summaryrefslogtreecommitdiff
path: root/drivers/phy/allwinner
AgeCommit message (Collapse)Author
2020-03-04phy: allwinner: Fix GENMASK misuseRikard Falkeborn
Arguments are supposed to be ordered high then low. Fixes: a228890f9458 ("phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC") Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Tested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Ondrej Jirman <megous@megous.com> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191110124355.1569-1-rikard.falkeborn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-06phy: Enable compile testing for some of driversKrzysztof Kozlowski
Some of the phy drivers can be compile tested to increase build coverage. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200103164710.4829-2-krzk@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-31phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoCIcenowy Zheng
Allwinner H6 SoC contains a USB3 PHY (with USB2 DP/DM lines also controlled). Add a driver for it. The register operations in this driver is mainly extracted from the BSP USB3 driver. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25Merge tag 'phy-for-5.1-rc-v2' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into char-misc-next Kishon writes: phy: for 5.1-rc *) Fix sun4i-usb PHY driver to get USB gadget working on H3/R40/V3/V3s *) Fix cable state handling in phy-twl4030-usb driver to get rid of regulator_put() warning *) Fix linker errors and compilation warnings got with randconfig *) Fix sparse warnings and .cocci warnings Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.1-rc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode phy: fix platform_no_drv_owner.cocci warnings phy: mapphone-mdm6600: add gpiolib dependency phy: ti: usb2: fix OMAP_CONTROL_PHY dependency phy: allwinner: allow compile testing phy: qcom-ufs: Make ufs_qcom_phy_disable_iface_clk static phy: rockchip-typec: Make usb3_pll_cfg and dp_pll_cfg static phy: phy-twl4030-usb: Fix cable state handling
2019-04-17phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral modePaul Kocialkowski
On platforms where the MUSB and HCI controllers share PHY0, PHY passby is required when using the HCI controller with the PHY, but it must be disabled when the MUSB controller is used instead. Without this, PHY0 passby is always enabled, which results in broken peripheral mode on such platforms (e.g. H3/H5). Fixes: ba4bdc9e1dc0 ("PHY: sunxi: Add driver for sunxi usb phy") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17phy: allwinner: allow compile testingArnd Bergmann
Some allwinner specific drivers can be built for testing purposes on non-sunxi configurations, which then results in a harmless warning: WARNING: unmet direct dependencies detected for PHY_SUN6I_MIPI_DPHY Depends on [n]: ARCH_SUNXI [=n] && HAS_IOMEM [=y] && OF [=y] && RESET_CONTROLLER [=y] Selected by [y]: - DRM_SUN6I_DSI [=y] && HAS_IOMEM [=y] && DRM_SUN4I [=y] Allow compile-test here as well to avoid the warning, and improve overall build coverage. Fixes: 5d134abf9530 ("phy: Move Allwinner A31 D-PHY driver to drivers/phy/") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-03-26phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYsChen-Yu Tsai
While only the first PHY supports mode switching, the remaining PHYs work in USB host mode. They should support set_mode with mode=USB_HOST instead of failing. This is especially needed now that the USB core does set_mode for all USB ports, which was added in commit b97a31348379 ("usb: core: comply to PHY framework"). Make set_mode with mode=USB_HOST a no-op instead of failing for the non-OTG USB PHYs. Fixes: 6ba43c291961 ("phy-sun4i-usb: Add support for phy_set_mode") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-07phy: Move Allwinner A31 D-PHY driver to drivers/phy/Maxime Ripard
Now that our MIPI D-PHY driver has been converted to the phy framework, let's move it into the drivers/phy directory. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/2447609da5b80f148c79b2b2a263a0e779f3e82f.1548085432.git-series.maxime.ripard@bootlin.com
2018-12-12phy: core: rework phy_set_mode to accept phy mode and submodeGrygorii Strashko
Currently the attempt to add support for Ethernet interface mode PHY (MII/GMII/RGMII) will lead to the necessity of extending enum phy_mode and duplicate there values from phy_interface_t enum (or introduce more PHY callbacks) [1]. Both approaches are ineffective and would lead to fast bloating of enum phy_mode or struct phy_ops in the process of adding more PHYs for different subsystems which will make them unmaintainable. As discussed in [1] the solution could be to introduce dual level PHYs mode configuration - PHY mode and PHY submode. The PHY mode will define generic PHY type (subsystem - PCIE/ETHERNET/USB_) while the PHY submode - subsystem specific interface mode. The last is usually already defined in corresponding subsystem headers (phy_interface_t for Ethernet, enum usb_device_speed for USB). This patch is cumulative change which refactors PHY framework code to support dual level PHYs mode configuration - PHY mode and PHY submode. It extends .set_mode() callback to support additional parameter "int submode" and converts all corresponding PHY drivers to support new .set_mode() callback declaration. The new extended PHY API int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode) is introduced to support dual level PHYs mode configuration and existing phy_set_mode() API is converted to macros, so PHY framework consumers do not need to be changed (~21 matches). [1] http://lkml.kernel.org/r/d63588f6-9ab0-848a-5ad4-8073143bd95d@ti.com Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: sun4i-usb: add support for H6 USB2 PHYIcenowy Zheng
The USB 2.0 PHY on Allwinner H6 SoC is similar to older Allwinner SoCs, with some USB0 quirk like A83T and PHY index 1/2 missing. Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: sun4i-usb: add support for missing USB PHY indexIcenowy Zheng
The new Allwinner H6 SoC's USB2 PHY has two holes -- USB1 (which is a 3.0 port with dedicated PHY) and USB2 (which doesn't exist at all). Add support for this kind of missing USB PHY index. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-12phy: allwinner: sun4i-usb: poll vbus changes on A23/A33 when driving VBUSChen-Yu Tsai
The AXP223 PMIC, like the AXP221, does not generate VBUS change interrupts when N_VBUSEN is used to drive VBUS for the OTG port on the board. This was not noticed until recently, as most A23/A33 boards use a GPIO pin that does not support interrupts for OTG ID detection. This forces the driver to use polling. However the A33-OlinuXino uses a pin that does support interrupts, so the driver uses them. However the VBUS interrupt never fires, and the driver never gets to update the VBUS status. This results in musb timing out waiting for VBUS to rise. This was worked around for the AXP221 by resorting to polling changes in commit 91d96f06a760 ("phy-sun4i-usb: Add workaround for missing Vbus det interrupts on A31"). This patch adds the A23 and A33 to the list of SoCs that need the workaround. Fixes: fc1f45ed3043 ("phy-sun4i-usb: Add support for the usb-phys on the sun8i-a33 SoC") Fixes: 123dfdbcfaf5 ("phy-sun4i-usb: Add support for the usb-phys on the sun8i-a23 SoC") Cc: <stable@vger.kernel.org> # 4.3.x: 68dbc2ce77bb phy-sun4i-usb: Use of_match_node to get model specific config data Cc: <stable@vger.kernel.org> # 4.3.x: 5cf700ac9d50 phy: phy-sun4i-usb: Fix optional gpios failing probe Cc: <stable@vger.kernel.org> # 4.3.x: 04e59a0211ff phy-sun4i-usb: Fix irq free conditions to match request conditions Cc: <stable@vger.kernel.org> # 4.3.x: 91d96f06a760 phy-sun4i-usb: Add workaround for missing Vbus det interrupts on A31 Cc: <stable@vger.kernel.org> # 4.3.x Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-02-21phy: sun4i-usb: add support for R40 USB PHYIcenowy Zheng
Allwinner R40 features a USB PHY like the one in A64, but with 3 PHYs. Add support for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-27Merge tag 'extcon-next-for-4.15' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into usb-next Chanwoo writes: Update extcon for 4.15 Detailed description for this pull request: 1. Split out extcon header file for consumer and provider device : The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device. - include/linux/extcon-provider.h includes API for the provider device driver. - include/linux/extcon.h includes the API for the consumer device driver. 2. Support the SmartDock accessory on extcon-max77843.c device driver - Support the SmartDock accessory which detects following connectors at the same time. : USB host throught USB hub for mouse, keyboard and so on. : MHL connector for video output. : Charger connector for battery charging. - It tested with Unitek Y-2165 MHL+OTG Hub Smart Phone Dock. 3. Fix the minor issue of extcon driver - Delete the unneeded initialization in extcon-max14577. - Make extcon_info static const in order to fix the warning.
2017-10-23phy: sun4i-usb: enable PHY0 dual route for V3s SoCIcenowy Zheng
Allwinner V3s SoC also features the dual route of the first USB PHY. Enable it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-23extcon: Split out extcon header file for consumer and provider deviceChanwoo Choi
The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device, this patch separates into extcon.h and extcon-provider.h. [Description for include/linux/{extcon.h|extcon-provider.h}] - extcon.h includes the extcon API and data structure for extcon consumer device driver. This header file contains the following APIs: : Register/unregister the notifier to catch the change of extcon device : Get the extcon device instance : Get the extcon device name : Get the state of each external connector : Get the property value of each external connector : Get the property capability of each external connector - extcon-provider.h includes the extcon API and data structure for extcon provider device driver. This header file contains the following APIs: : Include 'include/linux/extcon.h' : Allocate the memory for extcon device instance : Register/unregister extcon device : Set the state of each external connector : Set the property value of each external connector : Set the property capability of each external connector Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-08-22phy: sun4i-usb: Support A83T USB PHYsChen-Yu Tsai
The A83T has 3 USB PHYs, 1 for OTG, 1 for standard USB, 1 for USB HSIC. The phy initialization procedure is very different from other SoCs, but the PMU bits are the same, with additional bits for HSIC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-08-22phy: sun4i-usb: Support secondary clock for HSIC PHYChen-Yu Tsai
On the Allwinner A83T SoC, the last USB PHY is an HSIC PHY. It requires two clocks instead of one. On all Allwinner SoCs that share the common USB PHY design supported by the phy-sun4i-usb driver, the first PHY is always tied to OTG, and there is at most one HSIC PHY, typically the last. In this patch we take advantage of these known constraints and store an index in the compatible-string-related config structure describing which PHY is HSIC, needing the extra hsic_12M clock. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-07-21phy: allwinner: phy-sun4i-usb: Add log when probingQuentin Schulz
When phy-sun4i-usb's probing fails, it does not print the reason in kernel log, forcing the developer to edit this driver to add info logs. This commit makes the kernel print the reason of phy-sun4i-usb's probing failure or a success message. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Tested-by: Mylène Josserand <mylene.josserand@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-01phy: Group vendor specific phy driversVivek Gautam
Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>