summaryrefslogtreecommitdiff
path: root/drivers/phy
AgeCommit message (Collapse)Author
2020-04-30phy: qualcomm: usb-hs-28nm: Prepare clocks in initBjorn Andersson
The AHB clock must be on for qcom_snps_hsphy_init() to be able to write the initialization sequence to the hardware, so move the clock enablement to phy init and exit. Fixes: 67b27dbeac4d ("phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-04-27phy: qcom-qusb2: Re add "qcom,sdm845-qusb2-phy" compat stringJohn Stultz
This patch fixes a regression in 5.7-rc1+ In commit 8fe75cd4cddf ("phy: qcom-qusb2: Add generic QUSB2 V2 PHY support"), the change was made to add "qcom,qusb2-v2-phy" as a generic compat string. However the change also removed the "qcom,sdm845-qusb2-phy" compat string, which is documented in the binding and already in use. This patch re-adds the "qcom,sdm845-qusb2-phy" compat string which allows the driver to continue to work with existing dts entries such as found on the db845c. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Manu Gautam <mgautam@codeaurora.org> Cc: Sandeep Maheswaram <sanm@codeaurora.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: 8fe75cd4cddf ("phy: qcom-qusb2: Add generic QUSB2 V2 PHY support") Reported-by: YongQin Liu <yongqin.liu@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-04-24phy: tegra: Select USB_COMMON for usb_get_maximum_speed()Thierry Reding
The usb_get_maximum_speed() function is part of the usb-common module, so enable it by selecting the corresponding Kconfig symbol. While at it, also make sure to depend on USB_SUPPORT because USB_PHY requires that. This can lead to Kconfig conflicts if USB_SUPPORT is not enabled while attempting to enable PHY_TEGRA_XUSB. Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-04-03Merge tag 'pci-v5.7-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg) - Add more 32 GT/s link speed decoding and improve the implementation (Yicong Yang) Resource management: - Add support for sizing programmable host bridge apertures and fix a related alpha Nautilus regression (Ivan Kokshaysky) Interrupts: - Add boot interrupt quirk mechanism for Xeon chipsets and document boot interrupts (Sean V Kelley) PCIe native device hotplug: - When possible, disable in-band presence detect and use PDS (Alexandru Gagniuc) - Add DMI table for devices that don't use in-band presence detection but don't advertise that correctly (Stuart Hayes) - Fix hang when powering slots up/down via sysfs (Lukas Wunner) - Fix an MSI interrupt race (Stuart Hayes) Virtualization: - Add ACS quirks for Zhaoxin devices (Raymond Pang) Error handling: - Add Error Disconnect Recover (EDR) support so firmware can report devices disconnected via DPC and we can try to recover (Kuppuswamy Sathyanarayanan) Peer-to-peer DMA: - Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew Maier) ASPM: - Reduce severity of common clock config message (Chris Packham) - Clear the correct bits when enabling L1 substates, so we don't go to the wrong state (Yicong Yang) Endpoint framework: - Replace EPF linkup ops with notifier call chain and improve locking (Kishon Vijay Abraham I) - Fix concurrent memory allocation in OB address region (Kishon Vijay Abraham I) - Move PF function number assignment to EPC core to support multiple function creation methods (Kishon Vijay Abraham I) - Fix issue with clearing configfs "start" entry (Kunihiko Hayashi) - Fix issue with endpoint MSI-X ignoring BAR Indicator and Table Offset (Kishon Vijay Abraham I) - Add support for testing DMA transfers (Kishon Vijay Abraham I) - Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I) - Add support for tests to clear IRQ (Kishon Vijay Abraham I) - Add common DT schema for endpoint controllers (Kishon Vijay Abraham I) Amlogic Meson PCIe controller driver: - Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi Pommarel) - Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi Pommarel) Cadence PCIe controller driver: - Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Add two VMD Device IDs that require bus restriction mode (Sushma Kalakota) Mobiveil PCIe controller driver: - Refactor and modularize mobiveil driver (Hou Zhiqiang) - Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang) Microsoft Hyper-V host bridge driver: - Add support for Hyper-V PCI protocol version 1.3 and PCI_BUS_RELATIONS2 (Long Li) - Refactor to prepare for virtual PCI on non-x86 architectures (Boqun Feng) - Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Use pci_parse_request_of_pci_ranges() (Rob Herring) - Add support for endpoint mode and related DT updates (Vidya Sagar) - Reduce -EPROBE_DEFER error message log level (Thierry Reding) Qualcomm PCIe controller driver: - Restrict class fixup to specific Qualcomm devices (Bjorn Andersson) Synopsys DesignWare PCIe controller driver: - Refactor core initialization code for endpoint mode (Vidya Sagar) - Fix endpoint MSI-X to use correct table address (Kishon Vijay Abraham I) TI DRA7xx PCIe controller driver: - Fix MSI IRQ handling (Vignesh Raghavendra) TI Keystone PCIe controller driver: - Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I) Miscellaneous: - Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng Feng) - Use ioremap(), not phys_to_virt(), for platform ROM to fix video ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)" * tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits) misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS PCI: tegra: Print -EPROBE_DEFER error message at debug level misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq() misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices tools: PCI: Add 'e' to clear IRQ misc: pci_endpoint_test: Add ioctl to clear IRQ misc: pci_endpoint_test: Avoid using module parameter to determine irqtype PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments misc: pci_endpoint_test: Add support to get DMA option from userspace tools: PCI: Add 'd' command line option to support DMA misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation PCI: endpoint: functions/pci-epf-test: Print throughput information PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data PCI: pciehp: Fix MSI interrupt race PCI: pciehp: Fix indefinite wait on sysfs requests PCI: endpoint: Fix clearing start entry in configfs PCI: tegra: Add support for PCIe endpoint mode in Tegra194 PCI: sysfs: Revert "rescan" file renames ...
2020-03-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Fix the iwlwifi regression, from Johannes Berg. 2) Support BSS coloring and 802.11 encapsulation offloading in hardware, from John Crispin. 3) Fix some potential Spectre issues in qtnfmac, from Sergey Matyukevich. 4) Add TTL decrement action to openvswitch, from Matteo Croce. 5) Allow paralleization through flow_action setup by not taking the RTNL mutex, from Vlad Buslov. 6) A lot of zero-length array to flexible-array conversions, from Gustavo A. R. Silva. 7) Align XDP statistics names across several drivers for consistency, from Lorenzo Bianconi. 8) Add various pieces of infrastructure for offloading conntrack, and make use of it in mlx5 driver, from Paul Blakey. 9) Allow using listening sockets in BPF sockmap, from Jakub Sitnicki. 10) Lots of parallelization improvements during configuration changes in mlxsw driver, from Ido Schimmel. 11) Add support to devlink for generic packet traps, which report packets dropped during ACL processing. And use them in mlxsw driver. From Jiri Pirko. 12) Support bcmgenet on ACPI, from Jeremy Linton. 13) Make BPF compatible with RT, from Thomas Gleixnet, Alexei Starovoitov, and your's truly. 14) Support XDP meta-data in virtio_net, from Yuya Kusakabe. 15) Fix sysfs permissions when network devices change namespaces, from Christian Brauner. 16) Add a flags element to ethtool_ops so that drivers can more simply indicate which coalescing parameters they actually support, and therefore the generic layer can validate the user's ethtool request. Use this in all drivers, from Jakub Kicinski. 17) Offload FIFO qdisc in mlxsw, from Petr Machata. 18) Support UDP sockets in sockmap, from Lorenz Bauer. 19) Fix stretch ACK bugs in several TCP congestion control modules, from Pengcheng Yang. 20) Support virtual functiosn in octeontx2 driver, from Tomasz Duszynski. 21) Add region operations for devlink and use it in ice driver to dump NVM contents, from Jacob Keller. 22) Add support for hw offload of MACSEC, from Antoine Tenart. 23) Add support for BPF programs that can be attached to LSM hooks, from KP Singh. 24) Support for multiple paths, path managers, and counters in MPTCP. From Peter Krystad, Paolo Abeni, Florian Westphal, Davide Caratti, and others. 25) More progress on adding the netlink interface to ethtool, from Michal Kubecek" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2121 commits) net: ipv6: rpl_iptunnel: Fix potential memory leak in rpl_do_srh_inline cxgb4/chcr: nic-tls stats in ethtool net: dsa: fix oops while probing Marvell DSA switches net/bpfilter: remove superfluous testing message net: macb: Fix handling of fixed-link node net: dsa: ksz: Select KSZ protocol tag netdevsim: dev: Fix memory leak in nsim_dev_take_snapshot_write net: stmmac: add EHL 2.5Gbps PCI info and PCI ID net: stmmac: add EHL PSE0 & PSE1 1Gbps PCI info and PCI ID net: stmmac: create dwmac-intel.c to contain all Intel platform net: dsa: bcm_sf2: Support specifying VLAN tag egress rule net: dsa: bcm_sf2: Add support for matching VLAN TCI net: dsa: bcm_sf2: Move writing of CFP_DATA(5) into slicing functions net: dsa: bcm_sf2: Check earlier for FLOW_EXT and FLOW_MAC_EXT net: dsa: bcm_sf2: Disable learning for ASP port net: dsa: b53: Deny enslaving port 7 for 7278 into a bridge net: dsa: b53: Prevent tagged VLAN on port 7 for 7278 net: dsa: b53: Restore VLAN entries upon (re)configuration net: dsa: bcm_sf2: Fix overflow checks hv_netvsc: Remove unnecessary round_up for recv_completion_cnt ...
2020-03-26phy: ti: gmii-sel: simplify config dependencies between net drivers and gmii phyGrygorii Strashko
The phy-gmii-sel can be only auto selected in Kconfig and now the pretty complex Kconfig dependencies are defined for phy-gmii-sel driver, which also need to be updated every time phy-gmii-sel is re-used for any new networking driver. Simplify Kconfig definition for phy-gmii-sel PHY driver - drop all dependencies and from networking drivers and rely on using 'imply PHY_TI_GMII_SEL' in Kconfig definitions for networking drivers instead. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Tested-by: Murali Karicheri <m-karicheri2@ti.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-21Merge tag 'phy-for-5.7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: phy: for 5.7 *) Rename and Re-design phy-cadence-dp driver to phy-cadence-torrent driver *) Add new PHY driver for Qualcomm 28nm Hi-Speed USB PHY *) Add new PHY driver for Qualcomm Super Speed PHY in QCS404 *) Add support for Qualcomm PCIe QMP/QHP PHY in SDM845 to phy-qcom-qmp driver *) Add support for Qualcomm UFS PHY in MSM8996 to phy-qcom-qmp driver *) Add support for an additional reference clock in Mediatek phy-mtk-tphy driver *) Add support for configuring tuning parameters in Mediatek phy-mtk-tphy driver *) Add support for GMII PHY in TI K3 AM654x/J721E SoCs to phy-gmii-sel driver *) Add support for USB2 PHY in Amlogic A1 SoC Family to phy-meson-g12a-usb2 driver *) Add support for USB3/USB2/PCIe PHY in Socionext Pro5 SoC to phy-uniphier-usb3ss/phy-uniphier-usb3hs/phy-uniphier-pcie driver respectively *) Add support for QUSB2 PHY in Qualcomm SC7180 in driver *) Convert dt-bindings of Cadence DP, Qualcomm QUSB2 to YAML format Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (52 commits) phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters phy: qcom-qusb2: Add generic QUSB2 V2 PHY support dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180 dt-bindings: phy: qcom,qusb2: Convert QUSB2 phy bindings to yaml phy: rk-inno-usb2: Decrease verbosity of repeating log. phy: amlogic: Add Amlogic A1 USB2 PHY Driver dt-bindings: phy: Add Amlogic A1 USB2 PHY Bindings phy: ti: gmii-sel: add support for am654x/j721e soc dt-bindings: phy: ti: gmii-sel: add support for am654x/j721e soc phy: qualcomm: usb: Add SuperSpeed PHY driver dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding dt-bindings: phy: remove qcom-dwc3-usb-phy phy: phy-mtk-tphy: add a new reference clock phy: phy-mtk-tphy: remove unused u3phya_ref clock phy: phy-mtk-tphy: make the ref clock optional phy: phy-mtk-tphy: add a property for internal resistance ...
2020-03-20phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHYSandeep Maheswaram
Added support for overriding bias-ctrl-value,charge-ctrl-value and hsdisc-trim-value params for QUSB2 V2 PHY Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHYSandeep Maheswaram
Added new structure for overriding tuning parameters in QUSB2 V2 PHY as the override params are increased due to usage of generic QUSB2 V2 phy table. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: qcom-qusb2: Add generic QUSB2 V2 PHY supportSandeep Maheswaram
Add generic QUSB2 V2 PHY table so the respective phys can use the same table. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: rk-inno-usb2: Decrease verbosity of repeating log.Christoph Muellner
phy-rockchip-inno-usb2 logs the message "phy-ff2c0000.syscon:usb2-phy@100.2: charger = INVALID_CHARGER" constantly with a frequency of about 1 Hz and a verbosity level of INFO. As this is clearly annoying, this patch decreases the log level to DEBUG. Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: amlogic: Add Amlogic A1 USB2 PHY DriverHanjie Lin
This adds support for the USB2 PHY found in the Amlogic A1 SoC Family. It supports host mode only. Signed-off-by: Yue Wang <yue.wang@amlogic.com> Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: ti: gmii-sel: add support for am654x/j721e socGrygorii Strashko
TI AM654x/J721E SoCs have the same PHY interface selection mechanism for CPSWx subsystem as TI SoCs (AM3/4/5/DRA7), but registers and bit-fields placement is different. This patch adds corresponding support for TI AM654x/J721E SoCs PHY interface selection. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: qualcomm: usb: Add SuperSpeed PHY driverJorge Ramirez-Ortiz
Controls Qualcomm's SS PHY 1.0.0 implemented on various SoCs on both the 20nm and 28nm process nodes. Based on Sriharsha Allenki's <sallenki@codeaurora.org> original code. [bod: Removed dependency on extcon. Switched to gpio-usb-conn to handle VBUS On/Off Switched to usb-role-switch to bind gpio-usb-conn to DWC3] Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Cc: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com> Cc: Sriharsha Allenki's <sallenki@codeaurora.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driverShawn Guo
Adds Qualcomm 28nm Hi-Speed USB PHY driver support. This PHY is usually paired with Synopsys DWC3 USB controllers on Qualcomm SoCs. The PHY can come in two flavours femtoPHY or picoPHY. This commit adds support for the femtoPHY with the possibility of extending to the picoPHY with additional future commits. Both PHYs are on a 28 nanometer process node. [bod: Updated qcom_snps_hsphy_set_mode to match new method signature Added disjunct on mode > 0 Removed regulator_set_voltage() in favour of setting floor in dts Removed 'snps' and from driver name Extended commit log to mention femtoPHY and picoPHY for future reference.] Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: phy-mtk-tphy: add a new reference clockChunfeng Yun
Usually the digital and analog phys use the same reference clock, but some platforms have two separate reference clocks for each of them, so add another optional clock to support them. In order to keep the clock names consistent with PHY IP's, change the da_ref for analog phy and ref clock for digital phy. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: phy-mtk-tphy: remove unused u3phya_ref clockChunfeng Yun
The u3phya_ref clock is already moved into sub-node, and renamed as ref clock, no used anymore now, so remove it, this can avoid confusion when support new platforms Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: phy-mtk-tphy: make the ref clock optionalChunfeng Yun
Sometimes the reference clock of USB3 PHY comes from oscillator directly, and no need refer to a fixed-clock in DTS anymore if make it optional. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: phy-mtk-tphy: add a property for internal resistanceChunfeng Yun
This is used to tune J-K voltage by internal R (resistance), the range is [0, 31], the resistance value is about 6.9K ohm for 0, 3.8K ohm for 31, and the step is 1K ohm Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: phy-mtk-tphy: add a property for disconnect thresholdChunfeng Yun
This is used to tune the threshold of disconnect, the index range is [0, 15], the threshold voltage is about 400mV for 0, 700mV for 15, and the step is 20mV. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: amlogic: G12A: Fix misuse of GENMASK macroJoe Perches
Arguments are supposed to be ordered high then low. Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: qcom: qmp: Use power_on/off ops for PCIeBjorn Andersson
The PCIe PHY initialization requires the attached device to be present, which is primarily achieved by the PCI controller driver. So move the logic from init/exit to power_on/power_off. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: uniphier-pcie: Add SoC-dependent phy-mode function supportKunihiko Hayashi
Since this phy is shared by multiple devices including USB and PCIe, it is necessary to determine which device use this phy. This patch adds SoC-dependent functions to determine a device using this phy. When there is 'socionext,syscon' property in the pcie-phy node, the driver calls SoC-dependt function instead of checking .has_syscon in SoC-dependent data. The function configures the system controller to use phy for PCIe. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: uniphier-pcie: Add legacy SoC support for Pro5Kunihiko Hayashi
Add legacy SoC support that needs to manage gio clock and reset and to skip setting unimplemented phy parameters. This supports Pro5. This specifies only 1 port use because Pro5 doesn't set it in the power-on sequence. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: uniphier-usb3hs: Change Rx sync mode to avoid communication failureKunihiko Hayashi
In case of using default parameters, communication failure might occur in rare cases. This sets Rx sync mode parameter to avoid the issue. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: uniphier-usb3hs: Add legacy SoC support for Pro5Kunihiko Hayashi
Add legacy SoC support that needs to manage gio clock and reset. This supports Pro5. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: uniphier-usb3ss: Add Pro5 supportKunihiko Hayashi
Pro5 SoC has same scheme of USB3 ss-phy as Pro4, so the data for Pro5 is equivalent to Pro4. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: socionext: Use devm_platform_ioremap_resource()Kunihiko Hayashi
Use devm_platform_ioremap_resource() to simplify the code. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: qcom-qmp: Add MSM8996 UFS QMP supportBjorn Andersson
The support for the 14nm MSM8996 UFS PHY is currently handled by the UFS-specific 14nm QMP driver, due to the earlier need for additional operations beyond the standard PHY API. Add support for this PHY to the common QMP driver, to allow us to remove the old driver. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Add support for subnode bindingsSwapnil Jakhade
Implement single link subnode support to the phy driver. Add reset support including PHY reset and individual lane reset. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Add platform dependent initialization structureSwapnil Jakhade
Add platform dependent initialization data for Torrent PHY used in TI's J721E SoC. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Use regmap to read and write DPTX PHY registersSwapnil Jakhade
Use regmap to read and write DPTX specific PHY registers. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Use regmap to read and write Torrent PHY registersSwapnil Jakhade
Use regmap for accessing Torrent PHY registers. Modify register offsets as defined in Torrent PHY user guide. Abstract address calculation using regmap APIs. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Implement PHY configure APIsSwapnil Jakhade
Add support for PHY configuration APIs. These will mainly reconfigure link rate, number of lanes, voltage swing and pre-emphasis values. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Add 19.2 MHz reference clock supportSwapnil Jakhade
Add configuration functions for 19.2 MHz refclock support. Add register configurations for SSC support. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Refactor code for reusabilitySwapnil Jakhade
Add a separate function to set different power state values. Use uniform polling timeout value. Also check return values of functions for proper error handling. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Add wrapper for DPTX register accessSwapnil Jakhade
Add wrapper functions to read, write DisplayPort specific PHY registers to improve code readability. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Add wrapper for PHY register accessSwapnil Jakhade
Add a wrapper function to write Torrent PHY registers to improve code readability. Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-torrent: Adopt Torrent nomenclatureSwapnil Jakhade
- Change private data struct cdns_dp_phy to cdns_torrent_phy - Change module description and registration accordingly - Generic torrent functions have prefix cdns_torrent_phy_* - Functions specific to Torrent phy for DisplayPort are prefixed as cdns_torrent_dp_* Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com> Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-20phy: cadence-dp: Rename to phy-cadence-torrentYuti Amonkar
Rename Cadence DP PHY driver from phy-cadence-dp to phy-cadence-torrent to make it more generic for future use. Modifiy Makefile and Kconfig accordingly. Also, change driver compatible from "cdns,dp-phy" to "cdns,torrent-phy".This will not affect ABI as the driver has never been functional, and therefore do not exist in any active use case. Signed-off-by: Yuti Amonkar <yamonkar@cadence.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-03-19phy: tegra: Select USB_PHYCorentin Labbe
I have hit the following build error: armv7a-hardfloat-linux-gnueabi-ld: drivers/phy/tegra/xusb.o: in function `tegra_xusb_port_unregister': xusb.c:(.text+0x2ac): undefined reference to `usb_remove_phy' armv7a-hardfloat-linux-gnueabi-ld: drivers/phy/tegra/xusb.o: in function `tegra_xusb_setup_ports': xusb.c:(.text+0xf30): undefined reference to `usb_add_phy_dev' PHY_TEGRA_XUSB should select USB_PHY because it uses symbols defined in the code enabled by that. Fixes: 23babe30fb45d ("phy: tegra: xusb: Add usb-phy support") Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19phy: tegra: Don't use device-managed API to allocate portsThierry Reding
The device-managed allocation API doesn't work well with the life-cycle of device objects. Since ports have device objects allocated within, it can lead to situations where these devices need to stay around until after their parent pad controller has been unbound from its driver. The device-managed memory allocated for the port objects will, however, get freed when the pad controller unbinds from the driver. This can cause use-after-free errors down the road. Note that the device is deleted as part of the driver unbind operation, so there isn't much that can be done with it after that point, but the memory still needs to stay around to ensure none of the references are invalidated. One situation where this arises is when a VBUS supply is associated with a USB 2 or 3 port. When that supply is released using regulator_put() an SRCU call will queue the release of the device link connecting the port and the regulator after a grace period. This means that the regulator is going to keep on to the last reference of the port device even after the pad controller driver was unbound (which is when the memory backing the port device is freed). Fix this by allocating port objects using non-device-managed memory. Add release callbacks for these objects so that their memory gets freed when the last reference goes away. This decouples the port devices' lifetime from the "active" lifetime of the pad controller (i.e. the time during which the pad controller driver owns the device). Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19phy: tegra: Fix regulator leakThierry Reding
Devices are created for each port of the XUSB pad controller. Each USB 2 and USB 3 port can potentially have an associated VBUS power supply that needs to be removed when the device is removed. Since port devices never bind to a driver, the driver core will not get to perform the cleanup of device-managed resources that usually happens on driver unbind. Now, the driver core will also perform device-managed resource cleanup for driver-less devices when they are released. However, when a device link is created between the regulator and the port device, as part of regulator_get(), the regulator takes a reference to the port device and prevents it from being released unless regulator_put() is called, which will never happen. Avoid this by using the non-device-managed API and manually releasing the regulator reference when the port is unregistered. Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19phy: tegra: Print -EPROBE_DEFER error message at debug levelThierry Reding
Probe deferral is an expected error condition that will usually be recovered from. Print such error messages at debug level to make them available for diagnostic purposes when building with debugging enabled and hide them otherwise to not spam the kernel log with them. Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19phy: tegra: xusb: Don't warn on probe deferJon Hunter
Deferred probe is an expected return value for tegra_fuse_readl(). Given that the driver deals with it properly, there's no need to output a warning that may potentially confuse users. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19phy: tegra: xusb: Add Tegra194 supportJC Kuo
Add support for the XUSB pad controller found on Tegra194 SoCs. It is mostly similar to the same IP found on Tegra186, but the number of pads exposed differs, as do the programming sequences. Because most of the Tegra194 XUSB PADCTL registers definition and programming sequence are the same as Tegra186, Tegra194 XUSB PADCTL can share the same driver, xusb-tegra186.c, with Tegra186 XUSB PADCTL. Tegra194 XUSB PADCTL supports up to USB 3.1 Gen 2 speed, however, it is possible for some platforms have long signal trace that could not provide sufficient electrical environment for Gen 2 speed. This patch adds a "maximum-speed" property to usb3 ports which can be used to specify the maximum supported speed for any particular USB 3.1 port. For a port that is not capable of SuperSpeedPlus, "maximum-speed" property should carry "super-speed". Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19phy: tegra: xusb: Protect Tegra186 soc with configJC Kuo
As xusb-tegra186.c will be reused for Tegra194, it would be good to protect Tegra186 soc data with CONFIG_ARCH_TEGRA_186_SOC. This commit also reshuffles Tegra186 soc data single CONFIG_ARCH_TEGRA_186_SOC will be sufficient. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19phy: tegra: xusb: Add set_mode support for UTMI phy on Tegra186Nagarjuna Kristam
Add support for set_mode on UTMI phy. This allow XUSB host/device mode drivers to configure the hardware to corresponding modes. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19phy: tegra: xusb: Add set_mode support for USB 2 phy on Tegra210Nagarjuna Kristam
Add support for set_mode on USB 2 phy. This allow XUSB host/device mode drivers to configure the hardware to corresponding modes. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19phy: tegra: xusb: Add support to get companion USB 3 portNagarjuna Kristam
Tegra XUSB host, device mode driver requires the USB 3 companion port number for corresponding USB 2 port. Add API to retrieve the same. Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com> Reviewed-by: JC Kuo <jckuo@nvidia.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Thierry Reding <treding@nvidia.com>