags into a single value. Thus we can replace the series of "if" tests in pci_epf_test_cmd_handler() with a cleaner switch-case statement. This also allows checking that we got a valid command and print an error message if we did not. Link: https://lore.kernel.org/r/20230415023542.77601-11-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Improve handling of command and status registersDamien Le Moal
The pci-epf-test driver uses the test register BAR memory directly to get and execute a test registers set by the RC side and defined using a struct pci_epf_test_reg. This direct use relies on using the register BAR address as a pointer to a struct pci_epf_test_reg to execute the test case and to send back the test result through the status field of struct pci_epf_test_reg. In practice, the status field is always updated before an interrupt is raised in pci_epf_test_raise_irq(), to ensure that the RC side sees the updated status when receiving an interrupt. However, such assignment direct access does not ensure that changes to the status register make it to memory, and so visible to the host, before an interrupt is raised, thus potentially resulting in the RC host not seeing the correct status result for a test. Avoid this potential problem by using READ_ONCE()/WRITE_ONCE() when accessing the command and status fields of a pci_epf_test_reg structure. This ensure that a test start (pci_epf_test_cmd_handler() function) and completion (with the function pci_epf_test_raise_irq()) achieve a correct synchronization with the MMIO register accesses on the RC host. Link: https://lore.kernel.org/r/20230415023542.77601-10-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Simplify IRQ test commands executionDamien Le Moal
For the commands COMMAND_RAISE_LEGACY_IRQ, COMMAND_RAISE_MSI_IRQ and COMMAND_RAISE_MSIX_IRQ, the function pci_epf_test_cmd_handler() sets the STATUS_IRQ_RAISED status flag and calls the epc function pci_epc_raise_irq() directly. However, this is also exactly what the pci_epf_test_raise_irq() function does. Avoid duplicating these operations by directly using pci_epf_test_raise_irq() for the IRQ test commands. It is OK to do so as the host side endpoint test driver always set the correct IRQ type for the IRQ test commands. At the same time, move the IRQ number check done for the COMMAND_RAISE_MSI_IRQ and COMMAND_RAISE_MSIX_IRQ commands to pci_epf_test_raise_irq(), to also check the IRQ number requested by the host for other test commands. This significantly simplifies pci_epf_test_cmd_handler(). Link: https://lore.kernel.org/r/20230415023542.77601-9-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Simplify pci_epf_test_raise_irq()Damien Le Moal
Change the interface of the function pci_epf_test_raise_irq() to directly pass a pointer to the struct pci_epf_test_reg defining the test being executed. This avoids the need for grabbing this pointer using the register BAR address and simplifies the call sites as the IRQ type and IRQ numbers do not have to be passed as arguments. Link: https://lore.kernel.org/r/20230415023542.77601-8-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Simplify read/write/copy test functionsDamien Le Moal
The function pci_epf_test_cmd_handler() uses the register BAR address as a pointer to a struct pci_epf_test_reg to determine the command sent by the host and to execute the test function accordingly. There is no need for doing this assignment again in each of the read, write and copy test functions. We can simply pass the reg pointer as an argument to the functions pci_epf_test_write(), pci_epf_test_read() and pci_epf_test_copy(). Link: https://lore.kernel.org/r/20230415023542.77601-7-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Use dmaengine_submit() to initiate DMA transferDamien Le Moal
Instead of an open coded call to the tx_submit() operation of struct dma_async_tx_descriptor, use the helper function dmaengine_submit(). No functional change is introduced with this. Link: https://lore.kernel.org/r/20230415023542.77601-6-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: epf-test: Fix DMA transfer completion detectionDamien Le Moal
pci_epf_test_data_transfer() and pci_epf_test_dma_callback() are not handling DMA transfer completion correctly, leading to completion notifications to the RC side that are too early. This problem can be detected when the RC side is running an IOMMU with messages such as: pci-endpoint-test 0000:0b:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x001c address=0xfff00000 flags=0x0000] When running the pcitest.sh tests: the address used for a previous test transfer generates the above error while the next test transfer is running. Fix this by testing the DMA transfer status in pci_epf_test_dma_callback() and notifying the completion only when the transfer status is DMA_COMPLETE or DMA_ERROR. Furthermore, in pci_epf_test_data_transfer(), be paranoid and check again the transfer status and always call dmaengine_terminate_sync() before returning. Link: https://lore.kernel.org/r/20230415023542.77601-5-dlemoal@kernel.org Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org
2023-06-23PCI: epf-test: Fix DMA transfer completion initializationDamien Le Moal
Reinitialize the transfer_complete DMA transfer completion before calling tx_submit(), to avoid seeing the DMA transfer complete before the completion is initialized, thus potentially losing the completion notification. Link: https://lore.kernel.org/r/20230415023542.77601-4-dlemoal@kernel.org Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org
2023-06-23PCI: endpoint: Move pci_epf_type_add_cfs() codeDamien Le Moal
pci_epf_type_add_cfs() is called only from pci_ep_cfs_add_type_group() in drivers/pci/endpoint/pci-ep-cfs.c, so there is no need to export this function. Move its code from pci-epf-core.c to pci-ep-cfs.c as a static function. Link: https://lore.kernel.org/r/20230415023542.77601-3-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
2023-06-23PCI: endpoint: Automatically create a function specific attributes groupDamien Le Moal
A PCI endpoint function driver can define function specific attributes under its function configfs directory using the add_cfs() endpoint driver operation. This is done by tying up the mkdir operation for the function configfs directory to a call to the add_cfs() operation. However, there are no checks preventing the user from repeatedly creating function specific attribute directories with different names, resulting in the same endpoint specific attributes group being added multiple times, which also result in an invalid reference counting for the attribute groups. E.g., using the pci-epf-ntb function driver as an example, the user creates the function as follows: $ modprobe pci-epf-ntb $ cd /sys/kernel/config/pci_ep/functions/pci_epf_ntb $ mkdir func0 $ tree func0 func0/ |-- baseclass_code |-- cache_line_size |-- ... `-- vendorid $ mkdir func0/attrs $ tree func0 func0/ |-- attrs | |-- db_count | |-- mw1 | |-- mw2 | |-- mw3 | |-- mw4 | |-- num_mws | `-- spad_count |-- baseclass_code |-- cache_line_size |-- ... `-- vendorid At this point, the function can be started by linking the EP controller. However, if the user mistakenly creates again a directory: $ mkdir func0/attrs2 $ tree func0 func0/ |-- attrs | |-- db_count | |-- mw1 | |-- mw2 | |-- mw3 | |-- mw4 | |-- num_mws | `-- spad_count |-- attrs2 | |-- db_count | |-- mw1 | |-- mw2 | |-- mw3 | |-- mw4 | |-- num_mws | `-- spad_count |-- baseclass_code |-- cache_line_size |-- ... `-- vendorid The endpoint function specific attributes are duplicated and cause a crash when the endpoint function device is torn down: refcount_t: addition on 0; use-after-free. WARNING: CPU: 2 PID: 834 at lib/refcount.c:25 refcount_warn_saturate+0xc8/0x144 CPU: 2 PID: 834 Comm: rmdir Not tainted 6.3.0-rc1 #1 Hardware name: Pine64 RockPro64 v2.1 (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) ... Call trace: refcount_warn_saturate+0xc8/0x144 config_item_get+0x7c/0x80 configfs_rmdir+0x17c/0x30c vfs_rmdir+0x8c/0x204 do_rmdir+0x158/0x184 __arm64_sys_unlinkat+0x64/0x80 invoke_syscall+0x48/0x114 ... Fix this by modifying pci_epf_cfs_work() to execute the new function pci_ep_cfs_add_type_group() which itself calls pci_epf_type_add_cfs() to obtain the function specific attribute group and the group name (directory name) from the endpoint function driver. If the function driver defines an attribute group, pci_ep_cfs_add_type_group() then proceeds to register this group using configfs_register_group(), thus automatically exposing the function type specific configfs attributes to the user. E.g.: $ modprobe pci-epf-ntb $ cd /sys/kernel/config/pci_ep/functions/pci_epf_ntb $ mkdir func0 $ tree func0 func0/ |-- baseclass_code |-- cache_line_size |-- ... |-- pci_epf_ntb.0 | |-- db_count | |-- mw1 | |-- mw2 | |-- mw3 | |-- mw4 | |-- num_mws | `-- spad_count |-- primary |-- ... `-- vendorid With this change, there is no need for the user to create or delete directories in the endpoint function attributes directory. The pci_epf_type_group_ops group operations are thus removed. Also update the documentation for the pci-epf-ntb and pci-epf-vntb function drivers to reflect this change, removing the explanations showing the need to manually create the sub-directory for the function specific attributes. Link: https://lore.kernel.org/r/20230415023542.77601-2-dlemoal@kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
generated by cgit (git 2.34.1) at 2024-05-28 19:00:45 +0000