| Age | Commit message (Collapse) | Author |
|---|
|
A100 features an updated DPHY, which moves PLL control inside the DPHY
register space (previously the PLL was controlled from the CCU). It also
requires a modified analog power-on sequence. This "combo PHY" can also
be used as an LVDS PHY, but that is not yet supported by the driver.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221114022113.31694-9-samuel@sholland.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The A100 variant uses the same values for the timing registers, and it
uses the same final power-on sequence, but it needs a different analog
register configuration in the middle. Support this by moving the
variant-specific parts to a hook provided by the variant.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221114022113.31694-8-samuel@sholland.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The A100 variant of the DPHY requires configuring the analog registers
before setting the global enable bit. Since this order also works on the
other variants, always use it, to minimize the differences between them.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221114022113.31694-7-samuel@sholland.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
While all variants of the DPHY likely support RX mode, the new variant
in the A100 is not used in this direction by the BSP, and it has some
analog register changes, so its RX power-on sequence is unknown. To be
safe, limit RX support to variants where the power-on sequence is known.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221114022113.31694-6-samuel@sholland.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Allwinner A31 D-PHY supports both Rx and Tx modes. While the latter
is already supported and used for MIPI DSI this adds support for the
former, to be used with MIPI CSI-2.
This implementation is inspired by Allwinner's V3s Linux SDK
implementation, which was used as a documentation base.
It uses the direction dt property to distinguish between tx and rx
directions.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://lore.kernel.org/r/20220415152138.635525-3-paul.kocialkowski@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use devm_platform_ioremap_resource(_byname) to simplify code
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1604642930-29019-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
sun6i_dphy_ops and sun6i_dphy_regmap_config are not modified so make them
const structs to allow the compiler to put them in read-only memory.
Before:
text data bss dec hex filename
4407 1944 64 6415 190f drivers/phy/allwinner/phy-sun6i-mipi-dphy.o
After:
text data bss dec hex filename
4835 1496 64 6395 18fb drivers/phy/allwinner/phy-sun6i-mipi-dphy.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200629195727.9717-1-rikard.falkeborn@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Now that our MIPI D-PHY driver has been converted to the phy framework,
let's move it into the drivers/phy directory.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2447609da5b80f148c79b2b2a263a0e779f3e82f.1548085432.git-series.maxime.ripard@bootlin.com
|
