summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/renesas/sh_pfc.h
AgeCommit message (Collapse)Author
2022-07-05pinctrl: renesas: Initial R8A779G0 (R-Car V4H) PFC supportLUU HOAI
This patch adds initial pinctrl support for the R-Car V4H (R8A779G0) SoC, including bias, drive strength and voltage control. This patch was created based on the Rev.0.51 datasheet. Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [Morimoto: merge Kihara-san's MODSEL8 fixup patch, cleanup white space, care about reserved bits on each configs, fixup comments, etc.] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87czepty0j.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-07-05pinctrl: renesas: Add PORT_GP_CFG_13 macrosKuninori Morimoto
Add PORT_GP_CFG_13() and PORT_GP_13() helper macros, to be used by the r8a779g0 subdriver. Based on a larger patch in the BSP by LUU HOAI. Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87edz5ty0r.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05pinctrl: renesas: rmobile: Mark unused PORTCR bits reservedGeert Uytterhoeven
The PULMD bits and the SEC bit in the PORTCR register descriptions on SH/R-Mobile SoCs are either unused or unsupported. Describe them as reserved bits using a negative field width value, and drop the corresponding dummy enum IDs. This reduces kernel size by 2832 (R-Mobile APE6), 2544 (R-Mobile A1), and/or 3228 (SH-Mobile AG5) bytes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1b123d8f04c2314d5a7a87004971868ba2176499.1649865241.git.geert+renesas@glider.be
2022-05-05pinctrl: renesas: Add shorthand for reserved register fieldsGeert Uytterhoeven
Currently, reserved register fields must be fully described using dummy enum IDs (zeroes), one for each possible state (2^bits states). Add support for describing reserved fields using negative field width values as shorthands, thus removing the need for dummy values. Apart from the obvious size reduction due to the removal of the dummy values, this will also enable merging adjacent reserved fields into a single field, reducing the number of fields to describe, and thus kernel size. Update the checker accordingly. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/cad7c92ef039d9a4d039807efc15886a7aa862be.1649865241.git.geert+renesas@glider.be
2022-04-20pinctrl: renesas: Allow up to 10 fields for drive_regsWolfram Sang
Needed to support R-Car E3 and RZ/G2E drive regs. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220320092542.2308-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-04-19pinctrl: renesas: Simplify multiplication/shift logicGeert Uytterhoeven
"a * (1 << b)" == "a << b". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/31eaa3226c61ecf653e2b031307eea42a9a3d54e.1645460548.git.geert+renesas@glider.be
2022-02-25pinctrl: renesas: Initial R8A779F0 PFC supportGeert Uytterhoeven
Add initial Pin Function Controller (PFC) support for the Renesas R-Car S4-8 (R8A779F0) SoC, including bias, drive strength and voltage control. Based on a larger patch in the BSP by LUU HOAI. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/fd8201da404b7b0897130b254380ffc97f437266.1645457792.git.geert+renesas@glider.be
2022-02-25pinctrl: renesas: Add PORT_GP_CFG_19 macrosGeert Uytterhoeven
Add PORT_GP_CFG_19() and PORT_GP_19() helper macros, to be used by the r8a779f0 subdriver. Based on a larger patch in the BSP by LUU HOAI. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/f7fc711d065f78911bac1b616880ba3dbc858158.1645457792.git.geert+renesas@glider.be
2022-02-22pinctrl: renesas: Pass sh_pfc_soc_info to rcar_pin_to_bias_reg()Geert Uytterhoeven
Currently rcar_pin_to_bias_reg() takes a struct sh_pfc pointer, which is only available after the pin control driver has been initialized, thus preventing the checker from calling this function for validating consistency of the pin control tables. Fix this by replacing the parameter by a struct sh_pfc_soc_info pointer. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/3065a12dde606bacec9e5f14f10cabeaae75e265.1640270559.git.geert+renesas@glider.be
2022-02-22pinctrl: renesas: Factor out .pin_to_portcr() address handlingGeert Uytterhoeven
All implementations of the .pin_to_portcr() method implement the same conversion from Port Control Register offset to virtual address. Factor it out into the two callers. Remove the pfc parameter, as it is no longer used. Note that the failure handling in r8a7740_pin_to_portcr() is pro forma, as the function is never called with an invalid pin number. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/a485d4986a17259256988eb14e3a4c2b8d61c303.1640270559.git.geert+renesas@glider.be
2022-02-22pinctrl: renesas: Remove unused pfc parameter from .pin_to_pocctrl()Geert Uytterhoeven
The pfc parameter of the .pin_to_pocctrl() method was never used. It is a relic of the old I/O voltage handling before commit 8775306dcf48092f ("pinctrl: sh-pfc: refactor voltage setting"). Remove the parameter, as it prevents the checker from calling this function for validating consistency of the pin control tables. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/822133086f32618c7fc920123c6a96f5d4ea7ad6.1640270559.git.geert+renesas@glider.be
2022-02-22pinctrl: renesas: Add generic support for resizable busesGeert Uytterhoeven
The VIN_DATA_PIN_GROUP() macro and vin_data{12,16,} unions are used to define multiple VIN data groups with different numbers of lanes, while referring to a single array of data pins, thus saving memory. However, the same feature would be useful for other resizable buses, like MMC, SDHI, QSPI, LCD, BSC, ... Rework the mechanism for generic use: - Use the new SH_PFC_PIN_GROUP_SUBSET() helper to remove the need for bus-specific unions, - Rename VIN_DATA_PIN_GROUP() to BUS_DATA_PIN_GROUP(), - Rename the macro parameters to better reflect their purposes, - Move the macro up, where it belongs. Update all individual pin control drivers for the above changes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/cccfcfd01eb8ab7a587b084c4ddbf97293bd7291.1640269757.git.geert+renesas@glider.be
2022-02-22pinctrl: renesas: Add generic support for pin group subsetsGeert Uytterhoeven
It is fairly common for the pins in a pin group to be a subset of the pins in another pin group. Add a macro for defining a pin group that refers to a subset of an array of pins. This allows pin groups to share pin data, and thus save memory. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/b56c4257aee1eab698bae2cf7a08aa05775c0a77.1640269757.git.geert+renesas@glider.be
2022-02-22pinctrl: renesas: Rename SH_PFC_PIN_GROUP{,_ALIAS} argsGeert Uytterhoeven
Rename the arguments of the SH_PFC_PIN_GROUP_ALIAS() and SH_PFC_PIN_GROUP() macros, to better reflect their purposes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/495fd5cd910d59489f4c1336e4a02da3679b5ffb.1640269757.git.geert+renesas@glider.be
2022-02-22pinctrl: renesas: Reformat macros defining struct initializersGeert Uytterhoeven
Reformat all macros that define structure initializers, to visually resemble structure definitions: - Move the opening curly brace to the previous line, - Move the closing curly brace to the first position, - Reduce indentation of the block to a single TAB, decreasing the need for line breaks, - Align backslashes for line continuation to the last TAB block where possible, Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/03a1eed3c4f57d7b14ef53ab49e04de10d0e383c.1640269757.git.geert+renesas@glider.be
2021-07-27pinctrl: renesas: Fix pin control matching on R-Car H3e-2GGeert Uytterhoeven
As R-Car H3 ES1.x (R8A77950) and R-Car ES2.0+ (R8A77951) use the same compatible value, the pin control driver relies on soc_device_match() with soc_id = "r8a7795" and the (non)matching of revision = "ES1.*" to match with and distinguish between the two SoC variants. The corresponding entries in the normal of_match_table are present only to make the optional sanity checks work. The R-Car H3e-2G (R8A779M1) SoC is a different grading of the R-Car H3 ES3.0 (R8A77951) SoC. It uses the same compatible values for individual devices, but has an additional compatible value for the root node. When running on an R-Car H3e-2G SoC, soc_device_match() with soc_id = "r8a7795" does not return a match. Hence the pin control driver falls back to the normal of_match_table, and, as the R8A77950 entry is listed first, incorrectly uses the sub-driver for R-Car H3 ES1.x. Fix this by moving the entry for R8A77951 before the entry for R8A77950. Simplify sh_pfc_quirk_match() to only handle R-Car H3 ES1,x, as R-Car H3 ES2.0+ can now be matched using the normal of_match_table as well. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/6cdc5bfa424461105779b56f455387e03560cf66.1626707688.git.geert+renesas@glider.be
2021-07-13pinctrl: renesas: r8a77995: Add bias pinconf supportGeert Uytterhoeven
Implement support for pull-up (most pins, excl. DU_DOTCLKIN0) and pull-down (most pins, excl. JTAG) handling for the R-Car D3 SoC, using some parts from the common R-Car bias handling, which requires making rcar_pin_to_bias_reg() public. R-Car D3 needs special handling for the NFRE# (GP_3_0) and NFWE# (GP_3_1) pins. Unlike all other pins, they are controlled by different bits in the LSI pin pull-up/down control register (PUD2) than in the LSI pin pull-enable register (PUEN2). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/04aad2b0bf82a32fb08e5e21e4ac1fb03452724f.1625064076.git.geert+renesas@glider.be
2021-03-24pinctrl: renesas: Add support for R-Car SoCs with pull-down only pinsGeert Uytterhoeven
Currently, the common R-Car bias handling supports pin controllers with either: 1. Separate pin Pull-Enable (PUEN) and pin Pull-Up/Down control (PUD) registers, for controlling both pin pull-up and pin pull-down, 2. A single pin Pull-Up control register (PUPR), for controlling pin pull-up. Add support for a variant of #2, where some bits in the single pin Pull-Up control register (PUPR) control pin pull-down instead of pin pull-up. This is the case for the "ASEBRK#/ACK" pin on R-Car M2-W, M2-N, and E2, and the "ACK" pin on RZ/G1M, RZ/G1N, RZ/G1E, and RZ/G1C. To describe such a register, SoC-specific drivers need to provide two instances of pinmux_bias_reg: a first one with the puen field filled in, listing pins with pull-up functionality, and a second one with the pud field filled in, listing pins with pull-down functionality. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210303132619.3938128-6-geert+renesas@glider.be
2021-03-24pinctrl: renesas: Add PORT_GP_CFG_7 macrosGeert Uytterhoeven
Add PORT_GP_CFG_7() and PORT_GP_7() helper macros, to be used by the r8a7791 subdriver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210303132619.3938128-5-geert+renesas@glider.be
2021-03-24pinctrl: renesas: Factor out common R-Mobile bias handlingGeert Uytterhoeven
The pin control sub-drivers for SH/R-Mobile SoCs contain almost identical bias handling. The only SoC-specific part is the mapping from pin numbers to PORTnCR registers. Reduce code duplication by factoring out the bias handling to the common pinctrl.c code. Use a callback to handle the pin/register mapping. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210303132619.3938128-4-geert+renesas@glider.be
2021-03-24pinctrl: renesas: Move R-Car bias helpers to sh_pfc.hGeert Uytterhoeven
The Renesas Pin Function Controller driver uses two header files: - sh_pfc.h, for use by both core code and SoC-specific drivers, - core.h, for internal use by the core code only. Hence move the R-Car bias helper declarations from core.h to sh_pfc.h, and drop the inclusion of core.h from SoC-specific drivers that no longer need it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210303132619.3938128-3-geert+renesas@glider.be
2021-01-14pinctrl: renesas: Initial R8A779A0 (V3U) PFC supportUlrich Hecht
This patch adds initial pinctrl support for the R8A779A0 (V3U) SoC, including bias, drive strength and voltage control. Based on patch by LUU HOAI <hoai.luu.ub@renesas.com>. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210112165912.30876-5-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: Add PORT_GP_CFG_{2,31} macrosUlrich Hecht
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210112165912.30876-4-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: Add I/O voltage level flagUlrich Hecht
This patch adds config macros describing the voltage levels available on a pin. The current default (3.3V/1.8V) maps to zero to avoid having to change existing PFC implementations. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210112165912.30876-3-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: Implement unlock register masksUlrich Hecht
The V3U SoC has several unlock registers, one per register group. They reside at offset zero in each 0x200 bytes-sized block. To avoid adding yet another table to the PFC implementation, this patch adds the option to specify an address mask instead of the fixed address in sh_pfc_soc_info::unlock_reg. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210112165912.30876-2-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-11-13pinctrl: renesas: Protect GPIO leftovers by CONFIG_PINCTRL_SH_FUNC_GPIOGeert Uytterhoeven
On SuperH and ARM SH/R-Mobile SoCs, the pin control driver handles GPIOs, too. To reduce code size when compiling a kernel supporting only modern SoCs, most, but not all, of the GPIO functionality is protected by checks for CONFIG_PINCTRL_SH_FUNC_GPIO. Factor out the remaining parts when not needed: 1. sh_pfc_soc_info.{in,out}put describe GPIO pins that have input resp. output capabilities (SuperH and SH/R-Mobile). 2. sh_pfc_soc_info.gpio_irq{,_size} describe the mapping from GPIO pins to interrupt numbers (SH/R-Mobile). 3. sh_pfc_gpio_set_direction() configures GPIO direction, called from the GPIO driver through pinctrl_gpio_direction_{in,out}put() (SH/R-Mobile). Unfortunately this function cannot just be moved to drivers/pinctrl/renesas/gpio.c, as it relies on knowledge of sh_pfc_pinctrl, which is internal to drivers/pinctrl/renesas/pinctrl.c. While code size reduction is minimal, this does help in documenting depencies. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201028151637.1734130-9-geert+renesas@glider.be
2020-11-13pinctrl: renesas: Reorder struct sh_pfc_pin to remove holeGeert Uytterhoeven
On arm64, pointer size and alignment is 64-bit, hence a 4-byte hole is present in between the enum_id and name members of the sh_pfc_pin structure. Get rid of this hole by sorting the structure's members by decreasing size. This saves up to 1.5 KiB per enabled SoC, and reduces the size of a kernel including support for all R-Car Gen3 SoCs by more than 10 KiB. This has no size impact on SH and arm32. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201028151637.1734130-4-geert+renesas@glider.be
2020-09-15pinctrl: Rename sh-pfc to renesasGeert Uytterhoeven
The drivers/pinctrl/sh-pfc subdirectory was originally created to group pin control drivers for various Renesas SuperH and SH-Mobile platforms. However, the name "sh-pfc" no longer reflects its contents, as the directory now contains pin control drivers for Renesas SuperH, ARM32, and ARM64 SoCs. Hence rename the subdirectory from drivers/pinctrl/sh-pfc to drivers/pinctrl/renesas, and the related Kconfig symbol from PINCTRL_SH_PFC to PINCTRL_RENESAS. Rename the git branch in MAINTAINERS, too, for consistency. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200909131534.12897-3-geert+renesas@glider.be
generated by cgit (git 2.34.1) at 2025-03-31 01:44:50 +0000