summaryrefslogtreecommitdiff
path: root/drivers/pci/pcie
AgeCommit message (Collapse)Author
2017-04-28Merge branch 'pci/enumeration' into nextBjorn Helgaas
* pci/enumeration: PCI: Include PCI-to-PCIe bridges as "Downstream Ports" PCI: Improve __pci_read_base() robustness PCI: Short-circuit pci_device_is_present() for disconnected devices PCI/MSI: Skip disabling disconnected devices PCI: Don't attempt config access to disconnected devices PCI: Add device disconnected state PCI: Export PCI device config accessors
2017-03-29PCI: Add device disconnected stateKeith Busch
Add a new state to pci_dev to be set when it is unexpectedly disconnected. The PCI driver tear down functions can observe this new device state so they may skip operations that will fail. The pciehp and pcie-dpc drivers are aware when the link is down, so these set the flag when their handlers detect the device is disconnected. Tested-by: Krishna Dhulipala <krishnad@fb.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Wei Zhang <wzhang@fb.com>
2017-03-07PCI/ASPM: Always set link->downstream to avoid NULL dereference on removeYinghai Lu
We call pcie_aspm_exit_link_state() when we remove a device. If the device is the last PCIe function to be removed below a bridge and the bridge has an ASPM link_state struct, we disable ASPM on the link. Disabling ASPM requires link->downstream (used in pcie_config_aspm_link()). We previously set link->downstream in pcie_aspm_cap_init(), but only if the device was not blacklisted. Removing the blacklisted device caused a NULL pointer dereference in the pcie_aspm_exit_link_state() -> pcie_config_aspm_link() path: # echo 1 > /sys/bus/pci/devices/0000\:0b\:00.0/remove ... BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 IP: pcie_config_aspm_link+0x5d/0x2b0 Call Trace: pcie_aspm_exit_link_state+0x75/0x130 pci_stop_bus_device+0xa4/0xb0 pci_stop_and_remove_bus_device_locked+0x1a/0x30 remove_store+0x50/0x70 dev_attr_store+0x18/0x30 sysfs_kf_write+0x44/0x60 kernfs_fop_write+0x10e/0x190 __vfs_write+0x28/0x110 ? rcu_read_lock_sched_held+0x5d/0x80 ? rcu_sync_lockdep_assert+0x2c/0x60 ? __sb_start_write+0x173/0x1a0 ? vfs_write+0xb3/0x180 vfs_write+0xc4/0x180 SyS_write+0x49/0xa0 do_syscall_64+0xa6/0x1c0 entry_SYSCALL64_slow_path+0x25/0x25 ---[ end trace bd187ee0267df5d9 ]--- To avoid this, set link->downstream in alloc_pcie_link_state(), so every pcie_link_state structure has a valid link->downstream pointer. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rajat Jain <rajatja@google.com> CC: stable@vger.kernel.org
2017-02-23Merge tag 'pci-v4.11-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add ASPM L1 substate support - enable PCIe Extended Tags when supported - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx - increase VPD access timeout - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432 - use new pci_irq_alloc_vectors() in more drivers - fix MSI affinity memory leak - remove unused MSI interfaces and update documentation - remove unused AER .link_reset() callback - avoid pci_lock / p->pi_lock deadlock seen with perf - serialize sysfs enable/disable num_vfs operations - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and refactor so we can support both hosts and endpoints - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers - add Rockchip system power management support - add Thunder-X cn81xx and cn83xx support - add Exynos 5440 PCIe PHY support * tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits) PCI: dwc: Remove dependency of designware on CONFIG_PCI PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host PCI: dwc: Split pcie-designware.c into host and core files PCI: dwc: designware: Fix style errors in pcie-designware.c PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() PCI: dwc: all: Split struct pcie_port into host-only and core structures PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() PCI: dwc: all: Rename cfg_read/cfg_write to read/write PCI: dwc: all: Use platform_set_drvdata() to save private data PCI: dwc: designware: Move register defines to designware header file PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code PCI: dra7xx: Group PHY API invocations PCI: dra7xx: Enable MSI and legacy interrupts simultaneously PCI: dra7xx: Add support to force RC to work in GEN1 mode PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional() PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory PCI: exynos: Support the PHY generic framework Documentation: binding: Modify the exynos5440 PCIe binding phy: phy-exynos-pcie: Add support for Exynos PCIe PHY Documentation: samsung-phy: Add exynos-pcie-phy binding ...
2017-02-15Merge branch 'pci/msi' into nextBjorn Helgaas
* pci/msi: PCI/MSI: Update MSI/MSI-X bits in PCIEBUS-HOWTO PCI/MSI: Document pci_alloc_irq_vectors(), deprecate pci_enable_msi() PCI/MSI: Return -ENOSPC if pci_enable_msi_range() can't get enough vectors PCI/portdrv: Use pci_irq_alloc_vectors() PCI/MSI: Check that we have a legacy interrupt line before using it PCI/MSI: Remove pci_msi_domain_{alloc,free}_irqs() PCI/MSI: Remove unused pci_msi_create_default_irq_domain() PCI/MSI: Return failure when msix_setup_entries() fails PCI/MSI: Remove pci_enable_msi_{exact,range}() amd-xgbe: Update PCI support to use new IRQ functions [media] cobalt: use pci_irq_allocate_vectors() PCI/MSI: Fix msi_capability_init() kernel-doc warnings
2017-02-15Merge branch 'pci/dpc' into nextBjorn Helgaas
* pci/dpc: PCI/DPC: Wait for Root Port busy to clear PCI/DPC: Decode extended reasons
2017-02-15PCI/PME: Restore pcie_pme_driver.removeYinghai Lu
In addition to making PME non-modular, d7def2040077 ("PCI/PME: Make explicitly non-modular") removed the pcie_pme_driver .remove() method, pcie_pme_remove(). pcie_pme_remove() freed the PME IRQ that was requested in pci_pme_probe(). The fact that we don't free the IRQ after d7def2040077 causes the following crash when removing a PCIe port device via /sys: ------------[ cut here ]------------ kernel BUG at drivers/pci/msi.c:370! invalid opcode: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 14509 Comm: sh Tainted: G W 4.8.0-rc1-yh-00012-gd29438d RIP: 0010:[<ffffffff9758bbf5>] free_msi_irqs+0x65/0x190 ... Call Trace: [<ffffffff9758cda4>] pci_disable_msi+0x34/0x40 [<ffffffff97583817>] cleanup_service_irqs+0x27/0x30 [<ffffffff97583e9a>] pcie_port_device_remove+0x2a/0x40 [<ffffffff97584250>] pcie_portdrv_remove+0x40/0x50 [<ffffffff97576d7b>] pci_device_remove+0x4b/0xc0 [<ffffffff9785ebe6>] __device_release_driver+0xb6/0x150 [<ffffffff9785eca5>] device_release_driver+0x25/0x40 [<ffffffff975702e4>] pci_stop_bus_device+0x74/0xa0 [<ffffffff975704ea>] pci_stop_and_remove_bus_device_locked+0x1a/0x30 [<ffffffff97578810>] remove_store+0x50/0x70 [<ffffffff9785a378>] dev_attr_store+0x18/0x30 [<ffffffff97260b64>] sysfs_kf_write+0x44/0x60 [<ffffffff9725feae>] kernfs_fop_write+0x10e/0x190 [<ffffffff971e13f8>] __vfs_write+0x28/0x110 [<ffffffff970b0fa4>] ? percpu_down_read+0x44/0x80 [<ffffffff971e53a7>] ? __sb_start_write+0xa7/0xe0 [<ffffffff971e53a7>] ? __sb_start_write+0xa7/0xe0 [<ffffffff971e1f04>] vfs_write+0xc4/0x180 [<ffffffff971e3089>] SyS_write+0x49/0xa0 [<ffffffff97001a46>] do_syscall_64+0xa6/0x1b0 [<ffffffff9819201e>] entry_SYSCALL64_slow_path+0x25/0x25 ... RIP [<ffffffff9758bbf5>] free_msi_irqs+0x65/0x190 RSP <ffff89ad3085bc48> ---[ end trace f4505e1dac5b95d3 ]--- Segmentation fault Restore pcie_pme_remove(). [bhelgaas: changelog] Fixes: d7def2040077 ("PCI/PME: Make explicitly non-modular") Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v4.9+
2017-02-14PCI/ASPM: Add comment about L1 substate latencyRajat Jain
Since the exit latencies for L1 substates are not advertised by a device, it is not clear in spec how to do a L1 substate exit latency check. We assume that the L1 exit latencies advertised by a device include L1 substate latencies (and hence do not do any check). If that is not true, we should do some sort of check here. (I'm not clear about what that check should like currently. I'd be glad to take up any suggestions). Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-14PCI/ASPM: Configure L1 substate settingsRajat Jain
Configure the L1 substate settings on the upstream and downstream devices, while taking care of the rules dictated by the PCIe spec. [bhelgaas: drop "inline"] Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-14PCI/ASPM: Calculate and save the L1.2 timing parametersRajat Jain
Calculate and save the timing parameters that need to be programmed if we need to enable L1.2 substates later. We use the same logic (and a constant value for 1 of the parameters) as used by Intel's coreboot: https://www.coreboot.org/pipermail/coreboot-gerrit/2015-March/021134.html https://review.coreboot.org/#/c/8832/ Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-14PCI/ASPM: Read and set up L1 substate capabilitiesRajat Jain
The PCIe spec (r3.1, sec 7.33) says the L1 PM Substates Capability may be implemented only in function 0. Read the L1 substate capability structures of upstream and downstream components of the link and set it up in the device structure. [bhelgaas: add specific spec reference] Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-14PCI/ASPM: Add support for L1 substatesRajat Jain
Add support for ASPM L1 substates. For details about L1 substates, see the PCIe r3.1 spec, which includes the ECN below in secs 5.5 and 7.33. Add macros for the 4 new L1 substates, and add a new ASPM "POWER_SUPERSAVE" policy that can be used to enable L1 substates on a system if desired. The new policy is in a sense, a superset of the existing POWERSAVE policy. The 4 policies are now: DEFAULT: Reads and uses whatever ASPM states BIOS enabled PERFORMANCE: Everything except L0 disabled. POWERSAVE: L0s and L1 enabled (but not L1 substates) POWER_SUPERSAVE: L0s + L1 + L1 substates also enabled [bhelgaas: add PCIe r3.1 spec reference] Link: https://pcisig.com/sites/default/files/specification_documents/ECN_L1_PM_Substates_with_CLKREQ_31_May_2013_Rev10a.pdf Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-10PCI/portdrv: Use pci_irq_alloc_vectors()Christoph Hellwig
Use pci_irq_alloc_vectors() and greatly simplify the code by managing the vector number for the subservices directly. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-10PCI/DPC: Wait for Root Port busy to clearKeith Busch
Per PCIe r3.1, sec 6.2.10 and sec 7.13.4, on Root Ports that support "RP Extensions for DPC", When the DPC Trigger Status bit is Set and the DPC RP Busy bit is Set, software must leave the Root Port in DPC until the DPC RP Busy bit reads 0b. Wait up to 1 second for the Root Port to become non-busy. [bhelgaas: changelog, spec references] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-10PCI/DPC: Decode extended reasonsKeith Busch
Decode the currently defined extended event reasons rather than just using the generic "extended" explanation. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-01-27PCI/ASPM: Handle PCI-to-PCIe bridges as roots of PCIe hierarchiesBjorn Helgaas
In a struct pcie_link_state, link->root points to the pcie_link_state of the root of the PCIe hierarchy. For the topmost link, this points to itself (link->root = link). For others, we copy the pointer from the parent (link->root = link->parent->root). Previously we recognized that Root Ports originated PCIe hierarchies, but we treated PCI/PCI-X to PCIe Bridges as being in the middle of the hierarchy, and when we tried to copy the pointer from link->parent->root, there was no parent, and we dereferenced a NULL pointer: BUG: unable to handle kernel NULL pointer dereference at 0000000000000090 IP: [<ffffffff9e424350>] pcie_aspm_init_link_state+0x170/0x820 Recognize that PCI/PCI-X to PCIe Bridges originate PCIe hierarchies just like Root Ports do, so link->root for these devices should also point to itself. Fixes: 51ebfc92b72b ("PCI: Enumerate switches below PCI-to-PCIe bridges") Link: https://bugzilla.kernel.org/show_bug.cgi?id=193411 Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1022181 Tested-by: lists@ssl-mail.com Tested-by: Jayachandran C. <jnair@caviumnetworks.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.2+
2016-12-15Merge tag 'pci-v4.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes: - add support for PCI on ARM64 boxes with ACPI. We already had this for theoretical spec-compliant hardware; now we're adding quirks for the actual hardware (Cavium, HiSilicon, Qualcomm, X-Gene) - add runtime PM support for hotplug ports - enable runtime suspend for Intel UHCI that uses platform-specific wakeup signaling - add yet another host bridge registration interface. We hope this is extensible enough to subsume the others - expose device revision in sysfs for DRM - to avoid device conflicts, make sure any VF BAR updates are done before enabling the VF - avoid unnecessary link retrains for ASPM - allow INTx masking on Mellanox devices that support it - allow access to non-standard VPD for Chelsio devices - update Broadcom iProc support for PAXB v2, PAXC v2, inbound DMA, etc - update Rockchip support for max-link-speed - add NVIDIA Tegra210 support - add Layerscape LS1046a support - update R-Car compatibility strings - add Qualcomm MSM8996 support - remove some uninformative bootup messages" * tag 'pci-v4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (115 commits) PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3) PCI: Expand "VPD access disabled" quirk message PCI: pciehp: Remove loading message PCI: hotplug: Remove hotplug core message PCI: Remove service driver load/unload messages PCI/AER: Log AER IRQ when claiming Root Port PCI/AER: Log errors with PCI device, not PCIe service device PCI/AER: Remove unused version macros PCI/PME: Log PME IRQ when claiming Root Port PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors PCI: Move config space size macros to pci_regs.h x86/platform/intel-mid: Constify mid_pci_platform_pm PCI/ASPM: Don't retrain link if ASPM not possible PCI: iproc: Skip check for legacy IRQ on PAXC buses PCI: pciehp: Leave power indicator on when enabling already-enabled slot PCI: pciehp: Prioritize data-link event over presence detect PCI: rcar: Add gen3 fallback compatibility string for pcie-rcar PCI: rcar: Use gen2 fallback compatibility last PCI: rcar-gen2: Use gen2 fallback compatibility last PCI: rockchip: Move the deassert of pm/aclk/pclk after phy_init() ..
2016-12-12Merge branch 'pci/pm' into nextBjorn Helgaas
* pci/pm: x86/platform/intel-mid: Constify mid_pci_platform_pm PCI: pciehp: Add runtime PM support for PCIe hotplug ports ACPI / hotplug / PCI: Make device_is_managed_by_native_pciehp() public ACPI / hotplug / PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit PCI: Unfold conditions to block runtime PM on PCIe ports PCI: Consolidate conditions to allow runtime PM on PCIe ports PCI: Activate runtime PM on a PCIe port only if it can suspend PCI: Speed up algorithm in pci_bridge_d3_update() PCI: Autosense device removal in pci_bridge_d3_update() PCI: Don't acquire ref on parent in pci_bridge_d3_update() USB: UHCI: report non-PME wakeup signalling for Intel hardware PCI: Check for PME in targeted sleep state
2016-12-12Merge branch 'pci/misc' into nextBjorn Helgaas
* pci/misc: PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3) PCI: Expand "VPD access disabled" quirk message PCI: pciehp: Remove loading message PCI: hotplug: Remove hotplug core message PCI: Remove service driver load/unload messages PCI/AER: Log AER IRQ when claiming Root Port PCI/AER: Log errors with PCI device, not PCIe service device PCI/AER: Remove unused version macros PCI/PME: Log PME IRQ when claiming Root Port PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors PCI: Move config space size macros to pci_regs.h
2016-12-12PCI: Remove service driver load/unload messagesBjorn Helgaas
Remove the "service driver %s loaded" and unloaded messages. All service drivers already log something in their probe functions, where they can log more useful details. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12PCI/AER: Log AER IRQ when claiming Root PortBjorn Helgaas
Add a log message when we enable AER on a Root Port and the hierarchy below it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12PCI/AER: Log errors with PCI device, not PCIe service deviceBjorn Helgaas
All other AER-related log messages use the PCI device, e.g., "pci 0000:00:1c.0", not the PCIe service device, e.g., "aer 0000:00:1c.0:pcie02". Change the probe error messages to match the rest and include a little context. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12PCI/AER: Remove unused version macrosBjorn Helgaas
Remove the unused DRIVER_VERSION, DRIVER_AUTHOR, and DRIVER_DESC macros. The author information is already included in a comment above. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12PCI/PME: Log PME IRQ when claiming Root PortBjorn Helgaas
We already log a "Signaling PME" whenever the PME service driver claims a Root Port. In fact, we also log the same message for every device in the hierarchy below the Root Port. Log the "Signaling PME" once (only for the Root Port, since we can trivially find out which devices are below the Root Port), and include the IRQ number in the message to help connect the dots with /proc/interrupts. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-12PCI/PME: Drop unused support for PMEs from Root Complex Event CollectorsBjorn Helgaas
Since we register pcie_pme_driver only for PCI_EXP_TYPE_ROOT_PORT, the PME driver never claims Root Complex Event Collectors. Remove unused code related to Root Complex Event Collectors. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-08PCI/ASPM: Don't retrain link if ASPM not possibleDavid Daney
Some (defective) PCIe devices are not able to reliably do link retraining. Check to see if ASPM is possible between link partners before configuring common clocking, and doing the resulting link retraining. If ASPM is not possible, there is no reason to risk losing access to a device due to an unnecessary link retraining. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-11-23PCI: Export pcie_find_root_portJohannes Thumshirn
Export pcie_find_root_port() so we can use it outside of PCIe-AER error injection. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-11-17PCI: Consolidate conditions to allow runtime PM on PCIe portsLukas Wunner
The conditions to allow runtime PM on PCIe ports are currently spread across two different files: The condition relating to hotplug ports is located in portdrv_pci.c whereas all other conditions are located in pci.c. Consolidate all conditions in a single place in pci.c, thus making it easier to follow the logic and amend conditions down the road. Note that the condition relating to hotplug ports is inserted *before* the condition relating to the "pcie_port_pm=force" command line option, so runtime PM is not afforded to hotplug ports even if this option is given. That's exactly how the code behaved up until now. If this is not desired, the ordering of the conditions can simply be reversed. No functional change intended. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17PCI: Activate runtime PM on a PCIe port only if it can suspendLukas Wunner
Currently pcie_portdrv_probe() activates runtime PM on a PCIe port even if it will never actually suspend because the BIOS is too old or the "pcie_port_pm=off" option was specified on the kernel command line. A few CPU cycles can be saved by not activating runtime PM at all in these cases, because rpm_idle() and rpm_suspend() will bail out right at the beginning when calling rpm_check_suspend_allowed(), instead of carrying out various locking and assignments, invoking rpm_callback(), getting back -EBUSY and rolling everything back. The conditions checked in pci_bridge_d3_possible() are all static, they never change during uptime of the system, hence it's safe to call this to determine if runtime PM should be activated. No functional change intended. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-14PCI/ASPM: Use permission-specific DEVICE_ATTR variantsJulia Lawall
Use DEVICE_ATTR_RW for read-write attributes. This simplifies the source code, improves readability, and reduces the chance of inconsistencies. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @rw@ declarer name DEVICE_ATTR; identifier x,x_show,x_store; @@ DEVICE_ATTR(x, \(0644\|S_IRUGO|S_IWUSR\), x_show, x_store); @script:ocaml@ x << rw.x; x_show << rw.x_show; x_store << rw.x_store; @@ if not (x^"_show" = x_show && x^"_store" = x_store) then Coccilib.include_match false @@ declarer name DEVICE_ATTR_RW; identifier rw.x,rw.x_show,rw.x_store; @@ - DEVICE_ATTR(x, \(0644\|S_IRUGO|S_IWUSR\), x_show, x_store); + DEVICE_ATTR_RW(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-03Merge branch 'pci/aer' into nextBjorn Helgaas
* pci/aer: PCI/AER: Fix aer_probe() kernel-doc comment PCI/AER: Cache capability position PCI/AER: Avoid memory allocation in interrupt handling path ACPI / APEI: Send correct severity to calculate AER severity PCI/AER: Remove duplicate AER severity translation PCI/AER: Remove aerdriver.forceload kernel parameter PCI/AER: Remove aerdriver.nosourceid kernel parameter x86/PCI: VMD: Add quirk for AER to ignore source ID PCI/AER: Add bus flag to skip source ID matching Conflicts: drivers/pci/probe.c
2016-09-30PCI/AER: Fix aer_probe() kernel-doc commentCao jin
0516c8bcd252 ("PCI: PCIe portdrv: Simplily probe callback of service drivers") removed the "id" argument of aer_probe() but neglected to remove the kernel-doc comment. Update the comment. [bhelgaas: changelog] Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-27PCI/AER: Cache capability positionKeith Busch
Save the position of the error reporting capability so it doesn't need to be rediscovered during error handling. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Lukas Wunner <lukas@wunner.de>
2016-09-27PCI/AER: Avoid memory allocation in interrupt handling pathJon Derrick
When handling AER events, we previously allocated a struct aer_err_info, processed the error, and freed the struct. But aer_isr_one_error() is serialized by rpc_mutex, so we never need more than one copy of the struct, and the struct is only about 70 bytes, so we're not saving much by allocating it dynamically. Embed a struct aer_err_info directly in struct aer_rpc, which is allocated at probe-time by aer_probe(). [bhelgaas: changelog] Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-20PCI/AER: Remove duplicate AER severity translationTyler Baicar
Currently the AER severity is being translated twice in the code flow for PCIe errors. It is first translated in ghes_do_proc() before calling into the AER driver. Then it is translated again when the AER driver calls cper_print_aer(). This causes the severity that is used in cper_print_aer() to be incorrect. Remove the second translation that is in cper_print_aer() since this function is already receiving the correct AER severity. Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Borislav Petkov <bp@suse.de>
2016-09-14PCI/AER: Remove aerdriver.forceload kernel parameterBjorn Helgaas
Per the PCI Firmware spec, r3.0, sec 4.5.1, on ACPI systems, the OS must not use AER unless _OSC is present and _OSC grants AER control to the OS. The aerdriver.forceload kernel parameter was a way to enable Linux AER support on ACPI systems that lack _OSC or fail to grant control the the OS. Enabling Linux AER support when the firmware doesn't want us to is a recipe for problems, e.g., the firmware might be handling AER itself. Remove the aerdriver.forceload kernel parameter and related supporting code. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-14PCI/AER: Remove aerdriver.nosourceid kernel parameterBjorn Helgaas
The aerdriver.nosourceid kernel parameter was intended for working around broken chipsets don't supply the source ID for AER events. We recently added PCI_BUS_FLAGS_NO_AERSID, which can be set by quirks for the same purpose. Remove the aerdriver.nosourceid kernel parameter. For anything other than debugging, asking users to find and use kernel parameters is a poor user experience. Instead, we should add PCI_BUS_FLAGS_NO_AERSID quirks for any hardware that needs it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-06PCI/AER: Add bus flag to skip source ID matchingJon Derrick
Allow root port buses to choose to skip source id matching when finding the faulting device. Certain root port devices may return an incorrect source ID and recommend to scan child device registers for AER notifications. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-01Merge branch 'pci/ptm' into nextBjorn Helgaas
* pci/ptm: PCI: Add PTM clock granularity information PCI: Add pci_enable_ptm() for drivers to enable PTM on endpoints PCI: Add Precision Time Measurement (PTM) support
2016-08-25PCI: Add PTM clock granularity informationBjorn Helgaas
The PTM Control register (PCIe r3.1, sec 7.32.3) contains an Effective Granularity field: This provides information relating to the expected accuracy of the PTM clock, but does not otherwise affect the PTM mechanism. Set the Effective Granularity based on the PTM Root and any intervening PTM Time Sources. This does not set Effective Granularity for Root Complex Integrated Endpoints because I don't know how to figure out clock granularity for them. The spec says: ... system software must set [Effective Granularity] to the value reported in the Local Clock Granularity field by the associated PTM Time Source. but I don't know how to identify the associated PTM Time Source. Normally it's the upstream bridge, but an integrated endpoint has no upstream bridge. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-08-24PCI/AER: Make explicitly non-modularPaul Gortmaker
This code is not being built as a module by anyone: obj-$(CONFIG_PCIEAER) += aerdriver.o aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o drivers/pci/pcie/aer/Kconfig:config PCIEAER drivers/pci/pcie/aer/Kconfig: bool "Root Port Advanced Error Reporting support" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Note that for non-modular code, module_init() translates to device_initcall(). [bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Tom Long Nguyen <tom.l.nguyen@intel.com>
2016-08-24PCI/PME: Make explicitly non-modularPaul Gortmaker
This code is not being built as a module by anyone: config PCIE_PME def_bool y depends on PCIEPORTBUS && PM Remove traces of modularity so that when reading the driver there is no doubt it is builtin-only. Also delete the .remove function, since that doesn't seem to have a sensible use case. With "normal" endpoint drivers, we have in the past set the suppress_bind_attrs bit to make it clear that the use of ".remove" in a builtin driver was deleted, but here for PCI, it seems overkill to jump through the pcie_port_service_driver and into the struct device_driver in order to finally try and do something similar with the bind setting. Note that for non-modular code, module_init() translates to device_initcall(). Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-08-24PCI: Make DPC explicitly non-modularPaul Gortmaker
This code is not being built as a module by anyone: drivers/pci/pcie/Kconfig:config PCIE_DPC drivers/pci/pcie/Kconfig: bool "PCIe Downstream Port Containment support" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Note that for non-modular code, module_init() translates to device_initcall(). [bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Keith Busch <keith.busch@intel.com> CC: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-08-23PCI: portdrv: Make explicitly non-modularPaul Gortmaker
This code is not being built as a module by anyone: pcieportdrv-y := portdrv_core.o portdrv_pci.o portdrv_bus.o obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o drivers/pci/pcie/Kconfig:config PCIEPORTBUS drivers/pci/pcie/Kconfig: bool "PCI Express Port Bus support" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Note that for non-modular code, MODULE_DEVICE_TABLE is a no-op and module_init() translates to device_initcall(). [bhelgaas: changelog, remove unused DRIVER_* macros] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Tom Long Nguyen <tom.l.nguyen@intel.com>
2016-08-18PCI: Add pci_enable_ptm() for drivers to enable PTM on endpointsBjorn Helgaas
Add an pci_enable_ptm() interface so drivers can enable PTM. The PCI core enables PTM on PTM Roots and switches automatically, but we don't enable PTM on endpoints unless a driver requests it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-08-15PCI: Add Precision Time Measurement (PTM) supportJonathan Yong
Add Precision Time Measurement (PTM) support (see PCIe r3.1, sec 6.22). Enable PTM on PTM Root devices and switch ports. This does not enable PTM on endpoints. There currently are no PTM-capable devices on the market, but it is expected to be supported by the Intel Apollo Lake platform. [bhelgaas: complete rework] Signed-off-by: Jonathan Yong <jonathan.yong@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-08-01Merge branches 'pci/aspm', 'pci/dpc', 'pci/hotplug', 'pci/misc', 'pci/msi', ↵Bjorn Helgaas
'pci/pm' and 'pci/virtualization' into next * pci/aspm: PCI/ASPM: Remove redundant check of pcie_set_clkpm * pci/dpc: PCI: Remove DPC tristate module option PCI: Bind DPC to Root Ports as well as Downstream Ports PCI: Fix whitespace in struct dpc_dev PCI: Convert Downstream Port Containment driver to use devm_* functions * pci/hotplug: PCI: Allow additional bus numbers for hotplug bridges * pci/misc: PCI: Include <asm/dma.h> for isa_dma_bridge_buggy PCI: Make bus_attr_resource_alignment static MAINTAINERS: Add file patterns for PCI device tree bindings PCI: Fix comment typo * pci/msi: PCI/MSI: irqchip: Fix PCI_MSI dependencies * pci/pm: PCI: pciehp: Ignore interrupts during D3cold PCI: Document connection between pci_power_t and hardware PM capability PCI: Add runtime PM support for PCIe ports ACPI / hotplug / PCI: Runtime resume bridge before rescan PCI: Power on bridges before scanning new devices PCI: Put PCIe ports into D3 during suspend PCI: Don't clear d3cold_allowed for PCIe ports PCI / PM: Enforce type casting for pci_power_t * pci/virtualization: PCI: Add ACS quirk for Solarflare SFC9220 PCI: Add DMA alias quirk for Adaptec 3805 PCI: Mark Atheros AR9485 and QCA9882 to avoid bus reset PCI: Add function 1 DMA alias quirk for Marvell 88SE9182
2016-07-25PCI: Remove DPC tristate module optionKeith Busch
Change the Downstream Port Containment config type from tristate to bool. The driver doesn't automatically load based on any rules, so it needs to be built-in in order to bind to devices it needs to drive. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-07-25PCI: Bind DPC to Root Ports as well as Downstream PortsKeith Busch
PCIe port type values are not flags, so OR'ing them is not correct. Previously the result was equivalent to PCIe Downstream Ports, so we were missing binding to DPC-capable Root Ports. Change the type to 'any' so we can bind to both port types. While this will cause the code to check Upstream Ports, the driver won't claim them since they are not DPC-capable. Reported-by: Alexander Antonov <alexanderx.v.antonov@intel.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-06-21PCI: Fix whitespace in struct dpc_devMika Westerberg
Remove unnecessary spaces before tabs. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Keith Busch <keith.busch@intel.com>