summaryrefslogtreecommitdiff
path: root/drivers/pci/iov.c
AgeCommit message (Collapse)Author
2018-02-06Merge tag 'pci-v4.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - skip AER driver error recovery callbacks for correctable errors reported via ACPI APEI, as we already do for errors reported via the native path (Tyler Baicar) - fix DPC shared interrupt handling (Alex Williamson) - print full DPC interrupt number (Keith Busch) - enable DPC only if AER is available (Keith Busch) - simplify DPC code (Bjorn Helgaas) - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn Helgaas) - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn Helgaas) - move ASPM internal interfaces out of public header (Bjorn Helgaas) - allow hot-removal of VGA devices (Mika Westerberg) - speed up unplug and shutdown by assuming Thunderbolt controllers don't support Command Completed events (Lukas Wunner) - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling, Jay Cornwall) - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes) - clean up PCI DMA interface usage (Christoph Hellwig) - remove PCI pool API (replaced with DMA pool) (Romain Perier) - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan Kaya) - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring) - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler) - remove warnings on sysfs mmap failure (Bjorn Helgaas) - quiet ROM validation messages (Alex Deucher) - remove redundant memory alloc failure messages (Markus Elfring) - fill in types for compile-time VGA and other I/O port resources (Bjorn Helgaas) - make "pci=pcie_scan_all" work for Root Ports as well as Downstream Ports to help AmigaOne X1000 (Bjorn Helgaas) - add SPDX tags to all PCI files (Bjorn Helgaas) - quirk Marvell 9128 DMA aliases (Alex Williamson) - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas) - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas Cassel) - use DMA API to get MSI address for DesignWare IP (Niklas Cassel) - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I) - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun) - add support for ARTPEC-7 SoC (Niklas Cassel) - add endpoint-mode support for ARTPEC (Niklas Cassel) - add Cadence PCIe host and endpoint controller driver (Cyrille Pitchen) - handle multiple INTx status bits being set in dra7xx (Vignesh R) - translate dra7xx hwirq range to fix INTD handling (Vignesh R) - remove deprecated Exynos PHY initialization code (Jaehoon Chung) - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu) - fix NULL pointer dereference in iProc BCMA driver (Ray Jui) - fix Keystone interrupt-controller-node lookup (Johan Hovold) - constify qcom driver structures (Julia Lawall) - rework Tegra config space mapping to increase space available for endpoints (Vidya Sagar) - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy) - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy) - add support for Global Fabric Manager Server (GFMS) event to Microsemi Switchtec switch driver (Logan Gunthorpe) - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao) * tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile PCI/DPC: Reformat DPC register definitions PCI/DPC: Add and use DPC Status register field definitions PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error() PCI/DPC: Remove unnecessary RP PIO register structs PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info() PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info() PCI/DPC: Make RP PIO log size check more generic PCI/DPC: Rename local "status" to "dpc_status" PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error() ...
2018-02-01Merge branch 'pci/spdx' into nextBjorn Helgaas
* pci/spdx: PCI: Add SPDX GPL-2.0+ to replace implicit GPL v2 or later statement PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplate PCI: Add SPDX GPL-2.0 to replace COPYING boilerplate PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate PCI: Add SPDX GPL-2.0 when no license was specified
2018-01-26PCI: Add SPDX GPL-2.0 when no license was specifiedBjorn Helgaas
b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") added SPDX GPL-2.0 to several PCI files that previously contained no license information. Add SPDX GPL-2.0 to all other PCI files that did not contain any license information and hence were under the default GPL version 2 license of the kernel. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-18PCI: Add wrappers for dev_printk()Frederick Lawler
Add PCI-specific dev_printk() wrappers and use them to simplify the code slightly. No functional change intended. Signed-off-by: Frederick Lawler <fred@fredlawl.com> [bhelgaas: squash into one patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-12-11PCI/IOV: Add pci_vf_drivers_autoprobe() interfaceBryant G. Ly
Add a pci_vf_drivers_autoprobe() interface. Setting autoprobe to false on the PF prevents drivers from binding to VFs when they are enabled. Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Russell Currey <ruscur@russell.cc> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-10PCI: Restore ARI Capable Hierarchy before setting numVFsTony Nguyen
In the restore path, we previously read PCI_SRIOV_VF_OFFSET and PCI_SRIOV_VF_STRIDE before restoring PCI_SRIOV_CTRL_ARI: pci_restore_state pci_restore_iov_state sriov_restore_state pci_iov_set_numvfs pci_read_config_word(... PCI_SRIOV_VF_OFFSET, &iov->offset) pci_read_config_word(... PCI_SRIOV_VF_STRIDE, &iov->stride) pci_write_config_word(... PCI_SRIOV_CTRL, iov->ctrl) But per SR-IOV r1.1, sec 3.3.3.5, the device can use PCI_SRIOV_CTRL_ARI to determine PCI_SRIOV_VF_OFFSET and PCI_SRIOV_VF_STRIDE. Therefore, this path, which is used for suspend/resume and AER recovery, can corrupt iov->offset and iov->stride. Since the iov state is associated with the device, not the driver, if we reload the driver, it will use the the corrupted data, which may cause crashes like this: kernel BUG at drivers/pci/iov.c:157! RIP: 0010:pci_iov_add_virtfn+0x2eb/0x350 Call Trace: pci_enable_sriov+0x353/0x440 ixgbe_pci_sriov_configure+0xd5/0x1f0 [ixgbe] sriov_numvfs_store+0xf7/0x170 dev_attr_store+0x18/0x30 sysfs_kf_write+0x37/0x40 kernfs_fop_write+0x120/0x1b0 vfs_write+0xb5/0x1a0 SyS_write+0x55/0xc0 Restore PCI_SRIOV_CTRL_ARI before calling pci_iov_set_numvfs(), then restore the rest of PCI_SRIOV_CTRL (which may set PCI_SRIOV_CTRL_VFE) afterwards. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> [bhelgaas: changelog, add comment, also clear ARI if necessary] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> CC: Emil Tantilov <emil.s.tantilov@intel.com>
2017-10-10PCI: Create SR-IOV virtfn/physfn links before attaching driverStuart Hayes
When creating virtual functions, create the "virtfn%u" and "physfn" links in sysfs *before* attaching the driver instead of after. When we attach the driver to the new virtual network interface first, there is a race when the driver attaches to the new sends out an "add" udev event, and the network interface naming software (biosdevname or systemd, for example) tries to look at these links. Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-10-05PCI: Cache the VF device ID in the SR-IOV structureFilippo Sironi
Cache the VF device ID in the SR-IOV structure and use it instead of reading it over and over from the PF config space capability. Signed-off-by: Filippo Sironi <sironi@amazon.de> [bhelgaas: rename to "vf_device" to match pci_dev->device] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-10-05PCI: Remove reset argument from pci_iov_{add,remove}_virtfn()Jan H. Schönherr
The "reset" argument passed to pci_iov_add_virtfn() and pci_iov_remove_virtfn() is always zero since 46cb7b1bd86f ("PCI: Remove unused SR-IOV VF Migration support") Remove the argument together with the associated code. Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Russell Currey <ruscur@russell.cc>
2017-08-29PCI: Disable VF decoding before pcibios_sriov_disable() updates resourcesGavin Shan
A struct resource represents the address space consumed by a device. We should not modify that resource while the device is actively using the address space. For VFs, pci_iov_update_resource() enforces this by printing a warning and doing nothing if the VFE (VF Enable) and MSE (VF Memory Space Enable) bits are set. Previously, both sriov_enable() and sriov_disable() called the pcibios_sriov_disable() arch hook, which may update the struct resource, while VFE and MSE were enabled. This effectively dropped the resource update pcibios_sriov_disable() intended to do. Disable VF memory decoding before calling pcibios_sriov_disable(). Reported-by: Carol L Soto <clsoto@us.ibm.com> Tested-by: Carol L Soto <clsoto@us.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: shan.gavin@gmail.com Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org>
2017-06-14PCI: Protect pci_driver->sriov_configure() usage with device_lock()Jakub Kicinski
Every method in struct device_driver or structures derived from it like struct pci_driver MUST provide exclusion vs the driver's ->remove() method, usually by using device_lock(). Protect use of pci_driver->sriov_configure() by holding the device lock while calling it. The PCI core sets the pci_dev->driver pointer in local_pci_probe() before calling ->probe() and only clears it after ->remove(). This means driver's ->sriov_configure() callback will happily race with probe() and remove(), most likely leading to BUGs, since drivers don't expect this. Remove the iov lock completely, since we remove the last user. [bhelgaas: changelog, thanks to Christoph for locking rule] Link: http://lkml.kernel.org/r/20170522225023.14010-1-jakub.kicinski@netronome.com Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-04-20PCI: Add sysfs sriov_drivers_autoprobe to control VF driver bindingBodong Wang
Sometimes it is not desirable to bind SR-IOV VFs to drivers. This can save host side resource usage by VF instances that will be assigned to VMs. Add a new PCI sysfs interface "sriov_drivers_autoprobe" to control that from the PF. To modify it, echo 0/n/N (disable probe) or 1/y/Y (enable probe) to: /sys/bus/pci/devices/<DOMAIN:BUS:DEVICE.FUNCTION>/sriov_drivers_autoprobe Note that this must be done before enabling VFs. The change will not take effect if VFs are already enabled. Simply, one can disable VFs by setting sriov_numvfs to 0, choose whether to probe or not, and then re-enable the VFs by restoring sriov_numvfs. [bhelgaas: changelog, ABI doc] Signed-off-by: Bodong Wang <bodong@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
2017-02-03PCI: Lock each enable/disable num_vfs operation in sysfsEmil Tantilov
Enabling/disabling SRIOV via sysfs by echo-ing multiple values simultaneously: # echo 63 > /sys/class/net/ethX/device/sriov_numvfs& # echo 63 > /sys/class/net/ethX/device/sriov_numvfs # sleep 5 # echo 0 > /sys/class/net/ethX/device/sriov_numvfs& # echo 0 > /sys/class/net/ethX/device/sriov_numvfs results in the following bug: kernel BUG at drivers/pci/iov.c:495! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 8050 Comm: bash Tainted: G W 4.9.0-rc7-net-next #2092 RIP: 0010:[<ffffffff813b1647>] [<ffffffff813b1647>] pci_iov_release+0x57/0x60 Call Trace: [<ffffffff81391726>] pci_release_dev+0x26/0x70 [<ffffffff8155be6e>] device_release+0x3e/0xb0 [<ffffffff81365ee7>] kobject_cleanup+0x67/0x180 [<ffffffff81365d9d>] kobject_put+0x2d/0x60 [<ffffffff8155bc27>] put_device+0x17/0x20 [<ffffffff8139c08a>] pci_dev_put+0x1a/0x20 [<ffffffff8139cb6b>] pci_get_dev_by_id+0x5b/0x90 [<ffffffff8139cca5>] pci_get_subsys+0x35/0x40 [<ffffffff8139ccc8>] pci_get_device+0x18/0x20 [<ffffffff8139ccfb>] pci_get_domain_bus_and_slot+0x2b/0x60 [<ffffffff813b09e7>] pci_iov_remove_virtfn+0x57/0x180 [<ffffffff813b0b95>] pci_disable_sriov+0x65/0x140 [<ffffffffa00a1af7>] ixgbe_disable_sriov+0xc7/0x1d0 [ixgbe] [<ffffffffa00a1e9d>] ixgbe_pci_sriov_configure+0x3d/0x170 [ixgbe] [<ffffffff8139d28c>] sriov_numvfs_store+0xdc/0x130 ... RIP [<ffffffff813b1647>] pci_iov_release+0x57/0x60 Use the existing mutex lock to protect each enable/disable operation. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> CC: Alexander Duyck <alexander.h.duyck@intel.com>
2016-11-29PCI: Remove pci_resource_bar() and pci_iov_resource_bar()Bjorn Helgaas
pci_std_update_resource() only deals with standard BARs, so we don't have to worry about the complications of VF BARs in an SR-IOV capability. Compute the BAR address inline and remove pci_resource_bar(). That makes pci_iov_resource_bar() unused, so remove that as well. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
2016-11-29PCI: Don't update VF BARs while VF memory space is enabledBjorn Helgaas
If we update a VF BAR while it's enabled, there are two potential problems: 1) Any driver that's using the VF has a cached BAR value that is stale after the update, and 2) We can't update 64-bit BARs atomically, so the intermediate state (new lower dword with old upper dword) may conflict with another device, and an access by a driver unrelated to the VF may cause a bus error. Warn about attempts to update VF BARs while they are enabled. This is a programming error, so use dev_WARN() to get a backtrace. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
2016-11-29PCI: Separate VF BAR updates from standard BAR updatesBjorn Helgaas
Previously pci_update_resource() used the same code path for updating standard BARs and VF BARs in SR-IOV capabilities. Split the VF BAR update into a new pci_iov_update_resource() internal interface, which makes it simpler to compute the BAR address (we can get rid of pci_resource_bar() and pci_iov_resource_bar()). This patch: - Renames pci_update_resource() to pci_std_update_resource(), - Adds pci_iov_update_resource(), - Makes pci_update_resource() a wrapper that calls the appropriate one, No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
2016-11-23PCI: Do any VF BAR updates before enabling the BARsGavin Shan
Previously we enabled VFs and enable their memory space before calling pcibios_sriov_enable(). But pcibios_sriov_enable() may update the VF BARs: for example, on PPC PowerNV we may change them to manage the association of VFs to PEs. Because 64-bit BARs cannot be updated atomically, it's unsafe to update them while they're enabled. The half-updated state may conflict with other devices in the system. Call pcibios_sriov_enable() before enabling the VFs so any BAR updates happen while the VF BARs are disabled. [bhelgaas: changelog] Tested-by: Carol Soto <clsoto@us.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-12PCI: Check for pci_setup_device() failure in pci_iov_add_virtfn()Po Liu
If pci_setup_device() returns failure, we must return failure from pci_iov_add_virtfn(). If we ignore the failure and continue with an uninitialized pci_dev for virtfn, we crash later when we try to use those uninitialized parts. Signed-off-by: Po Liu <po.liu@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-19Merge tag 'powerpc-4.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "This was delayed a day or two by some build-breakage on old toolchains which we've now fixed. There's two PCI commits both acked by Bjorn. There's one commit to mm/hugepage.c which is (co)authored by Kirill. Highlights: - Restructure Linux PTE on Book3S/64 to Radix format from Paul Mackerras - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh Kumar K.V - Add POWER9 cputable entry from Michael Neuling - FPU/Altivec/VSX save/restore optimisations from Cyril Bur - Add support for new ftrace ABI on ppc64le from Torsten Duwe Various cleanups & minor fixes from: - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy, Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh. General: - atomics: Allow architectures to define their own __atomic_op_* helpers from Boqun Feng - Implement atomic{, 64}_*_return_* variants and acquire/release/ relaxed variants for (cmp)xchg from Boqun Feng - Add powernv_defconfig from Jeremy Kerr - Fix BUG_ON() reporting in real mode from Balbir Singh - Add xmon command to dump OPAL msglog from Andrew Donnellan - Add xmon command to dump process/task similar to ps(1) from Douglas Miller - Clean up memory hotplug failure paths from David Gibson pci/eeh: - Redesign SR-IOV on PowerNV to give absolute isolation between VFs from Wei Yang. - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan. - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang - PCI: Add pcibios_bus_add_device() weak function from Wei Yang - MAINTAINERS: Update EEH details and maintainership from Russell Currey cxl: - Support added to the CXL driver for running on both bare-metal and hypervisor systems, from Christophe Lombard and Frederic Barrat. - Ignore probes for virtual afu pci devices from Vaibhav Jain perf: - Export Power8 generic and cache events to sysfs from Sukadev Bhattiprolu - hv-24x7: Fix usage with chip events, display change in counter values, display domain indices in sysfs, eliminate domain suffix in event names, from Sukadev Bhattiprolu Freescale: - Updates from Scott: "Highlights include 8xx optimizations, 32-bit checksum optimizations, 86xx consolidation, e5500/e6500 cpu hotplug, more fman and other dt bits, and minor fixes/cleanup" * tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits) powerpc: Fix unrecoverable SLB miss during restore_math() powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers powerpc/rcpm: Fix build break when SMP=n powerpc/book3e-64: Use hardcoded mttmr opcode powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible powerpc/T104xRDB: add tdm riser card node to device tree powerpc32: PAGE_EXEC required for inittext powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s) powerpc/86xx: Introduce and use common dtsi powerpc/86xx: Update device tree powerpc/86xx: Move dts files to fsl directory powerpc/86xx: Switch to kconfig fragments approach powerpc/86xx: Update defconfigs powerpc/86xx: Consolidate common platform code powerpc32: Remove one insn in mulhdu powerpc32: small optimisation in flush_icache_range() powerpc: Simplify test in __dma_sync() powerpc32: move xxxxx_dcache_range() functions inline powerpc32: Remove clear_pages() and define clear_page() inline ...
2016-03-09PCI/IOV: Rename and export virtfn_{add, remove}Wei Yang
During EEH recovery, hotplug is applied to the devices which don't have drivers or their drivers don't support EEH. However, the hotplug, which was implemented based on PCI bus, can't be applied to VF directly. Instead, we unplug and plug individual PCI devices (VFs). This renames virtn_{add,remove}() and exports them so they can be used in PCI hotplug during EEH recovery. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-29PCI: Support SR-IOV on any function typeKelly Zytaruk
Previously, we only supported SR-IOV on PCI Express Endpoints and Root Complex Integrated Endpoints. This restriction has been present since d1b054da8f59 ("PCI: initialize and release SR-IOV capability") added SR-IOV support, but the spec does not require it. In fact, the SR-IOV spec r1.1, sec 3.3, says the SR-IOV extended capability may be present for any Type 0 function. Remove the function type test, so we can support SR-IOV on any function. Some AMD GPUs have display outputs, use the VGA class code, are Legacy Endpoints, and support SR-IOV. This change allows Linux to enable SR-IOV on these devices. [bhelgaas: changelog] Link: https://bugzilla.kernel.org/show_bug.cgi?id=112221 Signed-off-by: Kelly Zytaruk <kelly.zytaruk@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-11-02Merge branches 'pci/aer', 'pci/hotplug', 'pci/misc', 'pci/msi', ↵Bjorn Helgaas
'pci/resource' and 'pci/virtualization' into next * pci/aer: PCI/AER: Clear error status registers during enumeration and restore * pci/hotplug: PCI: pciehp: Queue power work requests in dedicated function * pci/misc: PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum x86/PCI: Make pci_subsys_init() static PCI: Add builtin_pci_driver() to avoid registration boilerplate PCI: Remove unnecessary "if" statement * pci/msi: x86/PCI: Don't alloc pcibios-irq when MSI is enabled PCI/MSI: Export all remapped MSIs to sysfs attributes PCI: Disable MSI on SiS 761 * pci/resource: sparc/PCI: Add mem64 resource parsing for root bus PCI: Expand Enhanced Allocation BAR output PCI: Make Enhanced Allocation bitmasks more obvious PCI: Handle Enhanced Allocation capability for SR-IOV devices PCI: Add support for Enhanced Allocation devices PCI: Add Enhanced Allocation register entries PCI: Handle IORESOURCE_PCI_FIXED when assigning resources PCI: Handle IORESOURCE_PCI_FIXED when sizing resources PCI: Clear IORESOURCE_UNSET when reverting to firmware-assigned address * pci/virtualization: PCI: Fix sriov_enable() error path for pcibios_enable_sriov() failures PCI: Wait 1 second between disabling VFs and clearing NumVFs PCI: Reorder pcibios_sriov_disable() PCI: Remove VFs in reverse order if virtfn_add() fails PCI: Remove redundant validation of SR-IOV offset/stride registers PCI: Set SR-IOV NumVFs to zero after enumeration PCI: Enable SR-IOV ARI Capable Hierarchy before reading TotalVFs PCI: Don't try to restore VF BARs
2015-10-30PCI: Fix sriov_enable() error path for pcibios_enable_sriov() failuresAlexander Duyck
Disable VFs if pcibios_enable_sriov() fails, just like we do for other errors in sriov_enable(). Call pcibios_sriov_disable() if virtfn_add() fails. [bhelgaas: changelog, split to separate patch for reviewability] Fixes: 995df527f399 ("PCI: Add pcibios_sriov_enable() and pcibios_sriov_disable()") Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Yang <weiyang@linux.vnet.ibm.com>
2015-10-30PCI: Wait 1 second between disabling VFs and clearing NumVFsAlexander Duyck
Per sec 3.3.3.1 of the SR-IOV spec, r1.1, we must allow 1.0s after clearing VF Enable before reading any field in the SR-IOV Extended Capability. Wait 1 second before calling pci_iov_set_numvfs(), which reads PCI_SRIOV_VF_OFFSET and PCI_SRIOV_VF_STRIDE after it sets PCI_SRIOV_NUM_VF. [bhelgaas: split to separate patch for reviewability, add spec reference] Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-30PCI: Reorder pcibios_sriov_disable()Alexander Duyck
Move pcibios_sriov_disable() up so it's defined before a future use. [bhelgaas: split to separate patch for reviewability] Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Yang <weiyang@linux.vnet.ibm.com>
2015-10-30PCI: Remove VFs in reverse order if virtfn_add() failsAlexander Duyck
If virtfn_add() fails, we call virtfn_remove() for any previously added devices. Remove the devices in reverse order (first-added is last-removed), which is more natural and doesn't require an additional variable. [bhelgaas: changelog, split to separate patch for reviewability] Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Yang <weiyang@linux.vnet.ibm.com>
2015-10-29PCI: Handle Enhanced Allocation capability for SR-IOV devicesDavid Daney
SR-IOV BARs can be specified via EA entries. Extend the EA parser to extract the SRIOV BAR resources, and modify sriov_init() to use resources previously obtained via EA. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sean O. Stalley <sean.stalley@intel.com>
2015-10-29PCI: Remove redundant validation of SR-IOV offset/stride registersAlexander Duyck
Previously, we read, validated, and cached PCI_SRIOV_VF_OFFSET and PCI_SRIOV_VF_STRIDE in sriov_enable(). But sriov_init() now does that via compute_max_vf_buses(), so we don't need to do it again. Remove the PCI_SRIOV_VF_OFFSET and PCI_SRIOV_VF_STRIDE config reads from sriov_enable(). The pci_sriov structure already contains the offset and stride corresponding to the current NumVFs. [bhelgaas: split to separate patch for reviewability] Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wei Yang <weiyang@linux.vnet.ibm.com>
2015-10-29PCI: Set SR-IOV NumVFs to zero after enumerationAlexander Duyck
The enumeration path should leave NumVFs set to zero. But after 4449f079722c ("PCI: Calculate maximum number of buses required for VFs"), we call virtfn_max_buses() in the enumeration path, which changes NumVFs. This NumVFs change is visible via lspci and sysfs until a driver enables SR-IOV. Iterate from TotalVFs down to zero so NumVFs is zero when we're finished computing the maximum number of buses. Validate offset and stride in the loop, so we can test it at every possible NumVFs setting. Rename virtfn_max_buses() to compute_max_vf_buses() to hint that it does have a side effect of updating iov->max_VF_buses. [bhelgaas: changelog, rename, allow numVF==1 && stride==0, rework loop, reverse sense of error path] Fixes: 4449f079722c ("PCI: Calculate maximum number of buses required for VFs") Based-on-patch-by: Ethan Zhao <ethan.zhao@oracle.com> Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-29PCI: Enable SR-IOV ARI Capable Hierarchy before reading TotalVFsBen Shelton
For some SR-IOV devices, the number of available virtual functions, i.e., TotalVFs, increases after setting the ARI Capable Hierarchy bit in the SR-IOV Control register. This violates the SR-IOV spec, r1.1, sec 3.3.6, which says TotalVFs is HwInit, but we don't need TotalVFs before setting the ARI Capable bit anyway. Set the ARI Capable Hierarchy bit (if ARI is enabled in the upstream bridge) before reading TotalVFs. [bhelgaas: changelog] Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-03-31PCI: Add pcibios_iov_resource_alignment() interfaceWei Yang
Per the SR-IOV spec r1.1, sec 3.3.14, the required alignment of a PF's IOV BAR is the size of an individual VF BAR, and the size consumed is the individual VF BAR size times NumVFs. The PowerNV platform has additional alignment requirements to help support its Partitionable Endpoint device isolation feature (see Documentation/powerpc/pci_iov_resource_on_powernv.txt). Add a pcibios_iov_resource_alignment() interface to allow platforms to request additional alignment. [bhelgaas: changelog, adapt to reworked pci_sriov_resource_alignment(), drop "align" parameter] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31PCI: Add pcibios_sriov_enable() and pcibios_sriov_disable()Wei Yang
VFs are dynamically created when a driver enables them. On some platforms, like PowerNV, special resources are necessary to enable VFs. Add platform hooks for enabling and disabling VFs. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31PCI: Export pci_iov_virtfn_bus() and pci_iov_virtfn_devfn()Wei Yang
On PowerNV, some resource reservation is needed for SR-IOV VFs that don't exist at the bootup stage. To do the match between resources and VFs, the code need to get the VF's BDF in advance. Rename virtfn_bus() and virtfn_devfn() to pci_iov_virtfn_bus() and pci_iov_virtfn_devfn() and export them. [bhelgaas: changelog, make "busnr" int] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31PCI: Calculate maximum number of buses required for VFsWei Yang
An SR-IOV device can change its First VF Offset and VF Stride based on the values of ARI Capable Hierarchy and NumVFs. The number of buses required for all VFs is determined by NumVFs, First VF Offset, and VF Stride (see SR-IOV spec r1.1, sec 2.1.2). Previously pci_iov_bus_range() computed how many buses would be required by TotalVFs, but this was based on a single NumVFs value and may not have been the maximum for all NumVFs configurations. Iterate over all valid NumVFs and calculate the maximum number of bus numbers that could ever be required for VFs of this device. [bhelgaas: changelog, compute busnr of NumVFs, not TotalVFs, remove kerenl-doc comment marker] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31PCI: Refresh First VF Offset and VF Stride when updating NumVFsWei Yang
The First VF Offset and VF Stride fields depend on the NumVFs setting, so refresh the cached fields in struct pci_sriov when updating NumVFs. See the SR-IOV spec r1.1, sec 3.3.9 and 3.3.10. [bhelgaas: changelog, remove kernel-doc comment marker] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31PCI: Index IOV resources in the conventional styleBjorn Helgaas
Most of PCI uses "res = &dev->resource[i]", not "res = dev->resource + i". Use that style in iov.c also. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31PCI: Keep individual VF BAR size in struct pci_sriovWei Yang
Currently we don't store the individual VF BAR size. We calculate it when needed by dividing the PF's IOV resource size (which contains space for *all* the VFs) by total_VFs or by reading the BAR in the SR-IOV capability again. Keep the individual VF BAR size in struct pci_sriov.barsz[], add pci_iov_resource_size() to retrieve it, and use that instead of doing the division or reading the SR-IOV capability BAR. [bhelgaas: rename to "barsz[]", simplify barsz[] index computation, remove SR-IOV capability BAR sizing] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31PCI: Print PF SR-IOV resource that contains all VF(n) BAR spaceWei Yang
When we size VF BAR0, VF BAR1, etc., from the SR-IOV Capability of a PF, we learn the alignment requirement and amount of space consumed by a single VF. But when VFs are enabled, *each* of the NumVFs consumes that amount of space, so the total size of the PF resource is "VF BAR size * NumVFs". Add a printk of the total space consumed by the VFs corresponding to what we already do for normal non-IOV BARs. No functional change; new message only. [bhelgaas: split out into its own patch] Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31PCI: Print more info in sriov_enable() error messageBjorn Helgaas
If we don't have space for all the bus numbers required to enable VFs, print the largest bus number required and the range available. No functional change; improved error message only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-11-19PCI: Remove fixed parameter in pci_iov_resource_bar()Myron Stowe
pci_iov_resource_bar() always sets its 'pci_bar_type' parameter to 'pci_bar_unknown'. Drop the parameter and just use 'pci_bar_unknown' directly in the callers. No functional change intended. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Chris Wright <chrisw@sous-sol.org> CC: Yu Zhao <yuzhao@google.com>
2014-09-16PCI: Use device flag helper functionsEthan Zhao
Use PCI device flag helper functions when checking whether a device is assigned. No functional change. Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-05-30PCI: Make pci_bus_add_device() voidYijing Wang
pci_bus_add_device() always returns 0, so there's no point in returning anything at all. Make it a void function and remove the tests of the return value from the callers. [bhelgaas: changelog, remove unused "err" from i82875p_setup_overfl_dev()] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-19PCI: Remove unused SR-IOV VF Migration supportBjorn Helgaas
This reverts commit 74bb1bcc7dbb ("PCI: handle SR-IOV Virtual Function Migration"), removing this exported interface: pci_sriov_migration() Since pci_sriov_migration() is unused, it is impossible to schedule sriov_migration_task() or use any of the other migration infrastructure. This is based on Stephen Hemminger's patch (see link below), but goes a bit further. Link: http://lkml.kernel.org/r/20131227132710.7190647c@nehalam.linuxnetplumber.net Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Stephen Hemminger <stephen@networkplumber.org>
2014-01-10PCI: Never treat a VF as a multifunction deviceAlex Williamson
Per the SR-IOV spec rev 1.1: 3.4.1.9 Header Type (Offset 0Eh) "... For VFs, this register must be RO Zero." Unfortunately some devices get this wrong, ex. Emulex OneConnect 10Gb NIC. When they do it makes us handle ACS testing and therefore IOMMU groups as if they were actual multifunction devices and require ACS capabilities to make sure there's no peer-to-peer between functions. VFs are never traditional multifunction devices, so simply clear this bit before we get any further into setup. Link: https://bugzilla.kernel.org/show_bug.cgi?id=68431 Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-11-22PCI: Clear NumVFs when disabling SR-IOV in sriov_init()ethan.zhao
When SR-IOV is disabled (VF Enable is cleared), NumVFs is not very useful, so this patch clears it out to prevent confusing lspci output like that below. We already clear NumVFs in sriov_disable(), and this does the same when we disable SR-IOV as part of parsing the SR-IOV capability. $ lspci -vvv -s 13:00.0 13:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01) Capabilities: [160 v1] Single Root I/O Virtualization (SR-IOV) IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+ Initial VFs: 64, Total VFs: 64, Number of VFs: 64, ... [bhelgaas: changelog] Signed-off-by: ethan.zhao <ethan.kernel@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-11-14PCI: Fix whitespace, capitalization, and spelling errorsBjorn Helgaas
Fix whitespace, capitalization, and spelling errors. No functional change. I know "busses" is not an error, but "buses" was more common, so I used it consistently. Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus()) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-31PCI: Return -ENOSYS for SR-IOV operations on non-SR-IOV devicesStefan Assmann
Change the return value to -ENOSYS if a device is not an SR-IOV PF. Previously we returned either -ENODEV or -EINVAL. Also have pci_sriov_get_totalvfs() return 0 in the error case to make the behaviour consistent whether CONFIG_PCI_IOV is enabled or not. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-07-30PCI: Update NumVFs register when disabling SR-IOVYijing Wang
Currently, we only update NumVFs register during sriov_enable(). This register should also be updated during sriov_disable() and when sriov_enable() fails. Otherwise, we will get the stale "Number of VFs" info from lspci. [bhelgaas: changelog] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-07-25PCI: Fix comment typo in iov.cJonghwan Choi
"Devic3" should be "device." Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-14Merge branch 'pci/jiang-bus-lock-v3' into nextBjorn Helgaas
* pci/jiang-bus-lock-v3: PCI: Return early on allocation failures to unindent mainline code PCI: Simplify IOV implementation and fix reference count races PCI: Drop redundant setting of bus->is_added in virtfn_add_bus() unicore32/PCI: Remove redundant call of pci_bus_add_devices() m68k/PCI: Remove redundant call of pci_bus_add_devices() PCI: Rename pci_release_bus_bridge_dev() to pci_release_host_bridge_dev() PCI: Fix refcount issue in pci_create_root_bus() error recovery path ia64/PCI: Clean up pci_scan_root_bus() usage PCI: Convert alloc_pci_dev(void) to pci_alloc_dev(bus) PCI: Introduce pci_alloc_dev(struct pci_bus*) to replace alloc_pci_dev() PCI: Introduce pci_bus_{get|put}() to manage PCI bus reference count Conflicts: drivers/pci/probe.c
generated by cgit (git 2.34.1) at 2024-05-13 18:48:24 +0000