summaryrefslogtreecommitdiff
path: root/drivers/pci/quirks.c
AgeCommit message (Collapse)Author
2024-01-17Merge tag 'pci-v6.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Reserve ECAM so we don't assign it to PCI BARs; this works around bugs where BIOS included ECAM in a PNP0A03 host bridge window, didn't reserve it via a PNP0C02 motherboard device, and didn't allocate space for SR-IOV VF BARs (Bjorn Helgaas) - Add MMCONFIG/ECAM debug logging (Bjorn Helgaas) - Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas) - Log device type (Root Port, Switch Port, etc) during enumeration (Bjorn Helgaas) - Log bridges before downstream devices so the dmesg order is more logical (Bjorn Helgaas) - Log resource names (BAR 0, VF BAR 0, bridge window, etc) consistently instead of a mix of names and "reg 0x10" (Puranjay Mohan, Bjorn Helgaas) - Fix 64GT/s effective data rate calculation to use 1b/1b encoding rather than the 8b/10b or 128b/130b used by lower rates (Ilpo Järvinen) - Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI lpfc (Ilpo Järvinen) - Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen) Resource management: - Restructure pci_dev_for_each_resource() to avoid computing the address of an out-of-bounds array element (the bounds check was performed later so the element was never actually *read*, but it's nicer to avoid even computing an out-of-bounds address) (Andy Shevchenko) Driver binding: - Convert pci-host-common.c platform .remove() callback to .remove_new() returning 'void' since it's not useful to return error codes here (Uwe Kleine-König) - Convert exynos, keystone, kirin from .remove() to .remove_new(), which returns void instead of int (Uwe Kleine-König) - Drop unused struct pci_driver.node member (Mathias Krause) Virtualization: - Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc) Error handling: - Log AER errors as "Correctable" (not "Corrected") or "Uncorrectable" to match spec terminology (Bjorn Helgaas) - Decode Requester ID when no error info found instead of printing the raw hex value (Bjorn Helgaas) Endpoint framework: - Use a unique test pattern for each BAR in the pci_endpoint_test to make it easier to debug address translation issues (Niklas Cassel) Broadcom STB PCIe controller driver: - Add DT property "brcm,clkreq-mode" and driver support for different CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan) Freescale Layerscape PCIe controller driver: - Add suspend/resume support for Layerscape LS1043a and LS1021a, including software-managed PME_Turn_Off and transitions between L0, L2/L3_Ready Link states (Frank Li) MediaTek PCIe controller driver: - Clear MSI interrupt status before handler to avoid missing MSIs that occur after the handler (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Update mediatek-gen3 translation window setup to handle MMIO space that is not a power of two in size (Jianjun Wang) Qualcomm PCIe controller driver: - Increase qcom iommu-map maxItems to accommodate SDX55 (five entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski) - Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof Kozlowski) - Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof Kozlowski) - Correct the qcom "reset-name" property, previously incorrectly called "reset-names" (Krzysztof Kozlowski) - Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil Armstrong) Renesas R-Car PCIe controller driver: - Replace of_device.h with explicit of.h include to untangle header usage (Rob Herring) - Add DT and driver support for optional miniPCIe 1.5v and 3.3v regulators on KingFisher (Wolfram Sang) SiFive FU740 PCIe controller driver: - Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to ARCH_SIFIVE (Conor Dooley) Synopsys DesignWare PCIe controller driver: - Align iATU mapping for endpoint MSI-X (Niklas Cassel) - Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro Shimoda) - Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro Shimoda) - Rename struct dw_pcie_ep_ops.func_conf_select() to .get_dbi_offset() to be more descriptive (Yoshihiro Shimoda) - Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro Shimoda) TI J721E PCIe driver: - Add j721e DT and driver support for 'num-lanes' for devices that support x1, x2, or x4 Links (Matt Ranostay) - Add j721e DT compatible strings and driver support for j784s4 (Matt Ranostay) - Make TI J721E Kconfig depend on ARCH_K3 since the hardware is specific to those TI SoC parts (Peter Robinson) TI Keystone PCIe controller driver: - Hold power management references to all PHYs while enabling them to avoid a race when one provides clocks to others (Siddharth Vadapalli) Xilinx XDMA PCIe controller driver: - Remove redundant dev_err(), since platform_get_irq() and platform_get_irq_byname() already log errors (Yang Li) - Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() (Krzysztof Wilczyński) - Fix xilinx_pl_dma_pcie_init_irq_domain() error return when irq_domain_add_linear() fails (Harshit Mogalapalli) MicroSemi Switchtec management driver: - Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm ioremapping in switchtec_pci_probe(). Previously the cleanup was done in stdev_release(), which used stale pointers if stdev->cdev happened to be open when the PCI device was removed (Daniel Stodden) Miscellaneous: - Convert interrupt terminology from "legacy" to "INTx" to be more specific and match spec terminology (Damien Le Moal) - In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of deprecated ida_simple_*() API with ida_alloc() and ida_free() (Christophe JAILLET)" * tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Fix kernel-doc issues PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode" PCI: mediatek-gen3: Fix translation window size calculation PCI: mediatek: Clear interrupt status before dispatching handler PCI: keystone: Fix race condition when initializing PHYs PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain() PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members misc: pci_endpoint_test: Use a unique test pattern for each BAR PCI: j721e: Make TI J721E depend on ARCH_K3 PCI: j721e: Add TI J784S4 PCIe configuration PCI/AER: Use explicit register sizes for struct members PCI/AER: Decode Requester ID when no error info found PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors ...
2024-01-15Merge branch 'pci/virtualization'Bjorn Helgaas
- Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc) * pci/virtualization: PCI: Add ACS quirk for more Zhaoxin Root Ports
2024-01-15Merge branch 'pci/enumeration-logging'Bjorn Helgaas
- Log device type (Root Port, Switch Port, etc) during enumeration (Bjorn Helgaas) - Log resource names (BAR 0, VF BAR 0, bridge window, etc) consistently instead of a mix of names and "reg 0x10" (Puranjay Mohan, Bjorn Helgaas) - Log bridges before devices below the bridges (Bjorn Helgaas) * pci/enumeration-logging: PCI: Log bridge info when first enumerating bridge PCI: Log bridge windows conditionally PCI: Supply bridge device, not secondary bus, to read window details PCI: Move pci_read_bridge_windows() below individual window accessors PCI: Use resource names in PCI log messages PCI: Update BAR # and window messages PCI: Log device type during enumeration
2023-12-15PCI: Use resource names in PCI log messagesPuranjay Mohan
Use the pci_resource_name() to get the name of the resource and use it while printing log messages. [bhelgaas: rename to match struct resource * names, also use names in other BAR messages] Link: https://lore.kernel.org/r/20211106112606.192563-3-puranjay12@gmail.com Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-12-11PCI: Add ACS quirk for more Zhaoxin Root PortsLeoLiuoc
Add more Root Port Device IDs to pci_quirk_zhaoxin_pcie_ports_acs() for some new Zhaoxin platforms. Fixes: 299bd044a6f3 ("PCI: Add ACS quirk for Zhaoxin Root/Downstream Ports") Link: https://lore.kernel.org/r/20231211091543.735903-1-LeoLiu-oc@zhaoxin.com Signed-off-by: LeoLiuoc <LeoLiu-oc@zhaoxin.com> [bhelgaas: update subject, drop changelog, add Fixes, add stable tag, fix whitespace, wrap code comment] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 5.7
2023-11-20PCI: Only override AMD USB controller if requiredGuilherme G. Piccoli
By running a Van Gogh device (Steam Deck), the following message was noticed in the kernel log: pci 0000:04:00.3: PCI class overridden (0x0c03fe -> 0x0c03fe) so dwc3 driver can claim this instead of xhci Effectively this means the quirk executed but changed nothing, since the class of this device was already the proper one (likely adjusted by newer firmware versions). Check and perform the override only if necessary. Link: https://lore.kernel.org/r/20231120160531.361552-1-gpiccoli@igalia.com Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Huang Rui <ray.huang@amd.com> Cc: Vicki Pfau <vi@endrift.com>
2023-11-18PCI: Add no PM reset quirk for NVIDIA Spectrum devicesIdo Schimmel
Spectrum-{1,2,3,4} devices report that a D3hot->D0 transition causes a reset (i.e., they advertise NoSoftRst-). However, this transition does not have any effect on the device: It continues to be operational and network ports remain up. Advertising this support makes it seem as if a PM reset is viable for these devices. Mark it as unavailable to skip it when testing reset methods. Before: # cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method pm bus After: # cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method bus Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-28Merge branch 'pci/misc'Bjorn Helgaas
- Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device so dwc3 can claim it instead (Vicki Pfau) - Make pci_assign_unassigned_resources() non-init because sparc uses it after init-time (Randy Dunlap) - Remove logic_outb(), _outw(), outl() duplicate declarations (John Sanpe) - Remove unnecessary UTF-8 in Kconfig help text that confuses menuconfig (Liu Song) - Fix double free in __pci_epc_create() (Dan Carpenter) - Simplify pcie_capability_clear_and_set_word() cases that could be pcie_capability_clear_word() (Ilpo Järvinen) * pci/misc: PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word() PCI: endpoint: Fix double free in __pci_epc_create() PCI: Replace unnecessary UTF-8 in Kconfig logic_pio: Remove logic_outb(), _outw(), outl() duplicate declarations PCI: Make pci_assign_unassigned_resources() non-init PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device
2023-10-28Merge branch 'pci/field-get'Bjorn Helgaas
- Use FIELD_GET()/FIELD_PREP() when possible throughout drivers/pci/ (Ilpo Järvinen, Bjorn Helgaas) - Rework DPC control programming for clarity (Ilpo Järvinen) * pci/field-get: PCI/portdrv: Use FIELD_GET() PCI/VC: Use FIELD_GET() PCI/PTM: Use FIELD_GET() PCI/PME: Use FIELD_GET() PCI/ATS: Use FIELD_GET() PCI/ATS: Show PASID Capability register width in bitmasks PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk PCI: Use FIELD_GET() PCI/MSI: Use FIELD_GET/PREP() PCI/DPC: Use defines with DPC reason fields PCI/DPC: Use defined fields with DPC_CTL register PCI/DPC: Use FIELD_GET() PCI: hotplug: Use FIELD_GET/PREP() PCI: dwc: Use FIELD_GET/PREP() PCI: cadence: Use FIELD_GET() PCI: Use FIELD_GET() to extract Link Width PCI: mvebu: Use FIELD_PREP() with Link Width PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields # Conflicts: # drivers/pci/controller/dwc/pcie-tegra194.c
2023-10-28Merge branch 'pci/config-errs'Bjorn Helgaas
- Simplify config accessor error checking (Ilpo Järvinen) * pci/config-errs: scsi: ipr: Do PCI error checks on own line PCI: xgene: Do PCI error check on own line & keep return value PCI: Do error check on own line to split long "if" conditions atm: iphase: Do PCI error checks on own line sh: pci: Do PCI error check on own line alpha: Streamline convoluted PCI error handling
2023-10-28Merge branch 'pci/reset'Bjorn Helgaas
- Lengthen reset delay for VideoPropulsion Torrent QN16e card, which seems to require longer delay than spec requires (Lukas Wunner) * pci/reset: PCI: Lengthen reset delay for VideoPropulsion Torrent QN16e card
2023-10-28Merge branch 'pci/enumeration'Bjorn Helgaas
- Add and use pci_get_base_class() to search for all PCI_BASE_CLASS_DISPLAY devices (Sui Jingfeng) - Fix a vmd check for multi-function devices (Ilpo Järvinen) - Add PCI_HEADER_TYPE_MFD and use it to replace literals (Ilpo Järvinen) - Use acpi_evaluate_dsm_typed() instead of open-coding it (Andy Shevchenko) - Keep .remove() and .probe() callbacks (previously marked __init) in case they're used via sysfs (Uwe Kleine-König) * pci/enumeration: PCI: keystone: Don't discard .probe() callback PCI: keystone: Don't discard .remove() callback PCI: kirin: Don't discard .remove() callback PCI: exynos: Don't discard .remove() callback PCI/ACPI: Use acpi_evaluate_dsm_typed() PCI: Use PCI_HEADER_TYPE_* instead of literals PCI: Add PCI_HEADER_TYPE_MFD definition PCI: vmd: Correct PCI Header Type Register's multi-function check drm/radeon: Use pci_get_base_class() to reduce duplicated code drm/amdgpu: Use pci_get_base_class() to reduce duplicated code drm/nouveau: Use pci_get_base_class() to reduce duplicated code ALSA: hda: Use pci_get_base_class() to reduce duplicated code PCI: Add pci_get_base_class() helper
2023-10-26PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()Ilpo Järvinen
When using pcie_capability_clear_and_set_word() but not actually *setting* anything, use pcie_capability_clear_word() instead. Link: https://lore.kernel.org/r/20231026121924.2164-1-ilpo.jarvinen@linux.intel.com Link: https://lore.kernel.org/r/20231026121924.2164-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: squash] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-24PCI/DPC: Use FIELD_GET()Bjorn Helgaas
Use FIELD_GET() to remove dependencies on the field position, i.e., the shift value. No functional change intended. Link: https://lore.kernel.org/r/20231018113254.17616-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-18PCI: Disable ATS for specific Intel IPU E2000 devicesBartosz Pawlowski
Due to a hardware issue in A and B steppings of Intel IPU E2000, it expects wrong endianness in ATS invalidation message body. This problem can lead to outdated translations being returned as valid and finally cause system instability. To prevent such issues, add quirk_intel_e2000_no_ats() to disable ATS for vulnerable IPU E2000 devices. Link: https://lore.kernel.org/r/20230908143606.685930-3-bartosz.pawlowski@intel.com Signed-off-by: Bartosz Pawlowski <bartosz.pawlowski@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
2023-10-18PCI: Extract ATS disabling to a helper functionBartosz Pawlowski
Introduce quirk_no_ats() helper function to provide a standard way to disable ATS capability in PCI quirks. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230908143606.685930-2-bartosz.pawlowski@intel.com Signed-off-by: Bartosz Pawlowski <bartosz.pawlowski@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-10-10PCI: Do error check on own line to split long "if" conditionsIlpo Järvinen
Placing PCI error code check inside "if" condition usually results in need to split lines. Combined with additional conditions the "if" condition becomes messy. Convert to the usual error handling pattern with an additional variable to improve code readability. In addition, reverse the logic in pci_find_vsec_capability() to get rid of &&. No functional changes intended. Link: https://lore.kernel.org/r/20230911125354.25501-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: PCI_POSSIBLE_ERROR()] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-05PCI: Prevent xHCI driver from claiming AMD VanGogh USB3 DRD deviceVicki Pfau
The AMD VanGogh SoC contains a DesignWare USB3 Dual-Role Device that can be operated as either a USB Host or a USB Device, similar to on the AMD Nolan platform. be6646bfbaec ("PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD device") added a quirk to let the dwc3 driver claim the Nolan device since it provides more specific support. Extend that quirk to include the VanGogh SoC USB3 device. Link: https://lore.kernel.org/r/20230927202212.2388216-1-vi@endrift.com Signed-off-by: Vicki Pfau <vi@endrift.com> [bhelgaas: include be6646bfbaec reference, add stable tag] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v3.19+
2023-10-03PCI: Use PCI_HEADER_TYPE_* instead of literalsIlpo Järvinen
Replace literals under drivers/pci/ with PCI_HEADER_TYPE_MASK, PCI_HEADER_TYPE_NORMAL, and PCI_HEADER_TYPE_MFD. Also replace !! boolean conversions with FIELD_GET(). Link: https://lore.kernel.org/r/20231003125300.5541-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # for Renesas R-Car
2023-09-28PCI: Lengthen reset delay for VideoPropulsion Torrent QN16e cardLukas Wunner
Commit ac91e6980563 ("PCI: Unify delay handling for reset and resume") shortened an unconditional 1 sec delay after a Secondary Bus Reset to 100 msec for PCIe (per PCIe r6.1 sec 6.6.1). The 1 sec delay is only required for Conventional PCI. But it turns out that there are PCIe devices which require a longer delay than prescribed before first config space access after reset recovery or resume from D3cold: Chad reports that a "VideoPropulsion Torrent QN16e" MPEG QAM Modulator "raises a PCI system error (PERR), as reported by the IPMI event log, and the hardware itself would suffer a catastrophic event, cycling the server" unless the longer delay is observed. The card is specified to conform to PCIe r1.0 and indeed only supports Gen1 speed (2.5 GT/s) according to lspci. PCIe r1.0 sec 7.6 prescribes the same 100 msec delay as PCIe r6.1 sec 6.6.1: To allow components to perform internal initialization, system software must wait for at least 100 ms from the end of a reset (cold/warm/hot) before it is permitted to issue Configuration Requests The behavior of the Torrent QN16e card thus appears to be a quirk. Treat it as such and lengthen the reset delay for this specific device. Fixes: ac91e6980563 ("PCI: Unify delay handling for reset and resume") Link: https://lore.kernel.org/r/47727e792c7f0282dc144e3ec8ce8eb6e713394e.1695304512.git.lukas@wunner.de Reported-by: Chad Schroeder <CSchroeder@sonifi.com> Closes: https://lore.kernel.org/linux-pci/DM6PR16MB2844903E34CAB910082DF019B1FAA@DM6PR16MB2844.namprd16.prod.outlook.com/ Tested-by: Chad Schroeder <CSchroeder@sonifi.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.4+
2023-09-08Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset"Bjorn Helgaas
This reverts commit d5af729dc2071273f14cbb94abbc60608142fd83. d5af729dc207 ("PCI: Mark NVIDIA T4 GPUs to avoid bus reset") avoided Secondary Bus Reset on the T4 because the reset seemed to not work when the T4 was directly attached to a Root Port. But NVIDIA thinks the issue is probably related to some issue with the Root Port, not with the T4. The T4 provides neither PM nor FLR reset, so masking bus reset compromises this device for assignment scenarios. Revert d5af729dc207 as requested by Wu Zongyong. This will leave SBR broken in the specific configuration Wu tested, as it was in v6.5, so Wu will debug that further. Link: https://lore.kernel.org/r/ZPqMCDWvITlOLHgJ@wuzongyong-alibaba Link: https://lore.kernel.org/r/20230908201104.GA305023@bhelgaas Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-08-30Merge tag 'pci-v6.6-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Add locking to read/modify/write PCIe Capability Register accessors for Link Control and Root Control - Use pci_dev_id() when possible instead of manually composing ID from dev->bus->number and dev->devfn Resource management: - Move prototypes for __weak sysfs resource files to linux/pci.h to fix 'no previous prototype' warnings - Make more I/O port accesses depend on HAS_IOPORT - Use devm_platform_get_and_ioremap_resource() instead of open-coding platform_get_resource() followed by devm_ioremap_resource() Power management: - Ensure devices are powered up while accessing VPD - If device is powered-up, keep it that way while polling for PME - Only read PCI_PM_CTRL register when available, to avoid reading the wrong register and corrupting dev->current_state Virtualization: - Avoid Secondary Bus Reset on NVIDIA T4 GPUs Error handling: - Remove unused pci_disable_pcie_error_reporting() - Unexport pci_enable_pcie_error_reporting(), used only by aer.c - Unexport pcie_port_bus_type, used only by PCI core VGA: - Simplify and clean up typos in VGA arbiter Apple PCIe controller driver: - Initialize pcie->nvecs (number of available MSIs) before use Broadcom iProc PCIe controller driver: - Use of_property_read_bool() instead of low-level accessors for boolean properties Broadcom STB PCIe controller driver: - Assert PERST# when probing BCM2711 because some bootloaders don't do it Freescale i.MX6 PCIe controller driver: - Add .host_deinit() callback so we can clean up things like regulators on probe failure or driver unload Freescale Layerscape PCIe controller driver: - Add support for link-down notification so the endpoint driver can process LINK_DOWN events - Add suspend/resume support, including manual PME_Turn_off/PME_TO_Ack handshake - Save Link Capabilities during probe so they can be restored when handling a link-up event, since the controller loses the Link Width and Link Speed values during reset Intel VMD host bridge driver: - Fix disable of bridge windows during domain reset; previously we cleared the base/limit registers, which actually left the windows enabled Marvell MVEBU PCIe controller driver: - Remove unused busn member Microchip PolarFlare PCIe controller driver: - Fix interrupt bit definitions so the SEC and DED interrupt handlers work correctly - Make driver buildable as a module - Read FPGA MSI configuration parameters from hardware instead of hard-coding them Microsoft Hyper-V host bridge driver: - To avoid a NULL pointer dereference, skip MSI restore after hibernate if MSI/MSI-X hasn't been enabled NVIDIA Tegra194 PCIe controller driver: - Revert 'PCI: tegra194: Enable support for 256 Byte payload' because Linux doesn't know how to reduce MPS from to 256 to 128 bytes for endpoints below a switch (because other devices below the switch might already be operating), which leads to 'Malformed TLP' errors Qualcomm PCIe controller driver: - Add DT and driver support for interconnect bandwidth voting for 'pcie-mem' and 'cpu-pcie' interconnects - Fix broken SDX65 'compatible' DT property - Configure controller so MHI bus master clock will be switched off while in ASPM L1.x states - Use alignment restriction from EPF core in EPF MHI driver - Add Endpoint eDMA support - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driversupport - Add MHI eDMA support - Add Snapdragon SM8450 support to the EPF MHI driver - Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup latency - Add sa8775p DT binding and driver support Rockchip PCIe controller driver: - Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the upper 32 bits SiFive FU740 PCIe controller driver: - Set the supported number of MSI vectors so we can use all available MSI interrupts Synopsys DesignWare PCIe controller driver: - Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and dw_pcie_resume_noirq()) to be called by controller driver suspend/resume ops, and a controller callback to send PME_Turn_Off MicroSemi Switchtec management driver: - Add support for PCIe Gen5 devices Miscellaneous: - Reorder and compress to reduce size of struct pci_dev - Fix race in DOE destroy_work_on_stack() - Add stubs to avoid casts between incompatible function types - Explicitly include correct DT includes to untangle headers" * tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits) PCI: qcom-ep: Add ICC bandwidth voting support dt-bindings: PCI: qcom: ep: Add interconnects path PCI: qcom-ep: Treat unknown IRQ events as an error dt-bindings: PCI: qcom: Fix SDX65 compatible PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API PCI: epf-mhi: Use iATU for small transfers PCI: epf-mhi: Add support for SM8450 PCI: epf-mhi: Add eDMA support PCI: qcom-ep: Add eDMA support PCI: epf-mhi: Make use of the alignment restriction from EPF core PCI/PM: Only read PCI_PM_CTRL register when available PCI: qcom: Add support for sa8775p SoC dt-bindings: PCI: qcom: Add sa8775p compatible PCI: qcom-ep: Pass alignment restriction to the EPF core PCI: Simplify pcie_capability_clear_and_set_word() control flow PCI: Tidy config space save/restore messages PCI: Fix code formatting inconsistencies PCI: Fix typos in docs and comments PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos PCI: Simplify pci_dev_driver() ...
2023-08-29Merge branch 'pci/misc'Bjorn Helgaas
- Reorder struct pci_dev to avoid holes and reduce size (Christophe JAILLET) - Change pdev->rom_attr_enabled to single bit since it's only a boolean value (Christophe JAILLET) - Use struct_size() in pirq_convert_irt_table() instead of hand-writing it (Christophe JAILLET) - Explicitly include correct DT includes to untangle headers (Rob Herring) - Fix a DOE race between destroy_work_on_stack() and the stack-allocated task->work struct going out of scope in pci_doe() (Ira Weiny) - Use pci_dev_id() when possible instead of manually composing ID from dev->bus->number and dev->devfn (Xiongfeng Wang, Zheng Zengkai) - Move pci_create_resource_files() declarations to linux/pci.h for alpha build warnings (Arnd Bergmann) - Remove unused hotplug function declarations (Yue Haibing) - Remove unused mvebu struct mvebu_pcie.busn (Pali Rohár) - Unexport pcie_port_bus_type (Bjorn Helgaas) - Remove unnecessary sysfs ID local variable initialization (Bjorn Helgaas) - Fix BAR value printk formatting to accommodate 32-bit values (Bjorn Helgaas) - Use consistent pointer types for config access syscall get_user() and put_user() uses (Bjorn Helgaas) - Simplify AER_RECOVER_RING_SIZE definition (Bjorn Helgaas) - Simplify pci_pio_to_address() (Bjorn Helgaas) - Simplify pci_dev_driver() (Bjorn Helgaas) - Fix pci_bus_resetable(), pci_slot_resetable() name typos (Bjorn Helgaas) - Fix code and doc typos and code formatting (Bjorn Helgaas) - Tidy config space save/restore messages (Bjorn Helgaas) * pci/misc: PCI: Tidy config space save/restore messages PCI: Fix code formatting inconsistencies PCI: Fix typos in docs and comments PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos PCI: Simplify pci_dev_driver() PCI: Simplify pci_pio_to_address() PCI/AER: Simplify AER_RECOVER_RING_SIZE definition PCI: Use consistent put_user() pointer types PCI: Fix printk field formatting PCI: Remove unnecessary initializations PCI: Unexport pcie_port_bus_type PCI: mvebu: Remove unused busn member PCI: Remove unused function declarations PCI/sysfs: Move declarations to linux/pci.h PCI/P2PDMA: Use pci_dev_id() to simplify the code PCI/IOV: Use pci_dev_id() to simplify the code PCI/AER: Use pci_dev_id() to simplify the code PCI: apple: Use pci_dev_id() to simplify the code PCI/DOE: Fix destroy_work_on_stack() race PCI: Explicitly include correct DT includes x86/PCI: Use struct_size() in pirq_convert_irt_table() PCI: Change pdev->rom_attr_enabled to single bit PCI: Reorder pci_dev fields to reduce holes
2023-08-29Merge branch 'pci/controller/switchtec'Bjorn Helgaas
- Add support for Switechtec PCIe Gen5 devices (Kelvin Cao) * pci/controller/switchtec: PCI: switchtec: Add support for PCIe Gen5 devices PCI: switchtec: Use normal comment style
2023-08-29Merge branch 'pci/virtualization'Bjorn Helgaas
- Avoid bus resets on NVIDIA T4 GPUs because they don't seem to recover (Wu Zongyong) * pci/virtualization: PCI: Mark NVIDIA T4 GPUs to avoid bus reset
2023-08-25PCI: Fix typos in docs and commentsBjorn Helgaas
Fix typos in docs and comments. Link: https://lore.kernel.org/r/20230824193712.542167-11-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-08-22of: unittest: Add pci_dt_testdrv pci driverLizhi Hou
pci_dt_testdrv is bound to QEMU PCI Test Device. It reads overlay_pci_node fdt fragment and apply it to Test Device. Then it calls of_platform_default_populate() to populate the platform devices. Tested-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://lore.kernel.org/r/1692120000-46900-6-git-send-email-lizhi.hou@amd.com Signed-off-by: Rob Herring <robh@kernel.org>
2023-08-22PCI: Add quirks to generate device tree node for Xilinx Alveo U50Lizhi Hou
The Xilinx Alveo U50 PCI card exposes multiple hardware peripherals on its PCI BAR. The card firmware provides a flattened device tree to describe the hardware peripherals on its BARs. This allows U50 driver to load the flattened device tree and generate the device tree node for hardware peripherals underneath. To generate device tree node for U50 card, add PCI quirks to call of_pci_make_dev_node() for U50. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://lore.kernel.org/r/1692120000-46900-4-git-send-email-lizhi.hou@amd.com Signed-off-by: Rob Herring <robh@kernel.org>
2023-08-09PCI: Mark NVIDIA T4 GPUs to avoid bus resetWu Zongyong
NVIDIA T4 GPUs do not work with SBR. This problem is found when the T4 card is direct attached to a Root Port only. Avoid bus reset by marking T4 GPUs PCI_DEV_FLAGS_NO_BUS_RESET. Fixes: 4c207e7121fa ("PCI: Mark some NVIDIA GPUs to avoid bus reset") Link: https://lore.kernel.org/r/2dcebea53a6eb9bd212ec6d8974af2e5e0333ef6.1681129861.git.wuzongyong@linux.alibaba.com Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-08-09PCI: switchtec: Add support for PCIe Gen5 devicesKelvin Cao
Advertise support of Gen5 devices in the driver's device ID table and add the same IDs for the switchtec quirks. Also update driver code to accommodate them. Link: https://lore.kernel.org/r/20230624000003.2315364-3-kelvin.cao@microchip.com Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2023-07-18PCI: Make quirk using inw() depend on HAS_IOPORTNiklas Schnelle
In the future inw() and friends will not be compiled on architectures without I/O port support. Co-developed-by: Arnd Bergmann <arnd@kernel.org> Link: https://lore.kernel.org/r/20230703135255.2202721-2-schnelle@linux.ibm.com Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-06-30Merge tag 'pci-v6.5-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Export pcie_retrain_link() for use outside ASPM - Add Data Link Layer Link Active Reporting as another way for pcie_retrain_link() to determine the link is up - Work around link training failures (especially on the ASMedia ASM2824 switch) by training first at 2.5GT/s and then attempting higher rates Resource management: - When we coalesce host bridge windows, remove invalidated resources from the resource tree so future allocations work correctly Hotplug: - Cancel bringup sequence if card is not present, to keep from blinking Power Indicator indefinitely - Reassign bridge resources if necessary for ACPI hotplug Driver binding: - Convert platform_device .remove() callbacks to return void instead of a mostly useless int Power management: - Reduce wait time for secondary bus to be ready to speed up resume - Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in D3cold - Call _REG when transitioning D-states so AML that uses the PCI config space OpRegion works, which fixes some ASMedia GPIO controllers after resume Virtualization: - Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM hang when guest is rebooted - Add function 1 DMA alias quirk for Marvell 88SE9235 Error handling: - Unexport pci_save_aer_state() since it's only used in drivers/pci/ - Drop recommendation for drivers to configure AER Capability, since the PCI core does this for all devices ASPM: - Disable ASPM on MFD function removal to avoid use-after-free - Tighten up pci_enable_link_state() and pci_disable_link_state() interfaces so they don't enable/disable states the driver didn't specify - Avoid link retraining race that can happen if ASPM sets link control parameters while the link is in the midst of training for some other reason Endpoint framework: - Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be different from "PCI Endpoint NTB driver" - Automatically create a function specific attributes group for endpoint drivers to avoid reference counting issues - Fix many EPC test issues - Return pci_epf_type_add_cfs() error if EPF has no driver - Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq() MSI vector parameters - Pass EPF device ID to driver probe functions - Return -EALREADY if EPC has already been started/stopped - Add linkdown notifier support and use it in qcom-ep - Add Bus Master Enable event support and use it in qcom-ep - Add Qualcomm Modem Host Interface (MHI) endpoint driver - Add Layerscape PME interrupt handling to manage link-up notification Cadence PCIe controller driver: - Wait for link retrain to complete when working around the J721E i2085 erratum with Gen2 mode Faraday FTPC100 PCI controller driver: - Release clock resources on error paths Freescale i.MX6 PCIe controller driver: - Save and restore Root Port MSI control to work around hardware defect Intel VMD host bridge driver: - Reset VMD config register between soft reboots - Capture pci_reset_bus() return value instead of printing junk when it fails Qualcomm PCIe controller driver: - Add SDX65 endpoint compatible string to DT binding - Disable register write access after init for IP v2.3.3, v2.9.0 - Use DWC helpers for enabling/disabling writes to DBI registers - Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2, v2.3.3, v2.7.0, v2.9.0 - Reuse v2.3.2 post-init sequence for v2.4.0 Renesas R-Car PCIe controller driver: - Remove unused static pcie_base and pcie_dev Rockchip PCIe controller driver: - Remove writes to unused registers - Write endpoint Device ID using correct register - Assert PCI Configuration Enable bit after probe so endpoint responds instead of generating Request Retry Status messages - Poll waiting for PHY PLLs to lock - Update RK3399 example DT binding to be valid - Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of manually generating PCIe message - Use multiple windows to avoid address translation conflicts - Use u32 (not u16) when accessing 32-bit registers - Hide MSI-X Capability, since RK3399 can't generate MSI-X - Set endpoint controller required alignment to 256 Synopsys DesignWare PCIe controller driver: - Wait for link to come up only if we've initiated link training Miscellaneous: - Add pci_clear_master() stub for non-CONFIG_PCI" * tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits) Documentation: PCI: correct spelling PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain() PCI: xgene-msi: Convert to platform remove callback returning void PCI: tegra: Convert to platform remove callback returning void PCI: rockchip-host: Convert to platform remove callback returning void PCI: mvebu: Convert to platform remove callback returning void PCI: mt7621: Convert to platform remove callback returning void PCI: mediatek-gen3: Convert to platform remove callback returning void PCI: mediatek: Convert to platform remove callback returning void PCI: iproc: Convert to platform remove callback returning void PCI: hisi-error: Convert to platform remove callback returning void PCI: dwc: Convert to platform remove callback returning void PCI: j721e: Convert to platform remove callback returning void PCI: brcmstb: Convert to platform remove callback returning void PCI: altera-msi: Convert to platform remove callback returning void PCI: altera: Convert to platform remove callback returning void PCI: aardvark: Convert to platform remove callback returning void PCI: rcar: Use correct product family name for Renesas R-Car PCI: layerscape: Add the endpoint linkup notifier support PCI: endpoint: pci-epf-vntb: Fix typo in comments ...
2023-06-26Merge branch 'pci/virtualization'Bjorn Helgaas
- Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM hang when guest is rebooted (Mike Pastore) - Add function 1 DMA alias quirk for Marvell 88SE9235 (Robin Murphy) * pci/virtualization: PCI: Add function 1 DMA alias quirk for Marvell 88SE9235 PCI: Delay after FLR of Solidigm P44 Pro NVMe
2023-06-26Merge branch 'pci/enumeration'Bjorn Helgaas
- Add PCI_EXT_CAP_ID_PL_32GT define (Ben Dooks) - Propagate firmware node by calling device_set_node() for better modularity (Andy Shevchenko) - Discover Data Link Layer Link Active Reporting earlier so quirks can take advantage of it (Maciej W. Rozycki) - Use cached Data Link Layer Link Active Reporting capability in pciehp, powerpc/eeh, and mlx5 (Maciej W. Rozycki) - Run quirk for devices that require OS to clear Retrain Link earlier, so later quirks can rely on it (Maciej W. Rozycki) - Export pcie_retrain_link() for use outside ASPM (Maciej W. Rozycki) - Add Data Link Layer Link Active Reporting as another way for pcie_retrain_link() to determine the link is up (Maciej W. Rozycki) - Work around link training failures (especially on the ASMedia ASM2824 switch) by training first at 2.5GT/s and then attempting higher rates (Maciej W. Rozycki) * pci/enumeration: PCI: Add failed link recovery for device reset events PCI: Work around PCIe link training failures PCI: Use pcie_wait_for_link_status() in pcie_wait_for_link_delay() PCI: Add support for polling DLLLA to pcie_retrain_link() PCI: Export pcie_retrain_link() for use outside ASPM PCI: Export PCIe link retrain timeout PCI: Execute quirk_enable_clear_retrain_link() earlier PCI/ASPM: Factor out waiting for link training to complete PCI/ASPM: Avoid unnecessary pcie_link_state use PCI/ASPM: Use distinct local vars in pcie_retrain_link() net/mlx5: Rely on dev->link_active_reporting powerpc/eeh: Rely on dev->link_active_reporting PCI: pciehp: Rely on dev->link_active_reporting PCI: Initialize dev->link_active_reporting earlier PCI: of: Propagate firmware node by calling device_set_node() PCI: Add PCI_EXT_CAP_ID_PL_32GT define # Conflicts: # drivers/pci/pcie/aspm.c
2023-06-20PCI: Work around PCIe link training failuresMaciej W. Rozycki
Attempt to handle cases such as with a downstream port of the ASMedia ASM2824 PCIe switch where link training never completes and the link continues switching between speeds indefinitely with the data link layer never reaching the active state. It has been observed with a downstream port of the ASMedia ASM2824 Gen 3 switch wired to the upstream port of the Pericom PI7C9X2G304 Gen 2 switch, using a Delock Riser Card PCI Express x1 > 2 x PCIe x1 device, P/N 41433, wired to a SiFive HiFive Unmatched board. In this setup the switches should negotiate a link speed of 5.0GT/s, falling back to 2.5GT/s if necessary. Instead the link continues oscillating between the two speeds, at the rate of 34-35 times per second, with link training reported repeatedly active ~84% of the time. Limiting the target link speed to 2.5GT/s with the upstream ASM2824 device makes the two switches communicate correctly. Removing the speed restriction afterwards makes the two devices switch to 5.0GT/s then. Make use of these observations and detect the inability to train the link by checking for the Data Link Layer Link Active status bit being off while the Link Bandwidth Management Status indicating that hardware has changed the link speed or width in an attempt to correct unreliable link operation. Restrict the speed to 2.5GT/s then with the Target Link Speed field, request a retrain and wait 200ms for the data link to go up. If this is successful, lift the restriction, letting the devices negotiate a higher speed. Also check for a 2.5GT/s speed restriction the firmware may have already arranged and lift it too with ports of devices known to continue working afterwards (currently only ASM2824), that already report their data link being up. [bhelgaas: reorder and squash stubs from https://lore.kernel.org/r/alpine.DEB.2.21.2306111619570.64925@angie.orcam.me.uk to avoid adding stubs that do nothing] Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203022037020.56670@angie.orcam.me.uk/ Link: https://source.denx.de/u-boot/u-boot/-/commit/a398a51ccc68 Link: https://lore.kernel.org/r/alpine.DEB.2.21.2305310038540.59226@angie.orcam.me.uk Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-06-20PCI: Execute quirk_enable_clear_retrain_link() earlierMaciej W. Rozycki
Make quirk_enable_clear_retrain_link() an early quirk so that any later fixups can rely on dev->clear_retrain_link to have been already initialised. [bhelgaas: reorder to just before it becomes possible to call pcie_retrain_link() earlier] Link: https://lore.kernel.org/r/alpine.DEB.2.21.2305310049000.59226@angie.orcam.me.uk Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-06-08PCI: Add function 1 DMA alias quirk for Marvell 88SE9235Robin Murphy
Marvell's own product brief implies the 92xx series are a closely related family, and sure enough it turns out that 9235 seems to need the same quirk as the other three, although possibly only when certain ports are used. Link: https://lore.kernel.org/linux-iommu/2a699a99-545c-1324-e052-7d2f41fed1ae@yahoo.co.uk/ Link: https://lore.kernel.org/r/731507e05d70239aec96fcbfab6e65d8ce00edd2.1686157165.git.robin.murphy@arm.com Reported-by: Jason Adriaanse <jason_a69@yahoo.co.uk> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org
2023-05-11PCI/DPC: Quirk PIO log size for Intel Ice Lake Root PortsMika Westerberg
Commit 5459c0b70467 ("PCI/DPC: Quirk PIO log size for certain Intel Root Ports") added quirks for Tiger and Alder Lake Root Ports but missed that the same issue exists also in the previous generation, Ice Lake. Apply the quirk for Ice Lake Root Ports as well. This prevents kernel complaints like: DPC: RP PIO log size 0 is invalid and also enables the DPC driver to dump the RP PIO Log registers when DPC is triggered. [bhelgaas: add dmesg warning and RP PIO Log dump info] Closes: https://bugzilla.kernel.org/show_bug.cgi?id=209943 Link: https://lore.kernel.org/r/20230511121905.73949-1-mika.westerberg@linux.intel.com Reported-by: Mark Blakeney <mark.blakeney@bullet-systems.net> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-05-09PCI: Delay after FLR of Solidigm P44 Pro NVMeMike Pastore
Prevent KVM hang when a Solidgm P44 Pro NVMe is passed through to a guest via IOMMU and the guest is subsequently rebooted. A similar issue was identified and patched by 51ba09452d11 ("PCI: Delay after FLR of Intel DC P3700 NVMe") and the same fix can be applied for this case. (Intel spun off their NAND and SSD business as Solidigm and sold it to SK Hynix in late 2021.) Link: https://lore.kernel.org/r/20230507073519.9737-1-mike@oobak.org Signed-off-by: Mike Pastore <mike@oobak.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-04-17PCI/PM: Extend D3hot delay for NVIDIA HDA controllersAlex Williamson
Assignment of NVIDIA Ampere-based GPUs have seen a regression since the below referenced commit, where the reduced D3hot transition delay appears to introduce a small window where a D3hot->D0 transition followed by a bus reset can wedge the device. The entire device is subsequently unavailable, returning -1 on config space read and is unrecoverable without a host reset. This has been observed with RTX A2000 and A5000 GPU and audio functions assigned to a Windows VM, where shutdown of the VM places the devices in D3hot prior to vfio-pci performing a bus reset when userspace releases the devices. The issue has roughly a 2-3% chance of occurring per shutdown. Restoring the HDA controller d3hot_delay to the effective value before the below commit has been shown to resolve the issue. NVIDIA confirms this change should be safe for all of their HDA controllers. Fixes: 3e347969a577 ("PCI/PM: Reduce D3hot delay with usleep_range()") Link: https://lore.kernel.org/r/20230413194042.605768-1-alex.williamson@redhat.com Reported-by: Zhiyi Guo <zhguo@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Tarun Gupta <targupta@nvidia.com> Cc: Abhishek Sahu <abhsahu@nvidia.com> Cc: Tarun Gupta <targupta@nvidia.com>
2023-02-25Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: - device feature provisioning in ifcvf, mlx5 - new SolidNET driver - support for zoned block device in virtio blk - numa support in virtio pmem - VIRTIO_F_RING_RESET support in vhost-net - more debugfs entries in mlx5 - resume support in vdpa - completion batching in virtio blk - cleanup of dma api use in vdpa - now simulating more features in vdpa-sim - documentation, features, fixes all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits) vdpa/mlx5: support device features provisioning vdpa/mlx5: make MTU/STATUS presence conditional on feature bits vdpa: validate device feature provisioning against supported class vdpa: validate provisioned device features against specified attribute vdpa: conditionally read STATUS in config space vdpa: fix improper error message when adding vdpa dev vdpa/mlx5: Initialize CVQ iotlb spinlock vdpa/mlx5: Don't clear mr struct on destroy MR vdpa/mlx5: Directly assign memory key tools/virtio: enable to build with retpoline vringh: fix a typo in comments for vringh_kiov vhost-vdpa: print warning when vhost_vdpa_alloc_domain fails scsi: virtio_scsi: fix handling of kmalloc failure vdpa: Fix a couple of spelling mistakes in some messages vhost-net: support VIRTIO_F_RING_RESET vhost-scsi: convert sysfs snprintf and sprintf to sysfs_emit vdpa: mlx5: support per virtqueue dma device vdpa: set dma mask for vDPA device virtio-vdpa: support per vq dma device vdpa: introduce get_vq_dma_device() ...
2023-02-20PCI: Avoid FLR for SolidRun SNET DPU rev 1Alvaro Karsz
This patch fixes a FLR bug on the SNET DPU rev 1 by setting the PCI_DEV_FLAGS_NO_FLR_RESET flag. As there is a quirk to avoid FLR (quirk_no_flr), I added a new quirk to check the rev ID before calling to quirk_no_flr. Without this patch, a SNET DPU rev 1 may hang when FLR is applied. Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Message-Id: <20230110165638.123745-3-alvaro.karsz@solid-run.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-02-13PCI: Add ACS quirk for Wangxun NICsMengyuan Lou
Wangxun has verified there is no peer-to-peer between functions for the below selection of SFxxx, RP1000 and RP2000 NICS. They may be multi-function devices, but the hardware does not advertise ACS capability. Add an ACS quirk for these devices so the functions can be in independent IOMMU groups. Link: https://lore.kernel.org/r/20230207102419.44326-1-mengyuanlou@net-swift.com Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-01-30PCI: Avoid FLR for AMD FCH AHCI adaptersDamien Le Moal
PCI passthrough to VMs does not work with AMD FCH AHCI adapters: the guest OS fails to correctly probe devices attached to the controller due to FIS communication failures: ata4: softreset failed (1st FIS failed) ... ata4.00: qc timeout after 5000 msecs (cmd 0xec) ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4) Forcing the "bus" reset method before unbinding & binding the adapter to the vfio-pci driver solves this issue, e.g.: echo "bus" > /sys/bus/pci/devices/<ID>/reset_method gives a working guest OS, indicating that the default FLR reset method doesn't work correctly. Apply quirk_no_flr() to AMD FCH AHCI devices to work around this issue. Link: https://lore.kernel.org/r/20230128013951.523247-1-damien.lemoal@opensource.wdc.com Reported-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2022-09-27PCI/DPC: Quirk PIO log size for certain Intel Root PortsMika Westerberg
Some Root Ports on Intel Tiger Lake and Alder Lake systems support the RP Extensions for DPC and the RP PIO Log registers but incorrectly advertise an RP PIO Log Size of zero. This means the kernel complains that: DPC: RP PIO log size 0 is invalid and if DPC is triggered, the DPC driver will not dump the RP PIO Log registers when it should. This is caused by a BIOS bug and should be fixed the BIOS for future CPUs. Add a quirk to set the correct RP PIO Log size for the affected Root Ports. Link: https://bugzilla.kernel.org/show_bug.cgi?id=209943 Link: https://lore.kernel.org/r/20220816102042.69125-1-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2022-08-04Merge branch 'pci/header-cleanup-immutable'Bjorn Helgaas
- Remove pci_get_legacy_ide_irq(); use ATA_PRIMARY_IRQ() and ATA_SECONDARY_IRQ() instead (Stafford Horne) - Remove isa_dma_bridge_buggy, except for x86_32, the only place it's used (Stafford Horne) - Define ARCH_GENERIC_PCI_MMAP_RESOURCE for csky (Stafford Horne) - Move common PCI definitions that arches sometimes override to asm-generic/pci.h (Stafford Horne) - Include <linux/isa-dma.h> for 'isa_dma_bridge_buggy' when needed (bisection hole here) (Randy Dunlap) * pci/header-cleanup-immutable: PCI: Stub __pci_ioport_map() for arches that don't support it at all x86/cyrix: include header linux/isa-dma.h asm-generic: Add new pci.h and use it csky: PCI: Define ARCH_GENERIC_PCI_MMAP_RESOURCE PCI: Move isa_dma_bridge_buggy out of asm/dma.h PCI: Remove pci_get_legacy_ide_irq() and asm-generic/pci.h
2022-08-04Merge branch 'pci/ctrl/tegra194'Bjorn Helgaas
- Fix tegra_pcie_config_ep() power management in error path (Miaoqian Lin) - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Disable MSI for Tegra234 Root Ports so they use INTx for all events (PCIe doesn't allow mixing INTx and MSI/MSI-X) (Vidya Sagar) - Search for Vendor-Specific RAS-DEC capability instead of hard-coding offset (Vidya Sagar) - Fix unintentional APPL_INTR_STATUS_L0 value overwrite in Root Port interrupt handling (Vidya Sagar) - Clear Bandwidth Management interrupt status bit to avoid interrupt storm (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix offset when clearing bit in Data Link Feature capability (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) * pci/ctrl/tegra194: PCI: tegra194: Add Tegra234 PCIe support PCI: tegra194: Extend Endpoint mode support PCI: tegra194: Fix link up retry sequence PCI: tegra194: Clean up the exit path for Endpoint mode PCI: tegra194: Enable support for 256 Byte payload PCI: tegra194: Clear bandwidth management status PCI: tegra194: Fix Root Port interrupt handling PCI: tegra194: Find RAS DES PCIe capability offset Revert "PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie" PCI: Disable MSI for Tegra234 Root Ports dt-bindings: PCI: tegra234: Add schema for tegra234 Endpoint mode dt-bindings: PCI: tegra234: Add schema for tegra234 Root Port mode dt-bindings: PCI: tegra194: Convert to json-schema PCI: tegra194: Fix PM error handling in tegra_pcie_config_ep() # Conflicts: # drivers/pci/controller/dwc/pcie-designware.h # drivers/pci/controller/dwc/pcie-tegra194.c
2022-07-22PCI: Move isa_dma_bridge_buggy out of asm/dma.hStafford Horne
The isa_dma_bridge_buggy symbol is only used for x86_32, and only x86_32 platforms or quirks ever set it. Add a new linux/isa-dma.h header that #defines isa_dma_bridge_buggy to 0 except on x86_32, where we keep it as a variable, and remove all the arch- specific definitions. [bhelgaas: commit log] Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/r/20220722214944.831438-3-shorne@gmail.com Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2022-07-22PCI: Disable MSI for Tegra234 Root PortsVidya Sagar
Tegra234 PCIe Root Ports don't generate MSI interrupts for PME and AER events. Since PCIe spec (r6.0 sec 6.1.4.3) doesn't support using a mix of INTx and MSI/MSI-X, MSI needs to be disabled to avoid Root Port service drivers registering their respective ISRs with MSI interrupt and to let only INTx be used for all events. Link: https://lore.kernel.org/r/20220721142052.25971-8-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-06-09PCI: Add ACS quirk for Broadcom BCM5750x NICsPavan Chebbi
The Broadcom BCM5750x NICs may be multi-function devices. They do not advertise ACS capability. Peer-to-peer transactions are not possible between the individual functions, so it is safe to treat them as fully isolated. Add an ACS quirk for these devices so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. Link: https://lore.kernel.org/r/1654796507-28610-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit (git 2.34.1) at 2024-05-28 22:57:43 +0000