summaryrefslogtreecommitdiff
path: root/drivers/pci/hotplug
AgeCommit message (Collapse)Author
2021-11-08s390/pci: implement reset_slot for hotplug slotNiklas Schnelle
This is done by adding a zpci_hot_reset_device() call which does a low level reset of the PCI function without changing its higher level function state. This way it can be used while the zPCI function is bound to a driver and with DMA tables being controlled either through the IOMMU or DMA APIs which is prohibited when using zpci_disable_device() as that drop existing DMA translations. As this reset, unlike a normal FLR, also calls zpci_clear_irq() we need to implement arch_restore_msi_irqs() and make sure we re-enable IRQs for the PCI function if they were previously disabled. Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-11-06Merge tag 'pci-v5.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Conserve IRQs by setting up portdrv IRQs only when there are users (Jan Kiszka) - Rework and simplify _OSC negotiation for control of PCIe features (Joerg Roedel) - Remove struct pci_dev.driver pointer since it's redundant with the struct device.driver pointer (Uwe Kleine-König) Resource management: - Coalesce contiguous host bridge apertures from _CRS to accommodate BARs that cover more than one aperture (Kai-Heng Feng) Sysfs: - Check CAP_SYS_ADMIN before parsing user input (Krzysztof Wilczyński) - Return -EINVAL consistently from "store" functions (Krzysztof Wilczyński) - Use sysfs_emit() in endpoint "show" functions to avoid buffer overruns (Kunihiko Hayashi) PCIe native device hotplug: - Ignore Link Down/Up caused by resets during error recovery so endpoint drivers can remain bound to the device (Lukas Wunner) Virtualization: - Avoid bus resets on Atheros QCA6174, where they hang the device (Ingmar Klein) - Work around Pericom PI7C9X2G switch packet drop erratum by using store and forward mode instead of cut-through (Nathan Rossi) - Avoid trying to enable AtomicOps on VFs; the PF setting applies to all VFs (Selvin Xavier) MSI: - Document that /sys/bus/pci/devices/.../irq contains the legacy INTx interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry Song) VPD: - Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere in the possible VPD space; use these to simplify the cxgb3 driver (Heiner Kallweit) Peer-to-peer DMA: - Add (not subtract) the bus offset when calculating DMA address (Wang Lu) ASPM: - Re-enable LTR at Downstream Ports so they don't report Unsupported Requests when reset or hot-added devices send LTR messages (Mingchuang Qiao) Apple PCIe controller driver: - Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc Zyngier) Cadence PCIe controller driver: - Return success when probe succeeds instead of falling into error path (Li Chen) HiSilicon Kirin PCIe controller driver: - Reorganize PHY logic and add support for external PHY drivers (Mauro Carvalho Chehab) - Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro Carvalho Chehab) - Add Kirin 970 support (Mauro Carvalho Chehab) - Make driver removable (Mauro Carvalho Chehab) Intel VMD host bridge driver: - If IOMMU supports interrupt remapping, leave VMD MSI-X remapping enabled (Adrian Huang) - Number each controller so we can tell them apart in /proc/interrupts (Chunguang Xu) - Avoid building on UML because VMD depends on x86 bare metal APIs (Johannes Berg) Marvell Aardvark PCIe controller driver: - Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár) - Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár) - Downgrade PIO Response Status messages to debug level (Marek Behún) - Preserve CRS SV (Config Request Retry Software Visibility) bit in emulated Root Control register (Pali Rohár) - Fix issue in configuring reference clock (Pali Rohár) - Don't clear status bits for masked interrupts (Pali Rohár) - Don't mask unused interrupts (Pali Rohár) - Avoid code repetition in advk_pcie_rd_conf() (Marek Behún) - Retry config accesses on CRS response (Pali Rohár) - Simplify emulated Root Capabilities initialization (Pali Rohár) - Fix several link training issues (Pali Rohár) - Fix link-up checking via LTSSM (Pali Rohár) - Fix reporting of Data Link Layer Link Active (Pali Rohár) - Fix emulation of W1C bits (Marek Behún) - Fix MSI domain .alloc() method to return zero on success (Marek Behún) - Read entire 16-bit MSI vector in MSI handler, not just low 8 bits (Marek Behún) - Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits at startup; PCI core will set those as necessary (Pali Rohár) - When operating as a Root Port, set class code to "PCI Bridge" instead of the default "Mass Storage Controller" (Pali Rohár) - Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't implement this per spec (Pali Rohár) - Add emulation of option ROM BAR since aardvark doesn't implement this per spec (Pali Rohár) MediaTek MT7621 PCIe controller driver: - Add MediaTek MT7621 PCIe host controller driver and DT binding (Sergio Paracuellos) Qualcomm PCIe controller driver: - Add SC8180x compatible string (Bjorn Andersson) - Add endpoint controller driver and DT binding (Manivannan Sadhasivam) - Restructure to use of_device_get_match_data() (Prasad Malisetty) - Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty) Renesas R-Car PCIe controller driver: - Remove unnecessary includes (Geert Uytterhoeven) Rockchip DesignWare PCIe controller driver: - Add DT binding (Simon Xue) Socionext UniPhier Pro5 controller driver: - Serialize INTx masking/unmasking (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Run dwc .host_init() method before registering MSI interrupt handler so we can deal with pending interrupts left by bootloader (Bjorn Andersson) - Clean up Kconfig dependencies (Andy Shevchenko) - Export symbols to allow more modular drivers (Luca Ceresoli) TI DRA7xx PCIe controller driver: - Allow host and endpoint drivers to be modules (Luca Ceresoli) - Enable external clock if present (Luca Ceresoli) TI J721E PCIe driver: - Disable PHY when probe fails after initializing it (Christophe JAILLET) MicroSemi Switchtec management driver: - Return error to application when command execution fails because an out-of-band reset has cleared the device BARs, Memory Space Enable, etc (Kelvin Cao) - Fix MRPC error status handling issue (Kelvin Cao) - Mask out other bits when reading of management VEP instance ID (Kelvin Cao) - Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions (Kelvin Cao) - Add check of event support (Logan Gunthorpe) Miscellaneous: - Remove unused pci_pool wrappers, which have been replaced by dma_pool (Cai Huoqing) - Use 'unsigned int' instead of bare 'unsigned' (Krzysztof Wilczyński) - Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof Wilczyński) - Fix some sscanf(), sprintf() format mismatches (Krzysztof Wilczyński) - Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński) - Correct some misspellings (Krzysztof Wilczyński)" * tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits) PCI: Add ACS quirk for Pericom PI7C9X2G switches PCI: apple: Configure RID to SID mapper on device addition iommu/dart: Exclude MSI doorbell from PCIe device IOVA range PCI: apple: Implement MSI support PCI: apple: Add INTx and per-port interrupt support PCI: kirin: Allow removing the driver PCI: kirin: De-init the dwc driver PCI: kirin: Disable clkreq during poweroff sequence PCI: kirin: Move the power-off code to a common routine PCI: kirin: Add power_off support for Kirin 960 PHY PCI: kirin: Allow building it as a module PCI: kirin: Add MODULE_* macros PCI: kirin: Add Kirin 970 compatible PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge PCI: apple: Set up reference clocks when probing PCI: apple: Add initial hardware bring-up PCI: of: Allow matching of an interrupt-map local to a PCI device of/irq: Allow matching of an interrupt-map local to an interrupt controller irqdomain: Make of_phandle_args_to_fwspec() generally available PCI: Do not enable AtomicOps on VFs ...
2021-11-05Merge branch 'pci/misc'Bjorn Helgaas
- Tidy setup-irq.c comments (Pranay Sanghai) - Fix misspellings (Krzysztof Wilczyński) - Fix sprintf(), sscanf() format mismatches (Krzysztof Wilczyński) - Tidy cpqphp code formatting (Krzysztof Wilczyński) - Remove unused pci_pool wrappers, which have been replaced by dma_pool (Cai Huoqing) - Remove a redundant initialization in __pci_reset_function_locked() (Colin Ian King) - Use 'unsigned int' instead of 'unsigned' (Krzysztof Wilczyński) - Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński) - Include generic <linux/> headers instead of <asm/> for cpqphp and vmd (Krzysztof Wilczyński) * pci/misc: PCI: vmd: Drop redundant includes of <asm/device.h>, <asm/msi.h> PCI: cpqphp: Use <linux/io.h> instead of <asm/io.h> MAINTAINERS: Update PCI subsystem information PCI: Prefer 'unsigned int' over bare 'unsigned' PCI: Remove redundant 'rc' initialization PCI: Remove unused pci_pool wrappers PCI: cpqphp: Format if-statement code block correctly PCI: Use unsigned to match sscanf("%x") in pci_dev_str_match_path() PCI: hv: Remove unnecessary use of %hx PCI: Correct misspelled and remove duplicated words PCI: Tidy comments
2021-11-02PCI: cpqphp: Use <linux/io.h> instead of <asm/io.h>Krzysztof Wilczyński
Use the preferred generic header file linux/io.h that already includes the corresponding asm/io.h file. Link: https://lore.kernel.org/r/20211013003145.1107148-2-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
2021-10-15PCI: pciehp: Ignore Link Down/Up caused by error-induced Hot ResetLukas Wunner
Stuart Hayes reports that an error handled by DPC at a Root Port results in pciehp gratuitously bringing down a subordinate hotplug port: RP -- UP -- DP -- UP -- DP (hotplug) -- EP pciehp brings the slot down because the Link to the Endpoint goes down. That is caused by a Hot Reset being propagated as a result of DPC. Per PCIe Base Spec 5.0, section 6.6.1 "Conventional Reset": For a Switch, the following must cause a hot reset to be sent on all Downstream Ports: [...] * The Data Link Layer of the Upstream Port reporting DL_Down status. In Switches that support Link speeds greater than 5.0 GT/s, the Upstream Port must direct the LTSSM of each Downstream Port to the Hot Reset state, but not hold the LTSSMs in that state. This permits each Downstream Port to begin Link training immediately after its hot reset completes. This behavior is recommended for all Switches. * Receiving a hot reset on the Upstream Port. Once DPC recovers, pcie_do_recovery() walks down the hierarchy and invokes pcie_portdrv_slot_reset() to restore each port's config space. At that point, a hotplug interrupt is signaled per PCIe Base Spec r5.0, section 6.7.3.4 "Software Notification of Hot-Plug Events": If the Port is enabled for edge-triggered interrupt signaling using MSI or MSI-X, an interrupt message must be sent every time the logical AND of the following conditions transitions from FALSE to TRUE: [...] * The Hot-Plug Interrupt Enable bit in the Slot Control register is set to 1b. * At least one hot-plug event status bit in the Slot Status register and its associated enable bit in the Slot Control register are both set to 1b. Prevent pciehp from gratuitously bringing down the slot by clearing the error-induced Data Link Layer State Changed event before restoring config space. Afterwards, check whether the link has unexpectedly failed to retrain and synthesize a DLLSC event if so. Allow each pcie_port_service_driver (one of them being pciehp) to define a slot_reset callback and re-use the existing pm_iter() function to iterate over the callbacks. Thereby, the Endpoint driver remains bound throughout error recovery and may restore the device to working state. Surprise removal during error recovery is detected through a Presence Detect Changed event. The hotplug port is expected to not signal that event as a result of a Hot Reset. The issue isn't DPC-specific, it also occurs when an error is handled by AER through aer_root_reset(). So while the issue was noticed only now, it's been around since 2006 when AER support was first introduced. [bhelgaas: drop PCI_ERROR_RECOVERY Kconfig, split pm_iter() rename to preparatory patch] Link: https://lore.kernel.org/linux-pci/08c046b0-c9f2-3489-eeef-7e7aca435bb9@gmail.com/ Fixes: 6c2b374d7485 ("PCI-Express AER implemetation: AER core and aerdriver") Link: https://lore.kernel.org/r/251f4edcc04c14f873ff1c967bc686169cd07d2d.1627638184.git.lukas@wunner.de Reported-by: Stuart Hayes <stuart.w.hayes@gmail.com> Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v2.6.19+: ba952824e6c1: PCI/portdrv: Report reset for frozen channel Cc: Keith Busch <kbusch@kernel.org>
2021-10-12PCI: cpqphp: Format if-statement code block correctlyKrzysztof Wilczyński
The code block related to the if-statement in cpqhp_set_irq() is somewhat awkwardly formatted making the code hard to read. Make it readable. No change to functionality intended. Link: https://lore.kernel.org/r/20211013011412.1110829-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-08PCI: Correct misspelled and remove duplicated wordsKrzysztof Wilczyński
Correct a number of misspelled words and remove any words that were duplicated in the PCI tree. No change to functionality intended. Link: https://lore.kernel.org/r/20211006233827.147328-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-04s390/pci: fix zpci_zdev_put() on reserveNiklas Schnelle
Since commit 2a671f77ee49 ("s390/pci: fix use after free of zpci_dev") the reference count of a zpci_dev is incremented between pcibios_add_device() and pcibios_release_device() which was supposed to prevent the zpci_dev from being freed while the common PCI code has access to it. It was missed however that the handling of zPCI availability events assumed that once zpci_zdev_put() was called no later availability event would still see the device. With the previously mentioned commit however this assumption no longer holds and we must make sure that we only drop the initial long-lived reference the zPCI subsystem holds exactly once. Do so by introducing a zpci_device_reserved() function that handles when a device is reserved. Here we make sure the zpci_dev will not be considered for further events by removing it from the zpci_list. This also means that the device actually stays in the ZPCI_FN_STATE_RESERVED state between the time we know it has been reserved and the final reference going away. We thus need to consider it a real state instead of just a conceptual state after the removal. The final cleanup of PCI resources, removal from zbus, and destruction of the IOMMU stays in zpci_release_device() to make sure holders of the reference do see valid data until the release. Fixes: 2a671f77ee49 ("s390/pci: fix use after free of zpci_dev") Cc: stable@vger.kernel.org Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-09-02Merge branch 'pci/reset'Bjorn Helgaas
- Cache PCIe Device Capabilities register (Amey Narkhede) - Add pcie_reset_flr() with 'probe' argument (Amey Narkhede) - Add pdev->reset_methods[] array to track reset method ordering (Amey Narkhede) - Remove reset_fn field from pci_dev (Amey Narkhede) - Add sysfs interface to query and set device reset mechanism (Amey Narkhede) - Add pci_set_acpi_fwnode() to set ACPI_COMPANION (Shanker Donthineni) - Use acpi_pci_power_manageable() instead of duplicating logic (Shanker Donthineni) - Set ACPI fwnode early and at the same time with OF (Shanker Donthineni) - Add support for ACPI _RST reset method (Shanker Donthineni) - Change reset function 'probe' argument to bool (Amey Narkhede) * pci/reset: PCI: Change the type of probe argument in reset functions PCI: Add support for ACPI _RST reset method PCI: Setup ACPI fwnode early and at the same time with OF PCI: Use acpi_pci_power_manageable() PCI: Add pci_set_acpi_fwnode() to set ACPI_COMPANION PCI: Allow userspace to query and set device reset mechanism PCI: Remove reset_fn field from pci_dev PCI: Add array to track reset method ordering PCI: Add pcie_reset_flr() with 'probe' argument PCI: Cache PCIe Device Capabilities register
2021-09-02PCI: ibmphp: Fix double unmap of io_memVishal Aslot
ebda_rsrc_controller() calls iounmap(io_mem) on the error path. Its caller, ibmphp_access_ebda(), also calls iounmap(io_mem) on good and error paths. Remove the iounmap(io_mem) invocation from ebda_rsrc_controller(). [bhelgaas: remove item from TODO] Link: https://lore.kernel.org/r/20210818165751.591185-1-os.vaslot@gmail.com Signed-off-by: Vishal Aslot <os.vaslot@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-18PCI: Change the type of probe argument in reset functionsAmey Narkhede
Change the type of probe argument in functions which implement reset methods from int to bool to make the context and intent clear. Suggested-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20210817180500.1253-10-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-07-06Merge branch 'pci/kernel-doc'Bjorn Helgaas
- Fix kernel-doc formatting errors (Krzysztof Wilczyński) * pci/kernel-doc: PCI: Fix kernel-doc formatting
2021-07-06Merge branch 'pci/sysfs'Bjorn Helgaas
- Fix dsm_label_utf16s_to_utf8s() buffer overrun (Krzysztof Wilczyński) - Use sysfs_emit() and sysfs_emit_at() in "show" functions (Krzysztof Wilczyński) - Fix 'resource_alignment' newline issues (Krzysztof Wilczyński) - Add newline to 'devspec' sysfs file (Krzysztof Wilczyński) * pci/sysfs: PCI/sysfs: Add 'devspec' newline PCI/sysfs: Fix 'resource_alignment' newline issues PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functions PCI/sysfs: Rely on lengths from scnprintf(), dsm_label_utf16s_to_utf8s() PCI/sysfs: Fix dsm_label_utf16s_to_utf8s() buffer overrun # Conflicts: # drivers/pci/p2pdma.c
2021-07-06PCI: Fix kernel-doc formattingKrzysztof Wilczyński
Fix kernel-doc formatting throughout drivers/pci and related include files. No change to functionality intended. Check for warnings: $ find include drivers/pci -type f -path "*pci*.[ch]" | xargs scripts/kernel-doc -none [bhelgaas: squashed to one commit] Link: https://lore.kernel.org/r/20210509030237.368540-1-kw@linux.com Link: https://lore.kernel.org/r/20210703151306.1922450-1-kw@linux.com Link: https://lore.kernel.org/r/20210703151306.1922450-2-kw@linux.com Link: https://lore.kernel.org/r/20210703151306.1922450-3-kw@linux.com Link: https://lore.kernel.org/r/20210703151306.1922450-4-kw@linux.com Link: https://lore.kernel.org/r/20210703151306.1922450-5-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-07-01PCI: cpcihp: Declare cpci_debug in header fileKrzysztof Wilczyński
cpci_debug is declared as a global variable in cpci_hotplug_core.c and used in cpci_hotplug_pci.c via an "extern". Add an extern declaration in the header file. Resolves the following sparse warning: drivers/pci/hotplug/cpci_hotplug_core.c:47:5: warning: symbol 'cpci_debug' was not declared. Should it be static? Link: https://lore.kernel.org/r/20210701184306.1492003-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-06-16PCI: pciehp: Ignore Link Down/Up caused by DPCLukas Wunner
Downstream Port Containment (PCIe r5.0, sec. 6.2.10) disables the link upon an error and attempts to re-enable it when instructed by the DPC driver. A slot which is both DPC- and hotplug-capable is currently powered off by pciehp once DPC is triggered (due to the link change) and powered back up on successful recovery. That's undesirable, the slot should remain powered so the hotplugged device remains bound to its driver. DPC notifies the driver of the error and of successful recovery in pcie_do_recovery() and the driver may then restore the device to working state. Moreover, Sinan points out that turning off slot power by pciehp may foil recovery by DPC: Power off/on is a cold reset concurrently to DPC's warm reset. Sathyanarayanan reports extended delays or failure in link retraining by DPC if pciehp brings down the slot. Fix by detecting whether a Link Down event is caused by DPC and awaiting recovery if so. On successful recovery, ignore both the Link Down and the subsequent Link Up event. Afterwards, check whether the link is down to detect surprise-removal or another DPC event immediately after DPC recovery. Ensure that the corresponding DLLSC event is not ignored by synthesizing it and invoking irq_wake_thread() to trigger a re-run of pciehp_ist(). The IRQ threads of the hotplug and DPC drivers, pciehp_ist() and dpc_handler(), race against each other. If pciehp is faster than DPC, it will wait until DPC recovery completes. Recovery consists of two steps: The first step (waiting for link disablement) is recognizable by pciehp through a set DPC Trigger Status bit. The second step (waiting for link retraining) is recognizable through a newly introduced PCI_DPC_RECOVERING flag. If DPC is faster than pciehp, neither of the two flags will be set and pciehp may glean the recovery status from the new PCI_DPC_RECOVERED flag. The flag is zero if DPC didn't occur at all, hence DLLSC events are not ignored by default. pciehp waits up to 4 seconds before assuming that DPC recovery failed and bringing down the slot. This timeout is not taken from the spec (it doesn't mandate one) but based on a report from Yicong Yang that DPC may take a bit more than 3 seconds on HiSilicon's Kunpeng platform. The timeout is necessary because the DPC Trigger Status bit may never clear: On Root Ports which support RP Extensions for DPC, the DPC driver polls the DPC RP Busy bit for up to 1 second before giving up on DPC recovery. Without the timeout, pciehp would then wait indefinitely for DPC to complete. This commit draws inspiration from previous attempts to synchronize DPC with pciehp: By Sinan Kaya, August 2018: https://lore.kernel.org/linux-pci/20180818065126.77912-1-okaya@kernel.org/ By Ethan Zhao, October 2020: https://lore.kernel.org/linux-pci/20201007113158.48933-1-haifeng.zhao@intel.com/ By Kuppuswamy Sathyanarayanan, March 2021: https://lore.kernel.org/linux-pci/59cb30f5e5ac6d65427ceaadf1012b2ba8dbf66c.1615606143.git.sathyanarayanan.kuppuswamy@linux.intel.com/ Link: https://lore.kernel.org/r/0be565d97438fe2a6d57354b3aa4e8626952a00b.1619857124.git.lukas@wunner.de Reported-by: Sinan Kaya <okaya@kernel.org> Reported-by: Ethan Zhao <haifeng.zhao@intel.com> Reported-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Keith Busch <kbusch@kernel.org>
2021-06-03PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functionsKrzysztof Wilczyński
The sysfs_emit() and sysfs_emit_at() functions were introduced to make it less ambiguous which function is preferred when writing to the output buffer in a device attribute's "show" callback [1]. Convert the PCI sysfs object "show" functions from sprintf(), snprintf() and scnprintf() to sysfs_emit() and sysfs_emit_at() accordingly, as the latter is aware of the PAGE_SIZE buffer and correctly returns the number of bytes written into the buffer. No functional change intended. [1] Documentation/filesystems/sysfs.rst Related commit: ad025f8e46f3 ("PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functions"). Link: https://lore.kernel.org/r/20210603000112.703037-2-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2021-05-06Merge tag 's390-5.13-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Heiko Carstens: - add support for system call stack randomization - handle stale PCI deconfiguration events - couple of defconfig updates - some fixes and cleanups * tag 's390-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix detection of vector enhancements facility 1 vs. vector packed decimal facility s390/entry: add support for syscall stack randomization s390/configs: change CONFIG_VIRTIO_CONSOLE to "m" s390/cio: remove invalid condition on IO_SCH_UNREG s390/cpumf: remove call to perf_event_update_userpage s390/cpumf: move counter set size calculation to common place s390/cpumf: beautify if-then-else indentation s390/configs: enable CONFIG_PCI_IOV s390/pci: handle stale deconfiguration events s390/pci: rename zpci_configure_device()
2021-05-05Merge tag 'pci-v5.13-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Release OF node when pci_scan_device() fails (Dmitry Baryshkov) - Add pci_disable_parity() (Bjorn Helgaas) - Disable Mellanox Tavor parity reporting (Heiner Kallweit) - Disable N2100 r8169 parity reporting (Heiner Kallweit) - Fix RCiEP device to RCEC association (Qiuxu Zhuo) - Convert sysfs "config", "rom", "reset", "label", "index", "acpi_index" to static attributes to help fix races in device enumeration (Krzysztof Wilczyński) - Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof Wilczyński) - Use sysfs_emit() in "show" functions (Krzysztof Wilczyński) - Remove unused alloc_pci_root_info() return value (Krzysztof Wilczyński) PCI device hotplug: - Fix acpiphp reference count leak (Feilong Lin) Power management: - Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki) - Fix runtime PM imbalance (Dinghao Liu) Virtualization: - Increase delay after FLR to work around Intel DC P4510 NVMe erratum (Raphael Norwitz) MSI: - Convert rcar, tegra, xilinx to MSI domains (Marc Zyngier) - For rcar, xilinx, use controller address as MSI doorbell (Marc Zyngier) - Remove unused hv msi_controller struct (Marc Zyngier) - Remove unused PCI core msi_controller support (Marc Zyngier) - Remove struct msi_controller altogether (Marc Zyngier) - Remove unused default_teardown_msi_irqs() (Marc Zyngier) - Let host bridges declare their reliance on MSI domains (Marc Zyngier) - Make pci_host_common_probe() declare its reliance on MSI domains (Marc Zyngier) - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner) - Document ways of ending up with NO_MSI (Marc Zyngier) - Refactor HT advertising of NO_MSI flag (Marc Zyngier) VPD: - Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner Kallweit) - Remove sysfs VPD size checking dead code (Heiner Kallweit) - Convert VPF sysfs file to static attribute (Heiner Kallweit) - Remove unnecessary pci_set_vpd_size() (Heiner Kallweit) - Tone down "missing VPD" message (Heiner Kallweit) Endpoint framework: - Fix NULL pointer dereference when epc_features not implemented (Shradha Todi) - Add missing destroy_workqueue() in endpoint test (Yang Yingliang) Amazon Annapurna Labs PCIe controller driver: - Fix compile testing without CONFIG_PCI_ECAM (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) APM X-Gene PCIe controller driver: - Fix cfg resource mapping regression (Dejin Zheng) Broadcom iProc PCIe controller driver: - Return zero for success of iproc_msi_irq_domain_alloc() (Pali Rohár) Broadcom STB PCIe controller driver: - Add reset_control_rearm() stub for !CONFIG_RESET_CONTROLLER (Jim Quinlan) - Fix use of BCM7216 reset controller (Jim Quinlan) - Use reset/rearm for Broadcom STB pulse reset instead of deassert/assert (Jim Quinlan) - Fix brcm_pcie_probe() error return for unsupported revision (Wei Yongjun) Cavium ThunderX PCIe controller driver: - Fix compile testing (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) Freescale Layerscape PCIe controller driver: - Fix ls_pcie_ep_probe() syntax error (comma for semicolon) (Krzysztof Wilczyński) - Remove layerscape-gen4 dependencies on OF and ARM64, add dependency on ARCH_LAYERSCAPE (Geert Uytterhoeven) HiSilicon HIP PCIe controller driver: - Remove obsolete HiSilicon PCIe DT description (Dongdong Liu) Intel Gateway PCIe controller driver: - Remove unused pcie_app_rd() (Jiapeng Chong) Intel VMD host bridge driver: - Program IRTE with Requester ID of VMD endpoint, not child device (Jon Derrick) - Disable VMD MSI-X remapping when possible so children can use more MSI-X vectors (Jon Derrick) MediaTek PCIe controller driver: - Configure FC and FTS for functions other than 0 (Ryder Lee) - Add YAML schema for MediaTek (Jianjun Wang) - Export pci_pio_to_address() for module use (Jianjun Wang) - Add MediaTek MT8192 PCIe controller driver (Jianjun Wang) - Add MediaTek MT8192 INTx support (Jianjun Wang) - Add MediaTek MT8192 MSI support (Jianjun Wang) - Add MediaTek MT8192 system power management support (Jianjun Wang) - Add missing MODULE_DEVICE_TABLE (Qiheng Lin) Microchip PolarFlare PCIe controller driver: - Make several symbols static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Add MCFG quirks for Tegra194 ECAM errata (Vidya Sagar) - Make several symbols const (Rikard Falkeborn) - Fix Kconfig host/endpoint typo (Wesley Sheng) SiFive FU740 PCIe controller driver: - Add pcie_aux clock to prci driver (Greentime Hu) - Use reset-simple in prci driver for PCIe (Greentime Hu) - Add SiFive FU740 PCIe host controller driver and DT binding (Paul Walmsley, Greentime Hu) Synopsys DesignWare PCIe controller driver: - Move MSI Receiver init to dw_pcie_host_init() so it is re-initialized along with the RC in resume (Jisheng Zhang) - Move iATU detection earlier to fix regression (Hou Zhiqiang) TI J721E PCIe driver: - Add DT binding and TI j721e support for refclk to PCIe connector (Kishon Vijay Abraham I) - Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon Vijay Abraham I) TI Keystone PCIe controller driver: - Use generic config accessors for TI AM65x (K3) to fix regression (Kishon Vijay Abraham I) Xilinx NWL PCIe controller driver: - Add support for coherent PCIe DMA traffic using CCI (Bharat Kumar Gogada) - Add optional "dma-coherent" DT property (Bharat Kumar Gogada) Miscellaneous: - Fix kernel-doc warnings (Krzysztof Wilczyński) - Remove unused MicroGate SyncLink device IDs (Jiri Slaby) - Remove redundant dev_err() for devm_ioremap_resource() failure (Chen Hui) - Remove redundant initialization (Colin Ian King) - Drop redundant dev_err() for platform_get_irq() errors (Krzysztof Wilczyński)" * tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (98 commits) riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC PCI: fu740: Add SiFive FU740 PCIe host controller driver dt-bindings: PCI: Add SiFive FU740 PCIe host controller MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver clk: sifive: Use reset-simple in prci driver for PCIe driver clk: sifive: Add pcie_aux clock in prci driver for PCIe driver PCI: brcmstb: Use reset/rearm instead of deassert/assert ata: ahci_brcm: Fix use of BCM7216 reset controller reset: add missing empty function reset_control_rearm() PCI: Allow VPD access for QLogic ISP2722 PCI/VPD: Add helper pci_get_func0_dev() PCI/VPD: Remove pci_vpd_find_tag() SRDT handling PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument PCI/VPD: Change pci_vpd_init() return type to void PCI/VPD: Make missing VPD message less alarming PCI/VPD: Remove pci_set_vpd_size() x86/PCI: Remove unused alloc_pci_root_info() return value MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer PCI: mediatek-gen3: Add system PM support PCI: mediatek-gen3: Add MSI support ...
2021-05-04Merge branch 'pci/kernel-doc'Bjorn Helgaas
- Fix kernel-doc warnings (Krzysztof Wilczyński) * pci/kernel-doc: PCI: Fix kernel-doc errors
2021-04-30s390/pci: rename zpci_configure_device()Niklas Schnelle
With zpci_configure_device() now always called on a device that has already been configured on the platform level its name has become misleading. Rename it to zpci_scan_configured_device() to signify that the function now only handles the correct scanning of a newly configured PCI function taking care of the special handling necessary for function 0 and functions parked waiting for a PCI bus that can't be created without first seeing function 0. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-16PCI: acpiphp: Fix whitespace issuechakravarthikulkarni
Fix coding style for braces. [bhelgaas: drop comment change] Link: https://lore.kernel.org/r/20210301072145.19018-1-chakravarthikulkarni2021@gmail.com Signed-off-by: chakravarthikulkarni <chakravarthikulkarni2021@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-16PCI: shpchp: Remove unused shpc_writeb()Jiapeng Chong
Fix the following clang warning: drivers/pci/hotplug/shpchp_hpc.c:177:20: warning: unused function 'shpc_writeb' [-Wunused-function]. Link: https://lore.kernel.org/r/1618475422-96531-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-04-14PCI: cpqphp: Use DEFINE_SPINLOCK() for int15_lockGuobin Huang
Initialize the static int15_lock spinlock with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Link: https://lore.kernel.org/r/1617710797-48903-1-git-send-email-huangguobin4@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Guobin Huang <huangguobin4@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-12s390/pci: narrow scope of zpci_configure_device()Niklas Schnelle
Currently zpci_configure_device() can be called on a zPCI function in two completely different states. Either the underlying zPCI function has already been configured by the platform and we are only doing the scanning to get it usable by Linux drivers. Or the underlying function is in Standby and we first do an SCLP to get it configured. This makes zpci_configure_device() harder to reason about. Since calling zpci_configure_device() on a function in Standby only happens in enable_slot() simply pull out the SCLP call and setting of zdev->state and thus call zpci_configure_device() under the same circumstances as in the event handling code. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-08ACPI / hotplug / PCI: Fix reference count leak in enable_slot()Feilong Lin
In enable_slot(), if pci_get_slot() returns NULL, we clear the SLOT_ENABLED flag. When pci_get_slot() finds a device, it increments the device's reference count. In this case, we did not call pci_dev_put() to decrement the reference count, so the memory of the device (struct pci_dev type) will eventually leak. Call pci_dev_put() to decrement its reference count when pci_get_slot() returns a PCI device. Link: https://lore.kernel.org/r/b411af88-5049-a1c6-83ac-d104a1f429be@huawei.com Signed-off-by: Feilong Lin <linfeilong@huawei.com> Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-03-22s390/pci: unify de-/configure for slots and eventsNiklas Schnelle
A zPCI event with PEC 0x0301 for an existing zPCI device goes through the same actions as enable_slot(). Similarly a zPCI event with PEC 0x0303 does the same steps as disable_slot(). We can thus unify both actions as zpci_configure_device() respectively zpci_deconfigure_device(). Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22s390/pci: refactor zpci function statesNiklas Schnelle
The current zdev->state mixes the configuration states supported by CLP with an additional Online state which is used inconsistently to include enabled zPCI functions which are not yet visible to the common PCI subsytem. In preparation for a clean separation between architected configuration states and fine grained function states remove the Online function state. Where we previously checked for Online it is more accurate to check if the function is enabled to avoid an edge case where a disabled device was still treated as Online. This also simplifies checks whether a function is configured as this is now directly reflected by its function state. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-21Merge tag 'powerpc-5.12-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a possible stack corruption and subsequent DLPAR failure in the rpadlpar_io PCI hotplug driver - Two build fixes for uncommon configurations Thanks to Christophe Leroy and Tyrel Datwyler. * tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: PCI: rpadlpar: Fix potential drc_name corruption in store functions powerpc: Force inlining of cpu_has_feature() to avoid build failure powerpc/vdso32: Add missing _restgpr_31_x to fix build failure
2021-03-17PCI: rpadlpar: Fix potential drc_name corruption in store functionsTyrel Datwyler
Both add_slot_store() and remove_slot_store() try to fix up the drc_name copied from the store buffer by placing a NUL terminator at nbyte + 1 or in place of a '\n' if present. However, the static buffer that we copy the drc_name data into is not zeroed and can contain anything past the n-th byte. This is problematic if a '\n' byte appears in that buffer after nbytes and the string copied into the store buffer was not NUL terminated to start with as the strchr() search for a '\n' byte will mark this incorrectly as the end of the drc_name string resulting in a drc_name string that contains garbage data after the n-th byte. Additionally it will cause us to overwrite that '\n' byte on the stack with NUL, potentially corrupting data on the stack. The following debugging shows an example of the drmgr utility writing "PHB 4543" to the add_slot sysfs attribute, but add_slot_store() logging a corrupted string value. drmgr: drmgr: -c phb -a -s PHB 4543 -d 1 add_slot_store: drc_name = PHB 4543°|<82>!, rc = -19 Fix this by using strscpy() instead of memcpy() to ensure the string is NUL terminated when copied into the static drc_name buffer. Further, since the string is now NUL terminated the code only needs to change '\n' to '\0' when present. Cc: stable@vger.kernel.org Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> [mpe: Reformat change log and add mention of possible stack corruption] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210315214821.452959-1-tyreld@linux.ibm.com
2021-03-15s390/pci: fix leak of PCI device structureNiklas Schnelle
In commit 05bc1be6db4b2 ("s390/pci: create zPCI bus") we removed the pci_dev_put() call matching the earlier pci_get_slot() done as part of __zpci_event_availability(). This was based on the wrong understanding that the device_put() done as part of pci_destroy_device() would counter the pci_get_slot() when it only counters the initial reference. This same understanding and existing bad example also lead to not doing a pci_dev_put() in zpci_remove_device(). Since releasing the PCI devices, unlike releasing the PCI slot, does not print any debug message for testing I added one in pci_release_dev(). This revealed that we are indeed leaking the PCI device on PCI hotunplug. Further testing also revealed another missing pci_dev_put() in disable_slot(). Fix this by adding the missing pci_dev_put() in disable_slot() and fix zpci_remove_device() with the correct pci_dev_put() calls. Also instead of calling pci_get_slot() in __zpci_event_availability() to determine if a PCI device is registered and then doing the same again in zpci_remove_device() do this once in zpci_remove_device() which makes sure that the pdev in __zpci_event_availability() is only used for the result of pci_scan_single_device() which does not need a reference count decremnt as its ownership goes to the PCI bus. Also move the check if zdev->zbus->bus is set into zpci_remove_device() since it may be that we're removing a device with devfn != 0 which never had a PCI bus. So we can still set the pdev->error_state to indicate that the device is not usable anymore, add a flag to set the error state. Fixes: 05bc1be6db4b2 ("s390/pci: create zPCI bus") Cc: <stable@vger.kernel.org> # 5.8+: e1bff843cde6 s390/pci: remove superfluous zdev->zbus check Cc: <stable@vger.kernel.org> # 5.8+: ba764dd703fe s390/pci: refactor zpci_create_device() Cc: <stable@vger.kernel.org> # 5.8+ Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-11PCI: Fix kernel-doc errorsKrzysztof Wilczyński
Fix kernel-doc formatting errors, function names that don't match the doc, and some missing parameter documentation. These are reported by: make W=1 drivers/pci/ No functional change intended. [bhelgaas: squashed into one patch since this only changes comments] Link: https://lore.kernel.org/r/20210311001724.423356-1-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-2-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-3-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-4-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-5-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-6-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-7-kw@linux.com Link: https://lore.kernel.org/r/20210311001724.423356-8-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-02-18PCI: acpiphp: Remove unused acpiphp_callback typedefChen Lin
Remove the 'acpiphp_callback' typedef as it is not used. Link: https://lore.kernel.org/r/1613443120-4279-1-git-send-email-chen45464546@163.com Signed-off-by: Chen Lin <chen.lin5@zte.com.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-11-20PCI: ibmphp: Remove unneeded breakBjorn Helgaas
A break is not needed if it is preceded by a return. Based on Tom Rix's treewide patch; this instance extracted from Joe Perches' list. Link: https://lore.kernel.org/r/20201017160928.12698-1-trix@redhat.com Link: https://lore.kernel.org/r/f530b7aeecbbf9654b4540cfa20023a4c2a11889.camel@perches .com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Tom Rix <trix@redhat.com> Cc: Joe Perches <joe@perches.com>
2020-10-22Merge tag 'pci-v5.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ...
2020-09-28PCI: shpchp: Remove unused 'rc' assignmentKrzysztof Wilczyński
The value of the constant POWER_FAILURE assigned to the variable rc after the power fault check is never used for anything, so remove it. Addresses-Coverity-ID: 1226899 ("Unused value") Link: https://lore.kernel.org/r/20200923025225.471459-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-09-17PCI: pciehp: Reduce noisiness on hot removalLukas Wunner
When a PCIe card is hot-removed, the Presence Detect State and Data Link Layer Link Active bits often do not clear simultaneously. I've seen delays of up to 244 msec between the two events with Thunderbolt. After pciehp has brought down the slot in response to the first event, the other bit may still be set. It's not discernible whether it's set because a new card is already in the slot or if it will soon clear. So pciehp tries to bring up the slot and in the latter case fails with a bunch of messages, some of them at KERN_ERR severity. If the slot is no longer occupied, the messages are false positives and annoy users. Stuart Hayes reports the following splat on hot removal: KERN_INFO pcieport 0000:3c:06.0: pciehp: Slot(180): Link Up KERN_INFO pcieport 0000:3c:06.0: pciehp: Timeout waiting for Presence Detect KERN_ERR pcieport 0000:3c:06.0: pciehp: link training error: status 0x0001 KERN_ERR pcieport 0000:3c:06.0: pciehp: Failed to check link status Dongdong Liu complains about a similar splat: KERN_INFO pciehp 0000:80:10.0:pcie004: Slot(36): Link Down KERN_INFO iommu: Removing device 0000:87:00.0 from group 12 KERN_INFO pciehp 0000:80:10.0:pcie004: Slot(36): Card present KERN_INFO pcieport 0000:80:10.0: Data Link Layer Link Active not set in 1000 msec KERN_ERR pciehp 0000:80:10.0:pcie004: Failed to check link status Users are particularly irritated to see a bringup attempt even though the slot was explicitly brought down via sysfs. In a perfect world, we could avoid this by setting Link Disable on slot bringdown and re-enabling it upon a Presence Detect State change. In reality however, there are broken hotplug ports which hardwire Presence Detect to zero, see 80696f991424 ("PCI: pciehp: Tolerate Presence Detect hardwired to zero"). Conversely, PCIe r1.0 hotplug ports hardwire Link Active to zero because Link Active Reporting wasn't specified before PCIe r1.1. On unplug, some ports first clear Presence then Link (see Stuart Hayes' splat) whereas others use the inverse order (see Dongdong Liu's splat). To top it off, there are hotplug ports which flap the Presence and Link bits on slot bringup, see 6c35a1ac3da6 ("PCI: pciehp: Tolerate initially unstable link"). pciehp is designed to work with all of these variants. Surplus attempts at slot bringup are a lesser evil than not being able to bring up slots at all. Although we could try to perfect the behavior for specific hotplug controllers, we'd risk breaking others or increasing code complexity. But we can certainly minimize annoyance by emitting only a single message with KERN_INFO severity if bringup is unsuccessful: * Drop the "Timeout waiting for Presence Detect" message in pcie_wait_for_presence(). The sole caller of that function, pciehp_check_link_status(), ignores the timeout and carries on. It emits error messages of its own and I don't think this particular message adds much value. * There's a single error condition in pciehp_check_link_status() which does not emit a message. Adding one allows dropping the "Failed to check link status" message emitted by board_added() if pciehp_check_link_status() returns a non-zero integer. * Tone down all messages in pciehp_check_link_status() to KERN_INFO severity and rephrase them to look as innocuous as possible. To this end, move the message emitted by pcie_wait_for_link_delay() to its callers. As a result, Stuart Hayes' splat becomes: KERN_INFO pcieport 0000:3c:06.0: pciehp: Slot(180): Link Up KERN_INFO pcieport 0000:3c:06.0: pciehp: Slot(180): Cannot train link: status 0x0001 Dongdong Liu's splat becomes: KERN_INFO pciehp 0000:80:10.0:pcie004: Slot(36): Card present KERN_INFO pciehp 0000:80:10.0:pcie004: Slot(36): No link The messages now merely serve as information that presence or link bits were set a little longer than expected. Bringup failures which are not false positives are still reported, albeit no longer at KERN_ERR severity. Link: https://lore.kernel.org/linux-pci/20200310182100.102987-1-stuart.w.hayes@gmail.com/ Link: https://lore.kernel.org/linux-pci/1547649064-19019-1-git-send-email-liudongdong3@huawei.com/ Link: https://lore.kernel.org/r/b45e46fd8a6aa6930aaac9d7718c2e4b787a4e5e.1595935071.git.lukas@wunner.de Reported-by: Stuart Hayes <stuart.w.hayes@gmail.com> Reported-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-09-17PCI: rpadlpar: Use for_each_child_of_node() and for_each_node_by_name()Qinglang Miao
Use for_each_child_of_node() and for_each_node_by_name() macros instead of open coding them. Link: https://lore.kernel.org/r/20200916062128.190819-1-miaoqinglang@huawei.com Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-17s390/pci: re-introduce zpci_remove_device()Niklas Schnelle
For fixing the PF to VF link removal we need to perform some action on every removal of a zdev from the common PCI subsystem. So in preparation re-introduce zpci_remove_device() and use that instead of directly calling the common code functions. This was actually still declared from earlier code but no longer implemented. Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-07Merge tag 'pci-v5.9-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Fix pci_cfg_wait queue locking problem (Bjorn Helgaas) - Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi Saheed) - Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi Saheed) - Fix pci_create_slot() reference count leak (Qiushi Wu) - Announce device after early fixups (Tiezhu Yang) PCI device hotplug: - Make rpadlpar functions static (Wei Yongjun) Driver binding: - Add device even if driver attach failed (Rajat Jain) Virtualization: - xen: Remove redundant initialization of irq (Colin Ian King) IOMMU: - Add pci_pri_supported() to check device or associated PF (Ashok Raj) - Release IVRS table in AMD ACS quirk (Hanjun Guo) - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng) - Treat "external-facing" devices themselves as internal (Rajat Jain) MSI: - Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr Stankiewicz) Error handling: - Clear PCIe Device Status errors only if OS owns AER (Jonathan Cameron) - Log correctable errors as warning, not error (Matt Jolly) - Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc Van Oostenryck) Peer-to-peer DMA: - Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe) ASPM: - Add missing newline in sysfs 'policy' (Xiongfeng Wang) Native PCIe controllers: - Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng) - Convert to devm_platform_ioremap_resource() (Dejin Zheng) - Remove duplicate error message from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Fix runtime PM imbalance on error (Dinghao Liu) - Remove dev_err() when handing an error from platform_get_irq() (Krzysztof Wilczyński) - Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) ARM Versatile PCIe controller driver: - Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring) Cadence PCIe controller driver: - Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property (Kishon Vijay Abraham I) - Remove "mem" from reg binding (Kishon Vijay Abraham I) - Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I) - Convert all r/w accessors to perform only 32-bit accesses (Kishon Vijay Abraham I) - Add support to start link and verify link status (Kishon Vijay Abraham I) - Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I) - Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I) - Fix updating Vendor ID and Subsystem Vendor ID register (Kishon Vijay Abraham I) - Use bridge resources for outbound window setup (Rob Herring) - Remove private bus number and range storage (Rob Herring) Cadence PCIe endpoint driver: - Add MSI-X support (Alan Douglas) HiSilicon PCIe controller driver: - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring) Intel VMD host bridge driver: - Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick) Loongson PCIe controller driver: - Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang) Marvell Aardvark PCIe controller driver: - Indicate error in 'val' when config read fails (Pali Rohár) - Don't touch PCIe registers if no card connected (Pali Rohár) Marvell MVEBU PCIe controller driver: - Setup BAR0 in order to fix MSI (Shmuel Hazan) Microsoft Hyper-V host bridge driver: - Fix a timing issue which causes kdump to fail occasionally (Wei Hu) - Make some functions static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Revert tegra124 raw_violation_fixup (Nicolas Chauvet) - Remove PLL power supplies (Thierry Reding) Qualcomm PCIe controller driver: - Change duplicate PCI reset to phy reset (Abhishek Sahu) - Add missing ipq806x clocks in PCIe driver (Ansuel Smith) - Add missing reset for ipq806x (Ansuel Smith) - Add ext reset (Ansuel Smith) - Use bulk clk API and assert on error (Ansuel Smith) - Add support for tx term offset for rev 2.1.0 (Ansuel Smith) - Define some PARF params needed for ipq8064 SoC (Ansuel Smith) - Add ipq8064 rev2 variant (Ansuel Smith) - Support PCI speed set for ipq806x (Sham Muthayyan) Renesas R-Car PCIe controller driver: - Use devm_pci_alloc_host_bridge() (Rob Herring) - Use struct pci_host_bridge.windows list directly (Rob Herring) - Convert rcar-gen2 to use modern host bridge probe functions (Rob Herring) TI J721E PCIe driver: - Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I) Xilinx Versal CPM PCIe controller driver: - Add Versal CPM Root Port driver and YAML schema (Bharat Kumar Gogada) MicroSemi Switchtec management driver: - Add missing __iomem and __user tags to fix sparse warnings (Logan Gunthorpe) Miscellaneous: - Replace http:// links with https:// (Alexander A. Klimov) - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas) - Remove unused pci_lost_interrupt() (Heiner Kallweit) - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen) - Fix kerneldoc warnings (Krzysztof Kozlowski)" * tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: Fix kerneldoc warnings PCI: xilinx-cpm: Add Versal CPM Root Port driver PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: Remove dev_err() when handing an error from platform_get_irq() MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe misc: pci_endpoint_test: Add J721E in pci_device_id table PCI: j721e: Add TI J721E PCIe driver PCI: switchtec: Add missing __iomem tag to fix sparse warnings PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings PCI: rpadlpar: Make functions static PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs PCI: Release IVRS table in AMD ACS quirk PCI: Announce device after early fixups PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken PCI: Remove unused pci_lost_interrupt() dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC ...
2020-08-05Merge branch 'pci/doc'Bjorn Helgaas
- Fix several kerneldoc warnings (Krzysztof Kozlowski) * pci/doc: PCI: Fix kerneldoc warnings
2020-08-05PCI: Fix kerneldoc warningsKrzysztof Kozlowski
Fix kerneldoc warnings, e.g., $ make W=1 drivers/pci/ drivers/pci/ats.c:196: warning: Function parameter or member 'pdev' not described in 'pci_enable_pri' drivers/pci/ats.c:196: warning: Function parameter or member 'reqs' not described in 'pci_enable_pri' ... Link: https://lore.kernel.org/r/20200729201224.26799-2-krzk@kernel.org Link: https://lore.kernel.org/r/20200729201224.26799-3-krzk@kernel.org Link: https://lore.kernel.org/r/20200729201224.26799-4-krzk@kernel.org Link: https://lore.kernel.org/r/20200729201224.26799-5-krzk@kernel.org Link: https://lore.kernel.org/r/20200729201224.26799-6-krzk@kernel.org Link: https://lore.kernel.org/r/20200729201224.26799-7-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-30PCI: rpadlpar: Make functions staticWei Yongjun
The sparse tool report build warnings as follows: drivers/pci/hotplug/rpadlpar_core.c:355:5: warning: symbol 'dlpar_remove_pci_slot' was not declared. Should it be static? drivers/pci/hotplug/rpadlpar_core.c:461:12: warning: symbol 'rpadlpar_io_init' was not declared. Should it be static? drivers/pci/hotplug/rpadlpar_core.c:473:6: warning: symbol 'rpadlpar_io_exit' was not declared. Should it be static? Those functions are not used outside of this file, so mark them static. Also mark rpadlpar_io_exit() as __exit. Link: https://lore.kernel.org/r/20200721151735.41181-1-weiyongjun1@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-06-26PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context()Rafael J. Wysocki
If context is not NULL in acpiphp_grab_context(), but the is_going_away flag is set for the device's parent, the reference counter of the context needs to be decremented before returning NULL or the context will never be freed, so make that happen. Fixes: edf5bf34d408 ("ACPI / dock: Use callback pointers from devices' ACPI hotplug contexts") Reported-by: Vasily Averin <vvs@virtuozzo.com> Cc: 3.15+ <stable@vger.kernel.org> # 3.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-08Merge tag 's390-5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Add support for multi-function devices in pci code. - Enable PF-VF linking for architectures using the pdev->no_vf_scan flag (currently just s390). - Add reipl from NVMe support. - Get rid of critical section cleanup in entry.S. - Refactor PNSO CHSC (perform network subchannel operation) in cio and qeth. - QDIO interrupts and error handling fixes and improvements, more refactoring changes. - Align ioremap() with generic code. - Accept requests without the prefetch bit set in vfio-ccw. - Enable path handling via two new regions in vfio-ccw. - Other small fixes and improvements all over the code. * tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits) vfio-ccw: make vfio_ccw_regops variables declarations static vfio-ccw: Add trace for CRW event vfio-ccw: Wire up the CRW irq and CRW region vfio-ccw: Introduce a new CRW region vfio-ccw: Refactor IRQ handlers vfio-ccw: Introduce a new schib region vfio-ccw: Refactor the unregister of the async regions vfio-ccw: Register a chp_event callback for vfio-ccw vfio-ccw: Introduce new helper functions to free/destroy regions vfio-ccw: document possible errors vfio-ccw: Enable transparent CCW IPL from DASD s390/pci: Log new handle in clp_disable_fh() s390/cio, s390/qeth: cleanup PNSO CHSC s390/qdio: remove q->first_to_kick s390/qdio: fix up qdio_start_irq() kerneldoc s390: remove critical section cleanup from entry.S s390: add machine check SIGP s390/pci: ioremap() align with generic code s390/ap: introduce new ap function ap_get_qdev() Documentation/s390: Update / remove developerWorks web links ...
2020-06-06Merge tag 'pci-v5.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Program MPS for RCiEP devices (Ashok Raj) - Fix pci_register_host_bridge() device_register() error handling (Rob Herring) - Fix pci_host_bridge struct device release/free handling (Rob Herring) Resource management: - Allow resizing BARs for devices on root bus (Ard Biesheuvel) Power management: - Reduce Thunderbolt resume time by working around devices that don't support DLL Link Active reporting (Mika Westerberg) - Work around a Pericom USB controller OHCI/EHCI PME# defect (Kai-Heng Feng) Virtualization: - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok Raj) - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner) - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven) Error handling: - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan) - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER events (Kuppuswamy Sathyanarayanan) - Don't enable AER by default in Kconfig (Bjorn Helgaas) Peer-to-peer DMA: - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher) ASPM: - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng) Endpoint framework: - Fix DMA channel release in test (Kunihiko Hayashi) - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar) - Add support to handle multiple base for mapping outbound memory (Lad Prabhakar) Generic host bridge driver: - Support building as module (Rob Herring) - Eliminate pci_host_common_probe wrappers (Rob Herring) Amlogic Meson PCIe controller driver: - Don't use FAST_LINK_MODE to set up link (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan) - Fix clk_put() error (Jim Quinlan) - Fix window register offset (Jim Quinlan) - Assert fundamental reset on initialization (Nicolas Saenz Julienne) - Add notify xHCI reset property (Nicolas Saenz Julienne) - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas Saenz Julienne) - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas Saenz Julienne) Cadence PCIe controller driver: - Remove "cdns,max-outbound-regions" DT property (replaced by "ranges") (Kishon Vijay Abraham I) - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT (Kishon Vijay Abraham I) Marvell Aardvark PCIe controller driver: - Improve link training (Marek Behún) - Add PHY support (Marek Behún) - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek Behún) - Train link immediately after enabling training to work around detection issues with some cards (Pali Rohár) - Issue PERST via GPIO to work around detection issues (Pali Rohár) - Don't blindly enable ASPM L0s (Pali Rohár) - Replace custom macros by standard linux/pci_regs.h macros (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix probe failure path to release resource (Wei Hu) - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu) Renesas R-Car PCIe controller driver: - Fix incorrect programming of OB windows (Andrew Murray) - Add suspend/resume (Kazufumi Ikeda) - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar) - Add endpoint controller driver (Lad Prabhakar) - Fix PCIEPAMR mask calculation (Lad Prabhakar) - Add r8a77961 to DT binding (Yoshihiro Shimoda) Socionext UniPhier Pro5 controller driver: - Add endpoint controller driver (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Program outbound ATU upper limit register (Alan Mikhak) - Fix inner MSI IRQ domain registration (Marc Zyngier) Miscellaneous: - Check for platform_get_irq() failure consistently (negative return means failure) (Aman Sharma) - Fix several runtime PM get/put imbalances (Dinghao Liu) - Use flexible-array and struct_size() helpers for code cleanup (Gustavo A. R. Silva) - Update & fix issues in bridge emulation of PCIe registers (Jon Derrick) - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc) (Krzysztof Wilczyński) - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)" * tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits) PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints PCI/DPC: Print IRQ number used by port PCI/AER: Use "aer" variable for capability offset PCI/AER: Remove redundant dev->aer_cap checks PCI/AER: Remove redundant pci_is_pcie() checks PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership PCI: tegra: Fix runtime PM imbalance on error PCI: vmd: Filter resource type bits from shadow register PCI: tegra194: Fix runtime PM imbalance on error dt-bindings: PCI: Add UniPhier PCIe endpoint controller description PCI: hv: Use struct_size() helper PCI: Rename _DSM constants to align with spec PCI: Avoid FLR for AMD Starship USB 3.0 PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0 x86/PCI: Drop unused xen_register_pirq() gsi_override parameter PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link PCI: dwc: Fix inner MSI IRQ domain registration PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname() ...
2020-06-02Merge tag 'acpi-5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20200430, fix several reference counting errors related to ACPI tables, add _Exx / _Lxx support to the GED driver, add a new acpi_evaluate_reg() helper, add new DPTF battery participant driver and extend the DPFT power participant driver, improve the handling of memory failures in the APEI code, add a blacklist entry to the backlight driver, update the PMIC driver and the processor idle driver, fix two kobject reference count leaks, and make a few janitory changes. Specifics: - Update the ACPICA code in the kernel to upstream revision 20200430: - Move acpi_gbl_next_cmd_num definition (Erik Kaneda). - Ignore AE_ALREADY_EXISTS status in the disassembler when parsing create operators (Erik Kaneda). - Add status checks to the dispatcher (Erik Kaneda). - Fix required parameters for _NIG and _NIH (Erik Kaneda). - Make acpi_protocol_lengths static (Yue Haibing). - Fix ACPI table reference counting errors in several places, mostly in error code paths (Hanjun Guo). - Extend the Generic Event Device (GED) driver to support _Exx and _Lxx handler methods (Ard Biesheuvel). - Add new acpi_evaluate_reg() helper and modify the ACPI PCI hotplug code to use it (Hans de Goede). - Add new DPTF battery participant driver and make the DPFT power participant driver create more sysfs device attributes (Srinivas Pandruvada). - Improve the handling of memory failures in APEI (James Morse). - Add new blacklist entry for Acer TravelMate 5735Z to the backlight driver (Paul Menzel). - Add i2c address for thermal control to the PMIC driver (Mauro Carvalho Chehab). - Allow the ACPI processor idle driver to work on platforms with only one ACPI C-state present (Zhang Rui). - Fix kobject reference count leaks in error code paths in two places (Qiushi Wu). - Delete unused proc filename macros and make some symbols static (Pascal Terjan, Zheng Zengkai, Zou Wei)" * tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) ACPI: CPPC: Fix reference count leak in acpi_cppc_processor_probe() ACPI: sysfs: Fix reference count leak in acpi_sysfs_add_hotplug_profile() ACPI: GED: use correct trigger type field in _Exx / _Lxx handling ACPI: DPTF: Add battery participant driver ACPI: DPTF: Additional sysfs attributes for power participant driver ACPI: video: Use native backlight on Acer TravelMate 5735Z arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work ACPI: APEI: Kick the memory_failure() queue for synchronous errors mm/memory-failure: Add memory_failure_queue_kick() ACPI / PMIC: Add i2c address for thermal control ACPI: GED: add support for _Exx / _Lxx handler methods ACPI: Delete unused proc filename macros ACPI: hotplug: PCI: Use the new acpi_evaluate_reg() helper ACPI: utils: Add acpi_evaluate_reg() helper ACPI: debug: Make two functions static ACPI: sleep: Put the FACS table after using it ACPI: scan: Put SPCR and STAO table after using it ACPI: EC: Put the ACPI table after using it ACPI: APEI: Put the HEST table for error path ACPI: APEI: Put the error record serialization table for error path ...
2020-05-21PCI: shpchp: Make shpchp_unconfigure_device() voidKrzysztof Wilczynski
shpchp_unconfigure_device() always returned 0, so there's no reason for a return value. In addition, remove_board() checked the return value for possible error which is unnecessary. Convert shpchp_unconfigure_device() to a void function and remove the return value check. This addresses the following Coccinelle warning: drivers/pci/hotplug/shpchp_pci.c:66:5-7: Unneeded variable: "rc". Return "0" on line 86 Link: https://lore.kernel.org/r/20200521190457.1066600-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit (git 2.34.1) at 2024-05-30 01:42:23 +0000