summaryrefslogtreecommitdiff
path: root/drivers/pci/pci.h
AgeCommit message (Collapse)Author
2020-08-05Merge branch 'pci/host-probe-refactor'Bjorn Helgaas
- Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Convert to devm_platform_ioremap_resource_byname() instead of open-coding platform_get_resource_byname() and devm_ioremap_resource() for altera, cadence, mediatek, rockchip, tegra, xgene (Dejin Zheng) - Convert to devm_platform_ioremap_resource() instead of open-coding platform_get_resource() and devm_ioremap_resource() for aardvark, brcmstb, exynos, ftpci100, versatile (Dejin Zheng) - Remove redundant error messages from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Drop useless PCI_ENABLE_PROC_DOMAINS from versatile driver (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Drop unnecessary zeroing of host bridge fields (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Use bridge resources instead of parsing DT 'ranges' again for cadence (Rob Herring) - Remove private bus number and range from cadence (Rob Herring) - Use devm_pci_alloc_host_bridge() to simplify rcar (Rob Herring) - Use struct pci_host_bridge.windows list directly rather than a temporary (Rob Herring) - Reduce OF "missing non-prefetchable window" from error to warning message (Rob Herring) - Convert rcar-gen2 from old Arm-specific pci_common_init_dev() to new arch-independent interfaces (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) * pci/host-probe-refactor: PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: of: Reduce missing non-prefetchable memory region to a warning PCI: rcar: Use struct pci_host_bridge.windows list directly PCI: rcar: Use devm_pci_alloc_host_bridge() PCI: cadence: Remove private bus number and range storage PCI: cadence: Use bridge resources for outbound window setup PCI: Move setting pci_host_bridge.busnr out of host drivers PCI: rcar: Use pci_is_root_bus() to check if bus is root bus PCI: rockchip: Use pci_is_root_bus() to check if bus is root bus PCI: xilinx: Use pci_is_root_bus() to check if bus is root bus PCI: xilinx-nwl: Use pci_is_root_bus() to check if bus is root bus PCI: mobiveil: Use pci_is_root_bus() to check if bus is root bus PCI: designware: Use pci_is_root_bus() to check if bus is root bus PCI: aardvark: Use pci_is_root_bus() to check if bus is root bus PCI: Drop unnecessary zeroing of bridge fields PCI: Set default bridge parent device PCI: versatile: Drop flag PCI_ENABLE_PROC_DOMAINS PCI: controller: Remove duplicate error message PCI: controller: Convert to devm_platform_ioremap_resource() PCI: controller: Convert to devm_platform_ioremap_resource_byname() PCI: xilinx: Use pci_host_probe() to register host PCI: xilinx-nwl: Use pci_host_probe() to register host PCI: rockchip: Use pci_host_probe() to register host PCI: rcar: Use pci_host_probe() to register host PCI: iproc: Use pci_host_probe() to register host PCI: altera: Use pci_host_probe() to register host PCI: xgene: Use pci_host_probe() to register host PCI: versatile: Use pci_host_probe() to register host PCI: v3: Use pci_host_probe() to register host PCI: tegra: Use pci_host_probe() to register host PCI: mobiveil: Use pci_host_probe() to register host PCI: brcmstb: Use pci_host_probe() to register host PCI: host-common: Use struct pci_host_bridge.windows list directly PCI: mvebu: Use struct pci_host_bridge.windows list directly PCI: cadence: Use struct pci_host_bridge.windows list directly # Conflicts: # drivers/pci/controller/cadence/pcie-cadence-host.c
2020-08-05Merge branch 'pci/error'Bjorn Helgaas
- Use pci_channel_state_t instead of enum pci_channel_state (Luc Van Oostenryck) - Simplify __aer_print_error() (Bjorn Helgaas) - Log AER correctable errors as warning, not error (Matt Jolly) - Rename pci_aer_clear_device_status() to pcie_clear_device_status() (Bjorn Helgaas) - Clear PCIe Device Status errors only if OS owns AER (Jonathan Cameron) * pci/error: PCI/ERR: Clear PCIe Device Status errors only if OS owns AER PCI/ERR: Rename pci_aer_clear_device_status() to pcie_clear_device_status() PCI/AER: Log correctable errors as warning, not error PCI/AER: Simplify __aer_print_error() PCI: Use 'pci_channel_state_t' instead of 'enum pci_channel_state'
2020-08-04PCI: Move DT resource setup into devm_pci_alloc_host_bridge()Rob Herring
Now that pci_parse_request_of_pci_ranges() callers just setup pci_host_bridge.windows and dma_ranges directly and don't need the bus range returned, we can just initialize them when allocating the pci_host_bridge struct. With this, pci_parse_request_of_pci_ranges() becomes a static function. Link: https://lore.kernel.org/r/20200722022514.1283916-19-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2020-07-22PCI/ERR: Rename pci_aer_clear_device_status() to pcie_clear_device_status()Bjorn Helgaas
pci_aer_clear_device_status() clears the error bits in the PCIe Device Status Register (PCI_EXP_DEVSTA). Every PCIe device has this register, regardless of whether it supports AER. Rename pci_aer_clear_device_status() to pcie_clear_device_status() to make clear that it is PCIe-specific but not AER-specific. Move it to drivers/pci/pci.c, again since it's not AER-specific. No functional change intended. Link: https://lore.kernel.org/r/20200717195619.766662-1-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-10PCI: Cache ACS capability offset in deviceRajat Jain
Currently the ACS capability is being looked up at a number of places. Read and store it once at enumeration so that it can be used by all later. No functional change intended. Link: https://lore.kernel.org/r/20200707224604.3737893-2-rajatja@google.com Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-07PCI: Use 'pci_channel_state_t' instead of 'enum pci_channel_state'Luc Van Oostenryck
The method struct pci_error_handlers.error_detected() is defined and documented as taking an 'enum pci_channel_state' for the second argument, but most drivers use 'pci_channel_state_t' instead. This 'pci_channel_state_t' is not a typedef for the enum but a typedef for a bitwise type in order to have better/stricter typechecking. Consolidate everything by using 'pci_channel_state_t' in the method's definition, in the related helpers and in the drivers. Enforce use of 'pci_channel_state_t' by replacing 'enum pci_channel_state' with an anonymous 'enum'. Note: Currently, from a typechecking point of view this patch changes nothing because only the constants defined by the enum are bitwise, not the enum itself (sparse doesn't have the notion of 'bitwise enum'). This may change in some not too far future, hence the patch. [bhelgaas: squash in https://lore.kernel.org/r/20200702162651.49526-3-luc.vanoostenryck@gmail.com https://lore.kernel.org/r/20200702162651.49526-4-luc.vanoostenryck@gmail.com] Link: https://lore.kernel.org/r/20200702162651.49526-2-luc.vanoostenryck@gmail.com Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-04-02Merge branch 'pci/enumeration'Bjorn Helgaas
- Add PCIe 32 GT/s speed decoding for sysfs "max_link_speed" and dmesg notes about available bandwidth (Yicong Yang) - Simplify and unify PCI bus/link speed reporting (Yicong Yang) * pci/enumeration: PCI: Add PCIE_LNKCAP2_SLS2SPEED() macro PCI: Use pci_speed_string() for all PCI/PCI-X/PCIe strings PCI: Add pci_speed_string() PCI: Add 32 GT/s decoding in some macros
2020-03-28PCI/AER: Rationalize error status register clearingKuppuswamy Sathyanarayanan
The AER interfaces to clear error status registers were a confusing mess: - pci_cleanup_aer_uncorrect_error_status() cleared non-fatal errors from the Uncorrectable Error Status register. - pci_aer_clear_fatal_status() cleared fatal errors from the Uncorrectable Error Status register. - pci_cleanup_aer_error_status_regs() cleared the Root Error Status register (for Root Ports), the Uncorrectable Error Status register, and the Correctable Error Status register. Rename them to make them consistent: From To ---------------------------------------- ------------------------------- pci_cleanup_aer_uncorrect_error_status() pci_aer_clear_nonfatal_status() pci_aer_clear_fatal_status() pci_aer_clear_fatal_status() pci_cleanup_aer_error_status_regs() pci_aer_clear_status() Since pci_cleanup_aer_error_status_regs() (renamed to pci_aer_clear_status()) is only used within drivers/pci/, move the declaration from <linux/aer.h> to drivers/pci/pci.h. [bhelgaas: commit log, add renames] Link: https://lore.kernel.org/r/d1310a75dc3d28f7e8da4e99c45fbd3e60fe238e.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/DPC: Expose dpc_process_error(), dpc_reset_link() for use by EDRKuppuswamy Sathyanarayanan
If firmware controls DPC, it is generally responsible for managing the DPC capability and events, and the OS should not access the DPC capability. However, if firmware controls DPC and both the OS and the platform support Error Disconnect Recover (EDR) notifications, the OS EDR notify handler is responsible for recovery, and the notify handler may read/write the DPC capability until it clears the DPC Trigger Status bit. See [1], sec 4.5.1, table 4-6. Expose some DPC error handling functions so they can be used by the EDR notify handler. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 Link: https://lore.kernel.org/r/e9000bb15b3a4293e81d98bb29ead7c84a6393c9.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/AER: Add pci_aer_raw_clear_status() to unconditionally clear Error StatusKuppuswamy Sathyanarayanan
Per the SFI _OSC and DPC Updates ECN [1] implementation note flowchart, the OS seems to be expected to clear AER status even if it doesn't have ownership of the AER capability. Unlike the DPC capability, where a DPC ECN [2] specifies a window when the OS is allowed to access DPC registers even if it doesn't have ownership, there is no clear model for AER. Add pci_aer_raw_clear_status() to clear the AER error status registers unconditionally. This is intended for use only by the EDR path (see [2]). [1] System Firmware Intermediary (SFI) _OSC and DPC Updates ECN, Feb 24, 2020, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/14076 [2] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 [bhelgaas: changelog] Link: https://lore.kernel.org/r/c19ad28f3633cce67448609e89a75635da0da07d.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/DPC: Cache DPC capabilities in pci_init_capabilities()Kuppuswamy Sathyanarayanan
Since Error Disconnect Recover needs to use DPC error handling routines even if the OS doesn't have control of DPC, move the initalization and caching of DPC capabilities from the DPC driver to pci_init_capabilities(). Link: https://lore.kernel.org/r/5888380657c8b9551675b5dbd48e370e4fd2703d.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/ERR: Return status of pcie_do_recovery()Kuppuswamy Sathyanarayanan
As per the DPC Enhancements ECN [1], sec 4.5.1, table 4-4, if the OS supports Error Disconnect Recover (EDR), it must invalidate the software state associated with child devices of the port without attempting to access the child device hardware. In addition, if the OS supports DPC, it must attempt to recover the child devices if the port implements the DPC Capability. If the OS continues operation, the OS must inform the firmware of the status of the recovery operation via the _OST method. Return the result of pcie_do_recovery() so we can report it to firmware via _OST. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 Link: https://lore.kernel.org/r/eb60ec89448769349c6722954ffbf2de163155b5.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-28PCI/ERR: Remove service dependency in pcie_do_recovery()Kuppuswamy Sathyanarayanan
Previously we passed the PCIe service type parameter to pcie_do_recovery(), where reset_link() looked up the underlying pci_port_service_driver and its .reset_link() function pointer. Instead of using this roundabout way, we can just pass the driver-specific .reset_link() callback function when calling pcie_do_recovery() function. This allows us to call pcie_do_recovery() from code that is not a PCIe port service driver, e.g., Error Disconnect Recover (EDR) support. Remove pcie_port_find_service() and pcie_port_service_driver.reset_link since they are now unused. Link: https://lore.kernel.org/r/60e02b87b526cdf2930400059d98704bf0a147d1.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-10PCI: Add PCIE_LNKCAP2_SLS2SPEED() macroYicong Yang
Add PCIE_LNKCAP2_SLS2SPEED macro for transforming raw Link Capabilities 2 values to the pci_bus_speed. This is next to PCIE_SPEED2MBS_ENC() to make it easier to update both places when adding support for new speeds. Link: https://lore.kernel.org/r/1581937984-40353-10-git-send-email-yangyicong@hisilicon.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-10PCI: Use pci_speed_string() for all PCI/PCI-X/PCIe stringsBjorn Helgaas
Previously some PCI speed strings came from pci_speed_string(), some came from the PCIe-specific PCIE_SPEED2STR(), and some came from a PCIe-specific switch statement. These methods were inconsistent: pci_speed_string() PCIE_SPEED2STR() switch ------------------ ---------------- ------ 33 MHz PCI ... 2.5 GT/s PCIe 2.5 GT/s 2.5 GT/s 5.0 GT/s PCIe 5 GT/s 5 GT/s 8.0 GT/s PCIe 8 GT/s 8 GT/s 16.0 GT/s PCIe 16 GT/s 16 GT/s 32.0 GT/s PCIe 32 GT/s 32 GT/s Standardize on pci_speed_string() as the single source of these strings. Note that this adds ".0" and "PCIe" to some messages, including sysfs "max_link_speed" files, a brcmstb "link up" message, and the link status dmesg logging, e.g., nvme 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:00:01.1 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) I think it's better to standardize on a single version of the speed text. Previously we had strings like this: /sys/bus/pci/slots/0/cur_bus_speed: 8.0 GT/s PCIe /sys/bus/pci/slots/0/max_bus_speed: 8.0 GT/s PCIe /sys/devices/pci0000:00/0000:00:1c.0/current_link_speed: 8 GT/s /sys/devices/pci0000:00/0000:00:1c.0/max_link_speed: 8 GT/s This changes the latter two to match the slots files: /sys/devices/pci0000:00/0000:00:1c.0/current_link_speed: 8.0 GT/s PCIe /sys/devices/pci0000:00/0000:00:1c.0/max_link_speed: 8.0 GT/s PCIe Based-on-patch by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-10PCI: Add pci_speed_string()Bjorn Helgaas
Add pci_speed_string() to return a text description of the supplied bus or link speed. The slot code previously used the private pci_bus_speed_strings[] array for this purpose, but adding this interface will enable us to consolidate similar code elsewhere. Export pcie_link_speed[] and pci_speed_string() so they can be used by modules. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-02-28PCI: Add 32 GT/s decoding in some macrosYicong Yang
Link speed 32.0 GT/s is supported in PCIe r5.0. Add this speed to PCIE_SPEED2STR() and PCIE_SPEED2MBS_ENC() to correctly decode it. This is complementary to de76cda215d5 ("PCI: Decode PCIe 32 GT/s link speed"). Link: https://lore.kernel.org/r/1581937984-40353-2-git-send-email-yangyicong@hisilicon.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-12-18PCI: Fix pci_add_dma_alias() bitmask sizeJames Sewart
The number of possible devfns is 256, but pci_add_dma_alias() allocated a bitmap of size 255. Fix this off-by-one error. This fixes commits 338c3149a221 ("PCI: Add support for multiple DMA aliases") and c6635792737b ("PCI: Allocate dma_alias_mask with bitmap_zalloc()"), but I doubt it was possible to see a problem because it takes 4 64-bit longs (or 8 32-bit longs) to hold 255 bits, and bitmap_zalloc() doesn't save the 255-bit size anywhere. [bhelgaas: commit log, move #define to drivers/pci/pci.h, include loop limit fix from Qian Cai: https://lore.kernel.org/r/20191218170004.5297-1-cai@lca.pw] Signed-off-by: James Sewart <jamessewart@arista.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2019-11-28Merge branch 'remotes/lorenzo/pci/mmio-dma-ranges'Bjorn Helgaas
- Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) * remotes/lorenzo/pci/mmio-dma-ranges: PCI: Make devm_of_pci_get_host_bridge_resources() static PCI: rcar: Use inbound resources for setup PCI: iproc: Use inbound resources for setup PCI: xgene: Use inbound resources for setup PCI: v3-semi: Use inbound resources for setup PCI: ftpci100: Use inbound resources for setup PCI: of: Add inbound resource parsing to helpers PCI: versatile: Enable COMPILE_TEST PCI: versatile: Remove usage of PHYS_OFFSET PCI: versatile: Use pci_parse_request_of_pci_ranges() PCI: xilinx-nwl: Use pci_parse_request_of_pci_ranges() PCI: xilinx: Use pci_parse_request_of_pci_ranges() PCI: xgene: Use pci_parse_request_of_pci_ranges() PCI: v3-semi: Use pci_parse_request_of_pci_ranges() PCI: rockchip: Drop storing driver private outbound resource data PCI: rockchip: Use pci_parse_request_of_pci_ranges() PCI: mobiveil: Use pci_parse_request_of_pci_ranges() PCI: mediatek: Use pci_parse_request_of_pci_ranges() PCI: iproc: Use pci_parse_request_of_pci_ranges() PCI: faraday: Use pci_parse_request_of_pci_ranges() PCI: dwc: Use pci_parse_request_of_pci_ranges() PCI: altera: Use pci_parse_request_of_pci_ranges() PCI: aardvark: Use pci_parse_request_of_pci_ranges() PCI: Export pci_parse_request_of_pci_ranges() resource: Add a resource_list_first_type helper # Conflicts: # drivers/pci/controller/pcie-rcar.c
2019-11-28Merge branch 'pci/virtualization'Bjorn Helgaas
- Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Unify ACS quirk implementations (Bjorn Helgaas) * pci/virtualization: PCI: Unify ACS quirk desired vs provided checking PCI: Make ACS quirk implementations more uniform PCI: Apply Cavium ACS quirk to ThunderX2 and ThunderX3 PCI/IOV: Serialize sysfs sriov_numvfs reads vs writes PCI: Add DMA alias quirk for Intel VCA NTB PCI: Fix Intel ACS quirk UPDCR register address PCI/ATS: Make pci_restore_pri_state(), pci_restore_pasid_state() private PCI/ATS: Remove unnecessary EXPORT_SYMBOL_GPL() PCI/ATS: Remove unused PRI and PASID stubs PCI/ATS: Consolidate ATS declarations in linux/pci-ats.h PCI/ATS: Cache PRI PRG Response PASID Required bit PCI/ATS: Cache PASID Capability offset PCI/ATS: Cache PRI Capability offset PCI/ATS: Disable PF/VF ATS service independently PCI/ATS: Handle sharing of PF PASID Capability with all VFs PCI/ATS: Handle sharing of PF PRI Capability with all VFs PCI/ATS: Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI iommu/vt-d: Select PCI_PRI for INTEL_IOMMU_SVM
2019-11-28Merge branch 'pci/resource'Bjorn Helgaas
- Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) * pci/resource: PCI: Do not use bus number zero from EA capability PCI: Avoid double hpmemsize MMIO window assignment PCI: Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters PCI: Add PCI_STD_NUM_BARS for the number of standard BARs PCI: Fix missing bridge dma_ranges resource list cleanup PCI: Protect pci_reassign_bridge_resources() against concurrent addition/removal
2019-11-28Merge branch 'pci/pm'Bjorn Helgaas
- Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) * pci/pm: PCI/PM: Move pci_dev_wait() definition earlier PCI/PM: Add missing link delays required by the PCIe spec PCI/PM: Add pcie_wait_for_link_delay() PCI/PM: Return error when changing power state from D3cold PCI/PM: Decode D3cold power state correctly PCI/PM: Fold __pci_complete_power_transition() into its caller PCI/PM: Avoid exporting __pci_complete_power_transition() PCI/PM: Fold __pci_start_power_transition() into its caller PCI/PM: Use pci_power_up() in pci_set_power_state() PCI/PM: Move power state update away from pci_power_up() PCI/PM: Remove unused pci_driver.suspend_late() hook PCI/PM: Remove unused pci_driver.resume_early() hook xen-platform: Convert to generic power management PCI/PM: Simplify pci_set_power_state() PCI/PM: Expand PM reset messages to mention D3hot (not just D3) PCI/PM: Apply D2 delay as milliseconds, not microseconds PCI/PM: Use pci_WARN() to include device information PCI/PM: Use PCI dev_printk() wrappers for consistency PCI/PM: Wrap long lines in documentation PCI/PM: Note that PME can be generated from D0 PCI/PM: Make power management op coding style consistent PCI/PM: Run resume fixups before disabling wakeup events PCI/PM: Clear PCIe PME Status even for legacy power management PCI/PM: Correct pci_pm_thaw_noirq() documentation PCI/PM: Always return devices to D0 when thawing
2019-11-28Merge branch 'pci/aspm'Bjorn Helgaas
- Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) * pci/aspm: PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI/ASPM: Add pcie_aspm_get_link() PCI/ASPM: Allow re-enabling Clock PM PCI/ASPM: Add L1 PM substate support to pci_disable_link_state() PCI/ASPM: Remove pcie_aspm_enabled() unnecessary locking
2019-11-21PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related codeHeiner Kallweit
Previously, CONFIG_PCIEASPM_DEBUG enabled "link_state" and "clk_ctl" sysfs files that controlled ASPM. We believe these files were rarely if ever used. We recently added sysfs ASPM controls that are always present, so the debug code is no longer needed. Removing this debug code has been discussed for quite some time, see e.g. [0]. Remove PCIEASPM_DEBUG and the related code. [0] https://lore.kernel.org/lkml/20180727202619.GD173328@bhelgaas-glaptop.roam.corp.google.com/ Link: https://lore.kernel.org/r/ec935d8e-c084-3938-f1d1-748617596b25@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-11-21PCI/ASPM: Add sysfs attributes for controlling ASPM link statesHeiner Kallweit
Add sysfs attributes to Endpoints and other Upstream Ports to control ASPM, Clock PM, and L1 PM Substates. The new attributes are: /sys/devices/pci*/.../link/clkpm /sys/devices/pci*/.../link/l0s_aspm /sys/devices/pci*/.../link/l1_aspm /sys/devices/pci*/.../link/l1_1_aspm /sys/devices/pci*/.../link/l1_2_aspm /sys/devices/pci*/.../link/l1_1_pcipm /sys/devices/pci*/.../link/l1_2_pcipm An attribute is only visible if both ends of the Link leading to the device support the state. Writing y/1/on to the file enables the state; n/0/off disables it. These attributes can be used to tune the power/performance tradeoff for individual devices. [bhelgaas: commit log, rename directory to "link"] Link: https://lore.kernel.org/r/b1c83f8a-9bf6-eac5-82d0-cf5b90128fbf@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-11-20PCI/PM: Add missing link delays required by the PCIe specMika Westerberg
Currently Linux does not follow PCIe spec regarding the required delays after reset. A concrete example is a Thunderbolt add-in-card that consists of a PCIe switch and two PCIe endpoints: +-1b.0-[01-6b]----00.0-[02-6b]--+-00.0-[03]----00.0 TBT controller +-01.0-[04-36]-- DS hotplug port +-02.0-[37]----00.0 xHCI controller \-04.0-[38-6b]-- DS hotplug port The root port (1b.0) and the PCIe switch downstream ports are all PCIe Gen3 so they support 8GT/s link speeds. We wait for the PCIe hierarchy to enter D3cold (runtime): pcieport 0000:00:1b.0: power state changed by ACPI to D3cold When it wakes up from D3cold, according to the PCIe 5.0 section 5.8 the PCIe switch is put to reset and its power is re-applied. This means that we must follow the rules in PCIe 5.0 section 6.6.1. For the PCIe Gen3 ports we are dealing with here, the following applies: With a Downstream Port that supports Link speeds greater than 5.0 GT/s, software must wait a minimum of 100 ms after Link training completes before sending a Configuration Request to the device immediately below that Port. Software can determine when Link training completes by polling the Data Link Layer Link Active bit or by setting up an associated interrupt (see Section 6.7.3.3). Translating this into the above topology we would need to do this (DLLLA stands for Data Link Layer Link Active): 0000:00:1b.0: wait for 100 ms after DLLLA is set before access to 0000:01:00.0 0000:02:00.0: wait for 100 ms after DLLLA is set before access to 0000:03:00.0 0000:02:02.0: wait for 100 ms after DLLLA is set before access to 0000:37:00.0 I've instrumented the kernel with some additional logging so we can see the actual delays performed: pcieport 0000:00:1b.0: power state changed by ACPI to D0 pcieport 0000:00:1b.0: waiting for D3cold delay of 100 ms pcieport 0000:00:1b.0: waiting for D3hot delay of 10 ms pcieport 0000:02:01.0: waiting for D3hot delay of 10 ms pcieport 0000:02:04.0: waiting for D3hot delay of 10 ms For the switch upstream port (01:00.0 reachable through 00:1b.0 root port) we wait for 100 ms but not taking into account the DLLLA requirement. We then wait 10 ms for D3hot -> D0 transition of the root port and the two downstream hotplug ports. This means that we deviate from what the spec requires. Performing the same check for system sleep (s2idle) transitions it turns out to be even worse. None of the mandatory delays are performed. If this would be S3 instead of s2idle then according to PCI FW spec 3.2 section 4.6.8. there is a specific _DSM that allows the OS to skip the delays but this platform does not provide the _DSM and does not go to S3 anyway so no firmware is involved that could already handle these delays. On this particular platform these delays are not actually needed because there is an additional delay as part of the ACPI power resource that is used to turn on power to the hierarchy but since that additional delay is not required by any of standards (PCIe, ACPI) it is not present in the Intel Ice Lake, for example where missing the mandatory delays causes pciehp to start tearing down the stack too early (links are not yet trained). Below is an example how it looks like when this happens: pcieport 0000:83:04.0: pciehp: Slot(4): Card not present pcieport 0000:87:04.0: PME# disabled pcieport 0000:83:04.0: pciehp: pciehp_unconfigure_device: domain:bus:dev = 0000:86:00 pcieport 0000:86:00.0: Refused to change power state, currently in D3 pcieport 0000:86:00.0: restoring config space at offset 0x3c (was 0xffffffff, writing 0x201ff) pcieport 0000:86:00.0: restoring config space at offset 0x38 (was 0xffffffff, writing 0x0) ... There is also one reported case (see the bugzilla link below) where the missing delay causes xHCI on a Titan Ridge controller fail to runtime resume when USB-C dock is plugged. This does not involve pciehp but instead the PCI core fails to runtime resume the xHCI device: pcieport 0000:04:02.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020) pcieport 0000:04:02.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100406) xhci_hcd 0000:39:00.0: Refused to change power state, currently in D3 xhci_hcd 0000:39:00.0: restoring config space at offset 0x3c (was 0xffffffff, writing 0x1ff) xhci_hcd 0000:39:00.0: restoring config space at offset 0x38 (was 0xffffffff, writing 0x0) ... Add a new function pci_bridge_wait_for_secondary_bus() that is called on PCI core resume and runtime resume paths accordingly if the bridge entered D3cold (and thus went through reset). This is second attempt to add the missing delays. The previous solution in c2bf1fc212f7 ("PCI: Add missing link delays required by the PCIe spec") was reverted because of two issues it caused: 1. One system become unresponsive after S3 resume due to PME service spinning in pcie_pme_work_fn(). The root port in question reports that the xHCI sent PME but the xHCI device itself does not have PME status set. The PME status bit is never cleared in the root port resulting the indefinite loop in pcie_pme_work_fn(). 2. Slows down resume if the root/downstream port does not support Data Link Layer Active Reporting because pcie_wait_for_link_delay() waits 1100 ms in that case. This version should avoid the above issues because we restrict the delay to happen only if the port went into D3cold. Link: https://lore.kernel.org/linux-pci/SL2P216MB01878BBCD75F21D882AEEA2880C60@SL2P216MB0187.KORP216.PROD.OUTLOOK.COM/ Link: https://bugzilla.kernel.org/show_bug.cgi?id=203885 Link: https://lore.kernel.org/r/20191112091617.70282-3-mika.westerberg@linux.intel.com Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-11-20PCI/PM: Use pci_power_up() in pci_set_power_state()Rafael J. Wysocki
Make it explicitly clear that the code to put devices into D0 in pci_set_power_state() and in pci_pm_default_resume_early() is the same by making the latter use pci_power_up() for transitions into D0. Code rearrangement, no intentional functional impact. Link: https://lore.kernel.org/r/2520019.OZ1nXS5aSj@kreacher Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-20PCI: Make devm_of_pci_get_host_bridge_resources() staticRob Herring
Now that all the PCI host drivers are using pci_parse_request_of_pci_ranges(), make devm_of_pci_get_host_bridge_resources() static. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com>
2019-11-20PCI: of: Add inbound resource parsing to helpersRob Herring
Extend devm_of_pci_get_host_bridge_resources() and pci_parse_request_of_pci_ranges() helpers to also parse the inbound addresses from DT 'dma-ranges' and populate a resource list with the translated addresses. This will help ensure 'dma-ranges' is always parsed in a consistent way. Tested-by: Srinath Mannam <srinath.mannam@broadcom.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> # for AArdvark Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Srinath Mannam <srinath.mannam@broadcom.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Will Deacon <will@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Toan Le <toan@os.amperecomputing.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Tom Joseph <tjoseph@cadence.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in> Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Cc: Simon Horman <horms@verge.net.au> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Michal Simek <michal.simek@xilinx.com> Cc: rfi@lists.rocketboards.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org
2019-10-23PCI: Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parametersNicholas Johnson
The existing "pci=hpmemsize=nn[KMG]" kernel parameter overrides the default size of both the non-prefetchable and the prefetchable MMIO windows for hotplug bridges. Add "pci=hpmmiosize=nn[KMG]" to override the default size of only the non-prefetchable MMIO window. Add "pci=hpmmioprefsize=nn[KMG]" to override the default size of only the prefetchable MMIO window. Link: https://lore.kernel.org/r/SL2P216MB0187E4D0055791957B7E2660806B0@SL2P216MB0187.KORP216.PROD.OUTLOOK.COM Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-10-18PCI/AER: Save AER Capability for suspend/resumePatel, Mayurkumar
Previously we did not save and restore the AER configuration on suspend/resume, so the configuration may be lost after resume. Save the AER configuration during suspend and restore it during resume. [bhelgaas: commit log] Link: https://lore.kernel.org/r/92EBB4272BF81E4089A7126EC1E7B28492C3B007@IRSMSX101.ger.corp.intel.com Signed-off-by: Mayurkumar Patel <mayurkumar.patel@intel.com> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-10-15PCI/ATS: Make pci_restore_pri_state(), pci_restore_pasid_state() privateBjorn Helgaas
These interfaces: void pci_restore_pri_state(struct pci_dev *pdev); void pci_restore_pasid_state(struct pci_dev *pdev); are only used in drivers/pci and do not need to be seen by the rest of the kernel. Most them to drivers/pci/pci.h so they're private to the PCI subsystem. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Joerg Roedel <jroedel@suse.de>
2019-10-15PCI/ATS: Cache PASID Capability offsetKuppuswamy Sathyanarayanan
Previously each PASID interface searched for the PASID Capability. Cache the capability offset the first time we use it instead of searching each time. [bhelgaas: commit log, reorder patch to later, call pci_pasid_init() from pci_init_capabilities()] Link: https://lore.kernel.org/r/4957778959fa34eab3e8b3065d1951989c61cb0f.1567029860.git.sathyanarayanan.kuppuswamy@linux.intel.com Link: https://lore.kernel.org/r/20190905193146.90250-6-helgaas@kernel.org Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ATS: Cache PRI Capability offsetKuppuswamy Sathyanarayanan
Previously each PRI interface searched for the PRI Capability. Cache the capability offset the first time we use it instead of searching each time. [bhelgaas: commit log, reorder patch to later, call pci_pri_init() from pci_init_capabilities()] Link: https://lore.kernel.org/r/0c5495d376faf6dbb8eb2165204c474438aaae65.156 7029860.git.sathyanarayanan.kuppuswamy@linux.intel.com Link: https://lore.kernel.org/r/20190905193146.90250-5-helgaas@kernel.org Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-23Merge tag 'pci-v5.4-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...
2019-09-23Merge branch 'pci/misc'Bjorn Helgaas
- Use devm_add_action_or_reset() helper (Fuqian Huang) - Mark expected switch fall-through (Gustavo A. R. Silva) - Convert sysfs device attributes from __ATTR() to DEVICE_ATTR() (Kelsey Skunberg) - Convert sysfs file permissions from S_IRUSR etc to octal (Kelsey Skunberg) - Move SR-IOV sysfs functions to iov.c (Kelsey Skunberg) - Add pci_info_ratelimited() to ratelimit PCI messages separately (Krzysztof Wilczynski) - Fix "'static' not at beginning of declaration" warnings (Krzysztof Wilczynski) - Clean up resource_alignment parameter to not require static buffer (Logan Gunthorpe) - Add ACS quirk for iProc PAXB (Abhinav Ratna) - Add pci_irq_vector() and other stubs for !CONFIG_PCI (Herbert Xu) * pci/misc: PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI PCI: Add ACS quirk for iProc PAXB PCI: Force trailing new line to resource_alignment_param in sysfs PCI: Move pci_[get|set]_resource_alignment_param() into their callers PCI: Clean up resource_alignment parameter to not require static buffer PCI: Use static const struct, not const static struct PCI: Add pci_info_ratelimited() to ratelimit PCI separately PCI/IOV: Remove group write permission from sriov_numvfs, sriov_drivers_autoprobe PCI/IOV: Move sysfs SR-IOV functions to iov.c PCI: sysfs: Change permissions from symbolic to octal PCI: sysfs: Change DEVICE_ATTR() to DEVICE_ATTR_WO() PCI: sysfs: Define device attributes with DEVICE_ATTR*() PCI: Mark expected switch fall-through PCI: Use devm_add_action_or_reset()
2019-09-23Merge branch 'pci/enumeration'Bjorn Helgaas
- Consolidate _HPP & _HPX code in pci-acpi.h and remove unnecessary struct hotplug_program_ops (Krzysztof Wilczynski) - Fixup PCIe device types to remove the need for dev->has_secondary_link (Mika Westerberg) * pci/enumeration: PCI: Get rid of dev->has_secondary_link flag PCI: Make pcie_downstream_port() available outside of access.c PCI/ACPI: Remove unnecessary struct hotplug_program_ops PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.c PCI/ACPI: Rename _HPX structs from hpp_* to hpx_*
2019-09-07PCI: Make pcie_downstream_port() available outside of access.cMika Westerberg
pcie_downstream_port() is useful in other places where code needs to determine whether the PCIe port is downstream so make it available outside of access.c. Link: https://lore.kernel.org/r/20190822085553.62697-1-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-08-28PCI/ACPI: Remove unnecessary struct hotplug_program_opsKrzysztof Wilczynski
Move the ACPI-specific structs hpx_type0, hpx_type1, hpx_type2 and hpx_type3 to drivers/pci/pci-acpi.c as they are not used anywhere else. Then remove the struct hotplug_program_ops that has been shared between drivers/pci/probe.c and drivers/pci/pci-acpi.c from drivers/pci/pci.h as it is no longer needed. The struct hotplug_program_ops was added by 87fcf12e846a ("PCI/ACPI: Remove the need for 'struct hotplug_params'") and replaced previously used struct hotplug_params enabling the support for the _HPX Type 3 Setting Record that was added by f873c51a155a ("PCI/ACPI: Implement _HPX Type 3 Setting Record"). The new struct allowed for the static functions such program_hpx_type0(), program_hpx_type1(), etc., from the drivers/pci/probe.c to be called from the function pci_acpi_program_hp_params() in the drivers/pci/pci-acpi.c. Previously a programming of _HPX Type 0 was as follows: drivers/pci/probe.c: program_hpx_type0() ... pci_configure_device() hp_ops = { .program_type0 = program_hpx_type0, ... } pci_acpi_program_hp_params(&hp_ops) drivers/pci/pci-acpi.c: pci_acpi_program_hp_params(&hp_ops) acpi_run_hpx(hp_ops) decode_type0_hpx_record() hp_ops->program_type0 # program_hpx_type0() called via hp_ops After the ACPI-specific functions, structs, enums, etc., have been moved to drivers/pci/pci-acpi.c there is no need for the hotplug_program_ops as all of the _HPX Type 0, 1, 2 and 3 are directly accessible. Link: https://lore.kernel.org/r/20190827094951.10613-4-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-28PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.cKrzysztof Wilczynski
Move program_hpx_type0(), program_hpx_type1(), etc., and enums hpx_type3_dev_type, hpx_type3_fn_type and hpx_type3_cfg_loc to drivers/pci/pci-acpi.c as these functions and enums are ACPI-specific. Move structs hpx_type0, hpx_type1, hpx_type2 and hpx_type3 to drivers/pci/pci.h as these are shared between drivers/pci/pci-acpi.c and drivers/pci/probe.c. Link: https://lore.kernel.org/r/20190827094951.10613-3-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-20PCI/IOV: Move sysfs SR-IOV functions to iov.cKelsey Skunberg
The sysfs SR-IOV functions are only needed when the kernel is built with SR-IOV support. Rather than put them in pci-sysfs.c under #ifdef CONFIG_PCI_IOV, move them to iov.c, which is only compiled when CONFIG_PCI_IOV=y. Link: https://lore.kernel.org/r/20190813204513.4790-4-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Donald Dutile <ddutile@redhat.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-08-07Revert "PCI: Add missing link delays required by the PCIe spec"Mika Westerberg
Commit c2bf1fc212f7 ("PCI: Add missing link delays required by the PCIe spec") turned out causing issues with some systems either by making them unresponsive or slowing down runtime and system wide resume of PCIe devices. While root cause for the unresponsiveness is still under investigation given the amount of issues reported better to revert it for now. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204413 Link: https://lore.kernel.org/linux-pci/SL2P216MB01878BBCD75F21D882AEEA2880C60@SL2P216MB0187.KORP216.PROD.OUTLOOK.COM/ Link: https://lore.kernel.org/linux-pci/2857501d-c167-547d-c57d-d5d24ea1f1dc@molgen.mpg.de/ Reported-by: Matthias Andree <matthias.andree@gmx.de> Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-07-30PCI: Make pci_set_of_node(), etc privateKelsey Skunberg
These interfaces: void pci_set_of_node(struct pci_dev *dev); void pci_release_of_node(struct pci_dev *dev); void pci_set_bus_of_node(struct pci_bus *bus); void pci_release_bus_of_node(struct pci_bus *bus); are only used in drivers/pci/ and do not need to be seen by the rest of the kernel. Move them to drivers/pci/pci.h so they're private to the PCI subsystem. Link: https://lore.kernel.org/r/20190724233848.73327-12-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-07-30PCI: Make pci_enable_ptm() privateKelsey Skunberg
This interface: int pci_enable_ptm(struct pci_dev *dev, u8 *granularity); is only used in drivers/pci/ and does not need to be seen by the rest of the kernel. Move it to drivers/pci/pci.h so it's private to the PCI subsystem. Link: https://lore.kernel.org/r/20190724233848.73327-11-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-07-30PCI: Make pcie_set_ecrc_checking(), pcie_ecrc_get_policy() privateKelsey Skunberg
These interfaces: void pcie_set_ecrc_checking(struct pci_dev *dev); void pcie_ecrc_get_policy(char *str); are only used in drivers/pci/ and do not need to be seen by the rest of the kernel. Move them to drivers/pci/pci.h so they're private to the PCI subsystem. Link: https://lore.kernel.org/r/20190724233848.73327-10-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-07-30PCI: Make pci_ats_init() privateKelsey Skunberg
This interface: void pci_ats_init(struct pci_dev *dev); is only used in drivers/pci/ and does not need to be seen by the rest of the kernel. Move it to drivers/pci/pci.h so it's private to the PCI subsystem. Link: https://lore.kernel.org/r/20190724233848.73327-9-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-07-30PCI: Make pcie_update_link_speed() privateKelsey Skunberg
This interface: void pcie_update_link_speed(struct pci_bus *bus, u16 link_status); is only used in drivers/pci/ and does not need to be seen by the rest of the kernel. Move it to drivers/pci/pci.h so it's private to the PCI subsystem. Link: https://lore.kernel.org/r/20190724233848.73327-8-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-07-30PCI: Make pci_bus_get(), pci_bus_put() privateKelsey Skunberg
These interfaces: struct pci_bus *pci_bus_get(struct pci_bus *bus); void pci_bus_put(struct pci_bus *bus); are only used in drivers/pci/ and do not need to be seen by the rest of the kernel. Move them to drivers/pci/pci.h so they're private to the PCI subsystem. Link: https://lore.kernel.org/r/20190724233848.73327-7-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-07-30PCI: Make pci_hotplug_io_size, mem_size, and bus_size privateKelsey Skunberg
These symbols: extern unsigned long pci_hotplug_io_size; extern unsigned long pci_hotplug_mem_size; extern unsigned long pci_hotplug_bus_size; are only used in drivers/pci/ and do not need to be seen by the rest of the kernel. Move them to drivers/pci/pci.h so they're private to the PCI subsystem. Link: https://lore.kernel.org/r/20190724233848.73327-6-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-07-30PCI: Make pci_save_vc_state(), pci_restore_vc_state(), etc privateKelsey Skunberg
These Virtual Channel interfaces: int pci_save_vc_state(struct pci_dev *dev); void pci_restore_vc_state(struct pci_dev *dev); void pci_allocate_vc_save_buffers(struct pci_dev *dev); are only used in drivers/pci/ and do not need to be seen by the rest of the kernel. Move them to drivers/pci/pci.h so they're private to the PCI subsystem. Link: https://lore.kernel.org/r/20190724233848.73327-5-skunberg.kelsey@gmail.com Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit (git 2.34.1) at 2024-06-16 06:55:07 +0000