summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/intel
AgeCommit message (Collapse)Author
2024-11-25Merge tag 'pinctrl-v6.13-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "No core changes this time. New drivers: - Xlinix Versal pin control driver - Ocelot LAN969x pin control driver - T-Head TH1520 RISC-V SoC pin control driver - Qualcomm SM8750, IPQ5424, QCS8300, SAR2130P and QCS615 SoC pin control drivers - Qualcomm SM8750 LPASS (low power audio subsystem) pin control driver - Qualcomm PM8937 mixsig IC pin control support, GPIO and MPP (multi-purpose-pin) - Samsung Exynos8895 and Exynos9810 SoC pin control driver - SpacemiT K1 SoC pin control driver - Airhoa EN7581 IC pin control driver Improvements: - The Renesas subdriver now supports schmitt-trigger and open drain pin configurations if the hardware supports it - Support GPIOF and GPIOG banks in the Aspeed G6 SoC - Support the DSW community in the Intel Elkhartlake SoC" * tag 'pinctrl-v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits) pinctrl: airoha: Use unsigned long for bit search pinctrl: k210: Undef K210_PC_DEFAULT pinctrl: qcom: spmi: fix debugfs drive strength pinctrl: qcom: Add sm8750 pinctrl driver dt-bindings: pinctrl: qcom: Add sm8750 pinctrl pinctrl: cy8c95x0: remove unneeded goto labels pinctrl: cy8c95x0: embed iterator to the for-loop pinctrl: cy8c95x0: Use temporary variable for struct device pinctrl: cy8c95x0: use flexible sleeping in reset function pinctrl: cy8c95x0: switch to using devm_regulator_get_enable() pinctrl: cy8c95x0: Use 2-argument strscpy() dt-bindings: pinctrl: sx150xq: allow gpio line naming pinctrl: single: add marvell,pxa1908-padconf compatible dt-bindings: pinctrl: pinctrl-single: add marvell,pxa1908-padconf compatible dt-bindings: pinctrl: correct typo of description for cv1800 pinctrl: qcom: spmi-mpp: Add PM8937 compatible dt-bindings: pinctrl: qcom,pmic-mpp: Document PM8937 compatible pinctrl: qcom-pmic-gpio: add support for PM8937 dt-bindings: pinctrl: qcom,pmic-gpio: add PM8937 pinctrl: Use of_property_present() for non-boolean properties ...
2024-11-07Merge tag 'intel-pinctrl-v6.13-2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v6.13-2 This includes following Intel pinctrl changes for v6.13 merge window: - Expose DSW community on Elkhart Lake. - Elaborate in the code comment the pull bias settings. Both have been in linux-next with no reported issues. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-11-05pinctrl: elkhartlake: Add support for DSW communityAndy Shevchenko
Hardware has a DSW (Deep Sleep Well) community that might be exposed by some BIOSes. Add support for it in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2024-11-05pinctrl: intel: Add a human readable decoder for pull bias valuesAndy Shevchenko
Add a human readable decoder for pull bias values in the comment. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2024-10-11pinctrl: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/pinctrl to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/20241007205803.444994-8-u.kleine-koenig@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-10-03pinctrl: intel: platform: Add Panther Lake to the list of supportedAndy Shevchenko
Intel Panther Lake is supported by the generic platform driver, so add it to the list of supported in Kconfig. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2024-09-30pinctrl: intel: platform: use semicolon instead of comma in ncommunities ↵Javier Carrasco
assignment Substitute the comma with a semicolon in the `ncommunities` assignment for better readability and consistency with common C coding style. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2024-09-30pinctrl: intel: platform: fix error path in device_for_each_child_node()Javier Carrasco
The device_for_each_child_node() loop requires calls to fwnode_handle_put() upon early returns to decrement the refcount of the child node and avoid leaking memory if that error path is triggered. There is one early returns within that loop in intel_platform_pinctrl_prepare_community(), but fwnode_handle_put() is missing. Instead of adding the missing call, the scoped version of the loop can be used to simplify the code and avoid mistakes in the future if new early returns are added, as the child node is only used for parsing, and it is never assigned. Cc: stable@vger.kernel.org Fixes: c5860e4a2737 ("pinctrl: intel: Add a generic Intel pin control platform driver") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2024-09-11Merge tag 'intel-pinctrl-v6.12-1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v6.12-1 * Enable High Impedance pin configuration support for Intel pin control * Miscellaneous small improvements here and there The following is an automated git shortlog grouped by driver: baytrail: - Drop duplicate return statement intel: - Constify struct intel_pinctrl parameter - Inline intel_gpio_community_irq_handler() - Introduce for_each_intel_gpio_group() helper et al. - Constify intel_get_community() returned object - Implement high impedance support - Add __intel_gpio_get_direction() helper - Refactor __intel_gpio_set_direction() to be more useful - Move debounce validation out of the lock Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-09-05pinctrl: intel: Constify struct intel_pinctrl parameterAndy Shevchenko
There are a few functions that do not and should not change the state of the pin control object. Constify the respective parameter. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2024-09-04pinctrl: baytrail: Drop duplicate return statementAndy Shevchenko
No need to repeat 'return ret;' inside and outside conditional. Just use one outside conditional for both cases. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2024-09-03pinctrl: intel: Inline intel_gpio_community_irq_handler()Andy Shevchenko
Since we have for_each_intel_pad_group() helper, there is no advantage of having intel_gpio_community_irq_handler(). Inline it into intel_gpio_irq(). Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2024-08-30pinctrl: intel: Introduce for_each_intel_gpio_group() helper et al.Andy Shevchenko
Introduce a helper macro for_each_intel_gpio_group() et al. With those in place, update the users. It reduces the C code base as well as shrinks the binary: add/remove: 0/0 grow/shrink: 4/21 up/down: 39/-621 (-582) Total: Before=15942, After=15360, chg -3.65% Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2024-08-30pinctrl: intel: Constify intel_get_community() returned objectAndy Shevchenko
There is nothing prevents us from constifying intel_get_community() returned object. Do it to make code more robust. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2024-08-30pinctrl: intel: Implement high impedance supportAndy Shevchenko
Implement high impedance support for Intel pin control hardware. It allows to set high impedance and check it. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2024-08-30pinctrl: intel: Add __intel_gpio_get_direction() helperAndy Shevchenko
Add __intel_gpio_get_direction() helper which provides all possible physical states of the pad. With that done, update current users and make the respective checks consistent. While at it, make the style of anonymous enum kernel documentation consistent. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2024-08-30pinctrl: intel: Refactor __intel_gpio_set_direction() to be more usefulAndy Shevchenko
Refactor __intel_gpio_set_direction() to be more useful, i.e. 1) use one parameter per each direction to support all combinatios; 2) move IO to the only user that needs it. With that done, update current users and deduplicate existing code. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2024-08-30pinctrl: intel: Move debounce validation out of the lockAndy Shevchenko
There is no need to validate debounce value under the lock. Move it outside. It also results in a smaller binary: add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-11 (-11) Total: Before=15374, After=15363, chg -0.07% Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2024-07-31pinctrl: meteorlake: Add Arrow Lake-H/U ACPI IDMika Westerberg
Intel Arrow Lake-H/U has the same GPIO hardware than Meteor Lake-P but the ACPI ID is different. Add this new ACPI ID to the list of supported devices. Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2024-04-08pinctrl: baytrail: Add pinconf group for uart3Hans de Goede
GPIO_S0_SC57 / GPIO_S0_SC61 can be muxed to PCU_UART_TXD / PCU_UART_RXD, add a pinconf group for this. On Bay Trail board schematics using these pins as UART these are called UART3_TXD / UART3_RXD, name the pinconf group "uart3_grp" to be consistent with the schematics. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2024-04-08pinctrl: baytrail: Fix selecting gpio pinctrl stateHans de Goede
For all the "score" pin-groups all the intel_pingroup-s to select the non GPIO function are re-used for byt_score_gpio_groups[]. But this is incorrect since a pin-group includes the mode setting, which for the non GPIO functions generally is 1, where as to select the GPIO function mode must be set to 0. So the GPIO function needs separate intel_pingroup-s with their own mode value of 0. Add a new PIN_GROUP_GPIO macro which adds a foo_gpio entry to each pin-group defined this way and update byt_score_gpio_groups[] to point to the new foo_gpio entries. The "sus" usb_oc_grp usb_ulpi_grp and pcu_spi_grp pin-groups are special because these have a non 0 mode value to select the GPIO functions and these already have matching foo_gpio pin-groups, leave these are unchanged. The pmu_clk "sus" groups added in commit 2f46d7f7e959 ("pinctrl: baytrail: Add pinconf group + function for the pmu_clk") do need to use the new PIN_GROUP_GPIO macro. Fixes: 2f46d7f7e959 ("pinctrl: baytrail: Add pinconf group + function for the pmu_clk") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2024-02-19pwm: lpss-*: Make use of devm_pwmchip_alloc() functionUwe Kleine-König
This prepares the pwm-lpss drivers to further changes of the pwm core outlined in the commit introducing devm_pwmchip_alloc(). There is no intended semantical change and the driver should behave as before. Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/b567ab5dd992e361eb884fa6c2cac11be9c7dde3.1707900770.git.u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2023-12-18Merge tag 'intel-pinctrl-v6.8-1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v6.8-1 * New agnostic driver to support Lunar Lake and newer platforms * New driver for Intel Meteor Point-S (PCH for Meteor Lake-S) * Update drivers to use new PM helpers * Use RAII for locking in a few drivers (Raag, Andy) * Reduce locking scope in some functions (Raag) * Miscellaneous cleanups (Raag) The following is an automated git shortlog grouped by driver: alderlake: - Switch to use Intel pin control PM ops baytrail: - Simplify code with cleanup helpers - Move default strength assignment to a switch-case - Factor out byt_gpio_force_input_mode() - Fix types of config value in byt_pin_config_set() broxton: - Switch to use Intel pin control PM ops cannonlake: - Switch to use Intel pin control PM ops cedarfork: - Switch to use Intel pin control PM ops denverton: - Switch to use Intel pin control PM ops elkhartlake: - Switch to use Intel pin control PM ops emmitsburg: - Switch to use Intel pin control PM ops geminilake: - Switch to use Intel pin control PM ops icelake: - Switch to use Intel pin control PM ops intel: - Add Intel Meteor Point pin controller and GPIO support - use the correct _PM_OPS() export macro - Add a generic Intel pin control platform driver - Revert "Unexport intel_pinctrl_probe()" - allow independent COMPILE_TEST - Refactor intel_pinctrl_get_soc_data() - Move default strength assignment to a switch-case - Make PM ops functions static - Provide Intel pin control wide PM ops structure jasperlake: - Switch to use Intel pin control PM ops lakefield: - Switch to use Intel pin control PM ops lewisburg: - Switch to use Intel pin control PM ops lynxpoint: - Simplify code with cleanup helpers meteorlake: - Switch to use Intel pin control PM ops sunrisepoint: - Switch to use Intel pin control PM ops tangier: - simplify locking using cleanup helpers - Move default strength assignment to a switch-case - Enable 910 Ohm bias tigerlake: - Switch to use Intel pin control PM ops Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-15pinctrl: intel: Add Intel Meteor Point pin controller and GPIO supportAndy Shevchenko
This driver supports pinctrl/GPIO hardware found on Intel Meteor Point (a Meteor Lake PCH) providing users a pinctrl and GPIO interfaces including GPIO interrupts. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-12-08pinctrl: baytrail: use gpiochip_dup_line_label()Bartosz Golaszewski
Use the new gpiochip_dup_line_label() helper to safely retrieve the descriptor label. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2023-11-24pinctrl: baytrail: Simplify code with cleanup helpersAndy Shevchenko
Use macros defined in linux/cleanup.h to automate resource lifetime control in the driver. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-11-24pinctrl: baytrail: Move default strength assignment to a switch-caseAndy Shevchenko
When ->pin_config_set() is called from the GPIO library (assumed GpioIo() ACPI resource), the argument can be 1, when, for example, PullDefault is provided. In such case we supply sane default in the driver. Move that default assingment to a switch-case, so it will be consolidated in one place. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-11-24pinctrl: baytrail: Factor out byt_gpio_force_input_mode()Andy Shevchenko
There is a piece of code that it being used at least twice. Factor it out. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-11-24pinctrl: baytrail: Fix types of config value in byt_pin_config_set()Andy Shevchenko
When unpacked, the config value is split to two of different types. Fix the types accordingly. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-24pinctrl: lynxpoint: Simplify code with cleanup helpersAndy Shevchenko
Use macros defined in linux/cleanup.h to automate resource lifetime control in the driver. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-24pinctrl: tangier: simplify locking using cleanup helpersRaag Jadav
Use lock guards from cleanup.h to simplify locking. Signed-off-by: Raag Jadav <raag.jadav@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-22pinctrl: intel: use the correct _PM_OPS() export macroRaag Jadav
Since we don't have runtime PM handles here, we should be using EXPORT_NS_GPL_DEV_SLEEP_PM_OPS() macro, so that the compiler can discard it in case CONFIG_PM_SLEEP=n. Fixes: b10a74b5c0c1 ("pinctrl: intel: Provide Intel pin control wide PM ops structure") Signed-off-by: Raag Jadav <raag.jadav@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-14pinctrl: intel: Add a generic Intel pin control platform driverAndy Shevchenko
New generations of Intel platforms will provide better description of the pin control devices in the ACPI tables. Hence, we may provide a generic pin control platform driver to cover all of them. Currently the following Intel SoCs / platforms require this to be functional: - Lunar Lake Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-14pinctrl: intel: Revert "Unexport intel_pinctrl_probe()"Andy Shevchenko
In order to prepare for a new coming driver export the original intel_pinctrl_probe() again. This reverts commit 0dd519e3784b13befa1cdfeff847a0885b06650f. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13pinctrl: intel: allow independent COMPILE_TESTRaag Jadav
Now that we have completed the transition to standard ACPI helpers for the entire Intel pinctrl tree, we can detach COMPILE_TEST from ACPI dependency. Signed-off-by: Raag Jadav <raag.jadav@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13pinctrl: intel: Refactor intel_pinctrl_get_soc_data()Andy Shevchenko
Refactor intel_pinctrl_get_soc_data() to drop initial assignment of the data variable. It's only used in ACPI case and instead we may always assign it there as the ACPI ID table has the terminator entry that has driver data set to NULL. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13pinctrl: intel: Move default strength assignment to a switch-caseAndy Shevchenko
iWhen ->pin_config_set() is called from the GPIO library (assumed GpioIo() ACPI resource), the argument can be 1, when, for example, PullDefault is provided. In such case we supply sane default in the driver. Move that default assingment to a switch-case, so it will be consolidated in one place. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13pinctrl: tangier: Move default strength assignment to a switch-caseAndy Shevchenko
iWhen ->pin_config_set() is called from the GPIO library (assumed GpioIo() ACPI resource), the argument can be 1, when, for example, PullDefault is provided. In such case we supply sane default in the driver. Move that default assingment to a switch-case, so it will be consolidated in one place. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13pinctrl: tangier: Enable 910 Ohm biasAndy Shevchenko
Family 7 (I2C) supports special bias value, i.e. 910 Ohm. Enable it for configuring pin. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13pinctrl: intel: Make PM ops functions staticAndy Shevchenko
No more users outside of the main module. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231030120734.2831419-18-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13pinctrl: tigerlake: Switch to use Intel pin control PM opsAndy Shevchenko
The main driver conditionally exports the PM ops structure. Switch this driver to use it instead of customly wrapped one. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231030120734.2831419-17-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13pinctrl: sunrisepoint: Switch to use Intel pin control PM opsAndy Shevchenko
The main driver conditionally exports the PM ops structure. Switch this driver to use it instead of customly wrapped one. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231030120734.2831419-16-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13pinctrl: meteorlake: Switch to use Intel pin control PM opsAndy Shevchenko
The main driver conditionally exports the PM ops structure. Switch this driver to use it instead of customly wrapped one. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231030120734.2831419-15-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13pinctrl: lewisburg: Switch to use Intel pin control PM opsAndy Shevchenko
The main driver conditionally exports the PM ops structure. Switch this driver to use it instead of customly wrapped one. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231030120734.2831419-14-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13pinctrl: lakefield: Switch to use Intel pin control PM opsAndy Shevchenko
The main driver conditionally exports the PM ops structure. Switch this driver to use it instead of customly wrapped one. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231030120734.2831419-13-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13pinctrl: jasperlake: Switch to use Intel pin control PM opsAndy Shevchenko
The main driver conditionally exports the PM ops structure. Switch this driver to use it instead of customly wrapped one. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231030120734.2831419-12-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13pinctrl: icelake: Switch to use Intel pin control PM opsAndy Shevchenko
The main driver conditionally exports the PM ops structure. Switch this driver to use it instead of customly wrapped one. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231030120734.2831419-11-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13pinctrl: geminilake: Switch to use Intel pin control PM opsAndy Shevchenko
The main driver conditionally exports the PM ops structure. Switch this driver to use it instead of customly wrapped one. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231030120734.2831419-10-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13pinctrl: emmitsburg: Switch to use Intel pin control PM opsAndy Shevchenko
The main driver conditionally exports the PM ops structure. Switch this driver to use it instead of customly wrapped one. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231030120734.2831419-9-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-11-13pinctrl: elkhartlake: Switch to use Intel pin control PM opsAndy Shevchenko
The main driver conditionally exports the PM ops structure. Switch this driver to use it instead of customly wrapped one. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20231030120734.2831419-8-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
generated by cgit (git 2.34.1) at 2025-04-02 11:59:53 +0000