| Age | Commit message (Collapse) | Author |
|---|
|
- Use sysfs_emit() in "show" functions instead of sprintf() to avoid buffer
overruns (Kunihiko Hayashi)
* remotes/lorenzo/pci/endpoint:
PCI: endpoint: Use sysfs_emit() in "show" functions
|
|
- Tidy setup-irq.c comments (Pranay Sanghai)
- Fix misspellings (Krzysztof Wilczyński)
- Fix sprintf(), sscanf() format mismatches (Krzysztof Wilczyński)
- Tidy cpqphp code formatting (Krzysztof Wilczyński)
- Remove unused pci_pool wrappers, which have been replaced by dma_pool
(Cai Huoqing)
- Remove a redundant initialization in __pci_reset_function_locked() (Colin
Ian King)
- Use 'unsigned int' instead of 'unsigned' (Krzysztof Wilczyński)
- Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński)
- Include generic <linux/> headers instead of <asm/> for cpqphp and vmd
(Krzysztof Wilczyński)
* pci/misc:
PCI: vmd: Drop redundant includes of <asm/device.h>, <asm/msi.h>
PCI: cpqphp: Use <linux/io.h> instead of <asm/io.h>
MAINTAINERS: Update PCI subsystem information
PCI: Prefer 'unsigned int' over bare 'unsigned'
PCI: Remove redundant 'rc' initialization
PCI: Remove unused pci_pool wrappers
PCI: cpqphp: Format if-statement code block correctly
PCI: Use unsigned to match sscanf("%x") in pci_dev_str_match_path()
PCI: hv: Remove unnecessary use of %hx
PCI: Correct misspelled and remove duplicated words
PCI: Tidy comments
|
|
Correct a number of misspelled words and remove any words that were
duplicated in the PCI tree. No change to functionality intended.
Link: https://lore.kernel.org/r/20211006233827.147328-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Convert sprintf() in sysfs "show" functions to sysfs_emit() in order to
check for buffer overruns in sysfs outputs.
Link: https://lore.kernel.org/r/1630472957-26857-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
|
|
Most of the "store" functions that handle userspace input via sysfs return
-EINVAL should the value fail validation and/or type conversion. This
error code is a clear message to userspace that the value is not a valid
input.
However, some of the "show" functions return input parsing error codes
as-is, which may be either -EINVAL or -ERANGE. The former would often be
from kstrtobool(), and the latter typically from other kstr*() functions
such as kstrtou8(), kstrtou32(), kstrtoint(), etc.
-EINVAL is commonly returned as the error code to indicate that the value
provided is invalid, but -ERANGE is not very useful in userspace.
Therefore, normalize the return error code to be -EINVAL for when the
validation and/or type conversion fails.
Link: https://lore.kernel.org/r/20210915230127.2495723-2-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Convert controller drivers to generic_handle_domain_irq() (Marc
Zyngier)
- Simplify VPD (Vital Product Data) access and search (Heiner
Kallweit)
- Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use
simplified VPD interfaces (Heiner Kallweit)
- Run Max Payload Size quirks before configuring MPS; work around
ASMedia ASM1062 SATA MPS issue (Marek Behún)
Resource management:
- Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof
Wilczyński)
- Optimize pci_resource_len() to reduce kernel size (Zhen Lei)
PCI device hotplug:
- Fix a double unmap in ibmphp (Vishal Aslot)
PCIe port driver:
- Enable Bandwidth Notification only if port supports it (Stuart
Hayes)
Sysfs/proc/syscalls:
- Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński)
- Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof
Wilczyński)
- Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński)
Virtualization:
- Extend "pci=noats" to also turn on Translation Blocking to protect
against some DMA attacks (Alex Williamson)
- Add sysfs mechanism to control the type of reset used between
device assignments to VMs (Amey Narkhede)
- Add support for ACPI _RST reset method (Shanker Donthineni)
- Add ACS quirks for Cavium multi-function devices (George Cherian)
- Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan)
- Allow HiSilicon AMBA devices that appear as fake PCI devices to use
PASID and SVA (Zhangfei Gao)
Endpoint framework:
- Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I)
- Zero-initialize endpoint test tool parameters so we don't use
random parameters (Shunyong Yang)
APM X-Gene PCIe controller driver:
- Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang)
Broadcom iProc PCIe controller driver:
- Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because
it's optional on BCMA devices (Rob Herring)
- Fix BCMA probe resource handling (Rob Herring)
Cadence PCIe driver:
- Work around J7200 Link training electrical issue by increasing
delays in LTSSM (Nadeem Athani)
Intel IXP4xx PCI controller driver:
- Depend on ARCH_IXP4XX to avoid useless config questions (Geert
Uytterhoeven)
Intel Keembay PCIe controller driver:
- Add Intel Keem Bay PCIe controller (Srikanth Thokala)
Marvell Aardvark PCIe controller driver:
- Work around config space completion handling issues (Evan Wang)
- Increase timeout for config access completions (Pali Rohár)
- Emulate CRS Software Visibility bit (Pali Rohár)
- Configure resources from DT 'ranges' property to fix I/O space
access (Pali Rohár)
- Serialize INTx mask/unmask (Pali Rohár)
MediaTek PCIe controller driver:
- Add MT7629 support in DT (Chuanjia Liu)
- Fix an MSI issue (Chuanjia Liu)
- Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number
("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if
present (Chuanjia Liu)
Microsoft Hyper-V host bridge driver:
- Add ARM64 support (Boqun Feng)
- Support "Create Interrupt v3" message (Sunil Muthuswamy)
NVIDIA Tegra PCIe controller driver:
- Use seq_puts(), move err_msg from stack to static, fix OF node leak
(Christophe JAILLET)
NVIDIA Tegra194 PCIe driver:
- Disable suspend when in Endpoint mode (Om Prakash Singh)
- Fix MSI-X address programming error (Om Prakash Singh)
- Disable interrupts during suspend to avoid spurious AER link down
(Om Prakash Singh)
Renesas R-Car PCIe controller driver:
- Work around hardware issue that prevents Link L1->L0 transition
(Marek Vasut)
- Fix runtime PM refcount leak (Dinghao Liu)
Rockchip DesignWare PCIe controller driver:
- Add Rockchip RK356X host controller driver (Simon Xue)
TI J721E PCIe driver:
- Add support for J7200 and AM64 (Kishon Vijay Abraham I)
Toshiba Visconti PCIe controller driver:
- Add Toshiba Visconti PCIe host controller driver (Nobuhiro
Iwamatsu)
Xilinx NWL PCIe controller driver:
- Enable PCIe reference clock via CCF (Hyun Kwon)
Miscellaneous:
- Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET)
- Fix pci_dev_str_match_path() alloc while atomic bug (used for
kernel parameters that specify devices) (Dan Carpenter)
- Remove pointless Precision Time Management warning when PTM is
present but not enabled (Jakub Kicinski)
- Remove surplus "break" statements (Krzysztof Wilczyński)"
* tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits)
PCI: ibmphp: Fix double unmap of io_mem
x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API
PCI/VPD: Use unaligned access helpers
PCI/VPD: Clean up public VPD defines and inline functions
cxgb4: Use pci_vpd_find_id_string() to find VPD ID string
PCI/VPD: Add pci_vpd_find_id_string()
PCI/VPD: Include post-processing in pci_vpd_find_tag()
PCI/VPD: Stop exporting pci_vpd_find_info_keyword()
PCI/VPD: Stop exporting pci_vpd_find_tag()
PCI: Set dma-can-stall for HiSilicon chips
PCI: rockchip-dwc: Add Rockchip RK356X host controller driver
PCI: dwc: Remove surplus break statement after return
PCI: artpec6: Remove local code block from switch statement
PCI: artpec6: Remove surplus break statement after return
MAINTAINERS: Add entries for Toshiba Visconti PCIe controller
PCI: visconti: Add Toshiba Visconti PCIe host controller driver
PCI/portdrv: Enable Bandwidth Notification only if port supports it
PCI: Allow PASID on fake PCIe devices without TLP prefixes
PCI: mediatek: Use PCI domain to handle ports detection
PCI: mediatek: Add new method to get irq number
...
|
|
Add virtual function number in pci_epc ops. EPC controller driver
can perform virtual function specific initialization based on the
virtual function number.
Link: https://lore.kernel.org/r/20210819123343.1951-5-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
While the physical function has to be linked to endpoint controller, the
virtual function has to be linked to a physical function. Add support to
link a physical function to a virtual function in pci-ep-cfs.
Link: https://lore.kernel.org/r/20210819123343.1951-4-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Add support to add virtual function in endpoint core. The virtual
function can only be associated with a physical function instead of a
endpoint controller. Provide APIs to associate a virtual function with
a physical function here.
[weiyongjun1@huawei.com: PCI: endpoint: Fix missing unlock on error in
pci_epf_add_vepf() - Reported-by: Hulk Robot <hulkci@huawei.com>]
Link: https://lore.kernel.org/r/20210819123343.1951-3-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver core ignores the return value of pci_epf_device_remove()
(because there is only little it can do when a device disappears) and
there are no pci_epf_drivers with a remove callback.
So make it impossible for future drivers to return an unused error code
by changing the remove prototype to return void.
The real motivation for this change is the quest to make struct
bus_type::remove return void, too.
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- Fix NULL pointer dereference when epc_features not implemented (Shradha
Todi)
- Remove redundant initialization (Colin Ian King)
- Add missing destroy_workqueue() in endpoint test (Yang Yingliang)
* remotes/lorenzo/pci/endpoint:
PCI: endpoint: Fix missing destroy_workqueue()
PCI: endpoint: Remove redundant initialization of pointer dev
PCI: endpoint: Fix NULL pointer dereference for ->get_features()
|
|
Add the missing destroy_workqueue() before return from
pci_epf_test_init() in the error handling case and add
destroy_workqueue() in pci_epf_test_exit().
Link: https://lore.kernel.org/r/20210331084012.2091010-1-yangyingliang@huawei.com
Fixes: 349e7a85b25fa ("PCI: endpoint: functions: Add an EP function to test PCI")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
The pointer dev is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Link: https://lore.kernel.org/r/20210326190909.622369-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
|
|
get_features ops of pci_epc_ops may return NULL, causing NULL pointer
dereference in pci_epf_test_alloc_space function. Let us add a check for
pci_epc_feature pointer in pci_epf_test_bind before we access it to avoid
any such NULL pointer dereference and return -ENOTSUPP in case
pci_epc_feature is not found.
When the patch is not applied and EPC features is not implemented in the
platform driver, we see the following dump due to kernel NULL pointer
dereference.
Call trace:
pci_epf_test_bind+0xf4/0x388
pci_epf_bind+0x3c/0x80
pci_epc_epf_link+0xa8/0xcc
configfs_symlink+0x1a4/0x48c
vfs_symlink+0x104/0x184
do_symlinkat+0x80/0xd4
__arm64_sys_symlinkat+0x1c/0x24
el0_svc_common.constprop.3+0xb8/0x170
el0_svc_handler+0x70/0x88
el0_svc+0x8/0x640
Code: d2800581 b9403ab9 f9404ebb 8b394f60 (f9400400)
---[ end trace a438e3c5a24f9df0 ]---
Link: https://lore.kernel.org/r/20210324101609.79278-1-shradha.t@samsung.com
Fixes: 2c04c5b8eef79 ("PCI: pci-epf-test: Use pci_epc_get_features() to get EPC features")
Signed-off-by: Sriram Dash <dash.sriram@gmail.com>
Signed-off-by: Shradha Todi <shradha.t@samsung.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Fix kernel-doc formatting errors, function names that don't match the doc,
and some missing parameter documentation. These are reported by:
make W=1 drivers/pci/
No functional change intended.
[bhelgaas: squashed into one patch since this only changes comments]
Link: https://lore.kernel.org/r/20210311001724.423356-1-kw@linux.com
Link: https://lore.kernel.org/r/20210311001724.423356-2-kw@linux.com
Link: https://lore.kernel.org/r/20210311001724.423356-3-kw@linux.com
Link: https://lore.kernel.org/r/20210311001724.423356-4-kw@linux.com
Link: https://lore.kernel.org/r/20210311001724.423356-5-kw@linux.com
Link: https://lore.kernel.org/r/20210311001724.423356-6-kw@linux.com
Link: https://lore.kernel.org/r/20210311001724.423356-7-kw@linux.com
Link: https://lore.kernel.org/r/20210311001724.423356-8-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add a new endpoint function driver to provide NTB functionality using
multiple PCIe endpoint instances.
[arnd@arndb.de: Select configfs dependency]
[yebin10@huawei.com: Fix unused but set variables]
[geert+renesas@glider.be: Explain NTB in PCI_EPF_NTB help text]
Link: https://lore.kernel.org/r/20210201195809.7342-14-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Documentation/PCI/endpoint/pci-endpoint-cfs.rst explains how a user has to
create a directory in-order to create a 'EPF Device' that can be
configured/probed by 'EPF Driver'.
Allow user to create a sub-directory of 'EPF Device' directory for any
function specific attributes that has to be exposed to the user.
Link: https://lore.kernel.org/r/20210201195809.7342-11-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
In addition to the attributes that are generic across function drivers
documented in Documentation/PCI/endpoint/pci-endpoint-cfs.rst, there could
be function-specific attributes that has to be exposed by the function
driver to be configured by the user. Add ->add_cfs() in pci_epf_ops to be
populated by the function driver if it has to expose any function-specific
attributes and pci_epf_type_add_cfs() to be invoked by pci-ep-cfs.c when
sub-directory to main function directory is created.
Link: https://lore.kernel.org/r/20210201195809.7342-10-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add pci_epc_ops to map physical address to MSI address and return MSI data.
The physical address is an address in the outbound region. This is required
to implement doorbell functionality of NTB (non-transparent bridge) wherein
EPC on either side of the interface (primary and secondary) can directly
write to the physical address (in outbound region) of the other interface
to ring doorbell using MSI.
Link: https://lore.kernel.org/r/20210201195809.7342-9-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Now that PCI endpoint core supports to add secondary endpoint controller
(EPC) with endpoint function (EPF), Add support in configfs to associate
two EPCs with EPF. This creates "primary" and "secondary" directory inside
the directory created by users for EPF device. Users have to add a symlink
of endpoint controller (pci_ep/controllers/) to "primary" or "secondary"
directory to bind EPF to primary and secondary EPF interfaces respectively.
Existing method of linking directory representing EPF device to directory
representing EPC device to associate a single EPC device with a EPF device
will continue to work.
Link: https://lore.kernel.org/r/20210201195809.7342-8-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
In the case of standard endpoint functions, only one endpoint controller
(EPC) will be associated with an endpoint function (EPF). However for
providing NTB (non transparent bridge) functionality, two EPCs should be
associated with a single EPF. Add support to associate secondary EPC with
EPF. This is in preparation for adding NTB endpoint function driver.
Link: https://lore.kernel.org/r/20210201195809.7342-7-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Remove unused pci_epf_match_device() function added in pci-epf-core.c
Link: https://lore.kernel.org/r/20210201195809.7342-6-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Modify pci_epc_get_next_free_bar() and pci_epc_get_first_free_bar() to
return error values if there are no free BARs available.
Link: https://lore.kernel.org/r/20210201195809.7342-5-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Add an API to get the next unreserved BAR starting from a given BAR number
that can be used by the endpoint function.
Link: https://lore.kernel.org/r/20210201195809.7342-4-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
pci_epc_get_first_free_bar() uses only "reserved_bar" member in
epc_features to get the first unreserved BAR. However if the reserved BAR
is also a 64-bit BAR, then the next BAR shouldn't be returned (since 64-bit
BAR uses two BARs).
Make pci_epc_get_first_free_bar() take into account 64 bit BAR while
returning the first free unreserved BAR.
Link: https://lore.kernel.org/r/20210201195809.7342-3-kishon@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Fix kerneldoc warnings, e.g.,
$ make W=1 drivers/pci/
drivers/pci/ats.c:196: warning: Function parameter or member 'pdev' not described in 'pci_enable_pri'
drivers/pci/ats.c:196: warning: Function parameter or member 'reqs' not described in 'pci_enable_pri'
...
Link: https://lore.kernel.org/r/20200729201224.26799-2-krzk@kernel.org
Link: https://lore.kernel.org/r/20200729201224.26799-3-krzk@kernel.org
Link: https://lore.kernel.org/r/20200729201224.26799-4-krzk@kernel.org
Link: https://lore.kernel.org/r/20200729201224.26799-5-krzk@kernel.org
Link: https://lore.kernel.org/r/20200729201224.26799-6-krzk@kernel.org
Link: https://lore.kernel.org/r/20200729201224.26799-7-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
- Fix rcar OB window programming (Andrew Murray)
- Add rcar suspend/resume support (Kazufumi Ikeda)
- Add r8a77961 to DT binding (Yoshihiro Shimoda)
- Rename pcie-rcar.c to pcie-rcar-host.c to make room for endpoint mode
(Lad Prabhakar)
- Move shareable code to pcie-rcar.c (Lad Prabhakar)
- Correct PCIEPAMR mask calculation for "size < 128" (Lad Prabhakar)
- Add endpoint support for multiple outbound memory windows (Lad
Prabhakar)
- Add R-Car PCIe endpoint driver and DT bindings (Lad Prabhakar)
* remotes/lorenzo/pci/rcar:
MAINTAINERS: Add file patterns for rcar PCI device tree bindings
PCI: rcar: Add endpoint mode support
dt-bindings: PCI: rcar: Add bindings for R-Car PCIe endpoint controller
PCI: endpoint: Add support to handle multiple base for mapping outbound memory
PCI: endpoint: Pass page size as argument to pci_epc_mem_init()
PCI: rcar: Fix calculating mask for PCIEPAMR register
PCI: rcar: Move shareable code to a common file
PCI: rcar: Rename pcie-rcar.c to pcie-rcar-host.c
dt-bindings: pci: rcar: add r8a77961 support
PCI: rcar: Add suspend/resume
PCI: rcar: Fix incorrect programming of OB windows
|
|
R-Car PCIe controller has support to map multiple memory regions for
mapping the outbound memory in local system also the controller limits
single allocation for each region (that is, once a chunk is used from the
region it cannot be used to allocate a new one). This features inspires to
add support for handling multiple memory bases in endpoint framework.
With this patch pci_epc_mem_init() initializes address space for endpoint
controller which support single window and pci_epc_multi_mem_init()
initializes multiple windows supported by endpoint controller.
Link: https://lore.kernel.org/r/1588854799-13710-6-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
pci_epc_mem_init() internally used page size equal to *PAGE_SIZE* to
manage the address space so instead just pass the page size as a
argument to pci_epc_mem_init().
Also make pci_epc_mem_init() as a C function instead of a macro function
in preparation for adding support for pci-epc-mem core to handle multiple
windows.
Link: https://lore.kernel.org/r/1588854799-13710-5-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
When unbinding pci_epf_test, pci_epf_test_clean_dma_chan() is called in
pci_epf_test_unbind() even though epf_test->dma_supported is false.
As a result, dma_release_channel() will trigger a NULL pointer
dereference because dma_chan is not set.
Avoid calling dma_release_channel() if epf_test->dma_supported
is false.
Link: https://lore.kernel.org/r/1587540287-10458-1-git-send-email-hayashi.kunihiko@socionext.com
Fixes: 5ebf3fc59bd2 ("PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
commit beb4641a787d ("PCI: dwc: Add MSI-X callbacks handler"),
in order to raise MSI-X interrupt, obtained MSIX table address from
Base Address Register (BAR). However BAR only holds PCI address
programmed by the host whereas the MSI-X table should be in the local
memory.
Store the MSI-X table address (virtual address) as part of ->set_bar()
callback and use that to get the message address and message data
here.
Fixes: beb4641a787d ("PCI: dwc: Add MSI-X callbacks handler")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
commit 8963106eabdc ("PCI: endpoint: Add MSI-X interfaces") while
adding support to raise MSI-X interrupts from endpoint didn't include
BAR Indicator register (BIR) configuration and MSI-X table offset as
arguments in pci_epc_set_msix(). This would result in endpoint
controller register using random BAR indicator register, the memory
for which might not be allocated by the endpoint function driver.
Add BAR indicator register and MSI-X table offset as arguments in
pci_epc_set_msix() and allocate space for MSI-X table and pending
bit array (PBA) in pci-epf-test endpoint function driver.
Fixes: 8963106eabdc ("PCI: endpoint: Add MSI-X interfaces")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Print throughput information in KB/s after every completed transfer,
including information on whether DMA is used or not.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Alan Mikhak <alan.mikhak@sifive.com>
|
|
Use dmaengine API and add support for transferring data using DMA.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Alan Mikhak <alan.mikhak@sifive.com>
|
|
After an endpoint is started through configfs, if 0 is written to the
configfs entry 'start', the controller stops but the epc_group->start
value remains 1.
A subsequent unlinking of the function from the controller would trigger
a spurious WARN_ON_ONCE() in pci_epc_epf_unlink() despite right
behavior.
Fix it by setting epc_group->start = 0 when a controller is stopped
using configfs.
Fixes: d74679911610 ("PCI: endpoint: Introduce configfs entry for configuring EP functions")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Add support to defer core initialization for the endpoint mode of
operation.
This would enable support for implementations where the core
initialization needs to be deferred until the PCIe reference clock is
available from the host system.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Add support to send notifications to EPF from EPC once the core
registers initialization is complete.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
The PCIe endpoint core relies on the drivers that invoke the
pci_epc_add_epf() API to allocate and assign a function number
to each physical function (PF). Since endpoint function device can
be created by multiple mechanisms (configfs, devicetree, etc..),
allowing each of these mechanisms to assign a function number
would result in mutliple endpoint function devices having the
same function number. In order to avoid this, let EPC core assign
a function number to the endpoint device.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Protect concurrent access to pci_epf_ops with a mutex.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
pci-epc-mem uses a bitmap to manage the Endpoint outbound (OB) address
region. This address region will be shared by multiple endpoint
functions (in the case of multi function endpoint) and it has to be
protected from concurrent access to avoid updating an inconsistent state.
Use a mutex to protect bitmap updates to prevent the memory
allocation API from returning incorrect addresses.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # v4.14+
|
|
The pci_epc_ops is not intended to be invoked from interrupt context.
Hence replace spin_lock_irqsave and spin_unlock_irqrestore with
mutex_lock and mutex_unlock respectively.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
Use atomic_notifier_call_chain() to notify EPC events like linkup to EPF
driver instead of using linkup ops in EPF driver. This is in preparation
for adding proper locking mechanism to EPF ops. This will also enable to
add more events (in addition to linkup) in the future.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Vidya Sagar <vidyas@nvidia.com>
|
|
- Fix endpoint driver sign extension problem when shifting page number to
phys_addr_t (Alan Mikhak)
* remotes/lorenzo/pci/endpoint:
PCI: endpoint: Cast the page number to phys_addr_t
|
|
Modify pci_epc_mem_alloc_addr() to cast the variable 'pageno'
from type 'int' to 'phys_addr_t' before shifting left. This
cast is needed to avoid treating bit 31 of 'pageno' as the
sign bit which would otherwise get sign-extended to produce
a negative value. When added to the base address of PCI memory
space, the negative value would produce an invalid physical
address which falls before the start of the PCI memory space.
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Code that iterates over all standard PCI BARs typically uses
PCI_STD_RESOURCE_END. However, that requires the unusual test
"i <= PCI_STD_RESOURCE_END" rather than something the typical
"i < PCI_STD_NUM_BARS".
Add a definition for PCI_STD_NUM_BARS and change loops to use the more
idiomatic C style to help avoid fencepost errors.
Link: https://lore.kernel.org/r/20190927234026.23342-1-efremov@linux.com
Link: https://lore.kernel.org/r/20190927234308.23935-1-efremov@linux.com
Link: https://lore.kernel.org/r/20190916204158.6889-3-efremov@linux.com
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Sebastian Ott <sebott@linux.ibm.com> # arch/s390/
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> # video/fbdev/
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> # pci/controller/dwc/
Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> # scsi/pm8001/
Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi/pm8001/
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # memstick/
|
|
Associated pci_epf_bar structure is needed in pci_epc_clear_bar() to
clear a BAR correctly but it is reset in pci_epf_free_space() (that
is called first) which results in pci_epc_clear_bar() failure.
Reorder the pci_epc_clear_bar()/pci_epf_free_space() calls execution
to fix the issue.
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
[lorenzo.pieralisi@arm.com: reworded the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Always skip odd BAR when skipping 64bit BARs in pci_epf_test_set_bar()
and pci_epf_test_alloc_space() otherwise pci_epf_test_set_bar() will
call pci_epc_set_bar() on an odd loop index when skipping reserved 64bit
BAR.
Moreover, pci_epf_test_alloc_space() will call pci_epf_alloc_space() on
bind for an odd loop index when BAR is 64bit but leaks on subsequent
unbind by not calling pci_epf_free_space().
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
PCI endpoint test function code should honor the .bar_fixed_size parameter
from underlying endpoint controller drivers or results may be unexpected.
In pci_epf_test_alloc_space(), check if BAR being used for test
register space is a fixed size BAR. If so, allocate the required fixed
size.
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
Set endpoint controller pointer to NULL in pci_epc_remove_epf()
to avoid -EBUSY on subsequent call to pci_epc_add_epf().
Add a check for NULL endpoint function pointer.
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
|
