summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2019-05-14Merge tag 'pci-v5.2-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Add _HPX Type 3 settings support, which gives firmware more influence over device configuration (Alexandru Gagniuc) - Support fixed bus numbers from bridge Enhanced Allocation capabilities (Subbaraya Sundeep) - Add "external-facing" DT property to identify cases where we require IOMMU protection against untrusted devices (Jean-Philippe Brucker) - Enable PCIe services for host controller drivers that use managed host bridge alloc (Jean-Philippe Brucker) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) Peer-to-peer DMA: - Add whitelist of Root Complexes that support peer-to-peer DMA between Root Ports (Christian König) Native controller drivers: - Add PCI host bridge DMA ranges for bridges that can't DMA everywhere, e.g., iProc (Srinath Mannam) - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan Chocron) - Fix Tegra MSI target allocation so DMA doesn't generate unwanted MSIs (Vidya Sagar) - Fix of_node reference leaks (Wen Yang) - Fix Hyper-V module unload & device removal issues (Dexuan Cui) - Cleanup R-Car driver (Marek Vasut) - Cleanup Keystone driver (Kishon Vijay Abraham I) - Cleanup i.MX6 driver (Andrey Smirnov) Significant bug fixes: - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude Paul) - Fix Switchtec firmware update performance issue (Wesley Sheng) - Work around Pericom switch link retraining erratum (Stefan Mätje)" * tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits) MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info() PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible PCI: Cleanup setup-bus.c comments and whitespace PCI: imx6: Allow asynchronous probing PCI: dwc: Save root bus for driver remove hooks PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code PCI: dwc: Free MSI in dw_pcie_host_init() error path PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi() ...
2019-05-13Merge branch 'pci/trivial'Bjorn Helgaas
- Cleanup PCI register definitions, typos, etc (Bjorn Helgaas) - Remove unnecessary use of user-space types in CPER (Bjorn Helgaas) - Cleanup setup-bus.c comments & whitespace (Nicholas Johnson) * pci/trivial: PCI: Cleanup setup-bus.c comments and whitespace CPER: Remove unnecessary use of user-space types CPER: Add UEFI spec references PCI: Fix comment typos PCI: Cleanup register definition width and whitespace # Conflicts: # drivers/pci/pci.c # drivers/pci/setup-bus.c
2019-05-13Merge branch 'pci/printk-portdrv'Bjorn Helgaas
- Change some desirable KERN_DEBUG messages to KERN_INFO/KERN_ERR (Frederick Lawler) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) * pci/printk-portdrv: PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info()
2019-05-13Merge branch 'pci/printk'Bjorn Helgaas
* pci/printk: PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible
2019-05-13Merge branch 'pci/iova-dma-ranges'Bjorn Helgaas
- Add list of legal DMA address ranges to PCI host bridge (Srinath Mannam) - Reserve inaccessible DMA ranges so IOMMU doesn't allocate them (Srinath Mannam) - Parse iProc DT dma-ranges to learn what PCI devices can reach via DMA (Srinath Mannam) * pci/iova-dma-ranges: PCI: iproc: Add sorted dma ranges resource entries to host bridge iommu/dma: Reserve IOVA for PCIe inaccessible DMA address PCI: Add dma_ranges window list # Conflicts: # drivers/pci/probe.c
2019-05-13Merge branch 'remotes/lorenzo/pci/misc'Bjorn Helgaas
- Exit pcitest with error code when test fails (Jean-Jacques Hiblot) - Fix leaked of_node references in dra7xx, uniphier, layerscape, rockchip, aardvark, iproc, mediatek, rpadlpar (Wen Yang) - Fix pcitest "help" option parsing (Kishon Vijay Abraham I) - Fix Makefile bug that inadvertently removes pcitest.sh (Kishon Vijay Abraham I) - Check for alloc_workqueue() failure in endpoint test driver (Kangjie Lu) * remotes/lorenzo/pci/misc: PCI: endpoint: Fix a potential NULL pointer dereference tools: PCI: Handle pcitest.sh independently from pcitest tools: PCI: Add 'h' in optstring of getopt() PCI: mediatek: Fix a leaked reference by adding missing of_node_put() PCI: iproc: Fix a leaked reference by adding missing of_node_put() PCI: aardvark: Fix a leaked reference by adding missing of_node_put() PCI: rockchip: Fix a leaked reference by adding missing of_node_put() PCI: dwc: layerscape: Fix a leaked reference by adding missing of_node_put() PCI: uniphier: Fix a leaked reference by adding missing of_node_put() PCI: dwc: pci-dra7xx: Fix a leaked reference by adding missing of_node_put() tools: PCI: Exit with error code when test fails
2019-05-13Merge branch 'remotes/lorenzo/pci/xilinx'Bjorn Helgaas
- Check for __get_free_pages() failure in xilinx (Kangjie Lu) * remotes/lorenzo/pci/xilinx: PCI: xilinx: Check for __get_free_pages() failure
2019-05-13Merge branch 'remotes/lorenzo/pci/tegra'Bjorn Helgaas
- Use DMA-API to get tegra MSI address to prevent device DMA from generating unwanted MSIs (Vidya Sagar) * remotes/lorenzo/pci/tegra: PCI: tegra: Use the DMA-API to get the MSI address
2019-05-13Merge branch 'remotes/lorenzo/pci/rockchip'Bjorn Helgaas
- Fix rockchip bitwise operations that overflow type (Colin Ian King) * remotes/lorenzo/pci/rockchip: PCI: rockchip: Fix rockchip_pcie_ep_assert_intx() bitwise operations
2019-05-13Merge branch 'remotes/lorenzo/pci/rcar'Bjorn Helgaas
- Use BIT() when appropriate in rcar (Marek Vasut) - Use u32 to match rcar hardware register widths (Marek Vasut) - Use BITS_PER_BYTE when appropriate in rcar (Marek Vasut) - Remove unnecessary casts in rcar (Marek Vasut) - Fix 64-bit MSI target addresses in rcar (Marek Vasut) - Check for __get_free_pages() failure in rcar (Kangjie Lu) - Fix shadowed rcar "irq" variable (Wolfram Sang) * remotes/lorenzo/pci/rcar: PCI: rcar: Do not shadow the 'irq' variable PCI: rcar: Fix a potential NULL pointer dereference PCI: rcar: Fix 64bit MSI message address handling PCI: rcar: Clean up debug messages PCI: rcar: Replace (8 * n) with (BITS_PER_BYTE * n) PCI: rcar: Replace various variable types with unsigned ones for register values PCI: rcar: Replace unsigned long with u32/unsigned int in register accessors PCI: rcar: Clean up remaining macros defining bits # Conflicts: # drivers/pci/controller/pcie-rcar.c
2019-05-13Merge branch 'remotes/lorenzo/pci/mediatek'Bjorn Helgaas
- Make mediatek clocks optional, not required (Chunfeng Yun) - Remove unused mediatek mt2712 "num-lanes" DT property (Honghui Zhang) * remotes/lorenzo/pci/mediatek: arm64: dts: mt2712: Remove un-used property for PCIe PCI: mediatek: Get optional clocks with devm_clk_get_optional()
2019-05-13Merge branch 'remotes/lorenzo/pci/keystone'Bjorn Helgaas
- Move IRQ register address computation inside macros (Kishon Vijay Abraham I) - Separate legacy IRQ and MSI configuration (Kishon Vijay Abraham I) - Use hwirq, not virq, to get MSI IRQ number offset (Kishon Vijay Abraham I) - Squash ks_pcie_handle_msi_irq() into ks_pcie_msi_irq_handler() (Kishon Vijay Abraham I) - Add dwc support for platforms with custom MSI controllers (Kishon Vijay Abraham I) - Add keystone-specific MSI controller (Kishon Vijay Abraham I) - Remove dwc host_ops previously used for keystone-specific MSI (Kishon Vijay Abraham I) - Skip dwc default MSI init if platform has custom MSI controller (Kishon Vijay Abraham I) - Implement .start_link() and .stop_link() for keystone endpoint support (Kishon Vijay Abraham I) - Add keystone "reg-names" DT binding (Kishon Vijay Abraham I) - Squash ks_pcie_dw_host_init() into ks_pcie_add_pcie_port() (Kishon Vijay Abraham I) - Get keystone register resources from DT by name, not index (Kishon Vijay Abraham I) - Get DT resources in .probe() to prepare for endpoint support (Kishon Vijay Abraham I) - Add "ti,syscon-pcie-mode" DT property for PCIe mode configuration (Kishon Vijay Abraham I) - Explicitly set keystone to host mode (Kishon Vijay Abraham I) - Document DT "atu" reg-names requirement for DesignWare core >= 4.80 (Kishon Vijay Abraham I) - Enable dwc iATU unroll for endpoint mode as well as host mode (Kishon Vijay Abraham I) - Add dwc "version" to identify core >= 4.80 for ATU programming (Kishon Vijay Abraham I) - Don't build ARM32-specific keystone code on ARM64 (Kishon Vijay Abraham I) - Add DT binding for keystone PCIe RC in AM654 SoC (Kishon Vijay Abraham I) - Add keystone support for AM654 SoC PCIe RC (Kishon Vijay Abraham I) - Reset keystone PHYs before enabling them (Kishon Vijay Abraham I) - Make of_pci_get_max_link_speed() available to endpoint drivers as well as host drivers (Kishon Vijay Abraham I) - Add keystone support for DT "max-link-speed" property (Kishon Vijay Abraham I) - Add endpoint library support for BAR buffer alignment (Kishon Vijay Abraham I) - Make all dw_pcie_ep_ops structs const (Kishon Vijay Abraham I) - Fix fencepost error in dw_pcie_ep_find_capability() (Kishon Vijay Abraham I) - Add dwc hooks for dbi/dbi2 that share the same address space (Kishon Vijay Abraham I) - Add keystone support for TI AM654x in endpoint mode (Kishon Vijay Abraham I) - Configure designware endpoints to advertise smallest resizable BAR (1MB) (Kishon Vijay Abraham I) - Align designware endpoint ATU windows for raising MSIs (Kishon Vijay Abraham I) - Add endpoint test support for TI AM654x (Kishon Vijay Abraham I) - Fix endpoint test test_reg_bar issue (Kishon Vijay Abraham I) * remotes/lorenzo/pci/keystone: misc: pci_endpoint_test: Fix test_reg_bar to be updated in pci_endpoint_test misc: pci_endpoint_test: Add support to test PCI EP in AM654x PCI: designware-ep: Use aligned ATU window for raising MSI interrupts PCI: designware-ep: Configure Resizable BAR cap to advertise the smallest size PCI: keystone: Add support for PCIe EP in AM654x Platforms dt-bindings: PCI: Add PCI EP DT binding documentation for AM654 PCI: dwc: Add callbacks for accessing dbi2 address space PCI: dwc: Fix dw_pcie_ep_find_capability() to return correct capability offset PCI: dwc: Add const qualifier to struct dw_pcie_ep_ops PCI: endpoint: Add support to specify alignment for buffers allocated to BARs PCI: keystone: Add support to set the max link speed from DT PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers PCI: keystone: Invoke phy_reset() API before enabling PHY PCI: keystone: Add support for PCIe RC in AM654x Platforms dt-bindings: PCI: Add PCI RC DT binding documentation for AM654 PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64 PCI: dwc: Fix ATU identification for designware version >= 4.80 PCI: dwc: Enable iATU unroll for endpoint too dt-bindings: PCI: Document "atu" reg-names PCI: keystone: Explicitly set the PCIe mode dt-bindings: PCI: Add dt-binding to configure PCIe mode PCI: keystone: Move resources initialization to prepare for EP support PCI: keystone: Use platform_get_resource_byname() to get memory resources PCI: keystone: Perform host initialization in a single function dt-bindings: PCI: keystone: Add "reg-names" binding information PCI: keystone: Cleanup error_irq configuration PCI: keystone: Add start_link()/stop_link() dw_pcie_ops PCI: dwc: Remove default MSI initialization for platform specific MSI chips PCI: dwc: Remove Keystone specific dw_pcie_host_ops PCI: keystone: Use Keystone specific msi_irq_chip PCI: dwc: Add support to use non default msi_irq_chip PCI: keystone: Cleanup ks_pcie_msi_irq_handler() PCI: keystone: Use hwirq to get the MSI IRQ number offset PCI: keystone: Add separate functions for configuring MSI and legacy interrupt PCI: keystone: Cleanup interrupt related macros # Conflicts: # drivers/pci/controller/dwc/pcie-designware.h
2019-05-13Merge branch 'remotes/lorenzo/pci/iproc'Bjorn Helgaas
- Work around iproc CRS completion issues (Srinath Mannam) - Allow smaller iproc outbound windows so driver can work on 32-bit systems (Srinath Mannam) - Use iproc-specific config read for PAXBv2 (not PAXB) (Srinath Mannam) * remotes/lorenzo/pci/iproc: PCI: iproc: Enable iProc config read for PAXBv2 PCI: iproc: Allow outbound configuration for 32-bit I/O region PCI: iproc: Add CRS check in config read
2019-05-13Merge branch 'remotes/lorenzo/pci/imx'Bjorn Helgaas
- Simplify imx7d_pcie_wait_for_phy_pll_lock() by using regmap_read_poll_timeout() (Andrey Smirnov) - Drop imx6_pcie_wait_for_link() in favor of the more generic dw_pcie_wait_for_link() (Andrey Smirnov) - Return -ETIMEDOUT instead of -EINVAL from imx6_pcie_wait_for_speed_change() (Andrey Smirnov) - Remove unused PCIE_PL_PFLR_* constants from imx6 (Andrey Smirnov) - Use shared PHY debug register definitions in imx6 (Andrey Smirnov) - Use BIT() in imx6 (Andrey Smirnov) - Simplify imx6 PHY bit operations (Andrey Smirnov) - Simplify imx6 pcie_phy_poll_ack() (Andrey Smirnov) - Use data types that match actual imx6 PHY register width (Andrey Smirnov) - Mark imx6 suspend support with drvdata flags instead of checking variants (Andrey Smirnov) - Sleep instead of delay in imx6_pcie_enable_ref_clk() (Andrey Smirnov) * remotes/lorenzo/pci/imx: PCI: imx6: Use usleep_range() in imx6_pcie_enable_ref_clk() PCI: imx6: Use flags to indicate support for suspend PCI: imx6: Restrict PHY register data to 16-bit PCI: imx6: Simplify pcie_phy_poll_ack() PCI: imx6: Simplify bit operations in PHY functions PCI: imx6: Make use of BIT() in constant definitions PCI: dwc: imx6: Share PHY debug register definitions PCI: imx6: Remove PCIE_PL_PFLR_* constants PCI: imx6: Return -ETIMEOUT from imx6_pcie_wait_for_speed_change() PCI: imx6: Drop imx6_pcie_wait_for_link() PCI: imx6: Simplify imx7d_pcie_wait_for_phy_pll_lock()
2019-05-13Merge branch 'pci/dwc'Bjorn Helgaas
- Use generic config space reader in qcom (Marc Gonzalez) - Stop calling IRQ handler cleanup in dwc driver for invalid MSI IRQs (Jisheng Zhang) - Free dwc MSI target page when freeing MSI (Jisheng Zhang) - Fix dwc MSI leak in host init error path (Jisheng Zhang) - Use managed host bridge alloc to simplify dwc (Jisheng Zhang) - Save dwc root pci_bus pointer for use by .remove() methods (Jisheng Zhang) - Allow imx6 asynchronous probing (Lucas Stach) * pci/dwc: PCI: imx6: Allow asynchronous probing PCI: dwc: Save root bus for driver remove hooks PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code PCI: dwc: Free MSI in dw_pcie_host_init() error path PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi() PCI: dwc: Fix dw_pcie_free_msi() if msi_irq is invalid PCI: qcom: Use default config space read function
2019-05-13Merge branch 'remotes/lorenzo/pci/controller-fixes'Bjorn Helgaas
- Restore R-Car PCIe link early in resume (Kazufumi Ikeda) - Fix Hyper-V PCI ejection memory leak (Dexuan Cui) - Cleanup Hyper-V PCI slots on module unload (Dexuan Cui) - Cleanup Hyper-V PCI slot on device removal to address a race (Dexuan Cui) * remotes/lorenzo/pci/controller-fixes: PCI: hv: Add pci_destroy_slot() in pci_devices_present_work(), if necessary PCI: hv: Add hv_pci_remove_slots() when we unload the driver PCI: hv: Fix a memory leak in hv_eject_device_work() PCI: rcar: Add the initialization of PCIe link in resume_noirq()
2019-05-13Merge branch 'pci/host/al'Bjorn Helgaas
- Add Amazon Annapurna Labs PCIe host controller driver (Jonathan Chocron) * pci/host/al: PCI: al: Add Amazon Annapurna Labs PCIe host controller driver
2019-05-13Merge branch 'pci/virtualization'Bjorn Helgaas
- Mark ATS on AMD Stoney Radeon R7 GPU broken to avoid IOMMU issues (Nikolai Kostrigin) - Mark Atheros AR9462 to avoid bus reset that locks up host machine (James Prestwood) * pci/virtualization: PCI: Mark Atheros AR9462 to avoid bus reset PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken
2019-05-13Merge branch 'pci/switchtec'Bjorn Helgaas
- Support all 255 PFF ports in switchtec driver (Wesley Sheng) - Fix unintentional switchtec MRPC event masking that degraded firmware update speed (Wesley Sheng) * pci/switchtec: switchtec: Fix unintended mask of MRPC event switchtec: Increase PFF limit from 48 to 255
2019-05-13Merge branch 'pci/portdrv'Bjorn Helgaas
- Disable Link Management interrupt during suspend to prevent immediate wakeup (Mika Westerberg) * pci/portdrv: PCI/LINK: Disable bandwidth notification interrupt during suspend
2019-05-13Merge branch 'pci/peer-to-peer'Bjorn Helgaas
- Add a whitelist of Root Complexes known to support peer-to-peer DMA between Root Ports (Christian König) * pci/peer-to-peer: PCI/P2PDMA: Allow P2P DMA between any devices under AMD ZEN Root Complex
2019-05-13Merge branch 'pci/misc'Bjorn Helgaas
- Mark expected switch fall-throughs (Gustavo A. R. Silva) - Remove unused pci_request_region_exclusive() (Johannes Thumshirn) - Fix x86 PCI IRQ routing table memory leak (Wenwen Wang) - Reset Lenovo ThinkPad P50 if firmware didn't do it on reboot (Lyude Paul) - Add and use pci_dev_id() helper to simplify PCI_DEVID() usage (touches several places outside drivers/pci/) (Heiner Kallweit) - Transition Mobiveil PCI maintenance to Karthikeyan M and Hou Zhiqiang (Subrahmanya Lingappa) * pci/misc: MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI platform/chrome: chromeos_laptop: use pci_dev_id() helper stmmac: pci: Use pci_dev_id() helper iommu/vt-d: Use pci_dev_id() helper iommu/amd: Use pci_dev_id() helper drm/amdkfd: Use pci_dev_id() helper powerpc/powernv/npu: Use pci_dev_id() helper r8169: use pci_dev_id() helper PCI: Add pci_dev_id() helper PCI: Reset Lenovo ThinkPad P50 nvgpu at boot if necessary x86/PCI: Fix PCI IRQ routing table memory leak PCI: Remove unused pci_request_region_exclusive() PCI: Mark expected switch fall-throughs
2019-05-13Merge branch 'pci/msi'Bjorn Helgaas
- Remove unused mask_msi_irq(), unmask_msi_irq(), write_msi_msg(), __write_msi_msg() (Bjorn Helgaas) * pci/msi: PCI/MSI: Remove unused mask_msi_irq() and unmask_msi_irq() PCI/MSI: Remove unused __write_msi_msg() and write_msi_msg()
2019-05-13Merge branch 'pci/hotplug'Bjorn Helgaas
- Fix RPA and RPA DLPAR refcount issues (Tyrel Datwyler) - Stop exporting pci_get_hp_params() (Alexandru Gagniuc) - Simplify _HPP, _HPX parsing (Alexandru Gagniuc) - Add support for _HPX Type 3 settings (Alexandru Gagniuc) - Tell firmware we support _HPX Type 3 via _OSC (Alexandru Gagniuc) * pci/hotplug: PCI/ACPI: Advertise _HPX Type 3 support via _OSC PCI/ACPI: Implement _HPX Type 3 Setting Record PCI/ACPI: Remove the need for 'struct hotplug_params' PCI/ACPI: Do not export pci_get_hp_params() PCI: rpaphp: Get/put device node reference during slot alloc/dealloc PCI: rpadlpar: Fix leaked device_node references in add/remove paths
2019-05-13Merge branch 'pci/enumeration'Bjorn Helgaas
- Enable PCIe services for host controller drivers that use managed host bridge alloc (Jean-Philippe Brucker) - Add quirk to clear PCIe Retrain Link bit to work around Pericom bridge erratum (Stefan Mätje) - Add "external-facing" DT property to identify cases where we require IOMMU protection from untrusted devices (Jean-Philippe Brucker) - Support fixed bus numbers from bridge Enhanced Allocation capabilities (Subbaraya Sundeep) * pci/enumeration: PCI: Assign bus numbers present in EA capability for bridges PCI: OF: Support "external-facing" property dt-bindings: Add "external-facing" PCIe port property PCI: Rework pcie_retrain_link() wait loop PCI: Work around Pericom PCIe-to-PCI bridge Retrain Link erratum PCI: Factor out pcie_retrain_link() function PCI: Init PCIe feature bits for managed host bridge alloc
2019-05-09PCI: pciehp: Remove pointless MY_NAME definitionBjorn Helgaas
MY_NAME is only used once and offers no benefit, so remove it. Link: https://lore.kernel.org/lkml/20190509141456.223614-11-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-05-09PCI: pciehp: Remove pointless PCIE_MODULE_NAME definitionBjorn Helgaas
PCIE_MODULE_NAME is only used once and offers no benefit, so remove it. Link: https://lore.kernel.org/lkml/20190509141456.223614-10-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-05-09PCI: pciehp: Remove unused dbg/err/info/warn() wrappersFrederick Lawler
Replace the last uses of dbg() with the equivalent pr_debug(), then remove unused dbg(), err(), info(), and warn() wrappers. Link: https://lore.kernel.org/lkml/20190509141456.223614-9-helgaas@kernel.org Signed-off-by: Frederick Lawler <fred@fredlawl.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-05-09PCI: pciehp: Log messages with pci_dev, not pcie_deviceFrederick Lawler
Log messages with pci_dev, not pcie_device. Factor out common message prefixes with dev_fmt(). Example output change: - pciehp 0000:00:06.0:pcie004: Slot(0) Powering on due to button press + pcieport 0000:00:06.0: pciehp: Slot(0) Powering on due to button press Link: https://lore.kernel.org/lkml/20190509141456.223614-8-helgaas@kernel.org Signed-off-by: Frederick Lawler <fred@fredlawl.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-05-09PCI: pciehp: Replace pciehp_debug module param with dyndbgFrederick Lawler
Previously pciehp debug messages were enabled by the pciehp_debug module parameter, e.g., by booting with this kernel command line option: pciehp.pciehp_debug=1 Convert this mechanism to use the generic dynamic debug (dyndbg) feature. After this commit, pciehp debug messages are enabled by building the kernel with CONFIG_DYNAMIC_DEBUG=y and booting with this command line option: dyndbg="file pciehp* +p" The dyndbg facility is much more flexible: messages can be enabled at boot- or run-time based on the file name, function name, line number, message test, etc. See Documentation/admin-guide/dynamic-debug-howto.rst for more details. Link: https://lore.kernel.org/lkml/20190509141456.223614-7-helgaas@kernel.org Signed-off-by: Frederick Lawler <fred@fredlawl.com> [bhelgaas: commit log, comment, remove pciehp_debug parameter] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-05-09PCI: pciehp: Remove pciehp_debug usesBjorn Helgaas
We're about to convert pciehp to the dyndbg mechanism, which means we can eventually remove pciehp_debug. Replace uses of pciehp_debug with dbg() and ctrl_dbg(), which check pciehp_debug internally. Link: https://lore.kernel.org/lkml/20190509141456.223614-6-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-05-09PCI/AER: Log messages with pci_dev, not pcie_deviceFrederick Lawler
Log messages with pci_dev, not pcie_device. Factor out common message prefixes with dev_fmt(). Example output change: - aer 0000:00:00.0:pci002: AER enabled with IRQ ... + pcieport 0000:00:00.0: AER: enabled with IRQ ... Link: https://lore.kernel.org/lkml/20190509141456.223614-5-helgaas@kernel.org Signed-off-by: Frederick Lawler <fred@fredlawl.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-05-09PCI/DPC: Log messages with pci_dev, not pcie_deviceFrederick Lawler
Log messages with pci_dev, not pcie_device. Factor out common message prefixes with dev_fmt(). Example output change: - dpc 0000:00:01.1:pcie008: DPC error containment capabilities... + pcieport 0000:00:01.1: DPC: error containment capabilities... Link: https://lore.kernel.org/lkml/20190509141456.223614-4-helgaas@kernel.org Signed-off-by: Frederick Lawler <fred@fredlawl.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2019-05-09PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info()Frederick Lawler
Replace dev_printk(KERN_DEBUG) with dev_info() or dev_err() to be more consistent with other logging. These could be converted to dev_dbg(), but that depends on CONFIG_DYNAMIC_DEBUG and DEBUG, and we want most of these messages to *always* be in the dmesg log. Also, use dev_fmt() to add the service name. Example output change: - pcieport 0000:80:10.0: Signaling PME with IRQ ... + pcieport 0000:80:10.0: PME: Signaling with IRQ ... Link: https://lore.kernel.org/lkml/20190509141456.223614-3-helgaas@kernel.org Signed-off-by: Frederick Lawler <fred@fredlawl.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2019-05-09PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info()Frederick Lawler
Replace dev_printk(KERN_DEBUG) with dev_info() or dev_err() to be more consistent with other logging. These could be converted to dev_dbg(), but that depends on CONFIG_DYNAMIC_DEBUG and DEBUG, and we want most of these messages to *always* be in the dmesg log. Also remove a redundant kzalloc() failure message. Link: https://lore.kernel.org/lkml/20190509141456.223614-2-helgaas@kernel.org Signed-off-by: Frederick Lawler <fred@fredlawl.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2019-05-09PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etcMohan Kumar
Replace dev_printk(KERN_DEBUG) with dev_info(), etc to be more consistent with other logging and avoid checkpatch warnings. The KERN_DEBUG messages could be converted to dev_dbg(), but that depends on CONFIG_DYNAMIC_DEBUG and DEBUG, and we want most of these messages to *always* be in the dmesg log. Link: https://lore.kernel.org/lkml/1555733240-19875-1-git-send-email-mohankumar718@gmail.com Signed-off-by: Mohan Kumar <mohankumar718@gmail.com> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-05-09PCI: Replace printk(KERN_INFO) with pr_info(), etcMohan Kumar
Replace printk() with pr_*() to be more consistent with other logging and avoid checkpatch warnings. Link: https://lore.kernel.org/lkml/1555733026-19609-1-git-send-email-mohankumar718@gmail.com Link: https://lore.kernel.org/lkml/1555733130-19804-1-git-send-email-mohankumar718@gmail.com Signed-off-by: Mohan Kumar <mohankumar718@gmail.com> [bhelgaas: squash in similar changes from second patch in series] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-05-09PCI: Use dev_printk() when possibleBjorn Helgaas
Use dev_printk() when possible. This makes messages more consistent with other device-related messages and, in some cases, adds useful information. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-05-07PCI: Cleanup setup-bus.c comments and whitespaceNicholas Johnson
Cleanup comments, kernel-doc, coding style. No functional changes intended; comment and whitespace changes only. Link: https://lore.kernel.org/lkml/PS2P216MB06427E290A68CDB921FB4B2980250@PS2P216MB0642.KORP216.PROD.OUTLOOK.COM Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> [bhelgaas: tidy related things throughout the file] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-05-07Merge tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linuxLinus Torvalds
Pull stream_open conversion from Kirill Smelkov: - remove unnecessary double nonseekable_open from drivers/char/dtlk.c as noticed by Pavel Machek while reviewing nonseekable_open -> stream_open mass conversion. - the mass conversion patch promised in commit 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock") and is automatically generated by running $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. More details on this in the patch. - finally, change VFS to pass ppos=NULL into .read/.write for files that declare themselves streams. It was suggested by Rasmus Villemoes and makes sure that if ppos starts to be erroneously used in a stream file, such bug won't go unnoticed and will produce an oops instead of creating illusion of position change being taken into account. Note: this patch does not conflict with "fuse: Add FOPEN_STREAM to use stream_open()" that will be hopefully coming via FUSE tree, because fs/fuse/ uses new-style .read_iter/.write_iter, and for these accessors position is still passed as non-pointer kiocb.ki_pos . * tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux: vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files *: convert stream-like files from nonseekable_open -> stream_open dtlk: remove double call to nonseekable_open
2019-05-07Merge tag 'printk-for-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow state reset of printk_once() calls. - Prevent crashes when dereferencing invalid pointers in vsprintf(). Only the first byte is checked for simplicity. - Make vsprintf warnings consistent and inlined. - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf modifiers. - Some clean up of vsprintf and test_printf code. * tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: lib/vsprintf: Make function pointer_string static vsprintf: Limit the length of inlined error messages vsprintf: Avoid confusion between invalid address and value vsprintf: Prevent crash when dereferencing invalid pointers vsprintf: Consolidate handling of unknown pointer specifiers vsprintf: Factor out %pO handler as kobject_string() vsprintf: Factor out %pV handler as va_format() vsprintf: Factor out %p[iI] handler as ip_addr_string() vsprintf: Do not check address of well-known strings vsprintf: Consistent %pK handling for kptr_restrict == 0 vsprintf: Shuffle restricted_pointer() printk: Tie printk_once / printk_deferred_once into .data.once for reset treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively lib/test_printf: Switch to bitmap_zalloc()
2019-05-07PCI: imx6: Allow asynchronous probingLucas Stach
Establishing a PCIe link can take a while; allow asynchronous probing so that link establishment can happen in the background while other devices are being probed. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-05-07PCI: dwc: Save root bus for driver remove hooksJisheng Zhang
Currently DWC host does not support the remove callback, but nothing prevents us from supporting it. Save the root bus for clean up work in driver remove code paths to allow DWC host drivers to implement their remove hook as, eg: static int foo_pcie_remove(struct platform_device *pdev) { ... pci_stop_root_bus(pp->root_bus); pci_remove_root_bus(pp->root_bus); dw_pcie_free_msi(pp); ... } Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2019-05-07PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify codeJisheng Zhang
Use devm_pci_alloc_host_bridge() to simplify the error code path. This also fixes a leak in the dw_pcie_host_init() error path. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> CC: stable@vger.kernel.org # v4.13+
2019-05-07PCI: dwc: Free MSI in dw_pcie_host_init() error pathJisheng Zhang
If we ever did MSI-related initializations, we need to call dw_pcie_free_msi() in the error code path. Remove the IS_ENABLED(CONFIG_PCI_MSI) check for MSI init because pci_msi_enabled() already has a stub for !CONFIG_PCI_MSI. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2019-05-07PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi()Jisheng Zhang
To avoid a memory leak, free the page allocated for MSI IRQ in dw_pcie_free_msi(). Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2019-05-07PCI: dwc: Fix dw_pcie_free_msi() if msi_irq is invalidJisheng Zhang
Check msi_irq variable before calling irq_set_chained_handler() and irq_set_handler_data(), lest we call those functions for an invalid MSI IRQ. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2019-05-07PCI: qcom: Use default config space read functionMarc Gonzalez
Move the device class fudge to a proper fixup function, and remove qcom_pcie_rd_own_conf() which has become useless. dw_pcie_setup_rc() already did the right thing, but it's broken on older qcom chips, such as 8064. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2019-05-06Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "A handful of cleanups: dma-ops cleanups, missing boot time kcalloc() check, a Sparse fix and use struct_size() to simplify a vzalloc() call" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pci: Clean up usage of X86_DEV_DMA_OPS x86/Kconfig: Remove the unused X86_DMA_REMAP KConfig symbol x86/kexec/crash: Use struct_size() in vzalloc() x86/mm/tlb: Define LOADED_MM_SWITCHING with pointer-sized number x86/platform/uv: Fix missing checks of kcalloc() return values
2019-05-06PCI: iproc: Add sorted dma ranges resource entries to host bridgeSrinath Mannam
The iProc host controller allows only a subset of physical address space as target of inbound PCI memory transaction addresses. PCI device memory transactions targeting memory regions that are not allowed for inbound transactions in the host controller are rejected by the host controller and cannot reach the upstream buses. The firmware device tree description defines the DMA ranges that are addressable by devices DMA transactions; parse the device tree dma-ranges property and add its ranges to the PCI host bridge dma_ranges list; the iova_reserve_pci_windows() call executed at iommu_dma_init_domain() will reserve the IOVA address ranges that are not addressable (ie memory holes in the dma-ranges set) so that they are not allocated to PCI devices for DMA transfers. All allowed address ranges are listed in the dma-ranges DT parameter. For example: dma-ranges = < \ 0x43000000 0x00 0x80000000 0x00 0x80000000 0x00 0x80000000 \ 0x43000000 0x08 0x00000000 0x08 0x00000000 0x08 0x00000000 \ 0x43000000 0x80 0x00000000 0x80 0x00000000 0x40 0x00000000> In the above example of dma-ranges, memory address from 0x0 - 0x80000000, 0x100000000 - 0x800000000, 0x1000000000 - 0x8000000000 and 0x10000000000 - 0xffffffffffffffff. are not allowed to be used as inbound addresses. Based-on-a-patch-by: Oza Pawandeep <oza.oza@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> [bhelgaas: fix function prototype style] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Oza Pawandeep <poza@codeaurora.org> Reviewed-by: Eric Auger <eric.auger@redhat.com>