summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2020-02-27PCI: brcmstb: Fix build on 32bit ARM platforms with older compilersMarek Szyprowski
Some older compilers have no implementation for the helper for 64-bit unsigned division/modulo, so linking pcie-brcmstb driver causes the "undefined reference to `__aeabi_uldivmod'" error. *rc_bar2_size is always a power of two, because it is calculated as: "1ULL << fls64(entry->res->end - entry->res->start)", so the modulo operation in the subsequent check can be replaced by a simple logical AND with a proper mask. Link: https://lore.kernel.org/r/20200227115146.24515-1-m.szyprowski@samsung.com Fixes: c0452137034b ("PCI: brcmstb: Add Broadcom STB PCIe host controller driver") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-02-06Merge tag 'pci-v5.6-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Define to_pci_sysdata() always to fix build breakage when !CONFIG_PCI (Jason A. Donenfeld) - Use PF PASID for VFs to fix VF IOMMU bind failures (Kuppuswamy Sathyanarayanan) * tag 'pci-v5.6-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/ATS: Use PF PASID for VFs x86/PCI: Define to_pci_sysdata() even when !CONFIG_PCI
2020-02-05PCI/ATS: Use PF PASID for VFsKuppuswamy Sathyanarayanan
Per PCIe r5.0, sec 9.3.7.14, if a PF implements the PASID Capability, the PF PASID configuration is shared by its VFs, and VFs must not implement their own PASID Capability. But commit 751035b8dc06 ("PCI/ATS: Cache PASID Capability offset") changed pci_max_pasids() and pci_pasid_features() to use the PASID Capability of the VF device instead of the associated PF device. This leads to IOMMU bind failures when pci_max_pasids() and pci_pasid_features() are called for VFs. In pci_max_pasids() and pci_pasid_features(), always use the PF PASID Capability. Fixes: 751035b8dc06 ("PCI/ATS: Cache PASID Capability offset") Link: https://lore.kernel.org/r/fe891f9755cb18349389609e7fed9940fc5b081a.1580325170.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v5.5+
2020-02-05Merge tag 'iommu-updates-v5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Allow compiling the ARM-SMMU drivers as modules. - Fixes and cleanups for the ARM-SMMU drivers and io-pgtable code collected by Will Deacon. The merge-commit (6855d1ba7537) has all the details. - Cleanup of the iommu_put_resv_regions() call-backs in various drivers. - AMD IOMMU driver cleanups. - Update for the x2APIC support in the AMD IOMMU driver. - Preparation patches for Intel VT-d nested mode support. - RMRR and identity domain handling fixes for the Intel VT-d driver. - More small fixes and cleanups. * tag 'iommu-updates-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits) iommu/amd: Remove the unnecessary assignment iommu/vt-d: Remove unnecessary WARN_ON_ONCE() iommu/vt-d: Unnecessary to handle default identity domain iommu/vt-d: Allow devices with RMRRs to use identity domain iommu/vt-d: Add RMRR base and end addresses sanity check iommu/vt-d: Mark firmware tainted if RMRR fails sanity check iommu/amd: Remove unused struct member iommu/amd: Replace two consecutive readl calls with one readq iommu/vt-d: Don't reject Host Bridge due to scope mismatch PCI/ATS: Add PASID stubs iommu/arm-smmu-v3: Return -EBUSY when trying to re-add a device iommu/arm-smmu-v3: Improve add_device() error handling iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE iommu/arm-smmu-v3: Add second level of context descriptor table iommu/arm-smmu-v3: Prepare for handling arm_smmu_write_ctx_desc() failure iommu/arm-smmu-v3: Propagate ssid_bits iommu/arm-smmu-v3: Add support for Substream IDs iommu/arm-smmu-v3: Add context descriptor tables allocators iommu/arm-smmu-v3: Prepare arm_smmu_s1_cfg for SSID support ACPI/IORT: Parse SSID property of named component node ...
2020-02-04Merge tag 'powerpc-5.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "A pretty small batch for us, and apologies for it being a bit late, I wanted to sneak Christophe's user_access_begin() series in. Summary: - Implement user_access_begin() and friends for our platforms that support controlling kernel access to userspace. - Enable CONFIG_VMAP_STACK on 32-bit Book3S and 8xx. - Some tweaks to our pseries IOMMU code to allow SVMs ("secure" virtual machines) to use the IOMMU. - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 32-bit VDSO, and some other improvements. - A series to use the PCI hotplug framework to control opencapi card's so that they can be reset and re-read after flashing a new FPGA image. As well as other minor fixes and improvements as usual. Thanks to: Alastair D'Silva, Alexandre Ghiti, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Bai Yingjie, Chen Zhou, Christophe Leroy, Frederic Barrat, Greg Kurz, Jason A. Donenfeld, Joel Stanley, Jordan Niethe, Julia Lawall, Krzysztof Kozlowski, Laurent Dufour, Laurentiu Tudor, Linus Walleij, Michael Bringmann, Nathan Chancellor, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Peter Ujfalusi, Pingfan Liu, Ram Pai, Randy Dunlap, Russell Currey, Sam Bobroff, Sebastian Andrzej Siewior, Shawn Anastasio, Stephen Rothwell, Steve Best, Sukadev Bhattiprolu, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain" * tag 'powerpc-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (131 commits) powerpc: configs: Cleanup old Kconfig options powerpc/configs/skiroot: Enable some more hardening options powerpc/configs/skiroot: Disable xmon default & enable reboot on panic powerpc/configs/skiroot: Enable security features powerpc/configs/skiroot: Update for symbol movement only powerpc/configs/skiroot: Drop default n CONFIG_CRYPTO_ECHAINIV powerpc/configs/skiroot: Drop HID_LOGITECH powerpc/configs: Drop NET_VENDOR_HP which moved to staging powerpc/configs: NET_CADENCE became NET_VENDOR_CADENCE powerpc/configs: Drop CONFIG_QLGE which moved to staging powerpc: Do not consider weak unresolved symbol relocations as bad powerpc/32s: Fix kasan_early_hash_table() for CONFIG_VMAP_STACK powerpc: indent to improve Kconfig readability powerpc: Provide initial documentation for PAPR hcalls powerpc: Implement user_access_save() and user_access_restore() powerpc: Implement user_access_begin and friends powerpc/32s: Prepare prevent_user_access() for user_access_end() powerpc/32s: Drop NULL addr verification powerpc/kuap: Fix set direction in allow/prevent_user_access() powerpc/32s: Fix bad_kuap_fault() ...
2020-02-04treewide: remove redundant IS_ERR() before error code checkMasahiro Yamada
'PTR_ERR(p) == -E*' is a stronger condition than IS_ERR(p). Hence, IS_ERR(p) is unneeded. The semantic patch that generates this commit is as follows: // <smpl> @@ expression ptr; constant error_code; @@ -IS_ERR(ptr) && (PTR_ERR(ptr) == - error_code) +PTR_ERR(ptr) == - error_code // </smpl> Link: http://lkml.kernel.org/r/20200106045833.1725-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Stephen Boyd <sboyd@kernel.org> [drivers/clk/clk.c] Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [GPIO] Acked-by: Wolfram Sang <wsa@the-dreams.de> [drivers/i2c] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [acpi/scan.c] Acked-by: Rob Herring <robh@kernel.org> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31Merge tag 'pci-v5.6-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Resource management: - Improve resource assignment for hot-added nested bridges, e.g., Thunderbolt (Nicholas Johnson) Power management: - Optionally print config space of devices before suspend (Chen Yu) - Increase D3 delay for AMD Ryzen5/7 XHCI controllers (Daniel Drake) Virtualization: - Generalize DMA alias quirks (James Sewart) - Add DMA alias quirk for PLX PEX NTB (James Sewart) - Fix IOV memory leak (Navid Emamdoost) AER: - Log which device prevents error recovery (Yicong Yang) Peer-to-peer DMA: - Whitelist Intel SkyLake-E (Armen Baloyan) Broadcom iProc host bridge driver: - Apply PAXC quirk whether driver is built-in or module (Wei Liu) Broadcom STB host bridge driver: - Add Broadcom STB PCIe host controller driver (Jim Quinlan) Intel Gateway SoC host bridge driver: - Add driver for Intel Gateway SoC (Dilip Kota) Intel VMD host bridge driver: - Add support for DMA aliases on other buses (Jon Derrick) - Remove dma_map_ops overrides (Jon Derrick) - Remove now-unused X86_DEV_DMA_OPS (Christoph Hellwig) NVIDIA Tegra host bridge driver: - Fix Tegra30 afi_pex2_ctrl register offset (Marcel Ziswiler) Panasonic UniPhier host bridge driver: - Remove module code since driver can't be built as a module (Masahiro Yamada) Qualcomm host bridge driver: - Add support for SDM845 PCIe controller (Bjorn Andersson) TI Keystone host bridge driver: - Fix "num-viewport" DT property error handling (Kishon Vijay Abraham I) - Fix link training retries initiation (Yurii Monakov) - Fix outbound region mapping (Yurii Monakov) Misc: - Add Switchtec Gen4 support (Kelvin Cao) - Add Switchtec Intercomm Notify and Upstream Error Containment support (Logan Gunthorpe) - Use dma_set_mask_and_coherent() since Switchtec supports 64-bit addressing (Wesley Sheng)" * tag 'pci-v5.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (60 commits) PCI: Allow adjust_bridge_window() to shrink resource if necessary PCI: Set resource size directly in adjust_bridge_window() PCI: Rename extend_bridge_window() to adjust_bridge_window() PCI: Rename extend_bridge_window() parameter PCI: Consider alignment of hot-added bridges when assigning resources PCI: Remove local variable usage in pci_bus_distribute_available_resources() PCI: Pass size + alignment to pci_bus_distribute_available_resources() PCI: Rename variables PCI: vmd: Add two VMD Device IDs PCI: Remove unnecessary braces PCI: brcmstb: Add MSI support PCI: brcmstb: Add Broadcom STB PCIe host controller driver x86/PCI: Remove X86_DEV_DMA_OPS PCI: vmd: Remove dma_map_ops overrides iommu/vt-d: Remove VMD child device sanity check iommu/vt-d: Use pci_real_dma_dev() for mapping PCI: Introduce pci_real_dma_dev() x86/PCI: Expose VMD's pci_dev in struct pci_sysdata x86/PCI: Add to_pci_sysdata() helper PCI/AER: Initialize aer_fifo ...
2020-01-29Merge branch 'remotes/lorenzo/pci/uniphier'Bjorn Helgaas
- Remove unused modular code from uniphier, which cannot be built as a module (Masahiro Yamada) * remotes/lorenzo/pci/uniphier: PCI: uniphier: remove module code from built-in driver
2020-01-29Merge branch 'remotes/lorenzo/pci/tegra'Bjorn Helgaas
- Fix checking of pm_runtime_get_sync() return value (David Engraf) - Fix AFI_PEX2_CTRL reg offset for Tegra30 (Marcel Ziswiler) * remotes/lorenzo/pci/tegra: PCI: tegra: Fix afi_pex2_ctrl reg offset for Tegra30 PCI: tegra: Fix return value check of pm_runtime_get_sync()
2020-01-29Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas
- Add DT clock/reset info for SDM845 PCIe controller (Bjorn Andersson) - Add support for SDM845 PCIe controller to the qcom driver (Bjorn Andersson) * remotes/lorenzo/pci/qcom: PCI: qcom: Add support for SDM845 PCIe controller dt-bindings: PCI: qcom: Add support for SDM845 PCIe
2020-01-29Merge branch 'remotes/lorenzo/pci/misc'Bjorn Helgaas
- Fix "EXYNOS" typographical styling (Krzysztof Kozlowski) - Update MAINTAINERS with Andrew Murray's email address (Andrew Murray) * remotes/lorenzo/pci/misc: MAINTAINERS: Update my email address PCI: exynos: Rename Exynos to lowercase
2020-01-29Merge branch 'remotes/lorenzo/pci/keystone'Bjorn Helgaas
- Fix link training so we can do it more than once (Yurii Monakov) - Fix keystone outbound window mapping (Yurii Monakov) - Fix error handling when DT lacks "num-viewport" (Kishon Vijay Abraham I) * remotes/lorenzo/pci/keystone: PCI: keystone: Fix error handling when "num-viewport" DT property is not populated PCI: keystone: Fix outbound region mapping PCI: keystone: Fix link training retries initiation
2020-01-29Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas
- Add intel-gw driver for PCIe host controller on Intel Gateway SoC (Dilip Kota) - Use shared DesignWare helpers to configure Fast Training Sequence (FTS) in artpec6 (Dilip Kota) * remotes/lorenzo/pci/dwc: PCI: artpec6: Configure FTS with dwc helper function PCI: dwc: intel: PCIe RC controller driver dt-bindings: PCI: intel: Add YAML schemas for the PCIe RC controller
2020-01-29Merge branch 'remotes/lorenzo/pci/brcmstb'Bjorn Helgaas
- Add brcmstb PCIe bindings for Raspberry Pi 4 (Jim Quinlan) - Add Broadcom STB PCIe host controller driver (Jim Quinlan) - Add MSI support for Broadcom STB PCIe host controller driver (Jim Quinlan) * remotes/lorenzo/pci/brcmstb: PCI: brcmstb: Add MSI support PCI: brcmstb: Add Broadcom STB PCIe host controller driver dt-bindings: PCI: Add bindings for brcmstb's PCIe device
2020-01-29Merge branch 'pci/host-vmd'Bjorn Helgaas
- Save VMD's pci_dev in x86 struct pci_sysdata (Jon Derrick) - Add pci_real_dma_dev() for DMA aliases not on the same bus as requester (Jon Derrick) - Add IOMMU mappings for pci_real_dma_dev() (Jon Derrick) - Remove IOMMU sanity checks for VMD devices (Jon Derrick) - Remove VMD dma_map_ops overrides (Jon Derrick) - Remove unused X86_DEV_DMA_OPS (Christoph Hellwig) - Add VMD device IDs that need bus restriction mode (Sushma Kalakota) * pci/host-vmd: PCI: vmd: Add two VMD Device IDs x86/PCI: Remove X86_DEV_DMA_OPS PCI: vmd: Remove dma_map_ops overrides iommu/vt-d: Remove VMD child device sanity check iommu/vt-d: Use pci_real_dma_dev() for mapping PCI: Introduce pci_real_dma_dev() x86/PCI: Expose VMD's pci_dev in struct pci_sysdata x86/PCI: Add to_pci_sysdata() helper
2020-01-29Merge branch 'pci/virtualization'Bjorn Helgaas
- Fix memory leak in pci_iov_add_virtfn() (Navid Emamdoost) - Extend pci_add_dma_alias() so it can add a range of aliases (James Sewart) - Add DMA aliases for PLX PEX NTB (James Sewart) * pci/virtualization: PCI: Add DMA alias quirk for PLX PEX NTB PCI: Add nr_devfns parameter to pci_add_dma_alias() PCI: Fix pci_add_dma_alias() bitmask size PCI/IOV: Fix memory leak in pci_iov_add_virtfn()
2020-01-29Merge branch 'pci/switchtec'Bjorn Helgaas
- Support 64-bit addressing for both streaming and coherent DMA (Wesley Sheng) - Read vep_vector_number with 16-bit, not 32-bit read (Logan Gunthorpe) - Add Intercomm Notify and Upstream Error Containment support (Logan Gunthorpe) - Remove redundant valid PFF number count (Wesley Sheng) - Avoid unnecessary CSR read in ISR (Wesley Sheng) - Rename Gen3-specific constants (Logan Gunthorpe) - Rework infrastructure to support Gen3- and Gen4-specific code (Logan Gunthorpe) - Add Gen4 system info register support (Logan Gunthorpe) - Add Gen4 flash information interface support (Kelvin Cao) - Add Gen4 MRPC GAS access permission check (Kelvin Cao) * pci/switchtec: PCI/switchtec: Add Gen4 device IDs PCI/switchtec: Add Gen4 MRPC GAS access permission check PCI/switchtec: Add Gen4 flash information interface support PCI/switchtec: Add Gen4 system info register support PCI/switchtec: Separate Gen3 register structures into unions PCI/switchtec: Factor out Gen3 ioctl_flash_part_info() PCI/switchtec: Add 'generation' variable PCI/switchtec: Rename generation-specific constants PCI/switchtec: Move check event ID from mask_event() to switchtec_event_isr() PCI/switchtec: Remove redundant valid PFF number count PCI/switchtec: Add support for Intercomm Notify and Upstream Error Containment PCI/switchtec: Fix vep_vector_number ioread width PCI/switchtec: Use dma_set_mask_and_coherent()
2020-01-29Merge branch 'pci/resource'Bjorn Helgaas
- Clear only bridge windows (not BARs) while assigning bus resources (Logan Gunthorpe) - Improve resource assignment for deep hotplug hierarchies, e.g., Thunderbolt (Nicholas Johnson) * pci/resource: PCI: Allow adjust_bridge_window() to shrink resource if necessary PCI: Set resource size directly in adjust_bridge_window() PCI: Rename extend_bridge_window() to adjust_bridge_window() PCI: Rename extend_bridge_window() parameter PCI: Consider alignment of hot-added bridges when assigning resources PCI: Remove local variable usage in pci_bus_distribute_available_resources() PCI: Pass size + alignment to pci_bus_distribute_available_resources() PCI: Rename variables PCI: Remove unnecessary braces PCI: Don't disable bridge BARs when assigning bus resources
2020-01-29Merge branch 'pci/pm'Bjorn Helgaas
- Print config space before suspend for debugging (Chen Yu) * pci/pm: PCI/PM: Print config space of devices before suspend
2020-01-29Merge branch 'pci/p2pdma'Bjorn Helgaas
- Add Intel SkyLake-E to the whitelist of host bridges that support peer-to-peer DMA (Armen Baloyan) * pci/p2pdma: PCI/P2PDMA: Add Intel SkyLake-E to the whitelist
2020-01-29Merge branch 'pci/misc'Bjorn Helgaas
- Fix Broadcom iProc quirk so it's applied regardless of whether the iproc driver is built-in or a module (Wei Liu) - Add extra delay when resuming AMD Ryzen5/7 XHCI controllers from D3hot so they work after resume from runtime suspend or suspend-to-idle (Daniel Drake) - Fix pci_alloc_irq_vectors() function name typo in docs (Zenghui Yu) * pci/misc: Documentation: PCI: Fix pci_alloc_irq_vectors() function name typo PCI: Increase D3 delay for AMD Ryzen5/7 XHCI controllers PCI: Add generic quirk for increasing D3hot delay PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-in
2020-01-29PCI: Allow adjust_bridge_window() to shrink resource if necessaryNicholas Johnson
Remove checks for resource size in adjust_bridge_window(). This is necessary to allow pci_bus_distribute_available_resources() to function when the kernel parameter "pci=hpmemsize=nn[KMG]" is used to allocate resources. Because the kernel parameter sets the size of all hotplug bridges to be the same, there are problems when nested hotplug bridges are encountered. Fitting a downstream hotplug bridge with size X and normal bridges with non-zero size Y into parent hotplug bridge with size X is impossible, and hence the downstream hotplug bridge needs to shrink to fit into its parent. Add check for if bridge is extended or shrunken and reflect that in the call to pci_dbg(). Reset the resource if its new size is zero (if we have run out of a bridge window resource) to prevent the PCI resource assignment code from attempting to assign a zero-sized resource. Link: https://lore.kernel.org/r/PSXP216MB0438D3E2CFE64EBAA32AF691803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-29PCI: Set resource size directly in adjust_bridge_window()Nicholas Johnson
Change adjust_bridge_window() to set resource size directly instead of using additional resource lists. Because additional resource lists are optional resources, any algorithm that requires guaranteed allocation that uses them cannot be guaranteed to work. Remove the resource from add_list, as a zero-sized additional resource is redundant. Update comment in pci_bus_distribute_available_resources() to reflect the above changes. Link: https://lore.kernel.org/r/PSXP216MB04386BA48874B56BC5CB0292803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-29PCI: Rename extend_bridge_window() to adjust_bridge_window()Nicholas Johnson
Rename extend_bridge_window() to adjust_bridge_window() to prepare for the fact that the window will be able to shrink. No functional change intended. Link: https://lore.kernel.org/r/PSXP216MB0438C47B3473D0C9DE531F18803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-29PCI: Rename extend_bridge_window() parameterNicholas Johnson
In extend_bridge_window(), change "available" parameter name to "new_size". This makes more sense as this parameter represents the new size for the window. No functional change intended. Link: https://lore.kernel.org/r/PSXP216MB043853617ECA4118C472A417803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-29PCI: Consider alignment of hot-added bridges when assigning resourcesNicholas Johnson
Change pci_bus_distribute_available_resources() to better handle bridges with different resource alignment requirements. The arguments io, mmio and mmio_pref represent the start and end addresses of resource, into which we must fit the current bridge window. The steps taken by pci_bus_distribute_available_resources(): - For io, mmio and mmio_pref, increase .start to align with the alignment of the current bridge window (otherwise the current bridge window may not fit within the available range). - For io, mmio and mmio_pref, adjust the current bridge window to the size after the above. - Count the number of hotplug bridges and normal bridges on this bus. - If the total number of bridges is one, give that bridge all of the resources and return. - If there are no hotplug bridges, return. - For io, mmio and mmio_pref, increase .start by the amount required for each bridge resource on the bus for non hotplug bridges, giving extra room to make up for alignment of those resources. - For io, mmio and mmio_pref, calculate the resource size per hotplug bridge which is available after the previous steps. - For io, mmio and mmio_pref, distribute the resources to each hotplug bridge, with the sizes calculated above. The motivation for fixing this is enabling devices that require greater than 1MB alignment. This fixes the case where the user hot-adds devices with BAR alignment >1MB and Linux fails to assign resources to it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199581 Link: https://lore.kernel.org/r/PSXP216MB0438C2BFD0FD3691ED9C83F4803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-29PCI: Remove local variable usage in pci_bus_distribute_available_resources()Nicholas Johnson
In pci_bus_distribute_available_resources(), use resource_size() rather than the local available_io, etc. No functional change intended; this just makes the preceding patch smaller. [bhelgaas: extracted from https://lore.kernel.org/r/PSXP216MB0438587C47CBEDF365B1EA27803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM] Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-29PCI: Pass size + alignment to pci_bus_distribute_available_resources()Nicholas Johnson
Change pci_bus_distribute_available_resources() arguments from resource_size_t to struct resource to add more information required to get the alignment correct for bridge windows with alignment >1M. We require (size, alignment), instead of just (size) which is what is currently available. The change from resource_size_t to struct resource does just that. Note that the struct resource arguments are passed by value and not by reference. We do not want to pass by reference and change the resource size of the parent bridge window. We only want the size information. No functional change intended. Link: https://lore.kernel.org/r/PSXP216MB0438587C47CBEDF365B1EA27803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM [bhelgaas: split parts to other patches to reduce the size of this one] Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-29PCI: Rename variablesNicholas Johnson
In pci_bus_distribute_available_resources(), rename: io => io_per_hp mmio => mmio_per_hp mmio_pref => mmio_pref_per_hp No functional change; this is just to make a subsequent patch smaller. [bhelgaas: extracted from https://lore.kernel.org/r/PSXP216MB0438587C47CBEDF365B1EA27803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM] Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-29PCI: vmd: Add two VMD Device IDsSushma Kalakota
Add new VMD device IDs that require the bus restriction mode. Signed-off-by: Sushma Kalakota <sushmax.kalakota@intel.com> Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-29PCI: Remove unnecessary bracesNicholas Johnson
Remove unnecessary braces in pci_bus_distribute_available_resources(). No functional changes. Link: https://lore.kernel.org/r/PSXP216MB0438061CB4442460BB92A75F803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-01-28PCI: brcmstb: Add MSI supportJim Quinlan
This adds MSI support to the Broadcom STB PCIe host controller. The MSI controller is physically located within the PCIe block, however, there is no reason why the MSI controller could not be moved elsewhere in the future. MSIX is not supported by the HW. Since the internal Brcmstb MSI controller is intertwined with the PCIe controller, it is not its own platform device but rather part of the PCIe platform device. Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Andrew Murray <andrew.murray@arm.com>
2020-01-28PCI: brcmstb: Add Broadcom STB PCIe host controller driverJim Quinlan
This adds a basic driver for Broadcom's STB PCIe controller, for now aimed at Raspberry Pi 4's SoC, bcm2711. Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> [lorenzo.pieralisi@arm.com: updated brcm_pcie_get_rc_bar2_size_and_offset()according to https://lore.kernel.org/linux-pci/be8ddb33a7360af1815cf686f77f3f0913d02be3.camel@suse.de] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Andrew Murray <andrew.murray@arm.com> Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
2020-01-27Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-24PCI: vmd: Remove dma_map_ops overridesJon Derrick
Devices on the VMD domain use the VMD endpoint's requester ID and have been relying on the VMD endpoint's DMA operations. The problem with this was that VMD domain devices would use the VMD endpoint's attributes when doing DMA and IOMMU mapping. We can be smarter about this by only using the VMD endpoint when mapping and providing the correct child device's attributes during DMA operations. Remove the dma_map_ops redirect. Link: https://lore.kernel.org/r/1579613871-301529-7-git-send-email-jonathan.derrick@intel.com Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2020-01-24PCI: Introduce pci_real_dma_dev()Jon Derrick
The current DMA alias implementation requires the aliased device be on the same PCI bus as the requester ID. Add an arch-specific mechanism to point to another PCI device when doing mapping and PCI DMA alias search. The default case returns the actual device. Link: https://lore.kernel.org/r/1579613871-301529-4-git-send-email-jonathan.derrick@intel.com Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Christoph Hellwig <hch@lst.de>
2020-01-24x86/PCI: Expose VMD's pci_dev in struct pci_sysdataJon Derrick
Expose VMD's pci_dev pointer in struct pci_sysdata. This will be used indirectly by intel-iommu.c to find the correct domain. Link: https://lore.kernel.org/r/1579613871-301529-3-git-send-email-jonathan.derrick@intel.com [bhelgaas: commit log] Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Christoph Hellwig <hch@lst.de>
2020-01-23PCI/AER: Initialize aer_fifoDongdong Liu
Previously we did not call INIT_KFIFO() for aer_fifo. This leads to kfifo_put() sometimes returning 0 (queue full) when in fact it is not. It is easy to reproduce the problem by using aer-inject: $ aer-inject -s :82:00.0 multiple-corr-nonfatal The content of the multiple-corr-nonfatal file is as below: AER COR RCVR HL 0 1 2 3 AER UNCOR POISON_TLP HL 4 5 6 7 Fixes: 27c1ce8bbed7 ("PCI/AER: Use kfifo for tracking events instead of reimplementing it") Link: https://lore.kernel.org/r/1579767991-103898-1-git-send-email-liudongdong3@huawei.com Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-23PCI/AER: Factor message prefixes with dev_fmt()Bjorn Helgaas
Define dev_fmt() with the common prefix of log messages so we don't have to repeat it in every printk. No functional change intended. Link: https://lore.kernel.org/r/20191213225709.GA213811@google.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-23PCI/AER: Log which device prevents error recoveryYicong Yang
PCI error recovery will fail if any device under the Root Port doesn't have an error_detected callback. Currently only the failure result is printed, which is not enough to identify the driver that lacks the callback. Log a message to identify the device with no error_detected callback. [bhelgaas: tweak log message] Link: https://lore.kernel.org/r/1576237474-32021-1-git-send-email-yangyicong@hisilicon.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-23pci/hotplug/pnv-php: Wrap warnings in macroFrederic Barrat
An opencapi slot doesn't have an associated bridge device. It's not needed for operation, but any warning is displayed through pci_warn() which uses the pci_dev struct of the assocated bridge device. So wrap those warning so that a different trace mechanism can be used if it's an opencapi slot. Reviewed-by: Alastair D'Silva <alastair@d-silva.org> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191121134918.7155-11-fbarrat@linux.ibm.com
2020-01-23pci/hotplug/pnv-php: Relax check when disabling slotFrederic Barrat
The driver only allows to disable a slot in the POPULATED state. However, if an error occurs while enabling the slot, say because the link couldn't be trained, then the POPULATED state may not be reached, yet the power state of the slot is on. So allow to disable a slot in the REGISTERED state. Removing the devices will do nothing since it's not populated, and we'll set the power state of the slot back to off. Reviewed-by: Alastair D'Silva <alastair@d-silva.org> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191121134918.7155-10-fbarrat@linux.ibm.com
2020-01-23pci/hotplug/pnv-php: Register opencapi slotsFrederic Barrat
Add the opencapi PHBs to the list of PHBs being scanned to look for slots. Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191121134918.7155-9-fbarrat@linux.ibm.com
2020-01-23pci/hotplug/pnv-php: Improve error msg on power state change failureFrederic Barrat
When changing the slot state, if opal hits an error and tells as such in the asynchronous reply, the warning "Wrong msg" is logged, which is rather confusing. Instead we can reuse the better message which is already used when we couldn't submit the asynchronous opal request initially. Reviewed-by: Alastair D'Silva <alastair@d-silva.org> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191121134918.7155-8-fbarrat@linux.ibm.com
2020-01-23pci/hotplug/pnv-php: Remove erroneous warningFrederic Barrat
On powernv, when removing a device through hotplug, the following warning is logged: Invalid refcount <.> on <...> It may be incorrect, the refcount may be set to a higher value than 1 and be valid. of_detach_node() can drop more than one reference. As it doesn't seem trivial to assert the correct value, let's remove the warning. Reviewed-by: Alastair D'Silva <alastair@d-silva.org> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191121134918.7155-7-fbarrat@linux.ibm.com
2020-01-21PCI: keystone: Fix error handling when "num-viewport" DT property is not ↵Kishon Vijay Abraham I
populated Fix error handling when "num-viewport" DT property is not populated. Fixes: 23284ad677a9 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: stable@vger.kernel.org # v5.2+
2020-01-15PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as brokenAlex Deucher
To account for parts of the chip that are "harvested" (disabled) due to silicon flaws, caches on some AMD GPUs must be initialized before ATS is enabled. ATS is normally enabled by the IOMMU driver before the GPU driver loads, so this cache initialization would have to be done in a quirk, but that's too complex to be practical. For Navi14 (device ID 0x7340), this initialization is done by the VBIOS, but apparently some boards went to production with an older VBIOS that doesn't do it. Disable ATS for those boards. Link: https://lore.kernel.org/r/20200114205523.1054271-3-alexander.deucher@amd.com Bug: https://gitlab.freedesktop.org/drm/amd/issues/1015 See-also: d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken") See-also: 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken") [bhelgaas: squash into one patch, simplify slightly, commit log] Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2020-01-15PCI/switchtec: Add Gen4 device IDsKelvin Cao
Now that Gen4 is properly supported, advertise support in the module's device ID table and add the same IDs to the list of switchtec quirks. [logang@deltatee.com: add commit message and quirk IDs] Link: https://lore.kernel.org/r/20200115035648.2578-8-logang@deltatee.com Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-01-15PCI/switchtec: Add Gen4 MRPC GAS access permission checkKelvin Cao
Gen4 hardware provides new MRPC commands to read and write directly from any address in the PCI BAR (which Microsemi refers to as GAS). Since accessing BARs can be dangerous and break the driver, we don't want unprivileged users to have this ability. Therefore, require CAP_SYS_ADMIN for the local and remote GAS access MRPC commands. Privileged processes will already have access to the BAR through the sysfs resource file so this doesn't give userspace any capabilities it didn't already have. [logang@deltatee.com: rework commit message] Link: https://lore.kernel.org/r/20200106190337.2428-11-logang@deltatee.com Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>