| Age | Commit message (Collapse) | Author |
|---|
|
Minor re-organisation so that event handlers can access both a pointer
to the bridge area of the PCIe Root Port and the control area of the PCIe
Root Port.
Link: https://lore.kernel.org/r/20230728131401.1615724-5-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Minor code re-organisation so that macros representing registers ascend in
numerical order and use the same names as their hardware documentation.
Removed registers not used by the driver.
Link: https://lore.kernel.org/r/20230728131401.1615724-4-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Enable building driver as a module. The expected use case is the
driver is built as a module, is installed when needed, and cannot be
removed once installed since it is not possible to clean-up
the irq_chip data structures on removal, as described in:
https://lore.kernel.org/linux-pci/87y1wgbah8.wl-maz@kernel.org/
The driver has .suppress_bind_attrs set to true for the same
reasons (ie prevent unbinding, that would leave the kernel
with stale IRQ configuration that cannot be cleaned up).
Link: https://lore.kernel.org/linux-pci/87y1wgbah8.wl-maz@kernel.org/
Link: https://lore.kernel.org/r/20230728131401.1615724-3-daire.mcnamara@microchip.com
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The SEC and DED interrupt bits are laid out the wrong way round so the SEC
interrupt handler attempts to mask, unmask, and clear the DED interrupt
and vice versa. Correct the bit offsets so that each interrupt handler
operates properly.
Link: https://lore.kernel.org/r/20230728131401.1615724-2-daire.mcnamara@microchip.com
Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
|
|
When we have a struct pci_dev *, use pci_dev_id() instead of manually
composing the ID with PCI_DEVID() from dev->bus->number and dev->devfn.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230807134858.116051-4-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
When we have a struct pci_dev *, use pci_dev_id() instead of manually
composing the ID with PCI_DEVID() from dev->bus->number and dev->devfn.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230807134858.116051-3-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
When we have a struct pci_dev *, use pci_dev_id() instead of manually
composing the ID with PCI_DEVID() from dev->bus->number and dev->devfn.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230807134858.116051-2-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
b3574f579ece ("PCI: mvebu: Mark driver as BROKEN") made it impossible to
enable the pci-mvebu driver. The driver does have known problems, but as
Russell and Uwe reported, it does work in some configurations, so removing
it broke some working setups.
Revert b3574f579ece so pci-mvebu is available.
Reported-by: Russell King (Oracle) <linux@armlinux.org.uk>
Link: https://lore.kernel.org/r/ZMzicVQEyHyZzBOc@shell.armlinux.org.uk
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230804134622.pmbymxtzxj2yfhri@pengutronix.de
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
After commit 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte
payload"), we initialize MPS=256 for tegra194 Root Ports before enumerating
the hierarchy.
Consider an Endpoint that supports only MPS=128. In the default situation
(CONFIG_PCIE_BUS_DEFAULT set and no "pci=pcie_bus_*" parameter), Linux
tries to configure the MPS of every device to match the upstream bridge.
If the Endpoint is directly below the Root Port, Linux can reduce the Root
Port MPS to 128 to match the Endpoint. But if there's a switch in the
middle, Linux doesn't reduce the Root Port MPS because other devices below
the switch may already be configured with MPS larger than 128.
This scenario results in uncorrectable Malformed TLP errors if the Root
Port sends TLPs with payloads larger than 128 bytes. These errors can
be avoided by using the "pci=pcie_bus_safe" parameter, but it doesn't
seem to be a good idea to always have this parameter even for basic
functionality to work.
Revert commit 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte
payload") so the Root Ports default to MPS=128, which all devices
support.
If peer-to-peer DMA is not required, one can use "pci=pcie_bus_perf" to
get the benefit of larger MPS settings.
[bhelgaas: commit log; kwilczynski: retain "u16 val_16" declaration at
the top, add missing acked by tag]
Fixes: 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload")
Link: https://lore.kernel.org/linux-pci/20230619102604.3735001-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org # v6.0-rc1+
|
|
Remove the dangerous late initialization of xen-swiotlb in
pci_xen_swiotlb_init_late and instead just always initialize
xen-swiotlb in the boot code if CONFIG_XEN_PCIDEV_FRONTEND is
enabled and Xen PV PCI is possible.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
|
|
The following debug object splat was observed in testing:
ODEBUG: free active (active state 0) object: 0000000097d23782 object type: work_struct hint: doe_statemachine_work+0x0/0x510
WARNING: CPU: 1 PID: 71 at lib/debugobjects.c:514 debug_print_object+0x7d/0xb0
...
Workqueue: pci 0000:36:00.0 DOE [1 doe_statemachine_work
RIP: 0010:debug_print_object+0x7d/0xb0
...
Call Trace:
? debug_print_object+0x7d/0xb0
? __pfx_doe_statemachine_work+0x10/0x10
debug_object_free.part.0+0x11b/0x150
doe_statemachine_work+0x45e/0x510
process_one_work+0x1d4/0x3c0
This occurs because destroy_work_on_stack() was called after signaling
the completion in the calling thread. This creates a race between
destroy_work_on_stack() and the task->work struct going out of scope in
pci_doe().
Signal the work complete after destroying the work struct. This is safe
because signal_task_complete() is the final thing the work item does and
the workqueue code is careful not to access the work struct after.
Fixes: abf04be0e707 ("PCI/DOE: Fix memory leak with CONFIG_DEBUG_OBJECTS=y")
Link: https://lore.kernel.org/r/20230726-doe-fix-v1-1-af07e614d4dd@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
|
|
This reverts commit da56a1bfbab55189595e588f1d984bdfb5cf5924.
Bjorn Andersson, Fabio Estevam, Xiaolei Wang, and Jon Hunter reported that
da56a1bfbab5 ("PCI: dwc: Wait for link up only if link is started") broke
controller probing by returning an error in case the link does not come up
during host initialisation, for example when the slot is empty.
As explained in commit 886a9c134755 ("PCI: dwc: Move link handling into
common code") and as indicated by the comment "Ignore errors, the link may
come up later" in the code, waiting for link up and ignoring errors is the
intended behaviour:
Let's standardize this to succeed as there are usecases where devices
(and the link) appear later even without hotplug. For example, a
reconfigured FPGA device.
Reverting the offending commit specifically fixes a regression on Qualcomm
platforms like the Lenovo ThinkPad X13s which no longer reach the
interconnect sync state if a slot does not have a device populated (e.g. an
optional modem).
Note that enabling asynchronous probing by default as was done for Qualcomm
platforms by commit c0e1eb441b1d ("PCI: qcom: Enable async probe by
default"), should take care of any related boot time concerns.
Finally, note that the intel-gw driver is the only driver currently not
providing a .start_link() callback and instead starts the link in its
.host_init() callback, which may avoid an additional one-second timeout
during probe by making the link-up wait conditional. If anyone cares, that
can be done in a follow-up patch with a proper motivation.
[bhelgaas: add Fabio Estevam, Xiaolei Wang, Jon Hunter reports]
Fixes: da56a1bfbab5 ("PCI: dwc: Wait for link up only if link is started")
Link: https://lore.kernel.org/r/20230706082610.26584-1-johan+linaro@kernel.org
Reported-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reported-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230704122635.1362156-1-festevam@gmail.com/
Reported-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20230705010624.3912934-1-xiaolei.wang@windriver.com/
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/6ca287a1-6c7c-7b90-9022-9e73fb82b564@nvidia.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Sajid Dalvi <sdalvi@google.com>
Cc: Ajay Agarwal <ajayagarwal@google.com>
|
|
If legacy I/O spaces are not supported simply return an error when
trying to access them via pci_resource_io(). This allows inb() and
friends to become undefined when they are known at compile time to be
non-functional in a later patch.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Link: https://lore.kernel.org/r/20230703135255.2202721-3-schnelle@linux.ibm.com
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
In the future inw() and friends will not be compiled on architectures
without I/O port support.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Link: https://lore.kernel.org/r/20230703135255.2202721-2-schnelle@linux.ibm.com
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Don't populate the arrays on the stack; instead make them static const.
Link: https://lore.kernel.org/r/20230627125612.724764-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus. As
part of that merge prepping Arm DT support 13 years ago, they "temporarily"
include each other. They also include platform_device.h and of.h. As a
result, there's a pretty much random mix of those include files used
throughout the tree. In order to detangle these headers and replace the
implicit includes with struct declarations, users need to explicitly
include the correct includes.
Link: https://lore.kernel.org/r/20230714174827.4061572-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
A 32-bit mask was used on the 64-bit PCI address used for mapping MSIs.
This would result in the upper 32 bits being unintentionally zeroed and
MSIs getting mapped to incorrect PCI addresses if the address had any
of the upper bits set.
Replace 32-bit mask by appropriate 64-bit mask.
[kwilczynski: use GENMASK_ULL() over GENMASK() for 32-bit compatibility]
Fixes: dc73ed0f1b8b ("PCI: rockchip: Fix window mapping and address translation for endpoint")
Closes: https://lore.kernel.org/linux-pci/8d19e5b7-8fa0-44a4-90e2-9bb06f5eb694@moroto.mountain
Link: https://lore.kernel.org/linux-pci/20230703085845.2052008-1-rick.wertenbroek@gmail.com
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
|
|
Rather than casting void(*)(struct clk *) to void (*)(void *), that
forces conversion to an incompatible function type, replace the cast
with a small local stub function with a signature that matches what
the devm_add_action_or_reset() function expects.
The sub function takes a void *, then passes it directly to
clk_disable_unprepare(), which handles the more specific type.
Reported by clang when building with warnings enabled:
drivers/pci/controller/pcie-microchip-host.c:866:32: warning: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Wcast-function-type-strict]
devm_add_action_or_reset(dev, (void (*) (void *))clk_disable_unprepare,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
No functional changes are intended.
Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Link: https://lore.kernel.org/linux-pci/20230629165956.237832-3-kwilczynski@kernel.org
Link: https://lore.kernel.org/linux-pci/20230511-pci-microchip-clk-cast-v1-1-7674f4d4e218@kernel.org
Link: https://lore.kernel.org/linux-pci/20230111125323.1911373-3-daire.mcnamara@microchip.com
Co-developed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Co-developed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Rather than casting void(*)(struct clk *) to void (*)(void *), that
forces conversion to an incompatible function type, replace the cast
with a small local stub function with a signature that matches what
the devm_add_action_or_reset() function expects.
The sub function takes a void *, then passes it directly to
clk_disable_unprepare(), which handles the more specific type.
Reported by clang when building with warnings enabled:
drivers/pci/controller/dwc/pcie-keembay.c:172:12: warning: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Wcast-function-type-strict]
(void(*)(void *))clk_disable_unprepare,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
No functional changes are intended.
Fixes: 0c87f90b4c13 ("PCI: keembay: Add support for Intel Keem Bay")
Link: https://lore.kernel.org/linux-pci/20230629165956.237832-2-kwilczynski@kernel.org
Acked-by: Srikanth Thokala <srikanth.thokala@intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Rather than casting void(*)(struct clk *) to void (*)(void *), that
forces conversion to an incompatible function type, replace the cast
with a small local stub function with a signature that matches what
the devm_add_action_or_reset() function expects.
The sub function takes a void *, then passes it directly to
clk_disable_unprepare(), which handles the more specific type.
Reported by clang when building with warnings enabled:
drivers/pci/controller/dwc/pci-meson.c:191:6: warning: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Wcast-function-type-strict]
(void (*) (void *))clk_disable_unprepare,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
No functional changes are intended.
Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Link: https://lore.kernel.org/linux-pci/20230629165956.237832-1-kwilczynski@kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Convert calls to platform_get_resource() and devm_ioremap_resource()
into a single call to devm_platform_get_and_ioremap_resource(), to
simplify the code.
This new helper added in commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()") does what both of the
other separate functions do.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230323074553.90372-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
|
|
Convert calls to platform_get_resource() and devm_ioremap_resource()
into a single call to devm_platform_get_and_ioremap_resource(), to
simplify the code.
This new helper added in commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()") does what both of the
other separate functions do.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230323090011.66754-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Convert calls to platform_get_resource() and devm_ioremap_resource()
into a single call to devm_platform_get_and_ioremap_resource(), to
simplify the code.
This new helper added in commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()") does what both of the
other separate functions do.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230323090431.73526-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Convert calls to platform_get_resource() and devm_ioremap_resource()
into a single call to devm_platform_get_and_ioremap_resource(), to
simplify the code.
This new helper added in commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()") does what both of the
other separate functions do.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230323091644.91981-1-yang.lee@linux.alibaba.com
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Currently, as part of the qcom_pcie_perst_deassert() function, instead
of writing the updated value to clear PARF_MSTR_AXI_CLK_EN, the variable
"val" is re-read.
This must be fixed to ensure that the master clock supplied to the MHI
bus is correctly gated during L1.1/L1.2 to save power.
Thus, replace the line that re-reads "val" with a line that writes the
updated value to the register to clear PARF_MSTR_AXI_CLK_EN.
[kwilczynski: commit log]
Fixes: c457ac029e44 ("PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS")
Link: https://lore.kernel.org/linux-pci/20230627141036.11600-1-manivannan.sadhasivam@linaro.org
Reported-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Replace low-level property access functions like of_get_property() and
of_find_property() with their typed equivalents (i.e., of_property_read_<type>
functions), as it's preferred to use typed property access functions for
reading properties.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230609193326.1963542-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
|
|
The apple_pcie_setup_port() function computes ilog2(pcie->nvecs) to set
up the number of MSIs available for each port. However, it's called
before apple_msi_init(), which initializes pcie->nvecs.
Luckily, pcie->nvecs is part of kzalloc()-ed structure and, as such,
initialized as zero. ilog2(0) happens to be 0xffffffff which then simply
configures more MSIs in hardware than we have. This doesn't break
anything because we never hand out those vectors.
Thus, swap the order of the two calls so that the correctly initialized
value is then used.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20230311133453.63246-1-sven@svenpeter.dev
Fixes: 476c41ed4597 ("PCI: apple: Implement MSI support")
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
|
|
pci_enable_pcie_error_reporting() is used only inside aer.c. Stop exposing
it outside the file.
Link: https://lore.kernel.org/r/20230710232136.233034-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
|
|
pci_disable_pcie_error_reporting() has no callers. Remove it.
Link: https://lore.kernel.org/r/20230710232136.233034-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
|
|
Pull NTB updates from Jon Mason:
"Fixes for pci_clean_master, error handling in driver inits, and
various other issues/bugs"
* tag 'ntb-6.5' of https://github.com/jonmason/ntb:
ntb: hw: amd: Fix debugfs_create_dir error checking
ntb.rst: Fix copy and paste error
ntb_netdev: Fix module_init problem
ntb: intel: Remove redundant pci_clear_master
ntb: epf: Remove redundant pci_clear_master
ntb_hw_amd: Remove redundant pci_clear_master
ntb: idt: drop redundant pci_enable_pcie_error_reporting()
MAINTAINERS: git://github -> https://github.com for jonmason
NTB: EPF: fix possible memory leak in pci_vntb_probe()
NTB: ntb_tool: Add check for devm_kcalloc
NTB: ntb_transport: fix possible memory leak while device_register() fails
ntb: intel: Fix error handling in intel_ntb_pci_driver_init()
NTB: amd: Fix error handling in amd_ntb_pci_driver_init()
ntb: idt: Fix error handling in idt_pci_driver_init()
|
|
As ntb_register_device() don't handle error of device_register(),
if ntb_register_device() returns error in pci_vntb_probe(), name of kobject
which is allocated in dev_set_name() called in device_add() is leaked.
As comment of device_add() says, it should call put_device() to drop the
reference count that was set in device_initialize()
when it fails, so the name can be freed in kobject_cleanup().
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- TI J721S2 CSI BCDMA support
Updates:
- Native HDMI support for dw edma driver
- ste dma40 updates for supporting proper SRAM handle in DT
- removal of dma device chancnt setting in drivers"
* tag 'dmaengine-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (28 commits)
dmaengine: sprd: Don't set chancnt
dmaengine: hidma: Don't set chancnt
dmaengine: plx_dma: Don't set chancnt
dmaengine: axi-dmac: Don't set chancnt
dmaengine: dw-axi-dmac: Don't set chancnt
dmaengine: qcom: bam_dma: allow omitting num-{channels,ees}
dmaengine: dw-edma: Add HDMA DebugFS support
dmaengine: dw-edma: Add support for native HDMA
dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation
dmaengine: dw-edma: Rename dw_edma_core_ops structure to dw_edma_plat_ops
dmaengine: ste_dma40: use proper format string for resource_size_t
dmaengine: make QCOM_HIDMA depend on HAS_IOMEM
dmaengine: ste_dma40: fix typo in enum documentation
dmaengine: ste_dma40: use correct print specfier for resource_size_t
MAINTAINERS: Add myself as the DW eDMA driver reviewer
MAINTAINERS: Add Manivannan to DW eDMA driver maintainers list
MAINTAINERS: Demote Gustavo Pimentel to DW EDMA driver reviewer
dmaengine: ti: k3-udma: Add support for J721S2 CSI BCDMA instance
dt-bindings: dma: ti: Add J721S2 BCDMA
dmaengine: ti: k3-psil-j721s2: Add PSI-L thread map for main CPSW2G
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Export pcie_retrain_link() for use outside ASPM
- Add Data Link Layer Link Active Reporting as another way for
pcie_retrain_link() to determine the link is up
- Work around link training failures (especially on the ASMedia
ASM2824 switch) by training first at 2.5GT/s and then attempting
higher rates
Resource management:
- When we coalesce host bridge windows, remove invalidated resources
from the resource tree so future allocations work correctly
Hotplug:
- Cancel bringup sequence if card is not present, to keep from
blinking Power Indicator indefinitely
- Reassign bridge resources if necessary for ACPI hotplug
Driver binding:
- Convert platform_device .remove() callbacks to return void instead
of a mostly useless int
Power management:
- Reduce wait time for secondary bus to be ready to speed up resume
- Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
D3cold
- Call _REG when transitioning D-states so AML that uses the PCI
config space OpRegion works, which fixes some ASMedia GPIO
controllers after resume
Virtualization:
- Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
hang when guest is rebooted
- Add function 1 DMA alias quirk for Marvell 88SE9235
Error handling:
- Unexport pci_save_aer_state() since it's only used in drivers/pci/
- Drop recommendation for drivers to configure AER Capability, since
the PCI core does this for all devices
ASPM:
- Disable ASPM on MFD function removal to avoid use-after-free
- Tighten up pci_enable_link_state() and pci_disable_link_state()
interfaces so they don't enable/disable states the driver didn't
specify
- Avoid link retraining race that can happen if ASPM sets link
control parameters while the link is in the midst of training for
some other reason
Endpoint framework:
- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
different from "PCI Endpoint NTB driver"
- Automatically create a function specific attributes group for
endpoint drivers to avoid reference counting issues
- Fix many EPC test issues
- Return pci_epf_type_add_cfs() error if EPF has no driver
- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
MSI vector parameters
- Pass EPF device ID to driver probe functions
- Return -EALREADY if EPC has already been started/stopped
- Add linkdown notifier support and use it in qcom-ep
- Add Bus Master Enable event support and use it in qcom-ep
- Add Qualcomm Modem Host Interface (MHI) endpoint driver
- Add Layerscape PME interrupt handling to manage link-up
notification
Cadence PCIe controller driver:
- Wait for link retrain to complete when working around the J721E
i2085 erratum with Gen2 mode
Faraday FTPC100 PCI controller driver:
- Release clock resources on error paths
Freescale i.MX6 PCIe controller driver:
- Save and restore Root Port MSI control to work around hardware defect
Intel VMD host bridge driver:
- Reset VMD config register between soft reboots
- Capture pci_reset_bus() return value instead of printing junk when
it fails
Qualcomm PCIe controller driver:
- Add SDX65 endpoint compatible string to DT binding
- Disable register write access after init for IP v2.3.3, v2.9.0
- Use DWC helpers for enabling/disabling writes to DBI registers
- Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
v2.3.3, v2.7.0, v2.9.0
- Reuse v2.3.2 post-init sequence for v2.4.0
Renesas R-Car PCIe controller driver:
- Remove unused static pcie_base and pcie_dev
Rockchip PCIe controller driver:
- Remove writes to unused registers
- Write endpoint Device ID using correct register
- Assert PCI Configuration Enable bit after probe so endpoint
responds instead of generating Request Retry Status messages
- Poll waiting for PHY PLLs to lock
- Update RK3399 example DT binding to be valid
- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message
- Use multiple windows to avoid address translation conflicts
- Use u32 (not u16) when accessing 32-bit registers
- Hide MSI-X Capability, since RK3399 can't generate MSI-X
- Set endpoint controller required alignment to 256
Synopsys DesignWare PCIe controller driver:
- Wait for link to come up only if we've initiated link training
Miscellaneous:
- Add pci_clear_master() stub for non-CONFIG_PCI"
* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
Documentation: PCI: correct spelling
PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
PCI: xgene-msi: Convert to platform remove callback returning void
PCI: tegra: Convert to platform remove callback returning void
PCI: rockchip-host: Convert to platform remove callback returning void
PCI: mvebu: Convert to platform remove callback returning void
PCI: mt7621: Convert to platform remove callback returning void
PCI: mediatek-gen3: Convert to platform remove callback returning void
PCI: mediatek: Convert to platform remove callback returning void
PCI: iproc: Convert to platform remove callback returning void
PCI: hisi-error: Convert to platform remove callback returning void
PCI: dwc: Convert to platform remove callback returning void
PCI: j721e: Convert to platform remove callback returning void
PCI: brcmstb: Convert to platform remove callback returning void
PCI: altera-msi: Convert to platform remove callback returning void
PCI: altera: Convert to platform remove callback returning void
PCI: aardvark: Convert to platform remove callback returning void
PCI: rcar: Use correct product family name for Renesas R-Car
PCI: layerscape: Add the endpoint linkup notifier support
PCI: endpoint: pci-epf-vntb: Fix typo in comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
|
|
- Convert platform_device .remove() callbacks to return void instead of a
mostly useless int (Uwe Kleine-König)
* pci/controller/remove-void-callbacks:
PCI: xgene-msi: Convert to platform remove callback returning void
PCI: tegra: Convert to platform remove callback returning void
PCI: rockchip-host: Convert to platform remove callback returning void
PCI: mvebu: Convert to platform remove callback returning void
PCI: mt7621: Convert to platform remove callback returning void
PCI: mediatek-gen3: Convert to platform remove callback returning void
PCI: mediatek: Convert to platform remove callback returning void
PCI: iproc: Convert to platform remove callback returning void
PCI: hisi-error: Convert to platform remove callback returning void
PCI: dwc: Convert to platform remove callback returning void
PCI: j721e: Convert to platform remove callback returning void
PCI: brcmstb: Convert to platform remove callback returning void
PCI: altera-msi: Convert to platform remove callback returning void
PCI: altera: Convert to platform remove callback returning void
PCI: aardvark: Convert to platform remove callback returning void
|
|
- Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be different
from "PCI Endpoint NTB driver" (Shunsuke Mie)
- Automatically create a function specific attributes group for endpoint
drivers to avoid reference counting issues (Damien Le Moal)
- Move and unexport pci_epf_type_add_cfs() (Damien Le Moal)
- Reinitialize EPF test DMA transfer completion before submitting it to
avoid losing the completion notification (Damien Le Moal)
- Fix EPF test DMA transfer completion detection (Damien Le Moal)
- Submit EPF test DMA transfers with dmaengine_submit(), not tx_submit()
(Damien Le Moal)
- Simplify EPF test read/write/copy functions (Damien Le Moal)
- Simplify EPF test "raise IRQ" interface (Damien Le Moal)
- Simplify EPF test IRQ command execution (Damien Le Moal)
- Improve EPF test command/status register handling (Damien Le Moal)
- Free IRQs before removing device (Damien Le Moal)
- Reinitialize IRQ completions for every test (Damien Le Moal)
- Don't write status in IRQ handler to avoid race (Damien Le Moal)
- Fix dma_chan direction in data transfer test (Yoshihiro Shimoda)
- Return pci_epf_type_add_cfs() error if EPF has no driver (Damien Le Moal)
- Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq() MSI
vector parameters (Manivannan Sadhasivam)
- Pass EPF device ID to driver probe functions (Manivannan Sadhasivam)
- Return -EALREADY if EPC has already been started/stopped (Manivannan
Sadhasivam)
- Add linkdown notifier support and use it in qcom-ep (Manivannan
Sadhasivam)
- Add Bus Master Enable event support and use it in qcom-ep (Manivannan
Sadhasivam)
- Add Qualcomm Modem Host Interface (MHI) endpoint driver (Manivannan
Sadhasivam)
- Add Layerscape PME interrupt handling to manage link-up notification
(Frank Li)
* pci/controller/endpoint:
PCI: layerscape: Add the endpoint linkup notifier support
PCI: endpoint: pci-epf-vntb: Fix typo in comments
MAINTAINERS: Add PCI MHI endpoint function driver under MHI bus
PCI: endpoint: Add PCI Endpoint function driver for MHI bus
PCI: qcom-ep: Add support for BME notification
PCI: qcom-ep: Add support for Link down notification
PCI: endpoint: Add BME notifier support
PCI: endpoint: Add linkdown notifier support
PCI: endpoint: Return error if EPC is started/stopped multiple times
PCI: endpoint: Pass EPF device ID to the probe function
PCI: endpoint: Add missing documentation about the MSI/MSI-X range
PCI: endpoint: Improve pci_epf_type_add_cfs()
PCI: endpoint: functions/pci-epf-test: Fix dma_chan direction
misc: pci_endpoint_test: Simplify pci_endpoint_test_msi_irq()
misc: pci_endpoint_test: Do not write status in IRQ handler
misc: pci_endpoint_test: Re-init completion for every test
misc: pci_endpoint_test: Free IRQs before removing the device
PCI: epf-test: Simplify transfers result print
PCI: epf-test: Simplify DMA support checks
PCI: epf-test: Cleanup request result handling
PCI: epf-test: Cleanup pci_epf_test_cmd_handler()
PCI: epf-test: Improve handling of command and status registers
PCI: epf-test: Simplify IRQ test commands execution
PCI: epf-test: Simplify pci_epf_test_raise_irq()
PCI: epf-test: Simplify read/write/copy test functions
PCI: epf-test: Use dmaengine_submit() to initiate DMA transfer
PCI: epf-test: Fix DMA transfer completion detection
PCI: epf-test: Fix DMA transfer completion initialization
PCI: endpoint: Move pci_epf_type_add_cfs() code
PCI: endpoint: Automatically create a function specific attributes group
PCI: endpoint: Fix a Kconfig prompt of vNTB driver
|
|
- Reset VMD config register between soft reboots (Nirmal Patel)
- Capture pci_reset_bus() return value instead of printing junk when it
fails (Xinghui Li)
* pci/controller/vmd:
PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
PCI: vmd: Reset VMD config register between soft reboots
|
|
- Remove writes to unused registers (Rick Wertenbroek)
- Write endpoint Device ID using correct register (Rick Wertenbroek)
- Assert PCI Configuration Enable bit after probe so endpoint responds
instead of generating Request Retry Status messages (Rick Wertenbroek)
- Poll waiting for PHY PLLs to lock (Rick Wertenbroek)
- Update RK3399 example DT binding to be valid (Rick Wertenbroek)
- Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
manually generating PCIe message (Rick Wertenbroek)
- Use multiple windows to avoid address translation conflicts (Rick
Wertenbroek)
- Use u32 (not u16) when accessing 32-bit registers (Rick Wertenbroek)
- Hide MSI-X Capability, since RK3399 can't generate MSI-X (Rick
Wertenbroek)
- Set endpoint controller required alignment to 256 (Damien Le Moal)
* pci/controller/rockchip:
PCI: rockchip: Set address alignment for endpoint mode
PCI: rockchip: Don't advertise MSI-X in PCIe capabilities
PCI: rockchip: Use u32 variable to access 32-bit registers
PCI: rockchip: Fix window mapping and address translation for endpoint
PCI: rockchip: Fix legacy IRQ generation for RK3399 PCIe endpoint core
dt-bindings: PCI: Update the RK3399 example to a valid one
PCI: rockchip: Add poll and timeout to wait for PHY PLLs to be locked
PCI: rockchip: Assert PCI Configuration Enable bit after probe
PCI: rockchip: Write PCI Device ID to correct register
PCI: rockchip: Remove writes to unused registers
|
|
- Remove unused static pcie_base and pcie_dev (Geert Uytterhoeven)
* pci/controller/rcar:
PCI: rcar: Use correct product family name for Renesas R-Car
PCI: rcar-host: Remove unused static pcie_base and pcie_dev
|
|
- Disable register write access after init for IP v2.3.3, v2.9.0
(Manivannan Sadhasivam)
- Use DWC helpers for enabling/disabling writes to DBI registers
(Manivannan Sadhasivam)
- Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
v2.3.3, v2.7.0, v2.9.0 (Manivannan Sadhasivam)
- Reuse v2.3.2 post-init sequence for v2.4.0 (Manivannan Sadhasivam)
-
* pci/controller/qcom:
PCI: qcom: Do not advertise hotplug capability for IP v2.1.0
PCI: qcom: Do not advertise hotplug capability for IP v1.0.0
PCI: qcom: Use post init sequence of IP v2.3.2 for v2.4.0
PCI: qcom: Do not advertise hotplug capability for IP v2.3.2
PCI: qcom: Do not advertise hotplug capability for IPs v2.3.3 and v2.9.0
PCI: qcom: Do not advertise hotplug capability for IPs v2.7.0 and v1.9.0
PCI: qcom: Disable write access to read only registers for IP v2.9.0
PCI: qcom: Use DWC helpers for modifying the read-only DBI registers
PCI: qcom: Disable write access to read only registers for IP v2.3.3
|
|
- Release clock resources on error paths (Junyan Ye)
* pci/pci/ftpci100:
PCI: ftpci100: Release the clock resources
|
|
- Wait for link to come up only if we've initiated link training (Ajay
Agarwal)
- Save and restore imx6 Root Port MSI control to work around hardware
defect (Richard Zhu)
* pci/controller/dwc:
PCI: imx6: Save and restore root port MSI control in suspend and resume
PCI: dwc: Wait for link up only if link is started
|
|
- Wait for link retrain to complete when working around the J721E i2085
erratum with Gen2 mode (Siddharth Vadapalli)
* pci/controller/cadence:
PCI: cadence: Fix Gen2 Link Retraining process
|
|
- Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM hang
when guest is rebooted (Mike Pastore)
- Add function 1 DMA alias quirk for Marvell 88SE9235 (Robin Murphy)
* pci/virtualization:
PCI: Add function 1 DMA alias quirk for Marvell 88SE9235
PCI: Delay after FLR of Solidigm P44 Pro NVMe
|
|
- When we coalesce host bridge windows, remove invalidated resources from
the resource tree so future allocations work correctly (Ross Lagerwall)
* pci/resource:
PCI: Release resource invalidated by coalescing
|
|
- Reduce wait time for secondary bus to be ready to speed up resume (Mika
Westerberg)
- Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in D3cold
(Ondrej Zary)
- Call _REG when transitioning D-states so AML that uses the PCI config
space OpRegion works, which fixes some ASMedia GPIO controllers (Mario
Limonciello)
* pci/pm:
PCI/ACPI: Call _REG when transitioning D-states
PCI/ACPI: Validate acpi_pci_set_power_state() parameter
PCI/PM: Avoid putting EloPOS E2/S2/H2 PCIe Ports in D3cold
PCI/PM: Shorten pci_bridge_wait_for_secondary_bus() wait time for slow links
|
|
- Simplify Attention Button logging (Bjorn Helgaas)
- Cancel bringup sequence if card is not present, to keep from blinking
Power Indicator indefinitely (Rongguang Wei)
- Reassign bridge resources if necessary for ACPI hotplug (Igor Mammedov)
* pci/hotplug:
PCI: acpiphp: Reassign resources on bridge if necessary
PCI: pciehp: Cancel bringup sequence if card is not present
PCI: pciehp: Simplify Attention Button logging
|
|
- Add PCI_EXT_CAP_ID_PL_32GT define (Ben Dooks)
- Propagate firmware node by calling device_set_node() for better
modularity (Andy Shevchenko)
- Discover Data Link Layer Link Active Reporting earlier so quirks can take
advantage of it (Maciej W. Rozycki)
- Use cached Data Link Layer Link Active Reporting capability in pciehp,
powerpc/eeh, and mlx5 (Maciej W. Rozycki)
- Run quirk for devices that require OS to clear Retrain Link earlier, so
later quirks can rely on it (Maciej W. Rozycki)
- Export pcie_retrain_link() for use outside ASPM (Maciej W. Rozycki)
- Add Data Link Layer Link Active Reporting as another way for
pcie_retrain_link() to determine the link is up (Maciej W. Rozycki)
- Work around link training failures (especially on the ASMedia ASM2824
switch) by training first at 2.5GT/s and then attempting higher rates
(Maciej W. Rozycki)
* pci/enumeration:
PCI: Add failed link recovery for device reset events
PCI: Work around PCIe link training failures
PCI: Use pcie_wait_for_link_status() in pcie_wait_for_link_delay()
PCI: Add support for polling DLLLA to pcie_retrain_link()
PCI: Export pcie_retrain_link() for use outside ASPM
PCI: Export PCIe link retrain timeout
PCI: Execute quirk_enable_clear_retrain_link() earlier
PCI/ASPM: Factor out waiting for link training to complete
PCI/ASPM: Avoid unnecessary pcie_link_state use
PCI/ASPM: Use distinct local vars in pcie_retrain_link()
net/mlx5: Rely on dev->link_active_reporting
powerpc/eeh: Rely on dev->link_active_reporting
PCI: pciehp: Rely on dev->link_active_reporting
PCI: Initialize dev->link_active_reporting earlier
PCI: of: Propagate firmware node by calling device_set_node()
PCI: Add PCI_EXT_CAP_ID_PL_32GT define
# Conflicts:
# drivers/pci/pcie/aspm.c
|
|
- Disable ASPM on MFD function removal to avoid use-after-free (Ding Hui)
- Tighten up pci_enable_link_state() and pci_disable_link_state()
interfaces so they don't enable/disable states the driver didn't specify
(Ajay Agarwal)
- Avoid link retraining race that can happen if ASPM sets link control
parameters while the link is in the midst of training for some other
reason (Ilpo Järvinen)
* pci/aspm:
PCI/ASPM: Avoid link retraining race
PCI/ASPM: Factor out pcie_wait_for_retrain()
PCI/ASPM: Return 0 or -ETIMEDOUT from pcie_retrain_link()
PCI/ASPM: Remove unnecessary ASPM_STATE_L1SS check
PCI/ASPM: Rename L1.2-specific functions from 'l1ss' to 'l12'
PCI/ASPM: Set ASPM_STATE_L1 when driver enables L1.1 or L1.2
PCI/ASPM: Set only ASPM_STATE_L1 when driver enables L1
PCI/ASPM: Disable only ASPM_STATE_L1 when driver disables L1
PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free
|
