summaryrefslogtreecommitdiff
path: root/drivers/phy
AgeCommit message (Collapse)Author
2020-10-22Merge tag 'pci-v5.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ...
2020-10-15Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Not a major amount of change, the i915 trees got split into display and gt trees to better facilitate higher level review, and there's a major refactoring of i915 GEM locking to use more core kernel concepts (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards get DC support, nouveau got a bump in displayport support with common code extraction from i915. Outside of drm this contains a couple of patches for hexint moduleparams which you've acked, and a virtio common code tree that you should also get via it's regular path. New driver: - Cadence MHDP8546 DisplayPort bridge driver core: - cross-driver scatterlist cleanups - devm_drm conversions - remove drm_dev_init - devm_drm_dev_alloc conversion ttm: - lots of refactoring and cleanups bridges: - chained bridge support in more drivers panel: - misc new panels scheduler: - cleanup priority levels displayport: - refactor i915 code into helpers for nouveau i915: - split into display and GT trees - WW locking refactoring in GEM - execbuf2 extension mechanism - syncobj timeline support - GEN 12 HOBL display powersaving - Rocket Lake display additions - Disable FBC on Tigerlake - Tigerlake Type-C + DP improvements - Hotplug interrupt refactoring amdgpu: - Sienna Cichlid updates - Navy Flounder updates - DCE6 (SI) support for DC - Plane rotation enabled - TMZ state info ioctl - PCIe DPC recovery support - DC interrupt handling refactor - OLED panel fixes amdkfd: - add SMI events for thermal throttling - SMI interface events ioctl update - process eviction counters radeon: - move to dma_ for allocations - expose sclk via sysfs msm: - DSI support for sm8150/sm8250 - per-process GPU pagetable support - Displayport support mediatek: - move HDMI phy driver to PHY - convert mtk-dpi to bridge API - disable mt2701 tmds tegra: - bridge support exynos: - misc cleanups vc4: - dual display cleanups ast: - cleanups gma500: - conversion to GPIOd API hisilicon: - misc reworks ingenic: - clock handling and format improvements mcde: - DSI support mgag200: - desktop g200 support mxsfb: - i.MX7 + i.MX8M - alpha plane support panfrost: - devfreq support - amlogic SoC support ps8640: - EDID from eDP retrieval tidss: - AM65xx YUV workaround virtio: - virtio-gpu exported resources rcar-du: - R8A7742, R8A774E1 and R8A77961 support - YUV planar format fixes - non-visible plane handling - VSP device reference count fix - Kconfig fix to avoid displaying disabled options in .config" * tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits) drm/ingenic: Fix bad revert drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init drm/amdgpu: Remove warning for virtual_display drm/amdgpu: kfd_initialized can be static drm/amd/pm: setup APU dpm clock table in SMU HW initialization drm/amdgpu: prevent spurious warning drm/amdgpu/swsmu: fix ARC build errors drm/amd/display: Fix OPTC_DATA_FORMAT programming drm/amd/display: Don't allow pstate if no support in blank drm/panfrost: increase readl_relaxed_poll_timeout values MAINTAINERS: Update entry for st7703 driver after the rename Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached" drm/amd/display: HDMI remote sink need mode validation for Linux drm/amd/display: Change to correct unit on audio rate drm/amd/display: Avoid set zero in the requested clk drm/amdgpu: align frag_end to covered address space drm/amdgpu: fix NULL pointer dereference for Renoir drm/vmwgfx: fix regression in thp code due to ttm init refactor. drm/amdgpu/swsmu: add interrupt work handler for smu11 parts drm/amdgpu/swsmu: add interrupt work function ...
2020-10-05Merge 5.9-rc8 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02phy: marvell: comphy: Convert internal SMCC firmware return codes to errnoPali Rohár
Driver ->power_on and ->power_off callbacks leaks internal SMCC firmware return codes to phy caller. This patch converts SMCC error codes to standard linux errno codes. Include file linux/arm-smccc.h already provides defines for SMCC error codes, so use them instead of custom driver defines. Note that return value is signed 32bit, but stored in unsigned long type with zero padding. Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Link: https://lore.kernel.org/r/20200902144344.16684-2-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org>
2020-10-02Merge tag 'phy-for-5.10' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-next Vinod writes: phy for 5.9 - Core: - New PHY attribute for max_link_rate - New phy drivers: - Rockchip dphy driver moved from staging - Socionext UniPhier AHCI PHY driver - Intel LGM SoC USB phy - Intel Keem Bay eMMC PHY driver - Updates: - Support for imx8mp usb phy - Support for DP Phy and USB3+DP combo phy in QMP driver - Support for Qualcomm sc7180 DP phy - Support for cadence torrent PCIe and USB single linke and multilink configurations along with USB, SGMII/QSGMII configurations * tag 'phy-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits) phy: qcom-qmp: initialize the pointer to NULL phy: qcom-qmp: Add support for sc7180 DP phy phy: qcom-qmp: Add support for DP in USB3+DP combo phy phy: qcom-qmp: Use devm_platform_ioremap_resource() to simplify phy: qcom-qmp: Get dp_com I/O resource by index phy: qcom-qmp: Move 'serdes' and 'cfg' into 'struct qcom_phy' phy: qcom-qmp: Remove 'initialized' in favor of 'init_count' phy: qcom-qmp: Move phy mode into struct qmp_phy dt-bindings: phy: qcom,qmp-usb3-dp: Add DP phy information dt-bindings: phy: ti,phy-j721e-wiz: fix bindings for torrent phy dt-bindings: phy: cdns,torrent-phy: add reset-names phy: rockchip-dphy-rx0: Include linux/delay.h phy: fix USB_LGM_PHY warning & build errors phy: cadence-torrent: Add USB + SGMII/QSGMII multilink configuration phy: cadence-torrent: Add PCIe + USB multilink configuration phy: cadence-torrent: Add single link USB register sequences phy: cadence-torrent: Add single link SGMII/QSGMII register sequences phy: cadence-torrent: Configure PHY_PLL_CFG as part of link_cmn_vals phy: cadence-torrent: Add PHY link configuration sequences for single link phy: cadence-torrent: Add clk changes for multilink configuration ...
2020-10-01phy: qcom-qmp: initialize the pointer to NULLVinod Koul
Smatch complains: drivers/phy/qualcomm/phy-qcom-qmp.c:3899 qcom_qmp_phy_probe() error: uninitialized symbol 'dp_cfg'. drivers/phy/qualcomm/phy-qcom-qmp.c:3900 qcom_qmp_phy_probe() error: uninitialized symbol 'dp_serdes'. drivers/phy/qualcomm/phy-qcom-qmp.c:3902 qcom_qmp_phy_probe() error: uninitialized symbol 'usb_cfg'. This is a warning but not a practical one as dp_cfg, dp_serdes and usb_cfg will be set and used when valid. So we can set the pointers to NULL to quiesce the warnings. Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20201001070911.140019-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-29Merge tag 'phy-fixes-2-5.9' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into usb-linus Vinod writes: phy: Second round of fixes for 5.9 *) Fix of leak in TI phy driver * tag 'phy-fixes-2-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: ti: am654: Fix a leak in serdes_am654_probe()
2020-09-29Merge tag 'mediatek-drm-next-5.10' of ↵Dave Airlie
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 5.10 1. Move Mediatek HDMI PHY driver from DRM folder to PHY folder 2. Convert mtk-dpi to drm_bridge API 3. Disable tmds on mt2701 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200914231227.30500-1-chunkuang.hu@kernel.org
2020-09-28phy: qcom-qmp: Add support for sc7180 DP phyStephen Boyd
Add the necessary compatible strings and phy data for the sc7180 USB3+DP combo phy. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Vara Reddy <varar@codeaurora.org> Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20200609034623.10844-1-tanmay@codeaurora.org Link: https://lore.kernel.org/r/20200916231202.3637932-9-swboyd@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-28phy: qcom-qmp: Add support for DP in USB3+DP combo phyStephen Boyd
Add support for the USB3 + DisplayPort (DP) "combo" phy to the qmp phy driver. We already have support for the USB3 part of the combo phy, so most additions are for the DP phy. Split up the qcom_qmp_phy{enable,disable}() functions into the phy init, power on, power off, and exit functions that the common phy framework expects so that the DP phy can add even more phy ops like phy_calibrate() and phy_configure(). This allows us to initialize the DP PHY and configure the AUX channel before powering on the PHY at the link rate that was negotiated during link training. The general design is as follows: 1) DP controller calls phy_init() to initialize the PHY and configure the dp_com register region. 2) DP controller calls phy_configure() to tune the link rate and voltage swing and pre-emphasis settings. 3) DP controller calls phy_power_on() to enable the PLL and power on the phy. 4) DP controller calls phy_configure() again to tune the voltage swing and pre-emphasis settings determind during link training. 5) DP controller calls phy_calibrate() some number of times to change the aux settings if the aux channel times out during link training. 6) DP controller calls phy_power_off() if the link rate is to be changed and goes back to step 2 to try again at a different link rate. 5) DP controller calls phy_power_off() and then phy_exit() to power down the PHY when it is done. The DP PHY contains a PLL that is different from the one used for the USB3 PHY. Instead of a pipe clk there is a link clk and a pixel clk output from the DP PLL after going through various dividers. Introduce clk ops for these two clks that just tell the child clks what the frequency of the pixel and link are. When the phy link rate is configured we call clk_set_rate() to update the child clks in the display clk controller on what rate is in use. The clk frequencies always differ based on the link rate (i.e. 1.6Gb/s 2.7Gb/s, 5.4Gb/s, or 8.1Gb/s corresponding to various transmission modes like HBR1, HBR2 or HBR3) so we simply store the link rate and use that to calculate the clk frequencies. The PLL enable sequence is a little different from other QMP phy PLLs so we power on the PLL in qcom_qmp_phy_configure_dp_phy() that gets called from phy_power_on(). This should probably be split out better so that each phy has a way to run the final PLL/PHY enable sequence. This code is based on a submission of this phy and PLL in the drm subsystem. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Vara Reddy <varar@codeaurora.org> Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20200609034623.10844-1-tanmay@codeaurora.org Link: https://lore.kernel.org/r/20200916231202.3637932-8-swboyd@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-28phy: qcom-qmp: Use devm_platform_ioremap_resource() to simplifyStephen Boyd
We can use the wrapper API here to save some lines and remove the need for the 'base' and 'res' local variable. Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Vara Reddy <varar@codeaurora.org> Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20200916231202.3637932-7-swboyd@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-28phy: qcom-qmp: Get dp_com I/O resource by indexStephen Boyd
The dp_com resource is always at index 1 according to the dts files in the kernel. Get this resource by index so that we don't need to make future additions to the DT binding use 'reg-names'. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Vara Reddy <varar@codeaurora.org> Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20200916231202.3637932-6-swboyd@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-28phy: qcom-qmp: Move 'serdes' and 'cfg' into 'struct qcom_phy'Stephen Boyd
The serdes I/O region is where the PLL for the phy is controlled. Sometimes the PLL is shared between multiple phys, for example in the PCIe case where there are three phys inside the same wrapper. Other times the PLL is for a single phy, i.e. some USB3 phys. To complete the trifecta we have the USB3+DP combo phy where the USB3 and DP phys each have their own serdes region because they have their own PLL while they both share a common I/O region pertaining to the USB type-c pinout and cable orientation. Let's move the serdes iomem pointer into 'struct qmp_phy' so that we can correlate PLL control to the phy that uses it. This allows us to support the USB3+DP combo phy in this driver. This isn't a problem for the 3-lane/phy PCIe phy because there is a common init function that is the only place the serdes region is programmed. Furthermore, move the configuration data that contains most of the register programming sequences to the qmp phy struct. This data isn't qmp wrapper specific. It is phy specific data used to tune various settings for things like pre-emphasis, bias, etc. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Vara Reddy <varar@codeaurora.org> Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20200916231202.3637932-5-swboyd@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-28phy: qcom-qmp: Remove 'initialized' in favor of 'init_count'Stephen Boyd
We already track if any phy inside the qmp wrapper has been initialized by means of the struct qcom_qmp::init_count member. Let's drop the duplicate 'initialized' member to simplify the code a bit. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Vara Reddy <varar@codeaurora.org> Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20200916231202.3637932-4-swboyd@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-28phy: qcom-qmp: Move phy mode into struct qmp_phyStephen Boyd
The phy mode pertains to the phy itself, i.e. 'struct qmp_phy', not the wrapper, i.e. 'struct qcom_qmp'. Move the phy mode into the phy structure to more accurately reflect what is going on. This also cleans up 'struct qcom_qmp' so that it can eventually be the place where qmp wrapper wide data is located, paving the way for the USB3+DP combo phy. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Vara Reddy <varar@codeaurora.org> Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Jonathan Marek <jonathan@marek.ca> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Rob Clark <robdclark@chromium.org> Link: https://lore.kernel.org/r/20200916231202.3637932-3-swboyd@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-22phy: rockchip-dphy-rx0: Include linux/delay.hTomasz Figa
Fix an implicit declaration of usleep_range(): drivers/phy/rockchip/phy-rockchip-dphy-rx0.c: In function 'rk_dphy_enable': drivers/phy/rockchip/phy-rockchip-dphy-rx0.c:203:2: error: implicit declaration of function 'usleep_range' [-Werror=implicit-function-declaration] Fixes: 32abcc4491c62 ("media: staging: phy-rockchip-dphy-rx0: add Rockchip MIPI Synopsys DPHY RX0 driver") Signed-off-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20200921225618.52529-1-tfiga@chromium.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-22phy: fix USB_LGM_PHY warning & build errorsRandy Dunlap
Fix a Kconfig warning that is causing lots of build errors when USB_SUPPORT is not set. USB_PHY depends on USB_SUPPORT but "select" doesn't care about dependencies, so this driver should also depend on USB_SUPPORT. It should not select USB_SUPPORT. WARNING: unmet direct dependencies detected for USB_PHY Depends on [n]: USB_SUPPORT [=n] Selected by [m]: - USB_LGM_PHY [=m] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Li Yin <yin1.li@intel.com> Cc: Vadivel Murugan R <vadivel.muruganx.ramuthevar@linux.intel.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/d1dd0ddd-3143-5777-1c63-195e1a32f237@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18Merge tag 'phy-attrs-5.10' of ↵Tomi Valkeinen
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into 5.10/dp-pull New phy attributes slated for kernel release v5.10. These are needed by the Cadence MHDP driver.
2020-09-18phy: cadence-torrent: Add USB + SGMII/QSGMII multilink configurationSwapnil Jakhade
Add USB + SGMII/QSGMII multilink configuration sequences. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600327846-9733-14-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18phy: cadence-torrent: Add PCIe + USB multilink configurationSwapnil Jakhade
Add PCIe + USB Unique SSC multilink configuration sequences. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600327846-9733-13-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18phy: cadence-torrent: Add single link USB register sequencesSwapnil Jakhade
Add support for single link USB configuration. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600327846-9733-12-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18phy: cadence-torrent: Add single link SGMII/QSGMII register sequencesSwapnil Jakhade
Add support for single link SGMII/QSGMII configuration. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600327846-9733-11-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18phy: cadence-torrent: Configure PHY_PLL_CFG as part of link_cmn_valsSwapnil Jakhade
Include PHY_PLL_CFG as a first register value to configure in link_cmn_vals array values. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600327846-9733-10-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18phy: cadence-torrent: Add PHY link configuration sequences for single linkSwapnil Jakhade
Add support to configure link_cmn_vals and xcvr_diag_vals in case of single link PHY configuration. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600327846-9733-9-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18phy: cadence-torrent: Add clk changes for multilink configurationSwapnil Jakhade
Prepare and enable clock in probe instead of phy_init. Also, remove phy_exit callback. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600327846-9733-8-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18phy: cadence-torrent: Update PHY reset for multilink configurationSwapnil Jakhade
For multilink configuration, deassert PHY and link reset after PHY registers are configured in probe and only check link status in power_on callback. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600327846-9733-7-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18phy: cadence-torrent: Add support for PHY multilink configurationSwapnil Jakhade
Added support for multilink configuration of Torrent PHY. Currently, maximum two links are supported. In case of multilink configuration, PHY needs to be configured for both the protocols simultaneously at the beginning as per the requirement of Torrent PHY. Also, register sequences for PCIe + SGMII/QSGMII Unique SSC PHY multilink configurations are added. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600327846-9733-6-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18phy: cadence-torrent: Add PHY APB reset supportSwapnil Jakhade
Add support for PHY APB reset and make it optional. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600327846-9733-4-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18phy: cadence-torrent: Check cmn_ready assertion during PHY power onSwapnil Jakhade
Check if cmn_ready is set after both PLL0 and PLL1 are locked. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600327846-9733-3-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18phy: cadence-torrent: Add single link PCIe supportSwapnil Jakhade
Add single link PCIe register sequences in Torrent PHY driver. Also, add support for getting SSC type from DT. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600327846-9733-2-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18phy: cadence-torrent: Check total lane count for all subnodes is within limitSwapnil Jakhade
Add checking if total number of lanes for all subnodes is not greater than number of lanes supported by PHY. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600280911-9214-6-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18phy: cadence-torrent: Add separate regmap functions for torrent and DPSwapnil Jakhade
Added separate functions for regmap initialization of torrent PHY generic registers and DP specific registers. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600280911-9214-5-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18phy: cadence-torrent: Enable support for multiple subnodesSwapnil Jakhade
Enable support for multiple subnodes in torrent PHY to include multi-link combinations. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600280911-9214-4-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18phy: cadence-torrent: Use devm_platform_ioremap_resource() to get reg addressesSwapnil Jakhade
Use devm_platform_ioremap_resource() to get register addresses instead of boilerplate code. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600280911-9214-3-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-18phy: cadence-torrent: Use of_device_get_match_data() to get driver dataSwapnil Jakhade
Use of_device_get_match_data() to get driver data instead of boilerplate code. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Link: https://lore.kernel.org/r/1600280911-9214-2-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-16phy: intel: Add Keem Bay eMMC PHY supportWan Ahmad Zainie
Add support for eMMC PHY on Intel Keem Bay SoC. Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200913235522.4316-4-wan.ahmad.zainie.wan.mohamad@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-16phy: intel: Rename phy-intel to phy-intel-lgmWan Ahmad Zainie
Rename phy-intel-{combo,emmc}.c to phy-intel-lgm-{combo,emmc}.c to make drivers/phy/intel directory more generic for future use. Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Reviewed-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> Link: https://lore.kernel.org/r/20200913235522.4316-2-wan.ahmad.zainie.wan.mohamad@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-16phy: cadence: torrent: Constify regmap_config structsRikard Falkeborn
The regmap_config structs are never modified and can be made const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200912204639.501669-4-rikard.falkeborn@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-16phy: cadence: salvo: Constify cdns_nxp_sequence_pairRikard Falkeborn
cdns_nxp_sequence_pair[] are never modified and can be made const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200912204639.501669-3-rikard.falkeborn@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-16phy: cadence: Sierra: Constify static structsRikard Falkeborn
The static cdns_reg_pairs and regmap_config structs are not modified and can be made const. This allows the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200912204639.501669-2-rikard.falkeborn@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-16Merge branch 'topic/phy_attrs' into nextVinod Koul
2020-09-16phy: cadence-torrent: Set Torrent PHY attributesSwapnil Jakhade
Set Torrent PHY attributes bus_width, max_link_rate and mode for DisplayPort. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/1599805114-22063-3-git-send-email-sjakhade@cadence.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-14drm/mediatek: Disable tmds on mt2701chunhui dai
Without that patch if you use specific resolutions like 1280x1024, I can see distortion in the output. It seems as if the frequency for updating the pixel of the image is out of sync. For initialization tmds needs to be active, but can be disabled after init to fix blurry display Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2020-09-11phy: Add USB3 PHY support for Intel LGM SoCRamuthevar Vadivel Murugan
Add support for USB PHY on Intel LGM SoC. Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20200828022312.52724-3-vadivel.muruganx.ramuthevar@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-08phy: ti: am654: Fix a leak in serdes_am654_probe()Dan Carpenter
If devm_phy_create() fails then we need to call of_clk_del_provider(node) to undo the call to of_clk_add_provider(). Fixes: 71e2f5c5c224 ("phy: ti: Add a new SERDES driver for TI's AM654x SoC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200905124648.GA183976@mwanda Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-08phy: ti: gmii-sel: retrieve ports number and base offset from dtGrygorii Strashko
On K3 AM654x/J721E platforms the Port MII mode selection register(s) have similar format and placed in the System Control Module (SCM) module sequentially as one register per port, but, depending SOC and CPSW instance, the base offset and number of ports can be different. Hence, add possibility to retrieve number of ports and base registers offset from DT and support for max possible number of ports supported by K3 SoCs like J721E. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20200828201943.29155-4-grygorii.strashko@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-08phy: ti: gmii-sel: use features mask during initGrygorii Strashko
Use features mask during PHYs initialization to simplify code. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20200828201943.29155-3-grygorii.strashko@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-08phy: ti: gmii-sel: move phy init in separate functionGrygorii Strashko
Move phy initialization in separate function to improve code readability and simplify future changes. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20200828201943.29155-2-grygorii.strashko@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-08phy: phy-pxa-28nm-usb2: convert to readl_poll_timeout()Chunfeng Yun
Use readl_poll_timeout() to simplify code Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1598320987-25518-6-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-09-08phy: phy-pxa-28nm-hsic: convert to readl_poll_timeout()Chunfeng Yun
Use readl_poll_timeout() to simplify code Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1598320987-25518-5-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>